VERILINK-ENTERPRISE-NCMIDCSU-MIB
84 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.321.1.3027.10000 | TablencmidcsuConfigTable | not-accessible | mandatory | The ncm idcsu configuration table. |
| 1.3.6.1.4.1.321.1.3027.10000.1 | RowncmidcsuConfigEntry | not-accessible | mandatory | An entry in the ncmidcsu configuration table. |
| 1.3.6.1.4.1.321.1.3027.10000.1.1 | ColumnncmidcsucfgNIDIndex | read-only | mandatory | This variable indicates the node id value of the node. |
| 1.3.6.1.4.1.321.1.3027.10000.1.2 | ColumnncmidcsuLineIndex | read-only | mandatory | |
| 1.3.6.1.4.1.321.1.3027.10000.1.3 | ColumnncmidcsuNetLineBuildOut | read-write | mandatory | The ncmidcsu net line build out. |
| 1.3.6.1.4.1.321.1.3027.10000.1.4 | ColumnncmidcsuNetworkKeepAlive | read-write | mandatory | The ncmidcsu network keep alive varaible . |
| 1.3.6.1.4.1.321.1.3027.10000.1.5 | ColumnncmidcsuExcessiveError | read-write | mandatory | The Net/Eq has excessive errors. |
| 1.3.6.1.4.1.321.1.3027.10000.1.6 | ColumnncmidcsuOutOfFrame | read-write | mandatory | The ncmidcsu Eq is out of frame (OOF). |
| 1.3.6.1.4.1.321.1.3027.10000.1.7 | ColumnncmidcsuFormat | read-write | mandatory | The ncmidcsu Net/Eq format. |
| 1.3.6.1.4.1.321.1.3027.10000.1.8 | ColumnncmidcsuNetDensityEnforcement | read-write | mandatory | The ncmidcsu net density enforcement. |
| 1.3.6.1.4.1.321.1.3027.10000.1.9 | ColumnncmidcsuNetLossOfSignal | read-only | mandatory | The ncmidcsu Net/Eq uas interval. |
| 1.3.6.1.4.1.321.1.3027.10000.1.10 | ColumnncmidcsuJitterBuf | read-write | mandatory | The ncmidcsu Net/Eq Jitter buffer in bits. |
| 1.3.6.1.4.1.321.1.3027.10000.1.11 | ColumnncmidcsuTestSigCfgEnable | read-write | mandatory | bit 1 of MSGOUT+47 for read or of MSGIN+47 for write is test signal enable in this test signal configuration message. |
| 1.3.6.1.4.1.321.1.3027.10000.1.12 | ColumnncmidcsuTestSigCfgFrameSignal | read-write | mandatory | bit 7 of MSGOUT+47 for read or of MSGIN+47 for write is frame test signal in this test signal configuration message. |
| 1.3.6.1.4.1.321.1.3027.10000.1.13 | ColumnncmidcsuCfgRptSendPRM | read-write | mandatory | bit 0 of MSGOUT+52 for read or MSGIN+52 for write is send prm in this configure report message. |
| 1.3.6.1.4.1.321.1.3027.10000.1.14 | ColumnncmidcsuCfgRptPollFarEnd | read-write | mandatory | bit 1 of MSGOUT+52 for read or MSGIN+52 for write is poll far end in this configure report message. |
| 1.3.6.1.4.1.321.1.3027.10000.1.15 | ColumnncmidcsuCfgRptDataLinkUnsolicit | read-write | mandatory | bit 2 of MSGOUT+52 for read or MSGIN+52 for write is data link unsolicited report in this configure report message. |
| 1.3.6.1.4.1.321.1.3027.10000.1.16 | ColumnncmidcsuCfgRptAlmReporting | read-write | mandatory | bit 3 of MSGOUT+52 for read or MSGIN+52 for write is alarm reporting in this configure report message. |
| 1.3.6.1.4.1.321.1.3027.10000.1.17 | ColumnncmidcsuCfgRptPRMType | read-write | mandatory | bit 4,5 of MSGOUT+52 for read or of MSGIN+52 for write is PRM type in this configure report message. |
| 1.3.6.1.4.1.321.1.3027.10000.1.18 | ColumnncmidcsuCfgCodeRegenCRC | read-write | mandatory | bit 0,1 of MSGOUT+53 for read or MSGIN+53 for write is regenerate crc from net to dte or eq to net in this configure coding message. |
| 1.3.6.1.4.1.321.1.3027.10000.1.19 | ColumnncmidcsuCfgCodeXYellowAlarm | read-write | mandatory | bit 2,3 of MSGOUT+53 for read or MSGIN+53 for write is transcode yellow alarm from net to dte or eq to net in this configure coding message. |
| 1.3.6.1.4.1.321.1.3027.10000.1.20 | ColumnncmidcsuCfgCodeEQFIFO | read-write | mandatory | bit 4 of MSGOUT+53 for read or MSGIN+53 for write is eq fifo in this configure coding message. |
| 1.3.6.1.4.1.321.1.3027.10000.1.21 | ColumnncmidcsuCfgCodeNETFIFO | read-write | mandatory | bit 5 of MSGOUT+53 for read or MSGIN+53 for write is net fifo in this configure coding message. |
| 1.3.6.1.4.1.321.1.3027.10000.1.22 | ColumnncmidcsuCfgCodeTranMode | read-write | mandatory | bit 6 of MSGOUT+53 for read or MSGIN+53 for write is transparent mode in this configure report message. |
| 1.3.6.1.4.1.321.1.3027.10000.1.23 | ColumnncmidcsuCfgCodeSend1sLnkIdle | read-write | mandatory | bit 7 of MSGOUT+53 for read or MSGIN+53 for write is send ones data link idle code in this configure report message. |
| 1.3.6.1.4.1.321.1.3027.10000.1.24 | ColumnncmidcsuCfgAlmSelfTest | read-write | mandatory | bit 0 of MSGOUT+54 for read or MSGIN+54 for write is enable power up self test in this configure alarm message. |
| 1.3.6.1.4.1.321.1.3027.10000.1.25 | ColumnncmidcsuCfgAlmEnableTestState | read-write | mandatory | bit 1 of MSGOUT+54 for read or MSGIN+54 for write is enable alarms in test state in this configure alarm message. |
| 1.3.6.1.4.1.321.1.3027.10000.1.26 | ColumnncmidcsuCfgAlmUnframedMode | read-write | mandatory | bit 2 of MSGOUT+54 for read or MSGIN+54 for write is alarms in unframe mode in this configure alarm message. |
| 1.3.6.1.4.1.321.1.3027.10000.1.27 | ColumnncmidcsuCfgAlmOnEqLoop | read-write | mandatory | bit 3 of MSGOUT+54 for read or MSGIN+54 for write is alarm on eq loop loop in this configure alarm message. |
| 1.3.6.1.4.1.321.1.3027.10000.1.28 | ColumnncmidcsuCfgAlmOnNetLoop | read-write | mandatory | bit 4 of MSGOUT+54 for read or MSGIN+54 for write is alarm on net loop in this configure alarm message. |
| 1.3.6.1.4.1.321.1.3027.10000.1.29 | ColumnncmidcsuCfgAlmOnPowerUpLoop | read-write | mandatory | bit 5 of MSGOUT+54 for read or MSGIN+54 for write is alarm power up loop in this configure alarm message. |
| 1.3.6.1.4.1.321.1.3027.10000.1.30 | ColumnncmidcsuCfgLoopRespLLB | read-write | mandatory | bit 0 of MSGOUT+55 for read or MSGIN+55 for respond to LLB in this configure Loop Response Message. |
| 1.3.6.1.4.1.321.1.3027.10000.1.31 | ColumnncmidcsuCfgLoopRespPLB | read-write | mandatory | bit 1 of MSGOUT+55 for read or MSGIN+55 for respond to PLB in this configure Loop Response Message. |
| 1.3.6.1.4.1.321.1.3027.10000.1.32 | ColumnncmidcsuCfgLoopRespELB | read-write | mandatory | bit 2 of MSGOUT+55 for read or MSGIN+55 for respond to ELB in this configure Loop Response Message. |
| 1.3.6.1.4.1.321.1.3027.10000.1.33 | ColumnncmidcsuCfgLoopRespRLB | read-write | mandatory | bit 3 of MSGOUT+55 for read or MSGIN+55 for respond to RLB in this configure Loop Response Message. |
| 1.3.6.1.4.1.321.1.3027.10000.1.34 | ColumnncmidcsuCfgLoopRespLLBTONE | read-write | mandatory | bit 4 of MSGOUT+55 for read or MSGIN+55 for respond to LLB (T1.403) in this configure Loop Response Message. |
| 1.3.6.1.4.1.321.1.3027.10000.1.35 | ColumnncmidcsuCfgLoopRespPLBTONE | read-write | mandatory | bit 5 of MSGOUT+55 for read or MSGIN+55 for respond to PLB (T1.403) in this configure Loop Response Message. |
| 1.3.6.1.4.1.321.1.3027.10000.1.36 | ColumnncmidcsuCfgSendReceiveInBandCode | read-write | mandatory | bit 6 of MSGOUT+55 for read or MSGIN+55 for enable to Send/Receive of in-band code. |
| 1.3.6.1.4.1.321.1.3027.10001 | TablencmidcsuThresholdIntervalTable | not-accessible | mandatory | The ncm idcsu threshold interval table. |
| 1.3.6.1.4.1.321.1.3027.10001.1 | RowncmidcsuThresholdIntervalEntry | not-accessible | mandatory | An entry in the ncmidcsu threshold interval table. |
| 1.3.6.1.4.1.321.1.3027.10001.1.1 | ColumnncmidcsuThresholdNIDIndex | read-only | mandatory | This variable indicates the node id value of the node. |
| 1.3.6.1.4.1.321.1.3027.10001.1.2 | ColumnncmidcsuThresholdIntervalIndex | read-only | mandatory | |
| 1.3.6.1.4.1.321.1.3027.10001.1.3 | ColumnncmidcsuBERThreshold | read-write | mandatory | The ncmidcsu Net/Eq ber threshold. |
| 1.3.6.1.4.1.321.1.3027.10001.1.4 | ColumnncmidcsubpvSecThreshold | read-write | mandatory | The ncmidcsu Net/Eq bpv sec threshold. |
| 1.3.6.1.4.1.321.1.3027.10001.1.5 | ColumnncmidcsubpvSecInterval | read-write | mandatory | The ncmidcsu Net/Eq bpv sec interval. |
| 1.3.6.1.4.1.321.1.3027.10001.1.6 | ColumnncmidcsuESThreshold | read-write | mandatory | The ncmidcsu Net/Eq es threshold. |
| 1.3.6.1.4.1.321.1.3027.10001.1.7 | ColumnncmidcsuESInterval | read-write | mandatory | The ncmidcsu Net/Eq es interval. |
| 1.3.6.1.4.1.321.1.3027.10001.1.8 | ColumnncmidcsuUASThreshold | read-write | mandatory | The ncmidcsu Net/Eq uas threshold. |
| 1.3.6.1.4.1.321.1.3027.10001.1.9 | ColumnncmidcsuUASInterval | read-write | mandatory | The ncmidcsu Net/Eq uas interval. |
| 1.3.6.1.4.1.321.1.3027.10002 | TablencmidcsuConfigOneTable | not-accessible | mandatory | The ncm idcsu configuration table1. |
| 1.3.6.1.4.1.321.1.3027.10002.1 | RowncmidcsuConfigOneEntry | not-accessible | mandatory | An entry in the ncmidcsu configuration table1. |
| 1.3.6.1.4.1.321.1.3027.10002.1.1 | Columnncmidcsucfg1NIDIndex | read-only | mandatory | This variable indicates the node id value of the node. |
| 1.3.6.1.4.1.321.1.3027.10002.1.2 | ColumnncmidcsuLineIndex1 | read-only | mandatory | |
| 1.3.6.1.4.1.321.1.3027.10002.1.3 | ColumnncmidcsuDS0Channel | read-write | mandatory | This variable indicates the channel assignment for the dsu for the port. |
| 1.3.6.1.4.1.321.1.3027.10002.1.4 | ColumnncmidcsuRLBTimeoutIndex | read-write | mandatory | The ncmidcsu rlb timeout index. |
| 1.3.6.1.4.1.321.1.3027.10002.1.5 | ColumnncmidcsuNetLofcIndexTime | read-write | mandatory | The net lofc index time . |
| 1.3.6.1.4.1.321.1.3027.10002.1.6 | ColumnncmidcsuTiming | read-write | mandatory | The ncmidcsu timing. |
| 1.3.6.1.4.1.321.1.3027.10002.1.7 | ColumnncmidcsuLineCode | read-write | mandatory | The ncmidcsu net/eq Line Code. |
| 1.3.6.1.4.1.321.1.3027.10002.1.8 | ColumnncmidcsuMode | read-write | mandatory | The ncmidcsu data transmission mode for the DS-0s channel. |
| 1.3.6.1.4.1.321.1.3027.10002.1.9 | ColumnncmidcsuClock | read-write | mandatory | The ncmidcsu clock for the data port. |
| 1.3.6.1.4.1.321.1.3027.10002.1.10 | ColumnncmidcsuScramble | read-write | mandatory | The ncmidcsu data scrambling option . |
| 1.3.6.1.4.1.321.1.3027.10002.1.11 | ColumnncmidcsuLosLead | read-write | mandatory | This variable indicates the DTE lead bits for port. The DTE leads can be set by setting the relevant bit to 1 and reset by setting the relevant bit to zero. Bi… |
| 1.3.6.1.4.1.321.1.3027.10002.1.12 | ColumnncmidcsuPortLoopEnable | read-write | mandatory | The Port Loop Enable of the dsu of idscsu . |
| 1.3.6.1.4.1.321.1.3027.10002.1.13 | ColumnncmidcsuDataInvert | read-write | mandatory | This variable specifies the data invert for idscsu . |
| 1.3.6.1.4.1.321.1.3027.10002.1.14 | ColumnncmidcsuTimingUnit | read-write | mandatory | This variable specifies if the DSU port is configured as timing unit for idscsu . |
| 1.3.6.1.4.1.321.1.3027.10002.1.15 | ColumnncmidcsuAlarmReporting | read-write | mandatory | This variable specifies if the DSU port has to report Alarm to the SAM for ncmidcsu. |
| 1.3.6.1.4.1.321.1.3027.10003 | TablencmidcsuDiagnosticTable | not-accessible | mandatory | The ncm idcsu diagnostic table. |
| 1.3.6.1.4.1.321.1.3027.10003.1 | RowncmidcsuDiagnosticEntry | not-accessible | mandatory | An entry in the ncmidcsu diagnostic table. |
| 1.3.6.1.4.1.321.1.3027.10003.1.1 | ColumnncmidcsuDiagNIDIndex | read-only | mandatory | This variable indicates the node id value of the node. |
| 1.3.6.1.4.1.321.1.3027.10003.1.2 | ColumnncmidcsuDiagnosticIndex | read-only | mandatory | |
| 1.3.6.1.4.1.321.1.3027.10003.1.3 | ColumnncmidcsuAlarmSetDelay | read-write | mandatory | The ncmidcsu alarm set delay. |
| 1.3.6.1.4.1.321.1.3027.10003.1.4 | ColumnncmidcsuAlarmClearDelay | read-write | mandatory | The ncmidcsu alarm clear delay. |
| 1.3.6.1.4.1.321.1.3027.10003.1.5 | ColumnncmidcsuAlarmEnable | read-write | mandatory | The ncmidcsu alarm reporting. |
| 1.3.6.1.4.1.321.1.3027.10003.1.6 | ColumnncmidcsuLoopback | read-write | mandatory | The ncmidcsu loop back config. |
| 1.3.6.1.4.1.321.1.3027.10003.1.7 | Columnncmdteloops | read-write | mandatory | The dte loops of the ncmidcsu . |
| 1.3.6.1.4.1.321.1.3027.10003.1.8 | ColumnncmidcsuTestPattern | read-write | mandatory | The ncmidcsu test pattern config. |
| 1.3.6.1.4.1.321.1.3027.10003.1.9 | ColumnncmidcsuResetPerfReg | read-write | mandatory | The ncmcsu reset performance monitoring register |
| 1.3.6.1.4.1.321.1.3027.10003.1.10 | ColumnncmidcsuTestErrorCounter | read-only | mandatory | The ncm idcsu test error counter in the test status |
| 1.3.6.1.4.1.321.1.3027.10003.1.11 | ColumnncmidcsuTestSecondsRemain | read-only | mandatory | The ncm idcsu test seconds remaining in the test status |
| 1.3.6.1.4.1.321.1.3027.10003.1.12 | ColumnncmidcsuTestTimeSeconds | read-write | mandatory | The idcsu test time duration. Enter Value (0-142, 255) 0 corresponds to 0 Sec (Default) 1 - 59 corresponds to 1-59 Seconds 60 - 118 corresponds to 1-59 Min 119… |
| 1.3.6.1.4.1.321.1.3027.10003.1.13 | ColumnncmidcsuNetLOFCIndexTime | read-write | mandatory | The idcsu net lofc index time |
| 1.3.6.1.4.1.321.1.3027.10003.1.14 | ColumnncmidcsuChannelMask | read-write | mandatory | The idcsu channel mask for the 24 channels |
| 1.3.6.1.4.1.321.1.3027.10003.1.15 | ColumnncmidcsuApplication | read-write | mandatory | The idcsu application mode |
| 1.3.6.1.4.1.321.1.3027.10003.1.16 | ColumnncmidcsuTestIntervalIndex | read-write | mandatory | The idcsu Test Inteval Index value used for test pattern (0 - config default). |