USR-IP-ROUTING-MIB
94 objects
The commWorks enterprise defined MIB objects for IP routing process.
Imported Objects
| SNMPv2-SMI | Counter32 Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DisplayString |
| USR-DEFINITIONS-MIB | common UsrConfigStatus UsrNetLogicalId |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.429.4.19 | IdentityusrIpRouting | The commWorks enterprise defined MIB objects for IP routing process. | ||
| 1.3.6.1.4.1.429.4.19.1 | ScalarusrIpRouterId | read-write | current | the router id is usually the ip address of one of the router's lan interface ip address. this variable can only be set when usrIpAdminStatus is set to disabled. |
| 1.3.6.1.4.1.429.4.19.2 | ScalarusrIpAdminStatus | read-write | current | this variable is used to enable or disable the ip routing instance. |
| 1.3.6.1.4.1.429.4.19.3 | ScalarusrIpStaticProtoStatus | read-write | current | this variable is used to enable or disable static remote routes |
| 1.3.6.1.4.1.429.4.19.4 | ScalarusrIpASNumber | read-write | current | this is the autonomous system number used by egp, which can only be modified when usrIpAdminStatus is set to disabled. |
| 1.3.6.1.4.1.429.4.19.5 | ScalarusrIpRtabMaxAdmin | read-write | current | the max admin route table entries for next set. this is put in by rci for lightstream atm. it is not used by lanlinker or netserver. |
| 1.3.6.1.4.1.429.4.19.6 | ScalarusrIpRtabMax | read-only | current | this displays the maximum routing table size, this value can no longer be modified. The max size of the routing table is determined at compilation time, based … |
| 1.3.6.1.4.1.429.4.19.7 | ScalarusrIpNHEntryMax | read-write | current | this defines the maximum next hop entries, which can only be modified when usrIpAdminStatus is set to disabled. the default is 512 |
| 1.3.6.1.4.1.429.4.19.8 | ScalarusrIpRtEntryCount | read-only | current | this keeps the number of route entries. |
| 1.3.6.1.4.1.429.4.19.9 | ScalarusrIpGenStat | read-write | current | this variable denotes the existence of the ip routing instance, which can also be used to delete the routing instance. |
| 1.3.6.1.4.1.429.4.19.10 | ScalarusrIpRipGenStat | read-write | current | this mib variable is used to enable or disable the ip rip instance at the ip routing instance level. it is a no op if ip rip instance is not yet created. the r… |
| 1.3.6.1.4.1.429.4.19.11 | ScalarusrIpRipAdminStatus | read-write | current | this variable is used to create or delete the ip rip instance. |
| 1.3.6.1.4.1.429.4.19.12 | ScalarusrIpRipFlags | read-write | current | Several Flags are supported by this mib object, only RIP_FLAG_RFC1058_METRICS, RIP_FLAG_SEND_REQUEST are accessible. The only allowable values for setting are … |
| 1.3.6.1.4.1.429.4.19.13 | TableusrIpIfbTable | not-accessible | current | rci uses interface block to describe the system's network interface which is similar to pilgrim portal. |
| 1.3.6.1.4.1.429.4.19.13.1 | RowusrIpIfbEntry | not-accessible | current | an entry for one ip interface block. |
| 1.3.6.1.4.1.429.4.19.13.1.1 | ColumnusrIpIfbEntAddr | read-only | current | ip network interface address, i.e. host address |
| 1.3.6.1.4.1.429.4.19.13.1.2 | ColumnusrIpIfbEntIfIndex | read-only | current | the logical identifier of the ip network. |
| 1.3.6.1.4.1.429.4.19.13.1.3 | ColumnusrIpIfbEntIfHandle | read-only | current | don't know yet |
| 1.3.6.1.4.1.429.4.19.13.1.4 | ColumnusrIpIfbEntNetMask | read-only | current | the subnet mask associated w/ the ip address of this entry. |
| 1.3.6.1.4.1.429.4.19.13.1.5 | ColumnusrIpIfbEntOnesBc | read-only | current | the value of the least-significant bit in the ip broadcast address used for sending datagrams on the (logical) interface associated w/ the ip address of this e… |
| 1.3.6.1.4.1.429.4.19.13.1.6 | ColumnusrIpIfbEntZerosBc | not-accessible | current | the value of the least-significant bit in the ip broadcast address used for sending datagrams on the (logical) interface associated w/ the ip address of this e… |
| 1.3.6.1.4.1.429.4.19.13.1.7 | ColumnusrIpIfbEntReasmMaxSize | read-only | current | the size of the largest ip datagram which this entity can re-assemble from incoming ip fragmented datagrams received on this interface. it is usually equivalen… |
| 1.3.6.1.4.1.429.4.19.13.1.8 | ColumnusrIpIfbEntType | read-only | current | this denotes the ip network (logical) type. |
| 1.3.6.1.4.1.429.4.19.13.1.9 | ColumnusrIpIfbEntNbrAddr | read-write | current | this may be needed for point to point connection. |
| 1.3.6.1.4.1.429.4.19.13.1.10 | ColumnusrIpIfbEntAdminStatus | read-write | current | this variable is used to enable or disable this interface block |
| 1.3.6.1.4.1.429.4.19.13.1.11 | ColumnusrIpIfbEntStat | read-write | obsolete | this variable is used to create or delete an interface block. |
| 1.3.6.1.4.1.429.4.19.13.1.12 | ColumnusrIpIfbEntPortDown | read-write | obsolete | this variable is used to indicate the state of the hardware. |
| 1.3.6.1.4.1.429.4.19.14 | ScalarusrIpRipGenAdminStat | read-write | current | this variable is used to disable or enable the ip rip instance at the rip instance level. |
| 1.3.6.1.4.1.429.4.19.15 | ScalarusrIpRipGenIntfCnt | read-only | current | this variable shows the number of the ip rip interfaces. |
| 1.3.6.1.4.1.429.4.19.16 | ScalarusrIpRipGenNbrCnt | read-only | current | this variable shows the number of the rip neighbours. |
| 1.3.6.1.4.1.429.4.19.17 | ScalarusrIpRipGenJitter | read-write | current | this variable is used to enable or disable the rip packet jitter feature. |
| 1.3.6.1.4.1.429.4.19.18 | TableusrIpRipIfTable | not-accessible | current | rci uses interface block to describe the system's network interface which is similar to pilgrim portal. |
| 1.3.6.1.4.1.429.4.19.18.1 | RowusrIpRipIfEntry | not-accessible | current | an entry of rip interface block. |
| 1.3.6.1.4.1.429.4.19.18.1.1 | ColumnusrIpRipIfEntAddr | read-only | current | the interface ip address. |
| 1.3.6.1.4.1.429.4.19.18.1.2 | ColumnusrIpRipIfEntAddrLessIf | read-only | current | this column is used when the interface ip address is not specified. in general, it is equal to network id. |
| 1.3.6.1.4.1.429.4.19.18.1.3 | ColumnusrIpRipIfVersion | read-write | current | this variable tells what version of rip this interface is running. |
| 1.3.6.1.4.1.429.4.19.18.1.4 | ColumnusrIpRipIfType | read-write | current | this variable shows the interface type, i.e. broadcast, non-broadcast, point-to-point and undefined. |
| 1.3.6.1.4.1.429.4.19.18.1.5 | ColumnusrIpRipIfAdminStat | read-write | current | this variable shows whether the rip is enabled for this interface. |
| 1.3.6.1.4.1.429.4.19.18.1.6 | ColumnusrIpRipIfMetric | read-write | current | this variable is to define the metric for this interface. |
| 1.3.6.1.4.1.429.4.19.18.1.7 | ColumnusrIpRipIfSendDefault | read-write | current | this variable is to enable advertising the default route. |
| 1.3.6.1.4.1.429.4.19.18.1.8 | ColumnusrIpRipIfAcceptDefault | read-write | current | this variable is to enable accepting the default route. |
| 1.3.6.1.4.1.429.4.19.18.1.9 | ColumnusrIpRipIfSubnetsOnly | read-write | current | this variable is to enable this interface to advertise only subnet routes only. |
| 1.3.6.1.4.1.429.4.19.18.1.10 | ColumnusrIpRipIfSilent | read-write | current | this variable is to enable listen-only feature for this interface. |
| 1.3.6.1.4.1.429.4.19.18.1.11 | ColumnusrIpRipIfSplitHorizon | read-write | current | this variable is to enable split horizon. |
| 1.3.6.1.4.1.429.4.19.18.1.12 | ColumnusrIpRipIfPoison | read-write | current | this variable is to enable poison reverse. |
| 1.3.6.1.4.1.429.4.19.18.1.13 | ColumnusrIpRipIfFlash | read-write | current | this variable is to enable sending flash update. |
| 1.3.6.1.4.1.429.4.19.18.1.14 | ColumnusrIpRipIfDfltRouteMetric | read-write | current | this variable specifies the metric of the default route. |
| 1.3.6.1.4.1.429.4.19.18.1.15 | ColumnusrIpRipIfPortDown | read-only | current | this variable denotes the status of the physical port. |
| 1.3.6.1.4.1.429.4.19.18.1.16 | ColumnusrIpRipIfStat | read-write | current | this variable is to delete the rip interface. |
| 1.3.6.1.4.1.429.4.19.18.1.17 | ColumnusrIpRip2IfStatRcvBadPackets | read-only | current | ripv2 received bad packet counter. |
| 1.3.6.1.4.1.429.4.19.18.1.18 | ColumnusrIpRip2IfStatRcvBadRoutes | read-only | current | ripv2 received bad route counter. |
| 1.3.6.1.4.1.429.4.19.18.1.19 | ColumnusrIpRip2IfStatSendUpdates | read-only | current | ripv2 sent update packet counter. |
| 1.3.6.1.4.1.429.4.19.19 | TableusrIpRip2IfConfTable | not-accessible | current | table for ripv2 specific interface configuration information |
| 1.3.6.1.4.1.429.4.19.19.1 | RowusrIpRip2IfConfEntry | not-accessible | current | an entry of ripv2 interface configuration table. |
| 1.3.6.1.4.1.429.4.19.19.1.1 | Columnrip2IfConfAddress | read-only | current | the network interface address. |
| 1.3.6.1.4.1.429.4.19.19.1.2 | Columnrip2IfConfIndex | read-only | current | the network id. |
| 1.3.6.1.4.1.429.4.19.19.1.3 | Columnrip2IfConfDomain | not-accessible | obsolete | this thing is obsolete. |
| 1.3.6.1.4.1.429.4.19.19.1.4 | Columnrip2IfConfAuthType | read-write | current | this variable specifies the authentication type. md5 is not supported in this version yet. |
| 1.3.6.1.4.1.429.4.19.19.1.5 | Columnrip2IfConfAuthKey | read-write | current | the authentication key is defined here. |
| 1.3.6.1.4.1.429.4.19.19.1.6 | Columnrip2IfConfSend | read-write | current | this variable defines the send policy. |
| 1.3.6.1.4.1.429.4.19.19.1.7 | Columnrip2IfConfReceive | read-write | current | this variable defines the receive policy. |
| 1.3.6.1.4.1.429.4.19.19.1.8 | Columnrip2IfConfDefaultMetric | read-write | current | this variable defines the default metric of this network interface. |
| 1.3.6.1.4.1.429.4.19.19.1.9 | Columnrip2IfConfStatus | read-write | current | |
| 1.3.6.1.4.1.429.4.19.19.1.10 | Columnrip2IfConfSrcAddress | read-only | current | |
| 1.3.6.1.4.1.429.4.19.20 | ScalarusrIpDelRouteAll | read-write | current | This object is used to clear the whole routing table - setting this object with ANY value will do this. |
| 1.3.6.1.4.1.429.4.19.21 | ScalarusrIPRterBaseCfgFileName | read-write | current | The name of a ConfigFile to read/write permanent database records. If the value of this object is an empty string, then the SLIP process uses the default name … |
| 1.3.6.1.4.1.429.4.19.22 | ScalarusrIPRterBaseCFMSaveStatus | read-write | current | Setting the value of this object to `save' causes the values of the SLIP Base Group entries to be written out to the current SLIP config file. While the new co… |
| 1.3.6.1.4.1.429.4.19.23 | TableusrIpRTH | not-accessible | current | This entity's IP Routing table. |
| 1.3.6.1.4.1.429.4.19.23.1 | RowusrIpRTHEntry | not-accessible | current | A route to a particular destination. These routes are learned or written from the forwarder and so these objects are not accessible for SET via CLI or SNMP. Th… |
| 1.3.6.1.4.1.429.4.19.23.1.1 | ColumnusrIpRTHDest | read-write | current | The destination IP address of this route. An entry with a value of 0.0.0.0 is considered a default route. Multiple routes to a single destination can appear in… |
| 1.3.6.1.4.1.429.4.19.23.1.2 | ColumnusrIpRTHMask | read-write | current | Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the ipRTHDest field. For those systems that do not sup… |
| 1.3.6.1.4.1.429.4.19.23.1.3 | ColumnusrIpRTHProto | read-only | current | The routing mechanism via which this route was learned. Inclusion of values for gateway routing protocols is not intended to imply that hosts should support th… |
| 1.3.6.1.4.1.429.4.19.23.1.4 | ColumnusrIpRTHMetric | read-write | current | The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRTHProto value. If th… |
| 1.3.6.1.4.1.429.4.19.23.1.5 | ColumnusrIpRTHClass | read-write | current | The forward class is preference class associated with this route. There are 3 classes; the lower the class the more preferred the route. Local routes are in Cl… |
| 1.3.6.1.4.1.429.4.19.23.1.6 | ColumnusrIpRTHFwdFlags | read-write | current | Forward flags are hints to the forwarding engine as to what to do with the incoming packet. |
| 1.3.6.1.4.1.429.4.19.23.1.7 | ColumnusrIpRTHAge | read-write | current | The number of seconds since this route was last updated or otherwise determined to be correct. Note that no semantics of `too old' can be implied except throug… |
| 1.3.6.1.4.1.429.4.19.23.1.8 | ColumnusrIpRTHNhId | read-write | current | The index into the globally defined Next Hop Block. |
| 1.3.6.1.4.1.429.4.19.23.1.9 | ColumnusrIpRTHNextHop | read-write | current | The IP address of the next hop of this route. (In the case of a route bound to an interface which is realized via a broadcast media, the value of this field is… |
| 1.3.6.1.4.1.429.4.19.23.1.10 | ColumnusrIpRTHIfIndex | read-write | current | The index value which uniquely identifies the local interface through which the next hop of this route should be reached. The interface identified by a particu… |
| 1.3.6.1.4.1.429.4.19.24 | TableusrIpRTE | not-accessible | current | This entity's IP Routing table. |
| 1.3.6.1.4.1.429.4.19.24.1 | RowusrIpRTEEntry | not-accessible | current | A route to a particular destination. These routes are learned or written from the forwarder and so these objects are not accessible for SET via CLI or SNMP. Th… |
| 1.3.6.1.4.1.429.4.19.24.1.1 | ColumnusrIpRTEDest | read-write | current | The destination IP address of this route. An entry with a value of 0.0.0.0 is considered a default route. Multiple routes to a single destination can appear in… |
| 1.3.6.1.4.1.429.4.19.24.1.2 | ColumnusrIpRTEMask | read-write | current | Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the ipRTEDest field. For those systems that do not sup… |
| 1.3.6.1.4.1.429.4.19.24.1.3 | ColumnusrIpRTEProto | read-only | current | The routing mechanism via which this route was learned. Inclusion of values for gateway routing protocols is not intended to imply that hosts should support th… |
| 1.3.6.1.4.1.429.4.19.24.1.4 | ColumnusrIpRTEMetric | read-write | current | The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRTEProto value. If th… |
| 1.3.6.1.4.1.429.4.19.24.1.5 | ColumnusrIpRTEAge | read-write | current | The number of seconds since this route was last updated or otherwise determined to be correct. Note that no semantics of `too old' can be implied except throug… |
| 1.3.6.1.4.1.429.4.19.24.1.6 | ColumnusrIpRTEFwdFlags | read-write | current | Forward flags are hints to the forwarding engine as to what to do with the incoming packet. |
| 1.3.6.1.4.1.429.4.19.24.1.7 | ColumnusrIpRTEPref | read-write | current | The preference associated with this route after it has been added to the routing table. |
| 1.3.6.1.4.1.429.4.19.24.1.8 | ColumnusrIpRTENhId | read-write | current | The index into the globally defined Next Hop Block. |
| 1.3.6.1.4.1.429.4.19.24.1.9 | ColumnusrIpRTENextHop | read-write | current | The IP address of the next hop of this route. (In the case of a route bound to an interface which is realized via a broadcast media, the value of this field is… |
| 1.3.6.1.4.1.429.4.19.24.1.10 | ColumnusrIpRTEIfIndex | read-write | current | The index value which uniquely identifies the local interface through which the next hop of this route should be reached. The interface identified by a particu… |
| 1.3.6.1.4.1.429.4.19.26 | ScalarusrIpRipRXPacketCount | read-only | current | Number of IP RIP packets received. |
| 1.3.6.1.4.1.429.4.19.27 | ScalarusrIpRipTXPacketCount | read-only | current | Number of IP RIP packets transmitted. |
| 1.3.6.1.4.1.429.4.19.28 | ScalarusrIpRipIncorrectPacketCount | read-only | current | Number of incorrect IP RIP packets received. |