UBQS-MPLS-LDP-MIB
20 objects
No module-level DESCRIPTION found.
Imported Objects
| IF-MIB | InterfaceIndex |
| INET-ADDRESS-MIB | InetAddress InetAddressPrefixLength InetAddressType |
| MPLS-TC-STD-MIB | MplsLSPID MplsOwner mplsStdMIB MplsTunnelIndex MplsTunnelInstanceIndex TeHopAddressType |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString IpAddress RowStatus TEXTUAL-CONVENTION TimeStamp TruthValue |
| UBQS-SMI | ubiMplsGroupMIB |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.7800.100.24.3 | IdentityubiLdpMIB | |||
| 1.3.6.1.4.1.7800.100.24.3.0 | NodeubiLdpMIBNotificationPrefix | |||
| 1.3.6.1.4.1.7800.100.24.3.1 | NodeubiLdpMIBObjects | |||
| 1.3.6.1.4.1.7800.100.24.3.1.1 | NodeubiLdpConfig | |||
| 1.3.6.1.4.1.7800.100.24.3.1.1.1 | ScalarubiLdpEnable | read-write | current | Set the global attribute of LDP whether the LDP performs the operations. If this attribute is not set, then the LDP does not send any kinds of packets. |
| 1.3.6.1.4.1.7800.100.24.3.1.1.2 | ScalarubiLdpRouterId | read-write | current | This entry set the router-id to the supplied IP address. The router uses this address to generate the LDP-ID. If you does not set this feild and the ubiLdpEnab… |
| 1.3.6.1.4.1.7800.100.24.3.1.1.3 | ScalarubiLdpFailoverCfmEnable | read-write | current | set the attribute of Connectivity Fault Management(CFM) in LDP. If you set this field, LDP creates the socket (AF_CFM) to detect whether the link associated wi… |
| 1.3.6.1.4.1.7800.100.24.3.1.1.4 | ScalarubiLdpTargetedPeerHelloReceiptEnable | read-write | current | Enable whether LDP accepts the packets from the targeted peer and cerate the instance for peer. If you want to configure the targeted-peer in network, then MUS… |
| 1.3.6.1.4.1.7800.100.24.3.1.1.5 | ScalarubiLdpAcUpSignalEnable | read-write | current | Enable the field to notify the interface of binded vpls to the neighbors for VPLS. If this is reset, then does not quickly send the signal to neighbors. |
| 1.3.6.1.4.1.7800.100.24.3.1.1.6 | ScalarubiLdpExceedInitSessionNotiEnable | read-write | current | |
| 1.3.6.1.4.1.7800.100.24.3.1.1.7 | ScalarubiLdpPathVectorLimitMismatchNotiEnable | read-write | current | |
| 1.3.6.1.4.1.7800.100.24.3.1.1.8 | ScalarubiLdpLdpSessionUpDownNotiEnable | read-write | current | |
| 1.3.6.1.4.1.7800.100.24.3.1.2 | TableubiLdpInterfaceTable | not-accessible | current | This table specifies the LDP information for each interface. |
| 1.3.6.1.4.1.7800.100.24.3.1.2.1 | RowubiLdpInterfaceEntry | not-accessible | current | A row in this table represents an LDP enable/disable status for each interface. |
| 1.3.6.1.4.1.7800.100.24.3.1.2.1.1 | ColumnubiLdpIfEnable | read-write | current | If this object is set to ipv4, ipv6, or both, then it is possible to transmit Hello packet through a specified interface. And LDP adjacencies and session can b… |
| 1.3.6.1.4.1.7800.100.24.3.2 | NodeubiLdpMIBConformance | |||
| 1.3.6.1.4.1.7800.100.24.3.2.1 | NodeubiLdpMIBCompliances | |||
| 1.3.6.1.4.1.7800.100.24.3.2.1.1 | ComplianceubiLdpMIBCompliance | current | The compliance statement for entities which implement the UBQS-MPLS-LDP-MIB | |
| 1.3.6.1.4.1.7800.100.24.3.2.2 | NodeubiLdpMIBGroups | |||
| 1.3.6.1.4.1.7800.100.24.3.2.2.1 | GroupubiLdpMIBGroup | current | A collection of objects containing information about the LDP information. |