Unisphere-Data-IP-TUNNEL-MIB
19 objects
The IP Tunnel MIB for the Unisphere Networks Inc. enterprise.
Imported Objects
| IF-MIB | InterfaceIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | IpAddress MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DisplayString RowStatus TruthValue |
| Unisphere-Data-MIBs | usDataMibs |
| Unisphere-Data-TC | UsdName UsdNextIfIndex |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4874.2.2.51 | IdentityusdIpTunnelMIB | The IP Tunnel MIB for the Unisphere Networks Inc. enterprise. | ||
| 1.3.6.1.4.1.4874.2.2.51.1 | NodeusdIpTunnelInterfaceObjects | |||
| 1.3.6.1.4.1.4874.2.2.51.1.1 | ScalarusdIpTunnelNextIfIndex | read-only | current | Coordinate ifIndex value allocation for entries in usdIpTunnelIfTable. A GET of this object returns the next available ifIndex value to be used to create an en… |
| 1.3.6.1.4.1.4874.2.2.51.1.2 | TableusdIpTunnelInterfaceTable | not-accessible | current | This table contains entries of IP Tunnel interfaces. |
| 1.3.6.1.4.1.4874.2.2.51.1.2.1 | RowusdIpTunnelInterfaceEntry | not-accessible | current | Each entry describes the characteristics of a single IP Tunnel interface. Creating/deleting entries in this table causes corresponding entries for be created/d… |
| 1.3.6.1.4.1.4874.2.2.51.1.2.1.1 | ColumnusdIpTunnelIfIndex | not-accessible | current | The ifIndex of the IP tunnel interface. When creating entries in this table, suitable values for this object are determined by reading usdIpTunnelNextIfIndex. |
| 1.3.6.1.4.1.4874.2.2.51.1.2.1.2 | ColumnusdIpTunnelName | read-create | current | The administratively assigned name for this IP Tunnel interface. Before configuring other tunnel attributes, IP tunnel has to be created with minimum attribute… |
| 1.3.6.1.4.1.4874.2.2.51.1.2.1.3 | ColumnusdIpTunnelMode | read-create | current | The configured mode for this IP Tunnel interface. |
| 1.3.6.1.4.1.4874.2.2.51.1.2.1.4 | ColumnusdIpTunnelVirtualRouter | read-create | current | The transport virtual router associated with this IP tunnel interface. This object need not be set when creating row entries. Note that the default when this o… |
| 1.3.6.1.4.1.4874.2.2.51.1.2.1.5 | ColumnusdIpTunnelChecksum | read-create | current | The Tunnel checksum configuration for this entry. Setting this object to true(1) will enabled end-to-end checksumming and will cause the system to drop packets… |
| 1.3.6.1.4.1.4874.2.2.51.1.2.1.6 | ColumnusdIpTunnelMtu | read-create | current | The tunnel MTU. |
| 1.3.6.1.4.1.4874.2.2.51.1.2.1.7 | ColumnusdIpTunnelDestination | read-create | current | The tunnel destination IP address. |
| 1.3.6.1.4.1.4874.2.2.51.1.2.1.8 | ColumnusdIpTunnelSource | read-create | current | The tunnel source IP address. |
| 1.3.6.1.4.1.4874.2.2.51.1.2.1.9 | ColumnusdIpTunnelRowStatus | read-create | current | Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndG… |
| 1.3.6.1.4.1.4874.2.2.51.2 | NodeusdIpTunnelConformance | |||
| 1.3.6.1.4.1.4874.2.2.51.2.1 | NodeusdIpTunnelCompliances | |||
| 1.3.6.1.4.1.4874.2.2.51.2.1.1 | ComplianceusdIpTunnnelCompliance | current | The compliance statement for entities that implement the Unisphere IP Tunnel MIB. | |
| 1.3.6.1.4.1.4874.2.2.51.2.2 | NodeusdIpTunnelGroups | |||
| 1.3.6.1.4.1.4874.2.2.51.2.2.1 | GroupusdIpTunnelInterfaceGroup | current | A collection of objects for managing IP Tunnel capabilities in a Unisphere product. |