Unisphere-Data-SNMP-MIB
65 objects
MIB objects for configuring SNMP-based management access into Juniper routing switch products.
Imported Objects
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | RowStatus TEXTUAL-CONVENTION TruthValue |
| Unisphere-Data-MIBs | usDataMibs |
| Unisphere-Data-TC | UsdEnable |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4874.2.2.16 | IdentityusdSnmpMIB | MIB objects for configuring SNMP-based management access into Juniper routing switch products. | ||
| 1.3.6.1.4.1.4874.2.2.16.1 | NodeusdSnmpObjects | |||
| 1.3.6.1.4.1.4874.2.2.16.1.1 | NodeusdSnmpGeneral | |||
| 1.3.6.1.4.1.4874.2.2.16.1.1.1 | ScalarusdSnmpMaxPduSize | read-write | current | The maximum sized SNMP PDU, in bytes, that this agent is capable of handling. The default is 1500 bytes. The possibility of IP fragmentation should be consider… |
| 1.3.6.1.4.1.4874.2.2.16.1.1.2 | ScalarusdSnmpInterfaceMode | read-write | obsolete | The interface table mode for the SNMP agent(s) associated with this system. usdSnmpInterfaceModeVerbose(1) - the standard ifTable, ifXTable and ifStackTable co… |
| 1.3.6.1.4.1.4874.2.2.16.1.1.3 | NodeusdSnmpInterfaceCompress | |||
| 1.3.6.1.4.1.4874.2.2.16.1.1.3.1 | ScalarusdSnmpIntfCompCompressed | read-write | current | true(1) - the standard ifTable, ifXTable and ifStackTable contain a subset of interface types. Certain interface types like HDLC and IP and others are excluded… |
| 1.3.6.1.4.1.4874.2.2.16.1.1.3.2 | ScalarusdSnmpIntfCompEnhanced | read-write | current | This object governs which interface types are visable to SNMP management clients that use the standard ifTable, ifXTable and ifStackTable. The object is a vari… |
| 1.3.6.1.4.1.4874.2.2.16.1.1.3.3 | ScalarusdSnmpIntfCompEnhancedDisplay | read-only | current | This object displays the excluded interface types in human readable form. Three dots (...) at the end of display string indicates that the output has been trun… |
| 1.3.6.1.4.1.4874.2.2.16.1.1.3.4 | ScalarusdSnmpIntfCompRestricted | read-write | current | This object governs which interface instances appear to SNMP management clients that use the standard ifTable, ifXTable and ifStackTable. The control is based … |
| 1.3.6.1.4.1.4874.2.2.16.1.1.3.5 | ScalarusdSnmpIntfCompRestrictedDisplay | read-only | current | This object displays the restrictions in human readable form. Three dots (...) at the end of display string indicates that the output has been truncated. |
| 1.3.6.1.4.1.4874.2.2.16.1.1.4 | ScalarusdSnmpProxyStatus | read-write | current | Enable/disable SNMP proxy between virtual routers. |
| 1.3.6.1.4.1.4874.2.2.16.1.2 | NodeusdSnmpCommunity | |||
| 1.3.6.1.4.1.4874.2.2.16.1.2.1 | TableusdSnmpCommunityTable | not-accessible | current | Table of SNMP management clients. Authentic SNMP clients are identified by a combination community name and IP address. Upon receipt of an SNMP request, this t… |
| 1.3.6.1.4.1.4874.2.2.16.1.2.1.1 | RowusdSnmpCommunityEntry | not-accessible | current | A table entry describing an authentic SNMP Community. |
| 1.3.6.1.4.1.4874.2.2.16.1.2.1.1.1 | ColumnusdSnmpCommunityName | read-only | current | An SNMP community name. |
| 1.3.6.1.4.1.4874.2.2.16.1.2.1.1.2 | ColumnusdSnmpCommunityRowStatus | read-create | current | Controls creation/deletion of entries in this table. Only 'createAndGo' and 'destroy' enumeration values are supported. |
| 1.3.6.1.4.1.4874.2.2.16.1.2.1.1.3 | ColumnusdSnmpCommunityPrivilege | read-create | current | The access privilege for an SNMP Community authenticated by this entry (used in conjunction with MIB view as specified via usdSnmpCommunityView). readOnly Read… |
| 1.3.6.1.4.1.4874.2.2.16.1.2.1.1.4 | ColumnusdSnmpCommunityAccessList | read-create | current | If nonzero, the number of an IP access list that describes the IP hosts permitted SNMP management access to this device via the corresponding community name co… |
| 1.3.6.1.4.1.4874.2.2.16.1.2.1.1.5 | ColumnusdSnmpCommunityAccessListName | read-create | current | If not null, the name of an IP access list that describes the IP hosts permitted SNMP management access to this device via the corresponding community name con… |
| 1.3.6.1.4.1.4874.2.2.16.1.2.1.1.6 | ColumnusdSnmpCommunityView | read-create | current | The view associated with an SNMP Community authenticated by this entry. everything Access to the entire MIB. user Access to non-administrative portions of MIB.… |
| 1.3.6.1.4.1.4874.2.2.16.1.3 | NodeusdSnmpTrap | |||
| 1.3.6.1.4.1.4874.2.2.16.1.3.1 | ScalarusdSnmpTrapGlobalFilter | read-write | current | This object provides global control over trap generation by this agent. For each bit position, a '1' or '0' indicates the corresponding trap category is enable… |
| 1.3.6.1.4.1.4874.2.2.16.1.3.2 | ScalarusdSnmpTrapSource | read-write | current | The ifIndex of the interface whose IP address is used as the source IP address for outbound SNMP traps. If zero, no interface is specified, the mechanism for s… |
| 1.3.6.1.4.1.4874.2.2.16.1.3.3 | TableusdSnmpTrapHostTable | not-accessible | current | Table of SNMP Trap recipient. |
| 1.3.6.1.4.1.4874.2.2.16.1.3.3.1 | RowusdSnmpTrapHostEntry | not-accessible | current | A table entry describing an SNMP Trap recipient. |
| 1.3.6.1.4.1.4874.2.2.16.1.3.3.1.1 | ColumnusdSnmpTrapHostIpAddress | read-only | current | IP address of an authorized SNMP Trap recipient. This must be a host IP address. |
| 1.3.6.1.4.1.4874.2.2.16.1.3.3.1.2 | ColumnusdSnmpTrapHostRowStatus | read-create | current | Controls creation/deletion of entries in this table. Only 'createAndGo' and 'destroy' enumeration values are supported. |
| 1.3.6.1.4.1.4874.2.2.16.1.3.3.1.3 | ColumnusdSnmpTrapHostUdpPort | read-create | current | The destination UDP port to which traps will be sent. |
| 1.3.6.1.4.1.4874.2.2.16.1.3.3.1.4 | ColumnusdSnmpTrapHostCommunity | read-create | current | An SNMP community name to be used in traps sent to this destination. |
| 1.3.6.1.4.1.4874.2.2.16.1.3.3.1.5 | ColumnusdSnmpTrapHostProtocolVersion | read-create | current | The format of the SNMP trap PDU to be sent to this trap destination. v1 Trap-PDU defined in RFC1157, encapsulated in the message structure also defined in RFC1… |
| 1.3.6.1.4.1.4874.2.2.16.1.3.3.1.6 | ColumnusdSnmpTrapHostFilter | read-create | current | Bit mask designating the specific trap types enabled for transmission to this trap destination. For each bit position, a '1' or '0' indicates the corresponding… |
| 1.3.6.1.4.1.4874.2.2.16.1.3.3.1.7 | ColumnusdSnmpTrapHostSends | read-only | current | The number of traps submitted for transmission to this destination. |
| 1.3.6.1.4.1.4874.2.2.16.1.3.3.1.8 | ColumnusdSnmpTrapHostDiscards | read-only | current | The number of trap requests that were discarded. A trap may be discarded because the trap type is either not a configured type in usdSnmpTrapHostFilter, or bec… |
| 1.3.6.1.4.1.4874.2.2.16.1.3.3.1.9 | ColumnusdSnmpTrapHostSeverityFilter | read-create | current | The minimum severity value an snmp trap must have in order to be forwarded to this host. |
| 1.3.6.1.4.1.4874.2.2.16.1.3.4 | ScalarusdSnmpTrapProxy | read-write | current | The configuration setting for snmp trap proxying. Enabling this management object configures the associated SNMP agent to proxy internally generated traps. Not… |
| 1.3.6.1.4.1.4874.2.2.16.1.3.5 | ScalarusdSnmpTrapTrapSeverity | accessible-for-notify | current | The severity level of the trap. |
| 1.3.6.1.4.1.4874.2.2.16.1.3.6 | ScalarusdSnmpTrapGlobalDiscards | read-only | current | The number of trap requests that were discarded. A trap may be discarded because the trap type is either not globally configured in usdSnmpTrapGlobalFilter, or… |
| 1.3.6.1.4.1.4874.2.2.16.1.3.7 | ScalarusdSnmpTrapGlobalSeverityFilter | read-write | current | Traps flow through two levels of filtering: global and then host. The value of this object defines the global minimum severity level a trap must have in order … |
| 1.3.6.1.4.1.4874.2.2.16.1.4 | NodeusdSnmpAuthFailId | |||
| 1.3.6.1.4.1.4874.2.2.16.1.4.1 | ScalarusdSnmpAuthFailIdIpAddress | accessible-for-notify | current | The source IP address contained in a received SNMP request that failed authentication. |
| 1.3.6.1.4.1.4874.2.2.16.1.4.2 | ScalarusdSnmpAuthFailIdUdpPort | accessible-for-notify | current | The source UDP port contained in a received SNMP request that failed authentication. |
| 1.3.6.1.4.1.4874.2.2.16.1.4.3 | ScalarusdSnmpAuthFailIdCommunity | accessible-for-notify | current | The SNMP community contained in a received SNMP request that failed authentication. |
| 1.3.6.1.4.1.4874.2.2.16.1.4.4 | ScalarusdSnmpAuthFailIdReason | accessible-for-notify | current | The reason a received SNMP request failed authentication: other Unspecified reason. badCommunityName The community is not recognized. badCommunityUse The commu… |
| 1.3.6.1.4.1.4874.2.2.16.2 | NodeusdSnmpConformance | |||
| 1.3.6.1.4.1.4874.2.2.16.2.1 | NodeusdSnmpCompliances | |||
| 1.3.6.1.4.1.4874.2.2.16.2.1.1 | ComplianceusdSnmpCompliance | obsolete | Obsolete compliance statement for entities which implement the Unisphere SNMP MIB. This statement became obsolete when View support and Named Access List suppo… | |
| 1.3.6.1.4.1.4874.2.2.16.2.1.2 | ComplianceusdSnmpCompliance2 | obsolete | Obsolete compliance statement for entities which implement the Unisphere SNMP MIB. This statement became obsolete when usdSnmpInterfaceMode was added. | |
| 1.3.6.1.4.1.4874.2.2.16.2.1.3 | ComplianceusdSnmpCompliance3 | obsolete | Obsolete compliance statement for entities which implement the Unisphere SNMP MIB. This statement became obsolete when support for interface compress, trap sev… | |
| 1.3.6.1.4.1.4874.2.2.16.2.1.4 | ComplianceusdSnmpCompliance4 | obsolete | The compliance statement for entities which implement the Unisphere SNMP MIB. This statement became obsolete when support for SNMP proxy enable/disable was add… | |
| 1.3.6.1.4.1.4874.2.2.16.2.1.5 | ComplianceusdSnmpCompliance5 | current | The compliance statement for entities which implement the Unisphere SNMP MIB. | |
| 1.3.6.1.4.1.4874.2.2.16.2.2 | NodeusdSnmpGroups | |||
| 1.3.6.1.4.1.4874.2.2.16.2.2.1 | GroupusdSnmpGroup | obsolete | Obsolete collection of management objects pertaining to SNMP Agent capability in a Unisphere product. This group became obsolete when View support and Named Ac… | |
| 1.3.6.1.4.1.4874.2.2.16.2.2.2 | GroupusdSnmpAuthFailGroup | current | A collection of management objects pertaining to an SNMP authentication failure in a Unisphere product. | |
| 1.3.6.1.4.1.4874.2.2.16.2.2.3 | GroupusdSnmpGroup2 | obsolete | Obsolete collection of management objects pertaining to SNMP Agent capability in a Unisphere product. This group became obsolete when usdSnmpInterfaceMode was … | |
| 1.3.6.1.4.1.4874.2.2.16.2.2.4 | GroupusdSnmpGroup3 | obsolete | Obsolete collection of management objects pertaining to SNMP Agent capability in a Unisphere product. This group became obsolete when support for interface com… | |
| 1.3.6.1.4.1.4874.2.2.16.2.2.5 | GroupusdSnmpGeneralGroup | obsolete | Obsolete collection of management objects pertaining to general SNMP Agent capabilities in a Unisphere product. This group became obsolete when proxey enable/d… | |
| 1.3.6.1.4.1.4874.2.2.16.2.2.6 | GroupusdSnmpAccessGroup | current | A collection of management objects pertaining to SNMP Agent access capabilities in a Unisphere product. | |
| 1.3.6.1.4.1.4874.2.2.16.2.2.7 | GroupusdSnmpTrapGroup | current | A collection of management objects pertaining to SNMP Agent trap capabilities in a Unisphere product. | |
| 1.3.6.1.4.1.4874.2.2.16.2.2.8 | GroupusdSnmpGeneralGroup2 | current | A collection of management objects pertaining to general SNMP Agent capabilities in a Unisphere product. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| UsdSnmpAccessListName | OCTET STRING (SIZE(0..31)) | current | An IP Access List name. Represents textual information taken from the NVT ASCII character set. The character repertoire of the string is restricted to printable, non-whitespace characters. |
| UsdSnmpCommunityName | OCTET STRING (SIZE(1..31)) | current | An SNMP community name. Represents textual information taken from the NVT ASCII character set. The character repertoire of the string is restricted to printable, non-whitespace characters. |
| UsdSnmpIntfCompRestrictedMask | OCTET STRING (SIZE(4)) | current | This octet string is interpreted as a bit mask, in which each bit corresponds to an interface restriction. The DESCRIPTION clause of a MIB object having this SYNTAX should specify the semantics of bit values '1' and '0'… |
| UsdSnmpTrapMask | OCTET STRING (SIZE(4)) | current | This octet string is interpreted as a bit mask, in which each bit corresponds to a category of SNMP trap. Bit definitions are as follows, where bit 31 is the most significant bit of the first octet, and bit 0 is the lea… |
| UsdTrapSeverity | INTEGER { trapEmergency(0), trapAlert(1), trapCritical(2), trapError(3), trapWarning(4), trapNotice(5), trapInformational(6), trapDebug(7) } | current | The set of trap severity values: |