VERILINK-ENTERPRISE-NCMJAPISDN-MIB
118 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | -- Gauge -- |
| RFC1213-MIB | DisplayString |
| VERILINK-ENTERPRISE-NCMALARM-MIB | ncm-japisdn |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.321.1.3038.8000 | TablencmJapPRIPortConfigTable | not-accessible | mandatory | The Japanese PRI Port Configuration table . |
| 1.3.6.1.4.1.321.1.3038.8000.1 | RowncmJapPRIPortConfigEntry | not-accessible | mandatory | An entry in the Japanese PRI Port Configuration table . |
| 1.3.6.1.4.1.321.1.3038.8000.1.1 | ColumnncmJapPRIPortNIDIndex | read-only | mandatory | The object specifies the node id of the node. |
| 1.3.6.1.4.1.321.1.3038.8000.1.2 | ColumnncmJapPRIPortLineIndex | read-only | mandatory | The index value which uniquely identifies the interface to which this entry is applicable. |
| 1.3.6.1.4.1.321.1.3038.8000.1.3 | ColumnncmJapPRIPortInService | read-write | mandatory | The object specifies whether the PRI Port is in service or not. |
| 1.3.6.1.4.1.321.1.3038.8000.1.4 | ColumnncmJapPRIPortNFASMode | read-write | mandatory | The variable specifies the pri NFAS mode. |
| 1.3.6.1.4.1.321.1.3038.8000.1.5 | ColumnncmJapPRIPortDChanMode | read-write | mandatory | The variable specifies the pri D-channel mode. |
| 1.3.6.1.4.1.321.1.3038.8000.1.6 | ColumnncmJapPRIPortDChanBits | read-write | mandatory | The variable specifies the pri D-channel bits. |
| 1.3.6.1.4.1.321.1.3038.8000.1.7 | ColumnncmJapPRIPortTimeslotMap | read-write | mandatory | The variable specifies the timeslot map. |
| 1.3.6.1.4.1.321.1.3038.8000.1.8 | ColumnncmJapPRIPortSwitchType | read-write | mandatory | The variable specifies the pri switch type. |
| 1.3.6.1.4.1.321.1.3038.8000.1.9 | ColumnncmJapPRIPortOwnNumPlan | read-write | mandatory | The variable specifies the pri own numbering plan. |
| 1.3.6.1.4.1.321.1.3038.8000.1.10 | ColumnncmJapPRIPortOwnNumType | read-write | mandatory | The variable specifies the pri own numbering type. |
| 1.3.6.1.4.1.321.1.3038.8000.1.11 | ColumnncmJapPRIPortSecurityLevel | read-write | mandatory | The variable specifies the fdl mode which is bit 0 of fdl Parameter1. |
| 1.3.6.1.4.1.321.1.3038.8000.1.12 | ColumnncmJapPRIPortConfigStatus | read-only | mandatory | The variable specifies the configuration result. |
| 1.3.6.1.4.1.321.1.3038.8000.1.13 | ColumnncmJapPRIPortSetConfig | read-write | mandatory | The set configuration operation that involves sending out the ACP message to set the configuration with the setup parameters |
| 1.3.6.1.4.1.321.1.3038.8000.1.14 | ColumnncmJapPRICallProfCallRefCount | read-only | mandatory | The variable specifies the number of valid call reference numbers |
| 1.3.6.1.4.1.321.1.3038.8000.1.15 | ColumnncmJapPRIL2AutoEstablish | read-write | mandatory | The object specifies whether the PRI Port has an Auto establishment for Layer-2 or not. |
| 1.3.6.1.4.1.321.1.3038.8001 | TablencmJapPRICallProfileTable | not-accessible | mandatory | The PRI Call Profile table . |
| 1.3.6.1.4.1.321.1.3038.8001.1 | RowncmJapPRICallProfEntry | not-accessible | mandatory | An entry in the PRI Call Profile table . |
| 1.3.6.1.4.1.321.1.3038.8001.1.1 | ColumnncmJapPRICallProfNIDIndex | read-only | mandatory | The object specifies the node id of the node. |
| 1.3.6.1.4.1.321.1.3038.8001.1.2 | ColumnncmJapPRICallProfLineIndex | read-only | mandatory | The index value which uniquely identifies the interface to which this entry is applicable. |
| 1.3.6.1.4.1.321.1.3038.8001.1.3 | ColumnncmJapPRICPCallProfileRef | read-write | mandatory | The variable specifies the number of the call profile in the list (starting from one, then two and so on). |
| 1.3.6.1.4.1.321.1.3038.8001.1.4 | ColumnncmJapPRICallProfCallDir | read-write | mandatory | The variable specifies the call direction. |
| 1.3.6.1.4.1.321.1.3038.8001.1.5 | ColumnncmJapPRICallProfNumOwnDigit | read-write | mandatory | The variable specifies the number of own digits. |
| 1.3.6.1.4.1.321.1.3038.8001.1.6 | ColumnncmJapPRICallProfOwnCallNum | read-write | mandatory | The variable specifies the own call number. |
| 1.3.6.1.4.1.321.1.3038.8001.1.7 | ColumnncmJapPRICallProfExtNumPlan | read-write | mandatory | The variable specifies the external numbering plan. |
| 1.3.6.1.4.1.321.1.3038.8001.1.8 | ColumnncmJapPRICallProfExtNumType | read-write | mandatory | The variable specifies the external numbering type. |
| 1.3.6.1.4.1.321.1.3038.8001.1.9 | ColumnncmJapPRICallProfExtNumDigit | read-write | mandatory | The variable specifies the external number of digits. |
| 1.3.6.1.4.1.321.1.3038.8001.1.10 | ColumnncmJapPRICallProfExtCallNum | read-write | mandatory | The variable specifies the external call number. |
| 1.3.6.1.4.1.321.1.3038.8001.1.11 | ColumnncmJapPRICallProfTransferMode | read-write | mandatory | The variable specifies the transfer mode. |
| 1.3.6.1.4.1.321.1.3038.8001.1.12 | ColumnncmJapPRICallProfCallBandWth | read-write | mandatory | The variable specifies the call bandwidth. |
| 1.3.6.1.4.1.321.1.3038.8001.1.13 | ColumnncmJapPRICallProfMultiRateCnt | read-write | mandatory | The variable specifies the multirate count. Not use for the time being. |
| 1.3.6.1.4.1.321.1.3038.8001.1.14 | ColumnncmJapPRICallProfRateAdaptn | read-write | mandatory | The variable specifies the rate adaptation. |
| 1.3.6.1.4.1.321.1.3038.8001.1.15 | ColumnncmJapPRICallProfTestCallIntvl | read-write | mandatory | The variable specifies the test call interval. |
| 1.3.6.1.4.1.321.1.3038.8001.1.16 | ColumnncmJapPRICallProfCallStatus | read-only | mandatory | The variable specifies the get call profile call status. |
| 1.3.6.1.4.1.321.1.3038.8001.1.17 | ColumnncmJapPRICallProfCallAction | read-write | mandatory | The variable specifies the call profile call action. |
| 1.3.6.1.4.1.321.1.3038.8001.1.18 | ColumnncmJapPRICPSetCallProf | read-write | mandatory | The variable specifies the call profile call action. |
| 1.3.6.1.4.1.321.1.3038.8001.1.19 | ColumnncmJapPRICPSetCallProfResp | read-only | mandatory | The variable specifies the set call profile result |
| 1.3.6.1.4.1.321.1.3038.8001.1.20 | ColumnncmJapPRICPCallActionResp | read-only | mandatory | The variable specifies the call action result |
| 1.3.6.1.4.1.321.1.3038.8002 | TablencmJapPRICallProfListTable | not-accessible | mandatory | The PRI Call Profile List table . |
| 1.3.6.1.4.1.321.1.3038.8002.1 | RowncmJapPRICallProfListEntry | not-accessible | mandatory | An entry in the PRI Call Profile List table . |
| 1.3.6.1.4.1.321.1.3038.8002.1.1 | ColumnncmJapPRICPListNIDIndex | read-only | mandatory | The object specifies the node id of the node of the call profile list group. |
| 1.3.6.1.4.1.321.1.3038.8002.1.2 | ColumnncmJapPRICPListLineIndex | read-only | mandatory | The index value which uniquely identifies the interface to which this entry is applicable. |
| 1.3.6.1.4.1.321.1.3038.8002.1.3 | ColumnncmJapPRICPListIndex | read-only | mandatory | The call profile list call reference index. |
| 1.3.6.1.4.1.321.1.3038.8002.1.4 | ColumnncmJapPRICPListValidCPRefNum | read-only | mandatory | The variable is the valid call reference number. |
| 1.3.6.1.4.1.321.1.3038.8003 | TablencmJapPRICurrentTable | not-accessible | mandatory | The PRI Current Interval table . |
| 1.3.6.1.4.1.321.1.3038.8003.1 | RowncmJapPRICurrentEntry | not-accessible | mandatory | An entry in the PRI Current Interval table . |
| 1.3.6.1.4.1.321.1.3038.8003.1.1 | ColumnncmJapPRICurrNIDIndex | read-only | mandatory | The object specifies the node id of the node. |
| 1.3.6.1.4.1.321.1.3038.8003.1.2 | ColumnncmJapPRICurrLineIndex | read-only | mandatory | The index value which uniquely identifies the interface to which this entry is applicable. |
| 1.3.6.1.4.1.321.1.3038.8003.1.3 | ColumnncmJapPRICurrEndType | read-only | mandatory | The variable specifies the End Type . |
| 1.3.6.1.4.1.321.1.3038.8003.1.4 | ColumnncmJapPRICurrTimestamp | read-only | mandatory | The object specifies the timestamp in seconds. |
| 1.3.6.1.4.1.321.1.3038.8003.1.5 | ColumnncmJapPRICurrSecsInCurrIntvl | read-only | mandatory | The object specifies the seconds in current interval. |
| 1.3.6.1.4.1.321.1.3038.8003.1.6 | ColumnncmJapPRICurrInfoRx | read-only | mandatory | The object specifies the current INFOs received. |
| 1.3.6.1.4.1.321.1.3038.8003.1.7 | ColumnncmJapPRICurrInfoTx | read-only | mandatory | The object specifies the current INFOs transmitted. |
| 1.3.6.1.4.1.321.1.3038.8003.1.8 | ColumnncmJapPRICurrCRCErrRx | read-only | mandatory | The object specifies the current CRC errors received. |
| 1.3.6.1.4.1.321.1.3038.8003.1.9 | ColumnncmJapPRICurrInvalidFrameRx | read-only | mandatory | The object specifies the current invalid frames received. |
| 1.3.6.1.4.1.321.1.3038.8003.1.10 | ColumnncmJapPRICurrFrameAbortRx | read-only | mandatory | The object specifies the current frame aborts received. |
| 1.3.6.1.4.1.321.1.3038.8003.1.11 | ColumnncmJapPRICurrDISCSRx | read-only | mandatory | The object specifies the current DISCs received. |
| 1.3.6.1.4.1.321.1.3038.8003.1.12 | ColumnncmJapPRICurrDISCSTx | read-only | mandatory | The object specifies the current DISCs transmitted. |
| 1.3.6.1.4.1.321.1.3038.8003.1.13 | ColumnncmJapPRICurrFramerRx | read-only | mandatory | The object specifies the current framer received. |
| 1.3.6.1.4.1.321.1.3038.8003.1.14 | ColumnncmJapPRICurrFramerTx | read-only | mandatory | The object specifies the current framer transmitted. |
| 1.3.6.1.4.1.321.1.3038.8003.1.15 | ColumnncmJapPRICurrLyr3ProtErr | read-only | mandatory | The object specifies the current Layer 3 protocol errors. |
| 1.3.6.1.4.1.321.1.3038.8003.1.16 | ColumnncmJapPRICurrCallSetupSent | read-only | mandatory | The object specifies the current call setup sent. |
| 1.3.6.1.4.1.321.1.3038.8003.1.17 | ColumnncmJapPRICurrCallSetupSentnFail | read-only | mandatory | The object specifies the current call setup sent and failed. |
| 1.3.6.1.4.1.321.1.3038.8003.1.18 | ColumnncmJapPRICurrCallSetupRx | read-only | mandatory | The object specifies the current call setup received. |
| 1.3.6.1.4.1.321.1.3038.8003.1.19 | ColumnncmJapPRICurrCallSetupRxnFail | read-only | mandatory | The object specifies the current call setup received and failed. |
| 1.3.6.1.4.1.321.1.3038.8003.1.20 | ColumnncmJapPRICurrUnSupportMsgRx | read-only | mandatory | The object specifies the current unsupported message received. |
| 1.3.6.1.4.1.321.1.3038.8003.1.21 | ColumnncmJapPRICurrTstCalSetupSentnFail | read-only | mandatory | The object specifies the current test call setups sent and failed. |
| 1.3.6.1.4.1.321.1.3038.8003.1.22 | ColumnncmJapPRICurrValidIntvls | read-only | mandatory | A number between 1 and 96 |
| 1.3.6.1.4.1.321.1.3038.8003.1.23 | ColumnncmJapPRICurrStatisticReset | read-write | mandatory | The variable specifies the statistic reset operation. |
| 1.3.6.1.4.1.321.1.3038.8004 | TablencmJapPRIIntervalTable | not-accessible | mandatory | The PRI Interval table . |
| 1.3.6.1.4.1.321.1.3038.8004.1 | RowncmJapPRIIntervalEntry | not-accessible | mandatory | An entry in the PRI Interval table . |
| 1.3.6.1.4.1.321.1.3038.8004.1.1 | ColumnncmJapPRIntvlNIDIndex | read-only | mandatory | The object specifies the node id of the node. |
| 1.3.6.1.4.1.321.1.3038.8004.1.2 | ColumnncmJapPRIntvlLineIndex | read-only | mandatory | The index value which uniquely identifies the interface to which this entry is applicable. |
| 1.3.6.1.4.1.321.1.3038.8004.1.3 | ColumnncmJapPRIntvlEndType | read-only | mandatory | The variable specifies the End Type . |
| 1.3.6.1.4.1.321.1.3038.8004.1.4 | ColumnncmJapPRIntvlIndex | read-only | mandatory | The interval index. |
| 1.3.6.1.4.1.321.1.3038.8004.1.5 | ColumnncmJapPRIntvlTimestamp | read-only | mandatory | The object specifies the interval timestamp in seconds. |
| 1.3.6.1.4.1.321.1.3038.8004.1.6 | ColumnncmJapPRIntvlSecsInCurrIntvl | read-only | mandatory | The object specifies the interval seconds in current interval. |
| 1.3.6.1.4.1.321.1.3038.8004.1.7 | ColumnncmJapPRIntvlInfoRx | read-only | mandatory | The object specifies the interval INFOs received. |
| 1.3.6.1.4.1.321.1.3038.8004.1.8 | ColumnncmJapPRIntvlInfoTx | read-only | mandatory | The object specifies the interval INFOs transmitted. |
| 1.3.6.1.4.1.321.1.3038.8004.1.9 | ColumnncmJapPRIntvlCRCErrRx | read-only | mandatory | The object specifies the interval CRC errors received. |
| 1.3.6.1.4.1.321.1.3038.8004.1.10 | ColumnncmJapPRIntvlInvalidFrameRx | read-only | mandatory | The object specifies the interval invalid frames received. |
| 1.3.6.1.4.1.321.1.3038.8004.1.11 | ColumnncmJapPRIntvlFrameAbortRx | read-only | mandatory | The object specifies the interval frame aborts received. |
| 1.3.6.1.4.1.321.1.3038.8004.1.12 | ColumnncmJapPRIntvlDISCSRx | read-only | mandatory | The object specifies the interval DISCs received. |
| 1.3.6.1.4.1.321.1.3038.8004.1.13 | ColumnncmJapPRIntvlDISCSTx | read-only | mandatory | The object specifies the interval DISCs transmitted. |
| 1.3.6.1.4.1.321.1.3038.8004.1.14 | ColumnncmJapPRIntvlFramerRx | read-only | mandatory | The object specifies the interval framer received. |
| 1.3.6.1.4.1.321.1.3038.8004.1.15 | ColumnncmJapPRIntvlFramerTx | read-only | mandatory | The object specifies the interval framer transmitted. |
| 1.3.6.1.4.1.321.1.3038.8004.1.16 | ColumnncmJapPRIntvlLyr3ProtErr | read-only | mandatory | The object specifies the interval Layer 3 protocol errors. |
| 1.3.6.1.4.1.321.1.3038.8004.1.17 | ColumnncmJapPRIntvlCallSetupSent | read-only | mandatory | The object specifies the interval call setup sent. |
| 1.3.6.1.4.1.321.1.3038.8004.1.18 | ColumnncmJapPRIntvlCallSetupSentnFail | read-only | mandatory | The object specifies the interval call setup sent and failed. |
| 1.3.6.1.4.1.321.1.3038.8004.1.19 | ColumnncmJapPRIntvlCallSetupRx | read-only | mandatory | The object specifies the interval call setup received. |
| 1.3.6.1.4.1.321.1.3038.8004.1.20 | ColumnncmJapPRIntvlCallSetupRxnFail | read-only | mandatory | The object specifies the interval call setup received and failed. |
| 1.3.6.1.4.1.321.1.3038.8004.1.21 | ColumnncmJapPRIntvlUnSupportMsgRx | read-only | mandatory | The object specifies the interval unsupported message received. |
| 1.3.6.1.4.1.321.1.3038.8004.1.22 | ColumnncmJapPRIntvlTstCalSetupSentnFail | read-only | mandatory | The object specifies the interval test call setups sent and failed. |
| 1.3.6.1.4.1.321.1.3038.8005 | TablencmJapPRISecurOperTable | not-accessible | mandatory | The PRI Security Operation Table . |
| 1.3.6.1.4.1.321.1.3038.8005.1 | RowncmJapPRISecurOperEntry | not-accessible | mandatory | An entry in the PRI Security Operation Table . |
| 1.3.6.1.4.1.321.1.3038.8005.1.1 | ColumnncmJapPRISecOpNIDIndex | read-only | mandatory | The object specifies the node id of the node. |
| 1.3.6.1.4.1.321.1.3038.8005.1.2 | ColumnncmJapPRISecOpLineIndex | read-only | mandatory | The index value which uniquely identifies the interface to which this entry is applicable. |
| 1.3.6.1.4.1.321.1.3038.8005.1.3 | ColumnncmJapPRISecOpFirstNum | read-write | mandatory | The first item number of the present group of security number. |
| 1.3.6.1.4.1.321.1.3038.8005.1.4 | ColumnncmJapPRISecOpListype | read-write | mandatory | The variable specifies the type of list: own or remote numbers. |
| 1.3.6.1.4.1.321.1.3038.8005.1.5 | ColumnncmJapPRISecOpCountNum | read-only | mandatory | The variable specifies the number of numbers/elements in this group. |
| 1.3.6.1.4.1.321.1.3038.8005.1.6 | ColumnncmJapPRISecOpClearElement | read-write | mandatory | The variable specifies the element number of the number to be cleared. |
| 1.3.6.1.4.1.321.1.3038.8005.1.7 | ColumnncmJapPRISecOpStatus | read-only | mandatory | The variable specifies the result of writing security number. |
| 1.3.6.1.4.1.321.1.3038.8005.1.8 | ColumnncmJapPRISecOpAction | read-write | mandatory | The operation that involves sending the corresponding ACP command to execute the specified action with all necessary parameters setup properly. |
| 1.3.6.1.4.1.321.1.3038.8006 | TablencmJapPRISecurNumbTable | not-accessible | mandatory | The PRI Security Number table . |
| 1.3.6.1.4.1.321.1.3038.8006.1 | RowncmJapPRISecurNumbEntry | not-accessible | mandatory | An entry in the PRI Security Number table . |
| 1.3.6.1.4.1.321.1.3038.8006.1.1 | ColumnncmJapPRISecNumNIDIndex | read-only | mandatory | The object specifies the node id of the node. |
| 1.3.6.1.4.1.321.1.3038.8006.1.2 | ColumnncmJapPRISecNumLineIndex | read-only | mandatory | The index value which uniquely identifies the interface to which this entry is applicable. |
| 1.3.6.1.4.1.321.1.3038.8006.1.3 | ColumnncmJapPRISecNumIndex | read-only | mandatory | The index number of the security number. |
| 1.3.6.1.4.1.321.1.3038.8006.1.4 | ColumnncmJapPRISecNumCount | read-write | mandatory | The number of digits of the security number. |
| 1.3.6.1.4.1.321.1.3038.8006.1.5 | ColumnncmJapPRISecNumNumber | read-write | mandatory | The variable specifies the security number. |
| 1.3.6.1.4.1.321.1.3038.8007 | TablencmJapPRICallLogLineTable | not-accessible | mandatory | The PRI Call Log Line Table . |
| 1.3.6.1.4.1.321.1.3038.8007.1 | RowncmJapPRICallLogLineEntry | not-accessible | mandatory | An entry in the PRI Call Log Line Table . |
| 1.3.6.1.4.1.321.1.3038.8007.1.1 | ColumnncmJapPRICaloglinNIDIndex | read-only | mandatory | The object specifies the node id of the node. |
| 1.3.6.1.4.1.321.1.3038.8007.1.2 | ColumnncmJapPRICaloglinLineIndex | read-only | mandatory | The index value which uniquely identifies the interface to which this entry is applicable. |
| 1.3.6.1.4.1.321.1.3038.8007.1.3 | ColumnncmJapPRICaloglinLineNum | read-only | mandatory | The log line number of the log line to be displayed. |
| 1.3.6.1.4.1.321.1.3038.8007.1.4 | ColumnncmJapPRICaloglinLogLine | read-only | mandatory | The log line to be displayed. |
| 1.3.6.1.4.1.321.1.3038.8007.1.5 | ColumnncmJapPRICaloglinStatus | read-only | mandatory | The variable specifies the result of listing the call log line. |