Unisphere-Data-PIM-MIB
152 objects
The enterprise MIB module for management of PIM routers.
Imported Objects
| IF-MIB | InterfaceIndex |
| PIM-MIB | pimInterfaceIfIndex pimRPSetAddress pimRPSetComponent pimRPSetGroupAddress pimRPSetGroupMask |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE TimeTicks |
| SNMPv2-TC | RowStatus TEXTUAL-CONVENTION TruthValue |
| Unisphere-Data-MIBs | usDataMibs |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4874.2.2.43 | IdentityusdPimMIB | The enterprise MIB module for management of PIM routers. | ||
| 1.3.6.1.4.1.4874.2.2.43.1 | NodeusdPimMIBObjects | |||
| 1.3.6.1.4.1.4874.2.2.43.1.0 | NodeusdPimTraps | |||
| 1.3.6.1.4.1.4874.2.2.43.1.1 | NodeusdPimGlobal | |||
| 1.3.6.1.4.1.4874.2.2.43.1.1.1 | ScalarusdPimNumHelloRcvd | read-only | current | Total number of Hellos received by PIM on this router. |
| 1.3.6.1.4.1.4874.2.2.43.1.1.2 | ScalarusdPimNumJoinPruneRcvd | read-only | current | Total number of JoinPrunes received by PIM on this router. |
| 1.3.6.1.4.1.4874.2.2.43.1.1.3 | ScalarusdPimNumAssertRcvd | read-only | current | Total number of Asserts received by PIM on this router. |
| 1.3.6.1.4.1.4874.2.2.43.1.1.4 | ScalarusdPimNumGraftRcvd | read-only | current | Total number of Grafts received by PIM on this router. |
| 1.3.6.1.4.1.4874.2.2.43.1.1.5 | ScalarusdPimNumGraftAckRcvd | read-only | current | Total number of Graft Acks received by PIM on this router. |
| 1.3.6.1.4.1.4874.2.2.43.1.1.6 | ScalarusdPimNumHelloSent | read-only | current | Total number of Hellos sent by PIM on this router. |
| 1.3.6.1.4.1.4874.2.2.43.1.1.7 | ScalarusdPimNumJoinPruneSent | read-only | current | Total number of JoinPrunes sent by PIM on this router. |
| 1.3.6.1.4.1.4874.2.2.43.1.1.8 | ScalarusdPimNumAssertSent | read-only | current | Total number of Asserts sent by PIM on this router. |
| 1.3.6.1.4.1.4874.2.2.43.1.1.9 | ScalarusdPimNumGraftSent | read-only | current | Total number of Grafts sent by PIM on this router. |
| 1.3.6.1.4.1.4874.2.2.43.1.1.10 | ScalarusdPimNumGraftAckSent | read-only | current | Total number of Graft Acks sent by PIM on this router. |
| 1.3.6.1.4.1.4874.2.2.43.1.1.11 | TableusdPimInterfaceTable | not-accessible | current | The (conceptual) table listing enterprise specific information on a subset of the rows of the pimInterfaceTable defined in the standard PIM MIB. |
| 1.3.6.1.4.1.4874.2.2.43.1.1.11.1 | RowusdPimInterfaceEntry | not-accessible | current | An entry (conceptual row) in the usdPimInterfaceTable. There is one entry per entry in the pimInterfaceTable. |
| 1.3.6.1.4.1.4874.2.2.43.1.1.11.1.1 | ColumnusdPimIntfNumHelloRcvd | read-write | current | Total number of Hellos received by PIM on this interface. It can only be cleared to 0 when doing set. Setting this also sets counters for other types of packet… |
| 1.3.6.1.4.1.4874.2.2.43.1.1.11.1.2 | ColumnusdPimIntfNumJoinPruneRcvd | read-write | current | Total number of JoinPrunes received by PIM on this interface. It can only be cleared to 0 when doing set. Setting this also sets counters for other types of pa… |
| 1.3.6.1.4.1.4874.2.2.43.1.1.11.1.3 | ColumnusdPimIntfNumAssertRcvd | read-write | current | Total number of Asserts received by PIM on this interface. It can only be cleared to 0 when doing set. Setting this also sets counters for other types of packe… |
| 1.3.6.1.4.1.4874.2.2.43.1.1.11.1.4 | ColumnusdPimIntfNumGraftRcvd | read-write | current | Total number of Grafts received by PIM on this interface. It can only be cleared to 0 when doing set. Setting this also sets counters for other types of packet… |
| 1.3.6.1.4.1.4874.2.2.43.1.1.11.1.5 | ColumnusdPimIntfNumGraftAckRcvd | read-write | current | Total number of Graft Acks received by PIM on this interface. It can only be cleared to 0 when doing set. Setting this also sets counters for other types of pa… |
| 1.3.6.1.4.1.4874.2.2.43.1.1.11.1.6 | ColumnusdPimIntfNumHelloSent | read-write | current | Total number of Hellos sent by PIM on this interface. It can only be cleared to 0 when doing set. Setting this also sets counters for other types of packets to… |
| 1.3.6.1.4.1.4874.2.2.43.1.1.11.1.7 | ColumnusdPimIntfNumJoinPruneSent | read-write | current | Total number of JoinPrunes sent by PIM on this interface. It can only be cleared to 0 when doing set. Setting this also sets counters for other types of packet… |
| 1.3.6.1.4.1.4874.2.2.43.1.1.11.1.8 | ColumnusdPimIntfNumAssertSent | read-write | current | Total number of Asserts sent by PIM on this interface. It can only be cleared to 0 when doing set. Setting this also sets counters for other types of packets t… |
| 1.3.6.1.4.1.4874.2.2.43.1.1.11.1.9 | ColumnusdPimIntfNumGraftSent | read-write | current | Total number of Grafts sent by PIM on this interface. It can only be cleared to 0 when doing set. Setting this also sets counters for other types of packets to… |
| 1.3.6.1.4.1.4874.2.2.43.1.1.11.1.10 | ColumnusdPimIntfNumGraftAckSent | read-write | current | Total number of Graft Acks sent by PIM on this interface. It can only be cleared to 0 when doing set. Setting this also sets counters for other types of packet… |
| 1.3.6.1.4.1.4874.2.2.43.1.1.11.1.11 | ColumnusdPimIntfVersion | read-only | current | The version of PIM running on this interface. |
| 1.3.6.1.4.1.4874.2.2.43.1.1.11.1.12 | ColumnusdPimIntfNumNbrs | read-only | current | Number of PIM neighbors detected on this interface. |
| 1.3.6.1.4.1.4874.2.2.43.1.1.12 | TableusdPimMRouteTable | not-accessible | current | The (conceptual) table listing PIM multicast routing information describing its <*, *, RP>/ <*, G>/ <S, G> states. |
| 1.3.6.1.4.1.4874.2.2.43.1.1.12.1 | RowusdPimMRouteEntry | not-accessible | current | An entry (conceptual row) in the usdPimMRouteTable. |
| 1.3.6.1.4.1.4874.2.2.43.1.1.12.1.1 | ColumnusdPimMRouteGroup | not-accessible | current | The group address. Specified as 224.0.0.0 for <*, *, RP> entries. |
| 1.3.6.1.4.1.4874.2.2.43.1.1.12.1.2 | ColumnusdPimMRouteSource | not-accessible | current | The source address. Specified as 0.0.0.0 for <*, *, RP> and <*, G> entries. |
| 1.3.6.1.4.1.4874.2.2.43.1.1.12.1.3 | ColumnusdPimMRouteSourceMask | not-accessible | current | The source address mask. Specified as 255.255.255.255 for <S, G> entries and 0.0.0.0 for <*, *, RP> and <*, G> entries. |
| 1.3.6.1.4.1.4874.2.2.43.1.1.12.1.4 | ColumnusdPimMRouteRPAddress | not-accessible | current | The RP address used for <*, *, RP>. Specified as 0.0.0.0 for <S, G> and <*, G> entries. |
| 1.3.6.1.4.1.4874.2.2.43.1.1.12.1.5 | ColumnusdPimMRouteUpstreamAssertTimer | read-only | current | The time remaining before the router changes its upstream neighbor back to its RPF neighbor. This timer is called the Assert timer in the PIM Sparse and Dense … |
| 1.3.6.1.4.1.4874.2.2.43.1.1.12.1.6 | ColumnusdPimMRouteAssertMetric | read-only | current | The metric advertised by the assert winner on the upstream interface, or 0 if no such assert is in received. |
| 1.3.6.1.4.1.4874.2.2.43.1.1.12.1.7 | ColumnusdPimMRouteAssertPref | read-only | current | The preference advertised by the assert winner on the upstream interface, or 0 if no such assert is in effect. |
| 1.3.6.1.4.1.4874.2.2.43.1.1.12.1.8 | ColumnusdPimMRouteAssertRPTBit | read-only | current | The value of the RPT-bit advertised by the assert winner on the upstream interface, or false if no such assert is in effect. |
| 1.3.6.1.4.1.4874.2.2.43.1.1.12.1.9 | ColumnusdPimMRouteBits | read-only | current | This object describes whether the entry is on shared tree (rpt) or shortest path tree (spt). |
| 1.3.6.1.4.1.4874.2.2.43.1.1.12.1.10 | ColumnusdPimMRouteRPAddrInUse | read-only | current | The RP Address being used for the <S, G>RPT/<*, G>/<*, *, RP> entries. Set to 0.0.0.0 for <S, G> entries on shortest path tree. |
| 1.3.6.1.4.1.4874.2.2.43.1.1.12.1.11 | ColumnusdPimMRouteUpstreamNbr | read-only | current | The address of upstream neighbor being used for the entry. Its set to 0.0.0.0 if the router is directly attached to source on one of its interface. |
| 1.3.6.1.4.1.4874.2.2.43.1.1.12.1.12 | ColumnusdPimMRouteIifAddr | read-only | current | The address of incoming interface for this entry. |
| 1.3.6.1.4.1.4874.2.2.43.1.1.12.1.13 | ColumnusdPimMRouteIsWaitingToSwitchToSPT | read-only | current | This object describes whether the entry is still waiting to switch completely to shortest path tree in case of <S, G> entries. It waits to do this till it rece… |
| 1.3.6.1.4.1.4874.2.2.43.1.1.12.1.14 | ColumnusdPimMRouteEntryExpiryTimer | read-only | current | The time after which the entry timer expires for this entry. Set to 0 if entry timer is not active. |
| 1.3.6.1.4.1.4874.2.2.43.1.1.12.1.15 | ColumnusdPimMRouteSenderDRAddr | read-only | current | The address of the designated router on the sender's subnet in case of <S, G> entries. The sender designated router register encapsulates data to RP. Set to 0.… |
| 1.3.6.1.4.1.4874.2.2.43.1.1.12.1.16 | ColumnusdPimMRouteRouteAddr | read-only | current | The address of the route being used to do RPF check for this entry. It is set to 0.0.0.0 (with usdPimMRouteRouteMask set to 255.255.255.255) if there is no rou… |
| 1.3.6.1.4.1.4874.2.2.43.1.1.12.1.17 | ColumnusdPimMRouteRouteMask | read-only | current | The mask of the route being used to do RPF check for this entry. It is set to 255.255.255.255 (with usdPimMRouteRoute set to 0.0.0.0) if there is no route avai… |
| 1.3.6.1.4.1.4874.2.2.43.1.1.12.1.18 | ColumnusdPimMRouteGRPAddr | read-only | current | The address of the group-to-RP mapping being used to get the RP for this entry. It is set to 0.0.0.0 (with usdPimMRouteGRPMask set to 0.0.0.0) if there is no g… |
| 1.3.6.1.4.1.4874.2.2.43.1.1.12.1.19 | ColumnusdPimMRouteGRPMask | read-only | current | The mask of the group-to-RP mapping being used to get the RP for this entry. It is set to 255.255.255.255 (with usdPimMRouteGRPAddr set to 0.0.0.0) if there is… |
| 1.3.6.1.4.1.4874.2.2.43.1.1.12.1.20 | ColumnusdPimMRouteOtherProtoOifJoinTypeAll | read-only | current | This object indicates if some other multicast protocol is also interested in receiving data for this entry as a result of its interest in receiving all data. T… |
| 1.3.6.1.4.1.4874.2.2.43.1.1.12.1.21 | ColumnusdPimMRouteOtherProtoOifJoinTypeG | read-only | current | This object indicates if some other multicast protocol is also interested in receiving data for this entry as a result of its interest in receiving data for a … |
| 1.3.6.1.4.1.4874.2.2.43.1.1.12.1.22 | ColumnusdPimMRouteOtherProtoOifJoinTypeSG | read-only | current | This object indicates if some other multicast protocol is also interested in receiving data for this entry as a result of its interest in receiving data for a … |
| 1.3.6.1.4.1.4874.2.2.43.1.1.12.1.23 | ColumnusdPimMRoutePimType | read-only | current | This object indicates if the owner of this entry is Sparse mode or Dense mode PIM. Owner is usually determined by the protocol running on the incoming interfac… |
| 1.3.6.1.4.1.4874.2.2.43.1.1.13 | TableusdPimMRouteNextHopTable | not-accessible | current | The (conceptual) table listing PIM multicast routing information describing its <*, *, RP>/ <*, G>/ <S, G> outgoing interfaces. |
| 1.3.6.1.4.1.4874.2.2.43.1.1.13.1 | RowusdPimMRouteNextHopEntry | not-accessible | current | An entry (conceptual row) in the usdPimMRouteNextHopTable. |
| 1.3.6.1.4.1.4874.2.2.43.1.1.13.1.2 | ColumnusdPimMRouteNextHopGroupAddr | not-accessible | current | The group address. Specified as 224.0.0.0 for <*, *, RP> entries. |
| 1.3.6.1.4.1.4874.2.2.43.1.1.13.1.3 | ColumnusdPimMRouteNextHopSrcAddr | not-accessible | current | The source address. Specified as 0.0.0.0 for <*, *, RP> and <*, G> entries. |
| 1.3.6.1.4.1.4874.2.2.43.1.1.13.1.4 | ColumnusdPimMRouteNextHopSrcMask | not-accessible | current | The source address mask. Specified as 255.255.255.255 for <S, G> entries and 0.0.0.0 for <*, *, RP> and <*, G> entries. |
| 1.3.6.1.4.1.4874.2.2.43.1.1.13.1.5 | ColumnusdPimMRouteNextHopRPAddr | not-accessible | current | The RP address used for <*, *, RP>. Specified as 0.0.0.0 for <S, G> and <*, G> entries. |
| 1.3.6.1.4.1.4874.2.2.43.1.1.13.1.6 | ColumnusdPimMRouteNextHopIfId | not-accessible | current | The interface index of the outgoing interface (next hop). Specified as 0 for register outgoing interface. Register outgoing interfaces are created by DR on the… |
| 1.3.6.1.4.1.4874.2.2.43.1.1.13.1.7 | ColumnusdPimMRouteNextHopAddress | not-accessible | current | This object takes following different values based on the type of next hop. It should be set to the address of RP in case the next hop interface is register in… |
| 1.3.6.1.4.1.4874.2.2.43.1.1.13.1.8 | ColumnusdPimMRouteNextHopPruneReason | read-only | current | This object indicates why the downstream interface was pruned, whether in response to a PIM prune message or due to PIM Assert processing. |
| 1.3.6.1.4.1.4874.2.2.43.1.1.13.1.9 | ColumnusdPimMRouteNextHopJoinTypeSSRP | read-only | current | This object indicates whether or not the interface was added as a result of receiving <*, *, RP> join in case of <*, *, RP> entry OR inherited as outgoing inte… |
| 1.3.6.1.4.1.4874.2.2.43.1.1.13.1.10 | ColumnusdPimMRouteNextHopJoinTypeG | read-only | current | This object indicates whether or not the interface was added as a result of receiving <*, G> join in case of <*, G> entry OR inherited as outgoing interface fr… |
| 1.3.6.1.4.1.4874.2.2.43.1.1.13.1.11 | ColumnusdPimMRouteNextHopJoinTypeSG | read-only | current | This object indicates whether or not the interface was added as a result of receiving <S, G> join in case of <S, G> entry. |
| 1.3.6.1.4.1.4874.2.2.43.1.1.13.1.12 | ColumnusdPimMRouteNextHopHasLGM | read-only | current | This object indicates whether or not the interface has local group membership (as indicated by IGMP) in case of <*, G> and <S, G> entries. |
| 1.3.6.1.4.1.4874.2.2.43.1.1.13.1.13 | ColumnusdPimMRouteNextHopHasOifAW | read-only | current | This object indicates whether or not this interface is the winner of assert for corresponding <*, G>/<S, G> entry. |
| 1.3.6.1.4.1.4874.2.2.43.1.1.13.1.14 | ColumnusdPimMRouteNextHopHasOifSendAssert | read-only | current | This object indicates whether or not this interface is going to send an assert at the end of assert suppression interval. Assert suppression is used to prevent… |
| 1.3.6.1.4.1.4874.2.2.43.1.1.13.1.15 | ColumnusdPimMRouteNextHopHasOifRegister | read-only | current | This object indicates whether or not this next hop is a register outgoing interface. |
| 1.3.6.1.4.1.4874.2.2.43.1.1.13.1.16 | ColumnusdPimMRouteNextHopHasOifBorderBit | read-only | current | This object is used to describe a register outgoing interface. It indicates whether or not the border bit is set in the register packet when the packet is sent… |
| 1.3.6.1.4.1.4874.2.2.43.1.1.13.1.17 | ColumnusdPimMRouteNextHopHasOifNullEncapsBit | read-only | current | This object is used to describe a register outgoing interface. It indicates whether or not the NULL encapsulation bit is set (periodically) in the register pac… |
| 1.3.6.1.4.1.4874.2.2.43.1.1.13.1.18 | ColumnusdPimMRouteNextHopJoinEndTimer | read-only | current | This object indicates the time (in seconds) left when the join timer expires for the outgoing interface. Join timer for an outgoing interface of <S, G> entry i… |
| 1.3.6.1.4.1.4874.2.2.43.1.1.13.1.19 | ColumnusdPimMRouteNextHopAssertEndTimer | read-only | current | This object indicates the time (in seconds) left when the assert timer expires on this outgoing inteface. |
| 1.3.6.1.4.1.4874.2.2.43.1.1.13.1.20 | ColumnusdPimMRouteNextHopNextAssertTimer | read-only | current | This object indicates the duration (in seconds) left for which sending an assert has been suppressed on this outgoing interface. |
| 1.3.6.1.4.1.4874.2.2.43.1.1.13.1.21 | ColumnusdPimMRouteNextHopAssertSrcAddress | read-only | current | This object indicates the source address which will be used in the assert packet to send an assert out for the entry on this outgoing interface. For <S, G> ent… |
| 1.3.6.1.4.1.4874.2.2.43.1.1.13.1.22 | ColumnusdPimMRouteNextHopRegisterSuppressionTimer | read-only | current | This object is used for register outgoing interfaces. It indicates the duration (in seconds) left for which sending a register packet has been suppressed on th… |
| 1.3.6.1.4.1.4874.2.2.43.1.1.13.1.23 | ColumnusdPimMRouteNextHopPimType | read-only | current | This object indicates whether the outgoing interface was contributed by sparse-mode or dense-mode PIM. |
| 1.3.6.1.4.1.4874.2.2.43.1.1.13.1.24 | ColumnusdPimMRouteNextHopPruneTimeLeft | read-only | current | This object indicates the time (in seconds) left when the prune timer expires on an outgoing inteface. Its used for pruned outgoing interfaces contributed by d… |
| 1.3.6.1.4.1.4874.2.2.43.1.1.13.1.25 | ColumnusdPimMRouteNextHopsendingIpAddress | read-only | current | This object describes the source IP address used by this interface to send PIM packets out on this outgoing interface. |
| 1.3.6.1.4.1.4874.2.2.43.1.1.14 | TableusdPimRPSetTable | not-accessible | current | The (conceptual) table listing enterprise specific information on a subset of the rows of the pimRPSetTable defined in the standard PIM MIB. |
| 1.3.6.1.4.1.4874.2.2.43.1.1.14.1 | RowusdPimRPSetEntry | not-accessible | current | An entry (conceptual row) in the usdPimRPSetTable. |
| 1.3.6.1.4.1.4874.2.2.43.1.1.14.1.1 | ColumnusdPimRPSetPriority | read-only | current | This object describes the priority of the RP for this group-to-RP mapping. |
| 1.3.6.1.4.1.4874.2.2.43.1.1.14.1.2 | ColumnusdPimRPSetTypeInfo | read-only | current | This object describes the mechanism by which this group to RP mapping has been learnt, i.e. whether its statically configured, AutoRP learnt or BSR learnt. It … |
| 1.3.6.1.4.1.4874.2.2.43.1.1.14.1.3 | ColumnusdPimRPSetAccessListName | read-only | current | This object lists the name of the access list from which this group-to-RP mapping was picked up in case of statically configured RPs. |
| 1.3.6.1.4.1.4874.2.2.43.1.1.15 | TableusdPimStaticRPConfTable | not-accessible | current | The (conceptual) table listing statically configured PIM RPs. |
| 1.3.6.1.4.1.4874.2.2.43.1.1.15.1 | RowusdPimStaticRPConfEntry | not-accessible | current | An entry (conceptual row) in the usdPimStaticRPConfTable. |
| 1.3.6.1.4.1.4874.2.2.43.1.1.15.1.1 | ColumnusdPimStaticRPConfComponentIndex | not-accessible | current | A number uniquely identifying the component. Each protocol instance connected to a separate domain should have a different index value. |
| 1.3.6.1.4.1.4874.2.2.43.1.1.15.1.2 | ColumnusdPimStaticRPConfRPAddr | not-accessible | current | Ip address of the RP which for the group-to-RP mapping being configured. |
| 1.3.6.1.4.1.4874.2.2.43.1.1.15.1.3 | ColumnusdPimStaticRPConfAccessListName | not-accessible | current | Name of the access list from which group-ranges are picked up for this group-ro-RP mapping. Every deny component in the list is added as negative group-ro-RP m… |
| 1.3.6.1.4.1.4874.2.2.43.1.1.15.1.4 | ColumnusdPimStaticRPConfRowStatus | read-create | current | The status of this row, by which new entries may be created, or old entries deleted from this table. |
| 1.3.6.1.4.1.4874.2.2.43.1.1.15.1.5 | ColumnusdPimStaticRPConfOverride | read-create | current | The object indicates whether or not this statically configured group-to-RP mapping should override the group-to-RP mapping learnt via AutoRP for the component … |
| 1.3.6.1.4.1.4874.2.2.43.1.1.16 | TableusdPimAutoRPConfTable | not-accessible | current | The (conceptual) table allowing AutoRP configuration of candidate RPs (advertisement agents). |
| 1.3.6.1.4.1.4874.2.2.43.1.1.16.1 | RowusdPimAutoRPConfEntry | not-accessible | current | An entry (conceptual row) in the usdPimAutoRPConfTable. |
| 1.3.6.1.4.1.4874.2.2.43.1.1.16.1.1 | ColumnusdPimAutoRPConfComponentIndex | not-accessible | current | A number uniquely identifying the component. Each protocol instance connected to a separate domain should have a different index value. |
| 1.3.6.1.4.1.4874.2.2.43.1.1.16.1.2 | ColumnusdPimAutoRPConfCandRPAddr | not-accessible | current | The IP address of the candidate RP for this advertising agent configuration. |
| 1.3.6.1.4.1.4874.2.2.43.1.1.16.1.3 | ColumnusdPimAutoRPConfGroupAccessListName | not-accessible | current | The access list name from which group ranges are picked up for advertising agent configuration. |
| 1.3.6.1.4.1.4874.2.2.43.1.1.16.1.4 | ColumnusdPimAutoRPConfRowStatus | read-create | current | The status of this row, by which new entries may be created, or old entries deleted from this table. |
| 1.3.6.1.4.1.4874.2.2.43.1.1.16.1.5 | ColumnusdPimAutoRPConfTTL | read-create | current | The time-to-live value used while sending AutoRP advertisement out for this group-to-RP mappings created as a result of this configuration. This should be set … |
| 1.3.6.1.4.1.4874.2.2.43.1.1.16.1.6 | ColumnusdPimAutoRPConfAncmntIntvl | read-create | current | The time interval at which AutoRP advertisements are sent out for the group-to-RP mappings created as a result of this configuration. This should be set along … |
| 1.3.6.1.4.1.4874.2.2.43.1.1.16.1.7 | ColumnusdPimAutoRPConfifId | read-only | current | The interface index of the interface for the candidate RP if an interface with that address exists else it is set to 0. |
| 1.3.6.1.4.1.4874.2.2.43.1.1.17 | TableusdPimAutoRPCandTable | not-accessible | current | The (conceptual) table listing AutoRP candidate RPS (advertising agents). |
| 1.3.6.1.4.1.4874.2.2.43.1.1.17.1 | RowusdPimAutoRPCandEntry | not-accessible | current | An entry (conceptual row) in the usdPimAutoRPCandTable. |
| 1.3.6.1.4.1.4874.2.2.43.1.1.17.1.1 | ColumnusdPimAutoRPCandComponentIndex | not-accessible | current | A number uniquely identifying the component. Each protocol instance connected to a separate domain should have a different index value. |
| 1.3.6.1.4.1.4874.2.2.43.1.1.17.1.2 | ColumnusdPimAutoRPCandRPAddr | not-accessible | current | The IP address of the candidate RP for this group-to-RP mapping. |
| 1.3.6.1.4.1.4874.2.2.43.1.1.17.1.3 | ColumnusdPimAutoRPCandGroupAddr | not-accessible | current | The group address of the candidate RP for this group-to-RP mapping. |
| 1.3.6.1.4.1.4874.2.2.43.1.1.17.1.4 | ColumnusdPimAutoRPCandGroupMask | not-accessible | current | The group mask of the candidate RP for this group-to-RP mapping. |
| 1.3.6.1.4.1.4874.2.2.43.1.1.17.1.5 | ColumnusdPimAutoRPCandRowStatus | read-only | current | The current status of this row. |
| 1.3.6.1.4.1.4874.2.2.43.1.1.17.1.6 | ColumnusdPimAutoRPCandAccessListName | read-only | current | The name of the group list using which this AutoRP group-to-RP candidate RP mapping was configured. |
| 1.3.6.1.4.1.4874.2.2.43.1.1.17.1.7 | ColumnusdPimAutoRPCandAutoRPTTL | read-only | current | The time-to-live value used while sending AutoRP advertisement out for this group-to-RP mapping. |
| 1.3.6.1.4.1.4874.2.2.43.1.1.17.1.8 | ColumnusdPimAutoRPCandAutoRPAncmntIntvl | read-only | current | The time interval at which AutoRP advertisements are sent out for this group-to-RP mapping. |
| 1.3.6.1.4.1.4874.2.2.43.1.1.17.1.9 | ColumnusdPimAutoRPCandIfId | read-only | current | The interface index of the interface for this AutoRP group-to-RP candidate RP mapping if an interface for RP address exists else it is set to 0. |
| 1.3.6.1.4.1.4874.2.2.43.1.1.18 | TableusdPimComponentTable | not-accessible | current | The (conceptual) table listing each component (domain) in PIM. |
| 1.3.6.1.4.1.4874.2.2.43.1.1.18.1 | RowusdPimComponentEntry | not-accessible | current | An entry (conceptual row) in the usdPimComponentTable. |
| 1.3.6.1.4.1.4874.2.2.43.1.1.18.1.1 | ColumnusdPimComponentIndex | not-accessible | current | A number uniquely identifying the component. Each protocol instance connected to a separate domain should have a different index value. |
| 1.3.6.1.4.1.4874.2.2.43.1.1.18.1.2 | ColumnusdPimComponentAutoRPMappingAgentRowStatus | read-create | current | The status of AutoRP mapping agent by which this router can be made an AutoRP mapping agent or removed from being an AutoRP mapping agent in this component. |
| 1.3.6.1.4.1.4874.2.2.43.1.1.18.1.3 | ColumnusdPimComponentConfiguredAutoRPMappingAgentIfId | read-create | current | The interface index of the interface which mapping agent should use to send AutoRP mapping messages. If not specified, the interface with highest IP address in… |
| 1.3.6.1.4.1.4874.2.2.43.1.1.18.1.4 | ColumnusdPimComponentAutoRPMappingAgentInterval | read-create | current | The time interval at which AutoRP mapping messages are sent out in this component. The default value is 60 seconds. |
| 1.3.6.1.4.1.4874.2.2.43.1.1.18.1.5 | ColumnusdPimComponentAutoRPMappingTTL | read-create | current | The time-to-live value used while sending AutoRP mapping messages out in this component. |
| 1.3.6.1.4.1.4874.2.2.43.1.1.18.1.6 | ColumnusdPimComponentAutoRPMappingAgentIntfAddr | read-only | current | The IP address of the interface which mapping agent is using to send AutoRP mapping messages. |
| 1.3.6.1.4.1.4874.2.2.43.1.1.18.1.7 | ColumnusdPimComponentAutoRPMappingAgentWinnerAddr | read-only | current | The IP address of the winner AutoRP mapping agent. There can be multiple mapping agents configured in a given PIM domain(component). The mapping agent with hig… |
| 1.3.6.1.4.1.4874.2.2.43.1.1.18.1.8 | ColumnusdPimComponentAutoRPMappingAgentWinnerLastHeard | read-only | current | The time (in seconds) that has past since an AutoRP mapping message was receieved from the winner AutoRP mapping agent. If the router itself is the winner, the… |
| 1.3.6.1.4.1.4874.2.2.43.1.1.19 | TableusdPimUnicastRouteTable | not-accessible | current | The (conceptual) table listing all the unicast routes currently in use by PIM for diong RPF checking. |
| 1.3.6.1.4.1.4874.2.2.43.1.1.19.1 | RowusdPimUnicastRouteEntry | not-accessible | current | An entry (conceptual row) in the usdPimUnicastRouteTable. |
| 1.3.6.1.4.1.4874.2.2.43.1.1.19.1.1 | ColumnusdPimUnicastRouteEntryAddr | not-accessible | current | The address of route in use. |
| 1.3.6.1.4.1.4874.2.2.43.1.1.19.1.2 | ColumnusdPimUnicastRouteEntryMask | not-accessible | current | The mask of route in use. |
| 1.3.6.1.4.1.4874.2.2.43.1.1.19.1.3 | ColumnusdPimUnicastRouteEntryRpfNbr | read-only | current | The RPF neighbor (next-hop) to reach the route of this entry. It is set to 0.0.0.0 for directly connected routes. |
| 1.3.6.1.4.1.4874.2.2.43.1.1.19.1.4 | ColumnusdPimUnicastRouteEntryIifId | read-only | current | The interface index (next-hop) to reach the route of this entry. |
| 1.3.6.1.4.1.4874.2.2.43.1.1.19.1.5 | ColumnusdPimUnicastRouteEntryIifAddr | read-only | current | The interface address (next-hop) to reach the route of this entry. |
| 1.3.6.1.4.1.4874.2.2.43.1.1.19.1.6 | ColumnusdPimUnicastRouteEntryPref | read-only | current | The preference of the route of this entry. |
| 1.3.6.1.4.1.4874.2.2.43.1.1.19.1.7 | ColumnusdPimUnicastRouteEntryMetric | read-only | current | The metric of the route of this entry. |
| 1.3.6.1.4.1.4874.2.2.43.1.1.19.1.8 | ColumnusdPimUnicastRouteEntryPimType | read-only | current | This object indicates whether the route specified in this entry is being used by sparse-mode and/or dense-mode PIM. |
| 1.3.6.1.4.1.4874.2.2.43.1.1.20 | TableusdPimSPTThresholdTable | not-accessible | current | The (conceptual) table listing threshold values set for switching from shared tree to shortest path tree and vice versa for data forwarded by PIM sparse-mode. |
| 1.3.6.1.4.1.4874.2.2.43.1.1.20.1 | RowusdPimSPTThresholdEntry | not-accessible | current | An entry (conceptual row) in the usdPimSPTThresholdTable. |
| 1.3.6.1.4.1.4874.2.2.43.1.1.20.1.1 | ColumnusdPimSPTThresholdAccessListName | not-accessible | current | The name of the access list from which group ranges are picked up for setting SPT threshold in this entry. |
| 1.3.6.1.4.1.4874.2.2.43.1.1.20.1.2 | ColumnusdPimSPTThresHoldRowStatus | read-write | current | The status of this row, by which new entries may be created, or old entries deleted from this table. |
| 1.3.6.1.4.1.4874.2.2.43.1.1.20.1.3 | ColumnusdPimSPTThresholdKbps | read-write | current | The value of SPT threshold in kilobits per second. Default value is 0. |
| 1.3.6.1.4.1.4874.2.2.43.2 | NodeusdPimConformance | |||
| 1.3.6.1.4.1.4874.2.2.43.2.1 | NodeusdPimCompliances | |||
| 1.3.6.1.4.1.4874.2.2.43.2.1.1 | ComplianceusdPimCompliance | current | The compliance statement for entities which implement the Unisphere PIM MIB. | |
| 1.3.6.1.4.1.4874.2.2.43.2.2 | NodeusdPimGroups | |||
| 1.3.6.1.4.1.4874.2.2.43.2.2.1 | GroupusdPimGeneralGroup | current | A collection of objects for managing general PIM capabilities in a Unisphere product. | |
| 1.3.6.1.4.1.4874.2.2.43.2.2.2 | GroupusdPimInterfaceGroup | current | A collection of objects for managing PIM interface capabilities in a Unisphere product. | |
| 1.3.6.1.4.1.4874.2.2.43.2.2.3 | GroupusdPimMRouteConfGroup | current | A collection of objects for managing PIM multicast route capabilities in a Unisphere product. | |
| 1.3.6.1.4.1.4874.2.2.43.2.2.4 | GroupusdPimMRouteNextHopGroup | current | A collection of objects for managing PIM multicast route next hop capabilities in a Unisphere product. | |
| 1.3.6.1.4.1.4874.2.2.43.2.2.5 | GroupusdPimRPSetGroup | current | A collection of objects for managing PIM RP-Set capabilities in a Unisphere product. | |
| 1.3.6.1.4.1.4874.2.2.43.2.2.6 | GroupusdPimStaticRPConfGroup | current | A collection of objects for managing statically configured PIM RPs capabilities in a Unisphere product. | |
| 1.3.6.1.4.1.4874.2.2.43.2.2.7 | GroupusdPimAutoRPConfGroup | current | A collection of objects for managing PIM AutoRP candidate advertisment agent RP capabilities in a Unisphere product. | |
| 1.3.6.1.4.1.4874.2.2.43.2.2.8 | GroupusdPimAutoRPCandGroup | current | A collection of objects for managing PIM AutoRP candidate advertising agent RP capabilities in a Unisphere product. | |
| 1.3.6.1.4.1.4874.2.2.43.2.2.9 | GroupusdPimComponentGroup | current | A collection of objects for managing PIM component (domain) capabilities in a Unisphere product. | |
| 1.3.6.1.4.1.4874.2.2.43.2.2.10 | GroupusdPimUnicastRouteGroup | current | A collection of objects for managing PIM unicast route capabilities in a Unisphere product. | |
| 1.3.6.1.4.1.4874.2.2.43.2.2.11 | GroupusdPimSPTThresholdGroup | current | A collection of objects for managing PIM shortest path tree threshold capabilities in a Unisphere product. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| UsdPimType | INTEGER { invalid(0), dense(1), sparse(2), sparseAndDense(3) } | current | This data type is used do identify Sparse mode and Dense mode PIM protocol. |