USR-MIP-MIB
142 objects
Added usrMipHaSendICMPforPMTUDiscovery
Imported Objects
| SNMPv2-SMI | Counter32 Gauge32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString RowStatus TruthValue |
| USR-DEFINITIONS-MIB | common UsrConfigStatus UsrSecretDisplay UsrSpecialU32 |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.429.4.82 | IdentityusrMIP | Added usrMipHaSendICMPforPMTUDiscovery | ||
| 1.3.6.1.4.1.429.4.82.1 | NodeusrMipHaConfig | |||
| 1.3.6.1.4.1.429.4.82.1.1 | ScalarusrMipHaMaxLifetime | read-write | current | The longest lifetime in seconds that the Home Agent is willing to accept in any Registration Request. |
| 1.3.6.1.4.1.429.4.82.1.2 | ScalarusrMipHaDomainName | read-write | obsolete | The HA domain name. OBSOLETE: This object is never used on HA. |
| 1.3.6.1.4.1.429.4.82.1.3 | ScalarusrMipHaDomainSpi | read-write | obsolete | The SPI is the 4-byte opaque index within the Mobility Security Association which selects the specific security parameters to be used to authenticate the peer.… |
| 1.3.6.1.4.1.429.4.82.1.4 | ScalarusrMipHaDomainKey | read-write | obsolete | The shared secret key for the security associations. Reading this object will always return zero length value. OBSOLETE: This object is never used on HA. |
| 1.3.6.1.4.1.429.4.82.1.5 | ScalarusrMipHaHacnAddress | read-write | current | Home Agent Control Node's RUN IP Address. |
| 1.3.6.1.4.1.429.4.82.1.6 | ScalarusrMipFaDomainSpi | read-write | obsolete | The SPI is the 4-byte opaque index within the Mobility Security Association which selects the specific security parameters to be used to authenticate the peer.… |
| 1.3.6.1.4.1.429.4.82.1.7 | ScalarusrMipFaDomainKey | read-write | obsolete | The shared secret key for the security associations. Reading this object will always return zero length value. OBSOLETE: This object is never used on HA. |
| 1.3.6.1.4.1.429.4.82.1.8 | ScalarusrMipHaTimeDrift | read-write | current | The value represents how close the timestamp, contained in the Identification information element of the Registration Request or the Registration Acknowledge m… |
| 1.3.6.1.4.1.429.4.82.1.9 | ScalarusrMipHaMaxTunnels | read-write | current | Maximum number of tunnels that can be established by this Home Agent. |
| 1.3.6.1.4.1.429.4.82.1.10 | ScalarusrMipHaHacnStatus | read-write | current | Specifies if the HACN Interface is available. When set for the first time all active HA tunnels will be deleted prior to initialization. Enabling an already ac… |
| 1.3.6.1.4.1.429.4.82.1.11 | ScalarusrMipHaMobileRegDump | read-write | deprecated | Specifies if the MIP debugging is enabled. DEPRECATED: The CLI command Set Mobile Reg_dump on/off removed. |
| 1.3.6.1.4.1.429.4.82.1.12 | TableusrMipHaMnSaTable | not-accessible | current | A table for configuring mobility security associations between mobile nodes and the Home Agent. |
| 1.3.6.1.4.1.429.4.82.1.12.1 | RowusrMipHaMnSaEntryIndex | not-accessible | current | An entry in the Home Agent Security Association Table. |
| 1.3.6.1.4.1.429.4.82.1.12.1.1 | ColumnusrMipHaMnSaIndexNum | read-only | current | Home Agent can support up to 1000 mobility security associations. |
| 1.3.6.1.4.1.429.4.82.1.12.1.2 | ColumnusrMipHaMnSaIndexSpi | read-write | current | The SPI is the 4-byte opaque index within the Mobility Security Association which selects the specific security parameters to be used to authenticate the peer. |
| 1.3.6.1.4.1.429.4.82.1.12.1.3 | ColumnusrMipHaMnSaIndexKey | read-write | current | The shared secret key for the security associations. |
| 1.3.6.1.4.1.429.4.82.1.12.1.4 | ColumnusrMipHaMnSaIndexStatus | read-write | current | This object is used to add, modify, and delete rows for the security association table. |
| 1.3.6.1.4.1.429.4.82.1.13 | ScalarusrMipHaTunIPToDel | read-write | current | Delete a tunnel specified by this IP address. |
| 1.3.6.1.4.1.429.4.82.1.14 | ScalarusrMipHaTunnelDeleteAll | read-write | current | When this flag is FALSE it indicates that HACN should not be updated with a delete MBR. This case will happen if the HACN interface is disabled on HA and re-en… |
| 1.3.6.1.4.1.429.4.82.1.15 | ScalarusrMipHaHacnSoftbusy | read-write | current | HA is softbusy or not. From 3.0 onwards it means that this HA will try to forward the Registration Request received by it and in case it can not find a HA to w… |
| 1.3.6.1.4.1.429.4.82.1.16 | ScalarusrMipHaHacnSecret | read-write | current | Secret shared between HA and HACN. |
| 1.3.6.1.4.1.429.4.82.1.17 | ScalarusrMipHaIdleTimer | read-write | current | The value represents the time interval when a process will be run to delete the MBRs for the MNs on which there have been no activity for certain time (which i… |
| 1.3.6.1.4.1.429.4.82.1.18 | ScalarusrMipHaIdleTimerStatus | read-write | current | Idle Timer Enabled or Disabled. The default is Disabled. Attempting to enable/disable the Idle TImer while any call is active will return an error. |
| 1.3.6.1.4.1.429.4.82.1.19 | ScalarusrMipHaMaxIdleTime | read-write | current | The value represents the time for the maximum idle time. If for this much time there is no activity (data transfer), then the MBR for this MN will be deleted. … |
| 1.3.6.1.4.1.429.4.82.1.20 | ScalarusrMipHaWAPCCStatus | read-write | current | Specifies if WAP Call Clearing is enabled. Enabling if already enabled has no action and no error is returned. Disabling this feature while any update message … |
| 1.3.6.1.4.1.429.4.82.1.21 | ScalarusrMipHaTunnelByAddr | read-write | obsolete | Display a tunnel specified by this IP address. OBSOLETE: This object is never used on HA. |
| 1.3.6.1.4.1.429.4.82.1.22 | ScalarusrMipHaStatsResetTime | read-write | current | Reading: Time the HA statistics counters were last reset. The HA statistics are valid from usrMipHAStatsResetTime until present. Resetting counters causes a di… |
| 1.3.6.1.4.1.429.4.82.1.23 | ScalarusrMipHaUsingBothPorts | read-write | current | Specifies if HA is using both ports. Port 1 (eth:1) will always be used for interfacing with PDSN/FA/HACN |
| 1.3.6.1.4.1.429.4.82.1.24 | ScalarusrMipHaTunDelByNAI | read-write | current | Delete tunnel(s) specified by this NAI. Reading this value returns NULL. |
| 1.3.6.1.4.1.429.4.82.1.25 | ScalarusrMipHaBroadcastBit | read-write | current | This flag specifies if HA should accept a registration request with B bit set in registration flags or not. By default this bit is set and HA will accept reg r… |
| 1.3.6.1.4.1.429.4.82.1.26 | ScalarusrMipHaNAICheck | read-write | current | Specifies if HA is checking NAI for re-registration requests or not. If it is enable then NAI is checked for each Re-Registration Requests otherwise NAI is not… |
| 1.3.6.1.4.1.429.4.82.1.27 | TableusrMipHaFaSaTable | not-accessible | current | A table for configuring FA security associations between PDSN/FA and the Home Agent. |
| 1.3.6.1.4.1.429.4.82.1.27.1 | RowusrMipHaFaSaEntryIndex | not-accessible | current | An entry in the FA-HA Security Association Table. |
| 1.3.6.1.4.1.429.4.82.1.27.1.1 | ColumnusrMipHaFaSaIndexNum | read-only | current | Home Agent can support up to 100 FA-HA security associations. |
| 1.3.6.1.4.1.429.4.82.1.27.1.2 | ColumnusrMipHaFaSaIpAddress | read-write | current | The IP address of PDSN/FA. |
| 1.3.6.1.4.1.429.4.82.1.27.1.3 | ColumnusrMipHaFaSaSpi | read-write | current | The SPI is the 4-byte opaque index within the FA-HA Security Association which selects the specific security parameters to be used to authenticate the peer. |
| 1.3.6.1.4.1.429.4.82.1.27.1.4 | ColumnusrMipHaFaSaKey | read-write | current | The shared secret key for the security associations. |
| 1.3.6.1.4.1.429.4.82.1.27.1.5 | ColumnusrMipHaFaSaStatus | read-write | current | This object is used to add, modify, and delete rows for the security association table. |
| 1.3.6.1.4.1.429.4.82.1.28 | ScalarusrMipHaStatusIPSec | read-write | current | Indicates this HA is IPSec enabled or not. If enabled then this HA will be used to service IPSec calls. In case HACN is present, this HA will accept only ipsec… |
| 1.3.6.1.4.1.429.4.82.1.29 | ScalarusrMipAuthenticationStyle | read-write | current | Indicates the authentication style on HA for registration requests. The HA can authenticate request according to RFC2002 standards or RFC2002bis standards. RFC… |
| 1.3.6.1.4.1.429.4.82.1.30 | ScalarusrMipMNHAKeyTransportScheme | read-write | current | Indicates the MN_HA Key Transport Scheme for access request to AAA. The radius attribute returned by AAA for MN-HA secret will depend upon the Key Transport Sc… |
| 1.3.6.1.4.1.429.4.82.1.31 | ScalarusrMipMNHAKeyPadding | read-write | current | Indicates whether HA has MN-HA Key padding enabled or disabled. If enabled, the key will be padded and if disabled the exact length of the key will be taken. P… |
| 1.3.6.1.4.1.429.4.82.1.32 | ScalarusrMipLoadBalancingStatus | read-write | current | Indicates whether HA will forward MIP Registration Requests to other HAs for Load Balancing or not. If enabled HA will do load balancing else it will not forwa… |
| 1.3.6.1.4.1.429.4.82.1.33 | ScalarusrMipHaGarpUponRereg | read-write | current | Indicates whether G-ARP upon MIP Re-Registration is enabled or disabled. If enabled, the HA will send G-ARP for the MN address for Re-Registration request else… |
| 1.3.6.1.4.1.429.4.82.1.34 | ScalarusrMipHaSendICMPforPMTUDiscovery | read-write | current | Indicates whether HA will send ICMP message when it receives a packet with size bigger than Tunnel MTU size for Path MTU Discovery. Note: The CLI description w… |
| 1.3.6.1.4.1.429.4.82.1.44 | ScalarusrMipMultipleLoginsStatus | read-write | current | Indicates whether HA will allow Multiple Logins for same user or not. |
| 1.3.6.1.4.1.429.4.82.2 | NodeusrMipHaStats | |||
| 1.3.6.1.4.1.429.4.82.2.1 | ScalarusrMipHaRegReqsIn | read-only | current | Total number of Registration Requests processed by the home agent. |
| 1.3.6.1.4.1.429.4.82.2.2 | ScalarusrMipHaRegAccptsSent | read-only | current | Total number of Registrations Requests accepted by the home agent (Code 0). |
| 1.3.6.1.4.1.429.4.82.2.3 | ScalarusrMipHaRegRejsSent | read-only | current | Total number Registration Requests denied by the home agent. |
| 1.3.6.1.4.1.429.4.82.2.4 | ScalarusrMipHaRegReqsDropped | read-only | current | Total number of Registration Requests that were discarded by the home agent. |
| 1.3.6.1.4.1.429.4.82.2.5 | ScalarusrMipHaMnAuthFailures | read-only | current | Total number of Registration Requests denied by the home agent - mobile node failed authentication (Code 131). |
| 1.3.6.1.4.1.429.4.82.2.6 | ScalarusrMipHaFaAuthFailures | read-only | current | Total number of Registration Requests denied by the home agent - foreign agent failed authentication (Code 132). |
| 1.3.6.1.4.1.429.4.82.2.7 | ScalarusrMipHaRegsMalformedIn | read-only | current | Total number of Registration Requests denied by the home agent - poorly formed request (Code 134.) |
| 1.3.6.1.4.1.429.4.82.2.8 | ScalarusrMipHaRegReqsBadHaIn | read-only | current | Total number of Registration Requests denied by the home agent - unknown home agent address (Code 136.) |
| 1.3.6.1.4.1.429.4.82.2.9 | ScalarusrMipHaTimeCheckFailures | read-only | current | Total number of Time Check Failures. |
| 1.3.6.1.4.1.429.4.82.2.10 | ScalarusrMipHaNAICheckFailures | read-only | current | Total number of NAI Check Failures. |
| 1.3.6.1.4.1.429.4.82.2.11 | ScalarusrMipHaInsuffResources | read-only | current | Total number of Registration Requests denied by the home agent - insufficient resources (Code 130.) |
| 1.3.6.1.4.1.429.4.82.2.12 | ScalarusrMipHaLifetimeDiscs | read-only | current | Total number of home agent initiated disconnects due to Lifetime expiry event. |
| 1.3.6.1.4.1.429.4.82.2.13 | ScalarusrMipHaDeregDiscs | read-only | current | Total number of Registration Requests received by the home agent with a Lifetime of zero (requests to deregister). |
| 1.3.6.1.4.1.429.4.82.2.14 | ScalarusrMipHaManualDiscs | read-only | current | Total number of manual disconnects initiated by this home agent. |
| 1.3.6.1.4.1.429.4.82.2.15 | ScalarusrMipHaTotalSessions | read-only | current | Total number of sessions handled by this home agent. |
| 1.3.6.1.4.1.429.4.82.2.16 | ScalarusrMipHaCurrentSessions | read-only | current | Current number of active sessions. |
| 1.3.6.1.4.1.429.4.82.2.17 | ScalarusrMipHaUnsupEncapFailures | read-only | deprecated | Total number of Registration Requests denied by the home agent - Unsupported Encapsulation (Code 139.) DEPRECATED: HA does not report this error code any more.… |
| 1.3.6.1.4.1.429.4.82.2.18 | TableusrMipHaMobilityBindingTable | not-accessible | current | A table containing the home agent's mobility binding list. The home agent updates this table in response to registration events from mobile nodes. |
| 1.3.6.1.4.1.429.4.82.2.18.1 | RowusrMipHaMobilityBindingEntry | not-accessible | current | An entry in the mobility binding list. |
| 1.3.6.1.4.1.429.4.82.2.18.1.1 | ColumnusrMipHaMobilityBindingIndex | read-only | current | Index of the entry in the Mobility Binding Table. |
| 1.3.6.1.4.1.429.4.82.2.18.1.2 | ColumnusrMipHaMobilityBindingMN | read-only | current | Mobile node's home (IP) address. |
| 1.3.6.1.4.1.429.4.82.2.18.1.3 | ColumnusrMipHaMobilityBindingCOA | read-only | current | Mobile node's care-of-address. One mobile node can have multiple bindings with different care-of-addresses. |
| 1.3.6.1.4.1.429.4.82.2.18.1.4 | ColumnusrMipHaMobilityBindingRegFlags | read-only | current | Registration flags sent by mobile node. This is a bit-mapped value with the following representation: 7 6 5 4 3 2 1 0 + | S | B | D | M | G | V | T | R | + whe… |
| 1.3.6.1.4.1.429.4.82.2.18.1.5 | ColumnusrMipHaMobilityBindingRegIDLow | read-only | current | Low 32 bits of Identification used in that binding by the mobile node. |
| 1.3.6.1.4.1.429.4.82.2.18.1.6 | ColumnusrMipHaMobilityBindingRegIDHigh | read-only | current | High 32 bits of Identification used in that binding by the mobile node. |
| 1.3.6.1.4.1.429.4.82.2.18.1.7 | ColumnusrMipHaMobilityBindingTimeGranted | read-only | current | The lifetime in seconds granted to the mobile node for this registration. |
| 1.3.6.1.4.1.429.4.82.2.18.1.8 | ColumnusrMipHaMobilityBindingTimeRemaining | read-only | current | The number of seconds remaining until the registration is expired. It has the same initial value as usrMipHaMobilityBindingTimeGranted, and is counted down by … |
| 1.3.6.1.4.1.429.4.82.2.18.1.9 | ColumnusrMipHaMobilityBindingMtu | read-only | current | The size of the MTU. |
| 1.3.6.1.4.1.429.4.82.2.18.1.10 | ColumnusrMipHaMobilityBindingNAI | read-only | current | User name ( NAI ). |
| 1.3.6.1.4.1.429.4.82.2.18.1.11 | ColumnusrMipHaMobilitySetupTime | read-only | current | Actual time when the tunnel was setup on this HA. Time is in NTP format. |
| 1.3.6.1.4.1.429.4.82.2.18.1.14 | ColumnusrMipHaMobilityBindingNextHop | read-only | current | Next hop gateway address returned by AAA, used for VLAN tagging feature. |
| 1.3.6.1.4.1.429.4.82.2.19 | ScalarusrMipHaTotalSessionReleased | read-only | current | Total number of Registration Requests denied by the home agent - Unsupported Encapsulation (Code 139.) |
| 1.3.6.1.4.1.429.4.82.2.20 | ScalarusrMipHaNewRegReqRcvd | read-only | current | Total number of new Registration Requests received by the home agent. |
| 1.3.6.1.4.1.429.4.82.2.21 | ScalarusrMipHaNewRegReqAccepted | read-only | current | Total number of new Registration Requests accepted by the home agent. |
| 1.3.6.1.4.1.429.4.82.2.22 | ScalarusrMipHaNewRegReqRejected | read-only | current | Total number of new Registration Requests rejected by the home agent. |
| 1.3.6.1.4.1.429.4.82.2.23 | ScalarusrMipHaReRegReqRcvd | read-only | current | Total number of Re-Registration Requests received by the home agent. |
| 1.3.6.1.4.1.429.4.82.2.24 | ScalarusrMipHaReRegReqAccepted | read-only | current | Total number of Re-Registration Requests accepted by the home agent. |
| 1.3.6.1.4.1.429.4.82.2.25 | ScalarusrMipHaReRegReqRejected | read-only | current | Total number of Re-Registration Requests rejected by the home agent. |
| 1.3.6.1.4.1.429.4.82.2.26 | ScalarusrMipHaDeRegReqRcvd | read-only | current | Total number of De-Registration Requests received by the home agent. |
| 1.3.6.1.4.1.429.4.82.2.27 | ScalarusrMipHaDeRegReqAccepted | read-only | current | Total number of De-Registration Requests accepted by the home agent. |
| 1.3.6.1.4.1.429.4.82.2.28 | ScalarusrMipHaDeRegReqRejected | read-only | current | Total number of De-Registration Requests rejected by the home agent. |
| 1.3.6.1.4.1.429.4.82.2.29 | ScalarusrMipHaAdminProhibited | read-only | current | Total number of Registration Requests rejected by the home agent with error code 129 |
| 1.3.6.1.4.1.429.4.82.2.30 | ScalarusrMipHaRegReqForwarded | read-only | current | Total number of Registration Requests forwarded by the home agent. |
| 1.3.6.1.4.1.429.4.82.2.31 | ScalarusrMipHaForwardedRegReq | read-only | current | Total number of forwarded Registration Requests received by the home agent. |
| 1.3.6.1.4.1.429.4.82.2.32 | ScalarusrMipHaDuplicateIPDiscs | read-only | current | Total number of disconnects due to duplicate IP address. This can happen when an MBR already exists with the same address as as assigned to MN. |
| 1.3.6.1.4.1.429.4.82.2.39 | ScalarusrMipHaDuplicateNaiDiscs | read-only | current | Total number of disconnects due to duplicate NAI. This can happen when Multiple Logins is disabled and an MBR already exists with the same NAI. |
| 1.3.6.1.4.1.429.4.82.2.40 | ScalarusrMipHaClearMBRDiscs | read-only | current | Total number of disconnects due to Clear MBR message received from HACN. This can happen in two scenarios, first when HACN detects Duplicate MN IP, it sends Cl… |
| 1.3.6.1.4.1.429.4.82.3 | NodeusrMipHaCfmConfig | |||
| 1.3.6.1.4.1.429.4.82.3.1 | ScalarusrMipHaConfigFileName | read-write | current | The name of the configuration file for HA MIP. If this value is empty, then the default file name is @file://MipHandler.cfg. |
| 1.3.6.1.4.1.429.4.82.3.2 | ScalarusrMipHaCfmStatus | read-write | current | The Configuration File Manager Flag for saving Home Agent MIP configurable parameters. |
| 1.3.6.1.4.1.429.4.82.4 | NodeusrMipHaTrapsSettings | |||
| 1.3.6.1.4.1.429.4.82.4.1 | ScalarusrMipHaUpperThreshold | read-write | current | Specifies the upper Water Mark for Active Session Threshold. If the active call capacity exceeds this limit, then a trap is sent. |
| 1.3.6.1.4.1.429.4.82.4.2 | ScalarusrMipHaLowerThreshold | read-write | current | Specifies the lower Water Mark for Active Session Threshold. If the active call capacity touches this lower threshold after touching the Upper threshold, then … |
| 1.3.6.1.4.1.429.4.82.4.3 | ScalarusrMipHaTrapThreshold | read-write | current | Threshold Trap Enabled or Disabled. |
| 1.3.6.1.4.1.429.4.82.4.4 | ScalarusrMipHaTrapIdleTimer | read-write | current | Idle Timer Trap Enabled or Disabled. |
| 1.3.6.1.4.1.429.4.82.5 | NodeusrMipHaTraps | |||
| 1.3.6.1.4.1.429.4.82.5.0 | IdentityusrMipHaTrapsV2 | current | The Traps for MIP | |
| 1.3.6.1.4.1.429.4.82.5.0.1 | NotificationusrMipHaActiveSessionThresholdReached | current | This trap is generated when Active Session Threshold is reached based on the calculation - (ActiveSessions * 100) / MaxTunnels being greater than the UpperThre… | |
| 1.3.6.1.4.1.429.4.82.5.0.2 | NotificationusrMipHaIdleTimerExpired | current | This trap is generated when the Idle Timer has expired and the tunnel has been disconnected. The trap contains the MobileNode's home IP address. | |
| 1.3.6.1.4.1.429.4.82.6 | NodeusrMipHaStatus | |||
| 1.3.6.1.4.1.429.4.82.6.1 | ScalarusrMipHaStatusHacnInterfaceStatus | read-only | current | HACN Interface status |
| 1.3.6.1.4.1.429.4.82.6.2 | ScalarusrMipHaStatusHaRole | read-only | current | HA Role. This makes sense only if HACN interface is enabled. If HACN interface is not enabled, then HA role will be unassigned. |
| 1.3.6.1.4.1.429.4.82.6.3 | ScalarusrMipHaStatus2EthPortStatus | read-only | current | Status of second ethernet port. If both port are in use and second ethernet port goes down then HA stops accepting reg req. |
| 1.3.6.1.4.1.429.4.82.6.4 | ScalarusrMipHaStatusHaRunIp | read-only | deprecated | Home Agent RUN IP Address. DEPRECATED: This object has been replaced by usrMipHacnSettingsHaRunIp |
| 1.3.6.1.4.1.429.4.82.6.5 | ScalarusrMipHaStatusHacnResponding | read-only | current | This indicates whether HACN is responding to heartbeats or not. |
| 1.3.6.1.4.1.429.4.82.6.6 | ScalarusrMipHaRunIPNetworkStatus | read-write | current | HA RunIP Network added on HA Enabled or Disabled. If the HA role is not active then no action, enabled or disabled, is allowed; an error will be returned. An e… |
| 1.3.6.1.4.1.429.4.82.7 | NodeusrMipHaMobileInfo | |||
| 1.3.6.1.4.1.429.4.82.7.1 | TableusrMobileInfoTable | not-accessible | current | A table containing Mobile Node Information. |
| 1.3.6.1.4.1.429.4.82.7.1.1 | RowusrMobileInfoEntry | not-accessible | current | An entry in the Mobile Node Information list. |
| 1.3.6.1.4.1.429.4.82.7.1.1.1 | ColumnusrMipHaMobilePacketOut | read-only | current | Number of packets sent out on the tunnel. |
| 1.3.6.1.4.1.429.4.82.7.1.1.2 | ColumnusrMipHaMobilePacketIn | read-only | current | Number of packets received from the tunnel. |
| 1.3.6.1.4.1.429.4.82.7.1.1.3 | ColumnusrMipHaMobileByteOut | read-only | current | Number of data bytes sent out on the tunnel. |
| 1.3.6.1.4.1.429.4.82.7.1.1.4 | ColumnusrMipHaMobileByteIn | read-only | current | Number of data bytes received from the tunnel. |
| 1.3.6.1.4.1.429.4.82.8 | NodeusrMipHaLoadInfo | |||
| 1.3.6.1.4.1.429.4.82.8.1 | ScalarusrMipHaLoadInfoSystemLoad | read-only | current | This specifies the average load on the system. This is calculated by HACN and distributed to all the HAs in the heartbeat ack message. |
| 1.3.6.1.4.1.429.4.82.8.2 | ScalarusrMipHaLoadInfoLLHA1 | read-only | current | IP address of the least loaded HA 1 in the system. This information is passed by HACN. |
| 1.3.6.1.4.1.429.4.82.8.3 | ScalarusrMipHaLoadInfoLLHA2 | read-only | current | IP address of the least loaded HA 2 in the system. This information is passed by HACN. |
| 1.3.6.1.4.1.429.4.82.8.4 | ScalarusrMipHaLoadInfoLLHA3 | read-only | current | IP address of the least loaded HA 3 in the system. This information is passed by HACN. |
| 1.3.6.1.4.1.429.4.82.8.5 | ScalarusrMipHaLoadInfoLLHA4 | read-only | current | IP address of the least loaded HA 4 in the system. This information is passed by HACN. |
| 1.3.6.1.4.1.429.4.82.8.6 | ScalarusrMipHaLoadInfoLoadHA1 | read-only | current | Current load of least loaded HA1. |
| 1.3.6.1.4.1.429.4.82.8.7 | ScalarusrMipHaLoadInfoLoadHA2 | read-only | current | Current load of least loaded HA2. |
| 1.3.6.1.4.1.429.4.82.8.8 | ScalarusrMipHaLoadInfoLoadHA3 | read-only | current | Current load of least loaded HA3. |
| 1.3.6.1.4.1.429.4.82.8.9 | ScalarusrMipHaLoadInfoLoadHA4 | read-only | current | Current load of least loaded HA4. |
| 1.3.6.1.4.1.429.4.82.9 | NodeusrMipHacnSettings | |||
| 1.3.6.1.4.1.429.4.82.9.1 | ScalarusrMipHacnSettingsHaRunIp | read-only | current | Home Agent RUN IP Address. |
| 1.3.6.1.4.1.429.4.82.9.2 | ScalarusrMipHacnSettingsHeartbeatPeriod | read-only | current | Heartbeat period set by HACN. This value is set in HACN and is sent to HA during Role Assignment and in each Heartbeat ACK. This is the time period after which… |
| 1.3.6.1.4.1.429.4.82.9.3 | ScalarusrMipHacnSettingsPacketRetryPeriod | read-only | current | Packet Retry period set by HACN. This value is set in HACN and is sent to HA during Role Assignment and in each Heartbeat ACK. This is the time period after wh… |
| 1.3.6.1.4.1.429.4.82.9.4 | ScalarusrMipHacnSettingsPacketRetryCount | read-only | current | Packet Retry count set by HACN. This value is set in HACN and is sent to HA during Role Assignment and in each Heartbeat ACK. This is the number of times a ret… |
| 1.3.6.1.4.1.429.4.82.10 | NodeusrMipHacnStats | |||
| 1.3.6.1.4.1.429.4.82.10.1 | ScalarusrMipHacnStatsHeartbeatSent | read-only | current | Total Number of heartbeats sent to HACN. |
| 1.3.6.1.4.1.429.4.82.10.2 | ScalarusrMipHacnStatsHeartbeatAckRcvd | read-only | current | Total Number of heartbeat ack received from HACN. |
| 1.3.6.1.4.1.429.4.82.10.3 | ScalarusrMipHacnStatsHeartbeatRetried | read-only | current | Total Number of heartbeats retried. |
| 1.3.6.1.4.1.429.4.82.10.4 | ScalarusrMipHacnStatsResetTime | read-write | current | Reading: Time the HACN statistics counters were last reset. The HACN statistics are valid from usrMipHacnStatsResetTime until present. Resetting counters cause… |