VERILINK-ENTERPRISE-NCMM13-MIB
190 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.321.1.3037.14000 | Tablencmm13DS3PortTable | not-accessible | mandatory | The m13 DS3 Port table. |
| 1.3.6.1.4.1.321.1.3037.14000.1 | Rowncmm13DS3PortEntry | not-accessible | mandatory | An entry in the m13 information table. |
| 1.3.6.1.4.1.321.1.3037.14000.1.1 | Columnncmm13DS3PortNIDIndex | read-only | mandatory | This variable indicates the node id value of the node. |
| 1.3.6.1.4.1.321.1.3037.14000.1.2 | Columnncmm13DS3PortIndex | read-only | mandatory | The index value which uniquely identifies the DS3 interface to which this entry is applica- ble. The interface identified by a particular value of this index i… |
| 1.3.6.1.4.1.321.1.3037.14000.1.3 | Columnncmm13DS3ModeControl | read-write | mandatory | The Mode Control Bit for M13. |
| 1.3.6.1.4.1.321.1.3037.14000.1.4 | Columnncmm13DS3LineType | read-write | mandatory | The Line Type for M13. |
| 1.3.6.1.4.1.321.1.3037.14000.1.5 | Columnncmm13DS3PerfControl | read-write | mandatory | Performance Control Enabled/Disabled for M13. |
| 1.3.6.1.4.1.321.1.3037.14000.1.6 | Columnncmm13DS3AlarmControl | read-write | mandatory | Alarm Control Enabled/Disabled for M13. |
| 1.3.6.1.4.1.321.1.3037.14000.1.7 | Columnncmm13DS3FarEndControl | read-write | mandatory | Far End Control Enabled/Disabled for M13. |
| 1.3.6.1.4.1.321.1.3037.14000.1.8 | Columnncmm13DS3BusType | read-write | mandatory | Inband Control Enabled/Disabled for M13. |
| 1.3.6.1.4.1.321.1.3037.14000.1.9 | Columnncmm13DS3InbandControl | read-write | mandatory | Inband Control Enabled/Disabled for M13. |
| 1.3.6.1.4.1.321.1.3037.14000.1.10 | Columnncmm13DS3CableLength | read-write | mandatory | Cable length for M13. |
| 1.3.6.1.4.1.321.1.3037.14000.1.11 | Columnncmm13DS3EquipCode | read-write | mandatory | This is the Far End Equipment Identification code that describes the specific piece of equipment. It is sent within the Path Identification Message. |
| 1.3.6.1.4.1.321.1.3037.14000.1.12 | Columnncmm13DS3LocationIDCode | read-write | mandatory | This is the Far End Location Identification code that describes the specific location of the equipment. It is sent within the Path Identification Message. |
| 1.3.6.1.4.1.321.1.3037.14000.1.13 | Columnncmm13DS3FrameIDCode | read-write | mandatory | This is the Far End Frame Identification code that identifies where the equipment is located within a building at a given location. It is sent within the Path … |
| 1.3.6.1.4.1.321.1.3037.14000.1.14 | Columnncmm13DS3UnitCode | read-write | mandatory | This is the Far End code that identifies the equipment location within a bay. It is sent within the Path Identification Message. |
| 1.3.6.1.4.1.321.1.3037.14000.1.15 | Columnncmm13DS3FacilityIDCode | read-write | mandatory | This code identifies a specific Far End DS3 path. It is sent within the Path Identification Message. |
| 1.3.6.1.4.1.321.1.3037.14000.1.16 | Columnncmm13DS3PortIdCode | read-write | mandatory | Port ID. |
| 1.3.6.1.4.1.321.1.3037.14000.1.17 | Columnncmm13DS3GenIDCode | read-write | mandatory | Test Signal Generator ID. |
| 1.3.6.1.4.1.321.1.3037.14001 | Tablencmm13StatTable | not-accessible | mandatory | The m13 Stats. |
| 1.3.6.1.4.1.321.1.3037.14001.1 | Rowncmm13StatEntry | not-accessible | mandatory | An entry in the m13 stats table. |
| 1.3.6.1.4.1.321.1.3037.14001.1.1 | Columnncmm13StatNIDIndex | read-only | mandatory | This variable indicates the node id value of the node. |
| 1.3.6.1.4.1.321.1.3037.14001.1.2 | Columnncmm13StatIndex | read-only | mandatory | The index value which uniquely identifies the DS1 interface to which this entry is applica- ble. The interface identified by a particular value of this index i… |
| 1.3.6.1.4.1.321.1.3037.14001.1.3 | Columnncmm13StatAIS | read-only | mandatory | Port Status m13 AIS off/on. |
| 1.3.6.1.4.1.321.1.3037.14001.1.4 | Columnncmm13StatIdle | read-only | mandatory | port Status m13 Idle off/on. |
| 1.3.6.1.4.1.321.1.3037.14001.1.5 | Columnncmm13StatYellowAlm | read-only | mandatory | Port Status m13 Yellow Alarm off/on. |
| 1.3.6.1.4.1.321.1.3037.14001.1.6 | Columnncmm13StatOOF | read-only | mandatory | port status m13 off/on. |
| 1.3.6.1.4.1.321.1.3037.14001.1.7 | Columnncmm13StatLOS | read-only | mandatory | Port Status m13 LOS off/on. |
| 1.3.6.1.4.1.321.1.3037.14001.1.8 | Columnncmm13DS3NearEndLocalLoopback | read-only | mandatory | Port Status m13 Ds3 Local Loopback off/on. |
| 1.3.6.1.4.1.321.1.3037.14001.1.9 | Columnncmm13DS3NearEndLineLoopback | read-only | mandatory | Port Status m13 ds3 near end Line loopback off/on. |
| 1.3.6.1.4.1.321.1.3037.14001.1.10 | Columnncmm13DS3FarEndLineLoopback | read-only | mandatory | Port Status m13 ds3 far end line loopback off/on. |
| 1.3.6.1.4.1.321.1.3037.14001.1.11 | Columnncmm13T1NearEndLineLoopback | read-only | mandatory | Port Status m13 T1 near end line loopback. |
| 1.3.6.1.4.1.321.1.3037.14001.1.12 | Columnncmm13T1FarEndLineLoopback | read-only | mandatory | Port Status m13 T1 Far end line loopback. |
| 1.3.6.1.4.1.321.1.3037.14001.1.13 | Columnncmm13FarEndAllT1LineLoopback | read-only | mandatory | Port Status m13 T1 Far End All T1 Line Loopback. |
| 1.3.6.1.4.1.321.1.3037.14001.1.14 | Columnncmm13T1LocalLoopback | read-only | mandatory | Port Status m13 T1 Local loopback. |
| 1.3.6.1.4.1.321.1.3037.14002 | Tablencmm13CurrentTable | not-accessible | mandatory | The m13 Current table. |
| 1.3.6.1.4.1.321.1.3037.14002.1 | Rowncmm13CurrentEntry | not-accessible | mandatory | An entry in the m13 Current table. |
| 1.3.6.1.4.1.321.1.3037.14002.1.1 | Columnncmm13CurrentNIDIndex | read-only | mandatory | This variable indicates the node id value of the node. |
| 1.3.6.1.4.1.321.1.3037.14002.1.2 | Columnncmm13CurrentIndex | read-only | mandatory | The index value which uniquely identifies the m13 interface to which this entry is applicable. The interface identified by a particular value of this index is … |
| 1.3.6.1.4.1.321.1.3037.14002.1.3 | Columnncmm13CurrentCRCStatus | read-only | mandatory | Current CRC4 Status. |
| 1.3.6.1.4.1.321.1.3037.14002.1.4 | Columnncmm13CurrentTimeStampSecs | read-only | mandatory | Current Time in seconds. |
| 1.3.6.1.4.1.321.1.3037.14002.1.5 | Columnncmm13CurrentTimeStampMSecs | read-only | mandatory | Current Time in milliseconds. |
| 1.3.6.1.4.1.321.1.3037.14002.1.6 | Columnncmm13CurrentIntervalSecsElaps | read-only | mandatory | Seconds elapsed in the current interval. |
| 1.3.6.1.4.1.321.1.3037.14002.1.7 | Columnncmm13CurrentFarEndCCV | read-only | mandatory | The counter associated with the number of Far End C-bit Code Violations, in the current 15 minute interval. |
| 1.3.6.1.4.1.321.1.3037.14002.1.8 | Columnncmm13CurrentFarEndCES | read-only | mandatory | The counter associated with the number of Far End C-bit Errored Seconds, in the current 15 minute interval. |
| 1.3.6.1.4.1.321.1.3037.14002.1.9 | Columnncmm13CurrentFarEndCSES | read-only | mandatory | The counter associated with the number of Far End C-bit Severely Errored Seconds, in the current 15 minute interval. |
| 1.3.6.1.4.1.321.1.3037.14002.1.10 | Columnncmm13CurrentFarEndLUAS | read-only | mandatory | Far End Line Unavailable Seconds. The counter associated with the number of Seconds the Far End m13 interface was Out Of Service in the current 15 minute inter… |
| 1.3.6.1.4.1.321.1.3037.14002.1.11 | Columnncmm13CurrentLCV | read-only | mandatory | The counter associated with the number of Line Code Violations, a bipolar or excesive zero violation, in the current 15 minute interval. |
| 1.3.6.1.4.1.321.1.3037.14002.1.12 | Columnncmm13CurrentLES | read-only | mandatory | Line Errored Second Total. The counter associated with the number of Seconds of in which one or more LCV occurred in the current 15 minute interval. |
| 1.3.6.1.4.1.321.1.3037.14002.1.13 | Columnncmm13CurrentLSES | read-only | mandatory | The counter associated with the number of Line Severely Errored Seconds (LSES) in the current 15 minute interval. |
| 1.3.6.1.4.1.321.1.3037.14002.1.14 | Columnncmm13CurrentPCV | read-only | mandatory | The counter associated with the number of Parity Code Violations (locally calculated P-bits disagree with those received), in the current 15 minute interval. |
| 1.3.6.1.4.1.321.1.3037.14002.1.15 | Columnncmm13CurrentPES | read-only | mandatory | The counter associated with the number of Seconds having at least one Parity Code Violation, in the current 15 minute interval. |
| 1.3.6.1.4.1.321.1.3037.14002.1.16 | Columnncmm13CurrentPSES | read-only | mandatory | The counter associated with the number of Seconds having 44 or more Parity Code Violations, in the current 15 minute interval. |
| 1.3.6.1.4.1.321.1.3037.14002.1.17 | Columnncmm13CurrentCCV | read-only | mandatory | The counter associated with the number of C-bit Code Violations, in the current 15 minute interval. |
| 1.3.6.1.4.1.321.1.3037.14002.1.18 | Columnncmm13CurrentCES | read-only | mandatory | The counter associated with the number of C-bit Errored Seconds, in the current 15 minute interval. |
| 1.3.6.1.4.1.321.1.3037.14002.1.19 | Columnncmm13CurrentCSES | read-only | mandatory | The counter associated with the number of C-bit Severely Errored Seconds, in the current 15 minute interval. |
| 1.3.6.1.4.1.321.1.3037.14002.1.20 | Columnncmm13CurrentSEFS | read-only | mandatory | The counter associated with the number of seconds in which one or more Out of Frame occurred in the current 15 minute interval. |
| 1.3.6.1.4.1.321.1.3037.14002.1.21 | Columnncmm13CurrentAISS | read-only | mandatory | The counter associated with the number of Seconds in which one or more incoming AISS was detected in the current 15 minute interval. |
| 1.3.6.1.4.1.321.1.3037.14002.1.22 | Columnncmm13CurrentLUAS | read-only | mandatory | The counter associated with the number of Seconds in which one or more incoming LUAS was detected in the current 15 minute interval. |
| 1.3.6.1.4.1.321.1.3037.14002.1.23 | Columnncmm13CurrentLOOS | read-only | mandatory | The counter associated with the number of Seconds the m13 interface was Out Of Service in the current 15 minute interval. |
| 1.3.6.1.4.1.321.1.3037.14002.1.24 | Columnncmm13CurrentLOFS | read-only | mandatory | The counter associated with the number of Seconds Of system Loss Of Signal (LOS) in the current 15 minute interval. |
| 1.3.6.1.4.1.321.1.3037.14003 | Tablencmm13IntervalTable | not-accessible | mandatory | The DS3/E3 Interval table. |
| 1.3.6.1.4.1.321.1.3037.14003.1 | Rowncmm13IntervalEntry | not-accessible | mandatory | An entry in the m13 Interval table. |
| 1.3.6.1.4.1.321.1.3037.14003.1.1 | Columnncmm13IntervalNIDIndex | read-only | mandatory | This variable indicates the node id value of the node. |
| 1.3.6.1.4.1.321.1.3037.14003.1.2 | Columnncmm13IntervalIndex | read-only | mandatory | The index value which uniquely identifies the m13 interface to which this entry is applicable. The interface identified by a particular value of this index is … |
| 1.3.6.1.4.1.321.1.3037.14003.1.3 | Columnncmm13IntervalNumber | read-only | mandatory | A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes inter- val (assuming tha… |
| 1.3.6.1.4.1.321.1.3037.14003.1.4 | Columnncmm13IntervalFarEndCCV | read-only | mandatory | The counter associated with the number of Far End C-bit Code Violations, in the previous 15 minute interval. |
| 1.3.6.1.4.1.321.1.3037.14003.1.5 | Columnncmm13IntervalFarEndCES | read-only | mandatory | The counter associated with the number of Far End C-bit Errored Seconds, in the current 15 minute interval. |
| 1.3.6.1.4.1.321.1.3037.14003.1.6 | Columnncmm13IntervalFarEndCSES | read-only | mandatory | The counter associated with the number of Far End C-bit Severely Errored Seconds, in the current 15 minute interval. |
| 1.3.6.1.4.1.321.1.3037.14003.1.7 | Columnncmm13IntervalFarEndLUAS | read-only | mandatory | Far End Line Unavailable Seconds. The counter associated with the number of Seconds the Far End m13 interface was Out Of Service in the current 15 minute inter… |
| 1.3.6.1.4.1.321.1.3037.14003.1.8 | Columnncmm13IntervalLCV | read-only | mandatory | The counter associated with the number of Line Code Violations, a bipolar or excesive zero violation, in the current 15 minute interval. |
| 1.3.6.1.4.1.321.1.3037.14003.1.9 | Columnncmm13IntervalLES | read-only | mandatory | Line Errored Second Total. The counter associated with the number of Seconds of in which one or more LCV occurred in the current 15 minute interval. |
| 1.3.6.1.4.1.321.1.3037.14003.1.10 | Columnncmm13IntervalLSES | read-only | mandatory | The counter associated with the number of Line Severely Errored Seconds (LSES) in the current 15 minute interval. |
| 1.3.6.1.4.1.321.1.3037.14003.1.11 | Columnncmm13IntervalPCV | read-only | mandatory | The counter associated with the number of Parity Code Violations (locally calculated P-bits disagree with those received), in the current 15 minute interval. |
| 1.3.6.1.4.1.321.1.3037.14003.1.12 | Columnncmm13IntervalPES | read-only | mandatory | The counter associated with the number of Seconds having at least one Parity Code Violation, in the current 15 minute interval. |
| 1.3.6.1.4.1.321.1.3037.14003.1.13 | Columnncmm13IntervalPSES | read-only | mandatory | The counter associated with the number of Seconds having 44 or more Parity Code Violations, in the current 15 minute interval. |
| 1.3.6.1.4.1.321.1.3037.14003.1.14 | Columnncmm13IntervalCCV | read-only | mandatory | The counter associated with the number of C-bit Code Violations, in the current 15 minute interval. |
| 1.3.6.1.4.1.321.1.3037.14003.1.15 | Columnncmm13IntervalCES | read-only | mandatory | The counter associated with the number of C-bit Errored Seconds, in the current 15 minute interval. |
| 1.3.6.1.4.1.321.1.3037.14003.1.16 | Columnncmm13IntervalCSES | read-only | mandatory | The counter associated with the number of C-bit Severely Errored Seconds, in the current 15 minute interval. |
| 1.3.6.1.4.1.321.1.3037.14003.1.17 | Columnncmm13IntervalSEFS | read-only | mandatory | The counter associated with the number of seconds in which one or more Out of Frame occurred in the current 15 minute interval. |
| 1.3.6.1.4.1.321.1.3037.14003.1.18 | Columnncmm13IntervalAISS | read-only | mandatory | The counter associated with the number of Seconds in which one or more incoming AIS was detected in the current 15 minute interval. |
| 1.3.6.1.4.1.321.1.3037.14003.1.19 | Columnncmm13IntervalLUAS | read-only | mandatory | The counter associated with the number of Seconds the m13 interface was Out Of Service in the current 15 minute interval. |
| 1.3.6.1.4.1.321.1.3037.14003.1.20 | Columnncmm13IntervalLOSS | read-only | mandatory | The counter associated with the number of Seconds Of system Loss Of Signal (LOS) in the current 15 minute interval. |
| 1.3.6.1.4.1.321.1.3037.14003.1.21 | Columnncmm13IntervalLOFS | read-only | mandatory | The counter associated with the number of Seconds Of system Loss Of Frame (LOF) in the current 15 minute interval. |
| 1.3.6.1.4.1.321.1.3037.14004 | Tablencmm13TotalTable | not-accessible | mandatory | The m13 Total table. |
| 1.3.6.1.4.1.321.1.3037.14004.1 | Rowncmm13TotalEntry | not-accessible | mandatory | An entry in the m13 Total table. |
| 1.3.6.1.4.1.321.1.3037.14004.1.1 | Columnncmm13TotalNIDIndex | read-only | mandatory | This variable indicates the node id value of the node. |
| 1.3.6.1.4.1.321.1.3037.14004.1.2 | Columnncmm13TotalIndex | read-only | mandatory | The index value which uniquely identifies the m13 interface to which this entry is applicable. The interface identified by a particular value of this index is … |
| 1.3.6.1.4.1.321.1.3037.14004.1.3 | Columnncmm13TotalCRCStatus | read-only | mandatory | CRC4 Status. |
| 1.3.6.1.4.1.321.1.3037.14004.1.4 | Columnncmm13TotalValidInterv | read-only | mandatory | The number of valid intervals. |
| 1.3.6.1.4.1.321.1.3037.14004.1.5 | Columnncmm13TotalFarEndCCV | read-only | mandatory | The counter associated with the number of Far End C-bit Code Violations, in the last 24 hour interval. |
| 1.3.6.1.4.1.321.1.3037.14004.1.6 | Columnncmm13TotalFarEndCES | read-only | mandatory | The counter associated with the number of Far End C-bit Errored Seconds, in the last 24 hour interval. |
| 1.3.6.1.4.1.321.1.3037.14004.1.7 | Columnncmm13TotalFarEndCSES | read-only | mandatory | The counter associated with the number of Far End C-bit Severely Errored Seconds, in the last 24 hour interval. |
| 1.3.6.1.4.1.321.1.3037.14004.1.8 | Columnncmm13TotalFarEndLUAS | read-only | mandatory | Far End Line Unavailable Seconds. The counter associated with the number of Seconds the Far End m13 interface was Out Of Service in the last 24 hour interval. |
| 1.3.6.1.4.1.321.1.3037.14004.1.9 | Columnncmm13TotalLCV | read-only | mandatory | The counter associated with the number of Line Code Violations, a bipolar or excesive zero violation, in the last 24 hour interval. |
| 1.3.6.1.4.1.321.1.3037.14004.1.10 | Columnncmm13TotalLES | read-only | mandatory | Line Errored Second Total. The counter associated with the number of Seconds of in which one or more LCV occurred in the last 24 hour interval. |
| 1.3.6.1.4.1.321.1.3037.14004.1.11 | Columnncmm13TotalLSES | read-only | mandatory | The counter associated with the number of Seconds Of Line Severely Errored Seconds (LSES) in the last 24 hour interval. |
| 1.3.6.1.4.1.321.1.3037.14004.1.12 | Columnncmm13TotalPCV | read-only | mandatory | The counter associated with the number of Parity Code Violations (locally calculated P-bits disagree with those received), in the last 24 hour interval. |
| 1.3.6.1.4.1.321.1.3037.14004.1.13 | Columnncmm13TotalPES | read-only | mandatory | The counter associated with the number of Seconds having at least one Parity Code Violation, in the last 24 hour interval. |
| 1.3.6.1.4.1.321.1.3037.14004.1.14 | Columnncmm13TotalPSES | read-only | mandatory | The counter associated with the number of Seconds having 44 or more Parity Code Violations, in the last 24 hour interval. |
| 1.3.6.1.4.1.321.1.3037.14004.1.15 | Columnncmm13TotalCCV | read-only | mandatory | The counter associated with the number of C-bit Code Violations, in the last 24 hour interval. |
| 1.3.6.1.4.1.321.1.3037.14004.1.16 | Columnncmm13TotalCES | read-only | mandatory | The counter associated with the number of C-bit Errored Seconds, in the last 24 hour interval. |
| 1.3.6.1.4.1.321.1.3037.14004.1.17 | Columnncmm13TotalCSES | read-only | mandatory | The counter associated with the number of C-bit Severely Errored Seconds, in the last 24 hour interval. |
| 1.3.6.1.4.1.321.1.3037.14004.1.18 | Columnncmm13TotalSEFS | read-only | mandatory | The counter associated with the number of seconds in which one or more Out of Frame occurred in the last 24 hour interval. |
| 1.3.6.1.4.1.321.1.3037.14004.1.19 | Columnncmm13TotalAISS | read-only | mandatory | The counter associated with the number of Seconds in which one or more incoming AIS was detected in the last 24 hour interval. |
| 1.3.6.1.4.1.321.1.3037.14004.1.20 | Columnncmm13TotalLUAS | read-only | mandatory | The counter associated with the number of Seconds the m13 interface was Out Of Service in the last 24 hour interval. |
| 1.3.6.1.4.1.321.1.3037.14004.1.21 | Columnncmm13TotalLOSS | read-only | mandatory | The counter associated with the number of Seconds Of system Loss Of Signal (LOS) in the last 24 hour interval. |
| 1.3.6.1.4.1.321.1.3037.14004.1.22 | Columnncmm13TotalLOFS | read-only | mandatory | The counter associated with the number of Seconds Of system Loss Of Frame (LOF) in the last 24 hour interval. |
| 1.3.6.1.4.1.321.1.3037.14005 | Tablencmm13PerformanceSnapShotTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.321.1.3037.14005.1 | Rowncmm13PerformanceSnapShotEntry | not-accessible | mandatory | An entry in the m13 Performance Snap Shot Entry table. |
| 1.3.6.1.4.1.321.1.3037.14005.1.1 | Columnncmm13SnapShotNIDIndex | read-only | mandatory | The object specifies the node id index of the node. |
| 1.3.6.1.4.1.321.1.3037.14005.1.2 | Columnncmm13SnapShotIndex | read-only | mandatory | The index value which uniquely identifies the m13 interface to which this entry is applica- ble. The interface identified by a particular value of this index i… |
| 1.3.6.1.4.1.321.1.3037.14005.1.3 | Columnncmm13SnapShotCRCStatus | read-only | mandatory | CRC4 Status. |
| 1.3.6.1.4.1.321.1.3037.14005.1.4 | Columnncmm13SnapShot | read-write | mandatory | The variable specifies the option to initiate snap shot command. |
| 1.3.6.1.4.1.321.1.3037.14005.1.5 | Columnncmm13TimeStampSec | read-only | mandatory | The variable specifies the Time Stamp in Seconds . |
| 1.3.6.1.4.1.321.1.3037.14005.1.6 | Columnncmm13TimeStampMilliSec | read-only | mandatory | The variable specifies the Time Stamp in milli Seconds . |
| 1.3.6.1.4.1.321.1.3037.14005.1.7 | Columnncmm13SnapShotSecs | read-only | mandatory | The variable specifies number of seconds in the current interval. |
| 1.3.6.1.4.1.321.1.3037.14005.1.8 | Columnncmm13ResetPerfReg | read-write | mandatory | Reset Performance Monitoring registers. |
| 1.3.6.1.4.1.321.1.3037.14006 | Tablencmm13TCAQtrTable | not-accessible | mandatory | The quarter hour Alert Threshold Table. |
| 1.3.6.1.4.1.321.1.3037.14006.1 | Rowncmm13TCAQtrEntry | not-accessible | mandatory | An entry in the m13 table. |
| 1.3.6.1.4.1.321.1.3037.14006.1.1 | Columnncmm13TCAQtrNIDIndex | read-only | mandatory | This variable indicates the node id value of the node. |
| 1.3.6.1.4.1.321.1.3037.14006.1.2 | Columnncmm13TCAQtrIndex | read-only | mandatory | The index value which uniquely identifies the alert crossing threshold interface to which this entry is applicable. The interface identified by a particular va… |
| 1.3.6.1.4.1.321.1.3037.14006.1.3 | Columnncmm13TCAQtrFarEndCCV | read-write | mandatory | The performance alert threshold for m13 layer Far End C-bit Code Violation in 1/4 hour boundary. |
| 1.3.6.1.4.1.321.1.3037.14006.1.4 | Columnncmm13TCAQtrFarEndCES | read-write | mandatory | The performance alert threshold for m13 Far End C-bit Errored Seconds, in 1/4 hour boundary. |
| 1.3.6.1.4.1.321.1.3037.14006.1.5 | Columnncmm13TCAQtrFarEndCSES | read-write | mandatory | The performance alert threshold for m13 Far End C-bit Severely Errored Seconds, in 1/4 hour boundary. |
| 1.3.6.1.4.1.321.1.3037.14006.1.6 | Columnncmm13TCAQtrFarEndLUAS | read-write | mandatory | The performance alert threshold for m13 layer Far End Line Unavailable Seconds in 1/4 hour boundary. |
| 1.3.6.1.4.1.321.1.3037.14006.1.7 | Columnncmm13TCAQtrLCV | read-write | mandatory | The performance alert threshold for m13 layer Line code Violation in 1/4 hour boundary. |
| 1.3.6.1.4.1.321.1.3037.14006.1.8 | Columnncmm13TCAQtrLES | read-write | mandatory | The performance alert threshold for m13 layer Line Errored Second in 1/4 hour boundary. |
| 1.3.6.1.4.1.321.1.3037.14006.1.9 | Columnncmm13TCAQtrLSES | read-write | mandatory | The performance alert threshold for m13 layer Line Severely Errored Second in 1/4 hour boundary. |
| 1.3.6.1.4.1.321.1.3037.14006.1.10 | Columnncmm13TCAQtrPCV | read-write | mandatory | The performance alert threshold for m13 layer Parity Code Violation in 1/4 hour boundary. |
| 1.3.6.1.4.1.321.1.3037.14006.1.11 | Columnncmm13TCAQtrPES | read-write | mandatory | The performance alert threshold for m13 layer Parity Errored Second in 1/4 hour boundary. |
| 1.3.6.1.4.1.321.1.3037.14006.1.12 | Columnncmm13TCAQtrPSES | read-write | mandatory | The performance alert threshold for m13 layer Parity Severely Errored Second in 1/4 hour boundary. |
| 1.3.6.1.4.1.321.1.3037.14006.1.13 | Columnncmm13TCAQtrCCV | read-write | mandatory | The performance alert threshold for m13 layer C-bit Code Violation in 1/4 hour boundary. |
| 1.3.6.1.4.1.321.1.3037.14006.1.14 | Columnncmm13TCAQtrCES | read-write | mandatory | The performance alert threshold for m13 Far End C-bit Errored Seconds, layer Errored Second in 1/4 hour boundary. |
| 1.3.6.1.4.1.321.1.3037.14006.1.15 | Columnncmm13TCAQtrCSES | read-write | mandatory | The performance alert threshold for m13 layer C-bit Severely Errored Second in 1/4 hour boundary. |
| 1.3.6.1.4.1.321.1.3037.14006.1.16 | Columnncmm13TCAQtrSEFS | read-write | mandatory | The performance alert threshold for m13 layer Severely Errored Framing Seconds in 1/4 hour boundary. |
| 1.3.6.1.4.1.321.1.3037.14006.1.17 | Columnncmm13TCAQtrAISS | read-write | mandatory | The performance alert threshold for m13 layer Alarm Indication Signal Second in 1/4 hour boundary. |
| 1.3.6.1.4.1.321.1.3037.14006.1.18 | Columnncmm13TCAQtrLUAS | read-write | mandatory | The performance alert threshold for m13 layer Unavailable Second in 1/4 hour boundary. |
| 1.3.6.1.4.1.321.1.3037.14006.1.19 | Columnncmm13TCAQtrLOSS | read-write | mandatory | The performance alert threshold for m13 Loss of Signal (LOS) Seconds in 1/4 hour boundary. |
| 1.3.6.1.4.1.321.1.3037.14006.1.20 | Columnncmm13TCAQtrLOFS | read-write | mandatory | The performance alert threshold for m13 Loss of Frame (LOF) Seconds in 1/4 hour boundary. |
| 1.3.6.1.4.1.321.1.3037.14007 | Tablencmm13TCADayTable | not-accessible | mandatory | The 24 hour m13 Alert Threshold Table. |
| 1.3.6.1.4.1.321.1.3037.14007.1 | Rowncmm13TCADayEntry | not-accessible | mandatory | An entry in the 24 hour m13 Alert Threshold Table. |
| 1.3.6.1.4.1.321.1.3037.14007.1.1 | Columnncmm13TCADayNIDIndex | read-only | mandatory | This variable indicates the node id value of the node. |
| 1.3.6.1.4.1.321.1.3037.14007.1.2 | Columnncmm13TCADayIndex | read-only | mandatory | The index value which uniquely identifies the alert crossing threshold interface to which this entry is applicable. The interface identified by a particular va… |
| 1.3.6.1.4.1.321.1.3037.14007.1.3 | Columnncmm13TCADayFarEndCCV | read-write | mandatory | The performance alert threshold for m13 layer Far End C-bit Code Violation in 24 hour boundary. |
| 1.3.6.1.4.1.321.1.3037.14007.1.4 | Columnncmm13TCADayFarEndCES | read-write | mandatory | The performance alert threshold for m13 Far End C-bit Errored Seconds, in 24 hour boundary. |
| 1.3.6.1.4.1.321.1.3037.14007.1.5 | Columnncmm13TCADayFarEndCSES | read-write | mandatory | The performance alert threshold for m13 Far End C-bit Severely Errored Seconds, in 24 hour boundary. |
| 1.3.6.1.4.1.321.1.3037.14007.1.6 | Columnncmm13TCADayFarEndLUAS | read-write | mandatory | The performance alert threshold for m13 layer Far End Line Unavailable Seconds in 24 hour boundary. |
| 1.3.6.1.4.1.321.1.3037.14007.1.7 | Columnncmm13TCADayLCV | read-write | mandatory | The performance alert threshold for m13 layer Line code Violation in 24 hour boundary. |
| 1.3.6.1.4.1.321.1.3037.14007.1.8 | Columnncmm13TCADayLES | read-write | mandatory | The performance alert threshold for m13 layer Line Errored Second in 24 hour boundary. |
| 1.3.6.1.4.1.321.1.3037.14007.1.9 | Columnncmm13TCADayLSES | read-write | mandatory | The performance alert threshold for m13 layer Line Severely Errored Second in 24 hour boundary. |
| 1.3.6.1.4.1.321.1.3037.14007.1.10 | Columnncmm13TCADayPCV | read-write | mandatory | The performance alert threshold for m13 layer Parity Code Violation in 24 hour boundary. |
| 1.3.6.1.4.1.321.1.3037.14007.1.11 | Columnncmm13TCADayPES | read-write | mandatory | The performance alert threshold for m13 layer Parity Errored Second in 24 hour boundary. |
| 1.3.6.1.4.1.321.1.3037.14007.1.12 | Columnncmm13TCADayPSES | read-write | mandatory | The performance alert threshold form 13 layer Parity Severely Errored Second in 24 hour boundary. |
| 1.3.6.1.4.1.321.1.3037.14007.1.13 | Columnncmm13TCADayCCV | read-write | mandatory | The performance alert threshold for m13 layer C-bit Code Violation in 24 hour boundary. |
| 1.3.6.1.4.1.321.1.3037.14007.1.14 | Columnncmm13TCADayCES | read-write | mandatory | The performance alert threshold for m13 C-bit Errored Seconds, in 24 hour boundary. |
| 1.3.6.1.4.1.321.1.3037.14007.1.15 | Columnncmm13TCADayCSES | read-write | mandatory | The performance alert threshold for DS3 C-bit Severely Errored Seconds, in 24 hour boundary. |
| 1.3.6.1.4.1.321.1.3037.14007.1.16 | Columnncmm13TCADaySEFS | read-write | mandatory | The performance alert threshold for m13 layer Severely Errored Framing Seconds in 24 hour boundary. |
| 1.3.6.1.4.1.321.1.3037.14007.1.17 | Columnncmm13TCADayAISS | read-write | mandatory | The performance alert threshold for m13 layer Alarm Indication Signal Second in 24 hour boundary. |
| 1.3.6.1.4.1.321.1.3037.14007.1.18 | Columnncmm13TCADayLUAS | read-write | mandatory | The performance alert threshold for m13 layer Unavailable Second in 24 hour boundary. |
| 1.3.6.1.4.1.321.1.3037.14007.1.19 | Columnncmm13TCADayLOSS | read-write | mandatory | The performance alert threshold for m13 Loss of Signal (LOS) Seconds in 24 hour boundary. |
| 1.3.6.1.4.1.321.1.3037.14007.1.20 | Columnncmm13TCADayLOFS | read-write | mandatory | The performance alert threshold for m13 Loss of Frame (LOF) Seconds in 24 hour boundary. |
| 1.3.6.1.4.1.321.1.3037.14008 | Tablencmm13TxAlarmTable | not-accessible | mandatory | m13 Transmit alarm Table. |
| 1.3.6.1.4.1.321.1.3037.14008.1 | Rowncmm13TxAlarmEntry | not-accessible | mandatory | An entry in the m13 Transmit Alarm table. |
| 1.3.6.1.4.1.321.1.3037.14008.1.1 | Columnncmm13TxAlarmNIDIndex | read-only | mandatory | This variable indicates the node id value of the node. |
| 1.3.6.1.4.1.321.1.3037.14008.1.2 | Columnncmm13TxAlarmIndex | read-only | mandatory | The index value which uniquely identifies the Transmit Alarm interface to which this entry is applicable. The interface identified by a particular value of thi… |
| 1.3.6.1.4.1.321.1.3037.14008.1.3 | Columnncmm13TxYellowAlarm | read-write | mandatory | Transmit the near-end yellow alarm for m13. |
| 1.3.6.1.4.1.321.1.3037.14008.1.4 | Columnncmm13TxAIS | read-write | mandatory | Transmit the near-end AIS alarm for m13. |
| 1.3.6.1.4.1.321.1.3037.14008.1.5 | Columnncmm13TxIdleSignal | read-write | mandatory | Transmit the near-end Idle alarm for m13. |
| 1.3.6.1.4.1.321.1.3037.14008.1.6 | Columnncmm13TxFEBE | read-write | mandatory | Near end unit transmits the FEBE alarm for m13. |
| 1.3.6.1.4.1.321.1.3037.14008.1.7 | Columnncmm13TxFEACAlarm | read-write | mandatory | This object describes which, if any, FEAC Alarm is enabled. |
| 1.3.6.1.4.1.321.1.3037.14009 | Tablencmm13DS3LPBKTable | not-accessible | mandatory | The m13 DS3 Loopback table. |
| 1.3.6.1.4.1.321.1.3037.14009.1 | Rowncmm13DS3LPBKEntry | not-accessible | mandatory | An entry in the m13 Loopback table. |
| 1.3.6.1.4.1.321.1.3037.14009.1.1 | Columnncmm13DS3LPBKNIDIndex | read-only | mandatory | This variable indicates the node id value of the node. |
| 1.3.6.1.4.1.321.1.3037.14009.1.2 | Columnncmm13DS3LPBKIndex | read-only | mandatory | The index value which uniquely identifies the m13 interface to which this entry is applicable. The interface identified by a particular value of this index is … |
| 1.3.6.1.4.1.321.1.3037.14009.1.3 | Columnncmm13DS3LPBKAction | read-write | mandatory | m13 DS3 Loopback Activation/Deactivation. |
| 1.3.6.1.4.1.321.1.3037.14010 | Tablencmm13T1LPBKTable | not-accessible | mandatory | The m13 Loopback table. |
| 1.3.6.1.4.1.321.1.3037.14010.1 | Rowncmm13T1LPBKEntry | not-accessible | mandatory | An entry in the m13 Loopback table. |
| 1.3.6.1.4.1.321.1.3037.14010.1.1 | Columnncmm13T1LPBKNIDIndex | read-only | mandatory | This variable indicates the node id value of the node. |
| 1.3.6.1.4.1.321.1.3037.14010.1.2 | Columnncmm13T1LPBKIndex | read-only | mandatory | The index value which uniquely identifies the m13 interface to which this entry is applicable. The interface identified by a particular value of this index is … |
| 1.3.6.1.4.1.321.1.3037.14010.1.3 | Columnncmm13T1LPBKAction | read-write | mandatory | m13 Loopback Activate if Line Type = 0 (DS3 Loopback) 1 No Active 2 Local Loopback 3 Line Loopback 4 FEAC Far End 5 Inband Far End if Line Type = 1 (T1 Line Co… |
| 1.3.6.1.4.1.321.1.3037.14011 | Tablencmm13T1ConfigTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.321.1.3037.14011.1 | Rowncmm13T1ConfigEntry | not-accessible | mandatory | An entry in the ncm m13 T1 Configuration table. |
| 1.3.6.1.4.1.321.1.3037.14011.1.1 | Columnncmm13T1ConfigNIDIndex | read-only | mandatory | This object is the identifier of the node id index. |
| 1.3.6.1.4.1.321.1.3037.14011.1.2 | Columnncmm13T1LineIndex | read-only | mandatory | This object is the identifier of a Inter- f on a managed device. If there is an ifEn- try that is directly associated with this and only this m13 interface, it… |
| 1.3.6.1.4.1.321.1.3037.14011.1.3 | Columnncmm13T1FramingFormat | read-write | mandatory | This variable indicates the variety of Line implementing this circuit. The type of circuit affects the number of bits per second that the circuit can reasonabl… |
| 1.3.6.1.4.1.321.1.3037.14011.1.4 | Columnncmm13T1LineCoding | read-write | mandatory | This variable describes the variety of Zero Code Suppression used on the link, which in turn affects a number of its characteristics. B8ZS refers to the use of… |
| 1.3.6.1.4.1.321.1.3037.14011.1.5 | Columnncmm13T1EnableNetOnesDensity | read-write | mandatory | The variable specifies the Disable/Enable of the Network One's Density. |
| 1.3.6.1.4.1.321.1.3037.14011.1.6 | Columnncmm13T1DensityPattern | read-write | mandatory | This variable indicates what type of density network is being sent on the port or line by the device. The values mean : 'Disabled' refers to no network ones de… |
| 1.3.6.1.4.1.321.1.3037.14011.1.7 | Columnncmm13T1PortService | read-write | mandatory | The variable specifies whether port state is in service or not. |