UX25-MIB
216 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.429 | Nodeusr | |||
| 1.3.6.1.4.1.429.1 | Nodenas | |||
| 1.3.6.1.4.1.429.1.10 | Nodeux25 | |||
| 1.3.6.1.4.1.429.1.10.1 | Tableux25AdmnChannelTable | not-accessible | mandatory | Defines objects for the parameters of an X.25 interface which the administrator can read and set. |
| 1.3.6.1.4.1.429.1.10.1.1 | Rowux25AdmnChannelEntry | not-accessible | mandatory | Entries of ux25AdmnChannelTable. |
| 1.3.6.1.4.1.429.1.10.1.1.1 | Columnux25AdmnChanneIndex | read-only | mandatory | A unique value for each X.25 subnetwork entity in the chassis. The value of this object matches the value of the index of the corresponding X.25 subnetwork ent… |
| 1.3.6.1.4.1.429.1.10.1.1.2 | Columnux25AdmnNetMode | read-write | mandatory | Selects the network protocol to be used. Default=x2584(3). |
| 1.3.6.1.4.1.429.1.10.1.1.3 | Columnux25AdmnProtocolVersion | read-write | mandatory | Determines the X.25 protocol version being used on the network. A network mode of X25_LLC overides this field to the 1984 standard. Default=x25ver84(3). |
| 1.3.6.1.4.1.429.1.10.1.1.4 | Columnux25AdmnInterfaceMode | read-write | mandatory | Indicates the DTE/DCE nature of the link. The DXE parameter is resolved using ISO 8208 for DTE-DTE operation. Default=dteMode(2). |
| 1.3.6.1.4.1.429.1.10.1.1.5 | Columnux25AdmnLowestPVCVal | read-write | mandatory | Low end of the Permanent Virtual Circuit range. If both the Low and High ends of the range are set to 0 there are no PVCs. Default=0. |
| 1.3.6.1.4.1.429.1.10.1.1.6 | Columnux25AdmnHighestPVCVal | read-write | mandatory | High end of the Permanent Virtual Circuit range. If both the Low and High ends of the range are set to 0 there are no PVCs. Default=0. |
| 1.3.6.1.4.1.429.1.10.1.1.7 | Columnux25AdmnChannelLIC | read-write | mandatory | Low end of the one-way incoming logical channel. If both Low and High ends of the channel are set to 0, there are no one-way incoming channels. Default=0. |
| 1.3.6.1.4.1.429.1.10.1.1.8 | Columnux25AdmnChannelHIC | read-write | mandatory | High end of the one-way incoming logical channel. If both Low and High ends of the channel are set to 0, there are no one-way incoming channels. Default=0. |
| 1.3.6.1.4.1.429.1.10.1.1.9 | Columnux25AdmnChannelLTC | read-write | mandatory | Low end of the two-way incoming logical channel. If both Low and High ends of the channel are set to 0, there are no two-way incoming channels. Default=1024. |
| 1.3.6.1.4.1.429.1.10.1.1.10 | Columnux25AdmnChannelHTC | read-write | mandatory | High end of the two-way incoming logical channel. If both Low and High ends of the channel are set to 0, there are no two-way incoming channels. Default=1087. |
| 1.3.6.1.4.1.429.1.10.1.1.11 | Columnux25AdmnChannelLOC | read-write | mandatory | Low end of the one-way outgoing logical channel. If both Low and High ends of the channel are set to 0, there are no one-way outgoing channels. Default=0. |
| 1.3.6.1.4.1.429.1.10.1.1.12 | Columnux25AdmnChannelHOC | read-write | mandatory | High end of the one-way outgoing logical channel. If both Low and High ends of the channel are set to 0, there are no one-way outgoing channels. Default=0. |
| 1.3.6.1.4.1.429.1.10.2 | Tableux25AdmnClassTable | not-accessible | mandatory | Defines objects for the parameters of an X.25 interface which the administrator can read and set. |
| 1.3.6.1.4.1.429.1.10.2.1 | Rowux25AdmnClassEntry | not-accessible | mandatory | Entries of ux25AdmnClassTable. |
| 1.3.6.1.4.1.429.1.10.2.1.1 | Columnux25AdmnClassIndex | read-only | mandatory | A unique value for each X.25 subnetwork entity in the chassis. The value of this object matches the value of the index of the corresponding X.25 subnetwork ent… |
| 1.3.6.1.4.1.429.1.10.2.1.2 | Columnux25AdmnLocMaxThruPutClass | read-write | mandatory | The maximum value of the throughput class Quality of Service parameter which is supported. According to ISO 8208 this parameter is bounded in the range >=3 and… |
| 1.3.6.1.4.1.429.1.10.2.1.3 | Columnux25AdmnRemMaxThruPutClass | read-write | mandatory | The maximum value of the throughput class Quality of Service parameter which is supported. According to ISO 8208 this parameter is bounded in the range >=3 and… |
| 1.3.6.1.4.1.429.1.10.2.1.4 | Columnux25AdmnLocDefThruPutClass | read-write | mandatory | The default throughput class that is defined for the local-to-remote direction. In some networks, such as TELENET, negotiation of throughput class is constrain… |
| 1.3.6.1.4.1.429.1.10.2.1.5 | Columnux25AdmnRemDefThruPutClass | read-write | mandatory | The default throughput class value defined for remote-to-local direction. In some networks, such as TELENET, negotiation of throughput class is constrained to … |
| 1.3.6.1.4.1.429.1.10.2.1.6 | Columnux25AdmnLocMinThruPutClass | read-write | mandatory | According to ISO 8208, the throughput class parameter is defined in the range of >=3 to <=12. Some PSDNs may provide different mapping, in which case, this par… |
| 1.3.6.1.4.1.429.1.10.2.1.7 | Columnux25AdmnRemMinThruPutClass | read-write | mandatory | According to ISO 8208, the throughput class parameter is defined in the range of >=3 to <=12. Some PSDNs may provide different mapping, in which case, this par… |
| 1.3.6.1.4.1.429.1.10.2.1.8 | Columnux25AdmnThclassNegToDef | read-write | mandatory | Determines if throughput class negotiation will be used for certain network procedures. Default=disable(1). |
| 1.3.6.1.4.1.429.1.10.2.1.9 | Columnux25AdmnThclassType | read-write | mandatory | Defines which throughput class encodings can be used to assign packet and window sizes. Some implementations of X.25 do not use the X.25 packet and window nego… |
| 1.3.6.1.4.1.429.1.10.2.1.10 | Columnux25AdmnThclassWinMap | read-write | mandatory | The mapping between throughput class and a window parameter. Each number has a range of 1 to 127. Default=3.3.3.3.3.3.3.3.3.3.3.3.3.3.3.3 |
| 1.3.6.1.4.1.429.1.10.2.1.11 | Columnux25AdmnThclassPackMap | read-write | mandatory | The mapping between the throughput class and a packet parameter. Each number has a range of 4 to 12. Default=7.7.7.7.7.7.7.7.7.7.7.7.7.7.7.7 |
| 1.3.6.1.4.1.429.1.10.3 | Tableux25AdmnPacketTable | not-accessible | mandatory | Defines objects for the parameters of an X.25 interface which the administrator can read and set. |
| 1.3.6.1.4.1.429.1.10.3.1 | Rowux25AdmnPacketEntry | not-accessible | mandatory | Entries of ux25AdmnPacketTable. |
| 1.3.6.1.4.1.429.1.10.3.1.1 | Columnux25AdmnPacketIndex | read-only | mandatory | A unique value for each X.25 subnetwork entity in the chassis. The value of this object matches the value of the index of the corresponding X.25 subnetwork ent… |
| 1.3.6.1.4.1.429.1.10.3.1.2 | Columnux25AdmnPktSequencing | read-write | mandatory | Indicates whether modulo 8 or 128 sequence numbering operates on the network. Default=pktSeq8(16). |
| 1.3.6.1.4.1.429.1.10.3.1.3 | Columnux25AdmnLocMaxPktSize | read-write | mandatory | Maximum acceptable size of packets in the local-to-remote direction. On an incoming call, a value for the packet size parameter greater than this value will be… |
| 1.3.6.1.4.1.429.1.10.3.1.4 | Columnux25AdmnRemMaxPktSize | read-write | mandatory | Maximum acceptable size of packets in the remote-to-local direction. On an incoming call, a value for the packet size parameter greater than this value will be… |
| 1.3.6.1.4.1.429.1.10.3.1.5 | Columnux25AdmnLocDefPktSize | read-write | mandatory | Specifies the value of the default packet size for the direction local-to-remote, which may be nonstandard, provided the value is agreed between the communicat… |
| 1.3.6.1.4.1.429.1.10.3.1.6 | Columnux25AdmnRemDefPktSize | read-write | mandatory | Specifies the value of the default packet size for the direction remote-to-local, which may be nonstandard, provided the value is agreed between the communicat… |
| 1.3.6.1.4.1.429.1.10.3.1.7 | Columnux25AdmnLocMaxWinSize | read-write | mandatory | Specifies the maximum local window size. NOTE: 127 allowed only for modulo 128 networks. Default=7. |
| 1.3.6.1.4.1.429.1.10.3.1.8 | Columnux25AdmnRemMaxWinSize | read-write | mandatory | Specifies the maximum remote window size. NOTE: 127 allowed only for modulo 128 networks. Default=7. |
| 1.3.6.1.4.1.429.1.10.3.1.9 | Columnux25AdmnLocDefWinSize | read-write | mandatory | Specifies the value of the default window size, which may be nonstandard, provided the value is agreed on by all parties on the LAN between the DTE and DCE. NO… |
| 1.3.6.1.4.1.429.1.10.3.1.10 | Columnux25AdmnRemDefWinSize | read-write | mandatory | Specifies the value of the default window size, which may be nonstandard, provided the value is agreed on by all parties on the LAN between the DTE and DCE. NO… |
| 1.3.6.1.4.1.429.1.10.3.1.11 | Columnux25AdmnMaxNSDULimit | read-write | mandatory | The default maximum length beyond which concatenation is stopped and data currently held is passed to the Network Service user. Default=256. |
| 1.3.6.1.4.1.429.1.10.3.1.12 | Columnux25AdmnAccNoDiagnostic | read-write | mandatory | Allow the omission of the diagnostic byte in incoming RESTART, CLEAR and RESET INDICATION packets. Default=disable(1). |
| 1.3.6.1.4.1.429.1.10.3.1.13 | Columnux25AdmnUseDiagnosticPacket | read-write | mandatory | Use diagnostic packets. Default=disable(1). |
| 1.3.6.1.4.1.429.1.10.3.1.14 | Columnux25AdmnItutClearLen | read-write | mandatory | Restrict the length of a CLEAR INDICATION to 5 bytes and a CLEAR CONFIRM to 3 bytes. Default=disable(1). |
| 1.3.6.1.4.1.429.1.10.3.1.15 | Columnux25AdmnBarDiagnosticPacket | read-write | mandatory | Bar diagnostic packets. Default=disable(1). |
| 1.3.6.1.4.1.429.1.10.3.1.16 | Columnux25AdmnDiscNzDiagnostic | read-write | mandatory | Discard all diagnostic packets on a non-zero LCN. Default=disable(1). |
| 1.3.6.1.4.1.429.1.10.3.1.17 | Columnux25AdmnAcceptHexAdd | read-write | mandatory | Allow DTE addresses to contain hexadecimal digits. Default=disable(1). |
| 1.3.6.1.4.1.429.1.10.3.1.18 | Columnux25AdmnBarNonPrivilegeListen | read-write | mandatory | Disallow a non-privileged user (i.e without superuser privilege) from listening for incoming calls. Default=enable(2). |
| 1.3.6.1.4.1.429.1.10.3.1.19 | Columnux25AdmnIntlAddrRecognition | read-write | mandatory | Determine whether outgoing international calls are to be accepted. The values and their interpretation are: 1 - International calls are not distinguished. 2 - … |
| 1.3.6.1.4.1.429.1.10.3.1.20 | Columnux25AdmnDnic | read-write | mandatory | This field contains the first four digits of DNIC and is only used when ux25AdmnIntlAddrRecognition is set to examineDnic(2). Note this field must contain exac… |
| 1.3.6.1.4.1.429.1.10.3.1.21 | Columnux25AdmnIntlPrioritized | read-write | mandatory | Determine whether some prioritizing method is to used for international calls and is used in conjuction with ux25AdmnPrtyEncodeCtrl and ux25AdmnPrtyPktForced v… |
| 1.3.6.1.4.1.429.1.10.3.1.22 | Columnux25AdmnPrtyEncodeCtrl | read-write | mandatory | Describes how the priority request is to be encoded for this PSDN. Default=x2588(1). |
| 1.3.6.1.4.1.429.1.10.3.1.23 | Columnux25AdmnPrtyPktForcedVal | read-write | mandatory | If this entry is other than prioPktSz1(1) all priority call requests and incoming calls should have the associated packet size parameter forced to this value. … |
| 1.3.6.1.4.1.429.1.10.3.1.24 | Columnux25AdmnSrcAddrCtrl | read-write | mandatory | Provide a means to override or set the calling address in outgoing call requests for this PSDN. Default=noSaCntrl(1). |
| 1.3.6.1.4.1.429.1.10.3.1.25 | Columnux25AdmnDbitInAccept | read-write | mandatory | Defines the action to take when a Call Accept is received with the D-bit set and there is no local D-bit support. Default=clearCall(3). |
| 1.3.6.1.4.1.429.1.10.3.1.26 | Columnux25AdmnDbitOutAccept | read-write | mandatory | Defines the action to take when the remote user sends a Call Accept with the D-bit set when the local user did not request use of the D-bit. Default=clearCall(… |
| 1.3.6.1.4.1.429.1.10.3.1.27 | Columnux25AdmnDbitInData | read-write | mandatory | Defines the action to take when a data packet is received with the D-bit set and the local user did not request use of the D-bit. Default=clearCall(3). |
| 1.3.6.1.4.1.429.1.10.3.1.28 | Columnux25AdmnDbitOutData | read-write | mandatory | Defines the action when the local user send a data packet with the D-bit set, but the remote party has not indicated D-bit support. Default=clearCall(3). |
| 1.3.6.1.4.1.429.1.10.4 | Tableux25AdmnSubscriberTable | not-accessible | mandatory | Defines objects for the parameters of an X.25 interface which the administrator can read and set. |
| 1.3.6.1.4.1.429.1.10.4.1 | Rowux25AdmnSubscriberEntry | not-accessible | mandatory | Entries of ux25AdmnSubscriberTable. |
| 1.3.6.1.4.1.429.1.10.4.1.1 | Columnux25AdmnSubscriberIndex | read-only | mandatory | A unique value for each X.25 subnetwork entity in the chassis. The value of this object matches the value of the index of the corresponding X.25 subnetwork ent… |
| 1.3.6.1.4.1.429.1.10.4.1.2 | Columnux25AdmnSubCugIaoa | read-write | mandatory | Specifies if this DTE subscribes to Closed User Groups with Incoming or Outgoing access. Default=enable(2). |
| 1.3.6.1.4.1.429.1.10.4.1.3 | Columnux25AdmnSubCugPref | read-write | mandatory | Specifies if this DTE subscribes to a Preferential Closed User Groups. Default=disable(1). |
| 1.3.6.1.4.1.429.1.10.4.1.4 | Columnux25AdmnSubCugoa | read-write | mandatory | Specifies if this DTE subscribes to Closed User Groups with Outgoing access. Default=disable(1). |
| 1.3.6.1.4.1.429.1.10.4.1.5 | Columnux25AdmnSubCugia | read-write | mandatory | Specifies whether or not this DTE subscribes to Closed User Groups with Incoming Access. Default=disable(1). |
| 1.3.6.1.4.1.429.1.10.4.1.6 | Columnux25AdmnCugFormat | read-write | mandatory | The maximum number of Closed User Groups that this DTE subscribes to. This will be one of two ranges: Basic (100 or fewer) or Extended (between 101 and 10000).… |
| 1.3.6.1.4.1.429.1.10.4.1.7 | Columnux25AdmnBarInCug | read-write | mandatory | Provides the means to force rejection of any incoming calls carrying the Closed User Group optional facility (which is necessary in some networks, such as DDN.… |
| 1.3.6.1.4.1.429.1.10.4.1.8 | Columnux25AdmnSubExtended | read-write | mandatory | Subscribe to extended call packets (Window and Packet size negotiation is permitted). Default=enable(2). |
| 1.3.6.1.4.1.429.1.10.4.1.9 | Columnux25AdmnBarExtended | read-write | mandatory | Treat window and packet size negotiation in incoming packets as a procedure error. Default=disable(1). |
| 1.3.6.1.4.1.429.1.10.4.1.10 | Columnux25AdmnSubFstSelNoRstrct | read-write | mandatory | Subscribe to fast select with no restriction on response. Default=enable(2). |
| 1.3.6.1.4.1.429.1.10.4.1.11 | Columnux25AdmnSubFstSelWthRstrct | read-write | mandatory | Subscribe to fast select with restriction on response. Default=disable(1). |
| 1.3.6.1.4.1.429.1.10.4.1.12 | Columnux25AdmnAccptRvsChrgng | read-write | mandatory | Allow incoming calls to specify the reverse charging facility. Default=disable(1). |
| 1.3.6.1.4.1.429.1.10.4.1.13 | Columnux25AdmnSubLocChargePrevent | read-write | mandatory | Subscribe to local charging prevention. Default=disable(1). |
| 1.3.6.1.4.1.429.1.10.4.1.14 | Columnux25AdmnSubToaNpiFormat | read-write | mandatory | Subscribe to TOA/NPI Address Format. Default=disable(1). |
| 1.3.6.1.4.1.429.1.10.4.1.15 | Columnux25AdmnBarToaNpiFormat | read-write | mandatory | Bar incoming call set-up and clearing packets which use the TOA/NPI Address Format. Default=disable(1). |
| 1.3.6.1.4.1.429.1.10.4.1.16 | Columnux25AdmnSubNuiOverride | read-write | mandatory | Subscribe to NUI override. Deafult=disable(1). |
| 1.3.6.1.4.1.429.1.10.4.1.17 | Columnux25AdmnBarInCall | read-write | mandatory | Bar incoming calls. Default=disable(1). |
| 1.3.6.1.4.1.429.1.10.4.1.18 | Columnux25AdmnBarOutCall | read-write | mandatory | Bar outgoing calls. Default=disable(1). |
| 1.3.6.1.4.1.429.1.10.5 | Tableux25AdmnTimerTable | not-accessible | mandatory | Defines objects for the parameters of an X.25 interface which the administrator can read and set. |
| 1.3.6.1.4.1.429.1.10.5.1 | Rowux25AdmnTimerEntry | not-accessible | mandatory | Entries of ux25AdmnTimerTable. |
| 1.3.6.1.4.1.429.1.10.5.1.1 | Columnux25AdmnTimerIndex | read-only | mandatory | A unique value for each X.25 subnetwork entity in the chassis. The value of this object matches the value of the index of the corresponding X.25 subnetwork ent… |
| 1.3.6.1.4.1.429.1.10.5.1.2 | Columnux25AdmnAckDelay | read-write | mandatory | The maximum number of ticks (0.1 second units) over which a pending acknowledgement is withheld. Default=5. |
| 1.3.6.1.4.1.429.1.10.5.1.3 | Columnux25AdmnRstrtTime | read-write | mandatory | The number of ticks (0.1 second units) for the DTE timer parameter T20, the Restart Request Response Timer. Default=1800. |
| 1.3.6.1.4.1.429.1.10.5.1.4 | Columnux25AdmnCallTime | read-write | mandatory | The number of ticks (0.1 second units) for the DTE timer parameter T21, the Call Request Response Timer. Default=2000. |
| 1.3.6.1.4.1.429.1.10.5.1.5 | Columnux25AdmnRstTime | read-write | mandatory | The number of ticks (0.1 second units) for the DTE timer parameter T22, the Reset Request Response Timer. Default=1800. |
| 1.3.6.1.4.1.429.1.10.5.1.6 | Columnux25AdmnClrTime | read-write | mandatory | The number of ticks (0.1 second units) for the DTE timer parameter T23, the Clear Request Response Timer. Default=1800. |
| 1.3.6.1.4.1.429.1.10.5.1.7 | Columnux25AdmnWinStatTime | read-write | mandatory | Related, but does not correspond exactly to the DTE Window Status Transmission Timer, T24. Specifies the number of ticks (0.1 second units) for the maximum tim… |
| 1.3.6.1.4.1.429.1.10.5.1.8 | Columnux25AdmnWinRotTime | read-write | mandatory | The number of ticks (0.1 second units) for the DTE timer parameter T25, the Window Rotation Timer. Default=1500. |
| 1.3.6.1.4.1.429.1.10.5.1.9 | Columnux25AdmnIntrptTime | read-write | mandatory | The number of ticks (0.1 second units) for the DTE timer parameter T26, the Interrupt Response Timer. Default=1800. |
| 1.3.6.1.4.1.429.1.10.5.1.10 | Columnux25AdmnIdleValue | read-write | mandatory | The number of ticks (0.1 second units) during which a link level connection associated with no connections will be maintained. If the link is to a WAN then thi… |
| 1.3.6.1.4.1.429.1.10.5.1.11 | Columnux25AdmnConnectValue | read-write | mandatory | Specifies the number of ticks (0.1 second units), over which the DTE/DCE resolution phase be completely implemented in order to prevent the unlikely event that… |
| 1.3.6.1.4.1.429.1.10.5.1.12 | Columnux25AdmnRstrtCnt | read-write | mandatory | The number of ticks (0.1 second units) for the DTE Restart Request Retransmission Count. Default=1. |
| 1.3.6.1.4.1.429.1.10.5.1.13 | Columnux25AdmnRstCnt | read-write | mandatory | The number of ticks (0.1 second units) for the DTE Reset Request Retransmission Count. Default=1. |
| 1.3.6.1.4.1.429.1.10.5.1.14 | Columnux25AdmnClrCnt | read-write | mandatory | The number of ticks (0.1 second units) for the DTE Clear Request Retransmission Count. Default=1. |
| 1.3.6.1.4.1.429.1.10.5.1.15 | Columnux25AdmnLocalDelay | read-write | mandatory | The transit delay (in 0.1 second units) attributed to internal processing. Default=5. |
| 1.3.6.1.4.1.429.1.10.5.1.16 | Columnux25AdmnAccessDelay | read-write | mandatory | The transit delay (in 0.1 second units) attributed to the effect of the line transmission rate. Default=5. |
| 1.3.6.1.4.1.429.1.10.6 | Tableux25OperChannelTable | not-accessible | mandatory | Defines objects that report the current parameters used by a running interface. These objects are read only. |
| 1.3.6.1.4.1.429.1.10.6.1 | Rowux25OperChannelEntry | not-accessible | mandatory | Entries of ux25OperChannelTable. |
| 1.3.6.1.4.1.429.1.10.6.1.1 | Columnux25OperChannelIndex | read-only | mandatory | |
| 1.3.6.1.4.1.429.1.10.6.1.2 | Columnux25OperNetMode | read-only | mandatory | |
| 1.3.6.1.4.1.429.1.10.6.1.3 | Columnux25OperProtocolVersion | read-only | mandatory | |
| 1.3.6.1.4.1.429.1.10.6.1.4 | Columnux25OperInterfaceMode | read-only | mandatory | |
| 1.3.6.1.4.1.429.1.10.6.1.5 | Columnux25OperLowestPVCVal | read-only | mandatory | |
| 1.3.6.1.4.1.429.1.10.6.1.6 | Columnux25OperHighestPVCVal | read-only | mandatory | |
| 1.3.6.1.4.1.429.1.10.6.1.7 | Columnux25OperChannelLIC | read-only | mandatory | |
| 1.3.6.1.4.1.429.1.10.6.1.8 | Columnux25OperChannelHIC | read-only | mandatory | |
| 1.3.6.1.4.1.429.1.10.6.1.9 | Columnux25OperChannelLTC | read-only | mandatory | |
| 1.3.6.1.4.1.429.1.10.6.1.10 | Columnux25OperChannelHTC | read-only | mandatory | |
| 1.3.6.1.4.1.429.1.10.6.1.11 | Columnux25OperChannelLOC | read-only | mandatory | |
| 1.3.6.1.4.1.429.1.10.6.1.12 | Columnux25OperChannelHOC | read-only | mandatory | |
| 1.3.6.1.4.1.429.1.10.7 | Tableux25OperClassTable | not-accessible | mandatory | Defines objects that report the current parameters used by a running interface. These objects are read only. |
| 1.3.6.1.4.1.429.1.10.7.1 | Rowux25OperClassEntry | not-accessible | mandatory | Entries of ux25OperTable. |
| 1.3.6.1.4.1.429.1.10.7.1.1 | Columnux25OperClassIndex | read-only | mandatory | |
| 1.3.6.1.4.1.429.1.10.7.1.2 | Columnux25OperLocMaxThruPutClass | read-only | mandatory | |
| 1.3.6.1.4.1.429.1.10.7.1.3 | Columnux25OperRemMaxThruPutClass | read-only | mandatory | |
| 1.3.6.1.4.1.429.1.10.7.1.4 | Columnux25OperLocDefThruPutClass | read-only | mandatory | |
| 1.3.6.1.4.1.429.1.10.7.1.5 | Columnux25OperRemDefThruPutClass | read-only | mandatory | |
| 1.3.6.1.4.1.429.1.10.7.1.6 | Columnux25OperLocMinThruPutClass | read-only | mandatory | |
| 1.3.6.1.4.1.429.1.10.7.1.7 | Columnux25OperRemMinThruPutClass | read-only | mandatory | |
| 1.3.6.1.4.1.429.1.10.7.1.8 | Columnux25OperThclassNegToDef | read-only | mandatory | |
| 1.3.6.1.4.1.429.1.10.7.1.9 | Columnux25OperThclassType | read-only | mandatory | |
| 1.3.6.1.4.1.429.1.10.7.1.10 | Columnux25OperThclassWinMap | read-only | mandatory | |
| 1.3.6.1.4.1.429.1.10.7.1.11 | Columnux25OperThclassPackMap | read-only | mandatory | |
| 1.3.6.1.4.1.429.1.10.8 | Tableux25OperPacketTable | not-accessible | mandatory | Defines objects that report the current parameters used by a running interface. These objects are read only. |
| 1.3.6.1.4.1.429.1.10.8.1 | Rowux25OperPacketEntry | not-accessible | mandatory | Entries of ux25OperPacketTable. |
| 1.3.6.1.4.1.429.1.10.8.1.1 | Columnux25OperPacketIndex | read-only | mandatory | |
| 1.3.6.1.4.1.429.1.10.8.1.2 | Columnux25OperPktSequencing | read-only | mandatory | |
| 1.3.6.1.4.1.429.1.10.8.1.3 | Columnux25OperLocMaxPktSize | read-only | mandatory | |
| 1.3.6.1.4.1.429.1.10.8.1.4 | Columnux25OperRemMaxPktSize | read-only | mandatory | |
| 1.3.6.1.4.1.429.1.10.8.1.5 | Columnux25OperLocDefPktSize | read-only | mandatory | |
| 1.3.6.1.4.1.429.1.10.8.1.6 | Columnux25OperRemDefPktSize | read-only | mandatory | |
| 1.3.6.1.4.1.429.1.10.8.1.7 | Columnux25OperLocMaxWinSize | read-only | mandatory | |
| 1.3.6.1.4.1.429.1.10.8.1.8 | Columnux25OperRemMaxWinSize | read-only | mandatory | |
| 1.3.6.1.4.1.429.1.10.8.1.9 | Columnux25OperLocDefWinSize | read-only | mandatory | |
| 1.3.6.1.4.1.429.1.10.8.1.10 | Columnux25OperRemDefWinSize | read-only | mandatory | |
| 1.3.6.1.4.1.429.1.10.8.1.11 | Columnux25OperMaxNSDULimit | read-only | mandatory | |
| 1.3.6.1.4.1.429.1.10.8.1.12 | Columnux25OperAccNoDiagnostic | read-only | mandatory | |
| 1.3.6.1.4.1.429.1.10.8.1.13 | Columnux25OperUseDiagnosticPacket | read-only | mandatory | |
| 1.3.6.1.4.1.429.1.10.8.1.14 | Columnux25OperItutClearLen | read-only | mandatory | |
| 1.3.6.1.4.1.429.1.10.8.1.15 | Columnux25OperBarDiagnosticPacket | read-only | mandatory | |
| 1.3.6.1.4.1.429.1.10.8.1.16 | Columnux25OperDiscNzDiagnostic | read-only | mandatory | |
| 1.3.6.1.4.1.429.1.10.8.1.17 | Columnux25OperAcceptHexAdd | read-only | mandatory | |
| 1.3.6.1.4.1.429.1.10.8.1.18 | Columnux25OperBarNonPrivilegeListen | read-only | mandatory | |
| 1.3.6.1.4.1.429.1.10.8.1.19 | Columnux25OperIntlAddrRecognition | read-only | mandatory | |
| 1.3.6.1.4.1.429.1.10.8.1.20 | Columnux25OperDnic | read-only | mandatory | |
| 1.3.6.1.4.1.429.1.10.8.1.21 | Columnux25OperIntlPrioritized | read-only | mandatory | |
| 1.3.6.1.4.1.429.1.10.8.1.22 | Columnux25OperPrtyEncodeCtrl | read-only | mandatory | |
| 1.3.6.1.4.1.429.1.10.8.1.23 | Columnux25OperPrtyPktForcedVal | read-only | mandatory | |
| 1.3.6.1.4.1.429.1.10.8.1.24 | Columnux25OperSrcAddrCtrl | read-only | mandatory | |
| 1.3.6.1.4.1.429.1.10.8.1.25 | Columnux25OperDbitInAccept | read-only | mandatory | |
| 1.3.6.1.4.1.429.1.10.8.1.26 | Columnux25OperDbitOutAccept | read-only | mandatory | |
| 1.3.6.1.4.1.429.1.10.8.1.27 | Columnux25OperDbitInData | read-only | mandatory | |
| 1.3.6.1.4.1.429.1.10.8.1.28 | Columnux25OperDbitOutData | read-only | mandatory | |
| 1.3.6.1.4.1.429.1.10.9 | Tableux25OperSubscriberTable | not-accessible | mandatory | Defines objects that report the current parameters used by a running interface. These objects are read only. |
| 1.3.6.1.4.1.429.1.10.9.1 | Rowux25OperSubscriberEntry | not-accessible | mandatory | Entries of ux25OperSubscriberTable. |
| 1.3.6.1.4.1.429.1.10.9.1.1 | Columnux25OperSubscriberIndex | read-only | mandatory | |
| 1.3.6.1.4.1.429.1.10.9.1.2 | Columnux25OperSubCugIaoa | read-only | mandatory | |
| 1.3.6.1.4.1.429.1.10.9.1.3 | Columnux25OperSubCugPref | read-only | mandatory | |
| 1.3.6.1.4.1.429.1.10.9.1.4 | Columnux25OperSubCugoa | read-only | mandatory | |
| 1.3.6.1.4.1.429.1.10.9.1.5 | Columnux25OperSubCugia | read-only | mandatory | |
| 1.3.6.1.4.1.429.1.10.9.1.6 | Columnux25OperCugFormat | read-only | mandatory | |
| 1.3.6.1.4.1.429.1.10.9.1.7 | Columnux25OperBarInCug | read-only | mandatory | |
| 1.3.6.1.4.1.429.1.10.9.1.8 | Columnux25OperSubExtended | read-only | mandatory | |
| 1.3.6.1.4.1.429.1.10.9.1.9 | Columnux25OperBarExtended | read-only | mandatory | |
| 1.3.6.1.4.1.429.1.10.9.1.10 | Columnux25OperSubFstSelNoRstrct | read-only | mandatory | |
| 1.3.6.1.4.1.429.1.10.9.1.11 | Columnux25OperSubFstSelWthRstrct | read-only | mandatory | |
| 1.3.6.1.4.1.429.1.10.9.1.12 | Columnux25OperAccptRvsChrgng | read-only | mandatory | |
| 1.3.6.1.4.1.429.1.10.9.1.13 | Columnux25OperSubLocChargePrevent | read-only | mandatory | |
| 1.3.6.1.4.1.429.1.10.9.1.14 | Columnux25OperSubToaNpiFormat | read-only | mandatory | |
| 1.3.6.1.4.1.429.1.10.9.1.15 | Columnux25OperBarToaNpiFormat | read-only | mandatory | |
| 1.3.6.1.4.1.429.1.10.9.1.16 | Columnux25OperSubNuiOverride | read-only | mandatory | |
| 1.3.6.1.4.1.429.1.10.9.1.17 | Columnux25OperBarInCall | read-only | mandatory | |
| 1.3.6.1.4.1.429.1.10.9.1.18 | Columnux25OperBarOutCall | read-only | mandatory | |
| 1.3.6.1.4.1.429.1.10.10 | Tableux25OperTimerTable | not-accessible | mandatory | Defines objects that report the current parameters used by a running interface. These objects are read only. |
| 1.3.6.1.4.1.429.1.10.10.1 | Rowux25OperTimerEntry | not-accessible | mandatory | Entries of ux25OperTimerTable. |
| 1.3.6.1.4.1.429.1.10.10.1.1 | Columnux25OperTimerIndex | read-only | mandatory | |
| 1.3.6.1.4.1.429.1.10.10.1.2 | Columnux25OperAckDelay | read-only | mandatory | |
| 1.3.6.1.4.1.429.1.10.10.1.3 | Columnux25OperRstrtTime | read-only | mandatory | |
| 1.3.6.1.4.1.429.1.10.10.1.4 | Columnux25OperCallTime | read-only | mandatory | |
| 1.3.6.1.4.1.429.1.10.10.1.5 | Columnux25OperRstTime | read-only | mandatory | |
| 1.3.6.1.4.1.429.1.10.10.1.6 | Columnux25OperClrTime | read-only | mandatory | |
| 1.3.6.1.4.1.429.1.10.10.1.7 | Columnux25OperWinStatTime | read-only | mandatory | |
| 1.3.6.1.4.1.429.1.10.10.1.8 | Columnux25OperWinRotTime | read-only | mandatory | |
| 1.3.6.1.4.1.429.1.10.10.1.9 | Columnux25OperIntrptTime | read-only | mandatory | |
| 1.3.6.1.4.1.429.1.10.10.1.10 | Columnux25OperIdleValue | read-only | mandatory | |
| 1.3.6.1.4.1.429.1.10.10.1.11 | Columnux25OperConnectValue | read-only | mandatory | |
| 1.3.6.1.4.1.429.1.10.10.1.12 | Columnux25OperRstrtCnt | read-only | mandatory | |
| 1.3.6.1.4.1.429.1.10.10.1.13 | Columnux25OperRstCnt | read-only | mandatory | |
| 1.3.6.1.4.1.429.1.10.10.1.14 | Columnux25OperClrCnt | read-only | mandatory | |
| 1.3.6.1.4.1.429.1.10.10.1.15 | Columnux25OperLocalDelay | read-only | mandatory | |
| 1.3.6.1.4.1.429.1.10.10.1.16 | Columnux25OperAccessDelay | read-only | mandatory | |
| 1.3.6.1.4.1.429.1.10.11 | Tableux25StatTable | not-accessible | mandatory | Defines objects that report operational statistics for an X.25 interface. |
| 1.3.6.1.4.1.429.1.10.11.1 | Rowux25StatEntry | not-accessible | mandatory | Entries of ux25StatTable. |
| 1.3.6.1.4.1.429.1.10.11.1.1 | Columnux25StatIndex | read-only | mandatory | A unique value for each X.25 subnetwork entity in the chassis. The value of this object matches the value of the index of the corresponding X.25 subnetwork ent… |
| 1.3.6.1.4.1.429.1.10.11.1.2 | Columnux25StatCallsRcvd | read-only | mandatory | Number of incoming calls. |
| 1.3.6.1.4.1.429.1.10.11.1.3 | Columnux25StatCallsSent | read-only | mandatory | Number of outgoing calls. |
| 1.3.6.1.4.1.429.1.10.11.1.4 | Columnux25StatCallsRcvdEstab | read-only | mandatory | Number of incoming calls established. |
| 1.3.6.1.4.1.429.1.10.11.1.5 | Columnux25StatCallsSentEstab | read-only | mandatory | Number of outgoing calls established. |
| 1.3.6.1.4.1.429.1.10.11.1.6 | Columnux25StatDataPktsRcvd | read-only | mandatory | Number of data packets received. |
| 1.3.6.1.4.1.429.1.10.11.1.7 | Columnux25StatDataPktsSent | read-only | mandatory | Number of data packets sent. |
| 1.3.6.1.4.1.429.1.10.11.1.8 | Columnux25StatRestartsRcvd | read-only | mandatory | Number of restarts received. |
| 1.3.6.1.4.1.429.1.10.11.1.9 | Columnux25StatRestartsSent | read-only | mandatory | Number of restarts sent. |
| 1.3.6.1.4.1.429.1.10.11.1.10 | Columnux25StatRcvrNotRdyRcvd | read-only | mandatory | Number of receiver not ready received. |
| 1.3.6.1.4.1.429.1.10.11.1.11 | Columnux25StatRcvrNotRdySent | read-only | mandatory | Number of receiver not ready sent. |
| 1.3.6.1.4.1.429.1.10.11.1.12 | Columnux25StatRcvrRdyRcvd | read-only | mandatory | Number of receiver ready received. |
| 1.3.6.1.4.1.429.1.10.11.1.13 | Columnux25StatRcvrRdySent | read-only | mandatory | Number of receiver ready sent. |
| 1.3.6.1.4.1.429.1.10.11.1.14 | Columnux25StatResetsRcvd | read-only | mandatory | Number of resets received. |
| 1.3.6.1.4.1.429.1.10.11.1.15 | Columnux25StatResetsSent | read-only | mandatory | Number of resets sent. |
| 1.3.6.1.4.1.429.1.10.11.1.16 | Columnux25StatDiagPktsRcvd | read-only | mandatory | Number of diagnostic packets received. |
| 1.3.6.1.4.1.429.1.10.11.1.17 | Columnux25StatDiagPktsSent | read-only | mandatory | Number of diagnostic packets sent. |
| 1.3.6.1.4.1.429.1.10.11.1.18 | Columnux25StatIntrptPktsRcvd | read-only | mandatory | Number of interrupt packets received. |
| 1.3.6.1.4.1.429.1.10.11.1.19 | Columnux25StatIntrptPktsSent | read-only | mandatory | Number of interrupt packets sent. |
| 1.3.6.1.4.1.429.1.10.11.1.20 | Columnux25StatPVCsInDatTrnsfrState | read-only | mandatory | Number of PVCs in Data Transfer State. |
| 1.3.6.1.4.1.429.1.10.11.1.21 | Columnux25StatSVCsInDatTrnsfrState | read-only | mandatory | Number of SVCs in Data Transfer State. |