UBQS-REDUNDANCY-MIB
65 objects
The UBQS-REDUNDANCY-MIB is used to monitor and configure the redundancy appliances.
Imported Objects
| IF-MIB | InterfaceIndex InterfaceIndexOrZero |
| INET-ADDRESS-MIB | InetAddress InetAddressPrefixLength InetAddressType |
| SNMPv2-SMI | MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | DisplayString PhysAddress TEXTUAL-CONVENTION TimeStamp TruthValue |
| UBQS-SMI | ubiMgmtv2 |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.7800.100.29 | IdentityubiRedundancyMIB | The UBQS-REDUNDANCY-MIB is used to monitor and configure the redundancy appliances. | ||
| 1.3.6.1.4.1.7800.100.29.0 | NodeubiRedundancyMIBNotificationPrefix | |||
| 1.3.6.1.4.1.7800.100.29.0.1 | NotificationubiSwitchOverNotification | current | The agent generates this trap when a switchover occurs. | |
| 1.3.6.1.4.1.7800.100.29.0.2 | NotificationubiRedundancyConnectionStateNotification | current | The agent generates this trap when the connection state of standby appliance device is changed. | |
| 1.3.6.1.4.1.7800.100.29.0.3 | NotificationubiRedundancySyncNotification | current | The agent generates this trap when the synchronization process with standby SCU is done. This notification occurs after standby is connected. | |
| 1.3.6.1.4.1.7800.100.29.0.4 | NotificationubiRedundancySyncStateChangeNotification | current | The agent generates this trap when the synchronization state has been changed. | |
| 1.3.6.1.4.1.7800.100.29.1 | NodeubiRedundancyObjects | |||
| 1.3.6.1.4.1.7800.100.29.1.1 | NodeubiRedundancy | |||
| 1.3.6.1.4.1.7800.100.29.1.1.1 | ScalarubiRedundancyReload | read-write | current | Reload Active/Standby or Peer device. |
| 1.3.6.1.4.1.7800.100.29.1.1.2 | ScalarubiRedundancyMyRedundancyState | read-only | current | The HA redundancy state of this appliance device. |
| 1.3.6.1.4.1.7800.100.29.1.1.3 | TableubiRedundancyTable | not-accessible | current | This table keeps the current configuration of the redundancy information of the active and standby units. |
| 1.3.6.1.4.1.7800.100.29.1.1.3.1 | RowubiRedundancyEntry | not-accessible | current | An entry containing redundancy information of the active and standby units |
| 1.3.6.1.4.1.7800.100.29.1.1.3.1.1 | ColumnubiRedundancyIsActivePreferred | not-accessible | current | This status indicates whether this appliance device is preferred to active or not. Commonly upper(or left) device has this value as True(1) and low(or right) d… |
| 1.3.6.1.4.1.7800.100.29.1.1.3.1.2 | ColumnubiRedundancyState | read-only | current | The HA redundancy state of the appliance device. Role states for redundancy. Valid values are : notConfigured (1) The appliance is not configured for redundanc… |
| 1.3.6.1.4.1.7800.100.29.1.1.3.1.3 | ColumnubiRedundancyConnectionState | accessible-for-notify | current | The HA redundancy connection state of standby appliance device. |
| 1.3.6.1.4.1.7800.100.29.1.1.4 | ScalarubiRedundancyConnStateNotificationEnabled | read-write | current | Enable or disable redundancy connection state notification via SNMP. |
| 1.3.6.1.4.1.7800.100.29.1.1.5 | TableubiRedundancySyncTable | not-accessible | current | This table keeps the information of the redundancy sync state of the active and standby units. |
| 1.3.6.1.4.1.7800.100.29.1.1.5.1 | RowubiRedundancySyncEntry | not-accessible | current | An entry containing redundancy sync information of the active and standby units |
| 1.3.6.1.4.1.7800.100.29.1.1.5.1.1 | ColumnubiRedundancySyncState | accessible-for-notify | current | The redundancy sync state of active appliance device for standby. This sync state is related with 'redundancy-check' function. ACTIVE periodically checks sync … |
| 1.3.6.1.4.1.7800.100.29.1.1.5.1.2 | ColumnubiRedundancySyncNotificationEnabled | read-write | current | Enable or disable redundancy sync notification via SNMP. |
| 1.3.6.1.4.1.7800.100.29.1.1.5.1.3 | ColumnubiRedundancySyncStateChangeNotificationEnabled | read-write | current | Enable or disable redundancy sync state change notification via SNMP. |
| 1.3.6.1.4.1.7800.100.29.1.2 | TableubiRedundancyAddrTable | not-accessible | current | This table keeps the current configuration of the address information of the active and standby appliances. There is an entry in this table corresponding to ea… |
| 1.3.6.1.4.1.7800.100.29.1.2.1 | RowubiRedundancyAddrEntry | not-accessible | current | An entry containing address information for redundancy configuration on a network interface. |
| 1.3.6.1.4.1.7800.100.29.1.2.1.1 | ColumnubiRedundancyAddrIfIndex | read-only | current | The index value which uniquely identifies the interface to which this entry is applicable. |
| 1.3.6.1.4.1.7800.100.29.1.2.1.2 | ColumnubiRedundancyAddrMyAddressType | read-only | current | The type of address stored in ubiMyAddressType. |
| 1.3.6.1.4.1.7800.100.29.1.2.1.3 | ColumnubiRedundancyAddrMyAddress | read-only | current | The IP address of the interface configured for this HA configuration in this appliance. The type of this mib variable is defined in ubiMyAddressType. |
| 1.3.6.1.4.1.7800.100.29.1.2.1.4 | ColumnubiRedundancyAddrPeerAddressType | read-only | current | The type of address stored in ubiPeerAddressType |
| 1.3.6.1.4.1.7800.100.29.1.2.1.5 | ColumnubiRedundancyAddrPeerAddress | read-only | current | The IP address of the interface configured for this HA configuration in the peer appliance. The type of this mib variable is defined in ubiPeerAddressType. |
| 1.3.6.1.4.1.7800.100.29.2 | NodeubiRedundancyPeerObjects | |||
| 1.3.6.1.4.1.7800.100.29.2.1 | NodeubiPeerSysInfo | |||
| 1.3.6.1.4.1.7800.100.29.2.1.1 | ScalarubiPeerSWVersion | read-only | current | Software version of the peer HA system |
| 1.3.6.1.4.1.7800.100.29.2.1.2 | ScalarubiPeerSerialNumber | read-only | current | Serial Number of the peer HA system |
| 1.3.6.1.4.1.7800.100.29.2.1.3 | ScalarubiPeerPhysicalAddress | read-only | current | Peer's physical address. |
| 1.3.6.1.4.1.7800.100.29.2.2 | NodeubiPeerResource | |||
| 1.3.6.1.4.1.7800.100.29.2.2.1 | ScalarubiPeerCpuFiveSec | not-accessible | current | CPU busy percentage in the last 5 second period. |
| 1.3.6.1.4.1.7800.100.29.2.2.2 | ScalarubiPeerCpuOneMin | read-only | current | CPU busy percentage in the last 1 minute period. |
| 1.3.6.1.4.1.7800.100.29.2.2.3 | ScalarubiPeerCpuFiveMin | read-only | current | CPU busy percentage in the last 5 minute period. |
| 1.3.6.1.4.1.7800.100.29.2.2.4 | ScalarubiPeerMemoryAlloc | not-accessible | current | Memory allocation usage. |
| 1.3.6.1.4.1.7800.100.29.2.2.5 | ScalarubiPeerMemoryFree | read-only | current | Memory free usage. |
| 1.3.6.1.4.1.7800.100.29.2.2.6 | ScalarubiPeerMemoryTotal | read-only | current | CPU busy percentage in the last 5 minute period. |
| 1.3.6.1.4.1.7800.100.29.2.2.7 | ScalarubiPeerMemoryFreePercentage | read-only | current | It indicates available memory allocation space in percentage. |
| 1.3.6.1.4.1.7800.100.29.2.3 | NodeubiPeerEnvironment | |||
| 1.3.6.1.4.1.7800.100.29.2.3.1 | ScalarubiPeerTemperature | read-only | current | peer's current temperature. |
| 1.3.6.1.4.1.7800.100.29.2.4 | NodeubiPeerBootInfo | |||
| 1.3.6.1.4.1.7800.100.29.2.4.1 | ScalarubiPeerNextBootImage | read-write | current | Booting OS Image's name for peer unit when setting this object, It should be specified the file name with path under /flash directory and Peer's next booting m… |
| 1.3.6.1.4.1.7800.100.29.2.4.2 | NodeubiPeerImageModify | |||
| 1.3.6.1.4.1.7800.100.29.2.4.2.1 | ScalarubiPeerImagePath | read-write | current | warning : It operates for only Active unit, not Standby Unit. Path of the file that you want to copy or erase. Represents 'copy (os1:|os2:) peer <FILENAME>' or… |
| 1.3.6.1.4.1.7800.100.29.2.4.2.2 | ScalarubiPeerImageFileName | read-write | current | warning : It operates for only Active unit, not Standby Unit. Name of the file that you want to copy or erase. for copy operation, file name at Active unit and… |
| 1.3.6.1.4.1.7800.100.29.2.4.2.3 | ScalarubiPeerImageModifyOperate | write-only | current | execute to copy or erase configurations. |
| 1.3.6.1.4.1.7800.100.29.3 | NodeubiSwitchoverObjects | |||
| 1.3.6.1.4.1.7800.100.29.3.1 | NodeubiSwitchover | |||
| 1.3.6.1.4.1.7800.100.29.3.1.1 | ScalarubiLastSwitchOverReason | read-only | current | Reason for the most recent switchover. Valid values are : nont (0) none of the following lossConnWithActive (1) lost connection with active forcedSwitchOver (2… |
| 1.3.6.1.4.1.7800.100.29.3.1.2 | ScalarubiLastSwitchOverTime | read-only | current | The local date and time when the last switchover event occurred and was logged to the system. |
| 1.3.6.1.4.1.7800.100.29.3.1.3 | ScalarubiSwitchoverNotificationEnabled | read-write | current | Enable or disable switchover notification via SNMP. |
| 1.3.6.1.4.1.7800.100.29.3.1.4 | ScalarubiSwitchOverRedundancySyncState | read-only | current | The HA redundancy sync state of the appliance device after switchover. Valid values are : sync (1) SCU synchronization is done . notSync (2) SCU synchronizatio… |
| 1.3.6.1.4.1.7800.100.29.4 | NodeubiRedundancyMIBConformance | |||
| 1.3.6.1.4.1.7800.100.29.4.1 | NodeubiRedundancyMIBCompliance | |||
| 1.3.6.1.4.1.7800.100.29.4.1.1 | ComplianceubiRedundancyMIBCompliances | current | An Redundancy-MIB implementation can implement this group to provide Redundancy properties. | |
| 1.3.6.1.4.1.7800.100.29.4.2 | NodeubiRedundancyMIBGroups | |||
| 1.3.6.1.4.1.7800.100.29.4.2.1 | GroupubiRedundancyMIBRedundancyGroup | current | The collection of objects which are used to get the operational state and redundancy state of the modules | |
| 1.3.6.1.4.1.7800.100.29.4.2.2 | GroupubiRedundancyMIBSwitchoverGroup | current | The collection of objects which are used to get the operational state and redundancy state of the modules | |
| 1.3.6.1.4.1.7800.100.29.4.2.3 | GroupubiRedundancyMIBNotificationGroup | current | The collection of objects which are used to send a notification. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| FlashPath | INTEGER { os1(0), os2(1), config(2) } | current | Represents 'copy <source> peer'. |
| RedundancyState | INTEGER { notConfigured(1), active (2), standby (3), activeLostStandby(4) } | current | Role states for redundancy. Valid values are : notConfigured (1) The appliance is not configured for redundancy. active (2) The appliance is the active appliance. standby (3) The appliance is warm standby mode activeLos… |
| SwitchOverReason | INTEGER { none(0), lossConnWithActive (1), forcedSwitchOver (2), unknown (3) } | current | Role states for redundancy. Valid values are : none (0) none of the following lossConnWithActive (1) lost connection with active forcedSwitchOver (2) Switchover occurs by force unknown (3) Switchover occurs by unknown r… |