VERILINK-ENTERPRISE-NCMGENERIC-MIB
764 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.321.1.3012.1001 | TablencmNodeCurrTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.321.1.3012.1001.1 | RowncmNodeCurrEntry | not-accessible | mandatory | An entry in the ncmNode Current table for selecting the active node in operation. |
| 1.3.6.1.4.1.321.1.3012.1001.1.1 | ColumnncmNodeCurrIndex | read-only | mandatory | This variable indicates the node id value inside the array containing all called nodes. |
| 1.3.6.1.4.1.321.1.3012.1001.1.2 | ColumnncmNodeCurrAddress | read-only | mandatory | This variable indicates the ncmNode Current Address. |
| 1.3.6.1.4.1.321.1.3012.1001.1.3 | ColumnncmActiveNodeStatus | read-write | mandatory | This variable indicates what is the current node of the network that is being managed; when this object is set, another node table will be activated and treat … |
| 1.3.6.1.4.1.321.1.3012.1002 | TablencmNodeInfoTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.321.1.3012.1002.1 | RowncmNodeInfoEntry | not-accessible | mandatory | An entry in the ncmNode Info table. |
| 1.3.6.1.4.1.321.1.3012.1002.1.1 | ColumnncmNodeIndex | read-only | mandatory | This variable indicates the node id value of the node. |
| 1.3.6.1.4.1.321.1.3012.1002.1.2 | ColumnncmNodeAddress | read-only | mandatory | This variable indicates the ncmNode Address. |
| 1.3.6.1.4.1.321.1.3012.1002.1.3 | ColumnncmTime | read-write | mandatory | The time (in the hh:mm:sec) format for the card. |
| 1.3.6.1.4.1.321.1.3012.1002.1.4 | ColumnncmDate | read-write | mandatory | The date (in mm:dd:yy) format for the card. |
| 1.3.6.1.4.1.321.1.3012.1002.1.5 | ColumnncmNodeShelf | read-only | mandatory | The variable indicates the bit mapping of shelf number associated with the node the bit 1 if equipped and 0 if not equipped. i.e. ncmShelf 0 = bit 0 |
| 1.3.6.1.4.1.321.1.3012.1002.1.6 | ColumnncmNodeID | read-only | mandatory | The variable indicates the node id that uniquely identifies a node. |
| 1.3.6.1.4.1.321.1.3012.1002.1.7 | ColumnncmControllerEqID | read-only | mandatory | The variable indicates the Equipment Id of the Controller. |
| 1.3.6.1.4.1.321.1.3012.1003 | TablencmShelfInfoTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.321.1.3012.1003.1 | RowncmShelfInfoEntry | not-accessible | mandatory | An entry in the ncmShelf Info table. |
| 1.3.6.1.4.1.321.1.3012.1003.1.1 | ColumnncmShelfNIDIndex | read-only | mandatory | This variable indicates the node id value of the node. |
| 1.3.6.1.4.1.321.1.3012.1003.1.2 | ColumnncmShelfIndex | read-only | mandatory | This object is the identifier of an Interface on a managed device. If there is an ifEntry that is directly associated with this and only this DS1 interface, it… |
| 1.3.6.1.4.1.321.1.3012.1003.1.3 | ColumnncmShelfNumber | read-only | mandatory | This variable indicates the number of the shelf. |
| 1.3.6.1.4.1.321.1.3012.1003.1.4 | ColumnncmShelfHardware | read-only | mandatory | This variable indicates the shelf hardware type. |
| 1.3.6.1.4.1.321.1.3012.1003.1.5 | ColumnncmNumberofCards | read-only | mandatory | This variable indicates the total number of cards in the shelf. |
| 1.3.6.1.4.1.321.1.3012.1003.1.6 | ColumnncmListCardsInShelf | read-only | mandatory | This variable indicates the cards present in the shelf. For Example 1,3,5 if the cards 1,3 and 5 are present. |
| 1.3.6.1.4.1.321.1.3012.1004 | TablencmCardInfoTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.321.1.3012.1004.1 | RowncmCardInfoEntry | not-accessible | mandatory | An entry in the ncmCard Info table. |
| 1.3.6.1.4.1.321.1.3012.1004.1.1 | ColumnncmCardNIDIndex | read-only | mandatory | This variable indicates the node id value of the node. |
| 1.3.6.1.4.1.321.1.3012.1004.1.2 | ColumnncmCardIndex | read-only | mandatory | This object is the identifier of an Interface on a managed device. If there is an ifEntry that is directly associated with this and only this DS1 interface, it… |
| 1.3.6.1.4.1.321.1.3012.1004.1.3 | ColumnncmFirmwareType | read-only | mandatory | This variable indicates the firmware type for cards. |
| 1.3.6.1.4.1.321.1.3012.1004.1.4 | ColumnncmCimType | read-only | mandatory | This variable indicates the cim type for the cards. |
| 1.3.6.1.4.1.321.1.3012.1004.1.5 | ColumnncmClearCardInfo | read-write | mandatory | This variable indicates the option to clear the ncmCard Configuration in EEProm. |
| 1.3.6.1.4.1.321.1.3012.1005 | TablencmShelfSyncSourceTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.321.1.3012.1005.1 | RowncmShelfSyncSourceEntry | not-accessible | mandatory | An entry in the ncm Shelf Sync Source Time table. |
| 1.3.6.1.4.1.321.1.3012.1005.1.1 | ColumnncmShelfSyncNIDIndex | read-only | mandatory | This variable indicates the node id value of the node. |
| 1.3.6.1.4.1.321.1.3012.1005.1.2 | ColumnncmShelfSyncSourceIndex | read-only | mandatory | This object is the identifier of an Interface on a managed device. If there is an ifEntry that is directly associated with this and only this DS1 interface, it… |
| 1.3.6.1.4.1.321.1.3012.1005.1.3 | ColumnncmSourceOneShelfNum | read-write | mandatory | This variable indicates the source one shelf number. |
| 1.3.6.1.4.1.321.1.3012.1005.1.4 | ColumnncmSourceOneCardNum | read-write | mandatory | This variable indicates the source one card number. |
| 1.3.6.1.4.1.321.1.3012.1005.1.5 | ColumnncmSourceOneClockRef | read-write | mandatory | This variable indicates the source one clock reference. |
| 1.3.6.1.4.1.321.1.3012.1005.1.6 | ColumnncmAutoRestore1 | read-write | mandatory | This variable indicates the source one auto restore. |
| 1.3.6.1.4.1.321.1.3012.1005.1.7 | ColumnncmSourceTwoShelfNum | read-write | mandatory | This variable indicates the source two shelf number. |
| 1.3.6.1.4.1.321.1.3012.1005.1.8 | ColumnncmSourceTwoCardNum | read-write | mandatory | This variable indicates the source two card number. |
| 1.3.6.1.4.1.321.1.3012.1005.1.9 | ColumnncmSourceTwoClockRef | read-write | mandatory | This variable indicates the source two clock reference. |
| 1.3.6.1.4.1.321.1.3012.1005.1.10 | ColumnncmAutoRestore2 | read-write | mandatory | This variable indicates the source two auto restore. |
| 1.3.6.1.4.1.321.1.3012.1005.1.11 | ColumnncmSourceThreeShelfNum | read-write | mandatory | This variable indicates the source three shelf number. |
| 1.3.6.1.4.1.321.1.3012.1005.1.12 | ColumnncmSourceThreeCardNum | read-write | mandatory | This variable indicates the source three card number. |
| 1.3.6.1.4.1.321.1.3012.1005.1.13 | ColumnncmSourceThreeClockRef | read-write | mandatory | This variable indicates the source three clock reference. |
| 1.3.6.1.4.1.321.1.3012.1005.1.14 | ColumnncmAutoRestore3 | read-write | mandatory | This variable indicates the source three auto restore. |
| 1.3.6.1.4.1.321.1.3012.1005.1.15 | ColumnncmShelfCurrentSyncSource | read-write | mandatory | This variable indicates the current sync source. |
| 1.3.6.1.4.1.321.1.3012.1006 | TablencmCardSyncSourceTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.321.1.3012.1006.1 | RowncmCardSyncSourceEntry | not-accessible | mandatory | An entry in the ncmCard Sync ncmSource Time table. |
| 1.3.6.1.4.1.321.1.3012.1006.1.1 | ColumnncmCardSyncNIDIndex | read-only | mandatory | This variable indicates the node id value of the node. |
| 1.3.6.1.4.1.321.1.3012.1006.1.2 | ColumnncmCardSyncSourceIndex | read-only | mandatory | This object is the identifier of an Interface on a managed device. If there is an ifEntry that is directly associated with this and only this DS1 interface, it… |
| 1.3.6.1.4.1.321.1.3012.1006.1.3 | ColumnncmCardReceiveClockFromShelf | read-write | mandatory | This variable indicates receive sync clock from the shelf for the card . |
| 1.3.6.1.4.1.321.1.3012.1006.1.4 | ColumnncmCardSourceOneShelfNum | read-write | mandatory | This variable indicates the source one shelf number. |
| 1.3.6.1.4.1.321.1.3012.1006.1.5 | ColumnncmCardSourceOneCardNum | read-write | mandatory | This variable indicates the source one card number. |
| 1.3.6.1.4.1.321.1.3012.1006.1.6 | ColumnncmCardSourceOneClockRef | read-write | mandatory | This variable indicates the source one clock reference. |
| 1.3.6.1.4.1.321.1.3012.1006.1.7 | ColumnncmCardAutoRestore1 | read-write | mandatory | This variable indicates the source one auto restore. |
| 1.3.6.1.4.1.321.1.3012.1006.1.8 | ColumnncmCardSourceTwoShelfNum | read-write | mandatory | This variable indicates the source two shelf number. |
| 1.3.6.1.4.1.321.1.3012.1006.1.9 | ColumnncmCardSourceTwoCardNum | read-write | mandatory | This variable indicates the source two card number. |
| 1.3.6.1.4.1.321.1.3012.1006.1.10 | ColumnncmCardSourceTwoClockRef | read-write | mandatory | This variable indicates the source two clock reference. |
| 1.3.6.1.4.1.321.1.3012.1006.1.11 | ColumnncmCardAutoRestore2 | read-write | mandatory | This variable indicates the source two auto restore. |
| 1.3.6.1.4.1.321.1.3012.1006.1.12 | ColumnncmCardSourceThreeShelfNum | read-write | mandatory | This variable indicates the source three shelf number. |
| 1.3.6.1.4.1.321.1.3012.1006.1.13 | ColumnncmCardSourceThreeCardNum | read-write | mandatory | This variable indicates the source three card number. |
| 1.3.6.1.4.1.321.1.3012.1006.1.14 | ColumnncmCardSourceThreeClockRef | read-write | mandatory | This variable indicates the source three clock reference. |
| 1.3.6.1.4.1.321.1.3012.1006.1.15 | ColumnncmCardAutoRestore3 | read-write | mandatory | This variable indicates the source three auto restore. |
| 1.3.6.1.4.1.321.1.3012.1006.1.16 | ColumnncmCardCurrentSyncSource | read-write | mandatory | This variable indicates the current sync ncm source. |
| 1.3.6.1.4.1.321.1.3012.1007 | TablencmIDPromTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.321.1.3012.1007.1 | RowncmIDPromEntry | not-accessible | mandatory | An entry in the ncm ID Prom Table. |
| 1.3.6.1.4.1.321.1.3012.1007.1.1 | ColumnncmIDPromNIDIndex | read-only | mandatory | This variable indicates the node id value of the node. |
| 1.3.6.1.4.1.321.1.3012.1007.1.2 | ColumnncmIDPromIndex | read-only | mandatory | This object is the identifier of an Interface on a managed device. If there is an ifEntry that is directly associated with this and only this DS1 interface, it… |
| 1.3.6.1.4.1.321.1.3012.1007.1.3 | ColumnncmCardType | read-only | mandatory | This variable indicates the ncmCard type of the card. |
| 1.3.6.1.4.1.321.1.3012.1007.1.4 | ColumnncmCardRevision | read-only | mandatory | This variable indicates the revision number for the card. |
| 1.3.6.1.4.1.321.1.3012.1007.1.5 | ColumnncmCardDate | read-only | mandatory | This variable indicates the date (mm-dd-yy) for the card. |
| 1.3.6.1.4.1.321.1.3012.1007.1.6 | ColumnncmCardSerialNumber | read-only | mandatory | This variable indicates the Serial Number for the card. |
| 1.3.6.1.4.1.321.1.3012.1007.1.7 | ColumnncmManufacturePartNumber | read-only | mandatory | This variable indicates the Manufacture Part Number for the card. |
| 1.3.6.1.4.1.321.1.3012.1007.1.8 | ColumnncmVendorCageCode | read-only | mandatory | This variable indicates the Vendor Cage Code for the card. |
| 1.3.6.1.4.1.321.1.3012.1007.1.9 | ColumnncmIDCimType | read-only | mandatory | This variable indicates the cim Type for the card. |
| 1.3.6.1.4.1.321.1.3012.1007.1.10 | ColumnncmCimRevision | read-only | mandatory | This variable indicates the revision number for the cim of the card. |
| 1.3.6.1.4.1.321.1.3012.1007.1.11 | ColumnncmCimDate | read-only | mandatory | This variable indicates the date (mm-dd-yy) of the cim for the card. |
| 1.3.6.1.4.1.321.1.3012.1007.1.12 | ColumnncmCimSerialNumber | read-only | mandatory | This variable indicates the Serial Number for the card. |
| 1.3.6.1.4.1.321.1.3012.1007.1.13 | ColumnncmCimManufacturePartNumber | read-only | mandatory | This variable indicates the Manufacture Part Number for the card. |
| 1.3.6.1.4.1.321.1.3012.1007.1.14 | ColumnncmCimVendorCageCode | read-only | mandatory | This variable indicates the Vendor Cage Code for the card. |
| 1.3.6.1.4.1.321.1.3012.1008 | TablencmE1PortConfigTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.321.1.3012.1008.1 | RowncmE1PortConfigEntry | not-accessible | mandatory | An entry in the E1 Port Configuration table. |
| 1.3.6.1.4.1.321.1.3012.1008.1.1 | ColumnncmE1ConfigNIDIndex | read-only | mandatory | This object is the identifier of the node id index. |
| 1.3.6.1.4.1.321.1.3012.1008.1.2 | ColumnncmE1PortLineIndex | read-only | mandatory | The index value which uniquely identifies the interface to which this entry is applicable. |
| 1.3.6.1.4.1.321.1.3012.1008.1.3 | ColumnncmE1PortCRC4 | read-write | mandatory | This variable indicates whether the CRC4 for the port is Enabled or Disabled. |
| 1.3.6.1.4.1.321.1.3012.1008.1.4 | ColumnncmE1PortCarrierFailureAlarm | read-write | mandatory | This variable indicates whether the Carrier Failure ncmAlarm is Enabled or Disabled. |
| 1.3.6.1.4.1.321.1.3012.1008.1.5 | ColumnncmE1PortFaseAlarm | read-write | mandatory | This variable indicates whether the Fase ncmAlarm is Major or Minor Category. |
| 1.3.6.1.4.1.321.1.3012.1008.1.6 | ColumnncmE1PortInbandISDNEnableDisable | read-write | mandatory | This variable indicates the Inband, ISDN enable and disable options. |
| 1.3.6.1.4.1.321.1.3012.1008.1.7 | ColumnncmE1PortRepeaterLoopbackTimeoutEnable | read-write | mandatory | This variable indicates the option to enable the repeater loopback timeout. |
| 1.3.6.1.4.1.321.1.3012.1008.1.8 | ColumnncmE1PortFraming | read-write | mandatory | This variable indicates the framing for E1 Port. |
| 1.3.6.1.4.1.321.1.3012.1008.1.9 | ColumnncmE1PortRepeaterLoopbackTimeout | read-write | mandatory | This variable indicates the repeater loopback timeout in seconds for the card. |
| 1.3.6.1.4.1.321.1.3012.1008.1.10 | ColumnncmE1PortCarrierFailureAlarmDeclareTime | read-write | mandatory | This variable indicates the carrier failure alarm declare time in seconds for the card. |
| 1.3.6.1.4.1.321.1.3012.1008.1.11 | ColumnncmE1PortServiceState | read-write | mandatory | This variable indicates service state of the port. |
| 1.3.6.1.4.1.321.1.3012.1008.1.12 | ColumnncmE1PortIdlePattern | read-write | mandatory | This variable indicates the idle pattern for the card. |
| 1.3.6.1.4.1.321.1.3012.1008.1.13 | ColumnncmE1TimeSlot | read-only | mandatory | This variable indicates the Time slot used for the given port directly from the hardware cross point switch for example slot 1-10, if slots 1 to 10 is used or … |
| 1.3.6.1.4.1.321.1.3012.1008.1.14 | ColumnncmE1TimeSlotSelect | read-write | mandatory | This variable indicates the number which is choosed for the inband/isdn timeslot. |
| 1.3.6.1.4.1.321.1.3012.1009 | TablencmE1PortStatusTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.321.1.3012.1009.1 | RowncmE1PortStatusEntry | not-accessible | mandatory | An entry in the E1 Port Status Table. |
| 1.3.6.1.4.1.321.1.3012.1009.1.1 | ColumnncmE1PortStatusNIDIndex | read-only | mandatory | This object identifies the node id index. |
| 1.3.6.1.4.1.321.1.3012.1009.1.2 | ColumnncmE1PortStatusIndex | read-only | mandatory | The index value which uniquely identifies the interface to which this entry is applicable. |
| 1.3.6.1.4.1.321.1.3012.1009.1.3 | ColumnncmE1PortCRC4Error | read-only | mandatory | This variable indicates the occurance of CRC4 error. |
| 1.3.6.1.4.1.321.1.3012.1009.1.4 | ColumnncmE1PortFramingSlip | read-only | mandatory | This variable indicates the occurance of framing slip error. |
| 1.3.6.1.4.1.321.1.3012.1009.1.5 | ColumnncmE1PortRAI | read-only | mandatory | This variable indicates the occurance of RAI. |
| 1.3.6.1.4.1.321.1.3012.1009.1.6 | ColumnncmE1PortLOFA | read-only | mandatory | This variable indicates the occurance of LOFA. |
| 1.3.6.1.4.1.321.1.3012.1009.1.7 | ColumnncmE1PortAIS | read-only | mandatory | This variable indicates the occurance of AIS. |
| 1.3.6.1.4.1.321.1.3012.1009.1.8 | ColumnncmE1PortLOS | read-only | mandatory | This variable indicates the occurance of LOS. |
| 1.3.6.1.4.1.321.1.3012.1009.1.9 | ColumnncmE1PortBPVThresholdExceeded | read-only | mandatory | This variable indicates whether BPV threshold is exceeded or not. |
| 1.3.6.1.4.1.321.1.3012.1009.1.10 | ColumnncmE1BlockErrorCounter | read-only | mandatory | This variable indicates the Block Error Counter. |
| 1.3.6.1.4.1.321.1.3012.1009.1.11 | ColumnncmE1CodeViolationMode | read-only | mandatory | This variable indicates whether HDB3 or FEBE should be counted. |
| 1.3.6.1.4.1.321.1.3012.1009.1.12 | ColumnncmE1CurrentHDB3ORFEBEErrorCounts | read-only | mandatory | This variable indicates the Current HDB3/FEBE error counts. |
| 1.3.6.1.4.1.321.1.3012.1009.1.13 | ColumnncmE1CurrentFrameErrorCounts | read-only | mandatory | This variable indicates the current Frame Error counts. |
| 1.3.6.1.4.1.321.1.3012.1009.1.14 | ColumnncmE1CurrentCRC4ErrorCounts | read-only | mandatory | This variable indicates the current crc4 Error counts. |
| 1.3.6.1.4.1.321.1.3012.1009.1.15 | ColumnncmE1ResetPerfCount | read-write | mandatory | Reset E1 Performance Counters. |
| 1.3.6.1.4.1.321.1.3012.1009.1.16 | ColumnncmE1PortSendRAI | read-only | mandatory | This variable indicates whether the E1 Port Send RAI is enable or disable. |
| 1.3.6.1.4.1.321.1.3012.1009.1.17 | ColumnncmE1PortSendAIS | read-only | mandatory | This variable indicates whether the E1 Port Send AIS is enable or disable. |
| 1.3.6.1.4.1.321.1.3012.1009.1.18 | ColumnncmE1PortRFA | read-only | mandatory | This variable indicates whether the E1 Port RFA is on or off. |
| 1.3.6.1.4.1.321.1.3012.1009.1.19 | ColumnncmE1PortBERThresholdExceeded | read-only | mandatory | This variable indicates whether BER threshold is exceeded or not. |
| 1.3.6.1.4.1.321.1.3012.1009.1.20 | ColumnncmE1PortLLB | read-only | mandatory | This variable indicates whether LLB is on or off. |
| 1.3.6.1.4.1.321.1.3012.1009.1.21 | ColumnncmE1PortPLB | read-only | mandatory | This variable indicates whether PLB is on or off. |
| 1.3.6.1.4.1.321.1.3012.1009.1.22 | ColumnncmE1PortLOC | read-only | mandatory | This variable indicates whether LOC is on or off. |
| 1.3.6.1.4.1.321.1.3012.1009.1.23 | ColumnncmE1PortTestPattern | read-only | mandatory | This variable indicates the test patern in progress: 1 = none 2 = 3/24 3 = QRSS 4 = 2n20-1 5 = 1 in 8 6 = 2N15 - 1 7 = All Zeros 8 = 55 Octets 9 = all ones |
| 1.3.6.1.4.1.321.1.3012.1010 | TablencmE1CurrentTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.321.1.3012.1010.1 | RowncmE1CurrentEntry | not-accessible | mandatory | An entry in the ncm E1 Current table. |
| 1.3.6.1.4.1.321.1.3012.1010.1.1 | ColumnncmE1CurrentNIDIndex | read-only | mandatory | This object identifies the node id of the node. |
| 1.3.6.1.4.1.321.1.3012.1010.1.2 | ColumnncmE1CurrentIndex | read-only | mandatory | The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the … |
| 1.3.6.1.4.1.321.1.3012.1010.1.3 | ColumnncmE1CurrentEndType | read-only | mandatory | The variable specifies the End Type. |
| 1.3.6.1.4.1.321.1.3012.1010.1.4 | ColumnncmE1CRC4Status | read-only | mandatory | The variable specifies the CRC4 Status. |
| 1.3.6.1.4.1.321.1.3012.1010.1.5 | ColumnncmE1Timestamp | read-only | mandatory | The variable specifies the timestamp in seconds. |
| 1.3.6.1.4.1.321.1.3012.1010.1.6 | ColumnncmE1Timestamp1 | read-only | mandatory | The variable specifies the timestamp in milliseconds. |
| 1.3.6.1.4.1.321.1.3012.1010.1.7 | ColumnncmE1CurrentIntervalSec | read-only | mandatory | The variable specifies the current interval in seconds. |
| 1.3.6.1.4.1.321.1.3012.1010.1.8 | ColumnncmE1CurrentASs | read-only | mandatory | The number of Availabe Seconds, encountered by a DS1 interface in the current 15 minute interval. |
| 1.3.6.1.4.1.321.1.3012.1010.1.9 | ColumnncmE1CurrentUASs | read-only | mandatory | The number of Out of Unavailable Seconds encountered by a DS1 interface in the current 15 minute interval. |
| 1.3.6.1.4.1.321.1.3012.1010.1.10 | ColumnncmE1CurrentESs | read-only | mandatory | The number of Errored Seconds encountered by a DS1 interface in the current 15 minute interval. |
| 1.3.6.1.4.1.321.1.3012.1010.1.11 | ColumnncmE1CurrentSESs | read-only | mandatory | The number of Severely Errored Seconds encountered by a DS1 interface in the current 15 minute interval. |
| 1.3.6.1.4.1.321.1.3012.1010.1.12 | ColumnncmE1CurrentFAE | read-only | mandatory | The number of Frame Alignment Error in Seconds encountered by a DS1 interface in the current 15 minute interval. |
| 1.3.6.1.4.1.321.1.3012.1010.1.13 | ColumnncmE1CurrentBBE | read-only | mandatory | The number of Background Block Error encountered by a DS1 interface in the current 15 minute interval. |
| 1.3.6.1.4.1.321.1.3012.1010.1.14 | ColumnncmE1CurrentSEFSs | read-only | mandatory | The number of Severly Error Framing seconds encountered by a DS1 interface in the current 15 minute interval. |
| 1.3.6.1.4.1.321.1.3012.1010.1.15 | ColumnncmE1CurrentAISSs | read-only | mandatory | The number of ncmAlarm Indication Signal seconds encountered by a DS1 interface in the current 15 minute interval. |
| 1.3.6.1.4.1.321.1.3012.1010.1.16 | ColumnncmE1CurrentLOSSs | read-only | mandatory | The number of Loss of Signal seconds encountered by a DS1 interface in the current 15 minute interval. |
| 1.3.6.1.4.1.321.1.3012.1010.1.17 | ColumnncmE1CurrentLOFSs | read-only | mandatory | The number of Loss of Signal seconds encountered by a DS1 interface in the current 15 minute interval. |
| 1.3.6.1.4.1.321.1.3012.1010.1.18 | ColumnncmE1CurrentOOFSs | read-only | mandatory | The number of Out Of Frame seconds encountered by a DS1 interface in the current 15 minute interval. |
| 1.3.6.1.4.1.321.1.3012.1010.1.19 | ColumnncmE1CurrentCVPath | read-only | mandatory | The number of Code Violation Path encountered by a DS1 interface in the current 15 minute interval. |
| 1.3.6.1.4.1.321.1.3012.1010.1.20 | ColumnncmE1CurrentCVLine | read-only | mandatory | The number of Code Violation Line encountered by a DS1 interface in the current 15 minute interval. |
| 1.3.6.1.4.1.321.1.3012.1010.1.21 | ColumnncmE1CurrentESsLine | read-only | mandatory | The number of Errored Seconds Line encountered by a DS1 interface in the current 15 minute interval. |
| 1.3.6.1.4.1.321.1.3012.1010.1.22 | ColumnncmE1CurrentSESsLine | read-only | mandatory | The number of Severely Errored Seconds Line encountered by a DS1 interface in the current 15 minute interval. |
| 1.3.6.1.4.1.321.1.3012.1010.1.23 | ColumnncmE1CurrentFECPath | read-only | mandatory | The number of Failure Event Count Path encountered by a DS1 interface in the current 15 minute interval. |
| 1.3.6.1.4.1.321.1.3012.1010.1.24 | ColumnncmE1CurrentFECLine | read-only | mandatory | The number of Failure Event Count Line encountered by a DS1 interface in the current 15 minute interval. |
| 1.3.6.1.4.1.321.1.3012.1011 | TablencmE1IntervalTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.321.1.3012.1011.1 | RowncmE1IntervalEntry | not-accessible | mandatory | An entry in the E1 Interval table. |
| 1.3.6.1.4.1.321.1.3012.1011.1.1 | ColumnncmE1IntervalNIDIndex | read-only | mandatory | The object specifies the node id index. |
| 1.3.6.1.4.1.321.1.3012.1011.1.2 | ColumnncmE1IntervalIndex | read-only | mandatory | The index value which uniquely identifies the DS1 interface to which this entry is applicable. The interface identified by a particular value of this index is … |
| 1.3.6.1.4.1.321.1.3012.1011.1.3 | ColumnncmE1IntervalEndType | read-only | mandatory | The variable specifies the End Type. |
| 1.3.6.1.4.1.321.1.3012.1011.1.4 | ColumnncmE1IntervalNumber | read-only | mandatory | A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval (assuming that … |
| 1.3.6.1.4.1.321.1.3012.1011.1.5 | ColumnncmE1IntervalASs | read-only | mandatory | The number of Available Seconds encountered by a DS1 interface in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.321.1.3012.1011.1.6 | ColumnncmE1IntervalUASs | read-only | mandatory | The number of Unavailable Seconds encountered by a DS1 interface in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.321.1.3012.1011.1.7 | ColumnncmE1IntervalESs | read-only | mandatory | The number of Error Seconds encountered by a DS1 interface in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.321.1.3012.1011.1.8 | ColumnncmE1IntervalSESs | read-only | mandatory | The number of Severe Error Seconds encountered by a DS1 interface in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.321.1.3012.1011.1.9 | ColumnncmE1IntervalFAE | read-only | mandatory | The number of Frame Alignment Errors encoun- tered by a DS1 interface in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.321.1.3012.1011.1.10 | ColumnncmE1IntervalBBE | read-only | mandatory | The number of Background Block Errors encoun- tered by a DS1 interface in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.321.1.3012.1011.1.11 | ColumnncmE1IntervalSEFSs | read-only | mandatory | The number of Severly Error Framing seconds encountered by a DS1 interface in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.321.1.3012.1011.1.12 | ColumnncmE1IntervalAISSs | read-only | mandatory | The number of ncmAlarm Indication Signal seconds encountered by a DS1 interface in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.321.1.3012.1011.1.13 | ColumnncmE1IntervalLOSSs | read-only | mandatory | The number of Loss of Signal seconds encountered by a DS1 interface in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.321.1.3012.1011.1.14 | ColumnncmE1IntervalLOFSs | read-only | mandatory | The number of Loss of Signal seconds encountered by a DS1 interface in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.321.1.3012.1011.1.15 | ColumnncmE1IntervalOOFSs | read-only | mandatory | The number of Out Of Frame seconds encountered by a DS1 interface in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.321.1.3012.1011.1.16 | ColumnncmE1IntervalCVPath | read-only | mandatory | The number of Code Violation Path encountered by a DS1 interface in one of the previous 96, individual 15 minute, intervals. This object only has significance … |
| 1.3.6.1.4.1.321.1.3012.1011.1.17 | ColumnncmE1IntervalCVLine | read-only | mandatory | The number of Code Violation Line encountered by a DS1 interface in one of the previous 96, individual 15 minute, intervals. This object only has significance … |
| 1.3.6.1.4.1.321.1.3012.1011.1.18 | ColumnncmE1IntervalESsLine | read-only | mandatory | The number of Errored Seconds Line encountered by a DS1 interface in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.321.1.3012.1011.1.19 | ColumnncmE1IntervalSESsLine | read-only | mandatory | The number of Severely Errored Seconds Line encountered by a DS1 interface in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.321.1.3012.1011.1.20 | ColumnncmE1IntervalFECPath | read-only | mandatory | The number of Failure Event Count Path encountered by a DS1 interface in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.321.1.3012.1011.1.21 | ColumnncmE1IntervalFECLine | read-only | mandatory | The number of Failure Event Count Line encountered by a DS1 interface in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.321.1.3012.1012 | TablencmE1TotalTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.321.1.3012.1012.1 | RowncmE1TotalEntry | not-accessible | mandatory | An entry in the Total Entry table. |
| 1.3.6.1.4.1.321.1.3012.1012.1.1 | ColumnncmE1TotalNIDIndex | read-only | mandatory | The object specifies the node id index of the node. |
| 1.3.6.1.4.1.321.1.3012.1012.1.2 | ColumnncmE1TotalIndex | read-only | mandatory | The index value which uniquely identifies the DS1 interface to which this entry is applica- ble. The interface identified by a particular value of this index i… |
| 1.3.6.1.4.1.321.1.3012.1012.1.3 | ColumnncmE1TotalEndType | read-only | mandatory | The variable specifies the End Type. |
| 1.3.6.1.4.1.321.1.3012.1012.1.4 | ColumnncmE1NumberOfValidInterval | read-only | mandatory | The number of previous intervals for which valid data was collected. The value will be 96 unless the interface was brought on-line within the last 24 hours, in… |
| 1.3.6.1.4.1.321.1.3012.1012.1.5 | ColumnncmE1TotalASs | read-only | mandatory | The number of Available Seconds encountered by a DS1 interface in the previous 24 hour interval. |
| 1.3.6.1.4.1.321.1.3012.1012.1.6 | ColumnncmE1TotalUASs | read-only | mandatory | The number of Unavailable Seconds encoun- tered by a DS1 interface in the previous 24 hour interval. |
| 1.3.6.1.4.1.321.1.3012.1012.1.7 | ColumnncmE1TotalESs | read-only | mandatory | The number of Error Seconds encoun- tered by a DS1 interface in the previous 24 hour interval. |
| 1.3.6.1.4.1.321.1.3012.1012.1.8 | ColumnncmE1TotalSESs | read-only | mandatory | The number of Severly Errored Seconds encoun- tered by a DS1 interface in the previous 24 hour interval. |
| 1.3.6.1.4.1.321.1.3012.1012.1.9 | ColumnncmE1TotalFAE | read-only | mandatory | The number of Frame Alignment Signal errors encoun- tered by a DS1 interface in the previous 24 hour interval. |
| 1.3.6.1.4.1.321.1.3012.1012.1.10 | ColumnncmE1TotalBBE | read-only | mandatory | The number of Background Block Errors encoun- tered by a DS1 interface in the previous 24 hour interval. |
| 1.3.6.1.4.1.321.1.3012.1012.1.11 | ColumnncmE1TotalSEFSs | read-only | mandatory | The number of Severly Error Framing seconds encountered by a DS1 interface in 24 hour in- terval. |
| 1.3.6.1.4.1.321.1.3012.1012.1.12 | ColumnncmE1TotalAISSs | read-only | mandatory | The number of ncmAlarm Indication Signal seconds encountered by a DS1 interface in the 24 hour in- terval. |
| 1.3.6.1.4.1.321.1.3012.1012.1.13 | ColumnncmE1TotalLOSSs | read-only | mandatory | The number of Loss of Signal seconds encountered by a DS1 interface in the 24 hour in- terval. |
| 1.3.6.1.4.1.321.1.3012.1012.1.14 | ColumnncmE1TotalLOFSs | read-only | mandatory | The number of Loss of Signal seconds encountered by a DS1 interface in the 24 hour in- terval. |
| 1.3.6.1.4.1.321.1.3012.1012.1.15 | ColumnncmE1TotalOOFSs | read-only | mandatory | The number of Out Of Frame seconds encountered by a DS1 interface in the 24 hour in- terval. |
| 1.3.6.1.4.1.321.1.3012.1012.1.16 | ColumnncmE1TotalCVPath | read-only | mandatory | The number of Code Violation Path encountered by a DS1 interface in the 24 hour in- terval. |
| 1.3.6.1.4.1.321.1.3012.1012.1.17 | ColumnncmE1TotalCVLine | read-only | mandatory | The number of Code Violation Line encountered by a DS1 interface in the 24 hour in- terval. |
| 1.3.6.1.4.1.321.1.3012.1012.1.18 | ColumnncmE1TotalESsLine | read-only | mandatory | The number of Errored Seconds Line encountered by a DS1 interface in the 24 hour in- terval. |
| 1.3.6.1.4.1.321.1.3012.1012.1.19 | ColumnncmE1TotalSESsLine | read-only | mandatory | The number of Severely Errored Seconds Line encountered by a DS1 interface in the 24 hour in- terval. |
| 1.3.6.1.4.1.321.1.3012.1012.1.20 | ColumnncmE1TotalFECPath | read-only | mandatory | The number of Failure Event Count Path encountered by a DS1 interface in the 24 hour in- terval. |
| 1.3.6.1.4.1.321.1.3012.1012.1.21 | ColumnncmE1TotalFECLine | read-only | mandatory | The number of Failure Event Count Line encountered by a DS1 interface in the 24 hour in- terval. |
| 1.3.6.1.4.1.321.1.3012.1013 | TablencmE1PrevTotalTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.321.1.3012.1013.1 | RowncmE1PrevTotalEntry | not-accessible | mandatory | An entry in the Previous day total table. |
| 1.3.6.1.4.1.321.1.3012.1013.1.1 | ColumnncmE1PrevTotalNIDIndex | read-only | mandatory | The object specifies the node id index of the node. |
| 1.3.6.1.4.1.321.1.3012.1013.1.2 | ColumnncmE1PrevTotalIndex | read-only | mandatory | The index value which uniquely identifies the DS1 interface to which this entry is applica- ble. The interface identified by a particular value of this index i… |
| 1.3.6.1.4.1.321.1.3012.1013.1.3 | ColumnncmE1PrevTotalEndType | read-only | mandatory | The variable specifies the End Type . |
| 1.3.6.1.4.1.321.1.3012.1013.1.4 | ColumnncmE1PrevTotalASs | read-only | mandatory | The number of Available Seconds encountered by a DS1 interface in the previous 24 hour interval. |
| 1.3.6.1.4.1.321.1.3012.1013.1.5 | ColumnncmE1PrevTotalUASs | read-only | mandatory | The number of Unavailable Seconds encoun- tered by a DS1 interface in the previous 24 hour interval. |
| 1.3.6.1.4.1.321.1.3012.1013.1.6 | ColumnncmE1PrevTotalESs | read-only | mandatory | The number of Error Seconds encoun- tered by a DS1 interface in the previous 24 hour interval. |
| 1.3.6.1.4.1.321.1.3012.1013.1.7 | ColumnncmE1PrevTotalSESs | read-only | mandatory | The number of Severly Errored Seconds encoun- tered by a DS1 interface in the previous 24 hour interval. |
| 1.3.6.1.4.1.321.1.3012.1013.1.8 | ColumnncmE1PrevTotalFAE | read-only | mandatory | The number of Frame Alignment Signal errors encoun- tered by a DS1 interface in the previous 24 hour interval. |
| 1.3.6.1.4.1.321.1.3012.1013.1.9 | ColumnncmE1PrevTotalBBE | read-only | mandatory | The number of Background Block Errors encoun- tered by a DS1 interface in the previous 24 hour interval. |
| 1.3.6.1.4.1.321.1.3012.1013.1.10 | ColumnncmE1PrevTotalSEFSs | read-only | mandatory | The number of Severly Error Framing seconds encountered by a DS1 interface in the prev 24 hour in- terval. |
| 1.3.6.1.4.1.321.1.3012.1013.1.11 | ColumnncmE1PrevTotalAISSs | read-only | mandatory | The number of ncmAlarm Indication Signal seconds encountered by a DS1 interface in the prev 24 hour in- terval. |
| 1.3.6.1.4.1.321.1.3012.1013.1.12 | ColumnncmE1PrevTotalLOSSs | read-only | mandatory | The number of Loss of Signal seconds encountered by a DS1 interface in the prev 24 hour in- terval. |
| 1.3.6.1.4.1.321.1.3012.1013.1.13 | ColumnncmE1PrevTotalLOFSs | read-only | mandatory | The number of Loss of Signal seconds encountered by a DS1 interface in the prev 24 hour in- terval. |
| 1.3.6.1.4.1.321.1.3012.1013.1.14 | ColumnncmE1PrevTotalOOFSs | read-only | mandatory | The number of Out Of Frame seconds encountered by a DS1 interface in the prev 24 hour in- terval. |
| 1.3.6.1.4.1.321.1.3012.1013.1.15 | ColumnncmE1PrevTotalCVPath | read-only | mandatory | The number of Code Violation Path encountered by a DS1 interface in the prev 24 hour in- terval. |
| 1.3.6.1.4.1.321.1.3012.1013.1.16 | ColumnncmE1PrevTotalCVLine | read-only | mandatory | The number of Code Violation Line encountered by a DS1 interface in the prev 24 hour in- terval. |
| 1.3.6.1.4.1.321.1.3012.1013.1.17 | ColumnncmE1PrevTotalESsLine | read-only | mandatory | The number of Errored Seconds Line encountered by a DS1 interface in the prev 24 hour in- terval. |
| 1.3.6.1.4.1.321.1.3012.1013.1.18 | ColumnncmE1PrevTotalSESsLine | read-only | mandatory | The number of Severely Errored Seconds Line encountered by a DS1 interface in the prev 24 hour in- terval. |
| 1.3.6.1.4.1.321.1.3012.1013.1.19 | ColumnncmE1PrevTotalFECPath | read-only | mandatory | The number of Failure Event Count Path encountered by a DS1 interface in the prev 24 hour in- terval. |
| 1.3.6.1.4.1.321.1.3012.1013.1.20 | ColumnncmE1PrevTotalFECLine | read-only | mandatory | The number of Failure Event Count Line encountered by a DS1 interface in the prev 24 hour in- terval. |
| 1.3.6.1.4.1.321.1.3012.1014 | TablencmE1PerformanceSnapShotTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.321.1.3012.1014.1 | RowncmE1PerformanceSnapShotEntry | not-accessible | mandatory | An entry in the E1 Performance Snap Shot Entry table. |
| 1.3.6.1.4.1.321.1.3012.1014.1.1 | ColumnncmE1SnapShotNIDIndex | read-only | mandatory | The object specifies the node id index of the node. |
| 1.3.6.1.4.1.321.1.3012.1014.1.2 | ColumnncmE1SnapShotIndex | read-only | mandatory | The index value which uniquely identifies the DS1 interface to which this entry is applica- ble. The interface identified by a particular value of this index i… |
| 1.3.6.1.4.1.321.1.3012.1014.1.3 | ColumnncmE1SnapShotEndType | read-only | mandatory | The variable specifies the End Type . |
| 1.3.6.1.4.1.321.1.3012.1014.1.4 | ColumnncmE1SnapShot | read-write | mandatory | The variable specifies the option to intiate snap shot command. |
| 1.3.6.1.4.1.321.1.3012.1014.1.5 | ColumnncmE1TimeStampSec | read-only | mandatory | The variable specifies the Time Stamp in Seconds . |
| 1.3.6.1.4.1.321.1.3012.1014.1.6 | ColumnncmE1TimeMilliSec | read-only | mandatory | The variable specifies the Time Stamp in milli Seconds . |
| 1.3.6.1.4.1.321.1.3012.1014.1.7 | ColumnncmE1SecInCurrInterval | read-only | mandatory | The variable specifies the Seconds in the Current Interval. |
| 1.3.6.1.4.1.321.1.3012.1014.1.8 | ColumnncmE1ResetPerfReg | read-write | mandatory | Reset Performance Monitoring registers. |
| 1.3.6.1.4.1.321.1.3012.1015 | TablencmE1PortLatchedStatusTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.321.1.3012.1015.1 | RowncmE1PortLatchedStatusEntry | not-accessible | mandatory | An entry in the ncm E1 Port Latched Status Table. |
| 1.3.6.1.4.1.321.1.3012.1015.1.1 | ColumnncmE1PortLatchedStatusNIDIndex | read-only | mandatory | The object specifies the node id index of the node. |
| 1.3.6.1.4.1.321.1.3012.1015.1.2 | ColumnncmE1PortLatchedStatusIndex | read-only | mandatory | The index value which uniquely identifies the interface to which this entry is applicable. |
| 1.3.6.1.4.1.321.1.3012.1015.1.3 | ColumnncmE1PortLatchedCRC4Error | read-only | mandatory | This variable indicates the occurance Latched status of CRC4 error. |
| 1.3.6.1.4.1.321.1.3012.1015.1.4 | ColumnncmE1PortLatchedFramingSlip | read-only | mandatory | This variable indicates the occurance Latched status of framing slip error. |
| 1.3.6.1.4.1.321.1.3012.1015.1.5 | ColumnncmE1PortLatchedRAI | read-only | mandatory | This variable indicates the occurance Latched status of RAI. |
| 1.3.6.1.4.1.321.1.3012.1015.1.6 | ColumnncmE1PortLatchedLOFA | read-only | mandatory | This variable indicates the occurance Latched status of LOFA. |
| 1.3.6.1.4.1.321.1.3012.1015.1.7 | ColumnncmE1PortLatchedAIS | read-only | mandatory | This variable indicates the occurance Latched status of AIS. |
| 1.3.6.1.4.1.321.1.3012.1015.1.8 | ColumnncmE1PortLatchedLOS | read-only | mandatory | This variable indicates the occurance Latched Status of LOS. |
| 1.3.6.1.4.1.321.1.3012.1015.1.9 | ColumnncmE1PortLatchedBPVThresholdExceeded | read-only | mandatory | This variable indicates whether BPV threshold is exceeded or not in Latched state. |
| 1.3.6.1.4.1.321.1.3012.1016 | TablencmE1ThresholdStatusTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.321.1.3012.1016.1 | RowncmE1ThresholdStatusEntry | not-accessible | mandatory | An entry in the E1 Threshold Status Table. |
| 1.3.6.1.4.1.321.1.3012.1016.1.1 | ColumnncmE1ThresholdStatusNIDIndex | read-only | mandatory | The object specifies the node id index of the node. |
| 1.3.6.1.4.1.321.1.3012.1016.1.2 | ColumnncmE1ThresholdStatusIndex | read-only | mandatory | This object is the identifier of an Interface on a managed device. If there is an ifEntry that is directly associated with this and only this DS1 interface, it… |
| 1.3.6.1.4.1.321.1.3012.1016.1.3 | ColumnncmE1CRCThreshold | read-only | mandatory | This variable indicates the CRC Error Threshold value . |
| 1.3.6.1.4.1.321.1.3012.1016.1.4 | ColumnncmE1CRCExceeded | read-only | mandatory | This variable indicates whether the CRC Error has exceeded the Threshold value or not. |
| 1.3.6.1.4.1.321.1.3012.1016.1.5 | ColumnncmE1SESThreshold | read-only | mandatory | This variable indicates the SES Error Threshold value . |
| 1.3.6.1.4.1.321.1.3012.1016.1.6 | ColumnncmE1SESExceeded | read-only | mandatory | This variable indicates whether the SES Error has exceeded the Threshold value or not. |
| 1.3.6.1.4.1.321.1.3012.1016.1.7 | ColumnncmE1UASThreshold | read-only | mandatory | This variable indicates the UAS Error Threshold value . |
| 1.3.6.1.4.1.321.1.3012.1016.1.8 | ColumnncmE1UASExceeded | read-only | mandatory | This variable indicates whether the UAS Error has exceeded the Threshold value or not. |
| 1.3.6.1.4.1.321.1.3012.1016.1.9 | ColumnncmE1BPVThresholdst | read-only | mandatory | This variable indicates the BPV Error Threshold value . |
| 1.3.6.1.4.1.321.1.3012.1016.1.10 | ColumnncmE1BPVExceeded | read-only | mandatory | This variable indicates whether the BPV Error has exceeded the Threshold value or not. |
| 1.3.6.1.4.1.321.1.3012.1016.1.11 | ColumnncmE1BERThreshold | read-only | mandatory | This variable indicates the BPV Error Threshold value . |
| 1.3.6.1.4.1.321.1.3012.1016.1.12 | ColumnncmE1BERExceeded | read-only | mandatory | This variable indicates whether the BER Error has exceeded the Threshold value or not. |
| 1.3.6.1.4.1.321.1.3012.1016.1.13 | ColumnncmE1RestoreState | read-only | mandatory | This variable indicates the Restore State of Threshold |
| 1.3.6.1.4.1.321.1.3012.1016.1.14 | ColumnncmE1LineRestoreSec | read-only | mandatory | This variable indicates the number of seconds until the line restores. |
| 1.3.6.1.4.1.321.1.3012.1017 | TablencmT1ConfigTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.321.1.3012.1017.1 | RowncmT1ConfigEntry | not-accessible | mandatory | An entry in the ncm T1 Configuration table. |
| 1.3.6.1.4.1.321.1.3012.1017.1.1 | ColumnncmT1ConfigNIDIndex | read-only | mandatory | This object is the identifier of the node id index. |
| 1.3.6.1.4.1.321.1.3012.1017.1.2 | ColumnncmT1LineIndex | read-only | mandatory | This object is the identifier of an Interface on a managed device. If there is an ifEntry that is directly associated with this and only this DS1 interface, it… |
| 1.3.6.1.4.1.321.1.3012.1017.1.3 | ColumnncmT1CRC6 | read-write | mandatory | This variable indicates Whether CRC6 is enabled or not |
| 1.3.6.1.4.1.321.1.3012.1017.1.4 | ColumnncmT1FramingFormat | read-write | mandatory | This variable indicates the variety of Line implementing this circuit. The type of circuit affects the number of bits per second that the circuit can reasonabl… |
| 1.3.6.1.4.1.321.1.3012.1017.1.5 | ColumnncmT1LineCoding | read-write | mandatory | This variable describes the variety of Zero Code Suppression used on the link, which in turn affects a number of its characteristics. B8ZS refers to the use of… |
| 1.3.6.1.4.1.321.1.3012.1017.1.6 | ColumnncmT1FramingType | read-write | mandatory | This variable indicates the framing type in this T1 port, i.e., CAS-BR, CAS-CC, CCS |
| 1.3.6.1.4.1.321.1.3012.1017.1.7 | ColumnncmT1FDL | read-write | mandatory | The variable specifies the Disable/Enable of the fdl State. |
| 1.3.6.1.4.1.321.1.3012.1017.1.8 | ColumnncmT1InbandISDNEnableDisable | read-write | mandatory | This variable indicates the Inband, ISDN enable and disable options. |
| 1.3.6.1.4.1.321.1.3012.1017.1.9 | ColumnncmT1EnableNetLoopback | read-write | mandatory | The variable specifies the Disable/Enable of the Network intiated Loopback. |
| 1.3.6.1.4.1.321.1.3012.1017.1.10 | ColumnncmT1EnableNetOnesDensity | read-write | mandatory | The variable specifies the Disable/Enable of the Network One's Density. |
| 1.3.6.1.4.1.321.1.3012.1017.1.11 | ColumnncmT1DensityPattern | read-write | mandatory | This variable indicates what type of density network is being sent on the port or line by the device. It only has significance only when object ncmT1EnableNetO… |
| 1.3.6.1.4.1.321.1.3012.1017.1.12 | ColumnncmT1EnableRepeaterLpbkTimeout | read-write | mandatory | The variable specifies whether repeater loopback is enabled or not. |
| 1.3.6.1.4.1.321.1.3012.1017.1.13 | ColumnncmT1RepeaterLoopbackTimeout | read-write | mandatory | The variable specifies the timeout value in seconds for repeater loopback. |
| 1.3.6.1.4.1.321.1.3012.1017.1.14 | ColumnncmT1UserAlarmDeclareTime | read-write | mandatory | The variable specifies the User ncmAlarm declaration Time in seconds. |
| 1.3.6.1.4.1.321.1.3012.1017.1.15 | ColumnncmT1State | read-write | mandatory | The variable specifies whether port state is in service or not. |
| 1.3.6.1.4.1.321.1.3012.1017.1.16 | ColumnncmT1NetworkLBOEQLIZ | read-write | mandatory | This variable indicates either (1) for long haul using, i.e., is 0 , -7.5db, -15db or -22.5db.[pvt]; or (2) for short haul or port using, i.e., is 0~133, 133~2… |
| 1.3.6.1.4.1.321.1.3012.1017.1.17 | ColumnncmT1TimeSlot | read-only | mandatory | This variable represents the timeslots used for the given port directly from the hardware crosspoint switch for example 1-10 if slot 1 to 10 are selected and 1… |
| 1.3.6.1.4.1.321.1.3012.1017.1.18 | ColumnncmT1TimeSlotSelect | read-write | mandatory | This variable indicates the number which is choosed for the inband/isdn timeslot. |
| 1.3.6.1.4.1.321.1.3012.1018 | TablencmT1PortStatusTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.321.1.3012.1018.1 | RowncmT1PortStatusEntry | not-accessible | mandatory | An entry in the ncm T1 Port Status Table. |
| 1.3.6.1.4.1.321.1.3012.1018.1.1 | ColumnncmT1PortStatusNIDIndex | read-only | mandatory | This object identifies the node id index. |
| 1.3.6.1.4.1.321.1.3012.1018.1.2 | ColumnncmT1PortStatusIndex | read-only | mandatory | The index value which uniquely identifies the interface to which this entry is applicable. |
| 1.3.6.1.4.1.321.1.3012.1018.1.3 | ColumnncmT1PortCRC6Error | read-only | mandatory | This variable indicates the occurance of CRC6 error. |
| 1.3.6.1.4.1.321.1.3012.1018.1.4 | ColumnncmT1PortFramingSlip | read-only | mandatory | This variable indicates the occurance of framing slip error. |
| 1.3.6.1.4.1.321.1.3012.1018.1.5 | ColumnncmT1PortRAI | read-only | mandatory | This variable indicates the occurance of RAI. |
| 1.3.6.1.4.1.321.1.3012.1018.1.6 | ColumnncmT1PortLOF | read-only | mandatory | This variable indicates the occurance of LOF. |
| 1.3.6.1.4.1.321.1.3012.1018.1.7 | ColumnncmT1PortAIS | read-only | mandatory | This variable indicates the occurance of AIS. |
| 1.3.6.1.4.1.321.1.3012.1018.1.8 | ColumnncmT1PortLOS | read-only | mandatory | This variable indicates the occurance of LOS. |
| 1.3.6.1.4.1.321.1.3012.1018.1.9 | ColumnncmT1PortBPVThresholdExceeded | read-only | mandatory | This variable indicates whether BPV threshold is exceeded or not. |
| 1.3.6.1.4.1.321.1.3012.1018.1.10 | ColumnncmT1BlockErrorCounter | read-only | mandatory | This variable indicates the Block Error Counter . |
| 1.3.6.1.4.1.321.1.3012.1018.1.11 | ColumnncmT1BERExceeded | read-only | mandatory | This variable indicates BER excceded or not |
| 1.3.6.1.4.1.321.1.3012.1018.1.12 | ColumnncmT1PortSendRAI | read-only | mandatory | This variable indicates whether send RAI is on or off |
| 1.3.6.1.4.1.321.1.3012.1018.1.13 | ColumnncmT1PortSendAIS | read-only | mandatory | This variable indicates whether send AIS is on or off |
| 1.3.6.1.4.1.321.1.3012.1018.1.14 | ColumnncmT1PortCGA | read-only | mandatory | This variable indicates whether CGA is on or off |
| 1.3.6.1.4.1.321.1.3012.1018.1.15 | ColumnncmT1PortLLB | read-only | mandatory | This variable indicates whether LLB is on or off |
| 1.3.6.1.4.1.321.1.3012.1018.1.16 | ColumnncmT1PortPLB | read-only | mandatory | This variable indicates whether PLB is on or off |
| 1.3.6.1.4.1.321.1.3012.1018.1.17 | ColumnncmT1PortLOC | read-only | mandatory | This variable indicates whether LOC is on or off |
| 1.3.6.1.4.1.321.1.3012.1018.1.18 | ColumnncmT1PortTestPattern | read-only | mandatory | This variable indicates the test patern in progress: 1 = none 2 = 3/24 3 = QRSS 4 = 2n20-1 5 = 1 in 8 6 = 2N15 - 1 7 = All Zeros 8 = 55 Octets 9 = all ones |
| 1.3.6.1.4.1.321.1.3012.1019 | TablencmT1CurrentTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.321.1.3012.1019.1 | RowncmT1CurrentEntry | not-accessible | mandatory | An entry in the ncm T1 Current table. |
| 1.3.6.1.4.1.321.1.3012.1019.1.1 | ColumnncmT1CurrentNIDIndex | read-only | mandatory | This object identifies the node id of the node. |
| 1.3.6.1.4.1.321.1.3012.1019.1.2 | ColumnncmT1CurrentIndex | read-only | mandatory | The index value which uniquely identifies the interf to which this entry is applicable. The interface identified by a particular value of this index is the sam… |
| 1.3.6.1.4.1.321.1.3012.1019.1.3 | ColumnncmT1CurrentEndType | read-only | mandatory | The variable specifies the End Type . |
| 1.3.6.1.4.1.321.1.3012.1019.1.4 | ColumnncmT1Timestamp | read-only | mandatory | The variable specifies the Timestamp in seconds . |
| 1.3.6.1.4.1.321.1.3012.1019.1.5 | ColumnncmT1Timestamp1 | read-only | mandatory | The variable specifies the Timestamp in millieseconds . |
| 1.3.6.1.4.1.321.1.3012.1019.1.6 | ColumnncmT1CurrentIntervalSec | read-only | mandatory | The variable specifies the Current Interval seconds . |
| 1.3.6.1.4.1.321.1.3012.1019.1.7 | ColumnncmT1CurrentASs | read-only | mandatory | The number of Availabe Seconds, encountered by a DS1 interface in the current 15 minute inter- val. |
| 1.3.6.1.4.1.321.1.3012.1019.1.8 | ColumnncmT1CurrentUASs | read-only | mandatory | The number of Out of Unavailable Seconds encountered by a DS1 interface in the current 15 minute in- terval. |
| 1.3.6.1.4.1.321.1.3012.1019.1.9 | ColumnncmT1CurrentESs | read-only | mandatory | The number of Errored Seconds encountered by a DS1 interface in the current 15 minute in- terval. |
| 1.3.6.1.4.1.321.1.3012.1019.1.10 | ColumnncmT1CurrentBESs | read-only | mandatory | The number of Bursty Errored Seconds encountered by a DS1 interface in the current 15 minute in- terval. |
| 1.3.6.1.4.1.321.1.3012.1019.1.11 | ColumnncmT1CurrentSESs | read-only | mandatory | The number of Severely Errored Seconds encountered by a DS1 interface in the current 15 minute in- terval. |
| 1.3.6.1.4.1.321.1.3012.1019.1.12 | ColumnncmT1CurrentSEFs | read-only | mandatory | The number of Severely Errored Framing Seconds encountered by a DS1 interface in the current 15 minute in-terval. |
| 1.3.6.1.4.1.321.1.3012.1019.1.13 | ColumnncmT1CurrentLOSs | read-only | mandatory | The number of Loss of Signal Seconds encountered by a DS1 interface in the current 15 minute in- terval. |
| 1.3.6.1.4.1.321.1.3012.1019.1.14 | ColumnncmT1CurrentAISs | read-only | mandatory | The number of ncmAlarm Indication Signal Seconds encountered by a DS1 interface in the current 15 minute in-terval. |
| 1.3.6.1.4.1.321.1.3012.1019.1.15 | ColumnncmT1CurrentLOFs | read-only | mandatory | The number of Loss Of Frame Seconds encountered by a DS1 interface in the current 15 minute in- terval. |
| 1.3.6.1.4.1.321.1.3012.1019.1.16 | ColumnncmT1CurrentOOFs | read-only | mandatory | The number of Out Of Frame Seconds encountered by a DS1 interface in the current 15 minute in- terval. |
| 1.3.6.1.4.1.321.1.3012.1019.1.17 | ColumnncmT1CurrentESsTypeA | read-only | mandatory | The number of Errored seconds of type A encountered by a DS1 interface in the current 15 minute in- terval. |
| 1.3.6.1.4.1.321.1.3012.1019.1.18 | ColumnncmT1CurrentSASs | read-only | mandatory | The number of SEF/AIS encountered by a DS1 interface in the current 15 minute in- terval. |
| 1.3.6.1.4.1.321.1.3012.1019.1.19 | ColumnncmT1CurrentCSSs | read-only | mandatory | The number of controlled slip seconds encountered by a DS1 interface in the current 15 minute in- terval. |
| 1.3.6.1.4.1.321.1.3012.1019.1.20 | ColumnncmT1CurrentLOFC | read-only | mandatory | The number of Loss of frame counts encountered by a DS1 interface in the current 15 minute in- terval. |
| 1.3.6.1.4.1.321.1.3012.1019.1.21 | ColumnncmT1CurrentFrameErrCount | read-only | mandatory | The number of Framing Error Count encountered by a DS1 interface in the current 15 minute in- terval. |
| 1.3.6.1.4.1.321.1.3012.1019.1.22 | ColumnncmT1CurrentErrorFreeSec | read-only | mandatory | The number of Error Free Seconds encountered by a DS1 interface in the current 15 minute in- terval. |
| 1.3.6.1.4.1.321.1.3012.1019.1.23 | ColumnncmT1CurrentDegradedMin | read-only | mandatory | The number of Degraded Minutes encountered by a DS1 interface in the current 15 minute in- terval. |
| 1.3.6.1.4.1.321.1.3012.1020 | TablencmT1IntervalTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.321.1.3012.1020.1 | RowncmT1IntervalEntry | not-accessible | mandatory | An entry in the ncm T1 Interval table. |
| 1.3.6.1.4.1.321.1.3012.1020.1.1 | ColumnncmT1IntervalNIDIndex | read-only | mandatory | The object specifies the node id index. |
| 1.3.6.1.4.1.321.1.3012.1020.1.2 | ColumnncmT1IntervalIndex | read-only | mandatory | The index value which uniquely identifies the DS1 interface to which this entry is applica- ble. The interface identified by a particular value of this index i… |
| 1.3.6.1.4.1.321.1.3012.1020.1.3 | ColumnncmT1IntervalEndType | read-only | mandatory | The variable specifies the End Type . |
| 1.3.6.1.4.1.321.1.3012.1020.1.4 | ColumnncmT1IntervalNumber | read-only | mandatory | A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes inter- val (assuming tha… |
| 1.3.6.1.4.1.321.1.3012.1020.1.5 | ColumnncmT1IntervalASs | read-only | mandatory | The number of Available Seconds encountered by a DS1 interface in one of the previous 96, indi- vidual 15 minute, intervals. |
| 1.3.6.1.4.1.321.1.3012.1020.1.6 | ColumnncmT1IntervalUASs | read-only | mandatory | The number of Unavailable Seconds encoun- tered by a DS1 interface in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.321.1.3012.1020.1.7 | ColumnncmT1IntervalESs | read-only | mandatory | The number of Error Seconds encoun- tered by a DS1 interface in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.321.1.3012.1020.1.8 | ColumnncmT1IntervalBESs | read-only | mandatory | The number of Bursty Error Seconds encoun- tered by a DS1 interface in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.321.1.3012.1020.1.9 | ColumnncmT1IntervalSESs | read-only | mandatory | The number of Severe Error Seconds encoun- tered by a DS1 interface in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.321.1.3012.1020.1.10 | ColumnncmT1IntervalSEFs | read-only | mandatory | The number of Severely Errored Framing Seconds encountered by a DS1 interface in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.321.1.3012.1020.1.11 | ColumnncmT1IntervalLOSs | read-only | mandatory | The number of Loss of Signal Seconds encoun- tered by a DS1 interface in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.321.1.3012.1020.1.12 | ColumnncmT1IntervalAISs | read-only | mandatory | The number of ncmAlarm Indication Signal Seconds encoun- tered by a DS1 interface in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.321.1.3012.1020.1.13 | ColumnncmT1IntervalLOFs | read-only | mandatory | The number of Loss Of Frame Seconds encoun- tered by a DS1 interface in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.321.1.3012.1020.1.14 | ColumnncmT1IntervalOOFs | read-only | mandatory | The number of Out Of Frame Seconds encoun- tered by a DS1 interface in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.321.1.3012.1020.1.15 | ColumnncmT1IntervalESsTypeA | read-only | mandatory | The number of Errored seconds of type A encountered by a DS1 interface in one of the previous 96, individual 15 minute interval. |
| 1.3.6.1.4.1.321.1.3012.1020.1.16 | ColumnncmT1IntervalSASs | read-only | mandatory | The number of SEF/AIS encountered by a DS1 interface in one of the previous 96, individual 15 minute interval. |
| 1.3.6.1.4.1.321.1.3012.1020.1.17 | ColumnncmT1IntervalCSSs | read-only | mandatory | The number of controlled slip seconds encountered by a DS1 interface in one of the previous 96, individual 15 minute interval. |
| 1.3.6.1.4.1.321.1.3012.1020.1.18 | ColumnncmT1IntervalLOFC | read-only | mandatory | The number of Loss of frame counts encountered by a DS1 interface in one of the previous 96, individual 15 minute interval. |
| 1.3.6.1.4.1.321.1.3012.1020.1.19 | ColumnncmT1IntervalFrameErr | read-only | mandatory | The number of Framing Error Count encountered by a DS1 interface in one of the previous 96, individual 15 minute interval. |
| 1.3.6.1.4.1.321.1.3012.1020.1.20 | ColumnncmT1IntervalErrFreeSec | read-only | mandatory | The number of Error Free Seconds encountered by a DS1 interface in one of the previous 96, individual 15 minute interval. |
| 1.3.6.1.4.1.321.1.3012.1020.1.21 | ColumnncmT1IntervalDegradMin | read-only | mandatory | The number of Degraded Minutes encountered by a DS1 interface in one of the previous 96, individual 15 minute interval. |
| 1.3.6.1.4.1.321.1.3012.1021 | TablencmT1TotalTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.321.1.3012.1021.1 | RowncmT1TotalEntry | not-accessible | mandatory | An entry in the DS1 Total Loss table. |
| 1.3.6.1.4.1.321.1.3012.1021.1.1 | ColumnncmT1TotalNIDIndex | read-only | mandatory | The object specifies the node id index of the node. |
| 1.3.6.1.4.1.321.1.3012.1021.1.2 | ColumnncmT1TotalIndex | read-only | mandatory | The index value which uniquely identifies the DS1 interface to which this entry is applica- ble. The interface identified by a particular value of this index i… |
| 1.3.6.1.4.1.321.1.3012.1021.1.3 | ColumnncmT1TotalEndType | read-only | mandatory | The variable specifies the End Type . |
| 1.3.6.1.4.1.321.1.3012.1021.1.4 | ColumnncmT1NumberOfValidIntervals | read-only | mandatory | The number of previous intervals for which valid data was collected. The value will be 96 unless the interface was brought on-line within the last 24 hours, in… |
| 1.3.6.1.4.1.321.1.3012.1021.1.5 | ColumnncmT1TotalASs | read-only | mandatory | The number of Available Seconds encountered by a DS1 interface in the previous 24 hour interval. |
| 1.3.6.1.4.1.321.1.3012.1021.1.6 | ColumnncmT1TotalUASs | read-only | mandatory | The number of Unavailable Seconds encoun- tered by a DS1 interface in the previous 24 hour interval. |
| 1.3.6.1.4.1.321.1.3012.1021.1.7 | ColumnncmT1TotalESs | read-only | mandatory | The number of Unavailable Seconds encoun- tered by a DS1 interface in the previous 24 hour interval. |
| 1.3.6.1.4.1.321.1.3012.1021.1.8 | ColumnncmT1TotalBESs | read-only | mandatory | The number of Unavailable Seconds encoun- tered by a DS1 interface in the previous 24 hour interval. |
| 1.3.6.1.4.1.321.1.3012.1021.1.9 | ColumnncmT1TotalSESs | read-only | mandatory | The number of Severly errored Seconds encoun- tered by a DS1 interface in the previous 24 hour interval. |
| 1.3.6.1.4.1.321.1.3012.1021.1.10 | ColumnncmT1TotalSEFs | read-only | mandatory | The number of Severly Errored frame Seconds encoun- tered by a DS1 interface in the previous 24 hour interval. |
| 1.3.6.1.4.1.321.1.3012.1021.1.11 | ColumnncmT1TotalLOSs | read-only | mandatory | The number of Loss Of Signal Errors encoun- tered by a DS1 interface in the previous 24 hour interval. |
| 1.3.6.1.4.1.321.1.3012.1021.1.12 | ColumnncmT1TotalAISs | read-only | mandatory | The number of ncmAlarm Indication Signal Seconds encoun- tered by a DS1 interface in the previous 24 hour interval. |
| 1.3.6.1.4.1.321.1.3012.1021.1.13 | ColumnncmT1TotalLOFs | read-only | mandatory | The number of Loss Of Frame Seconds encoun- tered by a DS1 interface in the previous 24 hour interval. |
| 1.3.6.1.4.1.321.1.3012.1021.1.14 | ColumnncmT1TotalOOFs | read-only | mandatory | The number of Out Of Frame Seconds encoun- tered by a DS1 interface in the previous 24 hour interval. |
| 1.3.6.1.4.1.321.1.3012.1021.1.15 | ColumnncmT1TotalESsTypeA | read-only | mandatory | The number of Errored seconds of type A encountered by a DS1 interface in the previous 24 hour in terval. |
| 1.3.6.1.4.1.321.1.3012.1021.1.16 | ColumnncmT1TotalSASs | read-only | mandatory | The number of SEF/AIS encountered by a DS1 interface in the previous 24 hour in- terval. |
| 1.3.6.1.4.1.321.1.3012.1021.1.17 | ColumnncmT1TotalCSSs | read-only | mandatory | The number of controlled slip seconds encountered by a DS1 interface in the previous 24 hour in- terval. |
| 1.3.6.1.4.1.321.1.3012.1021.1.18 | ColumnncmT1TotalLOFC | read-only | mandatory | The number of Loss of frame counts encountered by a DS1 interface in the previous 24 hour in- terval. |
| 1.3.6.1.4.1.321.1.3012.1021.1.19 | ColumnncmT1TotalFrameErrCount | read-only | mandatory | The number of Framing Error Count encountered by a DS1 interface in the previous 24 hour in- terval. |
| 1.3.6.1.4.1.321.1.3012.1021.1.20 | ColumnncmT1TotalErrorFreeSec | read-only | mandatory | The number of Error free seconds encountered by a DS1 interface in the previous 24 hour in- terval. |
| 1.3.6.1.4.1.321.1.3012.1021.1.21 | ColumnncmT1TotalDegradedMin | read-only | mandatory | The number of Degraded Minutes encountered by a DS1 interface in the previous 24 hour in- terval. |
| 1.3.6.1.4.1.321.1.3012.1022 | TablencmT1PrevTotalTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.321.1.3012.1022.1 | RowncmT1PrevTotalEntry | not-accessible | mandatory | An entry in the DS1 Total Loss table. |
| 1.3.6.1.4.1.321.1.3012.1022.1.1 | ColumnncmT1PrevTotalNIDIndex | read-only | mandatory | The object specifies the node id index of the node. |
| 1.3.6.1.4.1.321.1.3012.1022.1.2 | ColumnncmT1PrevTotalIndex | read-only | mandatory | The index value which uniquely identifies the DS1 interface to which this entry is applica- ble. The interface identified by a particular value of this index i… |
| 1.3.6.1.4.1.321.1.3012.1022.1.3 | ColumnncmT1PrevTotalEndType | read-only | mandatory | The variable specifies the End Type . |
| 1.3.6.1.4.1.321.1.3012.1022.1.4 | ColumnncmT1PrevTotalASs | read-only | mandatory | The number of Available Seconds encountered by a DS1 interface in the previous 24 hour interval. |
| 1.3.6.1.4.1.321.1.3012.1022.1.5 | ColumnncmT1PrevTotalUASs | read-only | mandatory | The number of Unavailable Seconds encoun- tered by a DS1 interface in the previous 24 hour interval. |
| 1.3.6.1.4.1.321.1.3012.1022.1.6 | ColumnncmT1PrevTotalESs | read-only | mandatory | The number of Unavailable Seconds encoun- tered by a DS1 interface in the previous 24 hour interval. |
| 1.3.6.1.4.1.321.1.3012.1022.1.7 | ColumnncmT1PrevTotalBESs | read-only | mandatory | The number of Unavailable Seconds encoun- tered by a DS1 interface in the previous 24 hour interval. |
| 1.3.6.1.4.1.321.1.3012.1022.1.8 | ColumnncmT1PrevTotalSESs | read-only | mandatory | The number of Severly Errored Seconds encoun- tered by a DS1 interface in the previous 24 hour interval. |
| 1.3.6.1.4.1.321.1.3012.1022.1.9 | ColumnncmT1PrevTotalSEFs | read-only | mandatory | The number of Severly Errored frame Seconds encoun- tered by a DS1 interface in the previous 24 hour interval. |
| 1.3.6.1.4.1.321.1.3012.1022.1.10 | ColumnncmT1PrevTotalLOSs | read-only | mandatory | The number of Loss Of Signal Errors encoun- tered by a DS1 interface in the previous 24 hour interval. |
| 1.3.6.1.4.1.321.1.3012.1022.1.11 | ColumnncmT1PrevTotalAISs | read-only | mandatory | The number of ncmAlarm Indication Signal Seconds encoun- tered by a DS1 interface in the previous 24 hour interval. |
| 1.3.6.1.4.1.321.1.3012.1022.1.12 | ColumnncmT1PrevTotalLOFs | read-only | mandatory | The number of Loss Of Frame Seconds encoun- tered by a DS1 interface in the previous 24 hour interval. |
| 1.3.6.1.4.1.321.1.3012.1022.1.13 | ColumnncmT1PrevTotalOOFs | read-only | mandatory | The number of Out Of Frame Seconds encoun- tered by a DS1 interface in the previous 24 hour interval. |
| 1.3.6.1.4.1.321.1.3012.1022.1.14 | ColumnncmT1PrevTotalESsTypeA | read-only | mandatory | The number of Errored seconds of type A encountered by a DS1 interface in the previous 24 hour in- terval. |
| 1.3.6.1.4.1.321.1.3012.1022.1.15 | ColumnncmT1PrevTotalSASs | read-only | mandatory | The number of SEF/AIS encountered by a DS1 interface in the previous 24 hour in- terval. |
| 1.3.6.1.4.1.321.1.3012.1022.1.16 | ColumnncmT1PrevTotalCSSs | read-only | mandatory | The number of controlled slip seconds encountered by a DS1 interface in the previous in- terval. |
| 1.3.6.1.4.1.321.1.3012.1022.1.17 | ColumnncmT1PrevTotalLOFC | read-only | mandatory | The number of Loss of frame counts encountered by a DS1 interface in the previous in- terval. |
| 1.3.6.1.4.1.321.1.3012.1022.1.18 | ColumnncmT1PrevTotalFrameErrCount | read-only | mandatory | The number of Framing Error Count encountered by a DS1 interface in the previous in- terval. |
| 1.3.6.1.4.1.321.1.3012.1022.1.19 | ColumnncmT1PrevTotalErrorFreeSec | read-only | mandatory | The number of Error free seconds encountered by a DS1 interface in the previous in- terval. |
| 1.3.6.1.4.1.321.1.3012.1022.1.20 | ColumnncmT1PrevTotalDegradedMin | read-only | mandatory | The number of Degraded Minutes encountered by a DS1 interface in the previous in- terval. |
| 1.3.6.1.4.1.321.1.3012.1023 | TablencmT1PreformanceSnapShotTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.321.1.3012.1023.1 | RowncmT1PreformanceSnapShotEntry | not-accessible | mandatory | An entry in the T1 Performance Snap Shot Entry table. |
| 1.3.6.1.4.1.321.1.3012.1023.1.1 | ColumnncmT1SnapShotNIDIndex | read-only | mandatory | The object specifies the node id index of the node. |
| 1.3.6.1.4.1.321.1.3012.1023.1.2 | ColumnncmT1SnapShotIndex | read-only | mandatory | The index value which uniquely identifies the DS1 interface to which this entry is applica- ble. The interface identified by a particular value of this index i… |
| 1.3.6.1.4.1.321.1.3012.1023.1.3 | ColumnncmT1SnapShotEndType | read-only | mandatory | The variable specifies the End Type . |
| 1.3.6.1.4.1.321.1.3012.1023.1.4 | ColumnncmT1SnapShot | read-write | mandatory | The variable specifies the option to intiate snap shot command. |
| 1.3.6.1.4.1.321.1.3012.1023.1.5 | ColumnncmT1TimeStampSec | read-only | mandatory | The variable specifies the Time Stamp in Seconds . |
| 1.3.6.1.4.1.321.1.3012.1023.1.6 | ColumnncmT1TimeStampMilliSec | read-only | mandatory | The variable specifies the Time Stamp in milli Seconds . |
| 1.3.6.1.4.1.321.1.3012.1023.1.7 | ColumnncmT1CurrIntervalSec | read-only | mandatory | The variable specifies the current interval in Seconds . |
| 1.3.6.1.4.1.321.1.3012.1023.1.8 | ColumnncmT1ResetPerfReg | read-write | mandatory | Reset Performance Monitoring registers. |
| 1.3.6.1.4.1.321.1.3012.1024 | TablencmAdvancedT1ConfigTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.321.1.3012.1024.1 | RowncmAdvancedT1ConfigEntry | not-accessible | mandatory | An entry in the Advanced T1 Configuration table . |
| 1.3.6.1.4.1.321.1.3012.1024.1.1 | ColumnncmAdvancedT1NIDIndex | read-only | mandatory | The object specifies the node id of the node. |
| 1.3.6.1.4.1.321.1.3012.1024.1.2 | ColumnncmAdvancedT1LineIndex | read-only | mandatory | The index value which uniquely identifies the interface to which this entry is applicable. |
| 1.3.6.1.4.1.321.1.3012.1024.1.3 | ColumnncmadvfdlMode | read-write | mandatory | The variable specifies the fdl mode which is bit 0 of fdl Parameter1. |
| 1.3.6.1.4.1.321.1.3012.1024.1.4 | ColumnncmadvfdlStandard | read-write | mandatory | The variable specifies the fdl standard which is bits 1 and bit 2 of fdl Parameter1. |
| 1.3.6.1.4.1.321.1.3012.1024.1.5 | ColumnncmadvfdlPerformanceReport | read-write | mandatory | The variable specifies the fdl standard which is bits 3 and bit 4 of fdl Parameter1. |
| 1.3.6.1.4.1.321.1.3012.1024.1.6 | ColumnncmadvfdlLBEnable | read-write | mandatory | The variable specifies the Disable/Enable of the fdl Loopback which is bit 0 of the fdl-loop |
| 1.3.6.1.4.1.321.1.3012.1024.1.7 | ColumnncmadvfdlLLBT1BOPMsg | read-write | mandatory | The variable specifies the Disable/Enable of the send/receive of the LLB T1.403 BOP Messages. It is the bit 1 of the fdl-loop. |
| 1.3.6.1.4.1.321.1.3012.1024.1.8 | ColumnncmadvfdlPLBT1BOPMsg | read-write | mandatory | The variable specifies the Disable/Enable of the send/receive of the PLB T1.403 BOP Messages. It is the bit 2 of the fdl-loop |
| 1.3.6.1.4.1.321.1.3012.1024.1.9 | ColumnncmadvfdlIdlePattern | read-write | mandatory | The variable specifies the fdl idle pattern which is bit 0 of fdl Parameter2. |
| 1.3.6.1.4.1.321.1.3012.1024.1.10 | ColumnncmadvfdlMonitoringCsuType | read-write | mandatory | The variable specifies the fdl standard which is bits 1 and bit 2 of fdl Parameter2. |
| 1.3.6.1.4.1.321.1.3012.1025 | TablencmT1LatchedStatusTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.321.1.3012.1025.1 | RowncmT1LatchedStatusEntry | not-accessible | mandatory | An entry in the DS1 Port Latched Status Table. |
| 1.3.6.1.4.1.321.1.3012.1025.1.1 | ColumnncmT1LatchedStatusNIDIndex | read-only | mandatory | The object specifies the node id of the node. |
| 1.3.6.1.4.1.321.1.3012.1025.1.2 | ColumnncmT1LatchedStatusIndex | read-only | mandatory | The index value which uniquely identifies the interface to which this entry is applicable. |
| 1.3.6.1.4.1.321.1.3012.1025.1.3 | ColumnncmT1LatchedStatusEndType | read-only | mandatory | The variable specifies the End Type . |
| 1.3.6.1.4.1.321.1.3012.1025.1.4 | ColumnncmT1LatchedStatusCRC6Error | read-only | mandatory | This variable indicates the occurance of CRC6 error of the port latched status. |
| 1.3.6.1.4.1.321.1.3012.1025.1.5 | ColumnncmT1LatchedStatusFramingSlip | read-only | mandatory | This variable indicates the occurance of framing slip error of the port latched status. |
| 1.3.6.1.4.1.321.1.3012.1025.1.6 | ColumnncmT1LatchedStatusRAI | read-only | mandatory | This variable indicates the occurance Latched status of RAI for T1 port. |
| 1.3.6.1.4.1.321.1.3012.1025.1.7 | ColumnncmT1LatchedStatusLOF | read-only | mandatory | This variable indicates the occurance Latched status of LOF of T1 port. |
| 1.3.6.1.4.1.321.1.3012.1025.1.8 | ColumnncmT1LatchedStatusAIS | read-only | mandatory | This variable indicates the occurance T1 port Latched status of AIS. |
| 1.3.6.1.4.1.321.1.3012.1025.1.9 | ColumnncmT1LatchedStatusLOS | read-only | mandatory | This variable indicates the occurance Latched Status of LOS for T1 port. |
| 1.3.6.1.4.1.321.1.3012.1025.1.10 | ColumnncmT1LatchedStatusBPVThreExcd | read-only | mandatory | This variable indicates the BPV Threshold Exceeded of T1 port Latched Status. |
| 1.3.6.1.4.1.321.1.3012.1025.1.11 | ColumnncmT1LatchedStatusBERExceeded | read-only | mandatory | This variable indicates the BER Exceeded of T1 port Latched Status. |
| 1.3.6.1.4.1.321.1.3012.1026 | TablencmT1ThresholdStatusTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.321.1.3012.1026.1 | RowncmT1ThresholdStatusEntry | not-accessible | mandatory | An entry in the DS1 Port Threshold Status Table. |
| 1.3.6.1.4.1.321.1.3012.1026.1.1 | ColumnncmT1ThresholdStatusNIDIndex | read-only | mandatory | The object specifies the node id of the node. |
| 1.3.6.1.4.1.321.1.3012.1026.1.2 | ColumnncmT1ThresholdStatusIndex | read-only | mandatory | The index value which uniquely identifies the interface to which this entry is applicable. |
| 1.3.6.1.4.1.321.1.3012.1026.1.3 | ColumnncmT1ThresholdStatusEndType | read-only | mandatory | The variable specifies the End Type . |
| 1.3.6.1.4.1.321.1.3012.1026.1.4 | ColumnncmT1ThresholdRestoreState | read-only | mandatory | This variable indicates the restore state of T1 port threshold status. |
| 1.3.6.1.4.1.321.1.3012.1026.1.5 | ColumnncmT1ThresholdSecLineRestore | read-only | mandatory | This variable indicates the number of second until line restores(if restore mode is AUTO) of T1 port threshold Status. |
| 1.3.6.1.4.1.321.1.3012.1026.1.6 | ColumnncmT1ThresholdBERExceeded | read-only | mandatory | This variable indicates BER exceeded or not of T1 Threshold Status. |
| 1.3.6.1.4.1.321.1.3012.1026.1.7 | ColumnncmT1ThresholdBERCount | read-only | mandatory | This variable indicates the BER Count(reserved - always 0) of T1 port threshold Status. |
| 1.3.6.1.4.1.321.1.3012.1026.1.8 | ColumnncmT1ThresholdSESExceeded | read-only | mandatory | This variable indicates SES exceeded or not of T1 Threshold Status. |
| 1.3.6.1.4.1.321.1.3012.1026.1.9 | ColumnncmT1ThresholdSESCount | read-only | mandatory | This variable indicates the SES Count of T1 port threshold Status. |
| 1.3.6.1.4.1.321.1.3012.1026.1.10 | ColumnncmT1ThresholdUASExceeded | read-only | mandatory | This variable indicates UAS exceeded or not of T1 Threshold Status. |
| 1.3.6.1.4.1.321.1.3012.1026.1.11 | ColumnncmT1ThresholdUASCount | read-only | mandatory | This variable indicates the UAS Count of T1 port threshold Status. |
| 1.3.6.1.4.1.321.1.3012.1026.1.12 | ColumnncmT1ThresholdCRCExceeded | read-only | mandatory | This variable indicates CRC exceeded or not of T1 Threshold Status. |
| 1.3.6.1.4.1.321.1.3012.1026.1.13 | ColumnncmT1ThresholdCRCCount | read-only | mandatory | This variable indicates the CRC Count of T1 port threshold Status. |
| 1.3.6.1.4.1.321.1.3012.1026.1.14 | ColumnncmT1ThresholdBPVExceeded | read-only | mandatory | This variable indicates BPV exceeded or not of T1 Threshold Status. |
| 1.3.6.1.4.1.321.1.3012.1026.1.15 | ColumnncmT1ThresholdBPVCount | read-only | mandatory | This variable indicates the BPV Count of T1 port threshold Status. |
| 1.3.6.1.4.1.321.1.3012.1027 | TablencmT1PerformanceCountersTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.321.1.3012.1027.1 | RowncmT1PerformanceCountersEntry | not-accessible | mandatory | An entry in the ncm T1 Performance Counters Entry table. |
| 1.3.6.1.4.1.321.1.3012.1027.1.1 | ColumnncmT1PerfCountNIDIndex | read-only | mandatory | The object specifies the node id index of the node. |
| 1.3.6.1.4.1.321.1.3012.1027.1.2 | ColumnncmT1PerfCountIndex | read-only | mandatory | The index value which uniquely identifies the interface to which this entry is applicable. |
| 1.3.6.1.4.1.321.1.3012.1027.1.3 | ColumnncmT1PerfCountEndType | read-only | mandatory | The variable specifies the End Type of T1 Performance Counter. |
| 1.3.6.1.4.1.321.1.3012.1027.1.4 | ColumnncmT1PerfCountFrameMode | read-only | mandatory | The variable specifies the Framing Mode of T1 Performance Counter. |
| 1.3.6.1.4.1.321.1.3012.1027.1.5 | ColumnncmT1PerfCountCurESFErrEvt | read-only | mandatory | This variable specifies the Current ESF events of T1 Performance Counter. This object has no significance for QUAD cards. |
| 1.3.6.1.4.1.321.1.3012.1027.1.6 | ColumnncmT1PerfCountCurBPVErrCnt | read-only | mandatory | This variable specifies the Current BPV counts of T1 Performance Counter. This object has no significance for QUAD cards. |
| 1.3.6.1.4.1.321.1.3012.1027.1.7 | ColumnncmT1PerfCountCurFrameErrCnt | read-only | mandatory | This variable specifies the Current Frame Error counts of T1 Performance Counter. This object has no significance for QUAD cards. |
| 1.3.6.1.4.1.321.1.3012.1027.1.8 | ColumnncmT1PerfCountCurCRC6Error | read-only | mandatory | This variable specifies the Current CRC-6 errors of T1 Performance Counter. This object has no significance for QUAD cards. |
| 1.3.6.1.4.1.321.1.3012.1027.1.9 | ColumnncmT1ResetPerfCount | read-write | mandatory | Reset ncm T1 Performance Counters. |
| 1.3.6.1.4.1.321.1.3012.1028 | TablencmDataPortConfigTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.321.1.3012.1028.1 | RowncmDataPortConfigEntry | not-accessible | mandatory | An entry in the ncmData Port Configuration Entry table. |
| 1.3.6.1.4.1.321.1.3012.1028.1.1 | ColumnncmDataPortConfigNIDIndex | read-only | mandatory | The object specifies the node id of the node. |
| 1.3.6.1.4.1.321.1.3012.1028.1.2 | ColumnncmDataPortConfigIndex | read-only | mandatory | The index value which uniquely identifies the interface to which this entry is applicable. |
| 1.3.6.1.4.1.321.1.3012.1028.1.3 | ColumnncmDataPortConfigMode | read-write | mandatory | The variable specifies the data port mode whether it is configured as DTE/DCE. |
| 1.3.6.1.4.1.321.1.3012.1028.1.4 | ColumnncmDataPortConfigLineIndicate | read-write | mandatory | The variable specifies the control line indicator for X.21 only, set to 0 if line is low while set to 1 if line is high. |
| 1.3.6.1.4.1.321.1.3012.1028.1.5 | ColumnncmDataPortLineStatusCDCC | read-write | mandatory | The variable specifies the bit 0 status of control line; where 0=low, 1=high; Status is CD/DTR if Mode = DTE while is CC/DSR if Mode = DCE |
| 1.3.6.1.4.1.321.1.3012.1028.1.6 | ColumnncmDataPortLineStatusCACB | read-write | mandatory | The variable specifies the bit 1 status of control line; where 0=low, 1=high; Status is CA/RTS if Mode = DTE while is CB/CTS if Mode = DCE |
| 1.3.6.1.4.1.321.1.3012.1028.1.7 | ColumnncmDataPortLineStatusLLCJ | read-write | mandatory | The variable specifies the bit 2 status of control line; where 0=low, 1=high; Status is LL if Mode = DTE while is CJ/DCD if Mode = DCE |
| 1.3.6.1.4.1.321.1.3012.1028.1.8 | ColumnncmDataPortLineStatusRLTM | read-write | mandatory | The variable specifies the bit 2 status of control line; where 0=low, 1=high; Status is RL if Mode = DTE while is TM if Mode = DCE |
| 1.3.6.1.4.1.321.1.3012.1028.1.9 | ColumnncmDataPortConfigLOS | read-write | mandatory | The variable specifies the bit 7 status of control line; where 0=disable, 1=enable; Status is LOS Mode |
| 1.3.6.1.4.1.321.1.3012.1028.1.10 | ColumnncmDataPortConfigServiceState | read-write | mandatory | The variable specifies the service state of this data port. |
| 1.3.6.1.4.1.321.1.3012.1028.1.11 | ColumnncmDataPortConfigClkOpt | read-write | mandatory | The variable specifies the clocking option of this data port. |
| 1.3.6.1.4.1.321.1.3012.1029 | TablencmDataPortStatusTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.321.1.3012.1029.1 | RowncmDataPortStatusEntry | not-accessible | mandatory | An entry in the ncmData Port Status Entry table. |
| 1.3.6.1.4.1.321.1.3012.1029.1.1 | ColumnncmDataPortStatusNIDIndex | read-only | mandatory | The object specifies the node id of the node. |
| 1.3.6.1.4.1.321.1.3012.1029.1.2 | ColumnncmDataPortStatusIndex | read-only | mandatory | The index value which uniquely identifies the interface to which this entry is applicable. |
| 1.3.6.1.4.1.321.1.3012.1029.1.3 | ColumnncmDataPortStatusMode | read-only | mandatory | The variable specifies the data port mode whether it is configured as DCE/DCE. |
| 1.3.6.1.4.1.321.1.3012.1029.1.4 | ColumnncmDataPortStatusLineIndicate | read-only | mandatory | The variable specifies the control line indicator for X.21 only, set to 0 if line is low while set to 1 if line is high. |
| 1.3.6.1.4.1.321.1.3012.1029.1.5 | ColumnncmDataPortStatusLineCDCC | read-only | mandatory | The variable specifies the bit 0 status of control line; where 0=low, 1=high; Status is CD/DTR if Mode = DTE while is CC/DSR if Mode = DCE |
| 1.3.6.1.4.1.321.1.3012.1029.1.6 | ColumnncmDataPortStatusLineCACB | read-only | mandatory | The variable specifies the bit 1 status of control line; where 0=low, 1=high; Status is CA/RTS if Mode = DTE while is CB/CTS if Mode = DCE |
| 1.3.6.1.4.1.321.1.3012.1029.1.7 | ColumnncmDataPortStatusLineLLCJ | read-only | mandatory | The variable specifies the bit 2 status of control line; where 0=low, 1=high; Status is LL if Mode = DTE while is CJ/DCD if Mode = DCE |
| 1.3.6.1.4.1.321.1.3012.1029.1.8 | ColumnncmDataPortStatusLineRLTM | read-only | mandatory | The variable specifies the bit 3 status of control line; where 0=low, 1=high; Status is RL if Mode = DTE while is TM if Mode = DCE |
| 1.3.6.1.4.1.321.1.3012.1029.1.9 | ColumnncmDataPortStatusLineLOS | read-only | mandatory | The variable specifies the bit 7 status of control line; where 0=disable, 1=enable; Status is LOS Mode |
| 1.3.6.1.4.1.321.1.3012.1029.1.10 | ColumnncmDataPortStatusServiceState | read-only | mandatory | The variable specifies the service state of this data port. |
| 1.3.6.1.4.1.321.1.3012.1029.1.11 | ColumnncmDataPortStatusCimType | read-only | mandatory | The variable specifies the connector interface module type of this data port. |
| 1.3.6.1.4.1.321.1.3012.1029.1.12 | ColumnncmDataPortStatusLoopback | read-only | mandatory | The variable specifies the loopback diagnostic status of this data port. |
| 1.3.6.1.4.1.321.1.3012.1029.1.13 | ColumnncmDataPortTestPattern | read-only | mandatory | The variable specifies the test pattern in progress of this data port. |
| 1.3.6.1.4.1.321.1.3012.1029.1.14 | ColumnncmDataPortTstPatErrCount | read-only | mandatory | This variable indicates the Test Pattern Error Count. |
| 1.3.6.1.4.1.321.1.3012.1030 | TablencmALARMConfigTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.321.1.3012.1030.1 | RowncmALARMConfigEntry | not-accessible | mandatory | An entry in the ncmAlarm Configure table. |
| 1.3.6.1.4.1.321.1.3012.1030.1.1 | ColumnncmAlarmConfigNIDIndex | read-only | mandatory | The object specifies the node id of the node. |
| 1.3.6.1.4.1.321.1.3012.1030.1.2 | ColumnncmAlarmConfigIndex | read-only | mandatory | The index value which uniquely identifies the interface to which this entry is applicable. |
| 1.3.6.1.4.1.321.1.3012.1030.1.3 | ColumnncmAlmCfgDomain | read-write | mandatory | The variable specifies the Domain the alarm came from. |
| 1.3.6.1.4.1.321.1.3012.1030.1.4 | ColumnncmAlmCfgSrcAddr | read-write | mandatory | The variable specifies the Address where the alarm came from. |
| 1.3.6.1.4.1.321.1.3012.1030.1.5 | ColumnncmAlmCfgCard | read-write | mandatory | The variable specifies the card in a specified shelf. |
| 1.3.6.1.4.1.321.1.3012.1030.1.6 | ColumnncmAlmCfgShelf | read-write | mandatory | The variable specifies the particular shelf. |
| 1.3.6.1.4.1.321.1.3012.1030.1.7 | ColumnncmAlmCfgE1T1Port1EnableAlmRpt | read-write | mandatory | The variable Enable/Disable the alarm reporting of the Port #1 for E1/T1 by specifying the bit 0; 1=yes, 0=no. |
| 1.3.6.1.4.1.321.1.3012.1030.1.8 | ColumnncmAlmCfgE1T1Port2EnableAlmRpt | read-write | mandatory | The variable Enable/Disable the alarm reporting of the Port #2 for E1/T1 by specifying the bit 1; 1=yes, 0=no. |
| 1.3.6.1.4.1.321.1.3012.1030.1.9 | ColumnncmAlmCfgE1T1Port3EnableAlmRpt | read-write | mandatory | The variable Enable/Disable the alarm reporting of the Port #3 for E1/T1 by specifying the bit 0; 1=yes, 0=no. |
| 1.3.6.1.4.1.321.1.3012.1030.1.10 | ColumnncmAlmCfgE1T1Port4EnableAlmRpt | read-write | mandatory | The variable Enable/Disable the alarm reporting of the Port #4 for E1/T1 by specifying the bit 1; 1=yes, 0=no. |
| 1.3.6.1.4.1.321.1.3012.1030.1.11 | ColumnncmAlmCfgDataPort1EnableAlmRpt | read-write | mandatory | The variable Enable/Disable the alarm reporting of the Port #1 for ncmData by specifying the bit 0; 1=yes, 0=no. This object has no significance in QUAD cards. |
| 1.3.6.1.4.1.321.1.3012.1030.1.12 | ColumnncmAlmCfgDataPort2EnableAlmRpt | read-write | mandatory | The variable Enable/Disable the alarm reporting of the Port #2 for ncmData by specifying the bit 1; 1=yes, 0=no. This object has no significance in QUAD cards. |
| 1.3.6.1.4.1.321.1.3012.1030.1.13 | ColumnncmAlmCfgEnableCardAlmRpt | read-write | mandatory | The variable Enable/Disable the alarm reporting for this card. |
| 1.3.6.1.4.1.321.1.3012.1030.1.14 | ColumnncmAlmCfgDeclareTime | read-write | mandatory | The variable specifies the alarm declaration time (in seconds). |
| 1.3.6.1.4.1.321.1.3012.1031 | TablencmCURRENTAlarmMsgTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.321.1.3012.1031.1 | RowncmCURRENTAlarmMsgEntry | not-accessible | mandatory | An entry in the Current ncm Alarm Message table. |
| 1.3.6.1.4.1.321.1.3012.1031.1.1 | ColumnncmCurrAlarmMsgNIDIndex | read-only | mandatory | The object specifies the node id of the node. |
| 1.3.6.1.4.1.321.1.3012.1031.1.2 | ColumnncmCurrAlarmMsgIndex | read-only | mandatory | The index value which uniquely identifies the interface to which this entry is applicable. |
| 1.3.6.1.4.1.321.1.3012.1031.1.3 | ColumnncmCurrAlarmMsgNumber | read-only | mandatory | A number between 1 and 15, where 1 is the latest alarm and 15 is the most recent alarm captured inside the data base. |
| 1.3.6.1.4.1.321.1.3012.1031.1.4 | ColumnncmCurrAlarmMsgEquipID | read-only | mandatory | The object specifies the Equipment ID of the card. |
| 1.3.6.1.4.1.321.1.3012.1032 | TablencmPrevAlarmMsgTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.321.1.3012.1032.1 | RowncmPrevAlarmMsgEntry | not-accessible | mandatory | An entry in the Enhanced ncmAlarm Configure table. |
| 1.3.6.1.4.1.321.1.3012.1032.1.1 | ColumnncmPrevAlarmMsgNIDIndex | read-only | mandatory | The object specifies the node id of the node. |
| 1.3.6.1.4.1.321.1.3012.1032.1.2 | ColumnncmPrevAlarmMsgIndex | read-only | mandatory | The index value which uniquely identifies the interface to which this entry is applicable. |
| 1.3.6.1.4.1.321.1.3012.1032.1.3 | ColumnncmPrevAlarmMsgNumber | read-only | mandatory | A number between 1 and 15, where 1 is the latest alarm and 15 is the most recent alarm captured inside the data base. |
| 1.3.6.1.4.1.321.1.3012.1032.1.4 | ColumnncmPrevAlarmMsgTimeStampSec | read-only | mandatory | The variable specifies the Time Stamp in Seconds. |
| 1.3.6.1.4.1.321.1.3012.1032.1.5 | ColumnncmPrevAlarmMsgTimeStampms | read-only | mandatory | The variable specifies the Time Stamp in milli Seconds. |
| 1.3.6.1.4.1.321.1.3012.1032.1.6 | ColumnncmPrevAlarmMsgAlarmCode | read-only | mandatory | The variable specifies the ncm Alarm Code of the card. |
| 1.3.6.1.4.1.321.1.3012.1032.1.7 | ColumnncmPrevAlarmMsgAlarmInstance | read-only | mandatory | The object specifies the ncm Alarm Instance. |
| 1.3.6.1.4.1.321.1.3012.1032.1.8 | ColumnncmPrevAlarmMsgObjType | read-only | mandatory | The variable specifies the Object Type of the ncmAlarm refer. |
| 1.3.6.1.4.1.321.1.3012.1032.1.9 | ColumnncmPrevAlarmMsgSeverity | read-only | mandatory | The variable specifies the severity of the ncm Alarm. |
| 1.3.6.1.4.1.321.1.3012.1033 | TablencmEnhanAlmCfgTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.321.1.3012.1033.1 | RowncmEnhanAlmCfgEntry | not-accessible | mandatory | An entry in the Enhanced ncm Alarm Configure table. |
| 1.3.6.1.4.1.321.1.3012.1033.1.1 | ColumnncmEnhanAlmCfgNIDIndex | read-only | mandatory | The object specifies the node id of the node. |
| 1.3.6.1.4.1.321.1.3012.1033.1.2 | ColumnncmEnhanAlmCfgIndex | read-only | mandatory | The index value which uniquely identifies the interface to which this entry is applicable. |
| 1.3.6.1.4.1.321.1.3012.1033.1.3 | ColumnncmEnhanAlmCfgCRCThreshold | read-write | mandatory | The variable specifies the consecutive CRC error threshold of the port; 0 is to disable this error threshold and 1~31 is to enable also specify a particular va… |
| 1.3.6.1.4.1.321.1.3012.1033.1.4 | ColumnncmEnhanAlmCfgSESThreshold | read-write | mandatory | The variable specifies the severly errored seconds threshold of the port; 0 is to disable this error threshold and 1~100 is to enable also specify a particular… |
| 1.3.6.1.4.1.321.1.3012.1033.1.5 | ColumnncmEnhanAlmCfgUASThreshold | read-write | mandatory | The variable specifies the unavailable seconds threshold of the port; 0 is to disable this error threshold and 1~100 is to enable also specify a particular val… |
| 1.3.6.1.4.1.321.1.3012.1033.1.6 | ColumnncmEnhanAlmCfgBERThreshold | read-write | mandatory | The variable specifies the bit error rate threshold of the port; the value = 10 Exponential to the power minus n. |
| 1.3.6.1.4.1.321.1.3012.1033.1.7 | ColumnncmEnhanAlmCfgBPVThreshold | read-write | mandatory | The object specifies the BPV threshold the port. |
| 1.3.6.1.4.1.321.1.3012.1033.1.8 | ColumnncmEnhanAlmCfgLineRestoral | read-write | mandatory | The variable specifies the Line Restoral mode of the port. |
| 1.3.6.1.4.1.321.1.3012.1033.1.9 | ColumnncmEnhanAlmCfgTODHour | read-write | mandatory | The object specifies the Time of day hour the port; this is the hours to restore line if line restore is TOD. |
| 1.3.6.1.4.1.321.1.3012.1033.1.10 | ColumnncmEnhanAlmCfgTODMinute | read-write | mandatory | The object specifies the Time of day minute the port; this is the minutes to restore line if line restore is TOD. |
| 1.3.6.1.4.1.321.1.3012.1033.1.11 | ColumnncmEnhanAlmCfgLinRestEvalPer | read-write | mandatory | The object specifies the Line Restoral evaulation period (seconds) of the port. |
| 1.3.6.1.4.1.321.1.3012.1034 | TablencmLoopbackTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.321.1.3012.1034.1 | RowncmLoopbackEntry | not-accessible | mandatory | An entry in the Loopback Table. |
| 1.3.6.1.4.1.321.1.3012.1034.1.1 | ColumnncmLpbkNIDIndex | read-only | mandatory | The object specifies the node id of the node. |
| 1.3.6.1.4.1.321.1.3012.1034.1.2 | ColumnncmLpbkLineIndex | read-only | mandatory | The index value which uniquely identifies the interface to which this entry is applicable. |
| 1.3.6.1.4.1.321.1.3012.1034.1.3 | ColumnncmSetAllOnes | read-write | mandatory | The variable Enable/Disable the set all ones loopback option. |
| 1.3.6.1.4.1.321.1.3012.1034.1.4 | ColumnncmTimeoutLOCSec | read-write | mandatory | The object specifies the number of seconds to loop for LOC. 0 for infinite. |
| 1.3.6.1.4.1.321.1.3012.1034.1.5 | ColumnncmRemoteLB | read-write | mandatory | This object specify whether the loopback is remote or local. |
| 1.3.6.1.4.1.321.1.3012.1034.1.6 | ColumnncmActivateDeactLBType | read-write | mandatory | This variable represents the loopback confi- guration of the DS1 interface. Agents support- ing read/write access should return badValue in response to a reque… |
| 1.3.6.1.4.1.321.1.3012.1035 | TablencmTestPatternTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.321.1.3012.1035.1 | RowncmTestPatternEntry | not-accessible | mandatory | An entry in the Test Pattern Table. |
| 1.3.6.1.4.1.321.1.3012.1035.1.1 | ColumnncmTstpattNIDIndex | read-only | mandatory | The object specifies the node id of the node. |
| 1.3.6.1.4.1.321.1.3012.1035.1.2 | ColumnncmTstpattLineIndex | read-only | mandatory | The index value which uniquely identifies the interface to which this entry is applicable. |
| 1.3.6.1.4.1.321.1.3012.1035.1.3 | ColumnncmTstpattTestPeriod | read-write | mandatory | The object specifies the number of seconds to test; 0 for infinite. |
| 1.3.6.1.4.1.321.1.3012.1035.1.4 | ColumnncmStartStopTestPattern | read-write | mandatory | When one of this object is chosen and received by the agent, this test pattern is send to the target platform to start the diagnostic action; while object valu… |
| 1.3.6.1.4.1.321.1.3012.1035.1.5 | ColumnncmResetTestCounter | read-write | mandatory | This object reset the test counter in the diagnostic. |
| 1.3.6.1.4.1.321.1.3012.1036 | TablencmCircuitInfoTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.321.1.3012.1036.1 | RowncmCircuitInfoEntry | not-accessible | mandatory | An entry in the circuitBuilder Table for adding, editing, deleting, activate, deactivate and get the detail information of a particular circuit. |
| 1.3.6.1.4.1.321.1.3012.1036.1.1 | ColumnncmCircuitInfoNIDIndex | read-only | mandatory | This variable indicates the node id value of the node. |
| 1.3.6.1.4.1.321.1.3012.1036.1.2 | ColumnncmCircuitInfoCircName | read-write | mandatory | This object allocates & indicates the circuit name for sending the add/edit/delete/activate/deactivate/get detail info circuit request to the circuitbuilder. |
| 1.3.6.1.4.1.321.1.3012.1036.1.3 | ColumnncmCircuitInfoCircPriority | read-write | mandatory | This object allocates & indicates the circuit priority for sending the add/edit/get detail info circuit request to the circuitbuilder. |
| 1.3.6.1.4.1.321.1.3012.1036.1.4 | ColumnncmCircuitInfoCircType | read-write | mandatory | This object allocates & indicates the circuit type for sending the add/edit/get detail info circuit request to the circuitbuilder. |
| 1.3.6.1.4.1.321.1.3012.1036.1.5 | ColumnncmCircuitInfoCircMode | read-write | mandatory | This object allocates & indicates the circuit mode for sending the add/edit/get detail info circuit request to the circuitbuilder. |
| 1.3.6.1.4.1.321.1.3012.1036.1.6 | ColumnncmCircuitInfoSrcPortSite | read-write | mandatory | This object allocates & indicates the shelf and slot combination of the source port for sending the add/edit/get detail info circuit request to the circuitbuil… |
| 1.3.6.1.4.1.321.1.3012.1036.1.7 | ColumnncmCircuitInfoSrcCardEquipID | read-write | mandatory | This object allocates & indicates the card equipment id of the source port for sending the add/edit/get detail info circuit request to the circuitbuilder. |
| 1.3.6.1.4.1.321.1.3012.1036.1.8 | ColumnncmCircuitInfoSrcPortID | read-write | mandatory | This object allocates & indicates the port identity of the source port for sending the add/edit/get detail info circuit request to the circuitbuilder. |
| 1.3.6.1.4.1.321.1.3012.1036.1.9 | ColumnncmCircuitInfoSrcTimeslotmap | read-write | mandatory | This object allocates & indicates the timeslot map allocated for the source port for sending the add/edit/get detail info circuit request to the circuitbuilder. |
| 1.3.6.1.4.1.321.1.3012.1036.1.10 | ColumnncmCircuitInfoDstPortSite | read-write | mandatory | This object allocates & indicates the shelf and slot combination of the destination port for sending the add/edit/get detail info circuit request to the circui… |
| 1.3.6.1.4.1.321.1.3012.1036.1.11 | ColumnncmCircuitInfoDstCardEquipID | read-write | mandatory | This object allocates & indicates the card equipment id of the destination port for sending the add/edit/get detail info circuit request to the circuitbuilder. |
| 1.3.6.1.4.1.321.1.3012.1036.1.12 | ColumnncmCircuitInfoDstPortID | read-write | mandatory | This object allocates & indicates the port identity of the destination port for sending the add/edit/get detail info circuit request to the circuitbuilder. |
| 1.3.6.1.4.1.321.1.3012.1036.1.13 | ColumnncmCircuitInfoDstTimeslotmap | read-write | mandatory | This object allocates & indicates the timeslot map allocated for the destination port for sending the add/edit/get detail info circuit request to the circuitbu… |
| 1.3.6.1.4.1.321.1.3012.1036.1.14 | ColumnncmCircuitInfoBackPlaneBusID | read-write | mandatory | This object allocates & indicates the backplane bus ID for sending the add/edit/get detail info circuit request to the circuitbuilder. |
| 1.3.6.1.4.1.321.1.3012.1036.1.15 | ColumnncmCircuitInfoAssoCircName | read-write | mandatory | This object allocates & indicates the Assoicate circuit name for sending the add/edit/get detail info circuit request to the circuitbuilder. |
| 1.3.6.1.4.1.321.1.3012.1036.1.16 | ColumnncmCircuitInfoAction | read-write | mandatory | The object send the corresponding acp command to execute the specified circuit action with all necessary parameters setup properly. |
| 1.3.6.1.4.1.321.1.3012.1036.1.17 | ColumnncmAddEditActDeactCircuitStatus | read-only | mandatory | This variable indicates the status as the result of add/edit/Activate/Deactivate circuit. |
| 1.3.6.1.4.1.321.1.3012.1036.1.18 | ColumnncmDeleteCircuitStatus | read-only | mandatory | This variable indicates the status as the result of delete circuit. |
| 1.3.6.1.4.1.321.1.3012.1036.1.19 | ColumnncmGetDetailCircuitStatus | read-only | mandatory | This variable indicates the status of the get circuit detail information. |
| 1.3.6.1.4.1.321.1.3012.1037 | TablencmPortTimeslotAllocTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.321.1.3012.1037.1 | RowncmPortTimeslotAllocEntry | not-accessible | mandatory | An entry in the Port Timeslot Allocation table for ncmCircuit Build. |
| 1.3.6.1.4.1.321.1.3012.1037.1.1 | ColumnncmPortTimeslotAllocNIDIndex | read-only | mandatory | This variable indicates the node id value of the node. |
| 1.3.6.1.4.1.321.1.3012.1037.1.2 | ColumnncmPortTimeslotCardSite | read-write | mandatory | This variable indicates the shelf and slot combination number of the device. |
| 1.3.6.1.4.1.321.1.3012.1037.1.3 | ColumnncmPortTimeslotCardEquipID | read-write | mandatory | This variable indicates the card equipment id of the target. |
| 1.3.6.1.4.1.321.1.3012.1037.1.4 | ColumnncmPortTimeslotPortID | read-write | mandatory | This variable indicates the port identity of the interface. |
| 1.3.6.1.4.1.321.1.3012.1037.1.5 | ColumnncmPortAllocTimeSlotMap | read-only | mandatory | The variable indicates the timeslot map allocated for the port by sending the corresponding acp command to execute the Get Action. |
| 1.3.6.1.4.1.321.1.3012.1038 | TablencmDialBkUpInfoTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.321.1.3012.1038.1 | RowncmDialBkUpInfoEntry | not-accessible | mandatory | An entry in the retrieval of dial-backup parameter table for ncmCircuit Build. |
| 1.3.6.1.4.1.321.1.3012.1038.1.1 | ColumnncmDialBkUpInfoNIDIndex | read-only | mandatory | This variable indicates the node id value of the node. |
| 1.3.6.1.4.1.321.1.3012.1038.1.2 | ColumnncmDialBkUpReqCircName | read-write | mandatory | This variable indicates the circuit name for request dial-backup parameter and retrieve from the circuitbuilder. |
| 1.3.6.1.4.1.321.1.3012.1038.1.3 | ColumnncmPrimaryCircName | read-write | mandatory | This variable indicates the primary circuit name for request and retrieve from the circuitbuilder as a parameter of dial-backup. |
| 1.3.6.1.4.1.321.1.3012.1038.1.4 | ColumnncmBackupCircName | read-write | mandatory | This variable indicates the backup circuit name for request and retrieve from the circuitbuilder as a parameter of dial-backup. |
| 1.3.6.1.4.1.321.1.3012.1038.1.5 | ColumnncmCallReferenceNumber | read-write | mandatory | The variable indicates the call reference number of the dial-backup. |
| 1.3.6.1.4.1.321.1.3012.1038.1.6 | ColumnncmCirSrcPortErrsetupMask | read-write | mandatory | The variable indicates the bitmap to setup the mask for circuit source port error of the dial-backup; ncmAlarm Mask ALM-AIS, ALM-YEL and ALM-LOS are defined fo… |
| 1.3.6.1.4.1.321.1.3012.1038.1.7 | ColumnncmCirDstPortErrsetupMask | read-write | mandatory | The variable indicates the bitmap to setup the mask for circuit destination port error of the dial-backup; ncmAlarm Mask ALM-AIS, ALM-YEL and ALM-LOS are defin… |
| 1.3.6.1.4.1.321.1.3012.1038.1.8 | ColumnncmCirErrClearanceMask | read-write | mandatory | The variable indicates the bitmap to setup the mask for circuit error clearance of the dial-backup; ncmAlarm Mask ALM-AIS, ALM-YEL and ALM-LOS are defined for … |
| 1.3.6.1.4.1.321.1.3012.1038.1.9 | ColumnncmDialBkUpTimeout | read-write | mandatory | The variable indicates the dial-backup timeout. |
| 1.3.6.1.4.1.321.1.3012.1038.1.10 | ColumnncmDialBkUpAction | read-write | mandatory | The object send the corresponding acp command to execute the dial-backup set action. |
| 1.3.6.1.4.1.321.1.3012.1038.1.11 | ColumnncmDialBkUpSetupStatus | read-only | mandatory | This variable indicates the setup status as the result of set dial-backup parameters. |
| 1.3.6.1.4.1.321.1.3012.1039 | TablencmClearCircuitGrpTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.321.1.3012.1039.1 | RowncmClearCircuitGrpEntry | not-accessible | mandatory | An entry in the circuitBuilder Table for clearing any circuit group. |
| 1.3.6.1.4.1.321.1.3012.1039.1.1 | ColumnncmClearCircuitGrpNIDIndex | read-only | mandatory | This variable indicates the node id value of the node. |
| 1.3.6.1.4.1.321.1.3012.1039.1.2 | ColumnncmClearCircuitGrpName | read-write | mandatory | This object allocates the circuit group site for the request. |
| 1.3.6.1.4.1.321.1.3012.1039.1.3 | ColumnncmClearCircuitGrpSite | read-write | mandatory | This object allocates the shelf and slot combination of the port for the request. |
| 1.3.6.1.4.1.321.1.3012.1039.1.4 | ColumnncmClearCircuitCardEquipID | read-write | mandatory | This object allocate the card equipment id for the request. |
| 1.3.6.1.4.1.321.1.3012.1039.1.5 | ColumnncmClearCircuitPortID | read-write | mandatory | This object allocates the port identity for the request. |
| 1.3.6.1.4.1.321.1.3012.1039.1.6 | ColumnncmClearCircuitAction | read-write | mandatory | The object send the corresponding acp command to execute the clear circuit action. |
| 1.3.6.1.4.1.321.1.3012.1040 | TablencmListGetMsgNumTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.321.1.3012.1040.1 | RowncmListGetMsgNumEntry | not-accessible | mandatory | An entry to retrieve circuit list in a particular page of the central ncmCircuit Build ncmDatabase. |
| 1.3.6.1.4.1.321.1.3012.1040.1.1 | ColumnncmListMsgNumNIDIndex | read-only | mandatory | This variable indicates the node id value of the node. |
| 1.3.6.1.4.1.321.1.3012.1040.1.2 | ColumnncmListMsgNumCircuitGroup | read-write | mandatory | ccb-CLIST-ALL: List all circuits in the central circuit database. ccb-CLIST-ACTIVE: List all active circuits in the circuit database. ccb-CLIST-PORT-CKT: List … |
| 1.3.6.1.4.1.321.1.3012.1040.1.3 | ColumnncmListMsgNumPageNumber | read-write | mandatory | The object allocates the page number for the retrival of ncmCircuit List request. |
| 1.3.6.1.4.1.321.1.3012.1040.1.4 | ColumnncmListMsgNumCardSite | read-write | mandatory | This object allocates the shelf and slot combination for the retrival of ncmCircuit List request. |
| 1.3.6.1.4.1.321.1.3012.1040.1.5 | ColumnncmListMsgNumCardEquipID | read-write | mandatory | This object defines the card equipment id of the target. |
| 1.3.6.1.4.1.321.1.3012.1040.1.6 | ColumnncmListMsgNumPortID | read-write | mandatory | This object defines the port identity of the interface. |
| 1.3.6.1.4.1.321.1.3012.1040.1.7 | ColumnncmNumofGetListMessage | read-only | mandatory | This variable indicates number of circuits listed in this message. |
| 1.3.6.1.4.1.321.1.3012.1040.1.8 | ColumnncmTotalCircDatabase | read-only | mandatory | This variable indicates total number of circuits in circuit database. |
| 1.3.6.1.4.1.321.1.3012.1041 | TablencmCircListccbTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.321.1.3012.1041.1 | RowncmCircListccbEntry | not-accessible | mandatory | An entry to retrieve the specified circuit detail information as listed out in the Get List Message Number MIB Group. |
| 1.3.6.1.4.1.321.1.3012.1041.1.1 | ColumnncmListccbNIDIndex | read-only | mandatory | This variable indicates the node id value of the node. |
| 1.3.6.1.4.1.321.1.3012.1041.1.2 | ColumnncmNumofCircListMessage | read-only | mandatory | This variable indicates the number of circuit listed in this page. |
| 1.3.6.1.4.1.321.1.3012.1041.1.3 | ColumnncmListccbCircName | read-only | mandatory | This variable indicates the circuit name response from the circuitbuilder as the circuit identity of the object. |
| 1.3.6.1.4.1.321.1.3012.1041.1.4 | ColumnncmListccbCircPriority | read-only | mandatory | This variable indicates circuit priority of this circuit. |
| 1.3.6.1.4.1.321.1.3012.1041.1.5 | ColumnncmListccbCircType | read-only | mandatory | This variable indicates circuit type of this circuit. |
| 1.3.6.1.4.1.321.1.3012.1041.1.6 | ColumnncmListccbCircMode | read-only | mandatory | This variable indicates circuit mode of this circuit. |
| 1.3.6.1.4.1.321.1.3012.1041.1.7 | ColumnncmSrcPortSite | read-only | mandatory | This variable indicates the shelf and slot combination of the source port. |
| 1.3.6.1.4.1.321.1.3012.1041.1.8 | ColumnncmSrcCardEquipID | read-only | mandatory | This variable indicates the card equipment id of the source port. |
| 1.3.6.1.4.1.321.1.3012.1041.1.9 | ColumnncmSrcPortIdentifier | read-only | mandatory | This variable indicates the port identity of the source port. |
| 1.3.6.1.4.1.321.1.3012.1041.1.10 | ColumnncmSrcTimeslotmap | read-only | mandatory | The variable indicates the timeslot map allocated for the source port. |
| 1.3.6.1.4.1.321.1.3012.1041.1.11 | ColumnncmDstPortSite | read-only | mandatory | This variable indicates the shelf and slot combination of the destination port. |
| 1.3.6.1.4.1.321.1.3012.1041.1.12 | ColumnncmDstCardEquipID | read-only | mandatory | This variable indicates the card equipment id of the destination port. |
| 1.3.6.1.4.1.321.1.3012.1041.1.13 | ColumnncmDstPortIdentifier | read-only | mandatory | This variable indicates the port identity of the destination port. |
| 1.3.6.1.4.1.321.1.3012.1041.1.14 | ColumnncmDstTimeslotmap | read-only | mandatory | The variable indicates the timeslot map allocated for the destination port. |
| 1.3.6.1.4.1.321.1.3012.1041.1.15 | ColumnncmListccbBackPlaneBusID | read-only | mandatory | The variable indicates the backplane bus ID of the device. |
| 1.3.6.1.4.1.321.1.3012.1041.1.16 | ColumnncmListccbCircStatus | read-only | mandatory | This variable indicates the status of the List circuit ccb. |
| 1.3.6.1.4.1.321.1.3012.1042 | TablencmEquipmentIDTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.321.1.3012.1042.1 | RowncmEquipmentIDEntry | not-accessible | mandatory | An entry in the Equipment ID table. |
| 1.3.6.1.4.1.321.1.3012.1042.1.1 | ColumnncmEquipmentIDNIDIndex | read-only | mandatory | This variable specifies the node id. |
| 1.3.6.1.4.1.321.1.3012.1042.1.2 | ColumnncmEquipmentIDLineIndex | read-only | mandatory | This variable specifies the line index value. |
| 1.3.6.1.4.1.321.1.3012.1042.1.3 | ColumnncmFirmwareVersion | read-only | mandatory | The variable specifies the firmware version. |
| 1.3.6.1.4.1.321.1.3012.1042.1.4 | ColumnncmFirmwareRevision | read-only | mandatory | The variable specifies the firmware revision. |
| 1.3.6.1.4.1.321.1.3012.1042.1.5 | ColumnncmEquipmentType | read-only | mandatory | The variable specifies the Equipment Type. |
| 1.3.6.1.4.1.321.1.3012.1042.1.6 | ColumnncmHardwareVersion | read-only | mandatory | The variable specifies the hardware version. |
| 1.3.6.1.4.1.321.1.3012.1042.1.7 | ColumnncmHardwareRevision | read-only | mandatory | The variable specifies the hardwareware revision. |
| 1.3.6.1.4.1.321.1.3012.1042.1.8 | ColumnncmLocationID | read-only | mandatory | The variable specifies the Location ID. |
| 1.3.6.1.4.1.321.1.3012.1043 | TablencmE1AlarmThresholdConfigTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.321.1.3012.1043.1 | RowncmE1AlarmThresholdConfigEntry | not-accessible | mandatory | An entry in the E1 ncmAlarm Threshold Configure table. |
| 1.3.6.1.4.1.321.1.3012.1043.1.1 | ColumnncmE1AlarmThresholdConfigNIDIndex | read-only | mandatory | The object specifies the node id of the node. |
| 1.3.6.1.4.1.321.1.3012.1043.1.2 | ColumnncmE1AlarmThresholdConfigIndex | read-only | mandatory | The index value which uniquely identifies the interface to which this entry is applicable. |
| 1.3.6.1.4.1.321.1.3012.1043.1.3 | ColumnncmE1LOFThreshold | read-write | mandatory | This variable specifies the LOF Threshold count in secs. |
| 1.3.6.1.4.1.321.1.3012.1043.1.4 | ColumnncmE1LOFTimeInterval | read-write | mandatory | This variable specifies the LOF Time Interval in secs. |
| 1.3.6.1.4.1.321.1.3012.1043.1.5 | ColumnncmE1LOSThreshold | read-write | mandatory | This variable specifies the LOS Threshold count in secs. |
| 1.3.6.1.4.1.321.1.3012.1043.1.6 | ColumnncmE1LOSTimeInterval | read-write | mandatory | This variable specifies the LOS Time Interval in secs. |
| 1.3.6.1.4.1.321.1.3012.1043.1.7 | ColumnncmE1RAIThreshold | read-write | mandatory | This variable specifies the RAI Threshold count in secs. |
| 1.3.6.1.4.1.321.1.3012.1043.1.8 | ColumnncmE1RAITimeInterval | read-write | mandatory | This variable specifies the RAI Time Interval in secs. |
| 1.3.6.1.4.1.321.1.3012.1043.1.9 | ColumnncmE1AISThreshold | read-write | mandatory | This variable specifies the AIS Threshold count in secs. |
| 1.3.6.1.4.1.321.1.3012.1043.1.10 | ColumnncmE1AISTimeInterval | read-write | mandatory | This variable specifies the AIS Time Interval in secs. |
| 1.3.6.1.4.1.321.1.3012.1043.1.11 | ColumnncmE1BPVThreshold | read-write | mandatory | This variable specifies the BPV Threshold count in secs. |
| 1.3.6.1.4.1.321.1.3012.1043.1.12 | ColumnncmE1BPVTimeInterval | read-write | mandatory | This variable specifies the BPV Time Interval in secs. |
| 1.3.6.1.4.1.321.1.3012.1043.1.13 | ColumnncmE1ES15MINThreshold | read-write | mandatory | This variable specifies the ES 15 minute Threshold count in secs. |
| 1.3.6.1.4.1.321.1.3012.1043.1.14 | ColumnncmE1ES24HRThreshold | read-write | mandatory | This variable specifies the ES 24 hour Threshold count in secs. |
| 1.3.6.1.4.1.321.1.3012.1043.1.15 | ColumnncmE1SES15MINThreshold | read-write | mandatory | This variable specifies the SES 15 minute Threshold count in secs. |
| 1.3.6.1.4.1.321.1.3012.1043.1.16 | ColumnncmE1SES24HRThreshold | read-write | mandatory | This variable specifies the SES 24 hour Threshold count in secs. |
| 1.3.6.1.4.1.321.1.3012.1043.1.17 | ColumnncmCVP15MINThreshold | read-write | mandatory | This variable specifies the CVP 15 minute Threshold count in secs. |
| 1.3.6.1.4.1.321.1.3012.1043.1.18 | ColumnncmCVP24HRThreshold | read-write | mandatory | This variable specifies the CVP 24 hour Threshold count in secs. |
| 1.3.6.1.4.1.321.1.3012.1043.1.19 | ColumnncmCVL15MINThreshold | read-write | mandatory | This variable specifies the CVL 15 minute Threshold count in secs. |
| 1.3.6.1.4.1.321.1.3012.1043.1.20 | ColumnncmCVL24HRThreshold | read-write | mandatory | This variable specifies the CVL 24 hour Threshold count in secs. |
| 1.3.6.1.4.1.321.1.3012.1043.1.21 | ColumnncmESL15MINThreshold | read-write | mandatory | This variable specifies the ESL 15 minute Threshold count in secs. |
| 1.3.6.1.4.1.321.1.3012.1043.1.22 | ColumnncmESL24HRThreshold | read-write | mandatory | This variable specifies the CVL 24 hour Threshold count in secs. |
| 1.3.6.1.4.1.321.1.3012.1043.1.23 | ColumnncmSESL15MINThreshold | read-write | mandatory | This variable specifies the SESL 15 minute Threshold count in secs. |
| 1.3.6.1.4.1.321.1.3012.1043.1.24 | ColumnncmSESL24HRThreshold | read-write | mandatory | This variable specifies the SESL 24 hour Threshold count in secs. |
| 1.3.6.1.4.1.321.1.3012.1043.1.25 | ColumnncmUASP15MINThreshold | read-write | mandatory | This variable specifies the UASP 15 minute Threshold count in secs. |
| 1.3.6.1.4.1.321.1.3012.1043.1.26 | ColumnncmUASP24HRThreshold | read-write | mandatory | This variable specifies the UASP 24 hour Threshold count in secs. |
| 1.3.6.1.4.1.321.1.3012.1044 | TablencmE1AlarmThresholdStatusTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.321.1.3012.1044.1 | RowncmE1AlarmThresholdStatusEntry | not-accessible | mandatory | An entry in the E1 ncmAlarm Threshold Status table. |
| 1.3.6.1.4.1.321.1.3012.1044.1.1 | ColumnncmE1AlarmThresholdStatusNIDIndex | read-only | mandatory | The object specifies the node id of the node. |
| 1.3.6.1.4.1.321.1.3012.1044.1.2 | ColumnncmE1AlarmThresholdStatusIndex | read-only | mandatory | The index value which uniquely identifies the interface to which this entry is applicable. |
| 1.3.6.1.4.1.321.1.3012.1044.1.3 | ColumnncmLOFExceededE1 | read-only | mandatory | This variable specifies if LOF exceeded or not. |
| 1.3.6.1.4.1.321.1.3012.1044.1.4 | ColumnncmLOSExceededE1 | read-only | mandatory | This variable specifies if LOS exceeded or not. |
| 1.3.6.1.4.1.321.1.3012.1044.1.5 | ColumnncmRAIExceededE1 | read-only | mandatory | This variable specifies if RAI exceeded or not. |
| 1.3.6.1.4.1.321.1.3012.1044.1.6 | ColumnncmAISExceededE1 | read-only | mandatory | This variable specifies if AIS exceeded or not. |
| 1.3.6.1.4.1.321.1.3012.1044.1.7 | ColumnncmBPVExceededE1 | read-only | mandatory | This variable specifies if BPV exceeded or not. |
| 1.3.6.1.4.1.321.1.3012.1044.1.8 | ColumnncmES15MINExceeded | read-only | mandatory | This variable specifies if ES 15 minute exceeded or not. |
| 1.3.6.1.4.1.321.1.3012.1044.1.9 | ColumnncmES24HRExceeded | read-only | mandatory | This variable specifies if ES 24 Hour exceeded or not. |
| 1.3.6.1.4.1.321.1.3012.1044.1.10 | ColumnncmSES15MINExceeded | read-only | mandatory | This variable specifies if SES 15 minute exceeded or not. |
| 1.3.6.1.4.1.321.1.3012.1044.1.11 | ColumnncmSES24HRExceeded | read-only | mandatory | This variable specifies if SES 24 Hour exceeded or not. |
| 1.3.6.1.4.1.321.1.3012.1044.1.12 | ColumnncmCVP15MINExceeded | read-only | mandatory | This variable specifies if CVP 15 minute exceeded or not. |
| 1.3.6.1.4.1.321.1.3012.1044.1.13 | ColumnncmCVP24HRExceeded | read-only | mandatory | This variable specifies if CVP 24 Hour exceeded or not. |
| 1.3.6.1.4.1.321.1.3012.1044.1.14 | ColumnncmCVL15MINExceeded | read-only | mandatory | This variable specifies if CVL 15 minute exceeded or not. |
| 1.3.6.1.4.1.321.1.3012.1044.1.15 | ColumnncmCVL24HRExceeded | read-only | mandatory | This variable specifies if CVL 24 Hour exceeded or not. |
| 1.3.6.1.4.1.321.1.3012.1044.1.16 | ColumnncmESL15MINExceeded | read-only | mandatory | This variable specifies if ESL 15 minute exceeded or not. |
| 1.3.6.1.4.1.321.1.3012.1044.1.17 | ColumnncmESL24HRExceeded | read-only | mandatory | This variable specifies if ESL 24 Hour exceeded or not. |
| 1.3.6.1.4.1.321.1.3012.1044.1.18 | ColumnncmSESL15MINExceeded | read-only | mandatory | This variable specifies if SESL 15 minute exceeded or not. |
| 1.3.6.1.4.1.321.1.3012.1044.1.19 | ColumnncmSESL24HRExceeded | read-only | mandatory | This variable specifies if SESL 24 Hour exceeded or not. |
| 1.3.6.1.4.1.321.1.3012.1044.1.20 | ColumnncmUASP15MINExceeded | read-only | mandatory | This variable specifies if UASP 15 minute exceeded or not. |
| 1.3.6.1.4.1.321.1.3012.1044.1.21 | ColumnncmUASP24HRExceeded | read-only | mandatory | This variable specifies if UASP 24 Hour exceeded or not. |
| 1.3.6.1.4.1.321.1.3012.1044.1.22 | ColumnncmLOFThresholdCount | read-only | mandatory | This variable specifies the LOF Threshold Count in seconds. |
| 1.3.6.1.4.1.321.1.3012.1044.1.23 | ColumnncmLOFTimeIntervals | read-only | mandatory | This variable specifies the LOF Time Intervals in seconds. |
| 1.3.6.1.4.1.321.1.3012.1044.1.24 | ColumnncmLOSThresholdCount | read-only | mandatory | This variable specifies the LOS Threshold Count in seconds. |
| 1.3.6.1.4.1.321.1.3012.1044.1.25 | ColumnncmLOSTimeIntervals | read-only | mandatory | This variable specifies the LOS Time Intervals in seconds. |
| 1.3.6.1.4.1.321.1.3012.1044.1.26 | ColumnncmRAIThresholdCount | read-only | mandatory | This variable specifies the RAI Threshold Count in seconds. |
| 1.3.6.1.4.1.321.1.3012.1044.1.27 | ColumnncmRAITimeIntervals | read-only | mandatory | This variable specifies the RAI Time Intervals in seconds. |
| 1.3.6.1.4.1.321.1.3012.1044.1.28 | ColumnncmAISThresholdCount | read-only | mandatory | This variable specifies the AIS Threshold Count in seconds. |
| 1.3.6.1.4.1.321.1.3012.1044.1.29 | ColumnncmAISTimeIntervals | read-only | mandatory | This variable specifies the AIS Time Intervals in seconds. |
| 1.3.6.1.4.1.321.1.3012.1044.1.30 | ColumnncmBPVThresholdCount | read-only | mandatory | This variable specifies the BPV Threshold Count in seconds. |
| 1.3.6.1.4.1.321.1.3012.1044.1.31 | ColumnncmBPVTimeIntervals | read-only | mandatory | This variable specifies the BPV Time Intervals in seconds. |
| 1.3.6.1.4.1.321.1.3012.1044.1.32 | ColumnncmES15MINThresholdCount | read-only | mandatory | This variable specifies the ES 15MIN Threshold Count in seconds. |
| 1.3.6.1.4.1.321.1.3012.1044.1.33 | ColumnncmES24HRThresholdCount | read-only | mandatory | This variable specifies the ES 24HR Threshold Count in seconds. |
| 1.3.6.1.4.1.321.1.3012.1044.1.34 | ColumnncmSES15MINThresholdCount | read-only | mandatory | This variable specifies the SES 15MIN Threshold Count in seconds. |
| 1.3.6.1.4.1.321.1.3012.1044.1.35 | ColumnncmSES24HRThresholdCount | read-only | mandatory | This variable specifies the SES 24 HR Threshold Count in seconds. |
| 1.3.6.1.4.1.321.1.3012.1044.1.36 | ColumnncmCVP15MINThresholdCount | read-only | mandatory | This variable specifies the CVP 15MIN Threshold Count in seconds. |
| 1.3.6.1.4.1.321.1.3012.1044.1.37 | ColumnncmCVP24HRThresholdCount | read-only | mandatory | This variable specifies the CVP 24 HR Threshold Count in seconds. |
| 1.3.6.1.4.1.321.1.3012.1044.1.38 | ColumnncmCVL15MINThresholdCount | read-only | mandatory | This variable specifies the CVL 15MIN Threshold Count in seconds. |
| 1.3.6.1.4.1.321.1.3012.1044.1.39 | ColumnncmCVL24HRThresholdCount | read-only | mandatory | This variable specifies the CVL 24 HR Threshold Count in seconds. |
| 1.3.6.1.4.1.321.1.3012.1044.1.40 | ColumnncmESL15MINThresholdCount | read-only | mandatory | This variable specifies the ESL 15MIN Threshold Count in seconds. |
| 1.3.6.1.4.1.321.1.3012.1044.1.41 | ColumnncmESL24HRThresholdCount | read-only | mandatory | This variable specifies the ESL 24 HR Threshold Count in seconds. |
| 1.3.6.1.4.1.321.1.3012.1044.1.42 | ColumnncmSESL15MINThresholdCount | read-only | mandatory | This variable specifies the SESL 15MIN Threshold Count in seconds. |
| 1.3.6.1.4.1.321.1.3012.1044.1.43 | ColumnncmSESL24HRThresholdCount | read-only | mandatory | This variable specifies the SESL 24 HR Threshold Count in seconds. |
| 1.3.6.1.4.1.321.1.3012.1044.1.44 | ColumnncmUASP15MINThresholdCount | read-only | mandatory | This variable specifies the UASP 15MIN Threshold Count in seconds. |
| 1.3.6.1.4.1.321.1.3012.1044.1.45 | ColumnncmUASP24HRThresholdCount | read-only | mandatory | This variable specifies the UASP 24 HR Threshold Count in seconds. |
| 1.3.6.1.4.1.321.1.3012.1045 | TablencmAlarmThresholdConfigTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.321.1.3012.1045.1 | RowncmAlarmThresholdConfigEntry | not-accessible | mandatory | An entry in the ncmAlarm Threshold Configure table. |
| 1.3.6.1.4.1.321.1.3012.1045.1.1 | ColumnncmAlarmThresholdConfigNIDIndex | read-only | mandatory | The object specifies the node id of the node. |
| 1.3.6.1.4.1.321.1.3012.1045.1.2 | ColumnncmAlarmThresholdConfigIndex | read-only | mandatory | The index value which uniquely identifies the interface to which this entry is applicable. |
| 1.3.6.1.4.1.321.1.3012.1045.1.3 | ColumnncmLOFThreshold | read-write | mandatory | This variable the LOF Threshold count is seconds (1-86,400). |
| 1.3.6.1.4.1.321.1.3012.1045.1.4 | ColumnncmLOFTimeInterval | read-write | mandatory | This variable specifies the LOF Time Interval is seconds (1-86,400). |
| 1.3.6.1.4.1.321.1.3012.1045.1.5 | ColumnncmLOSThreshold | read-write | mandatory | This variable specifies the LOS Threshold count is seconds (1-86,400). |
| 1.3.6.1.4.1.321.1.3012.1045.1.6 | ColumnncmLOSTimeInterval | read-write | mandatory | This variable specifies the LOS Time Interval is seconds (1-86,400). |
| 1.3.6.1.4.1.321.1.3012.1045.1.7 | ColumnncmRAIThreshold | read-write | mandatory | This variable specifies the RAI Threshold count is seconds (1-86,400). |
| 1.3.6.1.4.1.321.1.3012.1045.1.8 | ColumnncmRAITimeInterval | read-write | mandatory | This variable specifies the RAI Time Interval is seconds (1-86,400). |
| 1.3.6.1.4.1.321.1.3012.1045.1.9 | ColumnncmAISThreshold | read-write | mandatory | This variable specifies the AIS Threshold count is seconds (1-86,400). |
| 1.3.6.1.4.1.321.1.3012.1045.1.10 | ColumnncmAISTimeInterval | read-write | mandatory | This variable specifies the AIS Time Interval is seconds (1-86,400). |
| 1.3.6.1.4.1.321.1.3012.1045.1.11 | ColumnncmBPVThreshold | read-write | mandatory | This variable specifies the BPV Threshold count is seconds (1-86,400). |
| 1.3.6.1.4.1.321.1.3012.1045.1.12 | ColumnncmBPVTimeInterval | read-write | mandatory | This variable specifies the BPV Time Interval is seconds (1-86,400). |
| 1.3.6.1.4.1.321.1.3012.1045.1.13 | ColumnncmES15MINThreshold | read-write | mandatory | This variable specifies the ES 15 minute Threshold count is seconds (1-86,400). |
| 1.3.6.1.4.1.321.1.3012.1045.1.14 | ColumnncmES24HRThreshold | read-write | mandatory | This variable specifies the ES 24 hour Threshold count in seconds (1-86,400). |
| 1.3.6.1.4.1.321.1.3012.1045.1.15 | ColumnncmSES15MINThreshold | read-write | mandatory | This variable specifies the SES 15 minute Threshold count is seconds (1-86,400). |
| 1.3.6.1.4.1.321.1.3012.1045.1.16 | ColumnncmSES24HRThreshold | read-write | mandatory | This variable specifies the SES 24 hour Threshold count in seconds (1-86,400). |
| 1.3.6.1.4.1.321.1.3012.1046 | TablencmAlarmThresholdStatusTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.321.1.3012.1046.1 | RowncmAlarmThresholdStatusEntry | not-accessible | mandatory | An entry in the ncmAlarm Threshold Status table. |
| 1.3.6.1.4.1.321.1.3012.1046.1.1 | ColumnncmAlarmThresholdStatusNIDIndex | read-only | mandatory | The object specifies the node id of the node. |
| 1.3.6.1.4.1.321.1.3012.1046.1.2 | ColumnncmAlarmThresholdStatusIndex | read-only | mandatory | The index value which uniquely identifies the interface to which this entry is applicable. |
| 1.3.6.1.4.1.321.1.3012.1046.1.3 | ColumnncmLOFExceeded | read-only | mandatory | This variable specifies if LOF exceeded or not. |
| 1.3.6.1.4.1.321.1.3012.1046.1.4 | ColumnncmLOSExceeded | read-only | mandatory | This variable specifies if LOS exceeded or not. |
| 1.3.6.1.4.1.321.1.3012.1046.1.5 | ColumnncmAISExceeded | read-only | mandatory | This variable specifies if AIS exceeded or not. |
| 1.3.6.1.4.1.321.1.3012.1046.1.6 | ColumnncmRAIExceeded | read-only | mandatory | This variable specifies if RAI exceeded or not. |
| 1.3.6.1.4.1.321.1.3012.1046.1.7 | ColumnncmBPVExceeded | read-only | mandatory | This variable specifies if BPV exceeded or not. |
| 1.3.6.1.4.1.321.1.3012.1046.1.8 | ColumnncmESExceeded | read-only | mandatory | This variable specifies if ES exceeded or not. |
| 1.3.6.1.4.1.321.1.3012.1046.1.9 | ColumnncmSESExceeded | read-only | mandatory | This variable specifies if SES exceeded or not. |
| 1.3.6.1.4.1.321.1.3012.1046.1.10 | ColumnncmLOFThresholdCountst | read-only | mandatory | This variable specifies the LOF Threshold Count in seconds. |
| 1.3.6.1.4.1.321.1.3012.1046.1.11 | ColumnncmLOFTimeIntervalst | read-only | mandatory | This variable specifies the LOF Time Intervals in seconds. |
| 1.3.6.1.4.1.321.1.3012.1046.1.12 | ColumnncmLOSThresholdCountst | read-only | mandatory | This variable specifies the LOS Threshold Count in seconds. |
| 1.3.6.1.4.1.321.1.3012.1046.1.13 | ColumnncmLOSTimeIntervalst | read-only | mandatory | This variable specifies the LOS Time Intervals in seconds. |
| 1.3.6.1.4.1.321.1.3012.1046.1.14 | ColumnncmRAIThresholdCountst | read-only | mandatory | This variable specifies the RAI Threshold Count in seconds. |
| 1.3.6.1.4.1.321.1.3012.1046.1.15 | ColumnncmRAITimeIntervalst | read-only | mandatory | This variable specifies the RAI Time Intervals in seconds. |
| 1.3.6.1.4.1.321.1.3012.1046.1.16 | ColumnncmAISThresholdCountst | read-only | mandatory | This variable specifies the AIS Threshold Count in seconds. |
| 1.3.6.1.4.1.321.1.3012.1046.1.17 | ColumnncmAISTimeIntervalst | read-only | mandatory | This variable specifies the AIS Time Intervals in seconds. |
| 1.3.6.1.4.1.321.1.3012.1046.1.18 | ColumnncmBPVThresholdCountst | read-only | mandatory | This variable specifies the BPV Threshold Count in seconds. |
| 1.3.6.1.4.1.321.1.3012.1046.1.19 | ColumnncmBPVTimeIntervalst | read-only | mandatory | This variable specifies the BPV Time Intervals in seconds. |
| 1.3.6.1.4.1.321.1.3012.1046.1.20 | ColumnncmES15MINThresholdCountst | read-only | mandatory | This variable specifies the ES 15 minute Threshold Count in seconds. |
| 1.3.6.1.4.1.321.1.3012.1046.1.21 | ColumnncmES24HRThresholdCountst | read-only | mandatory | This variable specifies the ES 24 Hour Count in seconds. |
| 1.3.6.1.4.1.321.1.3012.1046.1.22 | ColumnncmSES15MINThresholdCountst | read-only | mandatory | This variable specifies the SES 15 minute Threshold Count in seconds. |
| 1.3.6.1.4.1.321.1.3012.1046.1.23 | ColumnncmSES24HRThresholdCountst | read-only | mandatory | This variable specifies the SES 24 hour Count in seconds. |
| 1.3.6.1.4.1.321.1.3012.1046.1.24 | ColumnncmResetAlmThresholdCount | read-write | mandatory | This object reset the alarm threshold counter. |
| 1.3.6.1.4.1.321.1.3012.1050 | TablencmShelfSyncSourceSegTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.321.1.3012.1050.1 | RowncmShelfSyncSourceSegEntry | not-accessible | mandatory | An entry in the ncm Shelf Sync Source Segment Time table. |
| 1.3.6.1.4.1.321.1.3012.1050.1.1 | ColumnncmShelfSyncSegNIDIndex | read-only | mandatory | This variable indicates the node id value of the node. |
| 1.3.6.1.4.1.321.1.3012.1050.1.2 | ColumnncmShelfSyncSourceSegIndex | read-only | mandatory | This object is the identifier of an Interface on a managed device. If there is an ifEntry that is directly associated with this and only this DS1 interface, it… |
| 1.3.6.1.4.1.321.1.3012.1050.1.3 | ColumnncmShelfSyncSourceSegNum | read-only | mandatory | This variable indicates the segment index. |
| 1.3.6.1.4.1.321.1.3012.1050.1.4 | ColumnncmShelfTypeSeg | read-only | mandatory | This variable indicates the shelf hardware type. |
| 1.3.6.1.4.1.321.1.3012.1050.1.5 | ColumnncmRefBusSeg | read-write | mandatory | This variable indicates the reference bus of the segment. |
| 1.3.6.1.4.1.321.1.3012.1050.1.6 | ColumnncmSourceSegOneShelfNum | read-write | mandatory | This variable indicates the source one shelf number of the segment. |
| 1.3.6.1.4.1.321.1.3012.1050.1.7 | ColumnncmSourceSegOneCardNum | read-write | mandatory | This variable indicates the source one card number of the segment. |
| 1.3.6.1.4.1.321.1.3012.1050.1.8 | ColumnncmSourceSegOneClockRef | read-write | mandatory | This variable indicates the source one clock reference of the segment. |
| 1.3.6.1.4.1.321.1.3012.1050.1.9 | ColumnncmSourceSegAutoRestore1 | read-write | mandatory | This variable indicates the source one auto restore of the segment. |
| 1.3.6.1.4.1.321.1.3012.1050.1.10 | ColumnncmSourceSegTwoShelfNum | read-write | mandatory | This variable indicates the source two shelf number of the segment. |
| 1.3.6.1.4.1.321.1.3012.1050.1.11 | ColumnncmSourceSegTwoCardNum | read-write | mandatory | This variable indicates the source two card number of the segment. |
| 1.3.6.1.4.1.321.1.3012.1050.1.12 | ColumnncmSourceSegTwoClockRef | read-write | mandatory | This variable indicates the source two clock reference of the segment. |
| 1.3.6.1.4.1.321.1.3012.1050.1.13 | ColumnncmSourceSegAutoRestore2 | read-write | mandatory | This variable indicates the source two auto restore of the segment. |
| 1.3.6.1.4.1.321.1.3012.1050.1.14 | ColumnncmSourceSegThreeShelfNum | read-write | mandatory | This variable indicates the source three shelf number of the segment. |
| 1.3.6.1.4.1.321.1.3012.1050.1.15 | ColumnncmSourceSegThreeCardNum | read-write | mandatory | This variable indicates the source three card number of the segment. |
| 1.3.6.1.4.1.321.1.3012.1050.1.16 | ColumnncmSourceSegThreeClockRef | read-write | mandatory | This variable indicates the source three clock reference of the segment. |
| 1.3.6.1.4.1.321.1.3012.1050.1.17 | ColumnncmSourceSegAutoRestore3 | read-write | mandatory | This variable indicates the source three auto restore of the segment. |
| 1.3.6.1.4.1.321.1.3012.1050.1.18 | ColumnncmShelfCurrentSyncSourceSeg | read-write | mandatory | This variable indicates the current sync source of the segment. |