UMC1000-MIB
344 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2067.1.1.2.1 | Nodeumc1System | |||
| 1.3.6.1.4.1.2067.1.1.2.1.1 | Scalarumc1SystemDateTime | read-write | mandatory | The system date and time is accessible as follows: octet[0] Timezone (0 through 24) octet[1] High-order 8-bits (MSB) of Year octet[2] Low-order 8-bits (LSB) of… |
| 1.3.6.1.4.1.2067.1.1.2.1.2 | Nodeumc1SystemSysProv | |||
| 1.3.6.1.4.1.2067.1.1.2.1.2.1 | Tableumc1SystemSysProvBerTable | not-accessible | mandatory | This table stores BER provisioning information per Plug-In Type. Access to this Table is read-write. By implementation, this table supports GET, SET, and GET-N… |
| 1.3.6.1.4.1.2067.1.1.2.1.2.1.1 | Rowumc1SystemSysProvBerEntry | not-accessible | mandatory | An entry in the System Global Provisioning table. The relationship and allowed ranges of values for the Maintenance and Red BER columns is as follows: _PitAnyE… |
| 1.3.6.1.4.1.2067.1.1.2.1.2.1.1.1 | Columnumc1SystemSysProvBerPit | read-write | mandatory | See description of the 'PlugInType'. However, currently, entries for the following PITs are supported in this table: _PitAnyE1_ _PitAnyFO_ _PitAnyT1_ _PitAnyRF… |
| 1.3.6.1.4.1.2067.1.1.2.1.2.1.1.2 | Columnumc1SystemSysProvBerRedThresh | read-write | mandatory | This is the RED BER threshold exponent. If the value is 5, then the maintenance BER threshold is 10e-05 (10^-5), or 1 in one thousand. The range of this thresh… |
| 1.3.6.1.4.1.2067.1.1.2.1.2.1.1.3 | Columnumc1SystemSysProvBerMaintThresh | read-write | mandatory | This is the maintenance BER threshold exponent. If the value is 6, then the maintenance BER threshold is 10e-06 (10^-6), or 1 in one million. The range of this… |
| 1.3.6.1.4.1.2067.1.1.2.1.2.1.1.4 | Columnumc1SystemSysProvBerMarginData | read-write | mandatory | This is the facility margin data in dB. Valid values range from zero (0) through fifteen (15), inclusive. The default value is 6. |
| 1.3.6.1.4.1.2067.1.1.2.1.2.2 | Scalarumc1SystemSysProvSystemCcsThresh | read-write | mandatory | The range of allowable values is zero (0) through thirty-seven (37) in steps of one (1). |
| 1.3.6.1.4.1.2067.1.1.2.1.2.3 | Scalarumc1SystemSysProvPsuRingVoltage | read-write | mandatory | This number indicates the number of Volts; the following voltage levels are supported: Integer Value Meaning 60 60 Volts 65 65 Volts 85 85 Volts 95 95 Volts |
| 1.3.6.1.4.1.2067.1.1.2.1.2.4 | Scalarumc1SystemSysProvPsuPulseMeterTone | read-write | mandatory | This value indicates the frequency of the pulse tone. The following frequencies are supported, with zero (0) disabling pulse metering: Integer Value Meaning 12… |
| 1.3.6.1.4.1.2067.1.1.2.1.2.5 | Scalarumc1SystemSysProvPsuRingFreq | read-write | mandatory | This value is equal to the Ring Frequency Hertz multiplied by ten (10); the following values are supported: Integer Value Meaning 167 16.7 Hz 177 17.7 Hz 187 1… |
| 1.3.6.1.4.1.2067.1.1.2.1.2.6 | Tableumc1SystemSysProvChgTable | not-accessible | mandatory | The EMS uses this table to synchronize its internal representation of System Global Provisioning information with that managed by the UMC Agent. A trap is sent… |
| 1.3.6.1.4.1.2067.1.1.2.1.2.6.1 | Rowumc1SystemSysProvChgEntry | not-accessible | mandatory | An entry in the System Global Provisioning Changes table. |
| 1.3.6.1.4.1.2067.1.1.2.1.2.6.1.1 | Columnumc1SystemSysProvChgSeqNbr | read-only | mandatory | This objects value matches the value of umc1SystemSysProvTableChangeSeqNum at the time the row was created. A valid value of this object is in the range of 1 t… |
| 1.3.6.1.4.1.2067.1.1.2.1.2.6.1.2 | Columnumc1SystemSysProvChgData | read-only | mandatory | The first octet, octet 0, indicates which System Global object has changed. This value will be one of the following: 0x00 - System Date & Time 0x01 - ACO Confi… |
| 1.3.6.1.4.1.2067.1.1.2.1.2.7 | Scalarumc1SystemSysProvTableChangeSeqNum | read-only | mandatory | A sequence number used to indicate that the Global System Provisioning Table, umc1SystemSysProvTable, has been modified and it needs to be re-read. Whenever th… |
| 1.3.6.1.4.1.2067.1.1.2.1.2.8 | Scalarumc1SystemSysProvACOConfig | read-write | mandatory | This object defines the configuration of the system-wide alarm cut-off (ACO) button. It could be UMC_Mode, Standard_Mode, or Extended_Mode ACO operation. In th… |
| 1.3.6.1.4.1.2067.1.1.2.1.2.9 | Scalarumc1SystemSysTimingSource | read-write | mandatory | This object is used to access or modify the timing source used by the UMC system. OPEN ISSUE: We will add the description once we ascertain the format of the C… |
| 1.3.6.1.4.1.2067.1.1.2.1.2.10 | Scalarumc1SystemSysTemperature | read-write | mandatory | This object is used to access get the current temperature of the terminal that houses the IPMI Agent. OPEN ISSUE: We will change the description once we ascert… |
| 1.3.6.1.4.1.2067.1.1.2.1.2.11 | Tableumc1SystemSysProvCATable | not-accessible | mandatory | The EMS uses this table to access and update the channel attributes associated with ADSL port in the system or the channel attributes of transceiver plugin car… |
| 1.3.6.1.4.1.2067.1.1.2.1.2.11.1 | Rowumc1SystemSysProvCAEntry | not-accessible | mandatory | An entry in the System Global Channel Attribute table. |
| 1.3.6.1.4.1.2067.1.1.2.1.2.11.1.1 | Columnumc1SystemSysProvCAIndex | read-only | mandatory | This object contains the information that identifies the ADSL port associated with the DMT carrier mask being defined or the terminal, shelf, slot and channel(… |
| 1.3.6.1.4.1.2067.1.1.2.1.2.11.1.2 | Columnumc1SystemSysProvCAData | read-write | mandatory | This object contains the DMT carrier mask associated with an ADSL port or the channel attributes of a Transceiver card. octet[1] 'version' of data (1 for this … |
| 1.3.6.1.4.1.2067.1.1.2.1.3 | Nodeumc1SystemPitProv | |||
| 1.3.6.1.4.1.2067.1.1.2.1.3.1 | Tableumc1SystemPitProvTable | not-accessible | mandatory | A Management Station uses this table to GET and SET a *single* Plug-in Provisioning record. Access to this table is read-write. By implementation, this table s… |
| 1.3.6.1.4.1.2067.1.1.2.1.3.1.1 | Rowumc1SystemPitProvEntry | not-accessible | mandatory | An entry in the Plug-In Provisioning. |
| 1.3.6.1.4.1.2067.1.1.2.1.3.1.1.1 | Columnumc1SystemPitProvTerminalId | read-write | mandatory | See description for 'TerminalIdType'. |
| 1.3.6.1.4.1.2067.1.1.2.1.3.1.1.2 | Columnumc1SystemPitProvShelfId | read-write | mandatory | See description for 'ShelfIdType'. |
| 1.3.6.1.4.1.2067.1.1.2.1.3.1.1.3 | Columnumc1SystemPitProvSlotId | read-write | mandatory | See description for 'SlotIdType'. |
| 1.3.6.1.4.1.2067.1.1.2.1.3.1.1.4 | Columnumc1SystemPitProvPit | read-write | mandatory | See description for 'PlugInType'. |
| 1.3.6.1.4.1.2067.1.1.2.1.3.1.1.5 | Columnumc1SystemPitProvData | read-write | mandatory | The structure of this object is the same for Get Response PDUs and Set Request PDUs. In a SET Request the data is included in the Request PDU. In a GET Request… |
| 1.3.6.1.4.1.2067.1.1.2.1.3.2 | Tableumc1SystemDefPitProvTable | not-accessible | mandatory | A Management Station uses this table to read a *single* Default Plug-in Provisioning record. Access to this table is read-only. By implementation, this table s… |
| 1.3.6.1.4.1.2067.1.1.2.1.3.2.1 | Rowumc1SystemDefPitProvEntry | not-accessible | mandatory | An entry in the Default Plug-In Provisioning Table. |
| 1.3.6.1.4.1.2067.1.1.2.1.3.2.1.1 | Columnumc1SystemDefPitProvTerminalId | read-only | mandatory | See description for 'TerminalIdType'. |
| 1.3.6.1.4.1.2067.1.1.2.1.3.2.1.2 | Columnumc1SystemDefPitProvShelfId | read-only | mandatory | See description for 'ShelfIdType'. |
| 1.3.6.1.4.1.2067.1.1.2.1.3.2.1.3 | Columnumc1SystemDefPitProvSlotId | read-only | mandatory | See description for 'SlotIdType'. |
| 1.3.6.1.4.1.2067.1.1.2.1.3.2.1.4 | Columnumc1SystemDefPitProvPit | read-only | mandatory | See description for 'PlugInType'. |
| 1.3.6.1.4.1.2067.1.1.2.1.3.2.1.5 | Columnumc1SystemDefPitProvData | read-only | mandatory | In a SNMP GET or GET-NEXT operation the data is returned in the Response PDU. The byte-format structure of this object, taking into account the above descripti… |
| 1.3.6.1.4.1.2067.1.1.2.1.3.3 | Tableumc1SystemPitProvChgTable | not-accessible | mandatory | The EMS uses this table to synchronize its internal representation of the Plug-In Provisioning data with that managed by the UMC Agent. A trap is issued to the… |
| 1.3.6.1.4.1.2067.1.1.2.1.3.3.1 | Rowumc1SystemPitProvChgEntry | not-accessible | mandatory | An entry in the Plug-In Provisioning Change table. |
| 1.3.6.1.4.1.2067.1.1.2.1.3.3.1.1 | Columnumc1SystemPitProvChgSeqNbr | read-only | mandatory | This object's value matches the value of umc1SystemPitProvTableChangeSeqNum at the time the row was created. A valid value of this object is in the range of 1 … |
| 1.3.6.1.4.1.2067.1.1.2.1.3.3.1.2 | Columnumc1SystemPitProvChgData | read-only | mandatory | This object records the location of the Plug-in, type of the Plug-In, nature of the change (add/modify/delete) and, possibly, the database record associated wi… |
| 1.3.6.1.4.1.2067.1.1.2.1.3.4 | Scalarumc1SystemPitProvTableChangeSeqNum | read-only | mandatory | A sequence number used to indicate that the PlugIn Provisioning Table, umc1SystemPitProvTable, has been modified and it needs to be re-read. Whenever the SNMP … |
| 1.3.6.1.4.1.2067.1.1.2.1.3.5 | Scalarumc1FacAlmStringTableChangeSeqNum | read-only | mandatory | A sequence number used to indicate that facility alarm description string table has been modified and it needs to be re-read. Whenever the SNMP agent is restar… |
| 1.3.6.1.4.1.2067.1.1.2.1.3.6 | Tableumc1FacAlmStringTable | not-accessible | mandatory | This table contains facility alarm description strings for a given plugin in a UMC system. SNMP GET-NEXT operation is not allowed. |
| 1.3.6.1.4.1.2067.1.1.2.1.3.6.1 | Rowumc1FacAlmStringEntry | not-accessible | mandatory | An entry in the facility alarm description strings table. |
| 1.3.6.1.4.1.2067.1.1.2.1.3.6.1.1 | Columnumc1FacAlmStringTerminalId | read-write | mandatory | Identifier of a terminal. |
| 1.3.6.1.4.1.2067.1.1.2.1.3.6.1.2 | Columnumc1FacAlmStringShelfId | read-write | mandatory | Identifier of a shelf. |
| 1.3.6.1.4.1.2067.1.1.2.1.3.6.1.3 | Columnumc1FacAlmStringSlotId | read-write | mandatory | Identifier of a slot. |
| 1.3.6.1.4.1.2067.1.1.2.1.3.6.1.4 | Columnumc1FacAlmStringFacilityId | read-write | mandatory | Identifier of a port on a card. The range of the value depends on the plugin-type of the card. If the card does not have a port use 0xFF. |
| 1.3.6.1.4.1.2067.1.1.2.1.3.6.1.5 | Columnumc1FacAlmStringPluginType | read-write | mandatory | This object identifies the plug-in type (PIT) of a card in the UMC system. |
| 1.3.6.1.4.1.2067.1.1.2.1.3.6.1.6 | Columnumc1FacAlmStringData | read-write | mandatory | This object contains the facility alarm string description. In order to delete an alarm string the user *MUST* perform a SET operation with a string containing… |
| 1.3.6.1.4.1.2067.1.1.2.1.3.7 | Tableumc1FacAlmStringChgTable | not-accessible | mandatory | The EMS uses this table to synchronize its internal representation of the facility alarm description strings with that managed by the UMC Agent. A trap is issu… |
| 1.3.6.1.4.1.2067.1.1.2.1.3.7.1 | Rowumc1FacAlmStringChgEntry | not-accessible | mandatory | An entry in the facility alarm description string table change history table. |
| 1.3.6.1.4.1.2067.1.1.2.1.3.7.1.1 | Columnumc1FacAlmStringChgSeqNum | read-only | mandatory | This object's value matches the value of umc1FacAlmStringTableChangeSeqNum at the time the row was created. A valid value of this object is in the range of 1 t… |
| 1.3.6.1.4.1.2067.1.1.2.1.3.7.1.2 | Columnumc1FacAlmStringChgData | read-only | mandatory | This object records the changes to umc1FacAlmStringTable. In the initial implementation the first octet, octet[0] will store the version number of the octet re… |
| 1.3.6.1.4.1.2067.1.1.2.1.3.8 | Scalarumc1TL1IfProvTableChangeSeqNum | read-only | mandatory | A sequence number used to indicate that TL1 interface provisioning table has been modified and it needs to be re-read. Whenever the SNMP agent is restarted, th… |
| 1.3.6.1.4.1.2067.1.1.2.1.3.9 | Tableumc1TL1IfProvTable | not-accessible | mandatory | This table contains TL1 interface provisioning for a given OSI card in a UMC system. SNMP GET-NEXT operation is not allowed. |
| 1.3.6.1.4.1.2067.1.1.2.1.3.9.1 | Rowumc1TL1IfProvEntry | not-accessible | mandatory | An entry in the TL1 interface provisioning table. |
| 1.3.6.1.4.1.2067.1.1.2.1.3.9.1.1 | Columnumc1TL1IfProvTerminalId | read-write | mandatory | Identifier of a terminal. |
| 1.3.6.1.4.1.2067.1.1.2.1.3.9.1.2 | Columnumc1TL1IfProvShelfId | read-write | mandatory | Identifier of a shelf. |
| 1.3.6.1.4.1.2067.1.1.2.1.3.9.1.3 | Columnumc1TL1IfProvSlotId | read-write | mandatory | Identifier of a slot. |
| 1.3.6.1.4.1.2067.1.1.2.1.3.9.1.4 | Columnumc1TL1IfProvInterfaceId | read-write | mandatory | Identifier of a TL1 interface on the OSI card. The range of the value is between 1 (one) and 6 (six). |
| 1.3.6.1.4.1.2067.1.1.2.1.3.9.1.5 | Columnumc1TL1IfProvPluginType | read-write | mandatory | This object identifies the plug-in type (PIT) of a card in the UMC system. |
| 1.3.6.1.4.1.2067.1.1.2.1.3.9.1.6 | Columnumc1TL1IfProvData | read-write | mandatory | This object contains the TL1 interface provisioning database. In the current UMC Release the maximum length of a TL1 interface provisioning database is 15 octe… |
| 1.3.6.1.4.1.2067.1.1.2.1.3.10 | Tableumc1TL1IfProvChgTable | not-accessible | mandatory | The EMS uses this table to synchronize its internal representation of the TL1 interface provisioning with that managed by the UMC Agent. A trap is issued to th… |
| 1.3.6.1.4.1.2067.1.1.2.1.3.10.1 | Rowumc1TL1IfProvChgEntry | not-accessible | mandatory | An entry in the TL1 interface provisioning table change history table. |
| 1.3.6.1.4.1.2067.1.1.2.1.3.10.1.1 | Columnumc1TL1IfProvChgSeqNum | read-only | mandatory | This object's value matches the value of umc1TL1IfProvTableChangeSeqNum at the time the row was created. A valid value of this object is in the range of 1 thro… |
| 1.3.6.1.4.1.2067.1.1.2.1.3.10.1.2 | Columnumc1TL1IfProvChgData | read-only | mandatory | This object records the changes to umc1TL1IfProvTable. In the initial implementation the first octet, octet[0] will store the version number of the octet repre… |
| 1.3.6.1.4.1.2067.1.1.2.1.4 | Scalarumc1CpuSoftwareFeatures | read-only | mandatory | This object lists the features built into the UMC system. The list information required by the IPMI and EMS to determine the type of features the UMC system su… |
| 1.3.6.1.4.1.2067.1.1.2.1.5 | Scalarumc1SystemRelearnTrapSeqNum | read-only | mandatory | A sequence number used to indicate the number of times the ACO operation has been performed since the agent last restarted. Whenever the SNMP agent is restarte… |
| 1.3.6.1.4.1.2067.1.1.2.1.6 | Scalarumc1RestrictedAccess | read-write | mandatory | A change in the value of certain MIB objects could be service affecting. Henceforth, such objects are called restricted objects. The object umc1RestrictedAcces… |
| 1.3.6.1.4.1.2067.1.1.2.1.7 | Nodeumc1Service | |||
| 1.3.6.1.4.1.2067.1.1.2.1.7.1 | Nodeumc1GR303Grp | |||
| 1.3.6.1.4.1.2067.1.1.2.1.7.1.1 | Scalarumc1GR303TableChangeSeqNum | read-only | mandatory | A sequence number used to indicate that the GR-303 group provisioning Table, umc1GR303Table, has been modified and it needs to be re-read. Whenever the SNMP ag… |
| 1.3.6.1.4.1.2067.1.1.2.1.7.1.2 | Tableumc1GR303Table | not-accessible | mandatory | A Management Station uses this table to read, modify, create or delete a GR-303 Group in the UMC system. The MIB Table has two columns one for the Index and on… |
| 1.3.6.1.4.1.2067.1.1.2.1.7.1.2.1 | Rowumc1GR303Entry | not-accessible | mandatory | An entry in the GR-303 Group Provisioning Table. |
| 1.3.6.1.4.1.2067.1.1.2.1.7.1.2.1.1 | Columnumc1Gr303Index | read-write | mandatory | It contains the Terminal and GR-303 Group number that identifies the record in the UMC system. For the initial implementation the OCTET representation will be … |
| 1.3.6.1.4.1.2067.1.1.2.1.7.1.2.1.2 | Columnumc1Gr303Data | read-write | mandatory | The GR-303 Group Provisioning record. For the initial implementation the OCTET representation will be as follows : octet[0] Version number of the octet represe… |
| 1.3.6.1.4.1.2067.1.1.2.1.7.2 | Tableumc1GR303ChgTable | not-accessible | mandatory | The EMS uses this table to synchronize its internal representation of the GR-303 Group Provisioning data with that managed by the UMC Agent. A trap is issued t… |
| 1.3.6.1.4.1.2067.1.1.2.1.7.2.1 | Rowumc1GR303ChgEntry | not-accessible | mandatory | An entry in the GR-303 Group Provisioning Table Change history table. |
| 1.3.6.1.4.1.2067.1.1.2.1.7.2.1.1 | Columnumc1GR303ChgSeqNum | read-only | mandatory | This objects value matches the value of umc1GR303TableChangeSeqNum at the time the row was created. A valid value of this object is in the range of 1 through u… |
| 1.3.6.1.4.1.2067.1.1.2.1.7.2.1.2 | Columnumc1GR303ChgData | read-only | mandatory | This object records the changes to the GR-303 Group Provisioning table. For the initial implementation the OCTET representation will be as follows: octet[0] Ve… |
| 1.3.6.1.4.1.2067.1.1.2.1.7.3 | Nodeumc1TR8Grp | |||
| 1.3.6.1.4.1.2067.1.1.2.1.7.3.1 | Scalarumc1TR8TableChangeSeqNum | read-only | mandatory | A sequence number used to indicate that the TR-8 group provisioning Table, umc1TR8Table, has been modified and it needs to be re-read. Whenever the SNMP agent … |
| 1.3.6.1.4.1.2067.1.1.2.1.7.3.2 | Tableumc1TR8Table | not-accessible | mandatory | A Management Station uses this table to read, modify, create or delete a TR-8 Group in the UMC system. The MIB Table has two columns one for the Index and one … |
| 1.3.6.1.4.1.2067.1.1.2.1.7.3.2.1 | Rowumc1TR8Entry | not-accessible | mandatory | An entry in the TR-8 Group Provisioning Table. |
| 1.3.6.1.4.1.2067.1.1.2.1.7.3.2.1.1 | Columnumc1TR8Index | read-write | mandatory | It contains the Terminal and TR-8 Group number that identifies the record in the UMC system. For the initial implementation the OCTET representation will be as… |
| 1.3.6.1.4.1.2067.1.1.2.1.7.3.2.1.2 | Columnumc1TR8Data | read-write | mandatory | The TR-8 Group Provisioning record. For the initial implementation the OCTET representation will be as follows: octet[0] Version number of the octet representa… |
| 1.3.6.1.4.1.2067.1.1.2.1.7.4 | Tableumc1TR8ChgTable | not-accessible | mandatory | The EMS uses this table to synchronize its internal representation of the TR-8 Group Provisioning data with that managed by the UMC Agent. A trap is issued to … |
| 1.3.6.1.4.1.2067.1.1.2.1.7.4.1 | Rowumc1TR8ChgEntry | not-accessible | mandatory | An entry in the TR-8 Group Provisioning Table Change history table. |
| 1.3.6.1.4.1.2067.1.1.2.1.7.4.1.1 | Columnumc1TR8ChgSeqNum | read-only | mandatory | This objects value matches the value of umc1TR8TableChangeSeqNum at the time the row was created. A valid value of this object is in the range of 1 through umc… |
| 1.3.6.1.4.1.2067.1.1.2.1.7.4.1.2 | Columnumc1TR8ChgData | read-only | mandatory | This object records the changes to the TR-08 Group Provisioning table. For the initial implementation the OCTET representation will be as follows: octet[0] Ver… |
| 1.3.6.1.4.1.2067.1.1.2.1.7.5 | Nodeumc1V5Grp | |||
| 1.3.6.1.4.1.2067.1.1.2.1.7.5.1 | Scalarumc1V5TableChangeSeqNum | read-only | mandatory | A sequence number used to indicate that the V5 provisioning Table, umc1V5Table, has been modified and it needs to be re-read. Whenever the SNMP agent is restar… |
| 1.3.6.1.4.1.2067.1.1.2.1.7.5.2 | Tableumc1V5Table | not-accessible | mandatory | A Management Station uses this table to read, modify, create or delete V5.1 or V5.2 groups, variant records and C-Channel records (V5.2 only) in the UMC system… |
| 1.3.6.1.4.1.2067.1.1.2.1.7.5.2.1 | Rowumc1V5Entry | not-accessible | mandatory | An entry in the V5 Provisioning Table. |
| 1.3.6.1.4.1.2067.1.1.2.1.7.5.2.1.1 | Columnumc1V5Index | read-write | mandatory | It contains the indices that identify a V5 record in the UMC system. The format of the indices depends on the type of the record that will be accessed. There a… |
| 1.3.6.1.4.1.2067.1.1.2.1.7.5.2.1.2 | Columnumc1V5Data | read-write | mandatory | The V5 Provisioning record. For the initial implementation the OCTET representation will be as follows: octet[0] Version number of the octet representation bei… |
| 1.3.6.1.4.1.2067.1.1.2.1.7.6 | Tableumc1V5ChgTable | not-accessible | mandatory | The EMS uses this table to synchronize its internal representation of the V5 Provisioning data with that managed by the UMC Agent. A trap is issued to the EMS … |
| 1.3.6.1.4.1.2067.1.1.2.1.7.6.1 | Rowumc1V5ChgEntry | not-accessible | mandatory | An entry in the V5 Provisioning Table Change history table. |
| 1.3.6.1.4.1.2067.1.1.2.1.7.6.1.1 | Columnumc1V5ChgSeqNum | read-only | mandatory | This objects value matches the value of umc1V5TableChangeSeqNum at the time the row was created. A valid value of this object is in the range of 1 through umc1… |
| 1.3.6.1.4.1.2067.1.1.2.1.7.6.1.2 | Columnumc1V5ChgData | read-only | mandatory | This object records the changes to the V5 Provisioning table. In the initial implementation the first octet, octet[0] will store the version number of the octe… |
| 1.3.6.1.4.1.2067.1.1.2.1.8 | Nodeumc1XConnect | |||
| 1.3.6.1.4.1.2067.1.1.2.1.8.1 | Scalarumc1XCTableChangeSeqNum | read-only | mandatory | A sequence number used to indicate that the cross connect Table, umc1XCTable, has been modified and it needs to be re-read. Whenever the SNMP agent is restarte… |
| 1.3.6.1.4.1.2067.1.1.2.1.8.2 | Tableumc1XCTable | not-accessible | mandatory | A Management Station uses this table to read/update/delete a cross connect in the UMC system. Call Reference Numbers (CRNs) identify the end-points of a cross … |
| 1.3.6.1.4.1.2067.1.1.2.1.8.2.1 | Rowumc1XCEntry | not-accessible | mandatory | An entry in the cross connect Table. |
| 1.3.6.1.4.1.2067.1.1.2.1.8.2.1.1 | Columnumc1XCIndex | read-write | mandatory | It contains one end-point of a cross connect in the UMC system, i.e., the CRN IN number. For the initial implementation the OCTET representation will be as fol… |
| 1.3.6.1.4.1.2067.1.1.2.1.8.2.1.2 | Columnumc1XCData | read-write | mandatory | The cross connect record. For the initial implementation the OCTET representation will be as follows: octet[0] Version number of the octet representation being… |
| 1.3.6.1.4.1.2067.1.1.2.1.8.3 | Tableumc1XCChgTable | not-accessible | mandatory | The EMS uses this table to synchronize its internal representation of the cross connect data with that managed by the UMC Agent. A trap is issued to the EMS in… |
| 1.3.6.1.4.1.2067.1.1.2.1.8.3.1 | Rowumc1XCChgEntry | not-accessible | mandatory | An entry in the cross connect Table Change history table. |
| 1.3.6.1.4.1.2067.1.1.2.1.8.3.1.1 | Columnumc1XCChgSeqNum | read-only | mandatory | This objects value matches the value of umc1XCTableChangeSeqNum at the time the row was created. A valid value of this object is in the range of 1 through umc1… |
| 1.3.6.1.4.1.2067.1.1.2.1.8.3.1.2 | Columnumc1XCChgData | read-only | mandatory | This object records the changes made to the cross connect table. For the initial implementation the OCTET representation will be as follows : octet[0] Version … |
| 1.3.6.1.4.1.2067.1.1.2.1.9 | Scalarumc1SystemAllSeqNbr | read-only | mandatory | This object encapsulates all sequence numbers. The format of this object is: Octet[0] contains version, 0x01 for this release. Octet[1-4] contains snmpOutTraps… |
| 1.3.6.1.4.1.2067.1.1.2.1.10 | Scalarumc1AtmProtTableChangeSeqNum | read-only | mandatory | A sequence number used to indicate that the ATM Protection group provisioning Table, umc1AtmProtGrpTable, has been modified and it needs to be re-read. Wheneve… |
| 1.3.6.1.4.1.2067.1.1.2.1.11 | Tableumc1AtmProtGrpTable | not-accessible | mandatory | A Management Station uses this table to read, modify, create or delete a ATM Protection Group in the UMC system. The MIB Table has two columns one for the Inde… |
| 1.3.6.1.4.1.2067.1.1.2.1.11.1 | Rowumc1AtmProtGrpEntry | not-accessible | mandatory | An entry in the ATM Protection Group Provisioning Table. |
| 1.3.6.1.4.1.2067.1.1.2.1.11.1.1 | Columnumc1AtmProtGrpIndex | read-write | mandatory | It contains the Terminal and ATM Protection Group number that identifies the record in the UMC system. For the initial implementation the OCTET representation … |
| 1.3.6.1.4.1.2067.1.1.2.1.11.1.2 | Columnumc1AtmProtGrpData | read-write | mandatory | The ATM Protection Group Provisioning record. For the initial implementation the OCTET representation will be as follows : octet[0] Version number of the octet… |
| 1.3.6.1.4.1.2067.1.1.2.1.12 | Tableumc1AtmProtGrpChgTable | not-accessible | mandatory | The EMS uses this table to synchronize its internal representation of the ATM Protection Group Provisioning data with that managed by the UMC Agent. A trap is … |
| 1.3.6.1.4.1.2067.1.1.2.1.12.1 | Rowumc1AtmProtGrpChgEntry | not-accessible | mandatory | An entry in the ATM Protection Group Provisioning Table Change history table. |
| 1.3.6.1.4.1.2067.1.1.2.1.12.1.1 | Columnumc1AtmProtGrpChgSeqNum | read-only | mandatory | This objects value matches the value of umc1AtmProtTableChangeSeqNum at the time the row was created. A valid value of this object is in the range of 1 through… |
| 1.3.6.1.4.1.2067.1.1.2.1.12.1.2 | Columnumc1AtmProtGrpChgData | read-only | mandatory | This object records the changes to the ATM Protection Group Provisioning table. For the initial implementation the OCTET representation will be as follows : oc… |
| 1.3.6.1.4.1.2067.1.1.2.1.13 | Scalarumc1PortProfTableChangeSeqNum | read-only | mandatory | A sequence number used to indicate that the Port Profile provisioning Table, umc1PortProfTable, has been modified and it needs to be re-read. Whenever the SNMP… |
| 1.3.6.1.4.1.2067.1.1.2.1.14 | Tableumc1PortProfTable | not-accessible | mandatory | A Management Station uses this table to read, modify, create or delete a Port Profile in the UMC system. The MIB Table has two columns one for the Index and on… |
| 1.3.6.1.4.1.2067.1.1.2.1.14.1 | Rowumc1PortProfEntry | not-accessible | mandatory | An entry in the Port Profile Provisioning Table. |
| 1.3.6.1.4.1.2067.1.1.2.1.14.1.1 | Columnumc1PortProfIndex | read-write | mandatory | It contains the Plugin type the profile is for and Port Profile number that identifies the record in the UMC system. For the initial implementation the OCTET r… |
| 1.3.6.1.4.1.2067.1.1.2.1.14.1.2 | Columnumc1PortProfData | read-write | mandatory | The Port Profile provisioning record. For the initial implementation the OCTET representation will be as follows : octet[0] Version number of the octet represe… |
| 1.3.6.1.4.1.2067.1.1.2.1.15 | Tableumc1PortProfChgTable | not-accessible | mandatory | The EMS uses this table to synchronize its internal representation of the Port Profile Provisioning data with that managed by the UMC Agent. A trap is issued t… |
| 1.3.6.1.4.1.2067.1.1.2.1.15.1 | Rowumc1PortProfChgEntry | not-accessible | mandatory | An entry in the Port Profile Provisioning Table Change history table. |
| 1.3.6.1.4.1.2067.1.1.2.1.15.1.1 | Columnumc1PortProfChgSeqNum | read-only | mandatory | This objects value matches the value of umc1PortProfTableChangeSeqNum at the time the row was created. A valid value of this object is in the range of 1 throug… |
| 1.3.6.1.4.1.2067.1.1.2.1.15.1.2 | Columnumc1PortProfChgData | read-only | mandatory | This object records the changes to the Port Profile Provisioning table. For the initial implementation the OCTET representation will be as follows : octet[0] V… |
| 1.3.6.1.4.1.2067.1.1.2.1.16 | Scalarumc1MyAgentSoftwareFeatures | read-only | mandatory | This object lists the features built into this load of IPMI software. Octet[0] represents the version of the packed format of features described below. For thi… |
| 1.3.6.1.4.1.2067.1.1.2.1.17 | Nodeumc1Security | |||
| 1.3.6.1.4.1.2067.1.1.2.1.17.1 | Scalarumc1SecurityDataTableChangeSeqNum | read-only | mandatory | A sequence number used to indicate that the User Security Data Table, umc1SecurityDataTable, has been modified and it needs to be re-read. Whenever the SNMP ag… |
| 1.3.6.1.4.1.2067.1.1.2.1.17.2 | Tableumc1SecurityDataTable | not-accessible | mandatory | A Management Station uses this table to read, modify, create or delete an User Security Data in the UMC system. The MIB Table has two columns one for the Index… |
| 1.3.6.1.4.1.2067.1.1.2.1.17.2.1 | Rowumc1SecurityDataEntry | not-accessible | mandatory | An entry in the User Security Data Table. |
| 1.3.6.1.4.1.2067.1.1.2.1.17.2.1.1 | Columnumc1SecurityDataTableIndex | read-write | mandatory | It contains the User Number that identifies the record in the UMC system. For the initial implementation the OCTET representation will be as follows: octet[0] … |
| 1.3.6.1.4.1.2067.1.1.2.1.17.2.1.2 | Columnumc1SecurityDataTableData | read-write | mandatory | The User security Data record. For the initial implementation the OCTET representation will be as follows: octet[0] Version number of the octet representation … |
| 1.3.6.1.4.1.2067.1.1.2.1.17.3 | Tableumc1SecurityDataChgTable | not-accessible | mandatory | The EMS uses this table to synchronize its internal representation of the User Security data with that managed by the UMC Agent. A trap is issued to the EMS in… |
| 1.3.6.1.4.1.2067.1.1.2.1.17.3.1 | Rowumc1SecurityDataChgEntry | not-accessible | mandatory | An entry in the User Security Data Table Change history table. |
| 1.3.6.1.4.1.2067.1.1.2.1.17.3.1.1 | Columnumc1SecurityDataChgSeqNum | read-only | mandatory | This object's value matches the value of umc1SecurityTableTableChangeSeqNum at the time the row was created. A valid value of this object is in the range of 1 … |
| 1.3.6.1.4.1.2067.1.1.2.1.17.3.1.2 | Columnumc1SecurityDataChgData | read-only | mandatory | This object records the changes to the User Security Data table. For the initial implementation the OCTET representation will be as follows: octet[0] Version n… |
| 1.3.6.1.4.1.2067.1.1.2.1.18 | Nodeumc1SystemGenericDbProv | |||
| 1.3.6.1.4.1.2067.1.1.2.1.18.1 | Scalarumc1SystemGenericDbProvTableSeqNum | read-only | mandatory | A sequence number used to indicate that the Generic Database Table, umc1SystemGenericDbProvTable, has been modified and it needs to be re-read. Whenever the SN… |
| 1.3.6.1.4.1.2067.1.1.2.1.18.2 | Tableumc1SystemGenericDbProvTable | not-accessible | mandatory | A Management Station uses this table to GET or SET a *single* UMC database Provisioning record. Access to this table is read-write. By implementation, this tab… |
| 1.3.6.1.4.1.2067.1.1.2.1.18.2.1 | Rowumc1SystemGenericDbProvEntry | not-accessible | mandatory | An entry in the System Database. |
| 1.3.6.1.4.1.2067.1.1.2.1.18.2.1.1 | Columnumc1SystemGenericDbProvIndex | read-write | mandatory | This is the table INDEX. It is actually an octet encoded key representing the database record to be managed and how it is to be treated. It contains the Databa… |
| 1.3.6.1.4.1.2067.1.1.2.1.18.2.1.2 | Columnumc1SystemGenericDbProvData | read-write | mandatory | The structure of this object is the same for Get Response PDUs and Set Request PDUs. In a SET Request the data is included in the Request PDU. In a GET Request… |
| 1.3.6.1.4.1.2067.1.1.2.1.18.3 | Tableumc1SystemGenericDbProvChgTable | not-accessible | mandatory | The EMS uses this table to synchronize its internal representation of the Generic Database management data with that managed by the UMC Agent. A trap is issued… |
| 1.3.6.1.4.1.2067.1.1.2.1.18.3.1 | Rowumc1SystemGenericDbProvChgEntry | not-accessible | mandatory | An entry in the Generic Database Change table. |
| 1.3.6.1.4.1.2067.1.1.2.1.18.3.1.1 | Columnumc1SystemGenericDbProvChgTableSeqNum | read-only | mandatory | This object's value matches the value of umc1SystemGenericDbProvTableSeqNum at the time the row was created. A valid value of this object is in the range of 1 … |
| 1.3.6.1.4.1.2067.1.1.2.1.18.3.1.2 | Columnumc1SystemGenericDbProvChgData | read-only | mandatory | This object records the list of modified Database record(s) managed by umc1SystemGenericDbProvTable, nature of the change (add/modify/delete) and, possibly, th… |
| 1.3.6.1.4.1.2067.1.1.2.1.19 | Scalarumc1MibVersion | read-only | mandatory | This object gives Version of MIB supported by this load of IPMI software. Octet[0] represents the version of the packed format of MIB Version described below. … |
| 1.3.6.1.4.1.2067.1.1.2.1.20 | Scalarumc1DbRecordChangeTrapHandleMask | read-write | mandatory | This object describes how Db Record Change Trap for a given Db Record Type is being handle by IPMI. For the Db Record Type listed below, IPMI can send db Recor… |
| 1.3.6.1.4.1.2067.1.1.2.1.21 | Nodeumc1SystemAutonomousEvent | |||
| 1.3.6.1.4.1.2067.1.1.2.1.21.1 | Scalarumc1SystemAutonomousEventSeqNum | read-only | mandatory | A counter which gets incremented each time an Autonomous Event(Other than Alarm) occurs in the UMC System. Whenever the SNMP agent is restarted, this value wil… |
| 1.3.6.1.4.1.2067.1.1.2.1.21.2 | Tableumc1SystemAutonomousEventTable | not-accessible | mandatory | The EMS uses this table to synchronize its internal representation of the Autonomous Event data with that managed by the UMC Agent. A trap is issued to the EMS… |
| 1.3.6.1.4.1.2067.1.1.2.1.21.2.1 | Rowumc1SystemAutonomousEventTableEntry | not-accessible | mandatory | An entry in the Autonomous Event Table. |
| 1.3.6.1.4.1.2067.1.1.2.1.21.2.1.1 | Columnumc1SystemAutonomousEventTableSeqNum | read-only | mandatory | This object's value matches the value of umc1SystemAutonomousEventSeqNum at the time the row was created. A valid value of this object is in the range of 1 thr… |
| 1.3.6.1.4.1.2067.1.1.2.1.21.2.1.2 | Columnumc1SystemAutonomousEventTableData | read-only | mandatory | This object represents detailed Autonomous Event Information. The format of the object is as follows: octet [0] Version number of the octet representation. The… |
| 1.3.6.1.4.1.2067.1.1.2.2 | Nodeumc1Inventory | |||
| 1.3.6.1.4.1.2067.1.1.2.2.1 | Nodeumc1InventoryShelf | |||
| 1.3.6.1.4.1.2067.1.1.2.2.1.1 | Scalarumc1InventoryShelfTableChangeSeqNum | read-only | mandatory | A sequence number used to indicate that inventory shelf table has been modified and it needs to be re- read. Whenever the SNMP agent restarted, this value will… |
| 1.3.6.1.4.1.2067.1.1.2.2.1.2 | Tableumc1InventoryShelfTable | not-accessible | mandatory | This table contains information about all shelves in a UMC system. There will be an entry in this table for every reachable shelf in the system. |
| 1.3.6.1.4.1.2067.1.1.2.2.1.2.1 | Rowumc1InventoryShelfEntry | not-accessible | mandatory | An entry in the shelf table. |
| 1.3.6.1.4.1.2067.1.1.2.2.1.2.1.1 | Columnumc1InventoryShelfTerminalId | read-only | mandatory | Identifier of a terminal. |
| 1.3.6.1.4.1.2067.1.1.2.2.1.2.1.2 | Columnumc1InventoryShelfShelfId | read-only | mandatory | Identifier of a shelf. |
| 1.3.6.1.4.1.2067.1.1.2.2.1.2.1.3 | Columnumc1InventoryShelfType | read-only | mandatory | This object describes the type of the shelf. The following table lists the valid values and the corresponding shelf type they denote. Value Shelf Type 0 Old sh… |
| 1.3.6.1.4.1.2067.1.1.2.2.1.3 | Tableumc1InventoryShelfTableChangeHistoryTable | not-accessible | mandatory | This table records the location and type of the shelves whose addition to the UMC system caused the agent to emit umc1TrapInventoryShelfTableChange trap. The c… |
| 1.3.6.1.4.1.2067.1.1.2.2.1.3.1 | Rowumc1InventoryShelfTableChangeHistoryEntry | not-accessible | mandatory | An entry in the history table. |
| 1.3.6.1.4.1.2067.1.1.2.2.1.3.1.1 | Columnumc1InventoryShelfTableChangeHistoryIndex | read-only | mandatory | This objects value matches the value of umc1InventoryShelfTableChangeSeqNum at the time the row was created. A valid value of this object is in the range of 1 … |
| 1.3.6.1.4.1.2067.1.1.2.2.1.3.1.2 | Columnumc1InventoryShelfTableChangeHistoryData | read-only | mandatory | This object stores information of all shelves that were added to the UMC system when umc1TrapInventoryShelfTableChange trap was emitted by the agent with umc1I… |
| 1.3.6.1.4.1.2067.1.1.2.2.2 | Nodeumc1InventoryShelfExtended | |||
| 1.3.6.1.4.1.2067.1.1.2.2.2.1 | Tableumc1InventoryShelfExtendedTable | not-accessible | mandatory | This table contains extended information that can be read from a shelf about all shelves in a UMC system. There will be an entry in this table for every reacha… |
| 1.3.6.1.4.1.2067.1.1.2.2.2.1.1 | Rowumc1InventoryShelfExtendedEntry | not-accessible | mandatory | An entry in the extended shelf table. |
| 1.3.6.1.4.1.2067.1.1.2.2.2.1.1.1 | Columnumc1InventoryShelfExtendedTerminalId | read-only | mandatory | Identifier of a terminal. |
| 1.3.6.1.4.1.2067.1.1.2.2.2.1.1.2 | Columnumc1InventoryShelfExtendedShelfId | read-only | mandatory | Identifier of a shelf. |
| 1.3.6.1.4.1.2067.1.1.2.2.2.1.1.3 | Columnumc1InventoryShelfExtendedVersion | read-only | mandatory | The first octet contains the hardware version of the BOOT PROM of the shelf. The second octet contains the hardware revision of the BOOT PROM of the shelf. For… |
| 1.3.6.1.4.1.2067.1.1.2.2.2.1.1.4 | Columnumc1InventoryShelfExtendedAssemblyNumber | read-only | mandatory | This is the assembly number of the shelf. The string is not terminated by a NULL character. For a shelf with an older version of the hardware the values of the… |
| 1.3.6.1.4.1.2067.1.1.2.2.2.1.1.5 | Columnumc1InventoryShelfExtendedSerialNumber | read-only | mandatory | This is the serial number of the shelf. The string is not terminated by a NULL character. For a shelf with an older version of the hardware the values of the o… |
| 1.3.6.1.4.1.2067.1.1.2.2.2.1.1.6 | Columnumc1InventoryShelfExtendedCLEICode | read-only | mandatory | This is the CLEI code assigned to the shelf. The string is not terminated by a NULL character. |
| 1.3.6.1.4.1.2067.1.1.2.2.3 | Nodeumc1InventoryPlugin | |||
| 1.3.6.1.4.1.2067.1.1.2.2.3.1 | Scalarumc1InventoryPluginTableChangeSeqNum | read-only | mandatory | A sequence number used to indicate that inventory plug-in table has been modified and it needs to be re-read. Whenever the SNMP agent restarted, this value wil… |
| 1.3.6.1.4.1.2067.1.1.2.2.3.2 | Tableumc1InventoryPluginTable | not-accessible | mandatory | This table contains information about all plug-in cards in a UMC system. |
| 1.3.6.1.4.1.2067.1.1.2.2.3.2.1 | Rowumc1InventoryPluginEntry | not-accessible | mandatory | An entry in the plug-in table. |
| 1.3.6.1.4.1.2067.1.1.2.2.3.2.1.1 | Columnumc1InventoryPluginTerminalId | read-only | mandatory | Identifier of a terminal. |
| 1.3.6.1.4.1.2067.1.1.2.2.3.2.1.2 | Columnumc1InventoryPluginShelfId | read-only | mandatory | Identifier of a shelf. |
| 1.3.6.1.4.1.2067.1.1.2.2.3.2.1.3 | Columnumc1InventoryPluginSlotId | read-only | mandatory | Identifier of a slot. |
| 1.3.6.1.4.1.2067.1.1.2.2.3.2.1.4 | Columnumc1InventoryPluginType | read-only | mandatory | This object identifies the plug-in type (PIT) of a card in the UMC system. |
| 1.3.6.1.4.1.2067.1.1.2.2.3.3 | Tableumc1InventoryPluginTableChangeHistoryTable | not-accessible | mandatory | This table records the location and type of the plug- in cards whose addition to the UMC system caused the agent to emit umc1TrapInventoryPluginTableChange tra… |
| 1.3.6.1.4.1.2067.1.1.2.2.3.3.1 | Rowumc1InventoryPluginTableChangeHistoryEntry | not-accessible | mandatory | An entry in the history table. |
| 1.3.6.1.4.1.2067.1.1.2.2.3.3.1.1 | Columnumc1InventoryPluginTableChangeHistoryIndex | read-only | mandatory | This objects value matches the value of umc1InventoryPluginTableChangeSeqNum at the time the row was created. A valid value of this object is in the range of 1… |
| 1.3.6.1.4.1.2067.1.1.2.2.3.3.1.2 | Columnumc1InventoryPluginTableChangeHistoryData | read-only | mandatory | This object stores the location and plug-in type of all cards that were added to the UMC system when umc1TrapInventoryPluginTableChange trap was emitted by the… |
| 1.3.6.1.4.1.2067.1.1.2.2.4 | Nodeumc1InventoryPluginExtended | |||
| 1.3.6.1.4.1.2067.1.1.2.2.4.1 | Tableumc1InventoryPluginExtendedTable | not-accessible | mandatory | This table contains information about all plug-in cards in a UMC system. |
| 1.3.6.1.4.1.2067.1.1.2.2.4.1.1 | Rowumc1InventoryPluginExtendedEntry | not-accessible | mandatory | An entry in the plug-in table. |
| 1.3.6.1.4.1.2067.1.1.2.2.4.1.1.1 | Columnumc1InventoryPluginExtendedTerminalId | read-only | mandatory | Identifier of a terminal. |
| 1.3.6.1.4.1.2067.1.1.2.2.4.1.1.2 | Columnumc1InventoryPluginExtendedShelfId | read-only | mandatory | Identifier of a shelf. |
| 1.3.6.1.4.1.2067.1.1.2.2.4.1.1.3 | Columnumc1InventoryPluginExtendedSlotId | read-only | mandatory | Identifier of a slot. |
| 1.3.6.1.4.1.2067.1.1.2.2.4.1.1.4 | Columnumc1InventoryPluginExtendedStatus | read-only | mandatory | This object identifies the current state of a plug-in card. The following table lists the valid values and the corresponding plug-in status. Value Plug-in Stat… |
| 1.3.6.1.4.1.2067.1.1.2.2.4.1.1.5 | Columnumc1InventoryPluginExtendedVersion | read-only | mandatory | This object contains the information regarding hardware and software versions of a plug-in card. If the value of octet[0] is not 0 then data in octet[9] throug… |
| 1.3.6.1.4.1.2067.1.1.2.2.4.1.1.6 | Columnumc1InventoryPluginExtendedAssemblyNumber | read-only | mandatory | This is the assembly number of the plug-in card. This string is not terminated by a null character. |
| 1.3.6.1.4.1.2067.1.1.2.2.4.1.1.7 | Columnumc1InventoryPluginExtendedSerialNumber | read-only | mandatory | This is the serial number of the plug-in card. This string is not terminated by a null character. |
| 1.3.6.1.4.1.2067.1.1.2.2.4.1.1.8 | Columnumc1InventoryPluginExtendedCLEICode | read-only | mandatory | This is the CLEI code assigned to the plug-in card. This string is not terminated by a null character. |
| 1.3.6.1.4.1.2067.1.1.2.3 | Nodeumc1Terminal | |||
| 1.3.6.1.4.1.2067.1.1.2.3.1 | Scalarumc1TerminalStatusChangeSeqNum | read-only | mandatory | A sequence number used to indicate that the terminal status table needs to be read again. Whenever the SNMP agent is restarted, this value will be reset to 0 (… |
| 1.3.6.1.4.1.2067.1.1.2.3.2 | Tableumc1TerminalStatusTable | not-accessible | mandatory | This table contains the status that is associated with each terminal. There will be an entry in this table for every terminal known to the UMC, regardless of w… |
| 1.3.6.1.4.1.2067.1.1.2.3.2.1 | Rowumc1TerminalStatusEntry | not-accessible | mandatory | An entry in the terminal table. The data is indexed by the terminal whose data is represented. |
| 1.3.6.1.4.1.2067.1.1.2.3.2.1.1 | Columnumc1TerminalStatusTerminalId | read-only | mandatory | The ID number of the terminal that this row references. The LET is 1, RST1 is 2, RST2 is 3, etc. |
| 1.3.6.1.4.1.2067.1.1.2.3.2.1.2 | Columnumc1TerminalStatusValue | read-only | mandatory | The status of this terminal, based on the status of the most severe current alarm. The status of normal means that there are no current alarms present for this… |
| 1.3.6.1.4.1.2067.1.1.2.3.3 | Scalarumc1TerminalInfoChangeSeqNum | read-only | mandatory | A sequence number used to indicate that the terminal information table needs to be read again. Whenever the SNMP agent is restarted, this value will be reset t… |
| 1.3.6.1.4.1.2067.1.1.2.3.4 | Tableumc1TerminalInfoTable | not-accessible | mandatory | This table contains the provisioning data that is associated with each terminal. This table has an row for every terminal database entry, regardless of whether… |
| 1.3.6.1.4.1.2067.1.1.2.3.4.1 | Rowumc1TerminalInfoEntry | not-accessible | mandatory | An entry in the terminal provisioning table. The data is indexed by the terminal whose data is represented. |
| 1.3.6.1.4.1.2067.1.1.2.3.4.1.1 | Columnumc1TerminalInfoTerminalId | read-only | mandatory | The ID number of the terminal that this row references. |
| 1.3.6.1.4.1.2067.1.1.2.3.4.1.2 | Columnumc1TerminalInfoName | read-write | mandatory | The name of the terminal. If this is the LET, then it also ends up being the initial name of the UMC as a whole. This is not a null-terminated string. |
| 1.3.6.1.4.1.2067.1.1.2.3.4.1.3 | Columnumc1TerminalInfoSerialDeviceType | read-write | mandatory | Specifies the type of device that is connected to the serial port of the terminal. |
| 1.3.6.1.4.1.2067.1.1.2.3.4.1.4 | Columnumc1TerminalInfoBaudRate | read-write | mandatory | Specifies the current baud rate of the serial port of the terminal. |
| 1.3.6.1.4.1.2067.1.1.2.3.4.1.5 | Columnumc1TerminalInfoNewTerminalId | read-write | mandatory | The new identifier of the terminal referenced by this row. The terminal shall be rebooted after a successful write. The response to a SET request will refer to… |
| 1.3.6.1.4.1.2067.1.1.2.4 | Nodeumc1ACOSnapTopology | |||
| 1.3.6.1.4.1.2067.1.1.2.4.1 | Scalarumc1ACOSnapTopologySeqNum | read-only | mandatory | The value of umc1TopologyChangeSeqNum at the time that the snapshot was taken. This allows the management station to know if the links specified in the umc1Top… |
| 1.3.6.1.4.1.2067.1.1.2.4.2 | Tableumc1ACOSnapTopologyLinkTable | not-accessible | mandatory | The link table. This table will be empty if only one terminal makes up this UMC. Only active links will be in this table. If a link is lost, then the correspon… |
| 1.3.6.1.4.1.2067.1.1.2.4.2.1 | Rowumc1ACOSnapTopologyLinkEntry | not-accessible | mandatory | An entry in the link table. |
| 1.3.6.1.4.1.2067.1.1.2.4.2.1.1 | Columnumc1ACOSnapTopologyLinkTerminalA | read-only | mandatory | The Terminal ID of the terminal at one end of the link. This ID will always be lower in value than that specified for Terminal B. The order of the terminal IDs… |
| 1.3.6.1.4.1.2067.1.1.2.4.2.1.2 | Columnumc1ACOSnapTopologyLinkTerminalB | read-only | mandatory | The Terminal ID of the terminal that connects to Terminal A. |
| 1.3.6.1.4.1.2067.1.1.2.5 | Nodeumc1CommandResponse | |||
| 1.3.6.1.4.1.2067.1.1.2.5.1 | Tableumc1CommandTable | not-accessible | mandatory | A Management application may use the umc1CommandTable to execute a command in an agent. In order to execute a command with an argument, possibly null, the mana… |
| 1.3.6.1.4.1.2067.1.1.2.5.1.1 | Rowumc1CommandTableEntry | not-accessible | mandatory | An entry in the command table. |
| 1.3.6.1.4.1.2067.1.1.2.5.1.1.1 | Columnumc1CommandId | read-only | mandatory | This object identifies a command that a manager may execute in an agent. The following table describes the supported commands and their corresponding values. V… |
| 1.3.6.1.4.1.2067.1.1.2.5.1.1.2 | Columnumc1CommandArg | read-only | mandatory | This object specifies the argument to a command. The format of this object is: octet[0] contains command argument. octet[1] contains Time-out value for Command… |
| 1.3.6.1.4.1.2067.1.1.2.5.1.1.3 | Columnumc1CommandTransNbr | read-only | mandatory | In order to execute a command, a Management Application must first initiate a Get request to read the transaction number for a given command and a given argume… |
| 1.3.6.1.4.1.2067.1.1.2.5.2 | Tableumc1ResponseTable | not-accessible | mandatory | A Management Application may use the umc1ResponseTable to read response that was generated as a result of a command execution in an agent. The response data (s… |
| 1.3.6.1.4.1.2067.1.1.2.5.2.1 | Rowumc1ResponseTableEntry | not-accessible | mandatory | An entry in the Response table. |
| 1.3.6.1.4.1.2067.1.1.2.5.2.1.1 | Columnumc1ResponseTransNbr | read-only | mandatory | This object shall be used by the manager to retrieve the response of a command executed by the Agent. |
| 1.3.6.1.4.1.2067.1.1.2.5.2.1.2 | Columnumc1ResponseSeqNbr | read-only | mandatory | This object uniquely identifies the rows of umc1ResponseTable along with umc1ResponseTransNbr. It keeps track of the last fragment of the response data read by… |
| 1.3.6.1.4.1.2067.1.1.2.5.2.1.3 | Columnumc1ResponseData | read-only | mandatory | This object encapsulates the data corresponding to the umc1ResponseTransNbr and umc1ResponseSeqNbr. The first byte of this umc1ResponseData is a version byte. … |
| 1.3.6.1.4.1.2067.1.1.2.6 | Nodeumc1Span | |||
| 1.3.6.1.4.1.2067.1.1.2.6.1 | Scalarumc1TerminalSpanTableChangeSeqNum | read-only | mandatory | A sequence number used to indicate that the Terminal Span table, umc1TerminalSpanTable, has been modified and it needs to be re-read. Whenever the SNMP agent i… |
| 1.3.6.1.4.1.2067.1.1.2.6.2 | Tableumc1TerminalSpanTable | not-accessible | mandatory | This table contains current information about all Span Connecting two terminals in a UMC system. |
| 1.3.6.1.4.1.2067.1.1.2.6.2.1 | Rowumc1TerminalSpanTableEntry | not-accessible | mandatory | An entry in the Terminal Span table. |
| 1.3.6.1.4.1.2067.1.1.2.6.2.1.1 | Columnumc1TermSpanNearEndTerminalId | read-only | mandatory | The Terminal ID of a terminal at the near end of the span. |
| 1.3.6.1.4.1.2067.1.1.2.6.2.1.2 | Columnumc1TermSpanNearEndShelfId | read-only | mandatory | The Shelf ID of a shelf at the near end of span. |
| 1.3.6.1.4.1.2067.1.1.2.6.2.1.3 | Columnumc1TermSpanNearEndSlotId | read-only | mandatory | The Slot ID of a slot at the near end of span. |
| 1.3.6.1.4.1.2067.1.1.2.6.2.1.4 | Columnumc1TermSpanNearEndPitType | read-only | mandatory | The plug-in type at at the near end of span. |
| 1.3.6.1.4.1.2067.1.1.2.6.2.1.5 | Columnumc1TermSpanFarEndTerminalId | read-only | mandatory | The Terminal ID of a terminal at the far end of span. |
| 1.3.6.1.4.1.2067.1.1.2.6.2.1.6 | Columnumc1TermSpanFarEndShelfId | read-only | mandatory | The shelf ID of a shelf at the far end of span. |
| 1.3.6.1.4.1.2067.1.1.2.6.2.1.7 | Columnumc1TermSpanFarEndSlotId | read-only | mandatory | The Slot ID of a slot at the far end of span. |
| 1.3.6.1.4.1.2067.1.1.2.6.3 | Tableumc1TerminalSpanTableChangeHistoryTable | not-accessible | mandatory | This table records the near end and far end location of the inter terminal span whose addition/deletion to the UMC system caused the agent to emit umc1TrapTerm… |
| 1.3.6.1.4.1.2067.1.1.2.6.3.1 | Rowumc1TerminalSpanTableChangeHistoryEntry | not-accessible | mandatory | An entry in the history table. |
| 1.3.6.1.4.1.2067.1.1.2.6.3.1.1 | Columnumc1TerminalSpanTableChangeHistoryIndex | read-only | mandatory | This objects value matches the value of umc1TerminalSpanTableChangeSeqNum at the time the row was created. A valid value of this object is in the range of 1 th… |
| 1.3.6.1.4.1.2067.1.1.2.6.3.1.2 | Columnumc1TerminalSpanTableChangeHistoryData | read-only | mandatory | This object stores the near end and far end location of all inter terminal spans that were added to/deleted from the UMC system when umc1TrapTerminalSpanTableC… |
| 1.3.6.1.4.1.2067.1.1.2.6.4 | Scalarumc1ShelfSpanTableChangeSeqNum | read-only | mandatory | A sequence number used to indicate that the Shelf Span table, umc1ShelfSpanTable, has been modified and it needs to be re-read. Whenever the SNMP agent is rest… |
| 1.3.6.1.4.1.2067.1.1.2.6.5 | Tableumc1ShelfSpanTable | not-accessible | mandatory | This table contains current EBC/ELU links in a terminal in a UMC system. The near end of shelf span is always at EBC card and far end of shelf span at ELU card. |
| 1.3.6.1.4.1.2067.1.1.2.6.5.1 | Rowumc1ShelfSpanTableEntry | not-accessible | mandatory | An entry in the Shelf Span table. |
| 1.3.6.1.4.1.2067.1.1.2.6.5.1.1 | Columnumc1ShelfSpanNearEndTerminalId | read-only | mandatory | The Terminal ID of a terminal to which the requested shelf span belongs. |
| 1.3.6.1.4.1.2067.1.1.2.6.5.1.2 | Columnumc1ShelfSpanNearEndShelfId | read-only | mandatory | The Shelf ID of a shelf to which near end of requested shelf span belongs. |
| 1.3.6.1.4.1.2067.1.1.2.6.5.1.3 | Columnumc1ShelfSpanNearEndSlotId | read-only | mandatory | The slot ID of a slot to which near end of requested shelf span belongs. |
| 1.3.6.1.4.1.2067.1.1.2.6.5.1.4 | Columnumc1ShelfSpanNearEndPitType | read-only | mandatory | The plug-in type at the near end of span. |
| 1.3.6.1.4.1.2067.1.1.2.6.5.1.5 | Columnumc1ShelfSpanFarEndShelfId | read-only | mandatory | The Shelf ID of a shelf to which far end of requested shelf span belongs. |
| 1.3.6.1.4.1.2067.1.1.2.6.5.1.6 | Columnumc1ShelfSpanFarEndSlotId | read-only | mandatory | The slot ID of a slot to which far end of requested shelf span belongs. |
| 1.3.6.1.4.1.2067.1.1.2.6.5.1.7 | Columnumc1ShelfSpanFarEndPitType | read-only | mandatory | The plug-in type at the far end of span. |
| 1.3.6.1.4.1.2067.1.1.2.6.6 | Tableumc1ShelfSpanTableChangeHistoryTable | not-accessible | mandatory | This table records the near end and far end location of the inter shelf span whose addition/deletion to the UMC system caused the agent to emit umc1TrapShelfSp… |
| 1.3.6.1.4.1.2067.1.1.2.6.6.1 | Rowumc1ShelfSpanTableChangeHistoryEntry | not-accessible | mandatory | An entry in the history table. |
| 1.3.6.1.4.1.2067.1.1.2.6.6.1.1 | Columnumc1ShelfSpanTableChangeHistoryIndex | read-only | mandatory | This objects value matches the value of umc1ShelfSpanTableChangeSeqNum at the time the row was created. A valid value of this object is in the range of 1 throu… |
| 1.3.6.1.4.1.2067.1.1.2.6.6.1.2 | Columnumc1ShelfSpanTableChangeHistoryData | read-only | mandatory | This object stores the near end and far end location of all inter shelf spans that were added to/deleted from the UMC system when umc1TrapShelfSpanTableChange … |
| 1.3.6.1.4.1.2067.1.1.2.8 | Nodeumc1Alarm | |||
| 1.3.6.1.4.1.2067.1.1.2.8.1 | Scalarumc1AlmSeqTableChangeSeqNum | read-only | mandatory | A sequence number used to indicate that the alarm sequence table has been modified and needs to be re-read. Whenever the SNMP agent restarted, this value will … |
| 1.3.6.1.4.1.2067.1.1.2.8.2 | Tableumc1AlmSeqTable | not-accessible | mandatory | This table contains the sequence numbers for each terminal in a UMC system. The sequence numbers are used to indicate if the current alarm table for a given Te… |
| 1.3.6.1.4.1.2067.1.1.2.8.2.1 | Rowumc1AlmSeqEntry | not-accessible | mandatory | A single entry in the Alarm Sequence Table. |
| 1.3.6.1.4.1.2067.1.1.2.8.2.1.1 | Columnumc1AlmSeqTerminalId | read-only | mandatory | The Terminal that has generated the alarms we are tracking via this sequence number. |
| 1.3.6.1.4.1.2067.1.1.2.8.2.1.2 | Columnumc1AlmSeqNumber | read-only | mandatory | A counter which gets incremented each time an ALARM or Event for this terminal occurs. It is used to indicate wether the Current Alarm table for this terminal … |
| 1.3.6.1.4.1.2067.1.1.2.8.3 | Tableumc1CurAlmTable | not-accessible | mandatory | This table contains the currently active alarms in a UMC system (the LET and all of its connected terminals). Only alarms for reachable terminals are available… |
| 1.3.6.1.4.1.2067.1.1.2.8.3.1 | Rowumc1CurAlmEntry | not-accessible | mandatory | A single entry in the Current Alarm Table. |
| 1.3.6.1.4.1.2067.1.1.2.8.3.1.1 | Columnumc1CurAlmTerminalId | read-only | mandatory | The Terminal that has generated the alarm this record represents. The LET is 1, RST1 is 2, RST2 is 3, etc. |
| 1.3.6.1.4.1.2067.1.1.2.8.3.1.2 | Columnumc1CurAlmOccurrenceIndex | read-only | mandatory | A representation of the relative occurrence of the ALARM/EVENT. The contents of the octets in this OBJECT are actually the ONEs COMPLEMENT of the values repres… |
| 1.3.6.1.4.1.2067.1.1.2.8.3.1.3 | Columnumc1CurAlmTL1Message | read-only | mandatory | This is a TL1 formatted string representing the ALARM/EVENT |
| 1.3.6.1.4.1.2067.1.1.2.8.3.1.4 | Columnumc1CurAlmDetails | read-only | mandatory | This is an encoded representation of the alarm to be reported. The format of the encoded data is as follows : octet[0] umc1CurAlmDetails IMPLEMENTATION VERSION… |
| 1.3.6.1.4.1.2067.1.1.2.9 | Nodeumc1ManagerIf | |||
| 1.3.6.1.4.1.2067.1.1.2.9.1 | Nodeumc1Snmp | |||
| 1.3.6.1.4.1.2067.1.1.2.9.1.1 | Scalarumc1SnmpCommName | read-write | mandatory | The Community Name that allows read and write access to the UMC1000 MIB variables. Changing this variable will take immediate effect and so must be done with c… |
| 1.3.6.1.4.1.2067.1.1.2.9.1.3 | Scalarumc1SnmpTrapTypesEnabled | read-write | mandatory | This is a bit field that specifies which traps, if any, will be generated by the SNMP Agent. If the bit is set, then the traps of the indicated type will be ge… |
| 1.3.6.1.4.1.2067.1.1.2.9.1.4 | Scalarumc1SnmpTrapRcvrAddress | read-write | mandatory | The IP Address of the EMS platform to which traps are to be sent. |
| 1.3.6.1.4.1.2067.1.1.2.9.1.5 | Scalarumc1SnmpTrapRcvrPort | read-write | mandatory | The UDP Port to which the traps are sent. The default is port 162 |
| 1.3.6.1.4.1.2067.1.1.2.9.1.6 | Scalarumc1SnmpMgmtHost2Address | read-write | mandatory | The IP Address of the EMS platform on a Secondary Management Host to which traps are to be sent. |
| 1.3.6.1.4.1.2067.1.1.2.9.1.7 | Scalarumc1SnmpMgmtHost2TrapsEnabled | read-write | mandatory | A boolean value indicating whether this Management Host receives traps or not. |
| 1.3.6.1.4.1.2067.1.1.2.9.1.8 | Scalarumc1SnmpMgmtHost3Address | read-write | mandatory | The IP Address of the EMS platform on a Secondary Management Host to which traps are to be sent. |
| 1.3.6.1.4.1.2067.1.1.2.9.1.9 | Scalarumc1SnmpMgmtHost3TrapsEnabled | read-write | mandatory | A boolean value indicating whether this Management Host receives traps or not. |
| 1.3.6.1.4.1.2067.1.1.2.9.1.10 | Scalarumc1SnmpTrustedHostsEnabled | read-write | mandatory | A boolean value indicating whether Trusted Hosts are enabled or not. |
| 1.3.6.1.4.1.2067.1.1.2.9.1.11 | Scalarumc1SnmpTelnetPort | read-write | mandatory | The TCP Port on which the Telnet Server listens for connection requests. The default is port 23. |
| 1.3.6.1.4.1.2067.1.1.2.10 | Nodeumc1Topology | |||
| 1.3.6.1.4.1.2067.1.1.2.10.1 | Scalarumc1TopologyChangeSeqNum | read-only | mandatory | A sequence number used to indicate that the topology link table needs to be read again. Whenever the SNMP agent is restarted, this value will be reset to 0 (ze… |
| 1.3.6.1.4.1.2067.1.1.2.10.2 | Scalarumc1TopologyThisTerminal | read-only | mandatory | The ID of the terminal that contains the SNMP agent. This may, or may not, identify the root of the topology tree. The root of the toplogy tree is really an ab… |
| 1.3.6.1.4.1.2067.1.1.2.10.3 | Tableumc1TopologyLinkTable | not-accessible | mandatory | The link table. This table will be empty if only one terminal makes up this UMC. Only active links will be in this table. If a link is lost, then the correspon… |
| 1.3.6.1.4.1.2067.1.1.2.10.3.1 | Rowumc1TopologyLinkEntry | not-accessible | mandatory | An entry in the link table. |
| 1.3.6.1.4.1.2067.1.1.2.10.3.1.1 | Columnumc1TopologyLinkTerminalA | read-only | mandatory | The Terminal ID of the terminal closest to the root of the network tree. The terminal IDs start with 1. (E.g. the LET is 1, RST1 is 2, RST2 is 3, etc.) |
| 1.3.6.1.4.1.2067.1.1.2.10.3.1.2 | Columnumc1TopologyLinkTerminalB | read-only | mandatory | The Terminal ID of the terminal that connects to Terminal A. |
| 1.3.6.1.4.1.2067.1.1.2.11 | Nodeumc1DataService | |||
| 1.3.6.1.4.1.2067.1.1.2.11.1 | Tableumc1DsPlugInNameTable | not-accessible | mandatory | The Plug-in name table. This table maps the Plug-in type with the appropriate textual Plug-in name. This table does *not* support the get-next operation. |
| 1.3.6.1.4.1.2067.1.1.2.11.1.1 | Rowumc1DsPlugInNameEntry | not-accessible | mandatory | An entry in the Plug-in name table. |
| 1.3.6.1.4.1.2067.1.1.2.11.1.1.1 | Columnumc1DsPlugInType | read-only | mandatory | The numeric value associated with a UMC Plug-in. This is the index into the table |
| 1.3.6.1.4.1.2067.1.1.2.11.1.1.2 | Columnumc1DsPlugInName | read-only | mandatory | The name of the UMC Plug-in that is associated with the Plug-in type. |
| 1.3.6.1.4.1.2067.1.1.2.11.2 | Tableumc1DsAlarmStringTable | not-accessible | mandatory | The Alarm string table. This table maps the facility alarm number with the appropriate textual message string. This table does *not* support the get-next opera… |
| 1.3.6.1.4.1.2067.1.1.2.11.2.1 | Rowumc1DsAlarmStringEntry | not-accessible | mandatory | An entry in the Alarm string table. |
| 1.3.6.1.4.1.2067.1.1.2.11.2.1.1 | Columnumc1DsAlarmFacilityNumber | read-only | mandatory | The numeric value associated with a UMC alarm. This is the index into the table |
| 1.3.6.1.4.1.2067.1.1.2.11.2.1.2 | Columnumc1DsAlarmString | read-only | mandatory | The text string associated with the UMC alarm value. |
| 1.3.6.1.4.1.2067.1.1.2.12 | Scalarumc1TriggerTrapAllSeqNumbers | read-only | mandatory | This object provides a mechanism for triggering the 'umc1TrapAllSeqNbrDump' trap. A GET operation to read its value shall trigger a trap event and return the v… |
| 1.3.6.1.4.1.2067.1.1.2.13 | Nodeumc1SystemTcaEvent | |||
| 1.3.6.1.4.1.2067.1.1.2.13.1 | Scalarumc1SystemTCASeqNum | read-only | mandatory | A sequence number used to indicate that the Threshold Crossing Alert History (TCA) Table, umc1SystemTCAHistoryTable, has been modified and it needs to be re-re… |
| 1.3.6.1.4.1.2067.1.1.2.13.2 | Tableumc1SystemTCAHistoryTable | not-accessible | mandatory | The EMS uses this table to synchronize its internal representation of the Threshold Crossing Alert data with that managed by the UMC Agent. A trap is issued to… |
| 1.3.6.1.4.1.2067.1.1.2.13.2.1 | Rowumc1SystemTCAHistoryTableEntry | not-accessible | mandatory | An entry in the TCA History table. |
| 1.3.6.1.4.1.2067.1.1.2.13.2.1.1 | Columnumc1SystemTCAHistoryTableSeqNum | read-only | mandatory | This object's value matches the value of umc1SystemTCASeqNum at the time the row was created. A valid value of this object is in the range of 1 through umc1Sys… |
| 1.3.6.1.4.1.2067.1.1.2.13.2.1.2 | Columnumc1SystemTCAHistoryTableChgData | read-only | mandatory | This object records the list of TCAs managed by the umc1SystemTCAHistoryTable. The format of the object is as follows: octet [0] Version number of the octet re… |
| 1.3.6.1.4.1.2067.1.1.2.17 | Nodeumc1F5Loopback | |||
| 1.3.6.1.4.1.2067.1.1.2.17.1 | Tableumc1F5LoopbackRequestTable | not-accessible | mandatory | Contains the contents of an F5 loopback request |
| 1.3.6.1.4.1.2067.1.1.2.17.1.1 | Rowumc1F5LoopbackRequestEntry | not-accessible | mandatory | An entry in the terminal provisioning table. The data is indexed by the terminal whose data is represented. |
| 1.3.6.1.4.1.2067.1.1.2.17.1.1.1 | Columnumc1F5LoopbackTransactionNumber | read-write | mandatory | A sequence number used to associate the request with the trap that contains the F5 loopback results |
| 1.3.6.1.4.1.2067.1.1.2.17.1.1.2 | Columnumc1F5LoopbackTransactionIpAddress | read-write | mandatory | An IP address of the host that requested the loopback |
| 1.3.6.1.4.1.2067.1.1.2.17.1.1.3 | Columnumc1F5LoopbackTransactionIbMessage | read-write | mandatory | Contents of the ib message that will be sent to the interface card, the tOAMLpbkRequest size + 1 byte for the destination icard |
| 1.3.6.1.4.1.2067.1.1.2.18 | Nodeumc1LoopDiagnostics | |||
| 1.3.6.1.4.1.2067.1.1.2.18.1 | Tableumc1LoopDiagnosticsRequestTable | not-accessible | mandatory | Contains the contents of an ADSL 2+ loop diagnostics request. The EMS shall issue this SET to start the LoopDiagnostics on the specified card. When the operati… |
| 1.3.6.1.4.1.2067.1.1.2.18.1.1 | Rowumc1LoopDiagnosticsRequestEntry | not-accessible | mandatory | Format for Umc1LoopDiagnosticsRequestTable. |
| 1.3.6.1.4.1.2067.1.1.2.18.1.1.1 | Columnumc1LoopDiagnosticsRequestTransactionNumber | read-write | mandatory | A sequence number used to associate the request with the trap that contains the LoopCharacteristics results, and subsequent Get requests. |
| 1.3.6.1.4.1.2067.1.1.2.18.1.1.2 | Columnumc1LoopDiagnosticsRequestIpAddress | read-write | mandatory | An IP address of the host that requested the diagnostics. |
| 1.3.6.1.4.1.2067.1.1.2.18.1.1.3 | Columnumc1LoopDiagnosticsRequestData | read-write | mandatory | Loop diagnostics request in the following format: byte[0] - version number (1 for now) byte[1] - ADSL PIT byte[2] - ADSL Port number (0-based) byte[3] - Termin… |
| 1.3.6.1.4.1.2067.1.1.2.18.2 | Tableumc1LoopDiagnosticsResponseTable | not-accessible | mandatory | Once the LoopDiagnostics have been performed using the umc1LoopDiagnosticsRequestTable, the results are cached on the card. The EMS can then ask for the remain… |
| 1.3.6.1.4.1.2067.1.1.2.18.2.1 | Rowumc1LoopDiagnosticsResponseEntry | not-accessible | mandatory | The format of the umc1LoopDiagnosticsResponseTable. |
| 1.3.6.1.4.1.2067.1.1.2.18.2.1.1 | Columnumc1LoopDiagnosticsResponseTransactionNumber | read-only | mandatory | A sequence number used to associate the test that was performed with the results of the test |
| 1.3.6.1.4.1.2067.1.1.2.18.2.1.2 | Columnumc1LoopDiagnosticsResponseIpAddress | read-only | mandatory | An IP address of the host that requested the diagnostics |
| 1.3.6.1.4.1.2067.1.1.2.18.2.1.3 | Columnumc1LoopDiagnosticsResponseStartToneIdentifier | read-only | mandatory | Enumerated value from SIS: 0x01 = Loop Characteristics 0x02 = CCF for Tones 0 to 42 0x03 = CCF for Tones 43 to 85 0x04 = CCF for Tones 86 to 128 0x05 = CCF for… |
| 1.3.6.1.4.1.2067.1.1.2.18.2.1.4 | Columnumc1LoopDiagnosticsResponseEndToneIdentifier | read-only | mandatory | The last tone represented in the message, same enumeration as start tone. |
| 1.3.6.1.4.1.2067.1.1.2.18.2.1.6 | Columnumc1LoopDiagnosticsResponseData | read-only | mandatory | Contents of the LoopDiagnostics data in the following format: byte [0] Start tone of response data (from umc1LoopDiagnosticsDataStartToneIdentifier enum) byte … |
| 1.3.6.1.4.1.2067.1.1.2.100 | Nodeumc1Trap | |||
| 1.3.6.1.4.1.2067.1.1.2.100.1 | Scalarumc1SoftwareDiagMessageTimestamp | read-only | mandatory | The time the message was reported by the IPMI card. The format of the umc1SoftwareDiagMessageTimestamp is as follows: octet[0] High 8-bits of the YEAR octet[1]… |
| 1.3.6.1.4.1.2067.1.1.2.100.2 | Scalarumc1SoftwareDiagMessageType | read-only | mandatory | A representation of the type of diagnostic message to follow. The format of the umc1SoftwareDiagMessageType is as follows: octet[0] Diagnostic message type (SY… |
| 1.3.6.1.4.1.2067.1.1.2.100.3 | Scalarumc1SoftwareDiagMessageString | read-only | mandatory | The diagnostic message itself. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| DataOperation | INTEGER | ||
| DbActionType | INTEGER | ||
| PlugInType | INTEGER | ||
| ShelfIdType | INTEGER | ||
| SlotIdType | INTEGER | ||
| TerminalIdType | INTEGER | ||
| V5GroupIdType | INTEGER |