MIB Viewer

USR-GWCWAN-MIB

53 objects
The commWorks enterprise defined MIB objects for the Network Element.
Imported Objects
OIDNameAccessStatusDescription
1.3.6.1.4.1.429.4.58IdentityusrGwcwanThe commWorks enterprise defined MIB objects for the Network Element.
1.3.6.1.4.1.429.4.58.1TableusrGwcwanIfTablenot-accessiblecurrentA list of Gwcwan interface entries.
1.3.6.1.4.1.429.4.58.1.1RowusrGwcwanIfEntrynot-accessiblecurrentParameter values for a Gwcwan interfaces.
1.3.6.1.4.1.429.4.58.1.1.1ColumnusrGwcwanIfIndexread-onlycurrentThe value of ifIndex for the port. By convention and if possible, hardware port numbers map directly to external connectors. The value for each port must remai…
1.3.6.1.4.1.429.4.58.1.1.2ColumnusrGwcwanIfNameread-onlycurrentThe textual name of the interface. It is of the form wan:# for physical interfaces and of the form wan:#/linkname for logicalinterfaces where # is the physical…
1.3.6.1.4.1.429.4.58.1.1.3ColumnusrGwcwanIfTyperead-onlycurrentThis helps determine the type of physical interface / NIC Type/ WAN Driver Type.
1.3.6.1.4.1.429.4.58.2TableusrGwcwanV35IfTablenot-accessiblecurrentA list of Gwcwan V35 virtual interface entries.
1.3.6.1.4.1.429.4.58.2.1RowusrGwcwanV35IfEntrynot-accessiblecurrentParameter values for V35 Gwcwan virtual interface.
1.3.6.1.4.1.429.4.58.2.1.1ColumnusrGwcwanV35IfIndexread-onlycurrentThe value of ifIndex for the port. By convention and if possible, hardware port numbers map directly to external connectors. The value for each port must remai…
1.3.6.1.4.1.429.4.58.2.1.2ColumnusrGwcwanV35ClockRefModeread-writecurrentValid only when usrGwcwanIfType is usrGwcwanV35. The clock ref mode of this v35 interface
1.3.6.1.4.1.429.4.58.2.1.3ColumnusrGwcwanV35ClockInvertedModeread-writecurrentValid only when usrGwcwanIfType is usrGwcwanV35. The Clock inverted mode
1.3.6.1.4.1.429.4.58.2.1.4ColumnusrGwcwanV35FlagIdlePatternread-writecurrentValid only when usrGwcwanIfType is usrGwcwanV35. This mib is an addon to rfc1659 rs232SyncPortIdlePattern mib. rfc1659 does not support idle pattern as flag (7…
1.3.6.1.4.1.429.4.58.2.1.5ColumnusrGwcwanV35PortTyperead-writecurrentThe port's hardware type. This is actually a subset of rs232PortType parameter defined by RFC1659. It was necessary to re-define this variable since Write acce…
1.3.6.1.4.1.429.4.58.3TableusrGwcwanT1E1IfTablenot-accessiblecurrentA list of Gwcwan T1E1 virtual interface entries.
1.3.6.1.4.1.429.4.58.3.1RowusrGwcwanT1E1IfEntrynot-accessiblecurrentParameter values for T1E1 Gwcwan virtual interface.
1.3.6.1.4.1.429.4.58.3.1.1ColumnusrGwcwanT1E1IfIndexread-onlycurrentThe value of ifIndex for the port. By convention and if possible, hardware port numbers map directly to external connectors. The value for each port must remai…
1.3.6.1.4.1.429.4.58.3.1.2ColumnusrGwcwanDS1CableLenread-writecurrentValid only when usrGwcwanIfType is usrGwcwanDS1. The cable length of DS1 interface. If the interface is long haul, use usrGwcwanDS1CableLenLongHaul. Otherwise,…
1.3.6.1.4.1.429.4.58.3.1.3ColumnusrGwcwanDS1LineBuildoutread-writecurrentValid only when usrGwcwanIfType is usrGwcwanDS1. The line build out of DS1 interface.
1.3.6.1.4.1.429.4.58.4TableusrGwcwanWSOCKIfTablenot-accessiblecurrentA list of Gwcwan WSOCK virtual interface entries.
1.3.6.1.4.1.429.4.58.4.1RowusrGwcwanWSOCKIfEntrynot-accessiblecurrentParameter values for WSOCK Gwcwan virtual interface.
1.3.6.1.4.1.429.4.58.4.1.1ColumnusrGwcwanWSOCKIfIndexread-onlycurrentThe value of ifIndex for the port. By convention and if possible, hardware port numbers map directly to external connectors. The value for each port must remai…
1.3.6.1.4.1.429.4.58.4.1.2ColumnusrGwcwanIPConnTyperead-writecurrentValid only when usrGwcwanIfType is usrGwcwanWSOCK. The type of IP service to use to make the sockets connection (UDP or TCP).
1.3.6.1.4.1.429.4.58.4.1.3ColumnusrGwcwanRemoteIpread-writecurrentValid only when usrGwcwanIfType is usrGwcwanWSOCK. The remote IP address this virtual port sends to.
1.3.6.1.4.1.429.4.58.4.1.4ColumnusrGwcwanRemotePortread-writecurrentValid only when usrGwcwanIfType is usrGwcwanWSOCK. The remote UDP/IP port this virtual port sends to.
1.3.6.1.4.1.429.4.58.4.1.5ColumnusrGwcwanLocalPortread-writecurrentValid only when usrGwcwanIfType is usrGwcwanWSOCK. The local UDP/IP port this virtual port listens to.
1.3.6.1.4.1.429.4.58.5TableusrGwcwanT1E1TrapEnaTablenot-accessiblecurrentA trap enable table that defines a column for every trap that a DS1 entity can generate.
1.3.6.1.4.1.429.4.58.5.1RowusrGwcwanT1E1TrapEnaEntrynot-accessiblecurrentThere is one entry in this table for every DS1 that exists in the chassis.
1.3.6.1.4.1.429.4.58.5.1.1ColumnusrGwcwanT1E1TrapEnaDS1Indexread-onlycurrentThe value of ifIndex for the DS1/ES1 port. By convention and if possible, hardware port numbers map directly to external connectors. The value for each port mu…
1.3.6.1.4.1.429.4.58.5.1.2ColumnusrGwcwanT1E1TrapEnaYellowAlarmread-writecurrentEnable the generation of an SNMP trap for Far-End Loss of Frame condition (signaled by a received Yellow Alarm) on the specified DS1. This corresponds to dsx1R…
1.3.6.1.4.1.429.4.58.5.1.3ColumnusrGwcwanT1E1TrapEnaSndYellowAlarmread-writecurrentEnable the generation of an SNMP trap for Near End Sending Yellow Alarm condition on the specified DS1. This corresponds to dsx1XmtFarEndLOF bit in dsx1LineSta…
1.3.6.1.4.1.429.4.58.5.1.4ColumnusrGwcwanT1E1TrapEnaAlarmIndSignalread-writecurrentEnable the generation of an SNMP trap for Far End Sending Alarm Indication Signal condition on the specified DS1. This corresponds to dsx1RcvAIS bit in dsx1Lin…
1.3.6.1.4.1.429.4.58.5.1.5ColumnusrGwcwanT1E1TrapEnaSndAlarmIndSignalread-writecurrentEnable the generation of an SNMP trap for Near End Sending Alarm Indication Signal condition on the specified DS1. This corresponds to dsx1XmtAIS bit in dsx1Li…
1.3.6.1.4.1.429.4.58.5.1.6ColumnusrGwcwanT1E1TrapEnaRedAlarmread-writecurrentEnable the generation of an SNMP trap for Near End Loss Of Frame (in red alarm condition) condition on the specified DS1. This corresponds to dsx1LossOfFrame b…
1.3.6.1.4.1.429.4.58.5.1.7ColumnusrGwcwanT1E1TrapEnaLossOfSignalread-writecurrentEnable the generation of an SNMP trap for Near End Loss Of Signal condition on the specified DS1. This corresponds to dsx1LossOfSignal bit in dsx1LineStatus va…
1.3.6.1.4.1.429.4.58.5.1.8ColumnusrGwcwanT1E1TrapEnaloopBackread-writecurrentEnable the generation of an SNMP trap for Near End loopback condition on the specified DS1. This corresponds to dsx1LoopbackState bit in dsx1LineStatus variable
1.3.6.1.4.1.429.4.58.5.1.9ColumnusrGwcwanT1E1TrapEnaRcvTestCoderead-writecurrentEnable the generation of an SNMP trap for Near End test code condition on the specified DS1. This corresponds to dsx1RcvTestCode bit in dsx1LineStatus variable
1.3.6.1.4.1.429.4.58.6NodeusrGwcwanTraps
1.3.6.1.4.1.429.4.58.6.1NotificationusrGwcwanT1E1YellowAlarmcurrentThis trap is generated for an active Far-End Loss of Frame condition (signaled by a received Yellow Alarm) on the specified DS1.
1.3.6.1.4.1.429.4.58.6.2NotificationusrGwcwanT1E1ClrYellowAlarmcurrentThis trap is generated when Far-End Loss of Frame condition (signaled by a received Yellow Alarm) clears on the specified DS1.
1.3.6.1.4.1.429.4.58.6.3NotificationusrGwcwanT1E1SndYellowAlarmcurrentThis trap is generated for an active Near End Sending Yellow Alarm condition on the specified DS1.
1.3.6.1.4.1.429.4.58.6.4NotificationusrGwcwanT1E1ClrSndYellowAlarmcurrentThis trap is generated when Near End Sending Yellow Alarm condition clears on the specified DS1.
1.3.6.1.4.1.429.4.58.6.5NotificationusrGwcwanT1E1AlarmIndSignalcurrentThis trap is generated for an active Far End Sending Alarm Indication Signal condition on the specified DS1.
1.3.6.1.4.1.429.4.58.6.6NotificationusrGwcwanT1E1ClrAlarmIndSignalcurrentThis trap is generated when Far End Sending Alarm Indication Signal condition clears on the specified DS1.
1.3.6.1.4.1.429.4.58.6.7NotificationusrGwcwanT1E1SndAlarmIndSignalcurrentThis trap is generated for an active Near End Sending Alarm Indication Signal condition on the specified DS1.
1.3.6.1.4.1.429.4.58.6.8NotificationusrGwcwanT1E1ClrSndAlarmIndSignalcurrentThis trap is generated when Near End Sending Alarm Indication Signal condition clears on the specified DS1.
1.3.6.1.4.1.429.4.58.6.9NotificationusrGwcwanT1E1RedAlarmcurrentThis trap is generated for an active Near End Loss Of Frame (in red alarm condition) condition on the specified DS1.
1.3.6.1.4.1.429.4.58.6.10NotificationusrGwcwanT1E1ClrRedAlarmcurrentThis trap is generated when Near End Loss Of Frame (in red alarm condition) condition clears on the specified DS1.
1.3.6.1.4.1.429.4.58.6.11NotificationusrGwcwanT1E1LossOfSignalcurrentThis trap is generated for an active Near End Loss Of Signal condition on the specified DS1.
1.3.6.1.4.1.429.4.58.6.12NotificationusrGwcwanT1E1ClrLossOfSignalcurrentThis trap is generated when Near End Loss Of Signal condition clears on the specified DS1.
1.3.6.1.4.1.429.4.58.6.13NotificationusrGwcwanT1E1loopBackcurrentThis trap is generated for an active Near End loopback condition on the specified DS1.
1.3.6.1.4.1.429.4.58.6.14NotificationusrGwcwanT1E1ClrloopBackcurrentThis trap is generated when Near End loopback condition clears on the specified DS1.
1.3.6.1.4.1.429.4.58.6.15NotificationusrGwcwanT1E1RcvTestCodecurrentThis trap is generated for an active Near End test code condition on the specified DS1.
1.3.6.1.4.1.429.4.58.6.16NotificationusrGwcwanT1E1ClrRcvTestCodecurrentThis trap is generated when Near End test code condition clears on the specified DS1.