VERILINK-ENTERPRISE-NCMDSU-MIB
86 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.321.1.3022.2000 | TablencmdsuCommonTable | not-accessible | mandatory | The ncmdsu information table. |
| 1.3.6.1.4.1.321.1.3022.2000.1 | RowncmdsuCommonEntry | not-accessible | mandatory | An entry in the ncmdsu information table. |
| 1.3.6.1.4.1.321.1.3022.2000.1.1 | ColumnncmdsuNIDIndex | read-only | mandatory | |
| 1.3.6.1.4.1.321.1.3022.2000.1.2 | ColumnncmdsuIndex | read-only | mandatory | |
| 1.3.6.1.4.1.321.1.3022.2000.1.3 | ColumnncmdsuPortType | read-only | mandatory | |
| 1.3.6.1.4.1.321.1.3022.2000.1.4 | ColumnncmdsuPortLoopback | read-write | mandatory | |
| 1.3.6.1.4.1.321.1.3022.2000.1.5 | ColumnncmdsuPortTest | read-write | mandatory | |
| 1.3.6.1.4.1.321.1.3022.2001 | TablencmdsuConfigTable | not-accessible | mandatory | The ncmdsu Configuration table. |
| 1.3.6.1.4.1.321.1.3022.2001.1 | RowncmdsuConfigEntry | not-accessible | mandatory | An entry in the ncmdsu Configuration table. |
| 1.3.6.1.4.1.321.1.3022.2001.1.1 | ColumnncmdsuNIDConfigIndex | read-only | mandatory | This variable indicates the node id value of the node. |
| 1.3.6.1.4.1.321.1.3022.2001.1.2 | ColumnncmdsuLineIndex | read-only | mandatory | |
| 1.3.6.1.4.1.321.1.3022.2001.1.3 | Columnncmdsubus | read-write | mandatory | The ncmdsu bus type for Port. |
| 1.3.6.1.4.1.321.1.3022.2001.1.4 | ColumnncmdsuPortChannel | read-write | mandatory | This variable indicates the channel assignment for the ncmdsu for the port. |
| 1.3.6.1.4.1.321.1.3022.2001.1.5 | ColumnncmdsuPortConfiguration | read-write | mandatory | This variable indicates the configuration bits for port. The configuration can be set by setting the relevant bit to 1 and reset by setting the relevant bit to… |
| 1.3.6.1.4.1.321.1.3022.2001.1.6 | Columnncmcsushelf | read-write | mandatory | This variable indicates the csu shelf associated with the ncmdsu port. |
| 1.3.6.1.4.1.321.1.3022.2001.1.7 | Columnncmcsuslot | read-write | mandatory | This variable indicates the csu slot associated with the ncmdsu port. |
| 1.3.6.1.4.1.321.1.3022.2001.1.8 | ColumnncmdsuAlarmEnable | read-write | mandatory | This variable indicates whether the alarm is enabled or disabled for ncmdsu. |
| 1.3.6.1.4.1.321.1.3022.2001.1.9 | ColumnncmdsuLosLead | read-write | mandatory | This variable indicates the DTE lead bits for port. The DTE leads can be set by setting the relevant bit to 1 and reset by setting the relevant bit to zero. Bi… |
| 1.3.6.1.4.1.321.1.3022.2001.1.10 | ColumnncmdsuTimingSource | read-write | mandatory | This variable indicates the T1 timing source for ncmdsu. |
| 1.3.6.1.4.1.321.1.3022.2001.1.11 | ColumnncmdsuDTESpeed | read-write | mandatory | This variable indicates DTE Speed control and speeds 38.4k or below holds good for the DIU2131 card type. |
| 1.3.6.1.4.1.321.1.3022.2003 | TablencmdsustatTable | not-accessible | mandatory | The ncm dsu stat table. |
| 1.3.6.1.4.1.321.1.3022.2003.1 | RowncmdsustatEntry | not-accessible | mandatory | An entry in the ncm dsu stat table. |
| 1.3.6.1.4.1.321.1.3022.2003.1.1 | ColumnncmdsuNIDstatIndex | read-only | mandatory | This object specifies the node id of the node. |
| 1.3.6.1.4.1.321.1.3022.2003.1.2 | ColumnncmdsustatIndex | read-only | mandatory | |
| 1.3.6.1.4.1.321.1.3022.2003.1.3 | ColumnncmdsuPortLowbattery | read-only | mandatory | The ncmdsu Lowbattery status for Port. |
| 1.3.6.1.4.1.321.1.3022.2003.1.4 | ColumnncmdsuPortLOSstatus | read-only | mandatory | The ncmdsu LOS status for Port. |
| 1.3.6.1.4.1.321.1.3022.2003.1.5 | ColumnncmdsuPortblockerrorcounter | read-only | mandatory | The number of block errors produced on port. |
| 1.3.6.1.4.1.321.1.3022.2003.1.6 | ColumnncmdsuPortTestSeconds | read-only | mandatory | The number of errors produced by a test on port. |
| 1.3.6.1.4.1.321.1.3022.2003.1.7 | ColumnncmdsuPortrateper8000 | read-only | mandatory | The rate/8000 on port. |
| 1.3.6.1.4.1.321.1.3022.2003.1.8 | ColumnncmdsuPortLeadStatus1 | read-only | mandatory | This variable indicates the Lead Status (part 1) of the port. The various bit positions are: Bit Value Name 0 1 DTR (1 = on; 0 = off) 1 2 RTS 2 4 DSR 3 8 CTS 4… |
| 1.3.6.1.4.1.321.1.3022.2003.1.9 | ColumnncmdsuPortLeadStatus2 | read-only | mandatory | This variable indicates the Lead Status (part 2) of the port.The lead status2 is bit mapped. The various bit positions are: BIT Value Name 0 0 no-loop 0 1 loca… |
| 1.3.6.1.4.1.321.1.3022.2003.1.10 | ColumnncmdbuPrimaryLineStatus | read-only | mandatory | This variable indicates the Primary Line Status of the ncmdbu. |
| 1.3.6.1.4.1.321.1.3022.2003.1.11 | ColumnncmdbuLineStatus | read-only | mandatory | This variable indicates the ncmdbu Line Status of the ncmdbu. |
| 1.3.6.1.4.1.321.1.3022.2003.1.12 | ColumnncmdbuSwitchBy | read-only | mandatory | This variable indicates the cause of the ncmdbu switching. |
| 1.3.6.1.4.1.321.1.3022.2003.1.13 | ColumnncmdbuReceivedCode | read-only | mandatory | This variable indicates the ncmdbu received code in hex. |
| 1.3.6.1.4.1.321.1.3022.2003.1.14 | ColumnncmdsuPortTestResults | read-only | mandatory | The number of errors produced by a test on port . |
| 1.3.6.1.4.1.321.1.3022.2003.1.15 | ColumnncmdsuPortDiagStatus | read-only | mandatory | This variable indicates the Diagnostic Status of the port. The various bit positions are: Bit Value Name 0 1 Reserved 1 2 Reserved 2 4 Reserved 3 8 Sending Tes… |
| 1.3.6.1.4.1.321.1.3023.4000 | TablencmdbuMainConfigTable | not-accessible | mandatory | The ncm dbu Main Configuration table. |
| 1.3.6.1.4.1.321.1.3023.4000.1 | RowncmdbuMainConfigEntry | not-accessible | mandatory | An entry in the ncm dbu Main Configuration table. |
| 1.3.6.1.4.1.321.1.3023.4000.1.1 | ColumnncmdbuNIDMainConfigIndex | read-only | mandatory | This variable indicates the node id value of the node. |
| 1.3.6.1.4.1.321.1.3023.4000.1.2 | ColumnncmdbuMainLineIndex | read-only | mandatory | |
| 1.3.6.1.4.1.321.1.3023.4000.1.3 | Columnncmdbudsubus | read-write | mandatory | The ncmdsu bus type for Port. |
| 1.3.6.1.4.1.321.1.3023.4000.1.4 | ColumnncmdbuPortChannel | read-write | mandatory | This variable indicates the channel assignment for the ncmdbu for the port. |
| 1.3.6.1.4.1.321.1.3023.4000.1.5 | ColumnncmdbuPortConfiguration | read-write | mandatory | This variable indicates the configuration bits for port. The configuration can be set by setting the relevant bit to 1 and reset by setting the relevant bit to… |
| 1.3.6.1.4.1.321.1.3023.4000.1.6 | Columnncmdbucsushelf | read-write | mandatory | This variable indicates the csu shelf associated with the ncmdbu port. |
| 1.3.6.1.4.1.321.1.3023.4000.1.7 | Columnncmdbucsuslot | read-write | mandatory | This variable indicates the csu slot associated with the ncmdbu port. |
| 1.3.6.1.4.1.321.1.3023.4000.1.8 | ColumnncmdbuLosLead | read-write | mandatory | This variable indicates the DTE lead bits for port. The DTE leads can be set by setting the relevant bit to 1 and reset by setting the relevant bit to zero. Bi… |
| 1.3.6.1.4.1.321.1.3023.4001 | TablencmdbuConfigTable | not-accessible | mandatory | The ncm dbu Configuration table. |
| 1.3.6.1.4.1.321.1.3023.4001.1 | RowncmdbuConfigEntry | not-accessible | mandatory | An entry in the ncmdbu Configuration table. |
| 1.3.6.1.4.1.321.1.3023.4001.1.1 | ColumnncmdbuNIDConfigIndex | read-only | mandatory | This variable specifies the node id. |
| 1.3.6.1.4.1.321.1.3023.4001.1.2 | ColumnncmdbuLineIndex | read-only | mandatory | |
| 1.3.6.1.4.1.321.1.3023.4001.1.3 | ColumnncmdbuAllOnesSwitchOverTime | read-write | mandatory | This variable indicates the all ones duration in seconds for the ncmdbu. |
| 1.3.6.1.4.1.321.1.3023.4001.1.4 | ColumnncmdbuSwitchOnBERThresholdExceeded | read-write | mandatory | This variable indicates whether the ncmdbu is switched on for BER Threshold exceeded. |
| 1.3.6.1.4.1.321.1.3023.4001.1.5 | ColumnncmdbuDialBackupMode | read-write | mandatory | This variable indicates the dial backup mode for the ncmdbu. |
| 1.3.6.1.4.1.321.1.3023.4001.1.6 | ColumnncmdbuBackupConnection | read-write | mandatory | This variable indicates the whether the backup connection is activated or not. |
| 1.3.6.1.4.1.321.1.3023.4001.1.7 | Columnncmdbumode | read-write | mandatory | This variable specifies the mode of ncmdbu. |
| 1.3.6.1.4.1.321.1.3023.4001.1.8 | ColumnncmdbuLoopType | read-write | mandatory | This variable specifies the Loop Type on RL EIA . |
| 1.3.6.1.4.1.321.1.3024.5000 | TablencmddsMainConfigTable | not-accessible | mandatory | The ncmdds Main Configuration table. |
| 1.3.6.1.4.1.321.1.3024.5000.1 | RowncmddsMainConfigEntry | not-accessible | mandatory | An entry in the ncmdds Main Configuration table. |
| 1.3.6.1.4.1.321.1.3024.5000.1.1 | ColumnncmddsNIDMainConfigIndex | read-only | mandatory | This variable indicates the node id value of the node. |
| 1.3.6.1.4.1.321.1.3024.5000.1.2 | ColumnncmddsMainLineIndex | read-only | mandatory | |
| 1.3.6.1.4.1.321.1.3024.5000.1.3 | Columnncmddsdsubus | read-write | mandatory | The ncmdsu bus type for Port. |
| 1.3.6.1.4.1.321.1.3024.5000.1.4 | ColumnncmddsPortChannel | read-write | mandatory | This variable indicates the channel assignment for the ncmdsu for the port. |
| 1.3.6.1.4.1.321.1.3024.5000.1.5 | ColumnncmddsPortConfiguration | read-write | mandatory | This variable indicates the configuration bits for port. The configuration can be set by setting the relevant bit to 1 and reset by setting the relevant bit to… |
| 1.3.6.1.4.1.321.1.3024.5000.1.6 | Columnncmddscsushelf | read-write | mandatory | This variable indicates the csu shelf associated with the ncmdsu port. |
| 1.3.6.1.4.1.321.1.3024.5000.1.7 | Columnncmddscsuslot | read-write | mandatory | This variable indicates the csu slot associated with the ncmdsu port. |
| 1.3.6.1.4.1.321.1.3024.5000.1.8 | ColumnncmddsLosLead | read-write | mandatory | This variable indicates the DTE lead bits for port. The DTE leads can be set by setting the relevant bit to 1 and reset by setting the relevant bit to zero. Bi… |
| 1.3.6.1.4.1.321.1.3024.5001 | TablencmddsConfigTable | not-accessible | mandatory | The ncmdds Configuration table. |
| 1.3.6.1.4.1.321.1.3024.5001.1 | RowncmddsConfigEntry | not-accessible | mandatory | An entry in the ncmdds Configuration table. |
| 1.3.6.1.4.1.321.1.3024.5001.1.1 | ColumnncmddsNIDConfigIndex | read-only | mandatory | This variable specifies the node id. |
| 1.3.6.1.4.1.321.1.3024.5001.1.2 | ColumnncmddsConfigLineIndex | read-only | mandatory | This variable specifies the Line index. |
| 1.3.6.1.4.1.321.1.3024.5001.1.3 | ColumnncmddsPortLoopEnable | read-write | mandatory | This variable indicates the loop enable bits for port. The loop enable can be set by setting the relevant bit to 1 and reset by setting the relevant bit to zer… |
| 1.3.6.1.4.1.321.1.3024.5001.1.4 | ColumnncmddsPortReceiveLoopCode | read-write | mandatory | This variable indicates the Receive ncmdds loop code of the port 1. |
| 1.3.6.1.4.1.321.1.3024.5001.1.5 | ColumnncmddsPortRemoteLoopCode | read-write | mandatory | This variable indicates the Receive ncmdds loop code of the port. |
| 1.3.6.1.4.1.321.1.3024.5001.1.6 | ColumnncmddsPortAlarmEnable | read-write | mandatory | This variable indicates the Alarm enable which is bit mapped of the port. BIT Value Description 0 0 no-loop 0 1 alarm-on-loop 1 2 alarm-on-test 3 both |
| 1.3.6.1.4.1.321.1.3024.5001.1.7 | ColumnncmddsPortAlarmClearDelayTime | read-write | mandatory | This variable indicates the Alarmcleardelaytime of the port. |
| 1.3.6.1.4.1.321.1.3024.5001.1.8 | ColumnncmddsPortAbnormalStationCodeThreshold | read-write | mandatory | This variable indicates the AbnormalStationCodethreshold of the port. |
| 1.3.6.1.4.1.321.1.3024.5001.1.9 | ColumnncmddsPortControlModeIdleThreshold | read-write | mandatory | This variable indicates the ControlModeIdlethreshold of the port. |
| 1.3.6.1.4.1.321.1.3024.5001.1.10 | ColumnncmddsPortMuxOutofSyncThreshold | read-write | mandatory | This variable indicates the MuxoutofSyncthreshold of the port. |
| 1.3.6.1.4.1.321.1.3024.5001.1.11 | ColumnncmddsPortUnAssignedMuxChannelThreshold | read-write | mandatory | This variable indicates the UnassignedMuxChannelthreshold of the port. |
| 1.3.6.1.4.1.321.1.3024.5001.1.12 | ColumnncmddsPortGroup1Codes | read-write | mandatory | This variable indicates the port1Group1ncmddsCodes of the port. |
| 1.3.6.1.4.1.321.1.3024.5001.1.13 | ColumnncmddsPort56KStatus | read-only | mandatory | This variable indicates the 56K ncmdds Status of the port. The various bit positions are: 0 Abnormal Station code(1 = Yes, 0 = No) 1 Control Mode Idle 2 Mux-Ou… |
| 1.3.6.1.4.1.321.1.3024.5001.1.14 | ColumnncmddsPortReceived56KCode | read-only | mandatory | This variable specifies the received 56K ncmdds code.Some specitic values indicate the specific testing error. Value Testing Error 1 UMC 2 TIP 3 TA 4 MA 5 RC 6… |
| 1.3.6.1.4.1.321.1.3024.5001.1.15 | Columnncmddsmode | read-write | mandatory | This variable specifies the mode of ncmdds. |
| 1.3.6.1.4.1.321.1.3024.5001.1.16 | ColumnncmddsLatchingLoopbackType | read-write | mandatory | This variable specifies the latching loop up type of dds. |
| 1.3.6.1.4.1.321.1.3024.5001.1.17 | ColumnncmddsLatchingLoopbackDevNo | read-write | mandatory | This variable specifies the device number to receive code. Range is 0 to 7, where 0 is the first device. Used only for DS0-Data Port loopback option of Latchin… |