VERILINK-ENTERPRISE-NCMISDN-MIB
95 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.321.1.3031.8000 | TablencmPRIPortConfigTable | not-accessible | mandatory | The PRI Port Configuration table . |
| 1.3.6.1.4.1.321.1.3031.8000.1 | RowncmPRIPortConfigEntry | not-accessible | mandatory | An entry in the PRI Port Configuration table . |
| 1.3.6.1.4.1.321.1.3031.8000.1.1 | ColumnncmPRIPortNIDIndex | read-only | mandatory | The object specifies the node id of the node. |
| 1.3.6.1.4.1.321.1.3031.8000.1.2 | ColumnncmPRIPortLineIndex | read-only | mandatory | The index value which uniquely identifies the interface to which this entry is applicable. |
| 1.3.6.1.4.1.321.1.3031.8000.1.3 | ColumnncmPRIPortInService | read-write | mandatory | The object specifies whether the PRI Port is in service or not. |
| 1.3.6.1.4.1.321.1.3031.8000.1.4 | ColumnncmPRIPortNFASMode | read-write | mandatory | The variable specifies the Pri NFAS mode. For DPRI card, it has selections of 1)No Nfas, 2)Nfas For QPRI card, it has selections of 1)No Nfas, 2)Nfas on 4, 3)N… |
| 1.3.6.1.4.1.321.1.3031.8000.1.5 | ColumnncmPRIPortDChanMode | read-write | mandatory | The variable specifies the pri D-channel mode. |
| 1.3.6.1.4.1.321.1.3031.8000.1.6 | ColumnncmPRIPortDChanBits | read-write | mandatory | The variable specifies the pri D-channel bits. |
| 1.3.6.1.4.1.321.1.3031.8000.1.7 | ColumnncmPRIPortTimeslotMap | read-write | mandatory | The variable specifies the timeslot map. |
| 1.3.6.1.4.1.321.1.3031.8000.1.8 | ColumnncmPRIPortSwitchType | read-write | mandatory | The variable specifies the pri switch type. |
| 1.3.6.1.4.1.321.1.3031.8000.1.9 | ColumnncmPRIPortOwnNumPlan | read-write | mandatory | The variable specifies the pri own numbering plan. |
| 1.3.6.1.4.1.321.1.3031.8000.1.10 | ColumnncmPRIPortOwnNumType | read-write | mandatory | The variable specifies the pri own numbering type. |
| 1.3.6.1.4.1.321.1.3031.8000.1.11 | ColumnncmPRIPortSecurityLevel | read-write | mandatory | The variable specifies the fdl mode which is bit 0 of fdl Parameter1. |
| 1.3.6.1.4.1.321.1.3031.8000.1.12 | ColumnncmPRIPortConfigStatus | read-only | mandatory | The variable specifies the configuration result. |
| 1.3.6.1.4.1.321.1.3031.8000.1.13 | ColumnncmPRIPortSetConfig | read-write | mandatory | The set configuration operation that involves sending out the ACP message to set the configuration with the setup parameters |
| 1.3.6.1.4.1.321.1.3031.8000.1.14 | ColumnncmPRICallProfCallRefCount | read-only | mandatory | The variable specifies the number of valid call reference numbers |
| 1.3.6.1.4.1.321.1.3031.8000.1.15 | ColumnncmPRIL2AutoEstablish | read-write | mandatory | The object specifies whether the PRI Port has an Auto establishment for Layer-2 or not. |
| 1.3.6.1.4.1.321.1.3031.8000.1.16 | ColumnncmPRIResetCard | read-write | mandatory | The reset card operation that involves sending out the ACP message to reset the card |
| 1.3.6.1.4.1.321.1.3031.8001 | TablencmPRICallProfileTable | not-accessible | mandatory | The PRI Call Profile table . |
| 1.3.6.1.4.1.321.1.3031.8001.1 | RowncmPRICallProfEntry | not-accessible | mandatory | An entry in the PRI Call Profile table . |
| 1.3.6.1.4.1.321.1.3031.8001.1.1 | ColumnncmPRICallProfNIDIndex | read-only | mandatory | The object specifies the node id of the node. |
| 1.3.6.1.4.1.321.1.3031.8001.1.2 | ColumnncmPRICallProfLineIndex | read-only | mandatory | The index value which uniquely identifies the interface to which this entry is applicable. |
| 1.3.6.1.4.1.321.1.3031.8001.1.3 | ColumnncmPRICPCallProfileRef | read-write | mandatory | The variable specifies the number of the call profile in the list (starting from one, then two and so on). |
| 1.3.6.1.4.1.321.1.3031.8001.1.4 | ColumnncmPRICallProfCallDir | read-write | mandatory | The variable specifies the call direction. |
| 1.3.6.1.4.1.321.1.3031.8001.1.5 | ColumnncmPRICallProfNumOwnDigit | read-write | mandatory | The variable specifies the number of own digits. |
| 1.3.6.1.4.1.321.1.3031.8001.1.6 | ColumnncmPRICallProfOwnCallNum | read-write | mandatory | The variable specifies the own call number. |
| 1.3.6.1.4.1.321.1.3031.8001.1.7 | ColumnncmPRICallProfExtNumPlan | read-write | mandatory | The variable specifies the external numbering plan. |
| 1.3.6.1.4.1.321.1.3031.8001.1.8 | ColumnncmPRICallProfExtNumType | read-write | mandatory | The variable specifies the external numbering type. |
| 1.3.6.1.4.1.321.1.3031.8001.1.9 | ColumnncmPRICallProfExtNumDigit | read-write | mandatory | The variable specifies the external number of digits. |
| 1.3.6.1.4.1.321.1.3031.8001.1.10 | ColumnncmPRICallProfExtCallNum | read-write | mandatory | The variable specifies the external call number. |
| 1.3.6.1.4.1.321.1.3031.8001.1.11 | ColumnncmPRICallProfTransferMode | read-write | mandatory | The variable specifies the transfer mode. |
| 1.3.6.1.4.1.321.1.3031.8001.1.12 | ColumnncmPRICallProfCallBandWth | read-write | mandatory | The variable specifies the call bandwidth. |
| 1.3.6.1.4.1.321.1.3031.8001.1.13 | ColumnncmPRICallProfMultiRateCnt | read-write | mandatory | The variable specifies the multirate count. |
| 1.3.6.1.4.1.321.1.3031.8001.1.14 | ColumnncmPRICallProfRateAdaptn | read-write | mandatory | The variable specifies the rate adaptation. |
| 1.3.6.1.4.1.321.1.3031.8001.1.15 | ColumnncmPRICallProfTestCallIntvl | read-write | mandatory | The variable specifies the test call interval. |
| 1.3.6.1.4.1.321.1.3031.8001.1.16 | ColumnncmPRICallProfCallStatus | read-only | mandatory | The variable specifies the get call profile call status. |
| 1.3.6.1.4.1.321.1.3031.8001.1.17 | ColumnncmPRICallProfCallAction | read-write | mandatory | The variable specifies the call profile call action. |
| 1.3.6.1.4.1.321.1.3031.8001.1.18 | ColumnncmPRICPSetCallProf | read-write | mandatory | The variable specifies the call profile call action. |
| 1.3.6.1.4.1.321.1.3031.8001.1.19 | ColumnncmPRICPSetCallProfResp | read-only | mandatory | The variable specifies the set call profile result |
| 1.3.6.1.4.1.321.1.3031.8001.1.20 | ColumnncmPRICPCallActionResp | read-only | mandatory | The variable specifies the call action result |
| 1.3.6.1.4.1.321.1.3031.8002 | TablencmPRICallProfListTable | not-accessible | mandatory | The PRI Call Profile List table . |
| 1.3.6.1.4.1.321.1.3031.8002.1 | RowncmPRICallProfListEntry | not-accessible | mandatory | An entry in the PRI Call Profile List table . |
| 1.3.6.1.4.1.321.1.3031.8002.1.1 | ColumnncmPRICPListNIDIndex | read-only | mandatory | The object specifies the node id of the node of the call profile list group. |
| 1.3.6.1.4.1.321.1.3031.8002.1.2 | ColumnncmPRICPListLineIndex | read-only | mandatory | The index value which uniquely identifies the interface to which this entry is applicable. |
| 1.3.6.1.4.1.321.1.3031.8002.1.3 | ColumnncmPRICPListIndex | read-only | mandatory | The call profile list call reference index. |
| 1.3.6.1.4.1.321.1.3031.8002.1.4 | ColumnncmPRICPListValidCPRefNum | read-only | mandatory | The variable is the valid call reference number. |
| 1.3.6.1.4.1.321.1.3031.8003 | TablencmPRICurrentTable | not-accessible | mandatory | The PRI Current Interval table . |
| 1.3.6.1.4.1.321.1.3031.8003.1 | RowncmPRICurrentEntry | not-accessible | mandatory | An entry in the PRI Current Interval table . |
| 1.3.6.1.4.1.321.1.3031.8003.1.1 | ColumnncmPRICurrNIDIndex | read-only | mandatory | The object specifies the node id of the node. |
| 1.3.6.1.4.1.321.1.3031.8003.1.2 | ColumnncmPRICurrLineIndex | read-only | mandatory | The index value which uniquely identifies the interface to which this entry is applicable. |
| 1.3.6.1.4.1.321.1.3031.8003.1.3 | ColumnncmPRICurrEndType | read-only | mandatory | The variable specifies the End Type . |
| 1.3.6.1.4.1.321.1.3031.8003.1.4 | ColumnncmPRICurrTimestamp | read-only | mandatory | The object specifies the timestamp in seconds. |
| 1.3.6.1.4.1.321.1.3031.8003.1.5 | ColumnncmPRICurrSecsInCurrIntvl | read-only | mandatory | The object specifies the seconds in current interval. |
| 1.3.6.1.4.1.321.1.3031.8003.1.6 | ColumnncmPRICurrInfoRx | read-only | mandatory | The object specifies the current INFOs received. |
| 1.3.6.1.4.1.321.1.3031.8003.1.7 | ColumnncmPRICurrInfoTx | read-only | mandatory | The object specifies the current INFOs transmitted. |
| 1.3.6.1.4.1.321.1.3031.8003.1.8 | ColumnncmPRICurrCRCErrRx | read-only | mandatory | The object specifies the current CRC errors received. |
| 1.3.6.1.4.1.321.1.3031.8003.1.9 | ColumnncmPRICurrInvalidFrameRx | read-only | mandatory | The object specifies the current invalid frames received. |
| 1.3.6.1.4.1.321.1.3031.8003.1.10 | ColumnncmPRICurrFrameAbortRx | read-only | mandatory | The object specifies the current frame aborts received. |
| 1.3.6.1.4.1.321.1.3031.8003.1.11 | ColumnncmPRICurrDISCSRx | read-only | mandatory | The object specifies the current DISCs received. |
| 1.3.6.1.4.1.321.1.3031.8003.1.12 | ColumnncmPRICurrDISCSTx | read-only | mandatory | The object specifies the current DISCs transmitted. |
| 1.3.6.1.4.1.321.1.3031.8003.1.13 | ColumnncmPRICurrFramerRx | read-only | mandatory | The object specifies the current framer received. |
| 1.3.6.1.4.1.321.1.3031.8003.1.14 | ColumnncmPRICurrFramerTx | read-only | mandatory | The object specifies the current framer transmitted. |
| 1.3.6.1.4.1.321.1.3031.8003.1.15 | ColumnncmPRICurrLyr3ProtErr | read-only | mandatory | The object specifies the current Layer 3 protocol errors. |
| 1.3.6.1.4.1.321.1.3031.8003.1.16 | ColumnncmPRICurrCallSetupSent | read-only | mandatory | The object specifies the current call setup sent. |
| 1.3.6.1.4.1.321.1.3031.8003.1.17 | ColumnncmPRICurrCallSetupSentnFail | read-only | mandatory | The object specifies the current call setup sent and failed. |
| 1.3.6.1.4.1.321.1.3031.8003.1.18 | ColumnncmPRICurrCallSetupRx | read-only | mandatory | The object specifies the current call setup received. |
| 1.3.6.1.4.1.321.1.3031.8003.1.19 | ColumnncmPRICurrCallSetupRxnFail | read-only | mandatory | The object specifies the current call setup received and failed. |
| 1.3.6.1.4.1.321.1.3031.8003.1.20 | ColumnncmPRICurrUnSupportMsgRx | read-only | mandatory | The object specifies the current unsupported message received. |
| 1.3.6.1.4.1.321.1.3031.8003.1.21 | ColumnncmPRICurrTstCalSetupSentnFail | read-only | mandatory | The object specifies the current test call setups sent and failed. |
| 1.3.6.1.4.1.321.1.3031.8003.1.22 | ColumnncmPRICurrValidIntvls | read-only | mandatory | A number between 1 and 96 |
| 1.3.6.1.4.1.321.1.3031.8003.1.23 | ColumnncmPRICurrStatisticReset | read-write | mandatory | The variable specifies the statistic reset operation. |
| 1.3.6.1.4.1.321.1.3031.8004 | TablencmPRIIntervalTable | not-accessible | mandatory | The PRI Interval table . |
| 1.3.6.1.4.1.321.1.3031.8004.1 | RowncmPRIIntervalEntry | not-accessible | mandatory | An entry in the PRI Interval table . |
| 1.3.6.1.4.1.321.1.3031.8004.1.1 | ColumnncmPRIntvlNIDIndex | read-only | mandatory | The object specifies the node id of the node. |
| 1.3.6.1.4.1.321.1.3031.8004.1.2 | ColumnncmPRIntvlLineIndex | read-only | mandatory | The index value which uniquely identifies the interface to which this entry is applicable. |
| 1.3.6.1.4.1.321.1.3031.8004.1.3 | ColumnncmPRIntvlEndType | read-only | mandatory | The variable specifies the End Type . |
| 1.3.6.1.4.1.321.1.3031.8004.1.4 | ColumnncmPRIntvlIndex | read-only | mandatory | The interval index. |
| 1.3.6.1.4.1.321.1.3031.8004.1.5 | ColumnncmPRIntvlTimestamp | read-only | mandatory | The object specifies the interval timestamp in seconds. |
| 1.3.6.1.4.1.321.1.3031.8004.1.6 | ColumnncmPRIntvlSecsInCurrIntvl | read-only | mandatory | The object specifies the interval seconds in current interval. |
| 1.3.6.1.4.1.321.1.3031.8004.1.7 | ColumnncmPRIntvlInfoRx | read-only | mandatory | The object specifies the interval INFOs received. |
| 1.3.6.1.4.1.321.1.3031.8004.1.8 | ColumnncmPRIntvlInfoTx | read-only | mandatory | The object specifies the interval INFOs transmitted. |
| 1.3.6.1.4.1.321.1.3031.8004.1.9 | ColumnncmPRIntvlCRCErrRx | read-only | mandatory | The object specifies the interval CRC errors received. |
| 1.3.6.1.4.1.321.1.3031.8004.1.10 | ColumnncmPRIntvlInvalidFrameRx | read-only | mandatory | The object specifies the interval invalid frames received. |
| 1.3.6.1.4.1.321.1.3031.8004.1.11 | ColumnncmPRIntvlFrameAbortRx | read-only | mandatory | The object specifies the interval frame aborts received. |
| 1.3.6.1.4.1.321.1.3031.8004.1.12 | ColumnncmPRIntvlDISCSRx | read-only | mandatory | The object specifies the interval DISCs received. |
| 1.3.6.1.4.1.321.1.3031.8004.1.13 | ColumnncmPRIntvlDISCSTx | read-only | mandatory | The object specifies the interval DISCs transmitted. |
| 1.3.6.1.4.1.321.1.3031.8004.1.14 | ColumnncmPRIntvlFramerRx | read-only | mandatory | The object specifies the interval framer received. |
| 1.3.6.1.4.1.321.1.3031.8004.1.15 | ColumnncmPRIntvlFramerTx | read-only | mandatory | The object specifies the interval framer transmitted. |
| 1.3.6.1.4.1.321.1.3031.8004.1.16 | ColumnncmPRIntvlLyr3ProtErr | read-only | mandatory | The object specifies the interval Layer 3 protocol errors. |
| 1.3.6.1.4.1.321.1.3031.8004.1.17 | ColumnncmPRIntvlCallSetupSent | read-only | mandatory | The object specifies the interval call setup sent. |
| 1.3.6.1.4.1.321.1.3031.8004.1.18 | ColumnncmPRIntvlCallSetupSentnFail | read-only | mandatory | The object specifies the interval call setup sent and failed. |
| 1.3.6.1.4.1.321.1.3031.8004.1.19 | ColumnncmPRIntvlCallSetupRx | read-only | mandatory | The object specifies the interval call setup received. |
| 1.3.6.1.4.1.321.1.3031.8004.1.20 | ColumnncmPRIntvlCallSetupRxnFail | read-only | mandatory | The object specifies the interval call setup received and failed. |
| 1.3.6.1.4.1.321.1.3031.8004.1.21 | ColumnncmPRIntvlUnSupportMsgRx | read-only | mandatory | The object specifies the interval unsupported message received. |
| 1.3.6.1.4.1.321.1.3031.8004.1.22 | ColumnncmPRIntvlTstCalSetupSentnFail | read-only | mandatory | The object specifies the interval test call setups sent and failed. |