MIB Viewer

UBQS-INTERFACE-MIB

159 objects
A MIB module for the physical interface in IF-MIB (RFC2863).
Imported Objects
ENTITY-MIBentPhysicalIndex
IF-MIBifAdminStatus ifIndex ifName ifOperStatus ifType InterfaceIndexOrZero
Q-BRIDGE-MIBVlanIndex
SNMP-FRAMEWORK-MIBSnmpAdminString
SNMPv2-CONFMODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP
SNMPv2-SMICounter32 Gauge32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32
SNMPv2-TCDisplayString RowStatus TEXTUAL-CONVENTION TimeStamp TruthValue
UBQS-SMIubiMgmtv2
UBQS-TC MISSINGIfOperStatusReason UbiBridgeId UbiPortList Unsigned64
OIDNameAccessStatusDescription
1.3.6.1.4.1.7800.100.4IdentityubiInterfaceMIBA MIB module for the physical interface in IF-MIB (RFC2863).
1.3.6.1.4.1.7800.100.4.0NodeubiInterfaceMIBNotificationPrefix
1.3.6.1.4.1.7800.100.4.0.0NodeubiInterfaceNotifications
1.3.6.1.4.1.7800.100.4.0.0.1NotificationubiPortAutoNegoFaultcurrentA ubiPortAutoNegoFault notification is sent at auto negotiation failure for a particular physical port.
1.3.6.1.4.1.7800.100.4.0.1NodeubiTrafficControlNotifications
1.3.6.1.4.1.7800.100.4.0.1.1NotificationubiLoadMonitorRisingAlarmcurrentA ubiLoadMonitorRisingAlarm notification is sent when the ubiLoadMonitorValue crosses its rising threshold.
1.3.6.1.4.1.7800.100.4.0.1.2NotificationubiLoadMonitorFallingAlarmcurrentA ubiLoadMonitorRisingAlarm notification is sent when the ubiLoadMonitorValue crosses its falling threshold.
1.3.6.1.4.1.7800.100.4.0.1.3NotificationubiTrafficControlRisingAlarmcurrentA ubiTrafficControlRisingAlarm is sent when ubiTrafficControlOneMinRate is greater than current threshold.
1.3.6.1.4.1.7800.100.4.0.1.4NotificationubiTrafficControlFallingAlarmcurrentA ubiTrafficControlFallingAlarm is sent when ubiTrafficControlOneMinRate is less than current threshold.
1.3.6.1.4.1.7800.100.4.1NodeubiInterfaceMIBObjects
1.3.6.1.4.1.7800.100.4.1.1NodeubiIfNotificationEnables
1.3.6.1.4.1.7800.100.4.1.1.1NodeubiGrp1
1.3.6.1.4.1.7800.100.4.1.1.1.1ScalarubiLinkUpDownEnabledread-writecurrentThis variable indicates whether the system produces the notification of linkup/down.
1.3.6.1.4.1.7800.100.4.1.1.2NodeubiGrp2
1.3.6.1.4.1.7800.100.4.1.1.2.1ScalarubiPortAutoNegoFaultEnabledread-writecurrentThis variable indicates whether the system produces the notification of the auto negotiation failure for a particular physical port.
1.3.6.1.4.1.7800.100.4.1.1.2.2ScalarubiLoadMonitorAlarmEnabledread-writecurrentThis variable indicates whether the system produces the notification of ubiLoadMonitorRisingAlarm and ubiLoadMonitorFallingAlarm.
1.3.6.1.4.1.7800.100.4.1.1.2.3ScalarubiTrafficControlAlarmEnabledread-writecurrentThis variable indicates whether the system produces the notification of ubiTrafficControlRisingAlarm and ubiTrafficControlFallingAlarm.
1.3.6.1.4.1.7800.100.4.1.2TableubiPortTablenot-accessiblecurrentThis table contains objects which provide more information about physical interface.
1.3.6.1.4.1.7800.100.4.1.2.1RowubiPortEntrynot-accessiblecurrentAn entry containing management information applicable to a particular physical interface.
1.3.6.1.4.1.7800.100.4.1.2.1.1ColumnubiPortNameread-onlycurrentThe physical port name.
1.3.6.1.4.1.7800.100.4.1.2.1.2ColumnubiPortTyperead-onlycurrentThe type of the physical port.
1.3.6.1.4.1.7800.100.4.1.2.1.3ColumnubiPortOperStatusread-onlycurrentThe current operational status of the port. down(1) is down up(2) is up disable(3) is administratively down
1.3.6.1.4.1.7800.100.4.1.2.1.4ColumnubiPortDuplexread-onlycurrentIndicates whether the port is operating in half- duplex, full-duplex or auto negotiation mode.
1.3.6.1.4.1.7800.100.4.1.2.1.5ColumnubiPortSpeedread-onlycurrentThe current operational speed of the port.
1.3.6.1.4.1.7800.100.4.1.2.1.6ColumnubiPortAdminDuplexread-writecurrentThe desired duplex of the port.
1.3.6.1.4.1.7800.100.4.1.2.1.7ColumnubiPortAdminSpeedread-writecurrentThe desired speed of the port.
1.3.6.1.4.1.7800.100.4.1.2.1.8ColumnubiPortMturead-writecurrentThe MTU value of the port.
1.3.6.1.4.1.7800.100.4.1.2.1.9ColumnubiPortL2L3IfStateread-writecurrentThe operational mode of the port whether the port is layer 2 or layer 3.
1.3.6.1.4.1.7800.100.4.1.2.1.10ColumnubiPortAutoNegoFaultStateaccessible-for-notifycurrentThe link is down due to auto negotiation failure. This state indicates the state of auto negotiation failure for a particular port. But it's used for notificat…
1.3.6.1.4.1.7800.100.4.1.2.1.11ColumnubiPortResetread-writecurrentReset the physical port.
1.3.6.1.4.1.7800.100.4.1.2.1.12ColumnubiPortLocalSwitchingread-writecurrentPort local-switching
1.3.6.1.4.1.7800.100.4.1.3NodeubiPortExt
1.3.6.1.4.1.7800.100.4.1.3.1TableubiPortExtTablenot-accessiblecurrentThis table contains objects which provide more information about physical interface.
1.3.6.1.4.1.7800.100.4.1.3.1.1RowubiPortExtEntrynot-accessiblecurrentAn entry containing management information applicable to a particular physical interface.
1.3.6.1.4.1.7800.100.4.1.3.1.1.1ColumnubiPortGBICStatusread-onlycurrentThe current operational status of the equipped slot.
1.3.6.1.4.1.7800.100.4.1.3.1.1.2ColumnubiPortGBICTyperead-onlycurrentThe current GBIC Type of the equipped slot. none(0): unequipped other(1) : equipped, none of the following list sfp(2) xfp(3) sfp-plus(4)
1.3.6.1.4.1.7800.100.4.1.3.1.1.3ColumnubiPortGBICSerialNumberread-onlycurrentThe serial number of this GBIC.
1.3.6.1.4.1.7800.100.4.1.4NodeubiSwitchPort
1.3.6.1.4.1.7800.100.4.1.4.1TableubiSwitchportTablenot-accessiblecurrentA table contains the information for switchport.
1.3.6.1.4.1.7800.100.4.1.4.1.1RowubiSwitchportEntrynot-accessiblecurrentA list of information for each switchport.
1.3.6.1.4.1.7800.100.4.1.4.1.1.1ColumnubiSwitchportNameread-onlycurrentA textual string containing information about the interface.
1.3.6.1.4.1.7800.100.4.1.4.1.1.2ColumnubiSwitchportModeread-writecurrentA port type. The possible port types are: customerVlanPort(0) - Indicates a port is a C-tag aware port of an enterprise VLAN aware bridge. providerNetworkPort(…
1.3.6.1.4.1.7800.100.4.1.4.1.1.3ColumnubiSwitchportBridgeIdread-writecurrentThis object is used to allocate the bridge group id.
1.3.6.1.4.1.7800.100.4.1.4.1.1.4ColumnubiSwitchportVlanNativeread-writecurrentThe native vlan of a switchport.
1.3.6.1.4.1.7800.100.4.1.4.1.1.5ColumnubiSwitchportVlanDefaultread-writecurrentThe default vlan of a switchport.
1.3.6.1.4.1.7800.100.4.1.4.2TableubiSwitchPortVlanControlTablenot-accessiblecurrentThis table contains the control information of vlan for switchport.
1.3.6.1.4.1.7800.100.4.1.4.2.1RowubiSwitchPortVlanControlEntrynot-accessiblecurrentA list of vlan control for each switchport.
1.3.6.1.4.1.7800.100.4.1.4.2.1.1ColumnubiSwitchportVlanTaggedSetread-writecurrentThe operational set of the switchport for a specific tagged vlan. If a value of set is all(4), the vlan index should be a zero.
1.3.6.1.4.1.7800.100.4.1.4.2.1.2ColumnubiSwitchportVlanUntaggedSetread-writecurrentThe operational set of the switchport for a specific untagged vlan. If a value of set is all(4), the vlan index should be a zero.
1.3.6.1.4.1.7800.100.4.1.4.2.1.3ColumnubiSwitchportVlanEgressTaggedSetread-writecurrentThe operational set of the switchport for a egress tagged vlan.
1.3.6.1.4.1.7800.100.4.1.4.3TableubiSwitchVlanStackingTablenot-accessiblecurrentThis table contains the stacking information of vlan for switchport.
1.3.6.1.4.1.7800.100.4.1.4.3.1RowubiSwitchVlanStackingEntrynot-accessiblecurrentA list of vlan stacking for each switchport.
1.3.6.1.4.1.7800.100.4.1.4.3.1.1ColumnubiVlanStackingModeread-writecurrentvlan-stacking mode
1.3.6.1.4.1.7800.100.4.1.4.3.1.2ColumnubiVlanStackingEthertyperead-writecurrentvlan-stacking ethertype (format : 0xhhhh)
1.3.6.1.4.1.7800.100.4.1.5NodeubiPortTrafficControl
1.3.6.1.4.1.7800.100.4.1.5.1TableubiLoadMonitorTablenot-accessiblecurrentThis table contains the information of load monitoring.
1.3.6.1.4.1.7800.100.4.1.5.1.1RowubiLoadMonitorEntrynot-accessiblecurrentA list of load monitoring configuration.
1.3.6.1.4.1.7800.100.4.1.5.1.1.1ColumnubiLoadMonitorTyperead-onlycurrentThis object specifies the type of load monitoring. For example, If type is input, ubiLoadMonitorVariable should be the particular variable related to the input…
1.3.6.1.4.1.7800.100.4.1.5.1.1.2ColumnubiLoadMonitorIntervalread-createcurrentThe monitoring interval.
1.3.6.1.4.1.7800.100.4.1.5.1.1.3ColumnubiLoadMonitorVariableread-onlycurrentThe object identifier of the particular variable to be sampled for load monitoring. this variable is decided by ubiLoadMonitorType. variable mapping informatio…
1.3.6.1.4.1.7800.100.4.1.5.1.1.4ColumnubiLoadMonitorValueread-onlycurrentThe sampling value of the statistic for the particular variable.
1.3.6.1.4.1.7800.100.4.1.5.1.1.5ColumnubiLoadMonitorCriticalThresholdread-createcurrentThe critical threshold for the sampled statistics.
1.3.6.1.4.1.7800.100.4.1.5.1.1.6ColumnubiLoadMonitorMajorThresholdread-createcurrentThe major threshold for the sampled statistics.
1.3.6.1.4.1.7800.100.4.1.5.1.1.7ColumnubiLoadMonitorUnitread-onlycurrentThe unit of the sampled statistics and threshold value.
1.3.6.1.4.1.7800.100.4.1.5.1.1.8ColumnubiLoadMonitorAlarmTypeaccessible-for-notifycurrentThe alarm type. This object is used for notification only.
1.3.6.1.4.1.7800.100.4.1.5.1.1.9ColumnubiLoadMonitorRowStatusread-createcurrentThe row status of this entry.
1.3.6.1.4.1.7800.100.4.1.5.1.1.10ColumnubiLoadMonitorAlarmZoneaccessible-for-notifycurrentThis object indicates the current alarm zone.
1.3.6.1.4.1.7800.100.4.1.5.2NodeubiTrafficControl
1.3.6.1.4.1.7800.100.4.1.5.2.1NodeubiTrafficControlConfig
1.3.6.1.4.1.7800.100.4.1.5.2.1.1ScalarubiTrafficControlReportIntervalread-writecurrentInterval when alarm is up/down according to traffic count
1.3.6.1.4.1.7800.100.4.1.5.2.1.2ScalarubiTrafficControlObservingPeriodread-writecurrentPeriod for counting traffic
1.3.6.1.4.1.7800.100.4.1.5.2.1.3ScalarubiTrafficControlHighAlarmModeread-writecurrentAction that is operated when traffic is over high-threshold
1.3.6.1.4.1.7800.100.4.1.5.2.1.4ScalarubiTrafficControlLowAlarmModeread-writecurrentAction that is operated when traffic is below low-threshold
1.3.6.1.4.1.7800.100.4.1.5.2.2TableubiTrafficControlTablenot-accessiblecurrentThe table for traffic-control configuration
1.3.6.1.4.1.7800.100.4.1.5.2.2.1RowubiTrafficControlEntrynot-accessiblecurrentThe entry representing traffic-control config. Index description a) ubiTrafficControlIfindex : interface index b) ubiTrafficControlBaseType : base type of traf…
1.3.6.1.4.1.7800.100.4.1.5.2.2.1.1ColumnubiTrafficControlIfindexread-onlycurrentA unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface su…
1.3.6.1.4.1.7800.100.4.1.5.2.2.1.2ColumnubiTrafficControlBaseTyperead-onlycurrentBase type of traffic.
1.3.6.1.4.1.7800.100.4.1.5.2.2.1.3ColumnubiTrafficControlTyperead-onlycurrentType of traffic. Type based on KBPS must be only all(0). remains are only for pps.
1.3.6.1.4.1.7800.100.4.1.5.2.2.1.4ColumnubiTrafficControlDirectionread-onlycurrentDirection of traffic.
1.3.6.1.4.1.7800.100.4.1.5.2.2.1.5ColumnubiTrafficControlHighThresholdread-createcurrentTraffic high-threshold. Type based on KBPS could has threshold less than 1000000.
1.3.6.1.4.1.7800.100.4.1.5.2.2.1.6ColumnubiTrafficControlLowThresholdread-createcurrentTraffic low-threshold. Type based on KBPS could has threshold less than 1000000.
1.3.6.1.4.1.7800.100.4.1.5.2.2.1.7ColumnubiTrafficControlActionread-createcurrentTraffic action type.
1.3.6.1.4.1.7800.100.4.1.5.2.2.1.8ColumnubiTrafficControlStatusread-onlycurrentInterface's current status.
1.3.6.1.4.1.7800.100.4.1.5.2.2.1.9ColumnubiTrafficControlAverageRateread-onlycurrentAverage rate of controlled traffic.
1.3.6.1.4.1.7800.100.4.1.5.2.2.1.10ColumnubiTrafficControlOneMinRateread-onlycurrentRate of controlled traffic per 1 minute.
1.3.6.1.4.1.7800.100.4.1.5.2.2.1.11ColumnubiTrafficControlAlarmCountread-onlycurrentNumber of alarmed times.
1.3.6.1.4.1.7800.100.4.1.5.2.2.1.12ColumnubiTrafficControlLastAlarmTimeread-onlycurrentLast alarmed time
1.3.6.1.4.1.7800.100.4.1.5.2.2.1.13ColumnubiTrafficControlRowStatusread-createcurrentRow Status
1.3.6.1.4.1.7800.100.4.1.5.2.3NodeubiClearTrafficControl
1.3.6.1.4.1.7800.100.4.1.5.2.3.1ScalarubiClearTrafficControlInterfaceread-writecurrentIf value is 0, clear all interface. If value is ifindex, clear specific interface (only physical interface)
1.3.6.1.4.1.7800.100.4.1.5.2.3.2ScalarubiClearTrafficControlBaseTyperead-writecurrentTraffic-control base type. 'none' value means all base type.
1.3.6.1.4.1.7800.100.4.1.5.2.3.3ScalarubiClearTrafficControlTyperead-writecurrentTraffic-control type. Type based on KBPS must be all. 'none' value means all traffic type.
1.3.6.1.4.1.7800.100.4.1.5.2.3.4ScalarubiClearTrafficControlDirectionread-writecurrentTraffic-control direction. 'none' value means all direction.
1.3.6.1.4.1.7800.100.4.1.5.2.3.5ScalarubiClearTrafficControlOperateread-writecurrentclear excute
1.3.6.1.4.1.7800.100.4.1.6NodeubiIfStatistics
1.3.6.1.4.1.7800.100.4.1.6.1TableubiIfEgressQueueStatsTablenot-accessiblecurrentThis table contains the information for egress queue statistics.
1.3.6.1.4.1.7800.100.4.1.6.1.1RowubiIfEgressQueueStatsEntrynot-accessiblecurrentA list of the port that configure cos feild. that port collects the pass and drop statistics for egress queue.
1.3.6.1.4.1.7800.100.4.1.6.1.1.1ColumnubiIfEqStatsQueueIdnot-accessiblecurrentThe queue identifier.
1.3.6.1.4.1.7800.100.4.1.6.1.1.2ColumnubiIfEqStatsPassOctetsread-onlycurrentThe pass counter for bytes.
1.3.6.1.4.1.7800.100.4.1.6.1.1.3ColumnubiIfEqStatsDropOctetsread-onlycurrentThe drop counter for bytes.
1.3.6.1.4.1.7800.100.4.1.6.1.1.4ColumnubiIfEqStatsPassPktsread-onlycurrentThe pass counter for packets.
1.3.6.1.4.1.7800.100.4.1.6.1.1.5ColumnubiIfEqStatsDropPktsread-onlycurrentThe drop counter for packets.
1.3.6.1.4.1.7800.100.4.1.6.1.1.6ColumnubiIfEqStatsQueueDescrread-writecurrentA textual string containing information about the interface's each queue.
1.3.6.1.4.1.7800.100.4.1.6.2TableubiIfStatsTablenot-accessiblecurrentThis table contains the statistics for physical port.
1.3.6.1.4.1.7800.100.4.1.6.2.1RowubiIfStatsEntrynot-accessiblecurrentA Entry contains the statistics of a particular physical port.
1.3.6.1.4.1.7800.100.4.1.6.2.1.1ColumnubiIfStatsInPktsread-onlycurrentThe number of input packets for a given physical port.
1.3.6.1.4.1.7800.100.4.1.6.2.1.2ColumnubiIfStatsOutPktsread-onlycurrentThe number of output packets for a given physical interface.
1.3.6.1.4.1.7800.100.4.1.6.2.1.3ColumnubiIfStatsInCRCErrorsread-onlycurrentThe number of input CRC errors for a given interface.
1.3.6.1.4.1.7800.100.4.1.6.2.1.14ColumnubiIfStatsCounterClearread-writecurrentInitialize the counter
1.3.6.1.4.1.7800.100.4.1.6.2.1.15ColumnubiIfStatsSnmpClearread-writecurrentInitialize the statistics in this table.
1.3.6.1.4.1.7800.100.4.1.6.3TableubiTrafficRateTablenot-accessiblecurrenttraffic rate per interface
1.3.6.1.4.1.7800.100.4.1.6.3.1RowubiTrafficRateEntrynot-accessiblecurrenttraffic rate per interface
1.3.6.1.4.1.7800.100.4.1.6.3.1.1ColumnubiIfStatsInTrafficRateread-onlycurrent
1.3.6.1.4.1.7800.100.4.1.6.3.1.2ColumnubiIfStatsOutTrafficRateread-onlycurrent
1.3.6.1.4.1.7800.100.4.1.7NodeubiPortControl
1.3.6.1.4.1.7800.100.4.1.7.1TableubiFlowControlTablenot-accessiblecurrentThe table of flowcontrol information on physical ports.
1.3.6.1.4.1.7800.100.4.1.7.1.1RowubiFlowControlEntrynot-accessiblecurrentAn entry of flowcontrol information on physical port.
1.3.6.1.4.1.7800.100.4.1.7.1.1.1ColumnubiFlowctrlReceiveread-writecurrentflowcontrol on receive.
1.3.6.1.4.1.7800.100.4.1.7.1.1.2ColumnubiFlowctrlSendread-writecurrentflowcontrol on send
1.3.6.1.4.1.7800.100.4.1.7.1.1.3ColumnubiFlowctrlWatermarkread-writecurrentflowcontrol watermark value
1.3.6.1.4.1.7800.100.4.1.7.2NodeubiRateLimit
1.3.6.1.4.1.7800.100.4.1.7.2.1TableubiRateLimitTablenot-accessiblecurrentThe table of rate-limit information on physical ports
1.3.6.1.4.1.7800.100.4.1.7.2.1.1RowubiRateLimitEntrynot-accessiblecurrentAn entry of rate-limit information on physical port
1.3.6.1.4.1.7800.100.4.1.7.2.1.1.1ColumnubiEgressTrafficRateread-writecurrentegress traffic rate
1.3.6.1.4.1.7800.100.4.1.7.2.1.1.2ColumnubiEgressBucketSizeread-writecurrentegress bucket size
1.3.6.1.4.1.7800.100.4.1.7.2.1.1.3ColumnubiIngressLevelread-writecurrentingress level, range from 0.01 to 100.00
1.3.6.1.4.1.7800.100.4.1.7.2.2TableubiRateLimitQueueEgressTablenot-accessiblecurrentThe table of rate-limit q-egress information on physical ports
1.3.6.1.4.1.7800.100.4.1.7.2.2.1RowubiRateLimitQueueEgressEntrynot-accessiblecurrentAn entry of rate-limit q-egress information on physical port
1.3.6.1.4.1.7800.100.4.1.7.2.2.1.1ColumnubiQueueIdnot-accessiblecurrentqueue id
1.3.6.1.4.1.7800.100.4.1.7.2.2.1.2ColumnubiQueueEgressTrafficRateread-writecurrentq-egress traffic rate
1.3.6.1.4.1.7800.100.4.1.7.2.2.1.3ColumnubiQueueEgressBucketSizeread-writecurrentq-egress bucket size
1.3.6.1.4.1.7800.100.4.1.7.3TableubiStormControlTablenot-accessiblecurrentThe table of storm-control information on physical ports
1.3.6.1.4.1.7800.100.4.1.7.3.1RowubiStormControlEntrynot-accessiblecurrentAn entry of storm-control information on physical port
1.3.6.1.4.1.7800.100.4.1.7.3.1.1ColumnubiBroadcastLevelread-writecurrentbroadcast control level, range from 0.01 to 100.00
1.3.6.1.4.1.7800.100.4.1.7.3.1.2ColumnubiMulticastLevelread-writecurrentmulticast control level, range from 0.01 to 100.00
1.3.6.1.4.1.7800.100.4.1.7.3.1.3ColumnubiUnicastLevelread-writecurrentunicast control level, range from 0.01 to 100.00
1.3.6.1.4.1.7800.100.4.1.7.4NodeubiStormDiscardStats
1.3.6.1.4.1.7800.100.4.1.7.4.1ScalarubiStormDiscardStatsClearread-writecurrentInitialize the counters for discarded packet by Storm-Control.
1.3.6.1.4.1.7800.100.4.1.7.4.2TableubiStormDiscardStatsTablenot-accessiblecurrentThis table contains the statistics of discarded packets by Storm-control on physical ports
1.3.6.1.4.1.7800.100.4.1.7.4.2.1RowubiStormDiscardStatsEntrynot-accessiblecurrentAn entry of storm-control discard statistics on physical port
1.3.6.1.4.1.7800.100.4.1.7.4.2.1.1ColumnubiStormUnicastDiscardsread-onlycurrentThe number of discarded Unicast packets by Storm-control for a given interface.
1.3.6.1.4.1.7800.100.4.1.7.4.2.1.2ColumnubiStormMulticastDiscardsread-onlycurrentThe number of discarded Multicast packets by Storm-control for a given interface.
1.3.6.1.4.1.7800.100.4.1.7.4.2.1.3ColumnubiStormBroadcastDiscardsread-onlycurrentThe number of discarded Broadcast packets by Storm-control for a given interface.
1.3.6.1.4.1.7800.100.4.1.7.4.2.1.4ColumnubiStormTotalDiscardsread-onlycurrentThe Total number of discarded packets by Storm-control for a given interface.
1.3.6.1.4.1.7800.100.4.1.8NodeubiIfErps
1.3.6.1.4.1.7800.100.4.1.8.1TableubiIfErpsTablenot-accessiblecurrentThe table of ERPS information on interface.
1.3.6.1.4.1.7800.100.4.1.8.1.1RowubiIfErpsEntrynot-accessiblecurrentThe entry of ERPS information on interface.
1.3.6.1.4.1.7800.100.4.1.8.1.1.1ColumnubiIfErpsAggMinLinkread-writecurrentMinmum Link count to activate Port-channel in ERPS. - To activate Port-channel, actived members of port-channel must be minmum link count at least.
1.3.6.1.4.1.7800.100.4.2NodeubiInterfaceMIBConformance
1.3.6.1.4.1.7800.100.4.2.1NodeubiInterfaceMIBCompliances
1.3.6.1.4.1.7800.100.4.2.1.1ComplianceubiInterfaceMIBCompliancecurrentThe compliance statement for entities which implement the UBQS-INTERFACE-MIB
1.3.6.1.4.1.7800.100.4.2.2NodeubiInterfaceMIBGroups
1.3.6.1.4.1.7800.100.4.2.2.1GroupubiPortGroupcurrentA collection of objects containing information about physical port.
1.3.6.1.4.1.7800.100.4.2.2.2GroupubiIfStatsGroupcurrentA collection of objects containing packet statistics for a given port.
1.3.6.1.4.1.7800.100.4.2.2.3GroupubiSwitchportGroupcurrentA collection of objects containing the switchport information.
Type Definitions
NameSyntaxStatusDescription
PortGBICTypeListINTEGER { none(0), other(1), sfp(2), xfp(3), sfp-plus(4), qsfp-plus(5) }currentRepresents the type of slot.
PortTypeINTEGER { other(1), e100BaseUnknown(10), e10BaseT(11), e10BaseF(12), e100BaseTX(13), e100BaseT4(14), e100BaseF(15), e100BaseLX(16), e100BaseFsm(17), e10a100BaseTX(18), e100BaseBX10(19), e100BaseBX10D(20), e100BaseBX10U(21), e100BaseSX(22), e1000BaseUnknown(100), e1000BaseLX(101), e1000BaseSX(102), e1000BaseCX(103), e1000BaseLH(104), e1000BaseT(105), e10a100a1000BaseT(106), e1000BaseZX(107), e1000BaseBX(108), e1000BaseBX10D(109), e1000BaseBX10U(110), e1000BasePX(111), e1000BaseBT(112), e1000BaseSvc(113), e1000BasePXPon(114), e1000BasePX20(115), e1000BasePX30(116), e10GBaseUnknown(1000), e10GBaseCPX(1001), e10GBaseLX4(1002), e10GBaseEX4(1003), e10GBaseLR(1004), e10GBaseSX4(1005), e10GBaseER(1006), e10GBaseSR(1007), e10GBaseCX4(1008), e10GBaseSW(1009), e10GBaseLW(1010), e10GBaseEW(1011), e10GBaseSvc(1012), e10GBaseZR(1013), e100BaseEX(1014), e100BaseZX(1015), e10GBaseLRM(1016), e10GBaseT(1017), e10GBaseSfpPlus(1018), e10GBaseEPON(1019), e40GBaseUnknown(2000), e40GBaseCR4(2001), e40GBaseSR4(2002), e40GBaseLR4(2003), e40GXLPPI(2004) }currentRepresents the port type.
UbiFlowctrlWatermarkOCTET STRING (SIZE(7))currentrepresent flowcontrol watermark value : '3d 3d' first value = wmpause(0-255) second value = wmcancel(0-255)
UbiSwitchportTypeBITS { customerVlanPort(0), providerNetworkPort(1), customerNetworkPort(2), customerEdgePort(3), customerBackbonePort(4), virtualInstancePort(5), dBridgePort(6), access(7), trunk(8), hybrid(9) }currentA port type. The possible port types are: customerVlanPort(0) - Indicates a port is a C-tag aware port of an enterprise VLAN aware bridge. providerNetworkPort(1) - Indicates a port is an S-tag aware port of a Provider B…