USR-GWCBSP-MIB
33 objects
The commWorks enterprise defined MIB objects for the GWC BSP specific platform
Imported Objects
| SNMPv2-SMI | Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE |
| USR-DEFINITIONS-MIB | common UsrConfigStatus UsrDisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.429.4.38 | IdentityusrGWCBSP | The commWorks enterprise defined MIB objects for the GWC BSP specific platform | ||
| 1.3.6.1.4.1.429.4.38.1 | ScalarusrGWCBSPProductCode | read-only | current | The Code number assigned for the product |
| 1.3.6.1.4.1.429.4.38.2 | ScalarusrGWCBSPHWVersion | read-only | current | Hardware version number |
| 1.3.6.1.4.1.429.4.38.3 | ScalarusrGWCBSPSerialNumber | read-only | current | Serial number of the product |
| 1.3.6.1.4.1.429.4.38.4 | ScalarusrGWCBSPCardID | read-only | current | Assigned card ID |
| 1.3.6.1.4.1.429.4.38.5 | ScalarusrGWCBSPFeatureKey | read-only | current | Bitmap of the features supported in the product |
| 1.3.6.1.4.1.429.4.38.6 | ScalarusrGWCBSPNICID | read-only | current | NIC card Identifier |
| 1.3.6.1.4.1.429.4.38.7 | ScalarusrGWCBSPNICName | read-only | current | NIC card name |
| 1.3.6.1.4.1.429.4.38.8 | ScalarusrGWCBSPNACID | read-only | current | NAC card Identifier |
| 1.3.6.1.4.1.429.4.38.9 | ScalarusrGWCBSPNACName | read-only | current | NAC Card Name |
| 1.3.6.1.4.1.429.4.38.10 | ScalarusrGWCBSPCPUType | read-only | current | CPU of the product |
| 1.3.6.1.4.1.429.4.38.11 | ScalarusrGWCBSPCPUSpeed | read-only | current | The speed in Mhz in which the CPU runs |
| 1.3.6.1.4.1.429.4.38.12 | ScalarusrGWCBSPBootMode | read-write | current | This variable decides the booting type. The possible booting types are FLASH ( the boot image is taken from the flash memory) or NETWORK (the boot image is dow… |
| 1.3.6.1.4.1.429.4.38.13 | ScalarusrGWCBSPIPConfigSource | read-write | current | The IP configuration source |
| 1.3.6.1.4.1.429.4.38.14 | TableusrGWCBSPIPTable | not-accessible | current | IP Interface Table |
| 1.3.6.1.4.1.429.4.38.14.1 | RowusrGWCBSPIPEntry | not-accessible | current | IP interface Table |
| 1.3.6.1.4.1.429.4.38.14.1.1 | ColumnusrGWCBSPInterfaceIndex | not-accessible | current | The boot interface of the product. The possible values are eth:1 or eth:2 |
| 1.3.6.1.4.1.429.4.38.14.1.2 | ColumnusrGWCBSPTFTPServer | read-write | current | TFTP server used to down load the application image or upload crashdump file |
| 1.3.6.1.4.1.429.4.38.14.1.3 | ColumnusrGWCBSPIPAddress | read-write | current | IP address of the selected interface |
| 1.3.6.1.4.1.429.4.38.14.1.4 | ColumnusrGWCBSPIPGateway | read-write | current | IP gateway for the selected interface |
| 1.3.6.1.4.1.429.4.38.14.1.5 | ColumnusrGWCBSPNetMask | read-write | current | IP netmask of the selected interface |
| 1.3.6.1.4.1.429.4.38.14.1.6 | ColumnusrGWCBSPCrashDumpFile | read-write | current | File name to which the crashdump will be uploaded - maximum length is 127 chars + terminator |
| 1.3.6.1.4.1.429.4.38.14.1.7 | ColumnusrGWCBSPNetworkFile | read-write | current | The download application image file name - the maximum length is 127 characters + terminator |
| 1.3.6.1.4.1.429.4.38.14.1.8 | ColumnusrGWCBSPTFTPStatus | read-write | current | TFTP download config type |
| 1.3.6.1.4.1.429.4.38.15 | ScalarusrGWCBSPCrashEnable | read-write | current | Says whether the crashupload option is Enabled or Disabled |
| 1.3.6.1.4.1.429.4.38.16 | ScalarusrGWCBSPDiag | read-write | current | To enable or disable Mfg Diagnostics |
| 1.3.6.1.4.1.429.4.38.17 | ScalarusrGWCBSPDipSwitches | read-only | current | The current DIP switch settings |
| 1.3.6.1.4.1.429.4.38.18 | ScalarusrGWCBSPCrashDump | read-only | current | Information about the previous crash - not accessible via SNMP, CLI only. |
| 1.3.6.1.4.1.429.4.38.19 | ScalarusrGWCBSPInterface | read-write | current | The boot interface of the product. The possible values are eth:1 or eth:2 |
| 1.3.6.1.4.1.429.4.38.20 | ScalarusrGWCBSPCrashDumpReset | read-write | current | To Reset the Last Crash Dump |
| 1.3.6.1.4.1.429.4.38.21 | ScalarusrGWCBSPCommandLineParameters | read-write | current | Contains the command line parameters which are passed to the router at startup |
| 1.3.6.1.4.1.429.4.38.22 | ScalarusrGWCBSPCFMStatusFlag | read-write | current | This variable controls saving and loading of configuration information for the bsp manager Module. The value can be set to either save or load by a management … |
| 1.3.6.1.4.1.429.4.38.23 | ScalarusrGWCBSPKernelVersion | read-only | current | The Kernel Version |