MIB Viewer

Unisphere-Data-DS3-MIB

49 objects
The DS3 MIB for the Unisphere Networks Inc. enterprise.
OIDNameAccessStatusDescription
1.3.6.1.4.1.4874.2.2.4IdentityusdDs3MIBThe DS3 MIB for the Unisphere Networks Inc. enterprise.
1.3.6.1.4.1.4874.2.2.4.1NodeusdDs3Objects
1.3.6.1.4.1.4874.2.2.4.1.1TableusdDsx3ConfigTablenot-accessiblecurrentThis table contains entries for DS3/E3 interfaces present in the system.
1.3.6.1.4.1.4874.2.2.4.1.1.1RowusdDsx3ConfigEntrynot-accessiblecurrentEach entry describes the characteristics of an DS3/E3 interface.
1.3.6.1.4.1.4874.2.2.4.1.1.1.1ColumnusdDsx3LineLengthread-createcurrentThe length of the DS3/E3 line in meters. This objects provides information for line build out circuitry. This object is only useful if the interface has config…
1.3.6.1.4.1.4874.2.2.4.1.1.1.2ColumnusdDsx3LineTyperead-createcurrentThis variable indicates the variety of DS3 C-bit or E3 application implementing this interface. The type of interface affects the interpretation of the usage a…
1.3.6.1.4.1.4874.2.2.4.1.1.1.3ColumnusdDsx3CellScramblerConfigread-createcurrentThis variable indicates the state of the ATM cell scrambler for interfaces which support ATM over DS3 or E3. For interfaces which do not support ATM, this obje…
1.3.6.1.4.1.4874.2.2.4.1.1.1.4ColumnusdDsx3Channelizationread-createcurrentThe channelization setting for this DS3 interface; true(1) indicates channelization, false(2) indicates no channelization.
1.3.6.1.4.1.4874.2.2.4.1.1.1.5ColumnusdDsx3InterfaceTyperead-createcurrentThe DS3 interface type setting.
1.3.6.1.4.1.4874.2.2.4.1.1.1.6ColumnusdDsx3Applicationread-createcurrentThe interface application setting.
1.3.6.1.4.1.4874.2.2.4.1.1.1.7ColumnusdDsx3Ds3Channelread-createcurrentThe DS3 channel setting. The range of channel settings depends on the line rate of the underlying interface.
1.3.6.1.4.1.4874.2.2.4.1.1.1.8ColumnusdDsx3LowerIfIndexread-createcurrentThe ifIndex of the interface over which this DS3 interface is to be layered. A value of zero indicates no layering. An implementation may choose to require tha…
1.3.6.1.4.1.4874.2.2.4.1.1.1.9ColumnusdDsx3RowStatusread-createcurrentControls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support setting the following values only: cr…
1.3.6.1.4.1.4874.2.2.4.1.1.1.10ColumnusdDsx3Ds3DsuModeread-createcurrentThe DSU configuration setting for this entry.
1.3.6.1.4.1.4874.2.2.4.1.1.1.11ColumnusdDsx3Ds3BandwidthLimitread-createcurrentThe DSU bandwidth configuration for this entry.
1.3.6.1.4.1.4874.2.2.4.1.1.1.12ColumnusdDsx3Ds3DsuScrambleModeread-createcurrentThe DSU scramble mode setting for this entry.
1.3.6.1.4.1.4874.2.2.4.1.1.1.13ColumnusdDsx3MdlCarrierread-createcurrentSpecifies the interface is used in carrier environment.
1.3.6.1.4.1.4874.2.2.4.1.1.1.14ColumnusdDsx3MdlTransmitread-createcurrentSpecifies transmission enabling.
1.3.6.1.4.1.4874.2.2.4.1.1.1.15ColumnusdDsx3MdlEicread-createcurrentThis is the equipment identification code.
1.3.6.1.4.1.4874.2.2.4.1.1.1.16ColumnusdDsx3MdlLicread-createcurrentThis is the location identification code.
1.3.6.1.4.1.4874.2.2.4.1.1.1.17ColumnusdDsx3MdlFicread-createcurrentThis is the frame identification code.
1.3.6.1.4.1.4874.2.2.4.1.1.1.18ColumnusdDsx3MdlUnitread-createcurrentThis is the unit identification code.
1.3.6.1.4.1.4874.2.2.4.1.1.1.19ColumnusdDsx3MdlPfiread-createcurrentThis is the facility identification code to send in the MDL path message.
1.3.6.1.4.1.4874.2.2.4.1.1.1.20ColumnusdDsx3MdlPortread-createcurrentThis is the equipment port number to send in the MDL idle signal message.
1.3.6.1.4.1.4874.2.2.4.1.1.1.21ColumnusdDsx3MdlGeneratorread-createcurrentThis is the generator number to send in the MDL test signal message.
1.3.6.1.4.1.4874.2.2.4.1.2ScalarusdDs3NextIfIndexread-onlycurrentCoordinate ifIndex value allocation for entries in usdDsx3ConfigTable. A GET of this object returns the next available ifIndex value to be used to create an en…
1.3.6.1.4.1.4874.2.2.4.1.3TableusdDsx3FarEndCurrentTablenot-accessiblecurrentThis table contains entries for DS3/E3 interfaces present in the system.
1.3.6.1.4.1.4874.2.2.4.1.3.1RowusdDsx3FarEndCurrentEntrynot-accessiblecurrentEach entry describes the characteristics of an DS3/E3 interface.
1.3.6.1.4.1.4874.2.2.4.1.3.1.1ColumnusdDsx3FarEndCurrentInvalidSecondsread-onlycurrentThe counter associated with the number of Invalid Seconds encountered by a DS3/E3 interface in the current 15 minute interval.
1.3.6.1.4.1.4874.2.2.4.1.4TableusdDsx3FarEndIntervalTablenot-accessiblecurrentThis table contains entries for DS3/E3 interfaces present in the system.
1.3.6.1.4.1.4874.2.2.4.1.4.1RowusdDsx3FarEndIntervalEntrynot-accessiblecurrentEach entry describes the characteristics of an DS3/E3 interface.
1.3.6.1.4.1.4874.2.2.4.1.4.1.1ColumnusdDsx3FarEndIntervalInvalidSecondsread-onlycurrentThe counter associated with the number of Invalid Seconds encountered by a DS3/E3 interface in one of the previous 96 individual 15 minute intervals.
1.3.6.1.4.1.4874.2.2.4.1.5TableusdDsx3FarEndTotalTablenot-accessiblecurrentThis table contains entries for DS3/E3 interfaces present in the system.
1.3.6.1.4.1.4874.2.2.4.1.5.1RowusdDsx3FarEndTotalEntrynot-accessiblecurrentEach entry describes the characteristics of an DS3/E3 interface.
1.3.6.1.4.1.4874.2.2.4.1.5.1.1ColumnusdDsx3FarEndTotalInvalidSecondsread-onlycurrentThe counter associated with the number of Invalid Seconds encountered by a DS3/E3 interface in the previous 24 hour interval.
1.3.6.1.4.1.4874.2.2.4.4NodeusdDs3Conformance
1.3.6.1.4.1.4874.2.2.4.4.1NodeusdDs3Compliances
1.3.6.1.4.1.4874.2.2.4.4.1.1ComplianceusdDs3ComplianceobsoleteObsolete compliance statement for entities which implement the Unisphere DS3/E3 MIB. This statement became obsolete when support was added for line type and ce…
1.3.6.1.4.1.4874.2.2.4.4.1.2ComplianceusdDs3Compliance2obsoleteObsolete compliance statement for entities which implement the Unisphere DS3/E3 MIB. This statement became obsolete when support was added for DSU objects.
1.3.6.1.4.1.4874.2.2.4.4.1.3ComplianceusdDs3Compliance3obsoleteObsolete compliance statement for entities which implement the Unisphere DS3/E3 MIB. This statement became obsolete when support was added for dynamic DS3 inte…
1.3.6.1.4.1.4874.2.2.4.4.1.4ComplianceusdDs3Compliance4obsoleteObsolete compliance statement for entities which implement the Unisphere DS3/E3 MIB. This statement became obsolete when far end invalid seconds objects and mo…
1.3.6.1.4.1.4874.2.2.4.4.1.5ComplianceusdDs3Compliance5currentThe compliance statement for entities which implement the Unisphere DS3/E3 MIB.
1.3.6.1.4.1.4874.2.2.4.4.2NodeusdDs3Groups
1.3.6.1.4.1.4874.2.2.4.4.2.1GroupusdDs3GroupobsoleteObsolete collection of objects providing management of DS3/E3 interfaces in a Unisphere product. This group became obsolete when support was added for line typ…
1.3.6.1.4.1.4874.2.2.4.4.2.2GroupusdDs3Group2obsoleteObsolete collection of objects providing management of DS3/E3 interfaces in a Unisphere product. This group became obsolete when support was added for DSU conf…
1.3.6.1.4.1.4874.2.2.4.4.2.3GroupusdDs3Group3obsoleteObsolete collection of objects providing management of DS3/E3 interfaces in a Unisphere product. This group became obsolete when support was added for dynamic …
1.3.6.1.4.1.4874.2.2.4.4.2.4GroupusdDs3Group4obsoleteObsolete collection of objects providing management of DS3/E3 interfaces in a Unisphere product. This group became obsolete when more configuration objects wer…
1.3.6.1.4.1.4874.2.2.4.4.2.5GroupusdDs3Group5currentA collection of objects providing management of DS3/E3 interfaces in a Unisphere product.
1.3.6.1.4.1.4874.2.2.4.4.2.6GroupusdDs3FarEndGroupcurrentA collection of objects providing remote statistics information applicable to DS3 interfaces in a Unisphere product.