UBQS-IP-MIB
68 objects
This MIB module defines IP information.
Imported Objects
| IF-MIB | InterfaceIndex |
| INET-ADDRESS-MIB | InetAddress InetAddressPrefixLength InetAddressType |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString PhysAddress RowStatus TEXTUAL-CONVENTION TimeStamp TruthValue |
| UBQS-SMI | ubiMgmtv2 |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.7800.100.14 | IdentityubiIpMIB | This MIB module defines IP information. | ||
| 1.3.6.1.4.1.7800.100.14.0 | NodeubiIpMIBNotificationPrefix | |||
| 1.3.6.1.4.1.7800.100.14.0.1 | NodeubiIpMIBNotifications | |||
| 1.3.6.1.4.1.7800.100.14.0.2 | NodeubiPingMIBNotifications | |||
| 1.3.6.1.4.1.7800.100.14.0.2.1 | NotificationubiPingSendCompletion | current | This notification is sent at the completion of the sequence of pings. | |
| 1.3.6.1.4.1.7800.100.14.1 | NodeubiIpMIBObjects | |||
| 1.3.6.1.4.1.7800.100.14.1.1 | TableubiIpAddrTable | not-accessible | current | The table of addressing information relevant to this entity's IP addresses. |
| 1.3.6.1.4.1.7800.100.14.1.1.1 | RowubiIpAddrEntry | not-accessible | current | The addressing information for one of this entity's IP addresses. |
| 1.3.6.1.4.1.7800.100.14.1.1.1.1 | ColumnubiIpAddrType | read-only | current | The IP address type. ipv4(1) An IPv4 address as defined by the InetAddressIPv4 textual convention. ipv6(2) An IPv6 address as defined by the InetAddressIPv6 te… |
| 1.3.6.1.4.1.7800.100.14.1.1.1.2 | ColumnubiIpAddress | read-only | current | The IP address to which this entry's addressing information pertains. |
| 1.3.6.1.4.1.7800.100.14.1.1.1.3 | ColumnubiIpAddrPrefixLen | read-only | current | The prefix length associated with the IP address. |
| 1.3.6.1.4.1.7800.100.14.1.1.1.4 | ColumnubiIpAddrIfIndex | read-create | current | The index value which uniquely identifies the interface to which this entry is applicable. |
| 1.3.6.1.4.1.7800.100.14.1.1.1.5 | ColumnubiIpAddrStatus | read-create | current | Indicate whether this entry is primary or not. |
| 1.3.6.1.4.1.7800.100.14.1.1.1.6 | ColumnubiIpAddrRowstatus | read-create | current | This object is used to create a new row or delete an existing row in this table. |
| 1.3.6.1.4.1.7800.100.14.1.2 | TableubiInetRouteTable | not-accessible | current | The table of addressing information relevant to this entity's IP addresses. |
| 1.3.6.1.4.1.7800.100.14.1.2.1 | RowubiInetRouteEntry | not-accessible | current | The addressing information for one of this entity's IP addresses. |
| 1.3.6.1.4.1.7800.100.14.1.2.1.1 | ColumnubiInetRouteInstance | read-only | current | The instance identifier of the (conceptual) routing table containing this route. |
| 1.3.6.1.4.1.7800.100.14.1.2.1.2 | ColumnubiInetRouteDestType | read-only | current | The destination address type. ipv4(1) An IPv4 address as defined by the InetAddressIPv4 textual convention. ipv6(2) An IPv6 address as defined by the InetAddre… |
| 1.3.6.1.4.1.7800.100.14.1.2.1.3 | ColumnubiInetRouteDest | read-only | current | The destination IP address of this route. |
| 1.3.6.1.4.1.7800.100.14.1.2.1.4 | ColumnubiInetRouteDestPfxLen | read-only | current | |
| 1.3.6.1.4.1.7800.100.14.1.2.1.5 | ColumnubiInetRouteNextHopType | read-only | current | |
| 1.3.6.1.4.1.7800.100.14.1.2.1.6 | ColumnubiInetRouteNextHop | read-only | current | |
| 1.3.6.1.4.1.7800.100.14.1.2.1.7 | ColumnubiInetRouteIfIndex | read-only | current | |
| 1.3.6.1.4.1.7800.100.14.1.2.1.8 | ColumnubiInetRoutetype | read-only | current | |
| 1.3.6.1.4.1.7800.100.14.1.2.1.9 | ColumnubiInetRouteProto | read-only | current | |
| 1.3.6.1.4.1.7800.100.14.1.2.1.10 | ColumnubiInetRouteMetric1 | read-only | current | |
| 1.3.6.1.4.1.7800.100.14.1.2.1.11 | ColumnubiInetRouteMetric2 | read-only | current | |
| 1.3.6.1.4.1.7800.100.14.1.2.1.12 | ColumnubiInetRouteMetric3 | read-only | current | |
| 1.3.6.1.4.1.7800.100.14.1.2.1.13 | ColumnubiInetRouteMetric4 | read-only | current | |
| 1.3.6.1.4.1.7800.100.14.1.2.1.14 | ColumnubiInetRouteMetric5 | read-only | current | |
| 1.3.6.1.4.1.7800.100.14.1.2.1.15 | ColumnubiInetRouteStatus | read-only | current | |
| 1.3.6.1.4.1.7800.100.14.1.2.1.16 | ColumnubiInetRouteDistance | read-write | current | |
| 1.3.6.1.4.1.7800.100.14.1.2.1.17 | ColumnubiInetRouteTag | read-write | current | |
| 1.3.6.1.4.1.7800.100.14.1.2.1.18 | ColumnubiInetRouteNextHopName | read-write | current | |
| 1.3.6.1.4.1.7800.100.14.1.2.1.19 | ColumnubiInetRouteRowstatus | read-create | current | |
| 1.3.6.1.4.1.7800.100.14.1.3 | TableubiIpv6NeighborTable | not-accessible | current | The table of addressing information relevant to this entity's IPv6 addresses. |
| 1.3.6.1.4.1.7800.100.14.1.3.1 | RowubiIpv6NeighborEntry | not-accessible | current | The addressing information for one of this entity's IPv6 addresses. |
| 1.3.6.1.4.1.7800.100.14.1.3.1.1 | ColumnubiIpv6NeighborIfIndex | read-only | current | The inde value which uniquely identifies the interface to which this entry is applicable |
| 1.3.6.1.4.1.7800.100.14.1.3.1.2 | ColumnubiIpv6NeighborPhysAddress | read-create | current | The media-dependent `physical' address. This object should return 0 when this entry is in the 'incomplete' state. As the entries in this table are typically no… |
| 1.3.6.1.4.1.7800.100.14.1.3.1.3 | ColumnubiIpv6NeighborNetAddress | read-only | current | The Ipv6Address corresponding to the media-dependent `physical' address. This object predates the rule limiting index objects to a max access value of 'not-acc… |
| 1.3.6.1.4.1.7800.100.14.1.3.1.4 | ColumnubiIpv6NeighborType | read-only | current | The type of mapping. Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the ubiIpv6NeighborTable. That is, i… |
| 1.3.6.1.4.1.7800.100.14.1.3.1.5 | ColumnubiIpv6NeighborState | read-only | current | The Neighbor Unreachability Detection [3] state for the interface when the address mapping in this entry is used. If Neighbor Unreachability Detection is not i… |
| 1.3.6.1.4.1.7800.100.14.1.3.1.6 | ColumnubiIpv6NeighborLastUpdated | read-only | current | The value of sysUpTime at the time this entry was last updated. If this entry was updated prior to the last re- initialization of the local network management … |
| 1.3.6.1.4.1.7800.100.14.1.3.1.7 | ColumnubiIpv6NeighborRowstatus | read-create | current | The status of this conceptual row. As all objects in this conceptual row have default values, a row can be created and made active by setting this object appro… |
| 1.3.6.1.4.1.7800.100.14.2 | NodeubiPingMIBObjects | |||
| 1.3.6.1.4.1.7800.100.14.2.1 | NodeubiPingGlobal | |||
| 1.3.6.1.4.1.7800.100.14.2.2 | NodeubiPingSend | |||
| 1.3.6.1.4.1.7800.100.14.2.2.1 | ScalarubiPingSendProto | read-write | current | The protocol to use. |
| 1.3.6.1.4.1.7800.100.14.2.2.2 | ScalarubiPingSendTarget | read-write | current | The address of the device to be pinged. |
| 1.3.6.1.4.1.7800.100.14.2.2.3 | ScalarubiPingSendRepeat | read-write | current | Specifies the number of ping packets to send to the target. |
| 1.3.6.1.4.1.7800.100.14.2.2.4 | ScalarubiPingSendPacketSize | read-write | current | Specifies the size of ping packets to send to the target. |
| 1.3.6.1.4.1.7800.100.14.2.2.5 | ScalarubiPingSendTimeout | read-write | current | Specifies the amount of time to wait for a response. |
| 1.3.6.1.4.1.7800.100.14.2.2.6 | ScalarubiPingSendInterval | read-write | current | Specifies the amount of time to wait before sending the next packet. |
| 1.3.6.1.4.1.7800.100.14.2.2.7 | ScalarubiPingSendSrcAddr | read-write | current | Specifies the sender IP address for sending packets. |
| 1.3.6.1.4.1.7800.100.14.2.2.8 | ScalarubiPingSendTTL | read-write | current | Specifies the TTL. |
| 1.3.6.1.4.1.7800.100.14.2.2.9 | ScalarubiPingSendTos | read-write | current | Specifies the Type Of Service. |
| 1.3.6.1.4.1.7800.100.14.2.2.10 | ScalarubiPingSendDF | read-write | current | Specifies the DF bit in IP header. dont(2) means a packet cannot be fragmented. |
| 1.3.6.1.4.1.7800.100.14.2.2.15 | ScalarubiPingSendExecute | read-write | current | Send the ping packets when value is set to send(1). |
| 1.3.6.1.4.1.7800.100.14.2.3 | NodeubiPingResults | |||
| 1.3.6.1.4.1.7800.100.14.2.3.1 | ScalarubiPingSendCompleted | accessible-for-notify | current | Set to true when all the packets in this sequence have been either responded to or timed out. |
| 1.3.6.1.4.1.7800.100.14.2.3.2 | ScalarubiPingSendPackets | accessible-for-notify | current | The total number of the sending ping. |
| 1.3.6.1.4.1.7800.100.14.2.3.3 | ScalarubiPingReceivedPackets | accessible-for-notify | current | The total number of the received ping. |
| 1.3.6.1.4.1.7800.100.14.3 | NodeubiIpMIBConformance | |||
| 1.3.6.1.4.1.7800.100.14.3.1 | NodeubiIpMIBCompliances | |||
| 1.3.6.1.4.1.7800.100.14.3.1.2 | ComplianceubiIpMIBCompliance | current | The compliance statement for entities which implement the UBQS-IP-MIB | |
| 1.3.6.1.4.1.7800.100.14.3.2 | NodeubiIpMIBGroups | |||
| 1.3.6.1.4.1.7800.100.14.3.2.1 | GroupubiIpAddrGroup | current | A collection of objects containing information about the address information of system. | |
| 1.3.6.1.4.1.7800.100.14.3.2.2 | GroupubiPingGroup | current | A collection of objects containing information about the ping. |