Unisphere-Data-ISIS-MIB
193 objects
The intermediate system to intermediate system (IS-IS) routing protocol MIB for Unisphere Networks routing switch products. This MIB provides objects for management of the IS-IS Routing protocol, as described in ISO 10589, when it is used to construct routing tables for IP networks, as described in RFC 1195.
Imported Objects
| IF-MIB | InterfaceIndexOrZero |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DisplayString RowStatus TEXTUAL-CONVENTION TruthValue |
| Unisphere-Data-MIBs | usDataMibs |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4874.2.2.38 | IdentityusdIsisMIB | The intermediate system to intermediate system (IS-IS) routing protocol MIB for Unisphere Networks routing switch products. This MIB provides objects for manag… | ||
| 1.3.6.1.4.1.4874.2.2.38.1 | NodeusdIsisObjects | |||
| 1.3.6.1.4.1.4874.2.2.38.1.1 | NodeusdIsisSystemGroup | |||
| 1.3.6.1.4.1.4874.2.2.38.1.1.1 | TableusdIsisSysTable | not-accessible | current | The set of instances of the Integrated IS-IS protocol existing on the system. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.1.1 | RowusdIsisSysEntry | not-accessible | current | Each row defines information specific to a single instance of the protocol existing on the system. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.1 | ColumnusdIsisSysInstance | not-accessible | current | The unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviour. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.2 | ColumnusdIsisSysVersion | read-only | current | The version number of the IS-IS protocol to which this instance conforms. This value must be set by the implementation when the row is valid. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.3 | ColumnusdIsisSysType | read-write | current | The type of this instance of the Integrated IS-IS protocol. This object follows the replaceOnlyWhileDisabled behaviour. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.4 | ColumnusdIsisSysID | read-write | current | The ID for this instance of the Integrated IS-IS protocol. This value is appended to each of the instance's area addresses to form the Network Entity Titles va… |
| 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.5 | ColumnusdIsisSysMaxPathSplits | read-write | current | Maximum number of paths with equal routing metric value which it is permitted to split between. This object follows the replaceOnlyWhileDisabled behaviour. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.6 | ColumnusdIsisSysMaxLSPGenInt | read-write | current | Maximum interval, in seconds, between generated LSPs by this instance. This object follows the resettingTimer behaviour. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.7 | ColumnusdIsisSysOrigL1LSPBuffSize | read-write | current | The maximum size of Level 1 LSPs and SNPs originated by this instance. This object follows the replaceOnlyWhileDisabled behaviour. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.8 | ColumnusdIsisSysMaxAreaAddresses | read-only | current | The maximum number of area addresses to be permitted for the area in which this instance exists. Note that all Intermediate Systems in the same area must have … |
| 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.9 | ColumnusdIsisSysMinL1LSPGenInt | read-write | current | Minimum interval, in seconds, between successive generation of L1 LSPs with the same LSPID by this instance. This object follows the resettingTimer behaviour. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.10 | ColumnusdIsisSysMinL2LSPGenInt | read-write | current | Minimum interval, in seconds, between successive generation of L2 LSPs with the same LSPID by this instance. This object follows the resettingTimer behaviour. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.11 | ColumnusdIsisSysPollESHelloRate | read-only | current | The value, in seconds, to be used for the suggested ES configuration timer in ISH PDUs when soliciting the ES configuration. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.12 | ColumnusdIsisSysWaitTime | read-only | current | Number of seconds to delay in waiting state before entering on state. This object follows the resettingTimer behaviour. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.13 | ColumnusdIsisSysOperState | read-write | current | The operational state of this instance of the Integrated IS-IS protocol. Setting this object to the value on when its current value is off enables operation of… |
| 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.14 | ColumnusdIsisSysL1State | read-only | current | The state of the Level 1 database. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.15 | ColumnusdIsisSysCorrLSPs | read-only | current | Number of corrupted LSPs detected. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.16 | ColumnusdIsisSysLSPL1DbaseOloads | read-only | current | Number of times the LSP L1 database has become overloaded. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.17 | ColumnusdIsisSysManAddrDropFromAreas | read-only | current | Number of times a manual address has been dropped from the area. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.18 | ColumnusdIsisSysAttmptToExMaxSeqNums | read-only | current | Number of times the IS has attempted to exceed the maximum sequence number. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.19 | ColumnusdIsisSysSeqNumSkips | read-only | current | Number of times a sequence number skip has occurred. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.20 | ColumnusdIsisSysOwnLSPPurges | read-only | current | Number of times a zero-aged copy of the system's own LSP is received from some other node. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.21 | ColumnusdIsisSysIDFieldLenMismatches | read-only | current | Number of times a PDU is received with a different value for ID field length to that of the receiving system. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.22 | ColumnusdIsisSysMaxAreaAddrMismatches | read-only | current | Number of times a PDU is received with a different value for MaximumAreaAddresses from that of the receiving system. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.23 | ColumnusdIsisSysOrigL2LSPBuffSize | read-write | current | The maximum size of Level 2 LSPs and SNPs originated by this system. This object follows the replaceOnlyWhileDisabled behaviour. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.24 | ColumnusdIsisSysL2State | read-only | current | The state of the Level 2 database. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.25 | ColumnusdIsisSysLSPL2DbaseOloads | read-only | current | Number of times the Level 2 LSP database has become overloaded. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.26 | ColumnusdIsisSysAuthFails | read-only | current | The number of authentication failures recognized by this instance of the protocol. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.27 | ColumnusdIsisSysLSPIgnoreErrors | read-write | current | If true, allow the router to ignore IS-IS link state packets (LSPs) that are received with internal checksum errors rather than purging the LSPs. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.28 | ColumnusdIsisSysMaxAreaCheck | read-only | current | When on, enables checking of maximum area addresses per IS version of ISO10589. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.29 | ColumnusdIsisSysSetOverloadBit | read-write | current | Isis overload bit |
| 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.30 | ColumnusdIsisSysSetOverloadBitStartupDuration | read-write | current | Specifies the length in time of seconds to set the overload bit from startup. This object must be set together with usdIsisSysSetOverloadBit, otherwise the age… |
| 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.31 | ColumnusdIsisSysMaxLspLifetime | read-write | current | Specifies the maximum time (in seconds) a LSP will remain in the box without being refreshed before being considered invalid. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.32 | ColumnusdIsisSysL1SpfInterval | read-write | current | Minimum interval, in seconds, between level 1 SPF calculations. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.33 | ColumnusdIsisSysL2SpfInterval | read-write | current | Minimum interval, in seconds, between level 2 SPF calculations. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.34 | ColumnusdIsisSysIshHoldTime | read-write | current | Specify a holdtime advertised in ESH/ISH PDUs. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.35 | ColumnusdIsisSysIshConfigTimer | read-write | current | Specify the rate of transmission for ESH and ISH packets. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.36 | ColumnusdIsisSysDistributeDomainWide | read-write | current | When on, enables distribution of prefixes throughout a multi-level domain. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.37 | ColumnusdIsisSysDistance | read-write | current | The weight applied to IS-IS routes. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.38 | ColumnusdIsisSysL1MetricStyle | read-write | current | Specifies the type of IP reachability TLV to advertise in level 1 LSPs. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.39 | ColumnusdIsisSysL2MetricStyle | read-write | current | Specifies the type of IP reachability TLV to advertise in level 2 LSPs. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.40 | ColumnusdIsisSysIsoRouteTag | read-write | current | The ISO routing area tag. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.41 | ColumnusdIsisSysMplsTeLevel | read-write | current | Select flooding of MPLS traffic engineering link information into the specified ISIS level. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.42 | ColumnusdIsisSysMplsTeRtrIdIfIndex | read-write | current | Configure the stable router interface ID to designate it as TE capable. A value of zero is used to remove any configured router interface ID. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.2 | TableusdIsisManAreaAddrTable | not-accessible | current | The set of manual area addresses configured on this Intermediate System. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.2.1 | RowusdIsisManAreaAddrEntry | not-accessible | current | Each entry contains one area address manually configured on this system. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.2.1.1 | ColumnusdIsisManAreaAddrSysInstance | not-accessible | current | The unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviour. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.2.1.2 | ColumnusdIsisManAreaAddr | not-accessible | current | A manually configured area address for this system. This object follows the index behaviour. Note: an index for the entry {1, {49.0001} active} in this table w… |
| 1.3.6.1.4.1.4874.2.2.38.1.1.2.1.3 | ColumnusdIsisManAreaAddrRowStatus | read-create | current | The state of the usdIsisManAreaAddrEntry. This object follows the RowStatus behaviour. If an attempt is made to set this object to the value off when the corre… |
| 1.3.6.1.4.1.4874.2.2.38.1.1.3 | TableusdIsisSysProtSuppTable | not-accessible | current | This table contains the manually configured set of protocols supported by each instance of the Integrated ISIS protocol. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.3.1 | RowusdIsisSysProtSuppEntry | not-accessible | current | Each entry contains one protocol supported by an instance of the Integrated ISIS protocol. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.3.1.1 | ColumnusdIsisSysProtSuppSysInstance | not-accessible | current | The unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviour. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.3.1.2 | ColumnusdIsisSysProtSuppProtocol | not-accessible | current | One supported protocol. This object follows the index behaviour. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.3.1.3 | ColumnusdIsisSysProtSuppRowStatus | read-only | current | The state of the usdIsisSysProtSuppEntry. This object follows the RowStatus behavior. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.4 | TableusdIsisSummAddrTable | not-accessible | current | The set of IP summary addresses to use in forming the contents of Level 2 LSPs originated by this level 2 Intermediate System. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.4.1 | RowusdIsisSummAddrEntry | not-accessible | current | Each entry contains one IP summary address. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.4.1.1 | ColumnusdIsisSummAddrSysInstance | not-accessible | current | The unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviours. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.4.1.2 | ColumnusdIsisSummAddress | not-accessible | current | The IP Address value for this summary address. This object follows the index behaviour. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.4.1.3 | ColumnusdIsisSummAddrMask | not-accessible | current | The mask value for this summary address. This object follows the index behaviour. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.4.1.4 | ColumnusdIsisSummAddrRowStatus | read-create | current | The existence state of this summary address. This object follows the RowStatus behaviour. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.4.1.5 | ColumnusdIsisSummAddrOperState | read-create | current | The operational state of this entry. This object follows the operationalState behaviour. When the operational state changes if this would cause the contents of… |
| 1.3.6.1.4.1.4874.2.2.38.1.1.4.1.6 | ColumnusdIsisSummAddrDefaultMetric | read-create | current | The default metric value to announce this summary address with in Level 1 or 2 LSPs generated by this system. A Metric value of 0 indicates to use the lowest m… |
| 1.3.6.1.4.1.4874.2.2.38.1.1.4.1.7 | ColumnusdIsisSummAddrDelayMetric | read-only | current | The delay metric value to announce this summary address with in Level 2 LSPs generated by this system. The value of zero is reserved to indicate that this metr… |
| 1.3.6.1.4.1.4874.2.2.38.1.1.4.1.8 | ColumnusdIsisSummAddrExpenseMetric | read-only | current | The expense metric value to announce this summary address with in Level 2 LSPs generated by this system. The value of zero is reserved to indicate that this me… |
| 1.3.6.1.4.1.4874.2.2.38.1.1.4.1.9 | ColumnusdIsisSummAddrErrorMetric | read-only | current | The error metric value to announce this summary address with in Level n LSPs generated by this system. The value of zero is reserved to indicate that this metr… |
| 1.3.6.1.4.1.4874.2.2.38.1.1.4.1.10 | ColumnusdIsisSummLevel | read-create | current | The level of database at which to annouce this summary. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.5 | TableusdIsisSysHostNameTable | not-accessible | current | This table contains the manually configured set of host name to system ID aliases supported by each instance of the Integrated ISIS protocol. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.5.1 | RowusdIsisSysHostNameEntry | not-accessible | current | Each entry contains one name to system ID alias supported by an instance of the Integrated ISIS protocol. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.5.1.1 | ColumnusdIsisSysHostNameSysInstance | not-accessible | current | The unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviour. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.5.1.2 | ColumnusdIsisSysHostNameSysId | not-accessible | current | The ID for the system which this name will be assigned. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.5.1.3 | ColumnusdIsisSysHostNameAreaAddr | read-write | current | A configured area address for the system which this name will be assigned. This object follows the index behaviour. Note: an index for the entry {1, {49.0001} … |
| 1.3.6.1.4.1.4874.2.2.38.1.1.5.1.4 | ColumnusdIsisSysHostNameName | read-write | current | A string to use when displaying system data with this system ID. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.5.1.5 | ColumnusdIsisSysHostNameType | read-only | current | The type of host name entry. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.5.1.6 | ColumnusdIsisSysHostNameRowStatus | read-write | current | The status of this host name entry. This object follows the RowStatus behaviour. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.6 | TableusdIsisSysAreaAuthenticationTable | not-accessible | current | This table contains the manually configured set of area authentication keys supported by each instance of the Integrated ISIS protocol. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.6.1 | RowusdIsisSysAreaAuthenticationEntry | not-accessible | current | Each entry contains one area authentication key supported by an instance of the Integrated ISIS protocol. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.6.1.1 | ColumnusdIsisSysAreaAuthenticationSysInstance | not-accessible | current | The unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviour. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.6.1.2 | ColumnusdIsisSysAreaAuthenticationKeyId | not-accessible | current | The unique identifier of the instance to which this row corresponds. This object follows the index behaviour. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.6.1.3 | ColumnusdIsisSysAreaAuthenticationPwd | read-write | current | The value to be used as the Authentication Key in Level 1 Link State Packets whenever the value of usdIsisSysAreaAuthenticationKeyType has a value of plaintext… |
| 1.3.6.1.4.1.4874.2.2.38.1.1.6.1.4 | ColumnusdIsisSysAreaAuthenticationKeyType | read-write | current | What authentication scheme, if any, is used to protect Level 1 Link State packets and sequence number packets |
| 1.3.6.1.4.1.4874.2.2.38.1.1.6.1.5 | ColumnusdIsisSysAreaAuthenticationStartAcceptTime | read-write | current | The date and time when this authentication key will start to be used to validate level 1 LSPs and SNPs received. The Default value the start accept time will b… |
| 1.3.6.1.4.1.4874.2.2.38.1.1.6.1.6 | ColumnusdIsisSysAreaAuthenticationStartGenerateTime | read-write | current | The date and time when this authentication key will start to be used to authenticate level 1 LSPs and SNPs transmitted. The Default value the start accept time… |
| 1.3.6.1.4.1.4874.2.2.38.1.1.6.1.7 | ColumnusdIsisSysAreaAuthenticationStopAcceptTime | read-write | current | The date and time when this authentication key will stop being accepted as a valid level 1 LSP and SNP key received. A value of zero indicates the key will nev… |
| 1.3.6.1.4.1.4874.2.2.38.1.1.6.1.8 | ColumnusdIsisSysAreaAuthenticationStopGenerateTime | read-write | current | The date and time when this authentication key will stop being used to authenticate level 1 LSPs and SNPs transmitted. A value of zero indicates the key will n… |
| 1.3.6.1.4.1.4874.2.2.38.1.1.6.1.9 | ColumnusdIsisSysAreaAuthenticationRowStatus | read-write | current | The existence state of this authentication key. This object follows the RowStatus behaviour. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.7 | TableusdIsisSysDomainAuthenticationTable | not-accessible | current | This table contains the manually configured set of domain authentication keys supported by each instance of the Integrated ISIS protocol. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.7.1 | RowusdIsisSysDomainAuthenticationEntry | not-accessible | current | Each entry contains one domain authentication key supported by an instance of the Integrated ISIS protocol. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.7.1.1 | ColumnusdIsisSysDomainAuthenticationSysInstance | not-accessible | current | The unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviour. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.7.1.2 | ColumnusdIsisSysDomainAuthenticationKeyId | not-accessible | current | The unique identifier of the instance to which this row corresponds. This object follows the index behaviour. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.7.1.3 | ColumnusdIsisSysDomainAuthenticationPwd | read-write | current | The value to be used as the Authentication Key in Level 2 Link State Packets whenever the value of usdIsisSysDomainAuthenticationKeyType has a value of plainte… |
| 1.3.6.1.4.1.4874.2.2.38.1.1.7.1.4 | ColumnusdIsisSysDomainAuthenticationKeyType | read-write | current | What authentication scheme, if any, is used to protect Level 2 Link State packets and Sequence Number packets |
| 1.3.6.1.4.1.4874.2.2.38.1.1.7.1.5 | ColumnusdIsisSysDomainAuthenticationStartAcceptTime | read-write | current | The date and time when this authentication key will start to be used to validate level 2 LSPs and SNPs received. The Default value the start accept time will b… |
| 1.3.6.1.4.1.4874.2.2.38.1.1.7.1.6 | ColumnusdIsisSysDomainAuthenticationStartGenerateTime | read-write | current | The date and time when this authentication key will start to be used to authenticate level 2 LSPs and SNPs transmitted. The Default value the start accept time… |
| 1.3.6.1.4.1.4874.2.2.38.1.1.7.1.7 | ColumnusdIsisSysDomainAuthenticationStopAcceptTime | read-write | current | The date and time when this authentication key will stop being accepted as a valid level 2 LSP and SNP key received. A value of zero indicates the key will nev… |
| 1.3.6.1.4.1.4874.2.2.38.1.1.7.1.8 | ColumnusdIsisSysDomainAuthenticationStopGenerateTime | read-write | current | The date and time when this authentication key will stop being used to authenticate level 2 LSPs and SNPs transmitted. A value of zero indicates the key will n… |
| 1.3.6.1.4.1.4874.2.2.38.1.1.7.1.9 | ColumnusdIsisSysDomainAuthenticationRowStatus | read-write | current | The existence state of this authentication key. This object follows the RowStatus behaviour. |
| 1.3.6.1.4.1.4874.2.2.38.1.2 | NodeusdIsisCircuitGroup | |||
| 1.3.6.1.4.1.4874.2.2.38.1.2.1 | TableusdIsisCircTable | not-accessible | current | The table of circuits used by each instance of Integrated IS-IS on this system. |
| 1.3.6.1.4.1.4874.2.2.38.1.2.1.1 | RowusdIsisCircEntry | not-accessible | current | An usdIsisCircEntry exists for each circuit used by Integrated IS-IS on this system. |
| 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.1 | ColumnusdIsisCircSysInstance | not-accessible | current | The unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviour. |
| 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.2 | ColumnusdIsisCircIfIndex | not-accessible | current | The value of ifIndex for the interface to which this circuit corresponds. |
| 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.3 | ColumnusdIsisCircLocalID | read-only | current | An identification that can be used in protocol packets to identify a circuit. Implementations may devise ways to assure that this value is suitable for the cir… |
| 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.4 | ColumnusdIsisCircOperState | read-write | current | The operational state of the circuit. This object follows the operationalState behaviour. |
| 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.5 | ColumnusdIsisCircRowStatus | read-write | current | The existence state of this circuit. This object follows the RowStatus behaviour. |
| 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.6 | ColumnusdIsisCircType | read-only | current | The type of the circuit. This object follows the replaceOnlyWhileDisabled behaviour. The type specified must be compatible with the type of the interface defin… |
| 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.7 | ColumnusdIsisCircL1DefaultMetric | read-write | current | The default metric value of this circuit for Level 1 traffic. |
| 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.8 | ColumnusdIsisCircL1DelayMetric | read-only | current | The delay metric value of this circuit for Level 1 traffic. The value of zero is reserved to indicate that this metric is not supported. |
| 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.9 | ColumnusdIsisCircL1ExpenseMetric | read-only | current | The expense metric value of this circuit for Level 1 traffic. The value of zero is reserved to indicate that this metric is not supported. |
| 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.10 | ColumnusdIsisCircL1ErrorMetric | read-only | current | The error metric value of this circuit for Level 1 traffic. The value of zero is reserved to indicate that this metric is not supported. |
| 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.11 | ColumnusdIsisCircExtDomain | read-only | current | If true, suppress normal transmission of and interpretation of Intra-domain ISIS PDUs on this circuit. |
| 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.12 | ColumnusdIsisCircAdjChanges | read-only | current | The number of times an adjacency state change has occurred on this circuit. |
| 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.13 | ColumnusdIsisCircInitFails | read-only | current | The number of times initialization of this circuit has failed. |
| 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.14 | ColumnusdIsisCircRejAdjs | read-only | current | The number of times an adjacency has been rejected on this circuit. |
| 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.15 | ColumnusdIsisCircOutCtrlPDUs | read-only | current | The number of IS-IS control PDUs sent on this circuit. |
| 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.16 | ColumnusdIsisCircInCtrlPDUs | read-only | current | The number of IS-IS control PDUs received on this circuit. |
| 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.17 | ColumnusdIsisCircIDFieldLenMismatches | read-only | current | The number of times an IS-IS control PDU with an ID field length different to that for this system has been received. |
| 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.18 | ColumnusdIsisCircL2DefaultMetric | read-write | current | The default metric value of this circuit for level 2 traffic. |
| 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.19 | ColumnusdIsisCircL2DelayMetric | read-only | current | The delay metric value of this circuit for level 2 traffic. The value of zero is reserved to indicate that this metric is not supported. |
| 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.20 | ColumnusdIsisCircL2ExpenseMetric | read-only | current | The expense metric value of this circuit for level 2 traffic. The value of zero is reserved to indicate that this metric is not supported. |
| 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.21 | ColumnusdIsisCircL2ErrorMetric | read-only | current | The error metric value of this circuit for level 2 traffic. The value of zero is reserved to indicate that this metric is not supported. |
| 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.22 | ColumnusdIsisCircManL2Only | read-only | current | When true, indicates that this circuit is to be used only for level 2. This object follows the replaceOnlyWhileDisabled behaviour. |
| 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.23 | ColumnusdIsisCircL1ISPriority | read-write | current | The priority for becoming LAN Level 1 Deignated Intermediate System on a broadcast circuit. |
| 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.24 | ColumnusdIsisCircL1CircID | read-only | current | The LAN ID allocated by the LAN Level 1 Designated Intermediate System. Where this system is not aware of the value (because it is not participating in the Lev… |
| 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.25 | ColumnusdIsisCircL1DesIS | read-only | current | The ID of the LAN Level 1 Designated Intermediate System on this circuit. If, for any reason this system is not partaking in the relevant Designated Intermedia… |
| 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.26 | ColumnusdIsisCircLANL1DesISChanges | read-only | current | The number of times the LAN Level 1 Designated Intermediate System has changed. |
| 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.27 | ColumnusdIsisCircL2ISPriority | read-write | current | The priority for becoming LAN level 2 Designated Intermediate System. |
| 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.28 | ColumnusdIsisCircL2CircID | read-only | current | The LAN ID allocated by the LAN Level 2 Designated Intermediate System. Where this system is not aware of this value (because it is not participating in the Le… |
| 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.29 | ColumnusdIsisCircL2DesIS | read-only | current | The ID of the LAN Level 2 Designated Intermediate System on this circuit. If, for any reason, this system is not partaking in the relevant Designated Intermedi… |
| 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.30 | ColumnusdIsisCircLANL2DesISChanges | read-only | current | The number of times the LAN Level 2 Designated Intermediate System has changed. |
| 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.31 | ColumnusdIsisCircMCAddr | read-only | current | Specifies which type of multicast address will be used for sending HELLO PDUs on this circuit. |
| 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.32 | ColumnusdIsisCircPtToPtCircID | read-only | current | The ID of the circuit allocated during initialization. If no value has been negotiated (either because the adjacency is to an End System, or because initializa… |
| 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.33 | ColumnusdIsisCircL1HelloTimer | read-write | current | Maximum period, in seconds, between Level 1 IIH PDUs on multiaccess networks. It is also used as the period between Hellos on point to point circuits. This obj… |
| 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.34 | ColumnusdIsisCircL2HelloTimer | read-write | current | Maximum period, in seconds, between Level 1 IIH PDUs on multiaccess networks. This object follows the resettingTimer behaviour. |
| 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.35 | ColumnusdIsisCircL1HelloMultiplier | read-write | current | This value is multiplied by the corresponding HelloTimer and the result in seconds (rounded up) is used as the holding time in transmitted hellos, to be used b… |
| 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.36 | ColumnusdIsisCircL2HelloMultiplier | read-write | current | This value is multiplied by the corresponding HelloTimer and the result in seconds (rounded up) is used as the holding time in transmitted hellos, to be used b… |
| 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.37 | ColumnusdIsisCircMinLSPTransInt | read-write | current | Minimum interval, in milliseconds, between transmission of LSPs on a circuit. This object follows the resettingTimer behaviour. This timer shall be capable of … |
| 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.38 | ColumnusdIsisCircMinLSPReTransInt | read-write | current | Minimum interval, in seconds, between re-transmission of an Level 1 or 2 LSP. This object follows the resettingTimer behaviour. |
| 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.39 | ColumnusdIsisCircL1CSNPInterval | read-write | current | Interval of time, in seconds, between transmission of Level 1 CSNPs on multiaccess networks if this router is the designated router. On point-to-point networks… |
| 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.40 | ColumnusdIsisCircL2CSNPInterval | read-write | current | Interval of time, in seconds, between transmission of Level 2 CSNPs on multiaccess networks if this router is the designated router. On point-to-point networks… |
| 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.41 | ColumnusdIsisCircLSPThrottle | read-write | current | Minimal interval of time, in milliseconds, between retransmissions of LSPs on a point to point interface. |
| 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.42 | ColumnusdIsisCircMeshGroupEnabled | read-write | current | Is this port a member of a mesh group, or blocked? Circuits in the same mesh group act as a virtual multiaccess network. LSPs seen on one circuit in a mesh gro… |
| 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.43 | ColumnusdIsisCircMeshGroup | read-write | current | Circuits in the same mesh group act as a virtual multiaccess network. LSPs seen on one circuit in a mesh group will not be flooded to another circuit in the sa… |
| 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.44 | ColumnusdIsisCircLevel | read-write | current | The type of this circuit. This object follows the replaceOnlyWhileDisabled behavior. |
| 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.45 | ColumnusdIsisCircState | read-only | current | The operational state of the circuit. |
| 1.3.6.1.4.1.4874.2.2.38.1.2.2 | TableusdIsisSysL1CircAuthenticationTable | not-accessible | current | This table contains the manually configured set of Level 1 Circuit authentication keys supported by each instance of the Integrated ISIS protocol. |
| 1.3.6.1.4.1.4874.2.2.38.1.2.2.1 | RowusdIsisSysL1CircAuthenticationEntry | not-accessible | current | Each entry contains one Level 1 circuit authentication key supported by an instance of the Integrated ISIS protocol. |
| 1.3.6.1.4.1.4874.2.2.38.1.2.2.1.1 | ColumnusdIsisSysL1CircAuthenticationSysInstance | not-accessible | current | The unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviour. |
| 1.3.6.1.4.1.4874.2.2.38.1.2.2.1.2 | ColumnusdIsisSysL1CircAuthenticationIfIndex | not-accessible | current | The value of ifIndex for the interface to which this circuit corresponds. |
| 1.3.6.1.4.1.4874.2.2.38.1.2.2.1.3 | ColumnusdIsisSysL1CircAuthenticationKeyId | not-accessible | current | The unique identifier of the instance to which this row corresponds. This object follows the index behaviour. |
| 1.3.6.1.4.1.4874.2.2.38.1.2.2.1.4 | ColumnusdIsisSysL1CircAuthenticationPwd | read-write | current | The value to be used as the Authentication Key in Level 1 Hello Packets whenever the value of usdIsisSysL1CircAuthenticationKeyType has a value of hmacMd5. A m… |
| 1.3.6.1.4.1.4874.2.2.38.1.2.2.1.5 | ColumnusdIsisSysL1CircAuthenticationKeyType | read-write | current | What authentication scheme, if any, is used to protect Level 1 hello packets. |
| 1.3.6.1.4.1.4874.2.2.38.1.2.2.1.6 | ColumnusdIsisSysL1CircAuthenticationStartAcceptTime | read-write | current | The date and time when this authentication key will start to be used to validate level 1 IIH packets received. The Default value the start accept time will be … |
| 1.3.6.1.4.1.4874.2.2.38.1.2.2.1.7 | ColumnusdIsisSysL1CircAuthenticationStartGenerateTime | read-write | current | The date and time when this authentication key will start to be used to authenticate level 1 IIH packets transmitted. The Default value the start accept time w… |
| 1.3.6.1.4.1.4874.2.2.38.1.2.2.1.8 | ColumnusdIsisSysL1CircAuthenticationStopAcceptTime | read-write | current | The date and time when this authentication key will stop being accepted as a valid level 1 IIH packets key received. A value of zero indicates the key will nev… |
| 1.3.6.1.4.1.4874.2.2.38.1.2.2.1.9 | ColumnusdIsisSysL1CircAuthenticationStopGenerateTime | read-write | current | The date and time when this authentication key will stop being used to authenticate level 1 IIH packets transmitted. A value of zero indicates the key will nev… |
| 1.3.6.1.4.1.4874.2.2.38.1.2.2.1.10 | ColumnusdIsisSysL1CircAuthenticationRowStatus | read-write | current | The existence state of this authentication key. This object follows the RowStatus behaviour. |
| 1.3.6.1.4.1.4874.2.2.38.1.2.3 | TableusdIsisSysL2CircAuthenticationTable | not-accessible | current | This table contains the manually configured set of Level 2 Circuit authentication keys supported by each instance of the Integrated ISIS protocol. |
| 1.3.6.1.4.1.4874.2.2.38.1.2.3.1 | RowusdIsisSysL2CircAuthenticationEntry | not-accessible | current | Each entry contains one Level 2 circuit authentication key supported by an instance of the Integrated ISIS protocol. |
| 1.3.6.1.4.1.4874.2.2.38.1.2.3.1.1 | ColumnusdIsisSysL2CircAuthenticationSysInstance | not-accessible | current | The unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviour. |
| 1.3.6.1.4.1.4874.2.2.38.1.2.3.1.2 | ColumnusdIsisSysL2CircAuthenticationIfIndex | not-accessible | current | The value of ifIndex for the interface to which this circuit corresponds. |
| 1.3.6.1.4.1.4874.2.2.38.1.2.3.1.3 | ColumnusdIsisSysL2CircAuthenticationKeyId | not-accessible | current | The unique identifier of the instance to which this row corresponds. This object follows the index behaviour. |
| 1.3.6.1.4.1.4874.2.2.38.1.2.3.1.4 | ColumnusdIsisSysL2CircAuthenticationPwd | read-write | current | The value to be used as the Authentication Key in Level 2 Hello Packets whenever the value of usdIsisSysL2CircAuthenticationKeyType has a value of hmacMd5. A m… |
| 1.3.6.1.4.1.4874.2.2.38.1.2.3.1.5 | ColumnusdIsisSysL2CircAuthenticationKeyType | read-write | current | What authentication scheme, if any, is used to protect Level 2 hello packets. |
| 1.3.6.1.4.1.4874.2.2.38.1.2.3.1.6 | ColumnusdIsisSysL2CircAuthenticationStartAcceptTime | read-write | current | The date and time when this authentication key will start to be used to validate level 2 IIH packets received. The Default value the start accept time will be … |
| 1.3.6.1.4.1.4874.2.2.38.1.2.3.1.7 | ColumnusdIsisSysL2CircAuthenticationStartGenerateTime | read-write | current | The date and time when this authentication key will start to be used to authenticate level 2 IIH packets transmitted. The Default value the start accept time w… |
| 1.3.6.1.4.1.4874.2.2.38.1.2.3.1.8 | ColumnusdIsisSysL2CircAuthenticationStopAcceptTime | read-write | current | The date and time when this authentication key will stop being accepted as a valid level 2 IIH packets key received. A value of zero indicates the key will nev… |
| 1.3.6.1.4.1.4874.2.2.38.1.2.3.1.9 | ColumnusdIsisSysL2CircAuthenticationStopGenerateTime | read-write | current | The date and time when this authentication key will stop being used to authenticate level 2 IIH packets transmitted. A value of zero indicates the key will nev… |
| 1.3.6.1.4.1.4874.2.2.38.1.2.3.1.10 | ColumnusdIsisSysL2CircAuthenticationRowStatus | read-write | current | The existence state of this authentication key. This object follows the RowStatus behaviour. |
| 1.3.6.1.4.1.4874.2.2.38.2 | NodeusdIsisTrapGroup | |||
| 1.3.6.1.4.1.4874.2.2.38.3 | NodeusdIsisConformance | |||
| 1.3.6.1.4.1.4874.2.2.38.3.1 | NodeusdIsisCompliances | |||
| 1.3.6.1.4.1.4874.2.2.38.3.1.1 | ComplianceusdIsisCompliance | obsolete | Obsolete compliance statement for systems supporting ISIS functionality. This statement became obsolete when the usdIsisCircState object was added. | |
| 1.3.6.1.4.1.4874.2.2.38.3.1.2 | ComplianceusdIsisCompliance2 | obsolete | Obsolete compliance statement for systems supporting ISIS functionality. This statement became obsolete when MPSL support was added. | |
| 1.3.6.1.4.1.4874.2.2.38.3.1.3 | ComplianceusdIsisCompliance3 | current | The compliance statement for systems supporting ISIS functionality. | |
| 1.3.6.1.4.1.4874.2.2.38.3.2 | NodeusdIsisMIBGroups | |||
| 1.3.6.1.4.1.4874.2.2.38.3.2.1 | GroupusdIsisSystemMgmtGroup | obsolete | Obsolete system level objects for ISIS management functionality. This group became obsolete when the MPLS management objects were added. | |
| 1.3.6.1.4.1.4874.2.2.38.3.2.2 | GroupusdIsisCircuitMgmtGroup | obsolete | Obsolete circuit management objects. This group became obsolete when the usdIsisCircState object was added. | |
| 1.3.6.1.4.1.4874.2.2.38.3.2.3 | GroupusdIsisCircuitMgmtGroup2 | current | The circuit management objects. | |
| 1.3.6.1.4.1.4874.2.2.38.3.2.4 | GroupusdIsisSystemMgmtGroup2 | current | The system level objects for ISIS management functionality. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| AuthTime | Integer32 | current | Then number of seconds since Jan. 1 1970. |
| CircuitID | OCTET STRING (SIZE(2..9)) | current | ID for a circuit. |
| ISPriority | Integer32 (1..127) | current | Integer sub-range for ISIS priority. |
| LevelState | INTEGER { off(1), on(2), waiting(3) } | current | States of the ISIS protocol. |
| LSPBuffSize | Integer32 (512..9180) | current | Integer sub range for LSP size. |
| OperState | INTEGER { off(1), on(2) } | current | Type used in enabling and disabling a row. |
| OSINSAddress | OCTET STRING (SIZE(0..20)) | current | OSI Network Service Address, e.g. NSAP, Network Entity Title |
| OtherMetric | Integer32 (0..63) | current | Integer sub-range for metrics other than the default metric for single hop. |
| SupportedProtocol | INTEGER { iso8473(129), ip(204), ipV6(205) } | current | Types of network protocol supported by Integrated ISIS. The values for ISO8473 and IP are those registered for these protocols in ISO TR9577. |
| SystemID | OCTET STRING (SIZE(0..8)) | current | A system ID. |
| UsdDefaultMetric | Integer32 (1..16777214) | current | Integer sub-range for default metric for single hop. The value is truncated to 63 when the usdIsisSysL1MetricStyle or usdIsisSysL2MetricStyle is set to usdIsisMetricStyleNarrow |