Unisphere-Data-FRAME-RELAY-MIB
85 objects
The Frame Relay MIB for the Unisphere Networks Inc. enterprise.
Imported Objects
| FRAME-RELAY-DTE-MIB | DLCI |
| IF-MIB | InterfaceIndex InterfaceIndexOrZero |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Integer32 MODULE-IDENTITY OBJECT-TYPE TimeTicks |
| SNMPv2-TC | RowStatus TimeStamp |
| Unisphere-Data-MIBs | usDataMibs |
| Unisphere-Data-TC | UsdNextIfIndex |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4874.2.2.10 | IdentityusdFrameRelayMIB | The Frame Relay MIB for the Unisphere Networks Inc. enterprise. | ||
| 1.3.6.1.4.1.4874.2.2.10.1 | NodeusdFrObjects | |||
| 1.3.6.1.4.1.4874.2.2.10.1.1 | NodeusdFrIfLayer | |||
| 1.3.6.1.4.1.4874.2.2.10.1.1.1 | ScalarusdFrNextIfIndex | read-only | current | Coordinate ifIndex value allocation for entries in usdFrDlcmiTable. A GET of this object returns the next available ifIndex value to be used to create an entry… |
| 1.3.6.1.4.1.4874.2.2.10.1.1.2 | TableusdFrDlcmiTable | not-accessible | current | The Parameters for the Data Link Connection Management Interface for the frame relay service on this interface. This table represents a superset of functionali… |
| 1.3.6.1.4.1.4874.2.2.10.1.1.2.1 | RowusdFrDlcmiEntry | not-accessible | current | The Parameters for a particular Data Link Connection Management Interface. Creating/deleting entries in this table causes corresponding entries for be created/… |
| 1.3.6.1.4.1.4874.2.2.10.1.1.2.1.1 | ColumnusdFrDlcmiIfIndex | read-only | current | The ifIndex value of the corresponding ifEntry. |
| 1.3.6.1.4.1.4874.2.2.10.1.1.2.1.2 | ColumnusdFrDlcmiState | read-create | current | This variable states which Data Link Connection Management scheme is active (and by implication, what DLCI it uses) on the Frame Relay interface. |
| 1.3.6.1.4.1.4874.2.2.10.1.1.2.1.3 | ColumnusdFrDlcmiAddress | read-create | current | This variable states which address format is in use on the Frame Relay interface. |
| 1.3.6.1.4.1.4874.2.2.10.1.1.2.1.4 | ColumnusdFrDlcmiAddressLen | read-create | current | This variable states the address length in octets. In the case of Q922 format, the length indicates the entire length of the address including the control port… |
| 1.3.6.1.4.1.4874.2.2.10.1.1.2.1.5 | ColumnusdFrDlcmiPollingInterval | read-create | current | This is the number of seconds between successive status enquiry messages sent by the DTE. Pertains to DTE/NNI operation only. This parameter can be reconfigure… |
| 1.3.6.1.4.1.4874.2.2.10.1.1.2.1.6 | ColumnusdFrDlcmiFullEnquiryInterval | read-create | current | Number of status enquiry intervals that pass before issuance of a full status enquiry message. Pertains to DTE/NNI operation only. This parameter can be reconf… |
| 1.3.6.1.4.1.4874.2.2.10.1.1.2.1.7 | ColumnusdFrDlcmiErrorThreshold | read-create | current | The minimum number of errors that must be observed within the number of events specified by usdFrDlcmiMonitoredEvents, to declare the interface down. 'error' i… |
| 1.3.6.1.4.1.4874.2.2.10.1.1.2.1.8 | ColumnusdFrDlcmiMonitoredEvents | read-create | current | The number of status polling intervals over which the error threshold is counted. For example, if within 'MonitoredEvents' number of events the station receive… |
| 1.3.6.1.4.1.4874.2.2.10.1.1.2.1.9 | ColumnusdFrDlcmiMaxSupportedVCs | read-create | current | The maximum number of Virtual Circuits allowed for this interface. Usually dictated by the Frame Relay network. In response to a SET, if a value less than zero… |
| 1.3.6.1.4.1.4874.2.2.10.1.1.2.1.10 | ColumnusdFrDlcmiMulticast | read-create | current | This indicates whether the Frame Relay interface is using a multicast service. |
| 1.3.6.1.4.1.4874.2.2.10.1.1.2.1.11 | ColumnusdFrDlcmiStatus | read-only | current | This indicates the status of the Frame Relay interface as determined by the performance of the dlcmi. If no dlcmi is running, the Frame Relay interface will st… |
| 1.3.6.1.4.1.4874.2.2.10.1.1.2.1.12 | ColumnusdFrDlcmiRowStatus | read-create | current | Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndG… |
| 1.3.6.1.4.1.4874.2.2.10.1.1.2.1.13 | ColumnusdFrDlcmiLowerIfIndex | read-create | current | The ifIndex of an interface over which this Frame Relay interface is to be layered. A value of zero indicates no layering. An implementation may choose to requ… |
| 1.3.6.1.4.1.4874.2.2.10.1.1.2.1.14 | ColumnusdFrDlcmiRole | read-create | current | Specifies the role this interface assumes with respect to the remote end. When acting as a DTE, the following objects are not relevant: usdFrDlcmiDcePollingInt… |
| 1.3.6.1.4.1.4874.2.2.10.1.1.2.1.15 | ColumnusdFrDlcmiDcePollingInterval | read-create | current | The number of seconds within which a DCE expects to receive a Status Enquiry from the DTE. This value corresponds to the T392 timer. Pertains to DCE/NNI operat… |
| 1.3.6.1.4.1.4874.2.2.10.1.1.2.1.16 | ColumnusdFrDlcmiDceErrorThreshold | read-create | current | The minimum number of errors that must be observed within the number of events specified by usdFrDlcmiDceMonitoredEvents, to declare the interface down. 'error… |
| 1.3.6.1.4.1.4874.2.2.10.1.1.2.1.17 | ColumnusdFrDlcmiDceMonitoredEvents | read-create | current | The number of DCE polling intervals over which accumulated errors are counted against the threshold specified in usdFrDlcmiDceErrorThreshold. If, within this n… |
| 1.3.6.1.4.1.4874.2.2.10.1.1.3 | TableusdFrDlcmiStatsTable | not-accessible | current | The statistics for the Data Link Connection Management Interface for the frame relay service on this interface. |
| 1.3.6.1.4.1.4874.2.2.10.1.1.3.1 | RowusdFrDlcmiStatsEntry | not-accessible | current | The statistics for a particular Data Link Connection Management Interface. Statistics are not relevant while the usdFrDlcmiState has the value 'noLmiConfigured… |
| 1.3.6.1.4.1.4874.2.2.10.1.1.3.1.1 | ColumnusdFrDlcmiStatsDteEnquiries | read-only | current | Number of Status Enquiries sent (as DTE). |
| 1.3.6.1.4.1.4874.2.2.10.1.1.3.1.2 | ColumnusdFrDlcmiStatsDteFullEnquiries | read-only | current | Number of Full Enquiries sent (as DTE). |
| 1.3.6.1.4.1.4874.2.2.10.1.1.3.1.3 | ColumnusdFrDlcmiStatsDteEnquiryResponses | read-only | current | Number of Status Enquiry responses received (as DTE). |
| 1.3.6.1.4.1.4874.2.2.10.1.1.3.1.4 | ColumnusdFrDlcmiStatsDteFullEnquiryResponses | read-only | current | Number of Full Enquiry responses received (as DTE). |
| 1.3.6.1.4.1.4874.2.2.10.1.1.3.1.5 | ColumnusdFrDlcmiStatsDteAsyncUpdates | read-only | current | Number of Asynchronous Updates received (as DTE). |
| 1.3.6.1.4.1.4874.2.2.10.1.1.3.1.6 | ColumnusdFrDlcmiStatsDteUnknownRxMessages | read-only | current | Number of unknown messages received (as DTE). |
| 1.3.6.1.4.1.4874.2.2.10.1.1.3.1.7 | ColumnusdFrDlcmiStatsDteLossOfSequences | read-only | current | Number of times a discontinuity in sequence numbering of received messages was detected (as DTE). |
| 1.3.6.1.4.1.4874.2.2.10.1.1.3.1.8 | ColumnusdFrDlcmiStatsDteNoResponseTimeouts | read-only | current | Number of timer expirations awaiting a Status message (as DTE). |
| 1.3.6.1.4.1.4874.2.2.10.1.1.3.1.9 | ColumnusdFrDlcmiStatsDceEnquiries | read-only | current | Number of Status Enquiries received (as DCE.) |
| 1.3.6.1.4.1.4874.2.2.10.1.1.3.1.10 | ColumnusdFrDlcmiStatsDceFullEnquiries | read-only | current | Number of Full Enquiries received (as DCE). |
| 1.3.6.1.4.1.4874.2.2.10.1.1.3.1.11 | ColumnusdFrDlcmiStatsDceEnquiryResponses | read-only | current | Number of Status Enquiry responses sent (as DCE). |
| 1.3.6.1.4.1.4874.2.2.10.1.1.3.1.12 | ColumnusdFrDlcmiStatsDceFullEnquiryResponses | read-only | current | Number of Full Enquiry responses sent (as DCE). |
| 1.3.6.1.4.1.4874.2.2.10.1.1.3.1.13 | ColumnusdFrDlcmiStatsDceAsyncUpdates | read-only | current | Number of Asynchronous Updates sent (as DCE). |
| 1.3.6.1.4.1.4874.2.2.10.1.1.3.1.14 | ColumnusdFrDlcmiStatsDceUnknownRxMessages | read-only | current | Number of unknown messages received (as DCE). |
| 1.3.6.1.4.1.4874.2.2.10.1.1.3.1.15 | ColumnusdFrDlcmiStatsDceLossOfSequences | read-only | current | Number of times a discontinuity in sequence numbering of received messages was detected (as DCE). |
| 1.3.6.1.4.1.4874.2.2.10.1.1.3.1.16 | ColumnusdFrDlcmiStatsDceNoResponseTimeouts | read-only | current | Number of timer expirations awaiting a Status Enquiry (as DCE). |
| 1.3.6.1.4.1.4874.2.2.10.1.1.3.1.17 | ColumnusdFrDlcmiStatsDiscontinuityTime | read-only | current | Value of sysUpTime at the most recent event that caused a discontinuity in the monotonic operation of any of the counters in this entry. Such disruption might … |
| 1.3.6.1.4.1.4874.2.2.10.1.1.4 | TableusdFrCircuitTable | not-accessible | current | A table containing information about specific Data Link Connections (DLC) or virtual circuits. This table mirrors the structure of RFC2115 FRAME-RELAY-DTE-MIB … |
| 1.3.6.1.4.1.4874.2.2.10.1.1.4.1 | RowusdFrCircuitEntry | not-accessible | current | The information regarding a single Data Link Connection. Discontinuities in the counters contained in this table are indicated by the value in usdFrCircuitCrea… |
| 1.3.6.1.4.1.4874.2.2.10.1.1.4.1.1 | ColumnusdFrCircuitIfIndex | not-accessible | current | The ifIndex Value of the ifEntry this virtual circuit is layered onto. |
| 1.3.6.1.4.1.4874.2.2.10.1.1.4.1.2 | ColumnusdFrCircuitDlci | not-accessible | current | The Data Link Connection Identifier for this virtual circuit. |
| 1.3.6.1.4.1.4874.2.2.10.1.1.4.1.3 | ColumnusdFrCircuitState | read-create | current | Indicates whether the particular virtual circuit is operational. In the absence of a Data Link Connection Management Interface, virtual circuit entries (rows) … |
| 1.3.6.1.4.1.4874.2.2.10.1.1.4.1.4 | ColumnusdFrCircuitReceivedFECNs | read-only | current | Number of frames received from the network indicating forward congestion since the virtual circuit was created. This occurs when the remote DTE sets the FECN f… |
| 1.3.6.1.4.1.4874.2.2.10.1.1.4.1.5 | ColumnusdFrCircuitReceivedBECNs | read-only | current | Number of frames received from the network indicating backward congestion since the virtual circuit was created. This occurs when the remote DTE sets the BECN … |
| 1.3.6.1.4.1.4874.2.2.10.1.1.4.1.6 | ColumnusdFrCircuitSentFrames | read-only | current | The number of frames sent from this virtual circuit since it was created. |
| 1.3.6.1.4.1.4874.2.2.10.1.1.4.1.7 | ColumnusdFrCircuitSentOctets | read-only | current | The number of octets sent from this virtual circuit since it was created. Octets counted are the full frame relay header and the payload, but do not include th… |
| 1.3.6.1.4.1.4874.2.2.10.1.1.4.1.8 | ColumnusdFrCircuitReceivedFrames | read-only | current | Number of frames received over this virtual circuit since it was created. |
| 1.3.6.1.4.1.4874.2.2.10.1.1.4.1.9 | ColumnusdFrCircuitReceivedOctets | read-only | current | Number of octets received over this virtual circuit since it was created. Octets counted include the full frame relay header, but do not include the flag chara… |
| 1.3.6.1.4.1.4874.2.2.10.1.1.4.1.10 | ColumnusdFrCircuitCreationTime | read-only | current | The value of sysUpTime when the virtual circuit was created, whether by the Data Link Connection Management Interface or by a SetRequest. |
| 1.3.6.1.4.1.4874.2.2.10.1.1.4.1.11 | ColumnusdFrCircuitLastTimeChange | read-only | current | The value of sysUpTime when last there was a change in the virtual circuit state |
| 1.3.6.1.4.1.4874.2.2.10.1.1.4.1.12 | ColumnusdFrCircuitCommittedBurst | read-create | current | This variable indicates the maximum amount of data, in bits, that the network agrees to transfer under normal conditions, during the measurement interval. |
| 1.3.6.1.4.1.4874.2.2.10.1.1.4.1.13 | ColumnusdFrCircuitExcessBurst | read-create | current | This variable indicates the maximum amount of uncommitted data bits that the network will attempt to deliver over the measurement interval. By default, if not … |
| 1.3.6.1.4.1.4874.2.2.10.1.1.4.1.14 | ColumnusdFrCircuitThroughput | read-create | current | Throughput is the average number of 'Frame Relay Information Field' bits transferred per second across a user network interface in one direction, measured over… |
| 1.3.6.1.4.1.4874.2.2.10.1.1.4.1.15 | ColumnusdFrCircuitMulticast | read-create | current | This indicates whether this VC is used as a unicast VC (i.e. not multicast) or the type of multicast service subscribed to |
| 1.3.6.1.4.1.4874.2.2.10.1.1.4.1.16 | ColumnusdFrCircuitType | read-only | current | Indication of whether the VC was manually created (static), or dynamically created (dynamic) via the data link control management interface. |
| 1.3.6.1.4.1.4874.2.2.10.1.1.4.1.17 | ColumnusdFrCircuitDiscards | read-only | current | The number of inbound frames dropped because of format errors, or because the VC is inactive. |
| 1.3.6.1.4.1.4874.2.2.10.1.1.4.1.18 | ColumnusdFrCircuitReceivedDEs | read-only | current | Number of frames received from the network indicating that they were eligible for discard since the virtual circuit was created. This occurs when the remote DT… |
| 1.3.6.1.4.1.4874.2.2.10.1.1.4.1.19 | ColumnusdFrCircuitSentDEs | read-only | current | Number of frames sent to the network indicating that they were eligible for discard since the virtual circuit was created. This occurs when the local DTE sets … |
| 1.3.6.1.4.1.4874.2.2.10.1.1.4.1.20 | ColumnusdFrCircuitLogicalIfIndex | read-create | current | Normally the same value as frDlcmiIfIndex, but different when an implementation associates a virtual ifEntry with a DLC or set of DLCs in order to associate hi… |
| 1.3.6.1.4.1.4874.2.2.10.1.1.4.1.21 | ColumnusdFrCircuitRowStatus | read-create | current | This object is used to create a new row or modify or destroy an existing row in the manner described in the definition of the RowStatus textual convention. Wri… |
| 1.3.6.1.4.1.4874.2.2.10.1.1.4.1.22 | ColumnusdFrCircuitSentFECNs | read-only | current | Number of frames sent to the network indicating forward congestion since the virtual circuit was created. This occurs when the remote DTE sets the FECN flag, o… |
| 1.3.6.1.4.1.4874.2.2.10.1.1.4.1.23 | ColumnusdFrCircuitSentBECNs | read-only | current | Number of frames sent to the network indicating backward congestion since the virtual circuit was created. This occurs when the remote DTE sets the BECN flag, … |
| 1.3.6.1.4.1.4874.2.2.10.1.2 | NodeusdFrSubIfLayer | |||
| 1.3.6.1.4.1.4874.2.2.10.1.2.1 | ScalarusdFrSubIfNextIfIndex | read-only | current | Coordinate ifIndex value allocation for entries in usdFrSubIfTable. A GET of this object returns the next available ifIndex value to be used to create an entry… |
| 1.3.6.1.4.1.4874.2.2.10.1.2.2 | TableusdFrSubIfTable | not-accessible | current | This table contains entries for Frame Relay Subinterfaces present in the system. |
| 1.3.6.1.4.1.4874.2.2.10.1.2.2.1 | RowusdFrSubIfEntry | not-accessible | current | Each entry describes the characteristics of a Frame Relay Subinterface. Creating/deleting entries in this table causes corresponding entries for be created /de… |
| 1.3.6.1.4.1.4874.2.2.10.1.2.2.1.1 | ColumnusdFrSubIfIndex | not-accessible | current | The ifIndex of the Frame Relay Subinterface. When creating entries in this table, suitable values for this object are determined by reading usdFrSubNextIfIndex. |
| 1.3.6.1.4.1.4874.2.2.10.1.2.2.1.2 | ColumnusdFrSubIfRowStatus | read-create | current | Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndG… |
| 1.3.6.1.4.1.4874.2.2.10.1.2.2.1.3 | ColumnusdFrSubIfLowerIfIndex | read-create | current | The ifIndex of a Frame Relay interface over which this Frame Relay Subinterface is to be layered. A value of zero indicates no layering. An implementation may … |
| 1.3.6.1.4.1.4874.2.2.10.1.2.2.1.4 | ColumnusdFrSubIfId | read-create | current | An integer identifier for the Frame Relay subinterface, used in conjunction with the command-line interface. It is provided here for cross-reference purposes o… |
| 1.3.6.1.4.1.4874.2.2.10.1.2.3 | TableusdFrSubIfCktTable | not-accessible | current | This table contains entries for Frame Relay circuits configured on Frame Relay Subinterfaces present in the system. An implementation may constrain the number … |
| 1.3.6.1.4.1.4874.2.2.10.1.2.3.1 | RowusdFrSubIfCktEntry | not-accessible | current | Each entry describes the characteristics of a Frame Relay Subinterface circuit. |
| 1.3.6.1.4.1.4874.2.2.10.1.2.3.1.1 | ColumnusdFrSubIfCktDlci | not-accessible | current | The DLCI of the Frame Relay circuit used by this subinterface. |
| 1.3.6.1.4.1.4874.2.2.10.1.2.3.1.2 | ColumnusdFrSubIfCktRowStatus | read-create | current | Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndG… |
| 1.3.6.1.4.1.4874.2.2.10.4 | NodeusdFrConformance | |||
| 1.3.6.1.4.1.4874.2.2.10.4.1 | NodeusdFrCompliances | |||
| 1.3.6.1.4.1.4874.2.2.10.4.1.1 | ComplianceusdFrCompliance | current | The compliance statement for entities that implement the Unisphere Frame Relay MIB. | |
| 1.3.6.1.4.1.4874.2.2.10.4.2 | NodeusdFrGroups | |||
| 1.3.6.1.4.1.4874.2.2.10.4.2.1 | GroupusdFrGroup | current | A collection of objects providing management of Frame Relay interfaces in a Unisphere product. | |
| 1.3.6.1.4.1.4874.2.2.10.4.2.2 | GroupusdFrSubIfGroup | current | A collection of objects providing management of Frame Relay subinterfaces in a Unisphere product. |