Unisphere-Data-ATM-MIB
211 objects
The ATM MIB for the Unisphere Networks Inc. enterprise.
Imported Objects
| ATM-FORUM-SNMP-M4-MIB | atmfM4VcTestId atmfM4VcTestObject atmfM4VcTestResult atmfM4VcTestType atmfM4VpTestId atmfM4VpTestObject atmfM4VpTestResult atmfM4VpTestType |
| ATM-MIB | atmVclVci atmVclVpi atmVplVpi |
| ATM-TC-MIB | AtmAddr AtmVcIdentifier AtmVorXAdminStatus AtmVpIdentifier |
| IF-MIB | ifIndex InterfaceIndex InterfaceIndexOrZero |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Counter64 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | RowStatus TEXTUAL-CONVENTION TimeStamp TruthValue |
| Unisphere-Data-MIBs | usDataMibs |
| Unisphere-Data-TC | UsdEnable UsdNextIfIndex |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4874.2.2.8 | IdentityusdAtmMIB | The ATM MIB for the Unisphere Networks Inc. enterprise. | ||
| 1.3.6.1.4.1.4874.2.2.8.1 | NodeusdAtmObjects | |||
| 1.3.6.1.4.1.4874.2.2.8.1.1 | NodeusdAtmIfLayer | |||
| 1.3.6.1.4.1.4874.2.2.8.1.1.1 | ScalarusdAtmNextIfIndex | read-only | current | Coordinate ifIndex value allocation for entries in usdAtmIfTable. A GET of this object returns the next available ifIndex value to be used to create an entry i… |
| 1.3.6.1.4.1.4874.2.2.8.1.1.2 | TableusdAtmIfTable | not-accessible | current | This table contains entries for ATM interfaces present in the system. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.2.1 | RowusdAtmIfEntry | not-accessible | current | Each entry describes the characteristics of an ATM interface. Creating/deleting entries in this table causes corresponding entries for be created/deleted in if… |
| 1.3.6.1.4.1.4874.2.2.8.1.1.2.1.1 | ColumnusdAtmIfIndex | not-accessible | current | The ifIndex of the ATM interface. When creating entries in this table, suitable values for this object are determined by reading usdAtmNextIfIndex. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.2.1.2 | ColumnusdAtmIfRowStatus | read-create | current | Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndG… |
| 1.3.6.1.4.1.4874.2.2.8.1.1.2.1.3 | ColumnusdAtmIfLowerIfIndex | read-create | current | The ifIndex of an interface over which this ATM interface is to be layered. A value of zero indicates no layering. An implementation may choose to require that… |
| 1.3.6.1.4.1.4874.2.2.8.1.1.2.1.4 | ColumnusdAtmIfIlmiVpi | read-create | current | The VPI of the ILMI of a major ATM interface. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.2.1.5 | ColumnusdAtmIfIlmiVci | read-create | current | The VCI of the ILMI of a major ATM interface. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.2.1.6 | ColumnusdAtmIfIlmiVcd | read-create | current | An integer identifier for the ILMI, used in conjunction with the command-line interface. The value must be unique among VCs configured on the same ATM interfac… |
| 1.3.6.1.4.1.4874.2.2.8.1.1.2.1.7 | ColumnusdAtmIfIlmiPollFrequency | read-create | current | The amount of time in seconds between successive transmissions of ILMI messages on this interface for the purpose of detecting loss of ILMI connectivity. The d… |
| 1.3.6.1.4.1.4874.2.2.8.1.1.2.1.8 | ColumnusdAtmIfIlmiAdminState | read-create | current | The administrative status of ILMI in the ATM interface. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.2.1.9 | ColumnusdAtmIfUniVersion | read-create | current | Use to specify the User Network Interface (UNI) the router should use when ILMI link auto determination is unsuccesful or ILMI is disabled. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.2.1.10 | ColumnusdAtmIfOamCellRxAdminState | read-create | current | Use to specify the OAM Cell Receive Administrative state on this interface. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.2.1.11 | ColumnusdAtmIfInCells | read-only | current | The total number of cells received on this major interface. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.2.1.12 | ColumnusdAtmIfOutCells | read-only | current | The total number of cells transmitted on this major interface. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.2.1.13 | ColumnusdAtmIfVcCount | read-only | current | The total number of circuits configured on this interface. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.2.1.14 | ColumnusdAtmIfMapGroup | read-create | current | The NBMA map group this interface is associated with. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.2.1.15 | ColumnusdAtmIfCacAdminState | read-create | current | The administrative staus of CAC on this ATM major interface. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.2.1.16 | ColumnusdAtmIfCacUbrWeight | read-create | current | The bandwidth associated with every UBR and UBR with PCR connection configured on the ATM major interface. This value is used for CAC computation. The units ar… |
| 1.3.6.1.4.1.4874.2.2.8.1.1.2.1.17 | ColumnusdAtmIfCacSubscriptionBandwidth | read-create | current | The subscribed bandwidth of the ATM major interface. If this value is not specified or set to 0, the effective port bandwidth is used. When a Get operation is … |
| 1.3.6.1.4.1.4874.2.2.8.1.1.2.1.18 | ColumnusdAtmIfCacAvailableBandwidth | read-only | current | The available bandwidth of the ATM major interface. As connections are added or deleted on the interface, this value is updated. The units are kilo-bits per se… |
| 1.3.6.1.4.1.4874.2.2.8.1.1.2.1.23 | ColumnusdAtmIfOamCellFilter | read-create | current | The type of OAM cells to discard when usdAtmIfOamCellRxAdminState is set to oamCellAdminStateDisabled. The value oamCellFilterAlarm discards received OAM AIS a… |
| 1.3.6.1.4.1.4874.2.2.8.1.1.2.1.24 | ColumnusdAtmIfCacUsedBandwidthUpper | read-only | current | The most significant 32 bits of the CAC used bandwidth on the ATM major interface. The least significant 32 bits of the CAC used bandwidth are specified by usd… |
| 1.3.6.1.4.1.4874.2.2.8.1.1.2.1.25 | ColumnusdAtmIfCacUsedBandwidthLower | read-only | current | The least significant 32 bits of the CAC used bandwidth on the ATM major interface. The most significant 32 bits of the CAC used bandwidth are specified by usd… |
| 1.3.6.1.4.1.4874.2.2.8.1.1.3 | TableusdAtmPvcStatisticsTable | not-accessible | current | This table contains statistics for PVC entries. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.3.1 | RowusdAtmPvcStatisticsEntry | not-accessible | current | Each entry provides statistics on an ATM PVC. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.3.1.1 | ColumnusdAtmPvcStatsIfIndex | not-accessible | current | The ifIndex of the ATM interface. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.3.1.2 | ColumnusdAtmPvcStatsVpi | not-accessible | current | The VPI of the ATM VCC used by this ATM interface and PVC. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.3.1.3 | ColumnusdAtmPvcStatsVci | not-accessible | current | The VCI of the ATM VCC used by this ATM interface and PVC. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.3.1.4 | ColumnusdAtmPvcStatsInCells | read-only | current | Received cells. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.3.1.5 | ColumnusdAtmPvcStatsInCellOctets | read-only | current | Received cells octets. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.3.1.6 | ColumnusdAtmPvcStatsInPackets | read-only | current | Received AAL PDUs. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.3.1.7 | ColumnusdAtmPvcStatsInPacketOctets | read-only | current | Received AAL PDU octets. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.3.1.8 | ColumnusdAtmPvcStatsOutCells | read-only | current | Transmitted cells. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.3.1.9 | ColumnusdAtmPvcStatsOutCellOctets | read-only | current | Transmitted cell octets. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.3.1.10 | ColumnusdAtmPvcStatsOutPackets | read-only | current | Transmitted AAL PDUs. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.3.1.11 | ColumnusdAtmPvcStatsOutPacketOctets | read-only | current | Transmitted AAL PDU octets. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.3.1.12 | ColumnusdAtmPvcStatsInCellErrors | read-only | current | Received cells dropped due to errors. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.3.1.13 | ColumnusdAtmPvcStatsinPacketErrors | read-only | current | Received packets dropped due to errors. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.3.1.14 | ColumnusdAtmPvcStatsOutCellErrors | read-only | current | Cells not transmitted due to errors. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.3.1.15 | ColumnusdAtmPvcStatsOutPacketErrors | read-only | current | Packets not transmitted due to errors. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.3.1.16 | ColumnusdAtmPvcStatsInPacketDiscards | read-only | current | Received packets w/o errors discarded. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.3.1.17 | ColumnusdAtmPvcStatsInPacketOctetDiscards | read-only | current | Received bytes w/o errors discarded. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.3.1.18 | ColumnusdAtmPvcStatsInPacketUnknownProtocol | read-only | current | Received packets that are discarded because the interface can not discern or is not configured to support this protocol. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.4 | TableusdAtmVpTunnelTable | not-accessible | current | This table contains entries for ATM VP Tunnels present in the system. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.4.1 | RowusdAtmVpTunnelEntry | not-accessible | current | Each entry describes the characteristics of an ATM VP Tunnel. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.4.1.1 | ColumnusdAtmVpTunnelIfIndex | not-accessible | current | The ifIndex of the ATM interface. The value of this object is the same as the usdAtmIfIndex object in the usdAtmIfTable. Entries in this table cannot be create… |
| 1.3.6.1.4.1.4874.2.2.8.1.1.4.1.2 | ColumnusdAtmVpTunnelVpi | not-accessible | current | The VPI value for this VP tunnel entry. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.4.1.3 | ColumnusdAtmVpTunnelKbps | read-create | current | The tunnel rate in kilobits per second (kbps) for this entry. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.4.1.4 | ColumnusdAtmVpTunnelRowStatus | read-create | current | Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndG… |
| 1.3.6.1.4.1.4874.2.2.8.1.1.4.1.5 | ColumnusdAtmVpTunnelServiceCategory | read-create | current | The ATM service category for the tunnel. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.5 | TableusdAtmIfCapabilityTable | not-accessible | current | This table contains entries for ATM interfaces present in the system. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.5.1 | RowusdAtmIfCapabilityEntry | not-accessible | current | Each entry describes the capabilities of an ATM interface. A management client can use this table to determine differences in the configurable level of support… |
| 1.3.6.1.4.1.4874.2.2.8.1.1.5.1.1 | ColumnusdAtmIfCapabilityIndex | not-accessible | current | The ifIndex of the ATM interface. The value of this object is the same as usdAtmIfIndex in the usdAtmIfTable. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.5.1.2 | ColumnusdAtmIfCapabilityTrafficShaping | read-only | current | Indicates whether traffic shaping is supported on this interface; true(1) indicates that it is, false(2) indicates that it is not. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.5.1.3 | ColumnusdAtmIfCapabilityOam | read-only | current | Indicates whether OAM is supported on this interface; true(1) indicates that it is, false(2) indicates that it is not. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.5.1.4 | ColumnusdAtmIfCapabilityDefaultVcPerVp | read-only | current | The default number of VCs per VP for this interface. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.5.1.5 | ColumnusdAtmIfCapabilityNumVpiVciBits | read-only | current | The total range of bits used for constructing VPI/VCI identifiers for this interface. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.5.1.6 | ColumnusdAtmIfCapabilityMaxVcd | read-only | current | The maximum configurable value for a VCD on this interface. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.5.1.7 | ColumnusdAtmIfCapabilityMaxVpi | read-only | current | The maximum configurable value for a VPI on this interface. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.5.1.8 | ColumnusdAtmIfCapabilityMaxVci | read-only | current | The maximum configurable value for a VCI on this interface. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.5.1.9 | ColumnusdAtmIfCapabilityOamCellFilter | read-only | current | Indicates whether OAM cell filter is supported on this interface; true(1) indicates that it is, false(2) indicates that it is not. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.6 | TableusdAtmIfSvcSignallingTable | not-accessible | current | This table contains entries for extending the usdAtmIfTable for configuring signalling information for switched virtual connection (SVC). |
| 1.3.6.1.4.1.4874.2.2.8.1.1.6.1 | RowusdAtmIfSvcSignallingEntry | not-accessible | current | Each entry provides configuration parameters for ATM signalling on the interface. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.6.1.1 | ColumnusdAtmIfSvcSignallingVpi | read-write | current | The VPI identifier of the ATM circuit used for signalling for this interface. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.6.1.2 | ColumnusdAtmIfSvcSignallingVci | read-write | current | The VCI identifier of the ATM circuit used for signalling for this interface. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.6.1.3 | ColumnusdAtmIfSvcSignallingVcd | read-write | current | The VCI identifier of the ATM circuit used for signalling for this interface. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.6.1.4 | ColumnusdAtmIfSvcSignallingAdminStatus | read-write | current | The administrative status of signalling in the ATM interface. |
| 1.3.6.1.4.1.4874.2.2.8.1.2 | NodeusdAtmAal5IfLayer | |||
| 1.3.6.1.4.1.4874.2.2.8.1.2.1 | ScalarusdAtmAal5NextIfIndex | read-only | current | Coordinate ifIndex value allocation for entries in usdAtmAal5IfTable. A GET of this object returns the next available ifIndex value to be used to create an ent… |
| 1.3.6.1.4.1.4874.2.2.8.1.2.2 | TableusdAtmAal5IfTable | not-accessible | current | This table contains entries for ATM AAL5 interfaces present in the system. |
| 1.3.6.1.4.1.4874.2.2.8.1.2.2.1 | RowusdAtmAal5IfEntry | not-accessible | current | Each entry describes the characteristics of an ATM AAL5 interface. Creating/deleting entries in this table causes corresponding entries for be created/deleted … |
| 1.3.6.1.4.1.4874.2.2.8.1.2.2.1.1 | ColumnusdAtmAal5IfIndex | not-accessible | current | The ifIndex of the ATM AAL5 interface. When creating entries in this table, suitable values for this object are determined by reading usdAtmAal5NextIfIndex. |
| 1.3.6.1.4.1.4874.2.2.8.1.2.2.1.2 | ColumnusdAtmAal5IfRowStatus | read-create | current | Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndG… |
| 1.3.6.1.4.1.4874.2.2.8.1.2.2.1.3 | ColumnusdAtmAal5IfLowerIfIndex | read-create | current | The ifIndex of an ATM interface over which this ATM AAL5 interface is to be layered. A value of zero indicates no layering. An implementation may choose to req… |
| 1.3.6.1.4.1.4874.2.2.8.1.3 | NodeusdAtmSubIfLayer | |||
| 1.3.6.1.4.1.4874.2.2.8.1.3.1 | ScalarusdAtmSubIfNextIfIndex | read-only | current | Coordinate ifIndex value allocation for entries in usdAtmSubIfTable. A GET of this object returns the next available ifIndex value to be used to create an entr… |
| 1.3.6.1.4.1.4874.2.2.8.1.3.2 | TableusdAtmSubIfTable | not-accessible | current | This table contains entries for ATM Subinterfaces present in the system. |
| 1.3.6.1.4.1.4874.2.2.8.1.3.2.1 | RowusdAtmSubIfEntry | not-accessible | current | Each entry describes the characteristics of an ATM Subinterface. Creating/deleting entries in this table causes corresponding entries for be created/deleted in… |
| 1.3.6.1.4.1.4874.2.2.8.1.3.2.1.1 | ColumnusdAtmSubIfIndex | not-accessible | current | The ifIndex of the ATM Subinterface. When creating entries in this table, suitable values for this object are determined by reading usdAtmSubNextIfIndex. |
| 1.3.6.1.4.1.4874.2.2.8.1.3.2.1.2 | ColumnusdAtmSubIfRowStatus | read-create | current | Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndG… |
| 1.3.6.1.4.1.4874.2.2.8.1.3.2.1.3 | ColumnusdAtmSubIfDistinguisher | read-create | current | An integer identifier for the subinterface, used in conjunction with the command-line interface. It is provided here for cross-reference purposes only. The val… |
| 1.3.6.1.4.1.4874.2.2.8.1.3.2.1.4 | ColumnusdAtmSubIfLowerIfIndex | read-create | current | The ifIndex of an ATM AAL5 interface over which this ATM subinterface is to be layered. A value of zero indicates no layering. An implementation may choose to … |
| 1.3.6.1.4.1.4874.2.2.8.1.3.2.1.5 | ColumnusdAtmSubIfNbma | read-create | current | The NBMA administrative setting. Setting this value of this object to true(1) will enable multipoint access on this interface. Setting the value to false(2), w… |
| 1.3.6.1.4.1.4874.2.2.8.1.3.2.1.6 | ColumnusdAtmSubIfAddress | read-create | current | Specifies the local ATM NSAP address of the circuit. A GET operation returns a full 20-octet NSAP. A SET operation only requires 7 octets, since the prefix can… |
| 1.3.6.1.4.1.4874.2.2.8.1.3.3 | TableusdAtmSubIfVccTable | not-accessible | current | This table contains entries for ATM VCCs configured on ATM subinterfaces present in the system. An implementation may constrain the number of VCCs permitted to… |
| 1.3.6.1.4.1.4874.2.2.8.1.3.3.1 | RowusdAtmSubIfVccEntry | not-accessible | current | Each entry describes the characteristics of an ATM subinterface VCC. |
| 1.3.6.1.4.1.4874.2.2.8.1.3.3.1.1 | ColumnusdAtmSubIfVccVpi | not-accessible | current | The VPI of the ATM VCC used by this subinterface. |
| 1.3.6.1.4.1.4874.2.2.8.1.3.3.1.2 | ColumnusdAtmSubIfVccVci | not-accessible | current | The VCI of the ATM VCC used by this subinterface. |
| 1.3.6.1.4.1.4874.2.2.8.1.3.3.1.3 | ColumnusdAtmSubIfVccRowStatus | read-create | current | Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndG… |
| 1.3.6.1.4.1.4874.2.2.8.1.3.3.1.4 | ColumnusdAtmSubIfVccVcd | read-create | current | An integer identifier for the circuit, used in conjunction with the command-line interface. It is provided here for cross-reference purposes only. The value mu… |
| 1.3.6.1.4.1.4874.2.2.8.1.3.3.1.5 | ColumnusdAtmSubIfVccType | read-create | current | Specifies the encapsulation used by the circuit to carry IP datagrams. Encapsulations are as specified in RFC1483 Multiprotocol Interconnect over ATM. 'autocon… |
| 1.3.6.1.4.1.4874.2.2.8.1.3.3.1.6 | ColumnusdAtmSubIfVccServiceCategory | read-create | current | Service category for this circuit: ubr Unspecified Bit Rate (best effort). ubrPcr Unspecified Bit Rate with Peak Cell Rate limit. nrtVbr Non-RealTime Variable … |
| 1.3.6.1.4.1.4874.2.2.8.1.3.3.1.7 | ColumnusdAtmSubIfVccPcr | read-create | current | Peak Cell Rate, in kilobits per second (kbps), of this circuit. This parameter is only required when usdAtmSubIfVccServiceCategory is configured to have one of… |
| 1.3.6.1.4.1.4874.2.2.8.1.3.3.1.8 | ColumnusdAtmSubIfVccScr | read-create | current | Sustained Cell Rate, in kilobits per second (kbps), of this circuit. This parameter is only required when usdAtmSubIfVccServiceCategory is configured to have t… |
| 1.3.6.1.4.1.4874.2.2.8.1.3.3.1.9 | ColumnusdAtmSubIfVccMbs | read-create | current | Maximum Burst Size, in cells, of this circuit. This parameter is only required when usdAtmSubIfVccServiceCategory is configured to have the following value: nr… |
| 1.3.6.1.4.1.4874.2.2.8.1.3.3.1.10 | ColumnusdAtmSubIfInverseArp | read-create | current | Enables the inverse ARP protocol on this VCC; true(1) enables the protocol, false(2) disables it. |
| 1.3.6.1.4.1.4874.2.2.8.1.3.3.1.11 | ColumnusdAtmSubIfInverseArpRefresh | read-create | current | The refresh rate in minutes between inverse ARP protocol messages. |
| 1.3.6.1.4.1.4874.2.2.8.1.3.4 | TableusdAtmCircuitOamTable | not-accessible | current | This table contains circuit OAM data for a PVC. |
| 1.3.6.1.4.1.4874.2.2.8.1.3.4.1 | RowusdAtmCircuitOamEntry | not-accessible | current | Each entry provides OAM data on an ATM PVC. |
| 1.3.6.1.4.1.4874.2.2.8.1.3.4.1.1 | ColumnusdAtmCircuitOamIfIndex | not-accessible | current | The ifIndex of the ATM subinterface. |
| 1.3.6.1.4.1.4874.2.2.8.1.3.4.1.2 | ColumnusdAtmCircuitOamVpi | not-accessible | current | The VPI of the ATM VCC used by this ATM interface and PVC. |
| 1.3.6.1.4.1.4874.2.2.8.1.3.4.1.3 | ColumnusdAtmCircuitOamVci | not-accessible | current | The VCI of the ATM VCC used by this ATM interface and PVC. |
| 1.3.6.1.4.1.4874.2.2.8.1.3.4.1.4 | ColumnusdAtmCircuitOamAdminStatus | read-write | current | The administrative state of OAM for the interface identified by this entry. |
| 1.3.6.1.4.1.4874.2.2.8.1.3.4.1.5 | ColumnusdAtmCircuitOamLoopbackOperStatus | read-only | current | The operational status of OAM for the interface identified by this entry. oamOperStatusNotSupported(0) - OAM not supported on this interface oamOperStatusDisab… |
| 1.3.6.1.4.1.4874.2.2.8.1.3.4.1.6 | ColumnusdAtmCircuitVcOamOperStatus | read-only | current | The OAM VC operational status of this entry. oamVcOperStateAisState(0) - AIS cell received or underlying physical layer reporting transmission path AIS oamVcOp… |
| 1.3.6.1.4.1.4874.2.2.8.1.3.4.1.7 | ColumnusdAtmCircuitOamLoopbackFrequency | read-write | current | The OAM loopback frequency for the interface identified by this entry. |
| 1.3.6.1.4.1.4874.2.2.8.1.3.4.1.8 | ColumnusdAtmCircuitInOamF5Cells | read-only | current | Received OAM F5 cells. |
| 1.3.6.1.4.1.4874.2.2.8.1.3.4.1.9 | ColumnusdAtmCircuitInOamCellsDropped | read-only | current | Received OAM cells that were dropped. |
| 1.3.6.1.4.1.4874.2.2.8.1.3.4.1.10 | ColumnusdAtmCircuitOutOamF5Cells | read-only | current | Transmitted OAM F5 cells. |
| 1.3.6.1.4.1.4874.2.2.8.1.3.4.1.11 | ColumnusdAtmCircuitInOamF5EndToEndLoopbackCells | read-only | current | Received OAM F5 end-to-end loopback cells. |
| 1.3.6.1.4.1.4874.2.2.8.1.3.4.1.12 | ColumnusdAtmCircuitInOamF5SegmentLoopbackCells | read-only | current | Received OAM F5 segment loopback cells. |
| 1.3.6.1.4.1.4874.2.2.8.1.3.4.1.13 | ColumnusdAtmCircuitInOamF5AisCells | read-only | current | Received OAM F5 AIS cells. |
| 1.3.6.1.4.1.4874.2.2.8.1.3.4.1.14 | ColumnusdAtmCircuitInOamF5RdiCells | read-only | current | Received OAM F5 RDI cells. |
| 1.3.6.1.4.1.4874.2.2.8.1.3.4.1.15 | ColumnusdAtmCircuitOutOamF5EndToEndLoopbackCells | read-only | current | Transmitted OAM F5 end-to-end loopback cells. |
| 1.3.6.1.4.1.4874.2.2.8.1.3.4.1.16 | ColumnusdAtmCircuitOutOamF5SegmentLoopbackCells | read-only | current | Transmitted OAM F5 segment loopback cells. |
| 1.3.6.1.4.1.4874.2.2.8.1.3.4.1.17 | ColumnusdAtmCircuitOutOamF5RdiCells | read-only | current | Transmitted OAM F5 RDI cells. |
| 1.3.6.1.4.1.4874.2.2.8.1.3.5 | TableusdAtmSubIfVccTrafficShapingTable | not-accessible | current | This table contains entries for traffic shaping of ATM VCCs configured on ATM subinterfaces present in the system. This table augments the usdAtmSubIfVccTable … |
| 1.3.6.1.4.1.4874.2.2.8.1.3.5.1 | RowusdAtmSubIfVccTrafficShapingEntry | not-accessible | current | Each entry describes the traffic shping characteristics of an ATM subinterface VCC. |
| 1.3.6.1.4.1.4874.2.2.8.1.3.5.1.1 | ColumnusdAtmSubIfVccTrafficShapingCdvt | read-create | current | The network cell delay variation tolerance (CDVT) in tenths of a microsecond. |
| 1.3.6.1.4.1.4874.2.2.8.1.3.5.1.2 | ColumnusdAtmSubIfVccTrafficShapingClp0 | read-create | current | Specifies whether or not only CLP0 cells are to be policed according to the traffic contract. CLP1 cells are forwarded on a best-effort basis CLP-significant m… |
| 1.3.6.1.4.1.4874.2.2.8.1.3.5.1.3 | ColumnusdAtmSubIfVccTrafficShapingTagging | read-create | current | Specifies whether or not CLP0 cells should be tagged for SCR policing (VBR.3 conformance). Applicable only for VBR circuits. |
| 1.3.6.1.4.1.4874.2.2.8.1.3.5.1.4 | ColumnusdAtmSubIfVccTrafficShapingPoliceObserve | read-create | current | Specifies whether of not no policing action is to be taken (note the double negative; if true(1) then no policing action will be taken; if false(2) then polici… |
| 1.3.6.1.4.1.4874.2.2.8.1.3.5.1.5 | ColumnusdAtmSubIfVccTrafficShapingPacketShaping | read-create | current | Specifies whether of not to shape output traffic on a packet boundary. |
| 1.3.6.1.4.1.4874.2.2.8.1.3.6 | TableusdAtmSubIfSvcConfigTable | not-accessible | current | This table contains entries for extending the usdAtmSubIfTable to configure switched virtual connection (SVC)on the subinterfaces. |
| 1.3.6.1.4.1.4874.2.2.8.1.3.6.1 | RowusdAtmSubIfSvcConfigEntry | not-accessible | current | Each entry provides configuration parameters for an ATM SVC on the subinterface. |
| 1.3.6.1.4.1.4874.2.2.8.1.3.6.1.1 | ColumnusdAtmSubIfSvcRowStatus | read-create | current | Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndG… |
| 1.3.6.1.4.1.4874.2.2.8.1.3.6.1.2 | ColumnusdAtmSubIfSvcConfigDestAtmAddress | read-create | current | Specifies the destination ATM NSAP address of the circuit. |
| 1.3.6.1.4.1.4874.2.2.8.1.3.6.1.3 | ColumnusdAtmSubIfSvcConfigCircuitType | read-create | current | Specifies the encapsulation used by the circuit to carry IP datagrams. Encapsulations are as specified in RFC1483 Multiprotocol Interconnect over ATM. |
| 1.3.6.1.4.1.4874.2.2.8.1.3.6.1.4 | ColumnusdAtmSubIfSvcConfigServiceCategory | read-create | current | Service category for this circuit: ubr Unspecified Bit Rate (best effort). ubrPcr Unspecified Bit Rate with Peak Cell Rate limit. nrtVbr Non-RealTime Variable … |
| 1.3.6.1.4.1.4874.2.2.8.1.3.6.1.5 | ColumnusdAtmSubIfSvcConfigPcr | read-create | current | Peak Cell Rate, in kilo-bits per second (kbps), of this circuit. |
| 1.3.6.1.4.1.4874.2.2.8.1.3.6.1.6 | ColumnusdAtmSubIfSvcConfigScr | read-create | current | Sustained Cell Rate, in kilo-bits per second (kbps), of this circuit. |
| 1.3.6.1.4.1.4874.2.2.8.1.3.6.1.7 | ColumnusdAtmSubIfSvcConfigMbs | read-create | current | Maximum Burst Size, in cells, of this circuit. |
| 1.3.6.1.4.1.4874.2.2.8.1.3.6.1.8 | ColumnusdAtmSubIfSvcConfigCdvt | read-create | current | Specify the network Cell Delay Variation Tolerance. |
| 1.3.6.1.4.1.4874.2.2.8.1.3.6.1.9 | ColumnusdAtmSubIfSvcConfigClp0 | read-create | current | Specify that only CLP0 cells are to be policed according to the traffic contract. CLP1 cells are forwarded on a best-effort basis CLP-significant model for (VB… |
| 1.3.6.1.4.1.4874.2.2.8.1.3.6.1.10 | ColumnusdAtmSubIfSvcConfigTagging | read-create | current | Specify that CLP0 cells should be tagged for SCR policing (VBR.3 conformance). |
| 1.3.6.1.4.1.4874.2.2.8.1.3.6.1.11 | ColumnusdAtmSubIfSvcConfigObserve | read-create | current | Specify that no policing action is to be taken; only counters are incremented. |
| 1.3.6.1.4.1.4874.2.2.8.1.3.6.1.12 | ColumnusdAtmSubIfSvcConfigPacketDiscard | read-create | current | Enable early packet Discard for this circuit. |
| 1.3.6.1.4.1.4874.2.2.8.1.4 | NodeusdAtmNbma | |||
| 1.3.6.1.4.1.4874.2.2.8.1.4.1 | TableusdAtmNbmaMapTable | not-accessible | current | This table contains entries for ATM NBMA maps. |
| 1.3.6.1.4.1.4874.2.2.8.1.4.1.1 | RowusdAtmNbmaMapEntry | not-accessible | current | Each entry describes the characteristics of an ATM NBMA map. |
| 1.3.6.1.4.1.4874.2.2.8.1.4.1.1.1 | ColumnusdAtmNbmaMapName | not-accessible | current | The NBMA map name. |
| 1.3.6.1.4.1.4874.2.2.8.1.4.1.1.2 | ColumnusdAtmNbmaMapVcd | not-accessible | current | An integer identifier for the ATM circuit, used in conjunction with the command-line interface. The value must be unique among VCs configured on the same ATM i… |
| 1.3.6.1.4.1.4874.2.2.8.1.4.1.1.3 | ColumnusdAtmNbmaMapIpAddress | read-create | current | The IP address associated with this entry. |
| 1.3.6.1.4.1.4874.2.2.8.1.4.1.1.4 | ColumnusdAtmNbmaMapVpi | read-only | current | The VPI identifier of the ATM circuit. |
| 1.3.6.1.4.1.4874.2.2.8.1.4.1.1.5 | ColumnusdAtmNbmaMapVci | read-only | current | The VCI identifier of the ATM circuit. |
| 1.3.6.1.4.1.4874.2.2.8.1.4.1.1.6 | ColumnusdAtmNbmaMapIfIndex | read-only | current | The ifIndex of the ATM major interface associated with this entry. The value of this object will be zero when the map is not applied to an interface. |
| 1.3.6.1.4.1.4874.2.2.8.1.4.1.1.7 | ColumnusdAtmNbmaMapBroadcast | read-create | current | The broadcast enable/disable setting for this entry. The value true(1) enable broadcast support; disable(2) disabled broadcast support for this entry. |
| 1.3.6.1.4.1.4874.2.2.8.1.4.1.1.8 | ColumnusdAtmNbmaMapRowStatus | read-create | current | Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndG… |
| 1.3.6.1.4.1.4874.2.2.8.1.4.2 | TableusdAtmNbmaMapListTable | not-accessible | current | This table contains entries for ATM NBMA map lists. |
| 1.3.6.1.4.1.4874.2.2.8.1.4.2.1 | RowusdAtmNbmaMapListEntry | not-accessible | current | Each entry describes the characteristics of an ATM NBMA map. |
| 1.3.6.1.4.1.4874.2.2.8.1.4.2.1.1 | ColumnusdAtmNbmaMapListName | not-accessible | current | The NBMA Map List name. |
| 1.3.6.1.4.1.4874.2.2.8.1.4.2.1.2 | ColumnusdAtmNbmaMapListRowStatus | read-create | current | Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndG… |
| 1.3.6.1.4.1.4874.2.2.8.1.5 | NodeusdAtmPing | |||
| 1.3.6.1.4.1.4874.2.2.8.1.5.1 | NodeusdAtmPingTestTypes | |||
| 1.3.6.1.4.1.4874.2.2.8.1.5.1.1 | IdentityusdAtmPingTestOamSeg | current | This identifies an OAM Ping (multiple loopbacks) Test on a VPL, VPC, VCL, or VCC termination point, using segment OAM cells. The test type must have appended t… | |
| 1.3.6.1.4.1.4874.2.2.8.1.5.1.2 | IdentityusdAtmPingTestOamE2E | current | This identifies an OAM Ping (multiple loopbacks) Test on a VPL, VPC, VCL, or VCC termination point, using end-to-end OAM cells. | |
| 1.3.6.1.4.1.4874.2.2.8.1.5.2 | TableusdAtmVpPingTable | not-accessible | current | This table contains entries for extending the ATM-FORUM-SNMP-M4-MIB atmM4VpTestTable to do ping (multiple loopback) type testing. |
| 1.3.6.1.4.1.4874.2.2.8.1.5.2.1 | RowusdAtmVpPingEntry | not-accessible | current | Each entry describes the characteristics, status and results of the most recent ATM ping test. |
| 1.3.6.1.4.1.4874.2.2.8.1.5.2.1.1 | ColumnusdAtmVpPingProbeCount | read-write | current | The number of ping probes (OAM cells) to be sent to complete the test. |
| 1.3.6.1.4.1.4874.2.2.8.1.5.2.1.2 | ColumnusdAtmVpPingTimeOut | read-write | current | Specifies the time-out value, in seconds, for a remote ping operation. |
| 1.3.6.1.4.1.4874.2.2.8.1.5.2.1.3 | ColumnusdAtmVpPingCtlTrapGeneration | read-write | current | The value of this object determines when and if to generate a notification for this entry: testCompletion(0) - Generate a usdPingTestCompleted notification. Th… |
| 1.3.6.1.4.1.4874.2.2.8.1.5.2.1.4 | ColumnusdAtmVpPingSentProbes | read-only | current | The number of ping probes (OAM cells) that have been sent thus far for this test. The value of this object MUST be set to zero when the atmfM4VpTestStatus obje… |
| 1.3.6.1.4.1.4874.2.2.8.1.5.2.1.5 | ColumnusdAtmVpPingProbeResponses | read-only | current | The number of ping responses that have been received thus far for this test. The value of this object MUST be set to zero when the atmfM4VpTestStatus object tr… |
| 1.3.6.1.4.1.4874.2.2.8.1.5.2.1.6 | ColumnusdAtmVpPingStartTime | read-only | current | The time (sysUpTime) when the test started. |
| 1.3.6.1.4.1.4874.2.2.8.1.5.2.1.7 | ColumnusdAtmVpPingMinRtt | read-only | current | The shortest round-trip-time (RTT) for the pings that have received responses. The value of this object MUST be set to zero when the atmfM4VpTestStatus object … |
| 1.3.6.1.4.1.4874.2.2.8.1.5.2.1.8 | ColumnusdAtmVpPingMaxRtt | read-only | current | The longest round-trip-time (RTT) for the pings that have received responses. The value of this object MUST be set to zero when the atmfM4VpTestStatus object t… |
| 1.3.6.1.4.1.4874.2.2.8.1.5.2.1.9 | ColumnusdAtmVpPingAverageRtt | read-only | current | The average round-trip-time (RTT) for all the pings that have received responses. The value of this object MUST be set to zero when the atmfM4VpTestStatus obje… |
| 1.3.6.1.4.1.4874.2.2.8.1.5.3 | TableusdAtmVcPingTable | not-accessible | current | This table contains entries for extending the ATM-FORUM-SNMP-M4-MIB atmM4VcTestTable to do ping (multiple loopback) type testing. |
| 1.3.6.1.4.1.4874.2.2.8.1.5.3.1 | RowusdAtmVcPingEntry | not-accessible | current | Each entry describes the characteristics, status and results of the most recent ATM ping test. |
| 1.3.6.1.4.1.4874.2.2.8.1.5.3.1.1 | ColumnusdAtmVcPingProbeCount | read-write | current | The number of ping probes (OAM cells) to be sent to complete the test. |
| 1.3.6.1.4.1.4874.2.2.8.1.5.3.1.2 | ColumnusdAtmVcPingTimeOut | read-write | current | Specifies the time-out value, in seconds, for a remote ping operation. |
| 1.3.6.1.4.1.4874.2.2.8.1.5.3.1.3 | ColumnusdAtmVcPingCtlTrapGeneration | read-write | current | The value of this object determines when and if to generate a notification for this entry: testCompletion(0) - Generate a usdPingTestCompleted notification. Th… |
| 1.3.6.1.4.1.4874.2.2.8.1.5.3.1.4 | ColumnusdAtmVcPingSentProbes | read-only | current | The number of ping probes (OAM cells) that have been sent thus far for this test. The value of this object MUST be set to zero when the atmfM4VcTestStatus obje… |
| 1.3.6.1.4.1.4874.2.2.8.1.5.3.1.5 | ColumnusdAtmVcPingProbeResponses | read-only | current | The number of ping responses that have been received thus far for this test. The value of this object MUST be set to zero when the atmfM4VcTestStatus object tr… |
| 1.3.6.1.4.1.4874.2.2.8.1.5.3.1.6 | ColumnusdAtmVcPingStartTime | read-only | current | The time (sysUpTime) when the test started. |
| 1.3.6.1.4.1.4874.2.2.8.1.5.3.1.7 | ColumnusdAtmVcPingMinRtt | read-only | current | The shortest round-trip-time (RTT) for the pings that have received responses. The value of this object MUST be set to zero when the atmfM4VcTestStatus object … |
| 1.3.6.1.4.1.4874.2.2.8.1.5.3.1.8 | ColumnusdAtmVcPingMaxRtt | read-only | current | The longest round-trip-time (RTT) for the pings that have received responses. The value of this object MUST be set to zero when the atmfM4VcTestStatus object t… |
| 1.3.6.1.4.1.4874.2.2.8.1.5.3.1.9 | ColumnusdAtmVcPingAverageRtt | read-only | current | The average round-trip-time (RTT) for all the pings that have received responses. The value of this object MUST be set to zero when the atmfM4VcTestStatus obje… |
| 1.3.6.1.4.1.4874.2.2.8.3 | NodeusdAtmTraps | |||
| 1.3.6.1.4.1.4874.2.2.8.3.0 | NodeusdAtmTrapPrefix | |||
| 1.3.6.1.4.1.4874.2.2.8.3.0.1 | NotificationusdAtmVpPingTestCompleted | current | Generated at the completion of a AtmfM4VpTest when the corresponding usdAtmVpPingCtlTrapGeneration object has the testCompletion(0) bit set. | |
| 1.3.6.1.4.1.4874.2.2.8.3.0.2 | NotificationusdAtmVcPingTestCompleted | current | Generated at the completion of a AtmfM4VcTest when the corresponding usdAtmVcPingCtlTrapGeneration object has the testCompletion(0) bit set. | |
| 1.3.6.1.4.1.4874.2.2.8.4 | NodeusdAtmConformance | |||
| 1.3.6.1.4.1.4874.2.2.8.4.1 | NodeusdAtmCompliances | |||
| 1.3.6.1.4.1.4874.2.2.8.4.1.1 | ComplianceusdAtmCompliance | obsolete | Obsolete compliance statement for entities which implement the Unisphere ATM MIB. This statement became obsolete when support was added for NBMA map lists and … | |
| 1.3.6.1.4.1.4874.2.2.8.4.1.2 | ComplianceusdAtmCompliance2 | obsolete | Obsolete compliance statement for entities which implement the Unisphere ATM MIB. This statement became obsolete when support was added for traffic shapping on… | |
| 1.3.6.1.4.1.4874.2.2.8.4.1.3 | ComplianceusdAtmCompliance3 | obsolete | Obsolete compliance statement for entities which implement the Unisphere ATM MIB. This statement became obsolete when support was added for connection admissio… | |
| 1.3.6.1.4.1.4874.2.2.8.4.1.4 | ComplianceusdAtmCompliance4 | obsolete | Obsolete compliance statement for entities which implement the Unisphere ATM MIB. This statement became obsolete when ATM SVC, CAC used bandwidth and sub-inter… | |
| 1.3.6.1.4.1.4874.2.2.8.4.1.5 | ComplianceusdAtmCompliance5 | current | The compliance statement for entities which implement the Unisphere ATM MIB. | |
| 1.3.6.1.4.1.4874.2.2.8.4.2 | NodeusdAtmGroups | |||
| 1.3.6.1.4.1.4874.2.2.8.4.2.1 | GroupusdAtmGroup | obsolete | Obsolete collection of objects providing management of ATM interfaces in a Unisphere product. This group became obsolete when the usdAtmIfMapGroup object was a… | |
| 1.3.6.1.4.1.4874.2.2.8.4.2.2 | GroupusdAtmAal5Group | current | A collection of objects providing management of AAL5 interfaces in a Unisphere product. | |
| 1.3.6.1.4.1.4874.2.2.8.4.2.3 | GroupusdAtmSubIfGroup | obsolete | Obsolete collection of objects providing management of ATM subinterfaces in a Unisphere product. This group became obsolete when usdAtmSubIfNbma, usdAtmSubIfIn… | |
| 1.3.6.1.4.1.4874.2.2.8.4.2.4 | GroupusdAtmVpTunnelGroup | current | A collection of objects providing management of VP tunnels in a Unisphere product. | |
| 1.3.6.1.4.1.4874.2.2.8.4.2.5 | GroupusdAtmNbmaMapGroup | current | A collection of object providing management of NBMA in a Unisphere product. | |
| 1.3.6.1.4.1.4874.2.2.8.4.2.6 | GroupusdAtmSubIfGroup2 | obsolete | Obsolete collection of objects providing management of ATM subinterfaces in a Unisphere product. This group became obsolete when usdAtmSubIfAddress was added. | |
| 1.3.6.1.4.1.4874.2.2.8.4.2.7 | GroupusdAtmVpPingControlGroup | current | A collection of object providing management of ATM VPL Ping testing in a Unisphere product. | |
| 1.3.6.1.4.1.4874.2.2.8.4.2.8 | GroupusdAtmVcPingControlGroup | current | A collection of object providing management of ATM VCL Ping testing in a Unisphere product. | |
| 1.3.6.1.4.1.4874.2.2.8.4.2.9 | GroupusdAtmPingTrapGroup | current | A collection of notifications supporting ATM Ping testing in a Unisphere product. | |
| 1.3.6.1.4.1.4874.2.2.8.4.2.10 | GroupusdAtmGroup2 | obsolete | Obsolete collection of objects providing management of ATM interfaces in a Unisphere product. This group became obsolete when support was added for connection … | |
| 1.3.6.1.4.1.4874.2.2.8.4.2.11 | GroupusdAtmTrafficShapingGroup | current | A collection of objects providing management of ATM traffic shaping in a Unisphere product. | |
| 1.3.6.1.4.1.4874.2.2.8.4.2.12 | GroupusdAtmGroup3 | obsolete | Obsolete collection of objects providing management of ATM interfaces in a Unisphere product. This group became obsolete when support was added for connection … | |
| 1.3.6.1.4.1.4874.2.2.8.4.2.13 | GroupusdAtmGroup4 | current | A collection of objects providing management of ATM interfaces in a Unisphere product. | |
| 1.3.6.1.4.1.4874.2.2.8.4.2.14 | GroupusdAtmSvcGroup | current | A collection of objects providing management of ATM SVC interfaces in a Unisphere product. | |
| 1.3.6.1.4.1.4874.2.2.8.4.2.15 | GroupusdAtmSubIfGroup3 | current | A collection of objects providing management of ATM subinterfaces in a Unisphere product. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| UsdAtmNbmaMapName | OCTET STRING (SIZE(1..32)) | current | An administratively assigned map name. Represents textual information taken from the NVT ASCII character set. The name must be unique per system. |
| UsdAtmNbmaMapNameOrNull | OCTET STRING (SIZE(0..32)) | current | An administratively assigned map name. Represents textual information taken from the NVT ASCII character set. The name must be unique per system. Differs from UsdAtmNbmaMapName in that it permits a zero-length string. |