VERILINK-ENTERPRISE-NCMDS3-MIB
199 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.321.1.3036.9000 | TablencmhdmDs3PortTable | not-accessible | mandatory | The HDM DS3 Port table. |
| 1.3.6.1.4.1.321.1.3036.9000.1 | RowncmhdmDs3PortEntry | not-accessible | mandatory | An entry in the dsu information table. |
| 1.3.6.1.4.1.321.1.3036.9000.1.1 | ColumnncmhdmDs3PortNIDIndex | read-only | mandatory | This variable indicates the node id value of the node. |
| 1.3.6.1.4.1.321.1.3036.9000.1.2 | ColumnncmhdmDs3PortIndex | read-only | mandatory | The index value which uniquely identifies the DS1 interface to which this entry is applica- ble. The interface identified by a particular value of this index i… |
| 1.3.6.1.4.1.321.1.3036.9000.1.3 | ColumnncmhdmDs3PerfControl | read-write | mandatory | Performance Control Enabled/Disabled. |
| 1.3.6.1.4.1.321.1.3036.9000.1.4 | ColumnncmhdmDs3LBOSelection | read-write | mandatory | Select the length of DS3 cable to be Normal (0-255 feet) or Long cable (225-450 feet). |
| 1.3.6.1.4.1.321.1.3036.9000.1.5 | ColumnncmhdmDs3DataRateMode | read-write | mandatory | Data Rate Mode. |
| 1.3.6.1.4.1.321.1.3036.9000.1.6 | ColumnncmhdmDs3Rate | read-write | mandatory | the date rate fro ds3 . |
| 1.3.6.1.4.1.321.1.3036.9000.1.7 | ColumnncmhdmDs3LineType | read-write | mandatory | Line Type. |
| 1.3.6.1.4.1.321.1.3036.9000.1.8 | ColumnncmhdmDs3LineCode | read-write | mandatory | Line Code. |
| 1.3.6.1.4.1.321.1.3036.9000.1.9 | ColumnncmhdmDs3AISCBit | read-write | mandatory | AISCBit. |
| 1.3.6.1.4.1.321.1.3036.9000.1.10 | ColumnncmhdmDs3EquipCode | read-write | mandatory | This is the Far End Equipment Identification code that describes the specific piece of equipment. It is sent within the Path Identification Message. |
| 1.3.6.1.4.1.321.1.3036.9000.1.11 | ColumnncmhdmDs3LocationIDCode | read-write | mandatory | This is the Far End Location Identification code that describes the specific location of the equipment. It is sent within the Path Identification Message. |
| 1.3.6.1.4.1.321.1.3036.9000.1.12 | ColumnncmhdmDs3FrameIDCode | read-write | mandatory | This is the Far End Frame Identification code that identifies where the equipment is located within a building at a given location. It is sent within the Path … |
| 1.3.6.1.4.1.321.1.3036.9000.1.13 | ColumnncmhdmDs3UnitCode | read-write | mandatory | This is the Far End code that identifies the equipment location within a bay. It is sent within the Path Identification Message. |
| 1.3.6.1.4.1.321.1.3036.9000.1.14 | ColumnncmhdmDs3FacilityIDCode | read-write | mandatory | This code identifies a specific Far End DS3 path. It is sent within the Path Identification Message. |
| 1.3.6.1.4.1.321.1.3036.9000.1.15 | ColumnncmhdmDs3PortIdCode | read-write | mandatory | Port ID. |
| 1.3.6.1.4.1.321.1.3036.9000.1.16 | ColumnncmhdmDs3CircuitID | read-write | mandatory | Circuit ID. |
| 1.3.6.1.4.1.321.1.3036.9000.1.17 | ColumnncmhdmDs3GenIDCode | read-write | mandatory | Test Signal Generator ID. |
| 1.3.6.1.4.1.321.1.3036.9000.1.18 | ColumnncmhdmDs3Inband | read-write | mandatory | Inband signalling control. |
| 1.3.6.1.4.1.321.1.3036.9001 | TablencmhdmHssi1PortTable | not-accessible | mandatory | The HDM HSSI Port table. |
| 1.3.6.1.4.1.321.1.3036.9001.1 | RowncmhdmHssi1PortEntry | not-accessible | mandatory | An entry in the dsu information table. |
| 1.3.6.1.4.1.321.1.3036.9001.1.1 | ColumnncmhdmDs3Hssi1NIDIndex | read-only | mandatory | This variable indicates the node id value of the node. |
| 1.3.6.1.4.1.321.1.3036.9001.1.2 | ColumnncmhdmHssi1PortIndex | read-only | mandatory | The index value which uniquely identifies the DS1 interface to which this entry is applica- ble. The interface identified by a particular value of this index i… |
| 1.3.6.1.4.1.321.1.3036.9001.1.3 | ColumnncmhdmHssi1ConfigMode | read-write | mandatory | Set the Hssi Port to be automatic configuration or manual configuration. |
| 1.3.6.1.4.1.321.1.3036.9001.1.4 | ColumnncmhdmHssi1PortConfig | read-write | mandatory | Configure System - In-Service or Out of Service. |
| 1.3.6.1.4.1.321.1.3036.9001.1.5 | ColumnncmhdmHssi1TestMode | read-only | mandatory | Report status of the test mode of HSSI port. |
| 1.3.6.1.4.1.321.1.3036.9001.1.6 | ColumnncmhdmHssi1DataRateMode | read-write | mandatory | Data Rate Mode for the Hssi Ports . |
| 1.3.6.1.4.1.321.1.3036.9001.1.7 | ColumnncmhdmHssi1HssiRate | read-write | mandatory | Data Rate in # of T1. |
| 1.3.6.1.4.1.321.1.3036.9001.1.8 | ColumnncmhdmHssi1CircuitID | read-write | mandatory | This is the Circuit ID for the Hssi port. |
| 1.3.6.1.4.1.321.1.3036.9002 | TablencmhdmHssiStatTable | not-accessible | mandatory | The HDM HSSI Stats. |
| 1.3.6.1.4.1.321.1.3036.9002.1 | RowncmhdmHssiStatEntry | not-accessible | mandatory | An entry in the Hssi ds3 stats table. |
| 1.3.6.1.4.1.321.1.3036.9002.1.1 | ColumnncmhdmHssiStatNIDIndex | read-only | mandatory | This variable indicates the node id value of the node. |
| 1.3.6.1.4.1.321.1.3036.9002.1.2 | ColumnncmhdmHssiStatIndex | read-only | mandatory | The index value which uniquely identifies the DS1 interface to which this entry is applica- ble. The interface identified by a particular value of this index i… |
| 1.3.6.1.4.1.321.1.3036.9002.1.3 | ColumnncmhdmStatDCEReady | read-only | mandatory | Hssi Port DCE Ready OFF/ON. |
| 1.3.6.1.4.1.321.1.3036.9002.1.4 | ColumnncmhdmStatDTEReady | read-only | mandatory | Hssi Port DTE Ready OFF/ON. |
| 1.3.6.1.4.1.321.1.3036.9002.1.5 | ColumnncmhdmStatLpbkA | read-only | mandatory | Hssi Port - Loopback A OFF/ON. |
| 1.3.6.1.4.1.321.1.3036.9002.1.6 | ColumnncmhdmStatLpbkB | read-only | mandatory | Hssi Port - Loopback B OFF/ON. |
| 1.3.6.1.4.1.321.1.3036.9002.1.7 | ColumnncmhdmStatTestMode | read-only | mandatory | Hssi Port Test Mode OFF/ON. |
| 1.3.6.1.4.1.321.1.3036.9002.1.8 | ColumnncmhdmStatPortState | read-only | mandatory | Hssi Port - In-Service or Out of Service. |
| 1.3.6.1.4.1.321.1.3036.9002.1.9 | ColumnncmhdmStatCIMType | read-only | mandatory | Ds3 Cim Type. |
| 1.3.6.1.4.1.321.1.3036.9002.1.10 | ColumnncmhdmStatDiagStatus | read-only | mandatory | Hssi User Equipment Loopback OFF/ON. |
| 1.3.6.1.4.1.321.1.3036.9003 | TablencmhdmCurrentTable | not-accessible | mandatory | The DS3/E3 Current table. |
| 1.3.6.1.4.1.321.1.3036.9003.1 | RowncmhdmCurrentEntry | not-accessible | mandatory | An entry in the DS3/E3 Current table. |
| 1.3.6.1.4.1.321.1.3036.9003.1.1 | ColumnncmhdmCurrentNIDIndex | read-only | mandatory | This variable indicates the node id value of the node. |
| 1.3.6.1.4.1.321.1.3036.9003.1.2 | ColumnncmhdmCurrentIndex | read-only | mandatory | The index value which uniquely identifies the DS3/E3 interface to which this entry is applicable. The interface identified by a particular value of this index … |
| 1.3.6.1.4.1.321.1.3036.9003.1.3 | ColumnncmhdmCurrentCRC4Status | read-only | mandatory | Current CRC4 Status. |
| 1.3.6.1.4.1.321.1.3036.9003.1.4 | ColumnncmhdmCurrentTimeStampSecs | read-only | mandatory | Current Time in seconds. |
| 1.3.6.1.4.1.321.1.3036.9003.1.5 | ColumnncmhdmCurrentTimeStampMSecs | read-only | mandatory | Current Time in milliseconds. |
| 1.3.6.1.4.1.321.1.3036.9003.1.6 | ColumnncmhdmCurrentSecsElaps | read-only | mandatory | Seconds elapsed in the current interval. |
| 1.3.6.1.4.1.321.1.3036.9003.1.7 | ColumnncmhdmCurrentFarEndCCV | read-only | mandatory | The counter associated with the number of Far End C-bit Code Violations, in the current 15 minute interval. |
| 1.3.6.1.4.1.321.1.3036.9003.1.8 | ColumnncmhdmCurrentFarEndCES | read-only | mandatory | The counter associated with the number of Far End C-bit Errored Seconds, in the current 15 minute interval. |
| 1.3.6.1.4.1.321.1.3036.9003.1.9 | ColumnncmhdmCurrentFarEndCSES | read-only | mandatory | The counter associated with the number of Far End C-bit Severely Errored Seconds, in the current 15 minute interval. |
| 1.3.6.1.4.1.321.1.3036.9003.1.10 | ColumnncmhdmCurrentFarEndLUAS | read-only | mandatory | Far End Line Unavailable Seconds. The counter associated with the number of Seconds the Far End DS3 interface was Out Of Service in the current 15 minute inter… |
| 1.3.6.1.4.1.321.1.3036.9003.1.11 | ColumnncmhdmCurrentLCV | read-only | mandatory | The counter associated with the number of Line Code Violations, a bipolar or excesive zero violation, in the current 15 minute interval. |
| 1.3.6.1.4.1.321.1.3036.9003.1.12 | ColumnncmhdmCurrentLES | read-only | mandatory | Line Errored Second Total. The counter associated with the number of Seconds of in which one or more LCV occurred in the current 15 minute interval. |
| 1.3.6.1.4.1.321.1.3036.9003.1.13 | ColumnncmhdmCurrentLSESs | read-only | mandatory | The counter associated with the number of Line Severely Errored Seconds (LSES) in the current 15 minute interval. |
| 1.3.6.1.4.1.321.1.3036.9003.1.14 | ColumnncmhdmCurrentPCV | read-only | mandatory | The counter associated with the number of Parity Code Violations (locally calculated P-bits disagree with those received), in the current 15 minute interval. |
| 1.3.6.1.4.1.321.1.3036.9003.1.15 | ColumnncmhdmCurrentPES | read-only | mandatory | The counter associated with the number of Seconds having at least one Parity Code Violation, in the current 15 minute interval. |
| 1.3.6.1.4.1.321.1.3036.9003.1.16 | ColumnncmhdmCurrentPSES | read-only | mandatory | The counter associated with the number of Seconds having 44 or more Parity Code Violations, in the current 15 minute interval. |
| 1.3.6.1.4.1.321.1.3036.9003.1.17 | ColumnncmhdmCurrentCCV | read-only | mandatory | The counter associated with the number of C-bit Code Violations, in the current 15 minute interval. |
| 1.3.6.1.4.1.321.1.3036.9003.1.18 | ColumnncmhdmCurrentCES | read-only | mandatory | The counter associated with the number of C-bit Errored Seconds, in the current 15 minute interval. |
| 1.3.6.1.4.1.321.1.3036.9003.1.19 | ColumnncmhdmCurrentCSES | read-only | mandatory | The counter associated with the number of C-bit Severely Errored Seconds, in the current 15 minute interval. |
| 1.3.6.1.4.1.321.1.3036.9003.1.20 | ColumnncmhdmCurrentSEFS | read-only | mandatory | The counter associated with the number of seconds in which one or more Out of Frame occurred in the current 15 minute interval. |
| 1.3.6.1.4.1.321.1.3036.9003.1.21 | ColumnncmhdmCurrentAISS | read-only | mandatory | The counter associated with the number of Seconds in which one or more incoming AIS was detected in the current 15 minute interval. |
| 1.3.6.1.4.1.321.1.3036.9003.1.22 | ColumnncmhdmCurrentOOSSs | read-only | mandatory | The counter associated with the number of Seconds the DS3 interface was Out Of Service in the current 15 minute interval. |
| 1.3.6.1.4.1.321.1.3036.9003.1.23 | ColumnncmhdmCurrentLOSSs | read-only | mandatory | The counter associated with the number of Seconds Of system Loss Of Signal (LOS) in the current 15 minute interval. |
| 1.3.6.1.4.1.321.1.3036.9003.1.24 | ColumnncmhdmCurrentLOFSs | read-only | mandatory | The counter associated with the number of Seconds Of system Loss Of Frame (LOF) in the current 15 minute interval. |
| 1.3.6.1.4.1.321.1.3036.9004 | TablencmhdmIntervalTable | not-accessible | mandatory | The DS3/E3 Interval table. |
| 1.3.6.1.4.1.321.1.3036.9004.1 | RowncmhdmIntervalEntry | not-accessible | mandatory | An entry in the DS3/E3 Interval table. |
| 1.3.6.1.4.1.321.1.3036.9004.1.1 | ColumnncmhdmIntervalNIDIndex | read-only | mandatory | This variable indicates the node id value of the node. |
| 1.3.6.1.4.1.321.1.3036.9004.1.2 | ColumnncmhdmIntervalIndex | read-only | mandatory | The index value which uniquely identifies the DS3/E3 interface to which this entry is applicable. The interface identified by a particular value of this index … |
| 1.3.6.1.4.1.321.1.3036.9004.1.3 | ColumnncmhdmIntervalNumber | read-only | mandatory | A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes inter- val (assuming tha… |
| 1.3.6.1.4.1.321.1.3036.9004.1.4 | ColumnncmhdmIntervalFarEndCCV | read-only | mandatory | The counter associated with the number of Far End C-bit Code Violations, in the previous 15 minute interval. |
| 1.3.6.1.4.1.321.1.3036.9004.1.5 | ColumnncmhdmIntervalFarEndCES | read-only | mandatory | The counter associated with the number of Far End C-bit Errored Seconds, in the current 15 minute interval. |
| 1.3.6.1.4.1.321.1.3036.9004.1.6 | ColumnncmhdmIntervalFarEndCSES | read-only | mandatory | The counter associated with the number of Far End C-bit Severely Errored Seconds, in the current 15 minute interval. |
| 1.3.6.1.4.1.321.1.3036.9004.1.7 | ColumnncmhdmIntervalFarEndLUAS | read-only | mandatory | Far End Line Unavailable Seconds. The counter associated with the number of Seconds the Far End DS3 interface was Out Of Service in the current 15 minute inter… |
| 1.3.6.1.4.1.321.1.3036.9004.1.8 | ColumnncmhdmIntervalLCV | read-only | mandatory | The counter associated with the number of Line Code Violations, a bipolar or excesive zero violation, in the current 15 minute interval. |
| 1.3.6.1.4.1.321.1.3036.9004.1.9 | ColumnncmhdmIntervalLES | read-only | mandatory | Line Errored Second Total. The counter associated with the number of Seconds of in which one or more LCV occurred in the current 15 minute interval. |
| 1.3.6.1.4.1.321.1.3036.9004.1.10 | ColumnncmhdmIntervalLSESs | read-only | mandatory | The counter associated with the number of Line Severely Errored Seconds (LSES) in the current 15 minute interval. |
| 1.3.6.1.4.1.321.1.3036.9004.1.11 | ColumnncmhdmIntervalPCV | read-only | mandatory | The counter associated with the number of Parity Code Violations (locally calculated P-bits disagree with those received), in the current 15 minute interval. |
| 1.3.6.1.4.1.321.1.3036.9004.1.12 | ColumnncmhdmIntervalPES | read-only | mandatory | The counter associated with the number of Seconds having at least one Parity Code Violation, in the current 15 minute interval. |
| 1.3.6.1.4.1.321.1.3036.9004.1.13 | ColumnncmhdmIntervalPSES | read-only | mandatory | The counter associated with the number of Seconds having 44 or more Parity Code Violations, in the current 15 minute interval. |
| 1.3.6.1.4.1.321.1.3036.9004.1.14 | ColumnncmhdmIntervalCCV | read-only | mandatory | The counter associated with the number of C-bit Code Violations, in the current 15 minute interval. |
| 1.3.6.1.4.1.321.1.3036.9004.1.15 | ColumnncmhdmIntervalCES | read-only | mandatory | The counter associated with the number of C-bit Errored Seconds, in the current 15 minute interval. |
| 1.3.6.1.4.1.321.1.3036.9004.1.16 | ColumnncmhdmIntervalCSES | read-only | mandatory | The counter associated with the number of C-bit Severely Errored Seconds, in the current 15 minute interval. |
| 1.3.6.1.4.1.321.1.3036.9004.1.17 | ColumnncmhdmIntervalSEFS | read-only | mandatory | The counter associated with the number of seconds in which one or more Out of Frame occurred in the current 15 minute interval. |
| 1.3.6.1.4.1.321.1.3036.9004.1.18 | ColumnncmhdmIntervalAISS | read-only | mandatory | The counter associated with the number of Seconds in which one or more incoming AIS was detected in the current 15 minute interval. |
| 1.3.6.1.4.1.321.1.3036.9004.1.19 | ColumnncmhdmIntervalOOSSs | read-only | mandatory | The counter associated with the number of Seconds the DS3 interface was Out Of Service in the current 15 minute interval. |
| 1.3.6.1.4.1.321.1.3036.9004.1.20 | ColumnncmhdmIntervalLOSSs | read-only | mandatory | The counter associated with the number of Seconds Of system Loss Of Signal (LOS) in the current 15 minute interval. |
| 1.3.6.1.4.1.321.1.3036.9004.1.21 | ColumnncmhdmIntervalLOFSs | read-only | mandatory | The counter associated with the number of Seconds Of system Loss Of Frame (LOF) in the current 15 minute interval. |
| 1.3.6.1.4.1.321.1.3036.9005 | TablencmhdmTotalTable | not-accessible | mandatory | The DS3/E3 Total table. |
| 1.3.6.1.4.1.321.1.3036.9005.1 | RowncmhdmTotalEntry | not-accessible | mandatory | An entry in the DS3/E3 Total table. |
| 1.3.6.1.4.1.321.1.3036.9005.1.1 | ColumnncmhdmTotalNIDIndex | read-only | mandatory | This variable indicates the node id value of the node. |
| 1.3.6.1.4.1.321.1.3036.9005.1.2 | ColumnncmhdmTotalIndex | read-only | mandatory | The index value which uniquely identifies the DS3/E3 interface to which this entry is applicable. The interface identified by a particular value of this index … |
| 1.3.6.1.4.1.321.1.3036.9005.1.3 | ColumnncmhdmTotalCRC4Status | read-only | mandatory | CRC4 Status. |
| 1.3.6.1.4.1.321.1.3036.9005.1.4 | ColumnncmhdmTotalValidInterv | read-only | mandatory | The number of valid intervals. |
| 1.3.6.1.4.1.321.1.3036.9005.1.5 | ColumnncmhdmTotalFarEndCCV | read-only | mandatory | The counter associated with the number of Far End C-bit Code Violations, in the last 24 hour interval. |
| 1.3.6.1.4.1.321.1.3036.9005.1.6 | ColumnncmhdmTotalFarEndCES | read-only | mandatory | The counter associated with the number of Far End C-bit Errored Seconds, in the last 24 hour interval. |
| 1.3.6.1.4.1.321.1.3036.9005.1.7 | ColumnncmhdmTotalFarEndCSES | read-only | mandatory | The counter associated with the number of Far End C-bit Severely Errored Seconds, in the last 24 hour interval. |
| 1.3.6.1.4.1.321.1.3036.9005.1.8 | ColumnncmhdmTotalFarEndLUAS | read-only | mandatory | Far End Line Unavailable Seconds. The counter associated with the number of Seconds the Far End DS3 interface was Out Of Service in the last 24 hour interval. |
| 1.3.6.1.4.1.321.1.3036.9005.1.9 | ColumnncmhdmTotalLCV | read-only | mandatory | The counter associated with the number of Line Code Violations, a bipolar or excesive zero violation, in the last 24 hour interval. |
| 1.3.6.1.4.1.321.1.3036.9005.1.10 | ColumnncmhdmTotalLES | read-only | mandatory | Line Errored Second Total. The counter associated with the number of Seconds of in which one or more LCV occurred in the last 24 hour interval. |
| 1.3.6.1.4.1.321.1.3036.9005.1.11 | ColumnncmhdmTotalLSESs | read-only | mandatory | The counter associated with the number of Seconds Of Line Severely Errored Seconds (LSES) in the last 24 hour interval. |
| 1.3.6.1.4.1.321.1.3036.9005.1.12 | ColumnncmhdmTotalPCV | read-only | mandatory | The counter associated with the number of Parity Code Violations (locally calculated P-bits disagree with those received), in the last 24 hour interval. |
| 1.3.6.1.4.1.321.1.3036.9005.1.13 | ColumnncmhdmTotalPES | read-only | mandatory | The counter associated with the number of Seconds having at least one Parity Code Violation, in the last 24 hour interval. |
| 1.3.6.1.4.1.321.1.3036.9005.1.14 | ColumnncmhdmTotalPSES | read-only | mandatory | The counter associated with the number of Seconds having 44 or more Parity Code Violations, in the last 24 hour interval. |
| 1.3.6.1.4.1.321.1.3036.9005.1.15 | ColumnncmhdmTotalCCV | read-only | mandatory | The counter associated with the number of C-bit Code Violations, in the last 24 hour interval. |
| 1.3.6.1.4.1.321.1.3036.9005.1.16 | ColumnncmhdmTotalCES | read-only | mandatory | The counter associated with the number of C-bit Errored Seconds, in the last 24 hour interval. |
| 1.3.6.1.4.1.321.1.3036.9005.1.17 | ColumnncmhdmTotalCSES | read-only | mandatory | The counter associated with the number of C-bit Severely Errored Seconds, in the last 24 hour interval. |
| 1.3.6.1.4.1.321.1.3036.9005.1.18 | ColumnncmhdmTotalSEFS | read-only | mandatory | The counter associated with the number of seconds in which one or more Out of Frame occurred in the last 24 hour interval. |
| 1.3.6.1.4.1.321.1.3036.9005.1.19 | ColumnncmhdmTotalAISS | read-only | mandatory | The counter associated with the number of Seconds in which one or more incoming AIS was detected in the last 24 hour interval. |
| 1.3.6.1.4.1.321.1.3036.9005.1.20 | ColumnncmhdmTotalOOSSs | read-only | mandatory | The counter associated with the number of Seconds the DS3 interface was Out Of Service in the last 24 hour interval. |
| 1.3.6.1.4.1.321.1.3036.9005.1.21 | ColumnncmhdmTotalLOSSs | read-only | mandatory | The counter associated with the number of Seconds Of system Loss Of Signal (LOS) in the last 24 hour interval. |
| 1.3.6.1.4.1.321.1.3036.9005.1.22 | ColumnncmhdmTotalLOFSs | read-only | mandatory | The counter associated with the number of Seconds Of system Loss Of Frame (LOF) in the last 24 hour interval. |
| 1.3.6.1.4.1.321.1.3036.9006 | TablencmDs3PerformanceSnapShotTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.321.1.3036.9006.1 | RowncmDs3PerformanceSnapShotEntry | not-accessible | mandatory | An entry in the Ds3 Performance Snap Shot Entry table. |
| 1.3.6.1.4.1.321.1.3036.9006.1.1 | ColumnncmDs3SnapShotNIDIndex | read-only | mandatory | The object specifies the node id index of the node. |
| 1.3.6.1.4.1.321.1.3036.9006.1.2 | ColumnncmDs3SnapShotIndex | read-only | mandatory | The index value which uniquely identifies the DS1 interface to which this entry is applica- ble. The interface identified by a particular value of this index i… |
| 1.3.6.1.4.1.321.1.3036.9006.1.3 | ColumnncmDs3SnapShotCRC4Status | read-only | mandatory | CRC4 Status. |
| 1.3.6.1.4.1.321.1.3036.9006.1.4 | ColumnncmDs3SnapShot | read-write | mandatory | The variable specifies the option to initiate snap shot command. |
| 1.3.6.1.4.1.321.1.3036.9006.1.5 | ColumnncmDs3TimeStampSec | read-only | mandatory | The variable specifies the Time Stamp in Seconds . |
| 1.3.6.1.4.1.321.1.3036.9006.1.6 | ColumnncmDs3TimeStampMilliSec | read-only | mandatory | The variable specifies the Time Stamp in milli Seconds . |
| 1.3.6.1.4.1.321.1.3036.9006.1.7 | ColumnncmDs3SnapShotSecs | read-only | mandatory | The variable specifies number of seconds in the current interval. |
| 1.3.6.1.4.1.321.1.3036.9006.1.8 | ColumnncmDs3ResetPerfReg | read-write | mandatory | Reset Performance Monitoring registers. |
| 1.3.6.1.4.1.321.1.3036.9007 | TablencmhdmTCAQtrTable | not-accessible | mandatory | The quarter hour Alert Threshold Table. |
| 1.3.6.1.4.1.321.1.3036.9007.1 | RowncmhdmTCAQtrEntry | not-accessible | mandatory | An entry in the DS3/E3 table. |
| 1.3.6.1.4.1.321.1.3036.9007.1.1 | ColumnncmhdmTCAQtrNIDIndex | read-only | mandatory | This variable indicates the node id value of the node. |
| 1.3.6.1.4.1.321.1.3036.9007.1.2 | ColumnncmhdmTCAQtrIndex | read-only | mandatory | The index value which uniquely identifies the alert crossing threshold interface to which this entry is applicable. The interface identified by a particular va… |
| 1.3.6.1.4.1.321.1.3036.9007.1.3 | ColumnncmhdmTCAQtrDs3FarEndCCV | read-write | mandatory | The performance alert threshold for DS3 layer Far End C-bit Code Violation in 1/4 hour boundary. |
| 1.3.6.1.4.1.321.1.3036.9007.1.4 | ColumnncmhdmTCAQtrDs3FarEndCES | read-write | mandatory | The performance alert threshold for DS3 Far End C-bit Errored Seconds, in 1/4 hour boundary. |
| 1.3.6.1.4.1.321.1.3036.9007.1.5 | ColumnncmhdmTCAQtrDs3FarEndCSES | read-write | mandatory | The performance alert threshold for DS3 Far End C-bit Severely Errored Seconds, in 1/4 hour boundary. |
| 1.3.6.1.4.1.321.1.3036.9007.1.6 | ColumnncmhdmTCAQtrDs3FarEndLUAS | read-write | mandatory | The performance alert threshold for DS3 layer Far End Line Unavailable Seconds in 1/4 hour boundary. |
| 1.3.6.1.4.1.321.1.3036.9007.1.7 | ColumnncmhdmTCAQtrDs3LCV | read-write | mandatory | The performance alert threshold for DS3 layer Line code Violation in 1/4 hour boundary. |
| 1.3.6.1.4.1.321.1.3036.9007.1.8 | ColumnncmhdmTCAQtrDs3LES | read-write | mandatory | The performance alert threshold for DS3 layer Line Errored Second in 1/4 hour boundary. |
| 1.3.6.1.4.1.321.1.3036.9007.1.9 | ColumnncmhdmTCAQtrDs3LSESs | read-write | mandatory | The performance alert threshold for DS3 layer Line Severely Errored Second in 1/4 hour boundary. |
| 1.3.6.1.4.1.321.1.3036.9007.1.10 | ColumnncmhdmTCAQtrDs3PCV | read-write | mandatory | The performance alert threshold for DS3 layer Parity Code Violation in 1/4 hour boundary. |
| 1.3.6.1.4.1.321.1.3036.9007.1.11 | ColumnncmhdmTCAQtrDs3PES | read-write | mandatory | The performance alert threshold for DS3 layer Parity Errored Second in 1/4 hour boundary. |
| 1.3.6.1.4.1.321.1.3036.9007.1.12 | ColumnncmhdmTCAQtrDs3PSES | read-write | mandatory | The performance alert threshold for DS3 layer Parity Severely Errored Second in 1/4 hour boundary. |
| 1.3.6.1.4.1.321.1.3036.9007.1.13 | ColumnncmhdmTCAQtrDs3CCV | read-write | mandatory | The performance alert threshold for DS3 layer C-bit Code Violation in 1/4 hour boundary. |
| 1.3.6.1.4.1.321.1.3036.9007.1.14 | ColumnncmhdmTCAQtrDs3CES | read-write | mandatory | The performance alert threshold for DS3 Far End C-bit Errored Seconds, layer Errored Second in 1/4 hour boundary. |
| 1.3.6.1.4.1.321.1.3036.9007.1.15 | ColumnncmhdmTCAQtrDs3CSES | read-write | mandatory | The performance alert threshold for DS3 layer C-bit Severely Errored Second in 1/4 hour boundary. |
| 1.3.6.1.4.1.321.1.3036.9007.1.16 | ColumnncmhdmTCAQtrDs3SEFS | read-write | mandatory | The performance alert threshold for DS3 layer Severely Errored Framing Seconds in 1/4 hour boundary. |
| 1.3.6.1.4.1.321.1.3036.9007.1.17 | ColumnncmhdmTCAQtrDs3AISS | read-write | mandatory | The performance alert threshold for DS3 layer Alarm Indication Signal Second in 1/4 hour boundary. |
| 1.3.6.1.4.1.321.1.3036.9007.1.18 | ColumnncmhdmTCAQtrDs3LUASs | read-write | mandatory | The performance alert threshold for DS3 layer Unavailable Second in 1/4 hour boundary. |
| 1.3.6.1.4.1.321.1.3036.9007.1.19 | ColumnncmhdmTCAQtrDs3LOSSs | read-write | mandatory | The performance alert threshold for DS3 Loss of Signal (LOS) Seconds in 1/4 hour boundary. |
| 1.3.6.1.4.1.321.1.3036.9007.1.20 | ColumnncmhdmTCAQtrDs3LOFSs | read-write | mandatory | The performance alert threshold for DS3 Loss of Frame (LOF) Seconds in 1/4 hour boundary. |
| 1.3.6.1.4.1.321.1.3036.9008 | TablencmhdmTCADayTable | not-accessible | mandatory | The 24 hour Alert Threshold Table. |
| 1.3.6.1.4.1.321.1.3036.9008.1 | RowncmhdmTCADayEntry | not-accessible | mandatory | An entry in the 24 hour Alert Threshold Table. |
| 1.3.6.1.4.1.321.1.3036.9008.1.1 | ColumnncmhdmTCADayNIDIndex | read-only | mandatory | This variable indicates the node id value of the node. |
| 1.3.6.1.4.1.321.1.3036.9008.1.2 | ColumnncmhdmTCADayIndex | read-only | mandatory | The index value which uniquely identifies the alert crossing threshold interface to which this entry is applicable. The interface identified by a particular va… |
| 1.3.6.1.4.1.321.1.3036.9008.1.3 | ColumnncmhdmTCADayDs3FarEndCCV | read-write | mandatory | The performance alert threshold for DS3 layer Far End C-bit Code Violation in 24 hour boundary. |
| 1.3.6.1.4.1.321.1.3036.9008.1.4 | ColumnncmhdmTCADayDs3FarEndCES | read-write | mandatory | The performance alert threshold for DS3 Far End C-bit Errored Seconds, in 24 hour boundary. |
| 1.3.6.1.4.1.321.1.3036.9008.1.5 | ColumnncmhdmTCADayDs3FarEndCSES | read-write | mandatory | The performance alert threshold for DS3 Far End C-bit Severely Errored Seconds, in 24 hour boundary. |
| 1.3.6.1.4.1.321.1.3036.9008.1.6 | ColumnncmhdmTCADayDs3FarEndLUAS | read-write | mandatory | The performance alert threshold for DS3 layer Far End Line Unavailable Seconds in 24 hour boundary. |
| 1.3.6.1.4.1.321.1.3036.9008.1.7 | ColumnncmhdmTCADayDs3LCV | read-write | mandatory | The performance alert threshold for DS3 layer Line code Violation in 24 hour boundary. |
| 1.3.6.1.4.1.321.1.3036.9008.1.8 | ColumnncmhdmTCADayDs3LES | read-write | mandatory | The performance alert threshold for DS3 layer Line Errored Second in 24 hour boundary. |
| 1.3.6.1.4.1.321.1.3036.9008.1.9 | ColumnncmhdmTCADayDs3LSESs | read-write | mandatory | The performance alert threshold for DS3 layer Line Severely Errored Second in 24 hour boundary. |
| 1.3.6.1.4.1.321.1.3036.9008.1.10 | ColumnncmhdmTCADayDs3PCV | read-write | mandatory | The performance alert threshold for DS3 layer Parity Code Violation in 24 hour boundary. |
| 1.3.6.1.4.1.321.1.3036.9008.1.11 | ColumnncmhdmTCADayDs3PES | read-write | mandatory | The performance alert threshold for DS3 layer Parity Errored Second in 24 hour boundary. |
| 1.3.6.1.4.1.321.1.3036.9008.1.12 | ColumnncmhdmTCADayDs3PSES | read-write | mandatory | The performance alert threshold for DS3 layer Parity Severely Errored Second in 24 hour boundary. |
| 1.3.6.1.4.1.321.1.3036.9008.1.13 | ColumnncmhdmTCADayDs3CCV | read-write | mandatory | The performance alert threshold for DS3 layer C-bit Code Violation in 24 hour boundary. |
| 1.3.6.1.4.1.321.1.3036.9008.1.14 | ColumnncmhdmTCADayDs3CES | read-write | mandatory | The performance alert threshold for DS3 C-bit Errored Seconds, in 24 hour boundary. |
| 1.3.6.1.4.1.321.1.3036.9008.1.15 | ColumnncmhdmTCADayDs3CSES | read-write | mandatory | The performance alert threshold for DS3 C-bit Severely Errored Seconds, in 24 hour boundary. |
| 1.3.6.1.4.1.321.1.3036.9008.1.16 | ColumnncmhdmTCADayDs3SEFS | read-write | mandatory | The performance alert threshold for DS3 layer Severely Errored Framing Seconds in 24 hour boundary. |
| 1.3.6.1.4.1.321.1.3036.9008.1.17 | ColumnncmhdmTCADayDs3AISS | read-write | mandatory | The performance alert threshold for DS3 layer Alarm Indication Signal Second in 24 hour boundary. |
| 1.3.6.1.4.1.321.1.3036.9008.1.18 | ColumnncmhdmTCADayDs3LUASs | read-write | mandatory | The performance alert threshold for DS3 layer Unavailable Second in 24 hour boundary. |
| 1.3.6.1.4.1.321.1.3036.9008.1.19 | ColumnncmhdmTCADayDs3LOSSs | read-write | mandatory | The performance alert threshold for DS3 Loss of Signal (LOS) Seconds in 24 hour boundary. |
| 1.3.6.1.4.1.321.1.3036.9008.1.20 | ColumnncmhdmTCADayDs3LOFSs | read-write | mandatory | The performance alert threshold for DS3 Loss of Frame (LOF) Seconds in 24 hour boundary. |
| 1.3.6.1.4.1.321.1.3036.9009 | TablencmhdmTxAlarmTable | not-accessible | mandatory | DS3 Transmit alarm Table. |
| 1.3.6.1.4.1.321.1.3036.9009.1 | RowncmhdmTxAlarmEntry | not-accessible | mandatory | An entry in the DS3/E3 Transmit Alarm table. |
| 1.3.6.1.4.1.321.1.3036.9009.1.1 | ColumnncmhdmTxAlarmNIDIndex | read-only | mandatory | This variable indicates the node id value of the node. |
| 1.3.6.1.4.1.321.1.3036.9009.1.2 | ColumnncmhdmTxAlarmIndex | read-only | mandatory | The index value which uniquely identifies the Transmit Alarm interface to which this entry is applicable. The interface identified by a particular value of thi… |
| 1.3.6.1.4.1.321.1.3036.9009.1.3 | ColumnncmhdmTxYellowAlarm | read-write | mandatory | Transmit the near-end yellow alarm. |
| 1.3.6.1.4.1.321.1.3036.9009.1.4 | ColumnncmhdmTxAIS | read-write | mandatory | Transmit the near-end AIS alarm. |
| 1.3.6.1.4.1.321.1.3036.9009.1.5 | ColumnncmhdmTxIdleSignal | read-write | mandatory | Transmit the near-end Idle alarm. |
| 1.3.6.1.4.1.321.1.3036.9009.1.6 | ColumnncmhdmTxFEBE | read-write | mandatory | Near end unit transmits the FEBE alarm. |
| 1.3.6.1.4.1.321.1.3036.9009.1.7 | ColumnncmhdmTxFEACAlarm | read-write | mandatory | This object describes which, if any, FEAC Alarm is enabled. |
| 1.3.6.1.4.1.321.1.3036.9010 | TablencmhdmDs3StatTable | not-accessible | mandatory | The HDM Ds3 Stats. |
| 1.3.6.1.4.1.321.1.3036.9010.1 | RowncmhdmDs3StatEntry | not-accessible | mandatory | An entry in the ds3 stats table. |
| 1.3.6.1.4.1.321.1.3036.9010.1.1 | ColumnncmhdmDs3StatNIDIndex | read-only | mandatory | This variable indicates the node id value of the node. |
| 1.3.6.1.4.1.321.1.3036.9010.1.2 | ColumnncmhdmDs3StatIndex | read-only | mandatory | The index value which uniquely identifies the DS1 interface to which this entry is applica- ble. The interface identified by a particular value of this index i… |
| 1.3.6.1.4.1.321.1.3036.9010.1.3 | ColumnncmhdmDs3StatAIS | read-only | mandatory | Port Status AIS off/on. |
| 1.3.6.1.4.1.321.1.3036.9010.1.4 | ColumnncmhdmDs3StatIdle | read-only | mandatory | port Status Idle off/on. |
| 1.3.6.1.4.1.321.1.3036.9010.1.5 | ColumnncmhdmDs3StatYellowAlm | read-only | mandatory | Port Status Yellow Alarm off/on. |
| 1.3.6.1.4.1.321.1.3036.9010.1.6 | ColumnncmhdmDs3StatFrameLoss | read-only | mandatory | off/on. |
| 1.3.6.1.4.1.321.1.3036.9010.1.7 | ColumnncmhdmDs3StatSigLoss | read-only | mandatory | Port Status Signal Loss off/on. |
| 1.3.6.1.4.1.321.1.3036.9010.1.8 | ColumnncmhdmDs3StatPLCPYellow | read-only | mandatory | Port Status PLCP Yellow Alarm off/on. |
| 1.3.6.1.4.1.321.1.3036.9010.1.9 | ColumnncmhdmDs3StatPLCPFrmLoss | read-only | mandatory | Port Status PLCP Frame Loss off/on. |
| 1.3.6.1.4.1.321.1.3036.9010.1.10 | ColumnncmhdmDs3StatPLCPOOF | read-only | mandatory | Port Status PLCP Out of Frame off/on. |
| 1.3.6.1.4.1.321.1.3036.9010.1.11 | ColumnncmhdmDs3LpbkLocal | read-only | mandatory | Local Loopback enabled/disabled. |
| 1.3.6.1.4.1.321.1.3036.9010.1.12 | ColumnncmhdmDs3LpbkPayload | read-only | mandatory | Payload Loopback enabled/disabled. |
| 1.3.6.1.4.1.321.1.3036.9010.1.13 | ColumnncmhdmDs3LpbkFEAC | read-only | mandatory | FEAC Loopback enabled/disabled. |
| 1.3.6.1.4.1.321.1.3036.9010.1.14 | ColumnncmhdmDs3LpbkFarEnd | read-only | mandatory | Far end Loopback enabled/disabled. |
| 1.3.6.1.4.1.321.1.3036.9011 | Tablencmhdmds3LPBKTable | not-accessible | mandatory | The DS3/E3 Current table. |
| 1.3.6.1.4.1.321.1.3036.9011.1 | Rowncmhdmds3LPBKEntry | not-accessible | mandatory | An entry in the DS3 Loopback table. |
| 1.3.6.1.4.1.321.1.3036.9011.1.1 | ColumnncmhdmLPBKNIDIndex | read-only | mandatory | This variable indicates the node id value of the node. |
| 1.3.6.1.4.1.321.1.3036.9011.1.2 | Columnncmhdmds3LPBKIndex | read-only | mandatory | The index value which uniquely identifies the DS3/E3 interface to which this entry is applicable. The interface identified by a particular value of this index … |
| 1.3.6.1.4.1.321.1.3036.9011.1.3 | ColumnncmhdmDs3LPBKActivation | read-write | mandatory | Ds3 Loopback enabled/disabled, and Ds3 Loopback Type. |