UBQS-ENTITY-ALARM-MIB
22 objects
The UBQS-ENTITY-ALARM-MIB is used to monitor and configure status of alarms for Environment Monitor.
Imported Objects
| SNMPv2-SMI | Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | DisplayString TEXTUAL-CONVENTION TimeStamp TruthValue |
| UBQS-SMI | ubiMgmtv2 |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.7800.100.28 | IdentityubiEntityAlarmMIB | The UBQS-ENTITY-ALARM-MIB is used to monitor and configure status of alarms for Environment Monitor. | ||
| 1.3.6.1.4.1.7800.100.28.0 | NodeubiEntityAlarmMIBNotificationPrefix | |||
| 1.3.6.1.4.1.7800.100.28.0.0 | NodeubiEntityAlarmMIBNotifications | |||
| 1.3.6.1.4.1.7800.100.28.0.0.1 | NotificationubiAlarmAsserted | current | The agent generates this trap when a physical entity asserts an alarm. | |
| 1.3.6.1.4.1.7800.100.28.0.0.2 | NotificationubiAlarmCleared | current | The agent generates this trap when a physical entity clears a previously asserted alarm. | |
| 1.3.6.1.4.1.7800.100.28.1 | NodeubiEntityAlarmMIBObjects | |||
| 1.3.6.1.4.1.7800.100.28.1.1 | TableubiAlarmContactTable | not-accessible | current | This table contains one row per specific alarm. |
| 1.3.6.1.4.1.7800.100.28.1.1.1 | RowubiAlarmContactEntry | not-accessible | current | Information about a specific alarm. each index corresponds to each alarm contact and index '0' means whole alarm contacts. |
| 1.3.6.1.4.1.7800.100.28.1.1.1.1 | ColumnubiAlarmContactIndex | read-only | current | This object uniquely identifies an alarm description. |
| 1.3.6.1.4.1.7800.100.28.1.1.1.2 | ColumnubiAlarmContactDescr | read-write | current | This object specifies a human-readable message describing the specific alarm. |
| 1.3.6.1.4.1.7800.100.28.1.1.1.3 | ColumnubiAlarmContactSeverity | read-write | current | This object specifies the severity associated with the specific alarm. Valid values are : critical(1) severity in critical major(2) severity in major minor(3) … |
| 1.3.6.1.4.1.7800.100.28.1.1.1.4 | ColumnubiAlarmContactTrigger | read-write | current | This object specifies the trigger state associated with the specific alarm. |
| 1.3.6.1.4.1.7800.100.28.1.1.1.5 | ColumnubiAlarmContactLastAlarmStatus | read-only | current | This object specifies the last alarm status associated with the specific alarm. |
| 1.3.6.1.4.1.7800.100.28.1.1.1.6 | ColumnubiAlarmContactLastAlarmStamp | read-only | current | This object specifies the system clock at the time the alarm was generated. |
| 1.3.6.1.4.1.7800.100.28.1.2 | NodeubiEntityAlarmNotificationEnables | |||
| 1.3.6.1.4.1.7800.100.28.1.2.1 | ScalarubiAlarmAssertedEnabled | read-write | current | This variable indicates whether the system produces the following notifications: ubiEntityFRUInserted, ubiEntityFRURemoved. A false value will prevent these no… |
| 1.3.6.1.4.1.7800.100.28.1.2.2 | ScalarubiAlarmClearedEnabled | read-write | current | This variable indicates whether the system produces the following notification: ubiEntSensorThreshold. A false value will prevent these notifications from bein… |
| 1.3.6.1.4.1.7800.100.28.2 | NodeubiEntityAlarmMIBConformance | |||
| 1.3.6.1.4.1.7800.100.28.2.2 | NodeubiEntityAlarmMIBGroups | |||
| 1.3.6.1.4.1.7800.100.28.2.2.1 | GroupubiEntityAlarmMIBContactGroup | current | The collection of objects which are used to get the operational state and redundancy state of the modules | |
| 1.3.6.1.4.1.7800.100.28.2.2.2 | GroupubiEntityAlarmMIBNotificationGroup | current | The collection of objects which are used to send a notification. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| AlarmSeverity | INTEGER { critical(1), major(2), minor(3) } | current | Alarm states for severity. Valid values are : critical(1) severity in critical major(2) severity in major minor(3) severity in minor |