Unisphere-Data-OSPF-MIB
104 objects
The OSPF Protocol MIB for the Unisphere Networks Inc. enterprise.
Imported Objects
| IF-MIB | InterfaceIndex |
| OSPF-MIB | ospfAddressLessIf ospfAreaEntry ospfIfEntry ospfIfIpAddress ospfNbrEntry ospfVirtIfEntry |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | RowStatus TruthValue |
| Unisphere-Data-MIBs | usDataMibs |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4874.2.2.14 | IdentityusdOspfMIB | The OSPF Protocol MIB for the Unisphere Networks Inc. enterprise. | ||
| 1.3.6.1.4.1.4874.2.2.14.1 | NodeusdOspfObjects | |||
| 1.3.6.1.4.1.4874.2.2.14.1.1 | NodeusdOspfGeneralGroup | |||
| 1.3.6.1.4.1.4874.2.2.14.1.1.1 | ScalarusdOspfProcessId | read-write | current | An identifier having special semantics when set. When this object's value is zero, OSPF is disabled and cannot be configured. Setting this object to a nonzero … |
| 1.3.6.1.4.1.4874.2.2.14.1.1.2 | ScalarusdOspfMaxPathSplits | read-write | current | The maximum number of equal-cost routes that will be maintained by the OSPF protocol. A change in this value will be taken into account at the next shortest-pa… |
| 1.3.6.1.4.1.4874.2.2.14.1.1.3 | ScalarusdOspfSpfHoldInterval | read-write | current | The minimum amount of time that must elapse between shortest-path-first recalculations. Reducing this value can cause an immediate SPF recalulation if the new … |
| 1.3.6.1.4.1.4874.2.2.14.1.1.4 | ScalarusdOspfNumActiveAreas | read-only | current | The number of active areas. |
| 1.3.6.1.4.1.4874.2.2.14.1.1.5 | ScalarusdOspfSpfTime | read-only | current | The SPF schedule delay. |
| 1.3.6.1.4.1.4874.2.2.14.1.1.6 | ScalarusdOspfRefBw | read-write | current | The reference bandwith, in bits per second. This object is used when OSPF automatic interface cost calculation is used. |
| 1.3.6.1.4.1.4874.2.2.14.1.1.7 | ScalarusdOspfAutoVlink | read-write | current | Set this object to true(1) in order to have virtual links automatically configured. |
| 1.3.6.1.4.1.4874.2.2.14.1.1.8 | ScalarusdOspfIntraDistance | read-write | current | Default distance for intra-area routes. |
| 1.3.6.1.4.1.4874.2.2.14.1.1.9 | ScalarusdOspfInterDistance | read-write | current | Default distance for inter-area routes. |
| 1.3.6.1.4.1.4874.2.2.14.1.1.10 | ScalarusdOspfExtDistance | read-write | current | Default distance for external type 5 and type 7 routes. |
| 1.3.6.1.4.1.4874.2.2.14.1.1.11 | ScalarusdOspfHelloPktsRcv | read-only | current | Number of hello packets received. |
| 1.3.6.1.4.1.4874.2.2.14.1.1.12 | ScalarusdOspfDDPktsRcv | read-only | current | Number of database description packets received. |
| 1.3.6.1.4.1.4874.2.2.14.1.1.13 | ScalarusdOspfLsrPktsRcv | read-only | current | Number of link state request packets received. |
| 1.3.6.1.4.1.4874.2.2.14.1.1.14 | ScalarusdOspfLsuPktsRcv | read-only | current | Number of link state update packets received. |
| 1.3.6.1.4.1.4874.2.2.14.1.1.15 | ScalarusdOspfLsAckPktsRcv | read-only | current | Number of link state ACK packets received. |
| 1.3.6.1.4.1.4874.2.2.14.1.1.16 | ScalarusdOspfTotalRcv | read-only | current | Number of OSPF packets received. |
| 1.3.6.1.4.1.4874.2.2.14.1.1.17 | ScalarusdOspfLsaDiscardCnt | read-only | current | Number of LSA packets discarded. |
| 1.3.6.1.4.1.4874.2.2.14.1.1.18 | ScalarusdOspfHelloPktsSent | read-only | current | Number of hello packets sent. |
| 1.3.6.1.4.1.4874.2.2.14.1.1.19 | ScalarusdOspfDDPktsSent | read-only | current | Number of database description packets sent. |
| 1.3.6.1.4.1.4874.2.2.14.1.1.20 | ScalarusdOspfLsrPktsSent | read-only | current | Number of link state request packets sent. |
| 1.3.6.1.4.1.4874.2.2.14.1.1.21 | ScalarusdOspfLsuPktsSent | read-only | current | Number of link state update packets sent. |
| 1.3.6.1.4.1.4874.2.2.14.1.1.22 | ScalarusdOspfLsAckPktsSent | read-only | current | Number of link state ACK packets sent. |
| 1.3.6.1.4.1.4874.2.2.14.1.1.23 | ScalarusdOspfErrPktsSent | read-only | current | Number of packets dropped. |
| 1.3.6.1.4.1.4874.2.2.14.1.1.24 | ScalarusdOspfTotalSent | read-only | current | Number of OSPF packets sent. |
| 1.3.6.1.4.1.4874.2.2.14.1.1.25 | ScalarusdOspfCsumErrPkts | read-only | current | Number of packets received with a checksum error. |
| 1.3.6.1.4.1.4874.2.2.14.1.1.26 | ScalarusdOspfAllocFailNbr | read-only | current | Number of neighbor allocation failures. |
| 1.3.6.1.4.1.4874.2.2.14.1.1.27 | ScalarusdOspfAllocFailLsa | read-only | current | Number of LSA allocation failures. |
| 1.3.6.1.4.1.4874.2.2.14.1.1.28 | ScalarusdOspfAllocFailLsd | read-only | current | Number of LSA HDR allocation failures. |
| 1.3.6.1.4.1.4874.2.2.14.1.1.29 | ScalarusdOspfAllocFailDbRequest | read-only | current | Number of database request allocation failures. |
| 1.3.6.1.4.1.4874.2.2.14.1.1.30 | ScalarusdOspfAllocFailRtx | read-only | current | Number of RTX allocation failures. |
| 1.3.6.1.4.1.4874.2.2.14.1.1.31 | ScalarusdOspfAllocFailAck | read-only | current | Number of LS ACK allocation failures. |
| 1.3.6.1.4.1.4874.2.2.14.1.1.32 | ScalarusdOspfAllocFailDbPkt | read-only | current | Number of DD packet allocation failures. |
| 1.3.6.1.4.1.4874.2.2.14.1.1.33 | ScalarusdOspfAllocFailCirc | read-only | current | Number of OSPF interface allocation failures. |
| 1.3.6.1.4.1.4874.2.2.14.1.1.34 | ScalarusdOspfAllocFailPkt | read-only | current | Number of OSPF general packet allocation failures. |
| 1.3.6.1.4.1.4874.2.2.14.1.1.35 | ScalarusdOspfOperState | read-only | current | A flag to note whether this router is operational. |
| 1.3.6.1.4.1.4874.2.2.14.1.1.36 | ScalarusdOspfVpnRouteTag | read-write | current | VPN route tag value. |
| 1.3.6.1.4.1.4874.2.2.14.1.1.37 | ScalarusdOspfDomainId | read-write | current | OSPF domain ID. |
| 1.3.6.1.4.1.4874.2.2.14.1.1.38 | ScalarusdOspfMplsTeRtrIdIfIndex | read-write | current | Configure the stable router interface id to designate it as TE capable. |
| 1.3.6.1.4.1.4874.2.2.14.1.2 | TableusdOspfAreaTable | not-accessible | current | The Unisphere OSPF area table describes the OSPF-specific characteristics of areas. |
| 1.3.6.1.4.1.4874.2.2.14.1.2.1 | RowusdOspfAreaEntry | not-accessible | current | The OSPF area entry describes OSPF-specific characteristics of one area. |
| 1.3.6.1.4.1.4874.2.2.14.1.2.1.1 | ColumnusdOspfAreaType | read-only | current | The type of this area. |
| 1.3.6.1.4.1.4874.2.2.14.1.2.1.2 | ColumnusdOspfAreaTeCapable | read-write | current | Configure the specified area TE capable to flood the TE information. |
| 1.3.6.1.4.1.4874.2.2.14.1.7 | TableusdOspfIfTable | not-accessible | current | The Unisphere OSPF interface table describes the OSPF-specific characteristics of interfaces. |
| 1.3.6.1.4.1.4874.2.2.14.1.7.1 | RowusdOspfIfEntry | not-accessible | current | The OSPF interface entry describes OSPF-specific characteristics of one interface. |
| 1.3.6.1.4.1.4874.2.2.14.1.7.1.1 | ColumnusdOspfIfCost | read-create | current | The cost value for this interface. |
| 1.3.6.1.4.1.4874.2.2.14.1.7.1.2 | ColumnusdOspfIfMask | read-create | current | The mask used to derive the network range of this interface. |
| 1.3.6.1.4.1.4874.2.2.14.1.7.1.3 | ColumnusdOspfIfPassiveFlag | read-create | current | Flag to indicate whether routing updates should be suppressed on this interface. To actively perform routing updates, set this object to disabled(0). |
| 1.3.6.1.4.1.4874.2.2.14.1.7.1.4 | ColumnusdOspfIfNbrCount | read-only | current | Number of OSPF neighbors from this interface. |
| 1.3.6.1.4.1.4874.2.2.14.1.7.1.5 | ColumnusdOspfIfAdjNbrCount | read-only | current | Number of OSPF adjacent neighbors from this interface. |
| 1.3.6.1.4.1.4874.2.2.14.1.7.1.6 | ColumnusdOspfIfMd5AuthKey | read-create | current | The MD5 authentication key. When setting this object, the usdOspfIfMd5AuthKeyId must be specified on the same PDU. For simple text authentication type, use osp… |
| 1.3.6.1.4.1.4874.2.2.14.1.7.1.7 | ColumnusdOspfIfMd5AuthKeyId | read-create | current | The MD5 authentication key ID. When setting this object, usdOspfIfMd5AuthKey must be specified on the same PDU. |
| 1.3.6.1.4.1.4874.2.2.14.1.9 | TableusdOspfVirtIfTable | not-accessible | current | The Unisphere OSPF virtual interface table describes the OSPF-specific characteristics of virtual interfaces. |
| 1.3.6.1.4.1.4874.2.2.14.1.9.1 | RowusdOspfVirtIfEntry | not-accessible | current | The OSPF virtual interface entry describes OSPF-specific characteristics of one virtual interface. |
| 1.3.6.1.4.1.4874.2.2.14.1.9.1.1 | ColumnusdOspfVirtIfMd5AuthKey | read-create | current | The MD5 authentication key. When setting this object, the usdOspfVirtIfMd5AuthKeyId must be specified on the same PDU. For simple text authentication type, use… |
| 1.3.6.1.4.1.4874.2.2.14.1.9.1.2 | ColumnusdOspfVirtIfMd5AuthKeyId | read-create | current | The MD5 authentication key id. When setting this object, usdOspfVirtIfMd5AuthKey must be specified on the same psu. |
| 1.3.6.1.4.1.4874.2.2.14.1.10 | TableusdOspfNbrTable | not-accessible | current | The Unisphere OSPF neighbor table describes the OSPF-specific characteristics of neighbors. |
| 1.3.6.1.4.1.4874.2.2.14.1.10.1 | RowusdOspfNbrEntry | not-accessible | current | The OSPF neighbor entry describes OSPF-specific characteristics of one neighbor. |
| 1.3.6.1.4.1.4874.2.2.14.1.10.1.1 | ColumnusdOspfNbrLocalIpAddr | read-only | current | The local IP address on this OSPF circuit. |
| 1.3.6.1.4.1.4874.2.2.14.1.10.1.2 | ColumnusdOspfNbrDR | read-only | current | The neighbor's idea of designated router. |
| 1.3.6.1.4.1.4874.2.2.14.1.10.1.3 | ColumnusdOspfNbrBDR | read-only | current | The neighbor's idea of backup designated router. |
| 1.3.6.1.4.1.4874.2.2.14.1.15 | TableusdOspfSummImportTable | not-accessible | current | The Unisphere OSPF summary import table describes the OSPF-specific characteristics of network aggregation into the OSPF autonomous system. With this table, th… |
| 1.3.6.1.4.1.4874.2.2.14.1.15.1 | RowusdOspfSummImportEntry | not-accessible | current | The OSPF summary import entry describes OSPF-specific characteristics of one summary report. |
| 1.3.6.1.4.1.4874.2.2.14.1.15.1.1 | ColumnusdOspfSummAggNet | read-only | current | The summary address for a range of addresses. |
| 1.3.6.1.4.1.4874.2.2.14.1.15.1.2 | ColumnusdOspfSummAggMask | read-only | current | The subnet mask used for the summary route. |
| 1.3.6.1.4.1.4874.2.2.14.1.15.1.3 | ColumnusdOspfSummAdminStat | read-create | current | The admin status of this summary aggregation. |
| 1.3.6.1.4.1.4874.2.2.14.1.15.1.4 | ColumnusdOspfSummRowStatus | read-create | current | This variable displays the status of the entry. |
| 1.3.6.1.4.1.4874.2.2.14.1.16 | TableusdOspfMd5IntfTable | not-accessible | current | The Unisphere OSPF interface MD5 key table describes OSPF-specific characteristics of the MD5 authentication key for the OSPF interfaces. This table is not to … |
| 1.3.6.1.4.1.4874.2.2.14.1.16.1 | RowusdOspfMd5IntfEntry | not-accessible | current | The OSPF interface MD5 key entry describes OSPF-specific characteristics of one MD5 authentication's interface. |
| 1.3.6.1.4.1.4874.2.2.14.1.16.1.1 | ColumnusdOspfMd5IntfKeyId | read-only | current | The OSPF interface this key belongs to. |
| 1.3.6.1.4.1.4874.2.2.14.1.16.1.2 | ColumnusdOspfMd5IntfKeyActive | read-create | current | Set this object to true(1) in order to have this key active. |
| 1.3.6.1.4.1.4874.2.2.14.1.16.1.3 | ColumnusdOspfMd5IntfAuthKey | read-create | current | The MD5 authentication key. If key given has less than 16 octets, such value will be appended with zeros to complete 16 octets. The zeros will appended to the … |
| 1.3.6.1.4.1.4874.2.2.14.1.16.1.4 | ColumnusdOspfMd5IntfRowStatus | read-create | current | This variable displays the status of the entry. |
| 1.3.6.1.4.1.4874.2.2.14.1.17 | TableusdOspfMd5VirtIntfTable | not-accessible | current | The Unisphere OSPF interface MD5 key table describes OSPF-specific characteristics of the MD5 authentication key for the OSPF interfaces. This table is not to … |
| 1.3.6.1.4.1.4874.2.2.14.1.17.1 | RowusdOspfMd5VirtIntfEntry | not-accessible | current | The OSPF Interface MD5 Key entry describes OSPF-specific characteristics of one MD5 authentication's interface. |
| 1.3.6.1.4.1.4874.2.2.14.1.17.1.1 | ColumnusdOspfMd5VirtIntfAreaId | read-only | current | The OSPF area ID this key belongs to. |
| 1.3.6.1.4.1.4874.2.2.14.1.17.1.2 | ColumnusdOspfMd5VirtIntfNeighbor | read-only | current | The OSPF neightbor this key belongs to. |
| 1.3.6.1.4.1.4874.2.2.14.1.17.1.3 | ColumnusdOspfMd5VirtIntfKeyId | read-only | current | The OSPF virtual interface this key belongs to. |
| 1.3.6.1.4.1.4874.2.2.14.1.17.1.4 | ColumnusdOspfMd5VirtIntfKeyActive | read-create | current | Set this object to true(1) in order to have this key active. |
| 1.3.6.1.4.1.4874.2.2.14.1.17.1.5 | ColumnusdOspfMd5VirtIntfAuthKey | read-create | current | The MD5 authentication key. If key given has less than 16 octets, such value will be appended with zeros to complete 16 octets. The zeros will appended to the … |
| 1.3.6.1.4.1.4874.2.2.14.1.17.1.6 | ColumnusdOspfMd5VirtIntfRowStatus | read-create | current | This variable displays the status of the entry. |
| 1.3.6.1.4.1.4874.2.2.14.1.18 | TableusdOspfNetworkRangeTable | not-accessible | current | The Unisphere OSPF network range table describes the OSPF-specific characteristics of network ranges, encompassing one or multiple OSPF interfaces. |
| 1.3.6.1.4.1.4874.2.2.14.1.18.1 | RowusdOspfNetworkRangeEntry | not-accessible | current | The Unisphere OSPF network range entry describes OSPF-specific characteristics of one OSPF network range. |
| 1.3.6.1.4.1.4874.2.2.14.1.18.1.1 | ColumnusdOspfNetRangeNet | read-only | current | The network range address. |
| 1.3.6.1.4.1.4874.2.2.14.1.18.1.2 | ColumnusdOspfNetRangeMask | read-only | current | The subnet mask used for the network range. Unlike the mask used under the command line interface (CLI), this object is set in the non-inversed format (i.e. no… |
| 1.3.6.1.4.1.4874.2.2.14.1.18.1.3 | ColumnusdOspfNetRangeAreaId | read-only | current | The OSPF area ID this network range belongs to. |
| 1.3.6.1.4.1.4874.2.2.14.1.18.1.4 | ColumnusdOspfNetRangeRowStatus | read-create | current | This variable displays the status of the entry. |
| 1.3.6.1.4.1.4874.2.2.14.4 | NodeusdOspfConformance | |||
| 1.3.6.1.4.1.4874.2.2.14.4.1 | NodeusdOspfCompliances | |||
| 1.3.6.1.4.1.4874.2.2.14.4.1.1 | ComplianceusdOspfCompliance | obsolete | Obsolete compliance statement for entities which implement the Unisphere OSPF MIB. This statement became obsolete when usdOspfVpnRouteTag, usdOspfDomainId, usd… | |
| 1.3.6.1.4.1.4874.2.2.14.4.1.2 | ComplianceusdOspfCompliance2 | current | The compliance statement for entities which implement the Unisphere OSPF MIB. | |
| 1.3.6.1.4.1.4874.2.2.14.4.2 | NodeusdOspfGroups | |||
| 1.3.6.1.4.1.4874.2.2.14.4.2.1 | GroupusdOspfBasicGroup | obsolete | Obsolete collection of objects for managing general OSPF capabilities in a Unisphere product. This group became obsolete when usdOspfVpnRouteTag, usdOspfDomain… | |
| 1.3.6.1.4.1.4874.2.2.14.4.2.2 | GroupusdOspfIfGroup | current | A collection of objects which augments the standard MIB objects for managing OSPF Interface capabilities in a Unisphere product. | |
| 1.3.6.1.4.1.4874.2.2.14.4.2.3 | GroupusdOspfAreaGroup | current | An object which augments the standard MIB objects for managing OSPF areas capabilities in a Unisphere product. | |
| 1.3.6.1.4.1.4874.2.2.14.4.2.4 | GroupusdOspfVirtIfGroup | current | A collection of objects which augments the standard MIB objects for managing OSPF virtual interface capabilities in a Unisphere product. | |
| 1.3.6.1.4.1.4874.2.2.14.4.2.5 | GroupusdOspfNbrGroup | current | A collection of objects which augments the standard MIB objects for managing OSPF neighbor capabilities in a Unisphere product. | |
| 1.3.6.1.4.1.4874.2.2.14.4.2.6 | GroupusdOspfSummImportGroup | current | A collection of objects for managing OSPF summary report capabilities in a Unisphere product. | |
| 1.3.6.1.4.1.4874.2.2.14.4.2.7 | GroupusdOspfMd5IntfGroup | current | A collection of objects for managing OSPF MD5 interfaces capabilities in a Unisphere product. | |
| 1.3.6.1.4.1.4874.2.2.14.4.2.8 | GroupusdOspfMd5VirtIntfGroup | current | A collection of objects for managing OSPF MD5 virtual interfaces capabilities in a Unisphere product. | |
| 1.3.6.1.4.1.4874.2.2.14.4.2.9 | GroupusdOspfNetRangeGroup | current | A collection of objects for managing OSPF network range capabilities in a Unisphere product. | |
| 1.3.6.1.4.1.4874.2.2.14.4.2.10 | GroupusdOspfBasicGroup2 | current | A collection of objects for managing general OSPF capabilities in a Unisphere product. |