USR-NTP-MIB
56 objects
This MIB Module defines the CommWorks private interface to the Simple Network Time Protocol client process. The process can be configured with up to two alternate servers, a primary server and a secondary server. The primary server is always contacted first, the secondary server is contacted after all retransmissions to the primary failed have failed. The implementation is based on RFC 2030, using unicast mode only. Note that all the writable objects include a 'DEFVAL' clause. The clause is intended to be used as a reference only, in case an agent has no previously saved configuration. Typically, at start-up, an agent will load data saved from a previous session - thus 'DEFVAL' is used mainly for new systems.
Imported Objects
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DisplayString |
| USR-DEFINITIONS-MIB | common UsrConfigStatus UsrDisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.429.4.34 | IdentityusrNTPMib | This MIB Module defines the CommWorks private interface to the Simple Network Time Protocol client process. The process can be configured with up to two altern… | ||
| 1.3.6.1.4.1.429.4.34.1 | NodeusrNTPObjects | |||
| 1.3.6.1.4.1.429.4.34.1.1 | ScalarusrNTPPrimaryServer | read-write | current | The IP address or host name of the primary NTP server that the module will query for time synchronization. An empty string means that no primary server is defi… |
| 1.3.6.1.4.1.429.4.34.1.2 | ScalarusrNTPSecondaryServer | read-write | current | The IP address or host name of the secondary NTP server that the module will query for time synchronization whenever the primary server is unavailable. An empt… |
| 1.3.6.1.4.1.429.4.34.1.3 | ScalarusrNTPPollingInterval | read-write | current | The polling interval used by the NTP process to gather time synchronization information. In seconds. The range available is 64 seconds to 1024 seconds. The def… |
| 1.3.6.1.4.1.429.4.34.1.4 | ScalarusrNTPMaxRetransmits | read-write | current | The maximum number of times a request will be retransmitted to a given server before the server is considered unavailable. The range allowed is 1 to 200 times.… |
| 1.3.6.1.4.1.429.4.34.1.5 | ScalarusrNTPTimeOut | read-write | current | The number of seconds since a request has been sent to a server, after which period the request is considered timed-out. The range for this is 1 second to 1 mi… |
| 1.3.6.1.4.1.429.4.34.1.6 | ScalarusrNTPEnable | read-write | current | This object enables or disables NTP synchronization in a system. Default is disabled. |
| 1.3.6.1.4.1.429.4.34.1.7 | ScalarusrNTPProtocolVersion | read-write | current | The protocol version that the NTP client will use when sending NTP client requests to a server. |
| 1.3.6.1.4.1.429.4.34.1.8 | ScalarusrNTPCfmFileName | read-only | current | The name of the configuration file currently in use. |
| 1.3.6.1.4.1.429.4.34.1.9 | ScalarusrNTPCfmSaveFlag | read-write | current | Setting the value of this object to `save' causes the values of the NTP Group to be written out to the current config file, which is stored in the usrNTPCfmFil… |
| 1.3.6.1.4.1.429.4.34.1.10 | ScalarusrNTPModuleVersion | read-only | current | The current software version of the NTP module. |
| 1.3.6.1.4.1.429.4.34.1.11 | ScalarusrNTPLastGoodServer | read-only | current | The symbolic host name of the last server from which time synchronization information was received (if there was a numeric address defined, this will be a nume… |
| 1.3.6.1.4.1.429.4.34.1.12 | ScalarusrNTPRcvdDatagrams | read-only | current | Number of datagrams received at the port on which NTP is listening to. |
| 1.3.6.1.4.1.429.4.34.1.13 | ScalarusrNTPRcvdTooShorts | read-only | current | Number of datagrams received which were too short for NTP version four. |
| 1.3.6.1.4.1.429.4.34.1.14 | ScalarusrNTPRcvdBadVersions | read-only | current | Number of datagrams received with a wrong NTP version. |
| 1.3.6.1.4.1.429.4.34.1.15 | ScalarusrNTPRcvdRequests | read-only | current | Number of NTP requests received. |
| 1.3.6.1.4.1.429.4.34.1.16 | ScalarusrNTPRcvdReplies | read-only | current | Number of NTP replies received. |
| 1.3.6.1.4.1.429.4.34.1.17 | ScalarusrNTPRcvdUnsuportedModes | read-only | current | Number of NTP datagrams received which had a mode value not supported by this entity. |
| 1.3.6.1.4.1.429.4.34.1.18 | ScalarusrNTPSentRequests | read-only | current | Number of NTP requests sent. |
| 1.3.6.1.4.1.429.4.34.1.19 | ScalarusrNTPSentReplies | read-only | current | Number of NTP replies sent since the system was last rebooted. |
| 1.3.6.1.4.1.429.4.34.1.20 | ScalarusrNTPSentRexmits | read-only | current | Number of NTP requests that were retransmitted due to lack of a timely reply. |
| 1.3.6.1.4.1.429.4.34.1.21 | ScalarusrNTPSendErrors | read-only | current | Number of NTP requests that could not be sent due to internal errors. |
| 1.3.6.1.4.1.429.4.34.1.22 | ScalarusrNTPDnsErrors | read-only | current | Number of times an error was returned by DNS when processing a name resolution request from the NTP module. |
| 1.3.6.1.4.1.429.4.34.1.23 | ScalarusrNTPServerTimeouts | read-only | current | Number of times a server was considered unavailable after requests were sent to it a maximum number of retransmissions without a reply. |
| 1.3.6.1.4.1.429.4.34.1.24 | ScalarusrNTPAllocErrors | read-only | current | Number of times an operation could not be performed due to a failure to allocate memory resources. |
| 1.3.6.1.4.1.429.4.34.1.25 | ScalarusrNTPResolvedIPAddress | read-only | current | The IP address resolved from the 'current' server with which synchronization is being attempted. If there is no resolution, or there is no current server defin… |
| 1.3.6.1.4.1.429.4.34.1.26 | ScalarusrNTPLastRcvdLeapIndicator | read-only | current | The value of the last received Leap Indicator field. |
| 1.3.6.1.4.1.429.4.34.1.27 | ScalarusrNTPLastRcvdMode | read-only | current | The value of the last received Mode field. |
| 1.3.6.1.4.1.429.4.34.1.28 | ScalarusrNTPLastRcvdStratum | read-only | current | The value of the last received Stratum field. |
| 1.3.6.1.4.1.429.4.34.1.29 | ScalarusrNTPLastRcvdPoll | read-only | current | The value of the last received Poll field. |
| 1.3.6.1.4.1.429.4.34.1.30 | ScalarusrNTPLastRcvdPrecision | read-only | current | The value of the last received Precision field. |
| 1.3.6.1.4.1.429.4.34.1.31 | ScalarusrNTPLastRcvdRootDelay | read-only | current | The value of the last received Root Delay field. |
| 1.3.6.1.4.1.429.4.34.1.32 | ScalarusrNTPLastRcvdRootDispersion | read-only | current | The value of the last received Root Dispersion field. |
| 1.3.6.1.4.1.429.4.34.1.33 | ScalarusrNTPLastRcvdReferenceIdentifier | read-only | current | The value of the last received Reference Identifier field. |
| 1.3.6.1.4.1.429.4.34.1.34 | ScalarusrNTPLastRcvdReferenceTimestampHigh | read-only | current | The value of the last received Reference Timestamp field (high octets). |
| 1.3.6.1.4.1.429.4.34.1.35 | ScalarusrNTPLastRcvdReferenceTimestampLow | read-only | current | The value of the last received Reference Timestamp field (low octets). |
| 1.3.6.1.4.1.429.4.34.1.36 | ScalarusrNTPLastRcvdOriginateTimestampHigh | read-only | current | The value of the last received Originate Timestamp field (high octets). |
| 1.3.6.1.4.1.429.4.34.1.37 | ScalarusrNTPLastRcvdOriginateTimestampLow | read-only | current | The value of the last received Originate Timestamp field (low octets). |
| 1.3.6.1.4.1.429.4.34.1.38 | ScalarusrNTPLastRcvdReceiveTimestampHigh | read-only | current | The value of the last received Receive Timestamp field (high octets). |
| 1.3.6.1.4.1.429.4.34.1.39 | ScalarusrNTPLastRcvdReceiveTimestampLow | read-only | current | The value of the last received Receive Timestamp field (low octets). |
| 1.3.6.1.4.1.429.4.34.1.40 | ScalarusrNTPLastRcvdTransmitTimestampHigh | read-only | current | The value of the last received Transmit Timestamp field (high octets). |
| 1.3.6.1.4.1.429.4.34.1.41 | ScalarusrNTPLastRcvdTransmitTimestampLow | read-only | current | The value of the last received Transmit Timestamp field (low octets). |
| 1.3.6.1.4.1.429.4.34.1.42 | ScalarusrNTPTimeZone | read-write | current | Timezone variables; should be one of the following, Egypt, Libya, PRC, ROC, Hongkong, Iran, Israel, Japan, ROK, Singapore, Australia/Tasmania, Australia/Queens… |
| 1.3.6.1.4.1.429.4.34.1.43 | TableusrNTPTimeZoneTable | not-accessible | current | |
| 1.3.6.1.4.1.429.4.34.1.43.1 | RowtimeZoneEntry | not-accessible | current | |
| 1.3.6.1.4.1.429.4.34.1.43.1.1 | ColumnusrNTPIndex | not-accessible | current | The key field |
| 1.3.6.1.4.1.429.4.34.1.43.1.2 | ColumnusrNTPNextTimeZone | read-only | current | Time zone list name |
| 1.3.6.1.4.1.429.4.34.2 | NodeusrNTPConformance | |||
| 1.3.6.1.4.1.429.4.34.2.1 | NodeusrNTPCompliances | |||
| 1.3.6.1.4.1.429.4.34.2.1.1 | ComplianceusrNTPCompliance | current | The compliance statement for entities which implement the MIB. | |
| 1.3.6.1.4.1.429.4.34.2.2 | NodeusrNTPGroups | |||
| 1.3.6.1.4.1.429.4.34.2.2.1 | GroupusrNTPGroup | current | All objects in this MIB. | |
| 1.3.6.1.4.1.429.4.34.3 | NodeusrNTPTraps | |||
| 1.3.6.1.4.1.429.4.34.3.0 | IdentityusrNTPTrapsV2 | current | Events for NTP | |
| 1.3.6.1.4.1.429.4.34.3.0.1 | NotificationusrNTPServerFailure | current | This trap is generated for NTP Server connectivity failure. |