MIB Viewer

Unisphere-Data-LOG-MIB

59 objects
The Log MIB for the Unisphere Networks Inc. enterprise.
Imported Objects
SNMPv2-CONFMODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP
SNMPv2-SMICounter32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32
SNMPv2-TCDateAndTime DisplayString RowStatus TEXTUAL-CONVENTION TimeStamp TruthValue
Unisphere-Data-MIBsusDataMibs
Unisphere-Data-TCUsdLogSeverity
OIDNameAccessStatusDescription
1.3.6.1.4.1.4874.2.2.28IdentityusdLogMIBThe Log MIB for the Unisphere Networks Inc. enterprise.
1.3.6.1.4.1.4874.2.2.28.0NodeusdLogTrapPrefix
1.3.6.1.4.1.4874.2.2.28.0.1NotificationusdLogMsgThresholdTrapcurrentThis trap is generated to report that an incremental number of log messages (described by the value of usdLogMsgThreshold) have been added to usdLogMsgTable.
1.3.6.1.4.1.4874.2.2.28.1NodeusdLogObjects
1.3.6.1.4.1.4874.2.2.28.1.1NodeusdLogDestinations
1.3.6.1.4.1.4874.2.2.28.1.1.1NodeusdLogDestSyslog
1.3.6.1.4.1.4874.2.2.28.1.1.1.1ScalarusdLogDestSyslogSeverityread-writeobsoleteThe minimum severity level of messages sent to the SYSLOG server. A value of 'off' indicates no log messages are sent to this destination.
1.3.6.1.4.1.4874.2.2.28.1.1.1.2ScalarusdLogDestSyslogAddressread-writeobsoleteThe IP address of the SYSLOG server to which log messages are to be sent. A value of 0.0.0.0 indicates no server address is configured.
1.3.6.1.4.1.4874.2.2.28.1.1.1.3TableusdLogSyslogTablenot-accessiblecurrentA table describing the characteristics of each syslog destination.
1.3.6.1.4.1.4874.2.2.28.1.1.1.3.1RowusdLogSyslogEntrynot-accessiblecurrentAn entry describingthe characteristics of a syslog destination.
1.3.6.1.4.1.4874.2.2.28.1.1.1.3.1.1ColumnusdLogSyslogIpAddressnot-accessiblecurrentThe IP address of this syslog destination. This value must be a unicast IP address.
1.3.6.1.4.1.4874.2.2.28.1.1.1.3.1.2ColumnusdLogSyslogRowStatusread-createcurrentControls creation/deletion of entries in this table. Only 'createAndGo' and 'destroy' are supported.
1.3.6.1.4.1.4874.2.2.28.1.1.1.3.1.3ColumnusdLogSyslogSeverityread-createcurrentThe severity level for this syslog destination. Setting this value to 'off' suppresses log messages from being sent to this syslog destination.
1.3.6.1.4.1.4874.2.2.28.1.1.1.3.1.4ColumnusdLogSyslogFacilityread-createcurrentThe facility id attached to messages sent to this syslog destination.
1.3.6.1.4.1.4874.2.2.28.1.1.2NodeusdLogDestConsole
1.3.6.1.4.1.4874.2.2.28.1.1.2.1ScalarusdLogDestConsoleSeverityread-writecurrentThe minimum severity level of messages sent to the console. A value of 'off' indicates no log messages are sent to this destination.
1.3.6.1.4.1.4874.2.2.28.1.1.3NodeusdLogDestNvFile
1.3.6.1.4.1.4874.2.2.28.1.1.3.1ScalarusdLogDestNvFileSeverityread-writecurrentThe minimum severity level of messages sent to the nonvolatile log file. A value of 'off' indicates no log messages are to be sent to this destination.
1.3.6.1.4.1.4874.2.2.28.1.2NodeusdLogCategories
1.3.6.1.4.1.4874.2.2.28.1.2.1NodeusdLogCatScalars
1.3.6.1.4.1.4874.2.2.28.1.2.2TableusdLogCatTablenot-accessiblecurrentA table describing the characteristics of each log category.
1.3.6.1.4.1.4874.2.2.28.1.2.2.1RowusdLogCatEntrynot-accessiblecurrentAn entry describing the characteristics of a log category.
1.3.6.1.4.1.4874.2.2.28.1.2.2.1.1ColumnusdLogCatIndexnot-accessiblecurrentAn integer index uniquely associated with a log. Index values do not necessarily persist across system reboots. Following reboot, mappings of (reboot-invariant…
1.3.6.1.4.1.4874.2.2.28.1.2.2.1.2ColumnusdLogCatNameread-onlycurrentThe name of this log category.
1.3.6.1.4.1.4874.2.2.28.1.2.2.1.3ColumnusdLogCatDescrread-onlycurrentA description of the functionality for which events are recorded by this log category.
1.3.6.1.4.1.4874.2.2.28.1.2.2.1.4ColumnusdLogCatEngineeringread-onlycurrentAn indication of whether this log is intended mainly for engineering development and debug purposes.
1.3.6.1.4.1.4874.2.2.28.1.2.2.1.5ColumnusdLogCatDiscardsread-onlycurrentThe number of messages generated by this log category that were discarded because of resource limitations.
1.3.6.1.4.1.4874.2.2.28.1.2.2.1.6ColumnusdLogCatSeverityread-writecurrentThe severity level for this log category. The value 'off' disables recording of this log category's messages. For other severity level values, only messages at…
1.3.6.1.4.1.4874.2.2.28.1.2.2.1.7ColumnusdLogCatVerbosityread-writecurrentThe verbosity level for this log category. Supplementary information may be available for certain event types. This object controls whether that additional inf…
1.3.6.1.4.1.4874.2.2.28.1.2.3TableusdLogCatNameTablenot-accessiblecurrentA table mapping each log category's name to its index.
1.3.6.1.4.1.4874.2.2.28.1.2.3.1RowusdLogCatNameEntrynot-accessiblecurrentAn entry mapping a log category's name to its index.
1.3.6.1.4.1.4874.2.2.28.1.2.3.1.1ColumnusdLogCatNameNameread-onlycurrentThe name of the log category.
1.3.6.1.4.1.4874.2.2.28.1.2.3.1.2ColumnusdLogCatNameIndexread-onlycurrentThe log index associated with this log category.
1.3.6.1.4.1.4874.2.2.28.1.3NodeusdLogMessages
1.3.6.1.4.1.4874.2.2.28.1.3.1NodeusdLogMsgScalars
1.3.6.1.4.1.4874.2.2.28.1.3.1.1ScalarusdLogMsgCapacityread-onlycurrentThe maximum capacity, in number of log messages, of the usdLogMsgTable.
1.3.6.1.4.1.4874.2.2.28.1.3.1.2ScalarusdLogMsgLastSeqNumberread-onlycurrentThe sequence number of the most recent usdLogMsgTable entry. By monitoring this object's rate of change in relation to the usdLogMsgTable capacity, a managemen…
1.3.6.1.4.1.4874.2.2.28.1.3.2TableusdLogMsgTablenot-accessiblecurrentA table of log messages generated by this device.
1.3.6.1.4.1.4874.2.2.28.1.3.2.1RowusdLogMsgEntrynot-accessiblecurrentA log message generated by this device.
1.3.6.1.4.1.4874.2.2.28.1.3.2.1.1ColumnusdLogMsgSysUpTimeStampnot-accessiblecurrentThe value of sysUpTime when this log message was recorded.
1.3.6.1.4.1.4874.2.2.28.1.3.2.1.2ColumnusdLogMsgSequenceNumbernot-accessiblecurrentA sequence number that uniquely identifies this entry. Sequence numbers are assigned consecutively beginning with 1. More recent entries have higher sequence n…
1.3.6.1.4.1.4874.2.2.28.1.3.2.1.3ColumnusdLogMsgCatNameread-onlycurrentName of the log category that contributed this message.
1.3.6.1.4.1.4874.2.2.28.1.3.2.1.4ColumnusdLogMsgCatIndexread-onlycurrentIndex of the log category that contributed this message.
1.3.6.1.4.1.4874.2.2.28.1.3.2.1.5ColumnusdLogMsgSeverityread-onlycurrentThe severity of the message.
1.3.6.1.4.1.4874.2.2.28.1.3.2.1.6ColumnusdLogMsgTextread-onlycurrentThe text of the log message. Truncation of log message text is indicated by n asterisk character ('*') in the last octet of a maximum-size string.
1.3.6.1.4.1.4874.2.2.28.1.3.2.1.7ColumnusdLogMsgDateAndTimeStampread-onlycurrentThe date and time this message was generated.
1.3.6.1.4.1.4874.2.2.28.2NodeusdLogTrapControl
1.3.6.1.4.1.4874.2.2.28.2.1ScalarusdLogMsgThresholdread-writecurrentNumber of log messages which, when added to usdLogMsgTable, cause a usdLogMsgThresholdTrap to be generated. This value is expressed as a percentage of the capa…
1.3.6.1.4.1.4874.2.2.28.4NodeusdLogMIBConformance
1.3.6.1.4.1.4874.2.2.28.4.1NodeusdLogMIBCompliances
1.3.6.1.4.1.4874.2.2.28.4.1.1ComplianceusdLogComplianceobsoleteThe compliance statement for entities which implement the Unisphere Networks, Inc. Log MIB.
1.3.6.1.4.1.4874.2.2.28.4.1.2ComplianceusdLogCompliance2currentThe compliance statement for entities which implement the Unisphere Networks. Log MIB., including support for multiple SYSLOG destinations.
1.3.6.1.4.1.4874.2.2.28.4.2NodeusdLogMIBGroups
1.3.6.1.4.1.4874.2.2.28.4.2.1GroupusdLogGroupobsoleteA collection of objects providing management of Unisphere Networks, Inc. logging capabilities.
1.3.6.1.4.1.4874.2.2.28.4.2.2GroupusdLogGroup2currentA collection of objects providing management of Unisphere Networks, Inc logging capabilities, including support for multiple SYSLOG destinations.
1.3.6.1.4.1.4874.2.2.28.4.2.3GroupusdLogTrapGroupcurrentA management notification pertaining to logging operations.
Type Definitions
NameSyntaxStatusDescription
UsdLogCatNameOCTET STRING (SIZE (1..32))currentThe name of a log category. Represents textual information taken from the NVT ASCII character set.
UsdLogSyslogFacilityINTEGER { local0(0), local1(1), local2(2), local3(3), local4(4), local5(5), local6(6), local7(7) }currentThe syslog daemon facility id.
UsdLogVerbosityINTEGER { low(0), medium(1), high(2) }currentThe log verbosity level. Not all event types offer medium- or high-verbosity levels of detail.