MIB Viewer

USB-MIB

49 objects
The MIB module to describe the USB interface.
Imported Objects
IF-MIBInterfaceIndexOrZero
SNMPv2-CONFMODULE-COMPLIANCE OBJECT-GROUP
SNMPv2-SMICounter32 experimental Integer32 MODULE-IDENTITY OBJECT-TYPE
SNMPv2-TCMacAddress TEXTUAL-CONVENTION TruthValue
OIDNameAccessStatusDescription
1.3.6.1.3.103IdentityusbMibThe MIB module to describe the USB interface.
1.3.6.1.3.103.1NodeusbMibObjects
1.3.6.1.3.103.1.1ScalarusbNumberread-onlycurrentThe number of ports regardless of their current state in the usb general port table
1.3.6.1.3.103.1.2TableusbPortTablenot-accessiblecurrentA list of port entries. The number of entries is given by the value usbNumber.
1.3.6.1.3.103.1.2.1RowusbPortEntrynot-accessiblecurrentStatus and parameter values for the USB port.
1.3.6.1.3.103.1.2.1.1ColumnusbPortIndexread-onlycurrentThe unique identifier of the USB port hardware. By convention and if possible, hardware port numbers map directly to external connectors.
1.3.6.1.3.103.1.2.1.2ColumnusbPortTyperead-onlycurrentThe type of the USB port
1.3.6.1.3.103.1.2.1.3ColumnusbPortRateread-onlycurrentThe USB port rate that could be low-speed(1) for 1.5 Mbps, full-speed(2) for 12Mbps or high-speed(3) for USB 2.0
1.3.6.1.3.103.1.3TableusbDeviceTablenot-accessiblecurrentA list of USB device ports. Usually the device has only one USB device port
1.3.6.1.3.103.1.3.1RowusbDeviceEntrynot-accessiblecurrentStatus and parameter values for the USB device port.
1.3.6.1.3.103.1.3.1.1ColumnusbDeviceIndexread-onlycurrentThe index is identical to usbPortIndex for the correspondent USB port
1.3.6.1.3.103.1.3.1.2ColumnusbDevicePowerread-onlycurrentthe way USB device port is powered
1.3.6.1.3.103.1.3.1.3ColumnusbDeviceVendorIDread-onlycurrentThe USB device port vendor HEX-formatted string as it is provided to the USB host by the USB device
1.3.6.1.3.103.1.3.1.4ColumnusbDeviceProductIDread-onlycurrentThe product ID HEX-formatted string as it is provided to the USB host by the USB device
1.3.6.1.3.103.1.3.1.5ColumnusbDeviceNumberConfigurationsread-onlycurrentThe total number of configurations the USB port supports. Device port should support at least one configuration
1.3.6.1.3.103.1.3.1.6ColumnusbDeviceActiveClassread-onlycurrentThis object returns USB Device Class type of the active configuration
1.3.6.1.3.103.1.3.1.7ColumnusbDeviceStatusread-onlycurrentCurrent status of the USB device state machine
1.3.6.1.3.103.1.3.1.8ColumnusbDeviceEnumCounterread-onlycurrentTotal number reconnections (enumerations) since device is operational
1.3.6.1.3.103.1.3.1.9ColumnusbDeviceRemoteWakeupread-onlycurrentIf set to true(1), the device supports Remote Wakeup function. If set to false(2), the device doesn't support it
1.3.6.1.3.103.1.3.1.10ColumnusbDeviceRemoteWakeupOnread-onlycurrentIf set to true(1), the remote wakeup function is activated by the host. If set to false(2), remote wakeup function is not active.
1.3.6.1.3.103.1.4TableusbCDCTablenot-accessiblecurrentA list of Communication Device Class (CDC) interfaces supported by the USB device. It could be more then one CDC interface for the device that expose more then…
1.3.6.1.3.103.1.4.1RowusbCDCEntrynot-accessiblecurrentStatus and parameter values for CDC device
1.3.6.1.3.103.1.4.1.1ColumnusbCDCIndexread-onlycurrentThe index is identical to usbPortIndex for the correspondent USB port
1.3.6.1.3.103.1.4.1.2ColumnusbCDCIfIndexread-onlycurrentThe variable uniquely identifies the interface index which this CDC device is representing
1.3.6.1.3.103.1.4.1.3ColumnusbCDCSubclassread-onlycurrentSubclass used in data transfer in Communication Device Class
1.3.6.1.3.103.1.4.1.4ColumnusbCDCVersionread-onlycurrentString that describes the version of Communication Device Class in HEX format (Major, Minor)
1.3.6.1.3.103.1.4.1.5ColumnusbCDCDataTransferTyperead-onlycurrentType of data transfer for Data Class Interface used by the Communication Device. Isochronious mode is used for synchronous(1) and bulk transfer mode is used fo…
1.3.6.1.3.103.1.4.1.6ColumnusbCDCDataEndpointsread-onlycurrentNumber of the data endpoints (IN and OUT) used by the Communication Device. If the networking device is in default interface setting, there are are no data end…
1.3.6.1.3.103.1.4.1.7ColumnusbCDCStallsread-onlycurrentTotal number of times USB Data interface recovered from stall since re-initialization and while the port state was 'up' or 'test'.
1.3.6.1.3.103.1.5TableusbCDCEtherTablenot-accessiblecurrentA list of Communication Device Class (CDC) USB devices that support Ethernet Networking Control Model.
1.3.6.1.3.103.1.5.1RowusbCDCEtherEntrynot-accessiblecurrentStatus and parameter values for CDC devices that support Ethernet Networking Control Model
1.3.6.1.3.103.1.5.1.1ColumnusbCDCEtherIndexread-onlycurrentThe index is identical to usbPortIndex for the correspondent USB port
1.3.6.1.3.103.1.5.1.2ColumnusbCDCEtherIfIndexread-onlycurrentThe variable uniquely identifies the interface index to which this CDC device is connected
1.3.6.1.3.103.1.5.1.3ColumnusbCDCEtherMacAddressread-onlycurrentThe 48bit MAC address that is provided by USB CDC device to the host. This address will be used as the source address of Ethernet frames sent by the host over …
1.3.6.1.3.103.1.5.1.4ColumnusbCDCEtherPacketFilterread-onlycurrentBitmap indicates the host requirements to the USB device to perform Ethernet packet filtering of the particular type frames directed to the host
1.3.6.1.3.103.1.5.1.5ColumnusbCDCEtherDataStatisticsCapabilitiesread-onlycurrentBitmap indicates the ability to collect Ethernet statistics of different types as it provided in Ethernet Networking Functional Descriptor. If the Particular b…
1.3.6.1.3.103.1.5.1.6ColumnusbCDCEtherDataCheckErrsread-onlycurrentTotal number of frames with an invalid frame check sequence, input from the USB Data interface since system re-initialization and while the port state was 'up'…
1.3.6.1.3.103.1.6TableusbCDCEtherXmtAddressTablenot-accessiblecurrentThis table contains an entry for each multicast address for which the system will transmit packets/frames on a particular USB interface.
1.3.6.1.3.103.1.6.1RowusbCDCEtherXmtAddressEntrynot-accessiblecurrentA list of objects identifying an address for which the system will send packets/frames on the particular USB interface identified by the index values usbCDCInd…
1.3.6.1.3.103.1.6.1.1ColumnifCDCEtherXmtAddressread-onlycurrentAn address for which the system will will send packets/frames on the particular USB interface. The address only could be set by the host by using the command f…
1.3.6.1.3.103.2NodeusbMibNotification
1.3.6.1.3.103.3NodeusbMibConformance
1.3.6.1.3.103.3.1NodeusbMibCompliances
1.3.6.1.3.103.3.1.1ComplianceusbMibBasicCompliancecurrentThe compliance statement for devices that implement USB MIB
1.3.6.1.3.103.3.2NodeusbMibGroups
1.3.6.1.3.103.3.2.1GroupusbMibBasicGroupcurrentGroup of objects that are mandatory to support by device implementing this MIB
1.3.6.1.3.103.3.2.2GroupusbMibCDCGroupcurrentThis group is implemented only in devices having at least one CDC interface
1.3.6.1.3.103.3.2.3GroupusbMibCDCEtherGroupcurrentThis group is implemented only in devices having at least one CDC interface that uses Ethernet Networking Control Model or remote NDIS
1.3.6.1.3.103.3.2.4GroupusbCDCEtherXmtAddressGroupcurrentThis group is implemented only for USB CDC interfaces that have transmit multicast filtering capabilities.