USR-HACN-MIB
78 objects
The commWorks enterprise defined MIB objects for HACN functionality.
Imported Objects
| SNMPv2-SMI | Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DisplayString TruthValue |
| USR-DEFINITIONS-MIB | common UsrConfigStatus UsrSpecialU32 |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.429.4.91 | IdentityusrHACN | The commWorks enterprise defined MIB objects for HACN functionality. | ||
| 1.3.6.1.4.1.429.4.91.1 | NodeusrHACNConfig | |||
| 1.3.6.1.4.1.429.4.91.1.1 | ScalarusrHACNRunIP | read-write | current | The IP Address to be used while running. |
| 1.3.6.1.4.1.429.4.91.1.2 | ScalarusrHACNSecret | read-write | current | The secret configured between HACN and HA. |
| 1.3.6.1.4.1.429.4.91.1.3 | ScalarusrHACNPacketRetryCount | read-write | current | The packet retry count for HACN |
| 1.3.6.1.4.1.429.4.91.1.4 | ScalarusrHACNPacketRetryTimeout | read-write | current | The packet retry timeout for HACN. |
| 1.3.6.1.4.1.429.4.91.1.5 | TableusrVirtualHAConfigTable | not-accessible | current | List of configured Virtual HA's |
| 1.3.6.1.4.1.429.4.91.1.5.1 | RowusrVirtualHAConfigEntry | not-accessible | current | The table of Virtual HA's |
| 1.3.6.1.4.1.429.4.91.1.5.1.1 | ColumnusrVirtualHAConfigIndexNum | read-only | current | The Virtual HA configuration table entry index |
| 1.3.6.1.4.1.429.4.91.1.5.1.2 | ColumnusrVirtualHARunIP | read-write | current | The Virtual HA Run IP |
| 1.3.6.1.4.1.429.4.91.1.5.1.3 | ColumnusrVirtualHAIpPoolStart | read-write | current | The Virtual HA IP Pool Start |
| 1.3.6.1.4.1.429.4.91.1.5.1.4 | ColumnusrVirtualHAIpPoolSize | read-write | current | The Virtual HA IP Pool Size |
| 1.3.6.1.4.1.429.4.91.1.5.1.5 | ColumnusrVirtualHALifetime | read-write | current | The Virtual HA Lifetime value |
| 1.3.6.1.4.1.429.4.91.1.5.1.6 | ColumnusrVirtualHATimeStampDrift | read-write | current | The Virtual HA Timestamp drift |
| 1.3.6.1.4.1.429.4.91.1.5.1.7 | ColumnusrVirtualHACmdType | read-write | current | The Virtual HA configuration command. This object should get values 1, 2, 3 or 4 depends upon the operation to be performed. Possible values are ADD(1), SET(2)… |
| 1.3.6.1.4.1.429.4.91.1.5.1.8 | ColumnusrVirtualHAIPSecFlag | read-write | current | The Virtual HA IP Sec Flag |
| 1.3.6.1.4.1.429.4.91.1.6 | TableusrPhysicalHATable | not-accessible | current | Each list contains the Physica HA's |
| 1.3.6.1.4.1.429.4.91.1.6.1 | RowusrPhysicalHAEntry | not-accessible | current | The table of HA's |
| 1.3.6.1.4.1.429.4.91.1.6.1.1 | ColumnusrPhysicalHAIndexNum | read-only | current | The index to the HA Boot IP table |
| 1.3.6.1.4.1.429.4.91.1.6.1.2 | ColumnusrPhysicalHABootIP | read-only | current | The HA Boot IP |
| 1.3.6.1.4.1.429.4.91.1.6.1.4 | ColumnusrPhysicalHAIPSecFlag | read-only | current | The Physical HA IP Sec Flag |
| 1.3.6.1.4.1.429.4.91.1.7 | ScalarusrHACNRedundantBootIP | read-write | current | The Boot IP Address of the redundant HACN. |
| 1.3.6.1.4.1.429.4.91.1.8 | TableusrHACNHAStatsTable | not-accessible | current | Table of HACN-HA Statistics |
| 1.3.6.1.4.1.429.4.91.1.8.1 | RowusrHACNHAStatsEntryIndex | not-accessible | current | Index into the HACN-HA Statistics Table |
| 1.3.6.1.4.1.429.4.91.1.8.1.1 | ColumnusrHACNHAStatsIndexNum | read-only | current | The Index into the table |
| 1.3.6.1.4.1.429.4.91.1.8.1.2 | ColumnusrPhysicalHAIP | read-only | current | The Physical HA IP Address |
| 1.3.6.1.4.1.429.4.91.1.8.1.3 | ColumnusrVirtualHAIP | read-only | current | The Virtual HA IP Address |
| 1.3.6.1.4.1.429.4.91.1.8.1.4 | ColumnusrHARole | read-only | current | The HA Role |
| 1.3.6.1.4.1.429.4.91.1.8.1.5 | ColumnusrHAStatus | read-only | current | The HA Status |
| 1.3.6.1.4.1.429.4.91.1.8.1.6 | ColumnusrTotalNumReg | read-only | deprecated | The Total number of registration requests received by HACN which are forwarded to this HA. Note for Deprecated : In 3.0 HACN-HA release, HACN will not forward … |
| 1.3.6.1.4.1.429.4.91.1.8.1.7 | ColumnusrCurrentActiveCalls | read-only | current | The Current number of active calls (MBRs) stored on HACN for this HA |
| 1.3.6.1.4.1.429.4.91.1.8.1.8 | ColumnusrCurrentActiveCallsOnHA | read-only | current | The Current number of active calls on HA. This information is received by HACN in the Heartbeat message from HA. |
| 1.3.6.1.4.1.429.4.91.1.8.1.9 | ColumnusrHAIPSecFlag | read-only | current | The HA IP Sec Flag |
| 1.3.6.1.4.1.429.4.91.1.9 | ScalarusrTotalNumRegReq | read-only | deprecated | Total number of registration requests forwarded by HACN to all the HA's. Note for DEPRECATED: In 3.0 HACN-HA release, HACN will not forward any calls to the HA… |
| 1.3.6.1.4.1.429.4.91.1.10 | ScalarusrCurrNumRedundantHA | read-only | current | The current number of redundant HAs. |
| 1.3.6.1.4.1.429.4.91.1.11 | ScalarusrCurrNumOfActiveHA | read-only | current | The current number of active HAs. |
| 1.3.6.1.4.1.429.4.91.1.12 | ScalarusrTotalNumberOfHASwitchOvers | read-only | current | The total number of HA switchovers |
| 1.3.6.1.4.1.429.4.91.1.13 | ScalarusrTotalNumOfFailedSwitchOvers | read-only | current | The total number of failed switchovers |
| 1.3.6.1.4.1.429.4.91.1.14 | ScalarusrRedundantHACNStat | read-only | current | Status of the redundant HACN |
| 1.3.6.1.4.1.429.4.91.1.15 | ScalarusrHACNHAHeartBeatPeriod | read-write | current | The HACN HA Heartbeat Period |
| 1.3.6.1.4.1.429.4.91.1.16 | ScalarusrHACNRole | read-only | current | Role assumed by the HACN |
| 1.3.6.1.4.1.429.4.91.1.17 | ScalarusrHacnMobileRegDump | read-write | deprecated | Specifies if Mobile Registrations Dump is enabled on HACN. Note for DEPRECATED: In 3.0 HACN-HA release, HACN will not receive any reg request/reply, so this ob… |
| 1.3.6.1.4.1.429.4.91.1.18 | ScalarusrHACNHACNHeartBeatPeriod | read-only | current | The HACN HACN Heartbeat Period |
| 1.3.6.1.4.1.429.4.91.1.19 | TableusrHacnMbrTable | not-accessible | current | A table containing the HACN MBR List. The HACN updates this table in response to MBR update messages fron HAs. |
| 1.3.6.1.4.1.429.4.91.1.19.1 | RowusrHacnMbrEntry | not-accessible | current | An entry in the HACN MBR list. |
| 1.3.6.1.4.1.429.4.91.1.19.1.1 | ColumnusrHacnMbrIndex | read-only | current | Index of the entry in the HACN MBR Table. |
| 1.3.6.1.4.1.429.4.91.1.19.1.2 | ColumnusrHacnMbrHA | read-only | current | Home Agent IP address. |
| 1.3.6.1.4.1.429.4.91.1.19.1.3 | ColumnusrHacnMbrMN | read-only | current | Mobile node's home (IP) address. |
| 1.3.6.1.4.1.429.4.91.1.19.1.4 | ColumnusrHacnMbrCOA | read-only | current | Mobile node's care-of-address. One mobile node can have multiple bindings with different care-of-addresses. |
| 1.3.6.1.4.1.429.4.91.1.19.1.5 | ColumnusrHacnMbrRegFlags | read-only | current | Registration flags sent by mobile node. This is a bit-mapped value with the following represenentation: 7 6 5 4 3 2 1 0 +___+___+___+___+___+___+___+___+ | S |… |
| 1.3.6.1.4.1.429.4.91.1.19.1.6 | ColumnusrHacnMbrID1 | read-only | current | Low 32 bits of Identification used in that binding by the mobile node. |
| 1.3.6.1.4.1.429.4.91.1.19.1.7 | ColumnusrHacnMbrLifetime | read-only | current | The lifetime in seconds granted to the mobile node for this registraion. |
| 1.3.6.1.4.1.429.4.91.1.19.1.8 | ColumnusrHacnMbrNAI | read-only | current | User name ( NAI ). |
| 1.3.6.1.4.1.429.4.91.1.19.1.9 | ColumnusrHacnMbrNextHop | read-only | current | Next hop gateway address returned by AAA, used for VLAN tagging feature. |
| 1.3.6.1.4.1.429.4.91.1.20 | ScalarusrCurrNumOfNonIPSecActiveHA | read-only | current | The current number of Non IPSec Group Active HAs. |
| 1.3.6.1.4.1.429.4.91.1.21 | ScalarusrCurrNumOfIPSecActiveHA | read-only | current | The current number of IPSec Group Active HAs. |
| 1.3.6.1.4.1.429.4.91.1.22 | ScalarusrCurrNumNonIPSecRedundantHA | read-only | current | The current number of Non IPSec Redundant HAs. |
| 1.3.6.1.4.1.429.4.91.1.23 | ScalarusrCurrNumIPSecRedundantHA | read-only | current | The current number of IPSec Redundant HAs. |
| 1.3.6.1.4.1.429.4.91.1.24 | ScalarusrHACNHAMaxCallCapacity | read-write | current | HA Max Call Capacity assigned to it when HACN assigns it an Active Role. |
| 1.3.6.1.4.1.429.4.91.1.25 | ScalarusrCurrNumOfNonIPSecSoftbusyActiveHA | read-only | current | The current number of Non IPSec Group Softbusy Active HAs. The load information of these HAs will not be used in calculating the Average System Load and list o… |
| 1.3.6.1.4.1.429.4.91.1.26 | ScalarusrHACNHAMultipleLogins | read-write | current | HACN sends this setting to the all the HAs. This setting will override the individual HA setting. The setting indicates whether HA will allow Multiple Logins f… |
| 1.3.6.1.4.1.429.4.91.2 | NodeusrHACNCfmConfig | |||
| 1.3.6.1.4.1.429.4.91.2.1 | ScalarusrHACNConfigFileName | read-write | current | The name of the configuration file for HACN. If this value is empty, then the default file name is @file://HACNProcess.cfg. |
| 1.3.6.1.4.1.429.4.91.2.2 | ScalarusrHACNCfmStatus | read-write | current | The Configuration File Manager Flag for saving HACN configurable parameters. |
| 1.3.6.1.4.1.429.4.91.3 | NodeusrHACNLoadBalanceConfig | |||
| 1.3.6.1.4.1.429.4.91.3.1 | ScalarusrAverageSystemLoad | read-only | current | The Average Load on all Non IPSec Group In-service (Non-Softbusy) Active HAs in the System |
| 1.3.6.1.4.1.429.4.91.3.2 | ScalarusrLeastLoadedHA1 | read-only | current | The IP Address of Least Loaded HA #1 |
| 1.3.6.1.4.1.429.4.91.3.3 | ScalarusrCurrLoadOnHA1 | read-only | current | The Current Load on Least Loaded HA #1 |
| 1.3.6.1.4.1.429.4.91.3.4 | ScalarusrLeastLoadedHA2 | read-only | current | The IP Address of Least Loaded HA #2 |
| 1.3.6.1.4.1.429.4.91.3.5 | ScalarusrCurrLoadOnHA2 | read-only | current | The Current Load on Least Loaded HA #2 |
| 1.3.6.1.4.1.429.4.91.3.6 | ScalarusrLeastLoadedHA3 | read-only | current | The IP Address of Least Loaded HA #3 |
| 1.3.6.1.4.1.429.4.91.3.7 | ScalarusrCurrLoadOnHA3 | read-only | current | The Current Load on Least Loaded HA #3 |
| 1.3.6.1.4.1.429.4.91.3.8 | ScalarusrLeastLoadedHA4 | read-only | current | The IP Address of Least Loaded HA #4 |
| 1.3.6.1.4.1.429.4.91.3.9 | ScalarusrCurrLoadOnHA4 | read-only | current | The Current Load on Least Loaded HA #4 |
| 1.3.6.1.4.1.429.4.91.3.10 | ScalarusrTotalSystemLoad | read-only | current | The Total Load on all Non IPSec Group In-service (Non-Softbusy) Active HAs in the System |
| 1.3.6.1.4.1.429.4.91.3.11 | ScalarusrRemainderAvgSystemLoad | read-only | current | The Remainder load left after calculating Average System Load on all Non IPSec Group In-service (Non-Softbusy) Active HAs in the System |
| 1.3.6.1.4.1.429.4.91.3.12 | ScalarusrCurrNumOfNonIPSecInserviceActiveHA | read-only | current | The current number of Non IPSec Group In-service (Non-Softbusy) Active HAs. The load information of only these HAs will be used in calculating the Average Syst… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| IpxNetwork | OCTET STRING (SIZE(4)) |