Unisphere-Data-ERX-System-MIB
139 objects
MIB objects for managing ERX Edge Router systems.
Imported Objects
| IF-MIB | InterfaceIndexOrZero |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | DateAndTime DisplayString TEXTUAL-CONVENTION TruthValue |
| Unisphere-Data-MIBs | usDataMibs |
| Unisphere-Data-TC | UsdEnable |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4874.2.2.17 | IdentityusdERXSysMIB | MIB objects for managing ERX Edge Router systems. | ||
| 1.3.6.1.4.1.4874.2.2.17.0 | NodeusdERXSysTrap | |||
| 1.3.6.1.4.1.4874.2.2.17.0.1 | NotificationusdERXSysSlotOperStatusChange | current | Reports a status change for a slot. This trap is generated on a transition into a stable state (online or disabled) or on a transition out of online. | |
| 1.3.6.1.4.1.4874.2.2.17.0.2 | NotificationusdERXSysPowerStatusChange | current | Reports a change in the status of a power element. | |
| 1.3.6.1.4.1.4874.2.2.17.0.3 | NotificationusdERXSysTempFanStatusChange | current | Reports a transition between the three states of the fan subsystem. When the fan subsystem transitions to the failed state the thermal protection hold off time… | |
| 1.3.6.1.4.1.4874.2.2.17.0.4 | NotificationusdERXSysTempStatusChange | current | Reports a change in the temperature status. When the status transitions to the tooHigh state the system enters thermal protection mode. | |
| 1.3.6.1.4.1.4874.2.2.17.0.5 | NotificationusdERXSysHighMemUtil | current | Report system memory utilization has met the conditions of usdERXSysHighMemUtilThreshold. | |
| 1.3.6.1.4.1.4874.2.2.17.0.6 | NotificationusdERXSysAbatedMemUtil | current | Reports system memory utilization has met the conditions of usdERXSysAbatedMemUtilThreshold. | |
| 1.3.6.1.4.1.4874.2.2.17.0.7 | NotificationusdERXSysTempProtectionStatusChange | current | Notification about changes in the state of Thermal Protection. This notification is sent when the tempProtectionStatus changes. It is also sent when the holdOf… | |
| 1.3.6.1.4.1.4874.2.2.17.1 | NodeusdERXSysObjects | |||
| 1.3.6.1.4.1.4874.2.2.17.1.1 | NodeusdERXSysGeneral | |||
| 1.3.6.1.4.1.4874.2.2.17.1.1.1 | ScalarusdERXSysChassisRev | read-only | current | Chassis revision number. If unknown, the value 255 is reported. |
| 1.3.6.1.4.1.4874.2.2.17.1.1.2 | ScalarusdERXSysSwVersion | read-only | current | Currently executing operational software version. |
| 1.3.6.1.4.1.4874.2.2.17.1.1.3 | ScalarusdERXSysSwBuildDate | read-only | current | Build date of currently executing operational software version. |
| 1.3.6.1.4.1.4874.2.2.17.1.1.4 | ScalarusdERXSysRevertControl | read-write | current | Global revert control: off Disable global revert. immediate All slots are to revert immediately (asap). timeOfDay All slots are to revert at time specified by … |
| 1.3.6.1.4.1.4874.2.2.17.1.1.5 | ScalarusdERXSysRevertTimeOfDay | read-write | current | The number of seconds past midnight on any given day at which time reverts are allowed to occur. This object must be set concurrently with usdERXSysRevertContr… |
| 1.3.6.1.4.1.4874.2.2.17.1.1.6 | ScalarusdERXSysBootConfigControl | read-write | current | System boot configuration control: file Revert to configuration settings specified by usdERXSysBootConfigFile. The usdERXSysBootConfigControl and usdERXSysBoot… |
| 1.3.6.1.4.1.4874.2.2.17.1.1.7 | ScalarusdERXSysBootBackupConfigControl | read-write | current | System boot backup configuration control: file Revert to backup configuration settings specified by usdERXSysBootBackupConfigFile. The usdERXSysBootBackupConfi… |
| 1.3.6.1.4.1.4874.2.2.17.1.1.8 | ScalarusdERXSysBootForceBackupControl | read-write | current | System boot force backup control: off Do not force revert to backup settings. on Do force revert to backup settings. |
| 1.3.6.1.4.1.4874.2.2.17.1.1.9 | ScalarusdERXSysBootAutoRevertControl | read-write | current | System boot auto revert control: default Use default auto-revert tolerances. never Never auto-revert to backup. set Set auto-revert settings at specified toler… |
| 1.3.6.1.4.1.4874.2.2.17.1.1.10 | ScalarusdERXSysBootAutoRevertCountTolerance | read-write | current | The auto-revert reboot count tolerance. This object cannot be set to zero, but may contain a zero value when the control is set to never(1). |
| 1.3.6.1.4.1.4874.2.2.17.1.1.11 | ScalarusdERXSysBootAutoRevertTimeTolerance | read-write | current | The auto-revert reboot time tolerance. This object cannot be set to zero, but will contain a zero value when the control is set to never(1). |
| 1.3.6.1.4.1.4874.2.2.17.1.1.12 | ScalarusdERXSysBootReleaseFile | read-write | current | The local boot release file name, with extension .rel. |
| 1.3.6.1.4.1.4874.2.2.17.1.1.13 | ScalarusdERXSysBootConfigFile | read-write | current | The local boot configuration file name, with extension .cnf. The usdERXSysBootConfigControl and usdERXSysBootConfigFile must be specified together in the same … |
| 1.3.6.1.4.1.4874.2.2.17.1.1.14 | ScalarusdERXSysBootBackupReleaseFile | read-write | current | The local backup boot release file name, with extension .rel. |
| 1.3.6.1.4.1.4874.2.2.17.1.1.15 | ScalarusdERXSysBootBackupConfigFile | read-write | current | The local backup boot configuration file name, with extension .cnf. The usdERXSysBootBackupConfigControl and usdERXSysBootBackupConfigFile must be specified to… |
| 1.3.6.1.4.1.4874.2.2.17.1.1.16 | ScalarusdERXSysAdminTimingSource | read-write | current | The administrative timing source for the ERX system. The ERX periodically monitors the status of three timing sources, primary, secondary and tertiary. If the … |
| 1.3.6.1.4.1.4874.2.2.17.1.1.17 | ScalarusdERXSysOperTimingSource | read-only | current | The operations timing source for the ERX system. The ERX periodically monitors the status of three timing sources, primary, secondary and tertiary. If the syst… |
| 1.3.6.1.4.1.4874.2.2.17.1.1.18 | ScalarusdERXSysTimingDisableAutoUpgrade | read-write | current | This object controls the automatic timing selector upgrade. Setting this object to true(1) will prevent automatic upgrade to the next highest timing selector. … |
| 1.3.6.1.4.1.4874.2.2.17.1.1.19 | TableusdERXSysTimingSelectorTable | not-accessible | current | Table of system timing selectors. |
| 1.3.6.1.4.1.4874.2.2.17.1.1.19.1 | RowusdERXSysTimingSelectorEntry | not-accessible | current | A table entry describing a system timing selector. |
| 1.3.6.1.4.1.4874.2.2.17.1.1.19.1.1 | ColumnusdERXSysTimingSelectorIndex | not-accessible | current | The system timing selector index associated with this entry. |
| 1.3.6.1.4.1.4874.2.2.17.1.1.19.1.2 | ColumnusdERXSysTimingSourceType | read-write | current | The system timing source type for this entry. This object must be present when setting either the usdERXSysTimingSourceIfIndex or usdERXSysTimingSourceLine obj… |
| 1.3.6.1.4.1.4874.2.2.17.1.1.19.1.3 | ColumnusdERXSysTimingSourceIfIndex | read-write | current | The ifIndex of the interface selected as the system timing source. The usdERXSysTimingSourceType object must be set to timingInterfaceIfIndex(1) otherwise sett… |
| 1.3.6.1.4.1.4874.2.2.17.1.1.19.1.4 | ColumnusdERXSysTimingSourceLine | read-write | current | The line type timing source for this entry. The usdRxSysTimingSourceType object must be set to timingLine(3) for the agent to accept a set to this object. |
| 1.3.6.1.4.1.4874.2.2.17.1.1.19.1.5 | ColumnusdERXSysTimingStatus | read-only | current | The status associated with this system timing selector. |
| 1.3.6.1.4.1.4874.2.2.17.1.1.20 | ScalarusdERXSysMemUtilPct | read-only | current | Percentage of system memory utilization. A value of -1 indicates the utilization is unknown. |
| 1.3.6.1.4.1.4874.2.2.17.1.1.21 | ScalarusdERXSysMemCapacity | read-only | current | The total memory capacity of the system. |
| 1.3.6.1.4.1.4874.2.2.17.1.1.22 | ScalarusdERXSysHighMemUtilThreshold | read-write | current | The value of system memory utilization, where if reached for the first time will generate a high memory utilization event to the management entity on this syst… |
| 1.3.6.1.4.1.4874.2.2.17.1.1.23 | ScalarusdERXSysAbatedMemUtilThreshold | read-write | current | The value of system memory utilization that is used to determine when to generate an abated memory utilization event notification to the management entity on t… |
| 1.3.6.1.4.1.4874.2.2.17.1.1.24 | ScalarusdERXSysMemUtilTrapEnable | read-write | current | Controls the sending of system memory utilization events. Setting the value of this object to true(1) will cause system memory utilization event notification, … |
| 1.3.6.1.4.1.4874.2.2.17.1.2 | NodeusdERXSysFabric | |||
| 1.3.6.1.4.1.4874.2.2.17.1.2.1 | ScalarusdERXSysFabricSpeed | read-only | current | Speed of switching fabric, in gigabits per second. |
| 1.3.6.1.4.1.4874.2.2.17.1.2.2 | ScalarusdERXSysFabricRev | read-only | current | Fabric revision number. If unknown, the value 255 is reported. |
| 1.3.6.1.4.1.4874.2.2.17.1.3 | NodeusdERXSysNvs | |||
| 1.3.6.1.4.1.4874.2.2.17.1.3.1 | ScalarusdERXSysNvsStatus | read-only | current | Status of non-volatile storage (NVS): notPresent NVS is not installed. writeProtected NVS is write-protected. volumeError Status poll of NVS failed. nearCapaci… |
| 1.3.6.1.4.1.4874.2.2.17.1.3.2 | ScalarusdERXSysNvsCapacity | read-only | current | Capacity of NVS storage in megabytes. |
| 1.3.6.1.4.1.4874.2.2.17.1.3.3 | ScalarusdERXSysNvsUtilPct | read-only | current | Percentage of NVS storage used. A value of -1 indicates NVS utilization is unknown. |
| 1.3.6.1.4.1.4874.2.2.17.1.4 | NodeusdERXSysSlot | |||
| 1.3.6.1.4.1.4874.2.2.17.1.4.1 | ScalarusdERXSysSlotCount | read-only | current | The number of slots in the system. |
| 1.3.6.1.4.1.4874.2.2.17.1.4.2 | TableusdERXSysSlotTable | not-accessible | current | Table of system slots. |
| 1.3.6.1.4.1.4874.2.2.17.1.4.2.1 | RowusdERXSysSlotEntry | not-accessible | current | A table entry describing contents of a system slot. |
| 1.3.6.1.4.1.4874.2.2.17.1.4.2.1.1 | ColumnusdERXSysSlotIndex | not-accessible | current | Slot number. NOTE: Slot numbers are zero-based. |
| 1.3.6.1.4.1.4874.2.2.17.1.4.2.1.2 | ColumnusdERXSysSlotDescr | read-only | current | Textual description of the card. |
| 1.3.6.1.4.1.4874.2.2.17.1.4.2.1.3 | ColumnusdERXSysSlotCurrentCardType | read-only | current | Type of card actually in the slot. This could be different from the type reported in usdERXSysSlotExpectedCardType, in which case it may be necessary to set us… |
| 1.3.6.1.4.1.4874.2.2.17.1.4.2.1.4 | ColumnusdERXSysSlotRev | read-only | current | Revision number of the card. If unknown, the value 255 is reported. |
| 1.3.6.1.4.1.4874.2.2.17.1.4.2.1.5 | ColumnusdERXSysSlotAdminStatus | read-write | current | Exerts administrative control to enable/disable the slot. |
| 1.3.6.1.4.1.4874.2.2.17.1.4.2.1.6 | ColumnusdERXSysSlotOperStatus | read-only | current | Status of the card. |
| 1.3.6.1.4.1.4874.2.2.17.1.4.2.1.7 | ColumnusdERXSysSlotDisableReason | read-only | current | Indicates the condition causing the slot to be disabled: none Value when card is not disabled. unknown Unknown reason for disablement. assessing The slot conte… |
| 1.3.6.1.4.1.4874.2.2.17.1.4.2.1.8 | ColumnusdERXSysSlotExpectedCardType | read-only | current | Type of card associated with this slot through prior presence. After the card is removed, this association persists (and inhibits operation of a different card… |
| 1.3.6.1.4.1.4874.2.2.17.1.4.2.1.9 | ColumnusdERXSysSlotControl | read-write | current | Administrative control of this slot: noOperation Setting this value has no effect. flush Flushes configuration associated with a card type that previously occu… |
| 1.3.6.1.4.1.4874.2.2.17.1.4.2.1.10 | ColumnusdERXSysSlotCpuUtilPct | read-only | current | Percentage of CPU utilization. A value of -1 indicates the utilization is unknown. |
| 1.3.6.1.4.1.4874.2.2.17.1.4.2.1.11 | ColumnusdERXSysSlotMemUtilPct | read-only | current | Percentage of memory utilization. A value of -1 indicates the utilization is unknown. |
| 1.3.6.1.4.1.4874.2.2.17.1.4.2.1.12 | ColumnusdERXSysSlotIoaPresent | read-only | current | Indicates whether the card's corresponding I/O adapter is present. |
| 1.3.6.1.4.1.4874.2.2.17.1.4.2.1.13 | ColumnusdERXSysSlotPortCount | read-only | current | Number of physical ports for the EXPECTED card type for this slot. NOTE: In event of a card mismatch in this slot, the port count for the CURRENT card in this … |
| 1.3.6.1.4.1.4874.2.2.17.1.4.2.1.14 | ColumnusdERXSysSlotLastChange | read-only | current | The value of sysUpTime when the value of usdERXSysSlotOperStatus last changed. |
| 1.3.6.1.4.1.4874.2.2.17.1.4.2.1.15 | ColumnusdERXSysSlotRedundancyLockout | read-write | current | Exerts administrative control to enable/disable Redundancy protection for the slot. |
| 1.3.6.1.4.1.4874.2.2.17.1.4.2.1.16 | ColumnusdERXSysSlotRedundancyGroupId | read-only | current | Identifies the Redundancy group as derived from hardware settings. |
| 1.3.6.1.4.1.4874.2.2.17.1.4.2.1.17 | ColumnusdERXSysSlotSpareServer | read-only | current | True only if the line card in slot is a spare redundant server. |
| 1.3.6.1.4.1.4874.2.2.17.1.4.2.1.18 | ColumnusdERXSysSlotAssociatedSlot | read-only | current | If the module is a primary card and the spare is acting on its behalf, then the value of this object is the slot number of the associated spare. If the module … |
| 1.3.6.1.4.1.4874.2.2.17.1.4.2.1.19 | ColumnusdERXSysSlotRevertControl | read-write | current | Per-slot revert control: off Disable slot revert. immediate Slot is to revert immediately (asap). timeAndDate Slot is to revert at time specified by usdRxSysSl… |
| 1.3.6.1.4.1.4874.2.2.17.1.4.2.1.20 | ColumnusdERXSysSlotRedundancyRevertTime | read-write | current | The date and time associated with the timeAndDate (delayed) revert operation. |
| 1.3.6.1.4.1.4874.2.2.17.1.4.2.1.21 | ColumnusdERXSysSlotBootReleaseFile | read-write | current | The local boot release file name for this slot, with extension .rel. |
| 1.3.6.1.4.1.4874.2.2.17.1.4.2.1.22 | ColumnusdERXSysSlotBootBackupReleaseFile | read-write | current | The local backup boot release file name for this slot, with extension .rel. |
| 1.3.6.1.4.1.4874.2.2.17.1.4.2.1.23 | ColumnusdERXSysSlotSerialNumber | read-only | current | The serial number of the card in this slot. |
| 1.3.6.1.4.1.4874.2.2.17.1.4.2.1.24 | ColumnusdERXSysSlotAssemblyPartNumber | read-only | current | The part number of the card in this slot. |
| 1.3.6.1.4.1.4874.2.2.17.1.4.2.1.25 | ColumnusdERXSysSlotAssemblyRev | read-only | current | The revision number of the card assembly in this slot. |
| 1.3.6.1.4.1.4874.2.2.17.1.4.2.1.26 | ColumnusdERXSysSlotIoaSerialNumber | read-only | current | The serial number of the I/O adaptor on the card in this slot. |
| 1.3.6.1.4.1.4874.2.2.17.1.4.2.1.27 | ColumnusdERXSysSlotIoaAssemblyPartNumber | read-only | current | The part number of the I/O adaptor on the card in this slot. |
| 1.3.6.1.4.1.4874.2.2.17.1.4.2.1.28 | ColumnusdERXSysSlotIoaAssemblyRev | read-only | current | The revision number of the I/O adaptor assembly on the card in this slot. |
| 1.3.6.1.4.1.4874.2.2.17.1.5 | NodeusdERXSysPort | |||
| 1.3.6.1.4.1.4874.2.2.17.1.5.1 | TableusdERXSysPortTable | not-accessible | current | Table of system physical ports. The information in this table reflects the ports for the EXPECTED card type in each slot; in event of a card mismatch, this tab… |
| 1.3.6.1.4.1.4874.2.2.17.1.5.1.1 | RowusdERXSysPortEntry | not-accessible | current | A table entry describing a physical port of the system. |
| 1.3.6.1.4.1.4874.2.2.17.1.5.1.1.1 | ColumnusdERXSysPortIndex | not-accessible | current | Port number of this physical port, relative to the slot in which it resides. Each physical port is uniquely distinguished by its slot/port pair. NOTE: Port num… |
| 1.3.6.1.4.1.4874.2.2.17.1.5.1.1.2 | ColumnusdERXSysPortDescr | read-only | current | Textual description of this port. |
| 1.3.6.1.4.1.4874.2.2.17.1.5.1.1.3 | ColumnusdERXSysPortType | read-only | current | Type of the physical port: unknown Unknown port type. eth Ethernet. ct3 Channelized T3. oc3c OC-3c (SONET/SDH). ut3Atm Unchannelized T3 (ATM service). ut3Frame… |
| 1.3.6.1.4.1.4874.2.2.17.1.5.1.1.4 | ColumnusdERXSysPortIfIndex | read-only | current | The ifIndex of the Interfaces MIB ifTable entry corresponding to this physical port; if zero, the ifIndex is unknown or does not exist. |
| 1.3.6.1.4.1.4874.2.2.17.1.6 | NodeusdERXSysPower | |||
| 1.3.6.1.4.1.4874.2.2.17.1.6.1 | TableusdERXSysPowerTable | not-accessible | current | Table of system power elements. |
| 1.3.6.1.4.1.4874.2.2.17.1.6.1.1 | RowusdERXSysPowerEntry | not-accessible | current | A table entry describing status of a system power element. |
| 1.3.6.1.4.1.4874.2.2.17.1.6.1.1.1 | ColumnusdERXSysPowerIndex | not-accessible | current | Arbitrary integer index to distinguish entries in this table. |
| 1.3.6.1.4.1.4874.2.2.17.1.6.1.1.2 | ColumnusdERXSysPowerDescr | read-only | current | Textual description of this power element. |
| 1.3.6.1.4.1.4874.2.2.17.1.6.1.1.3 | ColumnusdERXSysPowerStatus | read-only | current | The status of the power element: inactive No power available from this element. active Power available from this element. |
| 1.3.6.1.4.1.4874.2.2.17.1.7 | NodeusdERXSysTemperature | |||
| 1.3.6.1.4.1.4874.2.2.17.1.7.1 | ScalarusdERXSysTempFanStatus | read-only | current | Status of fan subsystem. ok All components operational warning The fan subsystem has a non-critical failure. failed The fan subsystem has a critical failure, o… |
| 1.3.6.1.4.1.4874.2.2.17.1.7.2 | TableusdERXSysTempTable | not-accessible | current | Table of system temperature sensors. Sensors are distributed across the chassis, at least one sensor per populated slot. |
| 1.3.6.1.4.1.4874.2.2.17.1.7.2.1 | RowusdERXSysTempEntry | not-accessible | current | A table entry describing status of a temperature sensor. |
| 1.3.6.1.4.1.4874.2.2.17.1.7.2.1.1 | ColumnusdERXSysTempIndex | not-accessible | current | Arbitrary integer index to distinguish sensors associated with the same chassis slot. |
| 1.3.6.1.4.1.4874.2.2.17.1.7.2.1.2 | ColumnusdERXSysTempDescr | read-only | current | Textual description of this sensor. |
| 1.3.6.1.4.1.4874.2.2.17.1.7.2.1.3 | ColumnusdERXSysTempStatus | read-only | current | The status of a temperature sensor: unknown unknown failed failed tooLow below nominal range nominal within nominal range tooHigh above nominal range tooLowWar… |
| 1.3.6.1.4.1.4874.2.2.17.1.7.2.1.4 | ColumnusdERXSysTempValue | read-only | current | The temperature measured by this sensor in degrees Celsius. This measurement is valid only if the value of the corresponding usdERXSysTempStatus is nominal. |
| 1.3.6.1.4.1.4874.2.2.17.1.7.3 | ScalarusdERXSysTempProtectionStatus | read-only | current | Thermal protection status: monitoring monitoring inHoldOff hold off time has begun activatedHoldOffExpired hold off time has expired, the system is in thermal … |
| 1.3.6.1.4.1.4874.2.2.17.1.7.4 | ScalarusdERXSysTempProtectionHoldOffTime | read-only | current | The time, in seconds, before the system enters thermal protection mode after a critical fan subsystem failure is detected. |
| 1.3.6.1.4.1.4874.2.2.17.1.7.5 | ScalarusdERXSysTempProtectionHoldOffTimeRemaining | read-only | current | The time remaining, in seconds, before the system enters thermal protection mode while the thermal protection status is set to inHoldOff. The value decrements … |
| 1.3.6.1.4.1.4874.2.2.17.1.8 | NodeusdERXSysSubsystem | |||
| 1.3.6.1.4.1.4874.2.2.17.1.8.1 | TableusdERXSysSubsystemTable | not-accessible | current | Table of subsystems. |
| 1.3.6.1.4.1.4874.2.2.17.1.8.1.1 | RowusdERXSysSubsystemEntry | not-accessible | current | A table entry containing information pertaining to a subsystem. |
| 1.3.6.1.4.1.4874.2.2.17.1.8.1.1.1 | ColumnusdERXSysSubsystemIndex | not-accessible | current | Subsystem number. |
| 1.3.6.1.4.1.4874.2.2.17.1.8.1.1.2 | ColumnusdERXSysSubsystemName | read-only | current | The name of the subsystem. |
| 1.3.6.1.4.1.4874.2.2.17.1.8.1.1.3 | ColumnusdERXSysSubsystemControl | read-write | current | Administrative control of this subsystem: noOperation Setting this value has no effect. noBoot Deconfigure primary release file for the subsystem. noBootBackup… |
| 1.3.6.1.4.1.4874.2.2.17.1.8.1.1.4 | ColumnusdERXSysSubsystemBootReleaseFile | read-write | current | The local boot release file name for this subsystem, with extension .rel. |
| 1.3.6.1.4.1.4874.2.2.17.1.8.1.1.5 | ColumnusdERXSysSubsystemBootBackupReleaseFile | read-write | current | The local backup boot release file name for this subsystem, with extension .rel. |
| 1.3.6.1.4.1.4874.2.2.17.2 | NodeusdERXSysConformance | |||
| 1.3.6.1.4.1.4874.2.2.17.2.1 | NodeusdERXSysCompliances | |||
| 1.3.6.1.4.1.4874.2.2.17.2.1.1 | ComplianceusdERXSysCompliance | obsolete | Obsolete compliance statement for entities which implement the ERX System MIB. This compliance statement became obsolete when new slot information objects were… | |
| 1.3.6.1.4.1.4874.2.2.17.2.1.2 | ComplianceusdERXSysCompliance1 | obsolete | Obsolete compliance statement for entities which implement the ERX System MIB. This compliance statement became obsolete when the timing group was added. | |
| 1.3.6.1.4.1.4874.2.2.17.2.1.3 | ComplianceusdERXSysCompliance2 | obsolete | Obsolete compliance statement for entities which implement the ERX System MIB. This compliance statement became obsolete when new memory information objects an… | |
| 1.3.6.1.4.1.4874.2.2.17.2.1.4 | ComplianceusdERXSysCompliance3 | obsolete | Obsolete compliance statement for entities which implement the ERX System MIB. This compliance statement became obsolete when new system temperature informatio… | |
| 1.3.6.1.4.1.4874.2.2.17.2.1.5 | ComplianceusdERXSysCompliance4 | current | The compliance statement for entities which implement the ERX System MIB. | |
| 1.3.6.1.4.1.4874.2.2.17.2.2 | NodeusdERXSysGroups | |||
| 1.3.6.1.4.1.4874.2.2.17.2.2.1 | GroupusdERXSysGroup | obsolete | Obsolete collection of management objects pertaining to system capabilities in a Juniper product. This group became obsolete when new slot information objects … | |
| 1.3.6.1.4.1.4874.2.2.17.2.2.2 | GroupusdERXSysNotifyGroup | obsolete | Obsolete collection of management notifications pertaining to system operations in a Juniper product. This group became obsolete when new memory threshold noti… | |
| 1.3.6.1.4.1.4874.2.2.17.2.2.3 | GroupusdERXSysGeneralGroup | obsolete | Obsolete collection of management objects pertaining to general system capabilities in a Juniper product. This group became obsolete when new memory management… | |
| 1.3.6.1.4.1.4874.2.2.17.2.2.4 | GroupusdERXSysFabricGroup | current | A collection of management objects pertaining to system fabric capabilities in a Juniper product. | |
| 1.3.6.1.4.1.4874.2.2.17.2.2.5 | GroupusdERXSysNvsGroup | current | A collection of management objects pertaining to non-volitile storage subsystem capabilities in a Juniper product. | |
| 1.3.6.1.4.1.4874.2.2.17.2.2.6 | GroupusdERXSysSlotGroup | current | A collection of management objects pertaining to slot-specific system capabilities in a Juniper product. | |
| 1.3.6.1.4.1.4874.2.2.17.2.2.7 | GroupusdERXSysPortGroup | current | A collection of management objects pertaining to port-related system capabilities in a Juniper product. | |
| 1.3.6.1.4.1.4874.2.2.17.2.2.8 | GroupusdERXSysPowerGroup | current | A collection of management objects pertaining to the power subsystem capabilities in a Juniper product. | |
| 1.3.6.1.4.1.4874.2.2.17.2.2.9 | GroupusdERXSysTemperatureGroup | obsolete | Obsolete collection of management objects pertaining to system temperature monitoring capabilities in a Juniper product. This group became obsolete when temper… | |
| 1.3.6.1.4.1.4874.2.2.17.2.2.10 | GroupusdERXSysSubsystemGroup | current | A collection of management objects pertaining to subsystem capabilities in a Juniper product. | |
| 1.3.6.1.4.1.4874.2.2.17.2.2.11 | GroupusdERXSysTimingGroup | current | A collection of management objects pertaining to system timing capabilities in a Juniper product. | |
| 1.3.6.1.4.1.4874.2.2.17.2.2.12 | GroupusdERXSysGeneralGroup2 | current | A collection of management objects pertaining to general system capabilities in a Juniper product. | |
| 1.3.6.1.4.1.4874.2.2.17.2.2.13 | GroupusdERXSysNotifyGroup2 | obsolete | Obsolete collection of management notifications pertaining to system operations in a Juniper product. This group became obsolete when the tempProtectionStatusC… | |
| 1.3.6.1.4.1.4874.2.2.17.2.2.14 | GroupusdERXSysTemperatureGroup2 | current | A collection of management objects pertaining to system temperature monitoring capabilities in a Juniper product. | |
| 1.3.6.1.4.1.4874.2.2.17.2.2.15 | GroupusdERXSysNotifyGroup3 | current | A collection of management notifications pertaining to system operations in a Juniper product. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| UsdSysCardType | INTEGER { unknown(0), srp(1), ct3(2), oc3(3), ut3Atm(4), ut3Frame(5), ue3Atm(6), ue3Frame(7), ce1(8), ct1(9), dpfe(10), oc12Pos(11), oc12Atm(12), oc3Pos(13), oc3Atm(14), ge(15), fe8(16), oc3oc12Pos(17), oc3oc12Atm(18), coc3oc12(19), coc3(20), coc12(21), oc12Server(22), hssi(23), geFe(24), ct3P12(25), v35(26), ut3f12(27), ue3f12(28), coc12F3(29), coc3F3(30), cocxF3(31) } | current | The type of card in a system slot: unknown Unknown type. srp Switch/Route Processor. ct3 Channelized T3. oc3 OC-3 (SONET/SDH). ut3Atm Unchannelized T3 (ATM service). ut3Frame Unchannelized T3 (Frame service). ue3Atm Unc… |
| UsdTimingSelector | INTEGER (1..4) | current | The system timing selector. A value of 1 corresponds to the primary timing selector. A value of 2 corresponds to the secondary timing selector. A value of 3 corresponds to the tertiary timing selector. A value of 4 indi… |
| UsdTimingSourceLineType | INTEGER { timingSourceLineUndefined(0), timingSourceLineE1PortA(1), timingSourceLineE1PortB(2), timingSourceLineT1PortA(3), timingSourceLineT1PortB(4) } | current | The set of choices for line type timing. |
| UsdTimingSourceType | INTEGER { timingInterfaceIfIndex(1), timingInternal(2), timingLine(3) } | current | The set of selectable timing source types. The timing source type determines the timing source parameters. |