Unisphere-Data-DS1-MIB
37 objects
The DS1/E1 MIB for the Unisphere enterprise. This MIB contains managed objects to supplement those found in RFC1406 DS1/E1 MIB.
Imported Objects
| IF-MIB | ifIndex InterfaceIndexOrZero |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DisplayString RowStatus |
| Unisphere-Data-MIBs | usDataMibs |
| Unisphere-Data-TC | UsdNextIfIndex UsdTimeSlotMap |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4874.2.2.5 | IdentityusdDs1MIB | The DS1/E1 MIB for the Unisphere enterprise. This MIB contains managed objects to supplement those found in RFC1406 DS1/E1 MIB. | ||
| 1.3.6.1.4.1.4874.2.2.5.1 | NodeusdDs1Objects | |||
| 1.3.6.1.4.1.4874.2.2.5.1.1 | TableusdDsx1ConfigTable | not-accessible | current | This table contains entries for DS1/E1 interfaces present in the system. |
| 1.3.6.1.4.1.4874.2.2.5.1.1.1 | RowusdDsx1ConfigEntry | not-accessible | current | Each entry describes the characteristics of an DS1/E1 interface. |
| 1.3.6.1.4.1.4874.2.2.5.1.1.1.1 | ColumnusdDsx1TimeSlotMap | read-only | current | A bitmap representing the timeslots on the DS1/E1 interface that have been allocated for service. For channelized DS1/E1, set bits reflect the union of timeslo… |
| 1.3.6.1.4.1.4874.2.2.5.1.1.1.2 | ColumnusdDsx1Ds1ChannelNumber | read-create | current | This variable represents the channel number of the DS1/E1 on its parent DS3/E3. A value of 0 indicates this DS1/E1 does not have a parent DS3/E3. |
| 1.3.6.1.4.1.4874.2.2.5.1.1.1.3 | ColumnusdDsx1Capabilities | read-only | current | A value which indicates the set of capabilities of the DS1/E1 interface. The value is a sum. This sum initially takes the value zero. Then, for each capability… |
| 1.3.6.1.4.1.4874.2.2.5.1.1.1.4 | ColumnusdDsx1Mode | read-create | current | This variable represents the DS1/E1 interface mode. The value of the usdDsx1Capabilities object for the DS1/E1 interface indicates the valid set of values for … |
| 1.3.6.1.4.1.4874.2.2.5.1.1.1.5 | ColumnusdDsx1LineBuildOutCapabilities | read-only | current | A value which indicates the set of line build out capabilities of the DS1/E1 interface. The value is a sum. This sum initially takes the value zero. Then, for … |
| 1.3.6.1.4.1.4874.2.2.5.1.1.1.6 | ColumnusdDsx1LineBuildOutType | read-create | current | This variable represents the configured line build out type of the DS1/E1 interface. The value of the usdDsx1LineBuildOutCapabilities object for the DS1/E1 int… |
| 1.3.6.1.4.1.4874.2.2.5.1.1.1.7 | ColumnusdDsx1LineAttenuation | read-create | current | This variable represents the configured line attenuation of the DS1/E1 interface. Note that the value of this object only takes effect when the value of the us… |
| 1.3.6.1.4.1.4874.2.2.5.1.1.1.8 | ColumnusdDsx1LineLength | read-create | current | This variable represents the length of the DS1/E1 line in meters. Note that the value of this object only takes effect when the value of the usdDsx1LineBuildOu… |
| 1.3.6.1.4.1.4874.2.2.5.1.1.1.9 | ColumnusdDsx1LowerIfIndex | read-create | current | The ifIndex of the interface over which this Dsx1 interface is to be layered. A value of zero indicates no layering. An implementation may choose to require th… |
| 1.3.6.1.4.1.4874.2.2.5.1.1.1.10 | ColumnusdDsx1RowStatus | read-create | current | Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndG… |
| 1.3.6.1.4.1.4874.2.2.5.1.1.1.11 | ColumnusdDsx1SendCode | read-create | current | This variable indicates what type of code is being sent across the DS1 interface by the device. |
| 1.3.6.1.4.1.4874.2.2.5.1.1.1.12 | ColumnusdDsx1YellowAlarm | read-create | current | This bitmap indicates the yellow alarm settings, and is the sum of the capabilities. |
| 1.3.6.1.4.1.4874.2.2.5.1.1.1.13 | ColumnusdDsx1RemoteLoopback | read-create | current | This variable indicates the remote loopback setting. |
| 1.3.6.1.4.1.4874.2.2.5.1.1.1.14 | ColumnusdDsx1FdlCarrier | read-create | current | Specifies the interface is used in carrier environment. |
| 1.3.6.1.4.1.4874.2.2.5.1.1.1.15 | ColumnusdDsx1FdlEic | read-create | current | This is the equipment identification code. |
| 1.3.6.1.4.1.4874.2.2.5.1.1.1.16 | ColumnusdDsx1FdlLic | read-create | current | This is the location identification code. |
| 1.3.6.1.4.1.4874.2.2.5.1.1.1.17 | ColumnusdDsx1FdlFic | read-create | current | This is the frame identification code. |
| 1.3.6.1.4.1.4874.2.2.5.1.1.1.18 | ColumnusdDsx1FdlUnit | read-create | current | This is the unit identification code. |
| 1.3.6.1.4.1.4874.2.2.5.1.1.1.19 | ColumnusdDsx1FdlPfi | read-create | current | This is the facility identification code. |
| 1.3.6.1.4.1.4874.2.2.5.1.1.1.20 | ColumnusdDsx1FdlPort | read-create | current | This is the equipment port number. |
| 1.3.6.1.4.1.4874.2.2.5.1.1.1.21 | ColumnusdDsx1FdlGenerator | read-create | current | This is the generator number. |
| 1.3.6.1.4.1.4874.2.2.5.1.2 | ScalarusdDs1NextIfIndex | read-only | current | Coordinate ifIndex value allocation for entries in usdDsx1ConfigTable. A GET of this object returns the next available ifIndex value to be used to create an en… |
| 1.3.6.1.4.1.4874.2.2.5.4 | NodeusdDs1Conformance | |||
| 1.3.6.1.4.1.4874.2.2.5.4.1 | NodeusdDs1Compliances | |||
| 1.3.6.1.4.1.4874.2.2.5.4.1.1 | ComplianceusdDs1Compliance | obsolete | Obsolete compliance statement for entities which implement the Unisphere DS1/E1 MIB. This statement became obsolete when new objects were added. | |
| 1.3.6.1.4.1.4874.2.2.5.4.1.2 | ComplianceusdDs1Compliance1 | obsolete | Obsolete compliance statement for entities which implement the Unisphere DS1/E1 MIB. This statement became obsolete when dynamic DS1 interface support was adde… | |
| 1.3.6.1.4.1.4874.2.2.5.4.1.3 | ComplianceusdDs1Compliance2 | obsolete | Obsolete compliance statement for entities which implement the Unisphere DS1/E1 MIB. This statement became obsolete when FDL support was added. | |
| 1.3.6.1.4.1.4874.2.2.5.4.1.4 | ComplianceusdDs1Compliance3 | current | The compliance statement for entities which implement the Unisphere DS1/E1 MIB. | |
| 1.3.6.1.4.1.4874.2.2.5.4.2 | NodeusdDs1Groups | |||
| 1.3.6.1.4.1.4874.2.2.5.4.2.1 | GroupusdDs1Group | obsolete | Obsolete collection of objects providing management of DS1/E1 interfaces in a Unisphere product. This group became obsolete when new objects where added to the… | |
| 1.3.6.1.4.1.4874.2.2.5.4.2.2 | GroupusdDs1Group1 | obsolete | Obsolete collection of objects providing management of DS1/E1 interfaces in a Unisphere product. This group became obsolete when dynamic DS1 interface support … | |
| 1.3.6.1.4.1.4874.2.2.5.4.2.3 | GroupusdDs1Group2 | obsolete | Obsolete collection of objects providing management of DS1/E1 interfaces in a Unisphere product. This group became obsolete when FDL support was added. | |
| 1.3.6.1.4.1.4874.2.2.5.4.2.4 | GroupusdDs1Group3 | current | A collection of objects providing management of DS1/E1 interfaces in a Unisphere product. |