UBQS-SLD-MIB
28 objects
The UBQS-SLD-MIB is used for getting the information about self loop detect(SLD).
Imported Objects
| IF-MIB | ifAdminStatus ifIndex ifName ifOperStatus ifType |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Gauge32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString RowStatus TEXTUAL-CONVENTION TimeStamp TruthValue |
| UBQS-SMI | ubiMgmtv2 |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.7800.100.25 | IdentityubiSldMIB | The UBQS-SLD-MIB is used for getting the information about self loop detect(SLD). | ||
| 1.3.6.1.4.1.7800.100.25.0 | NodeubiSldMIBNotificationPrefix | |||
| 1.3.6.1.4.1.7800.100.25.0.1 | NotificationubiSelfLoopDetectStateChange | current | When SLD status is changed, this notification is occured. | |
| 1.3.6.1.4.1.7800.100.25.1 | NodeubiSldMIBObjects | |||
| 1.3.6.1.4.1.7800.100.25.1.1 | NodeubiSldGlobal | |||
| 1.3.6.1.4.1.7800.100.25.1.1.1 | ScalarubiSldEnabled | read-write | current | It is enable function of SLD. |
| 1.3.6.1.4.1.7800.100.25.1.1.2 | ScalarubiSldHelloInterval | read-write | current | Global SLD hello interval. |
| 1.3.6.1.4.1.7800.100.25.1.1.3 | ScalarubiSldRecoveryTime | read-write | current | Global SLD Recovery time. |
| 1.3.6.1.4.1.7800.100.25.1.1.4 | ScalarubiSldNotifyOnlyEnbaled | read-write | current | It is enable Global function of only notification without SLD. |
| 1.3.6.1.4.1.7800.100.25.1.1.5 | ScalarubiSldPortCheckEnabled | read-write | current | It is enable global configuration of SLD without checking port. |
| 1.3.6.1.4.1.7800.100.25.1.1.6 | ScalarubiSldIfStateChangeEnabled | read-write | current | It is enable to sending SLD SNMP trap message |
| 1.3.6.1.4.1.7800.100.25.1.2 | TableubiSldIfTable | not-accessible | current | |
| 1.3.6.1.4.1.7800.100.25.1.2.1 | RowubiSldIfEntry | not-accessible | current | |
| 1.3.6.1.4.1.7800.100.25.1.2.1.1 | ColumnubiSldIfEnabled | read-write | current | It is enable to transmit SLD hello PDU in interface. |
| 1.3.6.1.4.1.7800.100.25.1.2.1.2 | ColumnubiSldIfHelloInterval | read-write | current | It is changed SLD hello interval. |
| 1.3.6.1.4.1.7800.100.25.1.2.1.3 | ColumnubiSldIfRecoveryTime | read-write | current | When it is configured, if interface is disabled by SLD, interface automatically recover after recovery time. |
| 1.3.6.1.4.1.7800.100.25.1.2.1.4 | ColumnubiSldIfNotifyOnlyEnabled | read-write | current | When it is configured, if self-loop is detected, only notification is occured without disable interface. |
| 1.3.6.1.4.1.7800.100.25.1.2.1.5 | ColumnubiSldIfPortCheckEnabled | read-write | current | When it is enabled, if it receive SLD hello PDU of anothor interface, it regards SLD. |
| 1.3.6.1.4.1.7800.100.25.1.2.1.6 | ColumnubiSldIfState | read-only | current | Current interface status enable(1) : interface is active errDisable(2) : interface is disable by SLD. |
| 1.3.6.1.4.1.7800.100.25.1.2.1.7 | ColumnubiSldIfRecoveryMethod | read-only | current | Last Recorvery status none(1) : none autoRecovery(2) : Auto recovery manualRecovery(3): Manual recoery |
| 1.3.6.1.4.1.7800.100.25.1.2.1.8 | ColumnubiSldIfLastStateChangeTime | read-only | current | Last time of changing interface status by SLD. |
| 1.3.6.1.4.1.7800.100.25.1.2.1.9 | ColumnubiSldIfErrorDisabledCount | read-only | current | The number of occurence self-loop detection. |
| 1.3.6.1.4.1.7800.100.25.1.2.1.10 | ColumnubiSldIfStateReset | read-write | current | It manually clear interface status by SLD. none(0) : Do nothing reset(1) : Clear interface. |
| 1.3.6.1.4.1.7800.100.25.2 | NodeubiSldMIBConformance | |||
| 1.3.6.1.4.1.7800.100.25.2.1 | NodeubiSldMIBCompliances | |||
| 1.3.6.1.4.1.7800.100.25.2.1.1 | ComplianceubiSldMIBCompliance | current | The compliance statement for entities which implement the UBQS-SLD-MIB | |
| 1.3.6.1.4.1.7800.100.25.2.2 | NodeubiSldMIBGroups | |||
| 1.3.6.1.4.1.7800.100.25.2.2.1 | GroupubiSldGroup | current | A collection of objects containing information about self loop detect. |