VERILINK-ENTERPRISE-NCMQUAD-MIB
103 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC1155-SMI | enterprises Gauge OBJECT-TYPE |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.321 | Nodeverilink | |||
| 1.3.6.1.4.1.321.1 | Nodeas2000 | |||
| 1.3.6.1.4.1.321.1.3009 | Nodencm-quad | |||
| 1.3.6.1.4.1.321.1.3009.11000 | TablencmquadConfigTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.321.1.3009.11000.1 | RowncmquadConfigEntry | not-accessible | mandatory | An entry in the QUAD Configuration table. |
| 1.3.6.1.4.1.321.1.3009.11000.1.1 | ColumnncmquadLineIndex | read-only | mandatory | This object is the identifier of a Inter- face on a managed device. If there is an ifEn- try that is directly associated with this and only this DS1 interface,… |
| 1.3.6.1.4.1.321.1.3009.11000.1.2 | ColumnncmquadIfIndex | read-only | mandatory | This value for this object is equal to the value of ifIndex from the Interfaces table of MIB II (RFC 1213). |
| 1.3.6.1.4.1.321.1.3009.11000.1.3 | ColumnncmquadEndId | read-only | mandatory | This value for this object indicates which end of the equipment it is configuring. |
| 1.3.6.1.4.1.321.1.3009.11000.1.4 | ColumnncmquadPort | read-write | mandatory | This variable indicates Whether the port is in service or out of service |
| 1.3.6.1.4.1.321.1.3009.11000.1.5 | ColumnncmquadLineType | read-write | mandatory | This variable indicates the variety of Line implementing this circuit. The type of circuit affects the number of bits per second that the circuit can reasonabl… |
| 1.3.6.1.4.1.321.1.3009.11000.1.6 | ColumnncmquadLineCoding | read-write | mandatory | This variable describes the variety of Zero Code Suppression used on the link, which in turn affects a number of its characteristics. B8ZS refers to the use of… |
| 1.3.6.1.4.1.321.1.3009.11000.1.7 | ColumnncmquadFDL | read-write | mandatory | The variable specifies the Disable/Enable of the ncmfdl State. |
| 1.3.6.1.4.1.321.1.3009.11000.1.8 | ColumnncmquadDensityPattern | read-write | mandatory | This variable indicates what type of density network is being sent on the port or line by the device. The values mean : 'Disabled' refers to no network ones de… |
| 1.3.6.1.4.1.321.1.3009.11000.1.9 | ColumnncmquadNetworkLineBuildOut | read-write | mandatory | This variable indicates the db rate at which the line or port using, i.e., is 0 , -7.5db, -15db or -22.5db.[pvt] |
| 1.3.6.1.4.1.321.1.3009.11000.1.10 | ColumnncmquadNetworkLoopConfig | read-write | mandatory | This variable represents whether the device can be configured throught the network for loopback. Here values mean : Disabled: This device cannot be loopbacked … |
| 1.3.6.1.4.1.321.1.3009.11000.1.11 | ColumnncmquadLineStatus | read-only | mandatory | This variable indicates the Line Status of the interface. It contains loopback, failure, re- ceived 'alarm' and transmitted 'alarm' infor- mation. NoAlarms Thi… |
| 1.3.6.1.4.1.321.1.3009.11000.1.12 | ColumnncmquadLoopbackConfig | read-write | mandatory | This variable represents the loopback confi- guration of the DS1 interface. Agents support- ing read/write access should return badValue in response to a reque… |
| 1.3.6.1.4.1.321.1.3009.11000.1.13 | ColumnncmquadSendCode | read-write | mandatory | This variable indicates what type of code is being sent across the DS1 interface by the dev- ice. The values mean: NoCode sending looped or normal data QRSS se… |
| 1.3.6.1.4.1.321.1.3009.11000.1.14 | ColumnncmquadResetPerfReg | read-write | mandatory | Reset Performance Monitoring registers. |
| 1.3.6.1.4.1.321.1.3009.11000.1.15 | ColumnncmquadValidIntervals | read-only | mandatory | The number of previous intervals for which valid data was collected. The value will be 96 unless the interface was brought on-line within the last 24 hours, in… |
| 1.3.6.1.4.1.321.1.3009.11000.1.16 | ColumnncmquadTimeElapsed | read-only | mandatory | The number of seconds that have elapsed since the beginning of the current error-measurement period. |
| 1.3.6.1.4.1.321.1.3009.11000.1.17 | ColumnncmquadResetT1Error | read-write | mandatory | This variable indicates the option for reseting the T1 error counters. |
| 1.3.6.1.4.1.321.1.3009.11001 | TablencmquadLossCurrentTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.321.1.3009.11001.1 | RowncmquadLCurrentEntry | not-accessible | mandatory | An entry in the Loss Current table. |
| 1.3.6.1.4.1.321.1.3009.11001.1.1 | ColumnncmquadLCurrentIndex | read-only | mandatory | The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the … |
| 1.3.6.1.4.1.321.1.3009.11001.1.2 | ColumnncmquadCurrentEndId | read-only | mandatory | This value for this object indicates which end of the equipment it is acessing. |
| 1.3.6.1.4.1.321.1.3009.11001.1.3 | ColumnncmquadLCurrentASs | read-only | mandatory | The number of Availabe Seconds, encountered by a DS1 interface in the current 15 minute inter- val. Remark: Available Seconds does not support for QUAD 2164. |
| 1.3.6.1.4.1.321.1.3009.11001.1.4 | ColumnncmquadLCurrentLOSs | read-only | mandatory | The number of Loss Of Signal Seconds encoun- tered by a DS1 interface in the current 15 minute interval. |
| 1.3.6.1.4.1.321.1.3009.11001.1.5 | ColumnncmquadLCurrentAISs | read-only | mandatory | The number of Alarm indication Signal Seconds encountered by a DS1 interface in the current 15 minute interval. |
| 1.3.6.1.4.1.321.1.3009.11001.1.6 | ColumnncmquadLCurrentLOFs | read-only | mandatory | The number of Loss of Frame Seconds encountered by a DS1 interface in the current 15 minute in- terval. |
| 1.3.6.1.4.1.321.1.3009.11001.1.7 | ColumnncmquadLCurrentOFs | read-only | mandatory | The number of Out of Frame Seconds encountered by a DS1 interface in the current 15 minute in- terval. |
| 1.3.6.1.4.1.321.1.3009.11001.1.8 | ColumnncmquadLCurrentESs | read-only | mandatory | The number of Errored Seconds encountered by a DS1 interface in the current 15 minute in- terval. |
| 1.3.6.1.4.1.321.1.3009.11001.1.9 | ColumnncmquadLCurrentSESs | read-only | mandatory | The number of Severely Errored Seconds encountered by a DS1 interface in the current 15 minute in- terval. |
| 1.3.6.1.4.1.321.1.3009.11001.1.10 | ColumnncmquadLCurrentSEFs | read-only | mandatory | The number of Severely Errored Framing Seconds encountered by a DS1 interface in the current 15 minute in- terval. |
| 1.3.6.1.4.1.321.1.3009.11001.1.11 | ColumnncmquadLCurrentUASs | read-only | mandatory | The number of Out of Unavailable Seconds encountered by a DS1 interface in the current 15 minute in- terval. |
| 1.3.6.1.4.1.321.1.3009.11001.1.12 | ColumnncmquadLCurrentBESs | read-only | mandatory | The number of Bursty Errored Seconds encountered by a DS1 interface in the current 15 minute in- terval. |
| 1.3.6.1.4.1.321.1.3009.11001.1.13 | ColumnncmquadLCurrentESAs | read-only | mandatory | The number of ESAs encountered by a DS1 interface in the current 15 minute in- terval. |
| 1.3.6.1.4.1.321.1.3009.11001.1.14 | ColumnncmquadLCurrentSASs | read-only | mandatory | The number of SASs encountered by a DS1 interface in the current 15 minute in- terval. |
| 1.3.6.1.4.1.321.1.3009.11001.1.15 | ColumnncmquadLCurrentCSSs | read-only | mandatory | The number of CSSs encountered by a DS1 interface in the current 15 minute in- terval. |
| 1.3.6.1.4.1.321.1.3009.11001.1.16 | ColumnncmquadLCurrentLOFCs | read-only | mandatory | The number of LOFCs encountered by a DS1 interface in the current 15 minute in- terval. |
| 1.3.6.1.4.1.321.1.3009.11002 | TablencmquadLossIntervalTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.321.1.3009.11002.1 | RowncmquadLIntervalEntry | not-accessible | mandatory | An entry in the Loss Interval table. |
| 1.3.6.1.4.1.321.1.3009.11002.1.1 | ColumnncmquadLIntervalIndex | read-only | mandatory | The index value which uniquely identifies the DS1 interface to which this entry is applica- ble. The interface identified by a particular value of this index i… |
| 1.3.6.1.4.1.321.1.3009.11002.1.2 | ColumnncmquadLIntervalEndId | read-only | mandatory | This value for this object indicates which end of the equipment it is accessing. |
| 1.3.6.1.4.1.321.1.3009.11002.1.3 | ColumnncmquadLIntervalNumber | read-only | mandatory | A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes inter- val (assuming tha… |
| 1.3.6.1.4.1.321.1.3009.11002.1.4 | ColumnncmquadLIntervalASs | read-only | mandatory | The number of Available Seconds encountered by a DS1 interface in one of the previous 96, indi- vidual 15 minute, intervals. Remark: Available Seconds does not… |
| 1.3.6.1.4.1.321.1.3009.11002.1.5 | ColumnncmquadLIntervalLOSs | read-only | mandatory | The number of Loss of Signal Seconds encoun- tered by a DS1 interface in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.321.1.3009.11002.1.6 | ColumnncmquadLIntervalAISs | read-only | mandatory | The number of Alarm Indication Signal Seconds encountered by a DS1 interface in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.321.1.3009.11002.1.7 | ColumnncmquadLIntervalLOFs | read-only | mandatory | The number of Loss Of Frame Seconds encountered by a DS1 interface in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.321.1.3009.11002.1.8 | ColumnncmquadLIntervalOFs | read-only | mandatory | The number of Out Of Frame Seconds encoun- tered by a DS1 interface in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.321.1.3009.11002.1.9 | ColumnncmquadLIntervalESs | read-only | mandatory | The number of Error Seconds encoun- tered by a DS1 interface in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.321.1.3009.11002.1.10 | ColumnncmquadLIntervalSESs | read-only | mandatory | The number of Severe Error Seconds encoun- tered by a DS1 interface in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.321.1.3009.11002.1.11 | ColumnncmquadLIntervalSEFs | read-only | mandatory | The number of Severly Errored Frame Seconds encoun- tered by a DS1 interface in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.321.1.3009.11002.1.12 | ColumnncmquadLIntervalUASs | read-only | mandatory | The number of Unavailable Seconds encoun- tered by a DS1 interface in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.321.1.3009.11002.1.13 | ColumnncmquadLIntervalBESs | read-only | mandatory | The number of Bursty Error Seconds encoun- tered by a DS1 interface in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.321.1.3009.11002.1.14 | ColumnncmquadLIntervalESAs | read-only | mandatory | The number of ESAs Seconds encoun- tered by a DS1 interface in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.321.1.3009.11002.1.15 | ColumnncmquadLIntervalSASs | read-only | mandatory | The number of SASs encoun- tered by a DS1 interface in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.321.1.3009.11002.1.16 | ColumnncmquadLIntervalCSSs | read-only | mandatory | The number of CSSs encoun- tered by a DS1 interface in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.321.1.3009.11002.1.17 | ColumnncmquadLIntervalLOFCs | read-only | mandatory | The number of LOFCs encoun- tered by a DS1 interface in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.321.1.3009.11003 | TablencmquadLossTotalTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.321.1.3009.11003.1 | RowncmquadLTotalEntry | not-accessible | mandatory | An entry in the DS1 Total Loss table. |
| 1.3.6.1.4.1.321.1.3009.11003.1.1 | ColumnncmquadLTotalIndex | read-only | mandatory | The index value which uniquely identifies the DS1 interface to which this entry is applica- ble. The interface identified by a particular value of this index i… |
| 1.3.6.1.4.1.321.1.3009.11003.1.2 | ColumnncmquadTotalEndId | read-only | mandatory | This value for this object indicates which end of the equipment it is accessing. |
| 1.3.6.1.4.1.321.1.3009.11003.1.3 | ColumnncmquadLTotalASs | read-only | mandatory | The number of Available Seconds encountered by a DS1 interface in the previous 24 hour interval. Remark: Available Seconds does not support for QUAD 2164. |
| 1.3.6.1.4.1.321.1.3009.11003.1.4 | ColumnncmquadLTotalLOSs | read-only | mandatory | The number of Loss Of Signal Seconds encoun- tered by a DS1 interface in the previous 24 hour interval. |
| 1.3.6.1.4.1.321.1.3009.11003.1.5 | ColumnncmquadLTotalAISs | read-only | mandatory | The number of Alarm Indication Signal Seconds encountered by a DS1 interface in the previous 24 hour interval. |
| 1.3.6.1.4.1.321.1.3009.11003.1.6 | ColumnncmquadLTotalLOFs | read-only | mandatory | The number of Loss Of Frame Seconds encountered by a DS1 interface in the previous 24 hour in- terval. |
| 1.3.6.1.4.1.321.1.3009.11003.1.7 | ColumnncmquadLTotalOFs | read-only | mandatory | The number of Controlled Slip Seconds encoun- tered by a DS1 interface in the previous 24 hour interval. |
| 1.3.6.1.4.1.321.1.3009.11003.1.8 | ColumnncmquadLTotalESs | read-only | mandatory | The number of Errored Seconds encoun- tered by a DS1 interface in the previous 24 hour interval. |
| 1.3.6.1.4.1.321.1.3009.11003.1.9 | ColumnncmquadLTotalSESs | read-only | mandatory | The number of Severly Errored Seconds encoun- tered by a DS1 interface in the previous 24 hour interval. |
| 1.3.6.1.4.1.321.1.3009.11003.1.10 | ColumnncmquadLTotalSEFs | read-only | mandatory | The number of Severly Errored Frame Seconds encoun- tered by a DS1 interface in the previous 24 hour interval. |
| 1.3.6.1.4.1.321.1.3009.11003.1.11 | ColumnncmquadLTotalUASs | read-only | mandatory | The number of Unavailable Seconds encoun- tered by a DS1 interface in the previous 24 hour interval. |
| 1.3.6.1.4.1.321.1.3009.11003.1.12 | ColumnncmquadLTotalBESs | read-only | mandatory | The number of Bursty Errored Seconds encoun- tered by a DS1 interface in the previous 24 hour interval. |
| 1.3.6.1.4.1.321.1.3009.11003.1.13 | ColumnncmquadLTotalESAs | read-only | mandatory | The number of ESAs Seconds encoun- tered by a DS1 interface in the previous 24 hour interval. |
| 1.3.6.1.4.1.321.1.3009.11003.1.14 | ColumnncmquadLTotalSASs | read-only | mandatory | The number of SASs encoun- tered by a DS1 interface in the previous 24 hour interval. |
| 1.3.6.1.4.1.321.1.3009.11003.1.15 | ColumnncmquadLTotalCSSs | read-only | mandatory | The number of CSSs Seconds encoun- tered by a DS1 interface in the previous 24 hour interval. |
| 1.3.6.1.4.1.321.1.3009.11003.1.16 | ColumnncmquadLTotalLOFCs | read-only | mandatory | The number of LOFCs Seconds encoun- tered by a DS1 interface in the previous 24 hour interval. |
| 1.3.6.1.4.1.321.1.3009.11004 | TablencmadvancedT1ConfigTable | not-accessible | mandatory | The ncmadvanced T1 Configuration table. |
| 1.3.6.1.4.1.321.1.3009.11004.1 | RowncmadvancedT1ConfigEntry | not-accessible | mandatory | An entry in the ncmadvanced T1 Configuration table. |
| 1.3.6.1.4.1.321.1.3009.11004.1.1 | ColumnncmadvancedT1LineIndex | read-only | mandatory | The index value which uniquely identifies the interface to which this entry is applicable. |
| 1.3.6.1.4.1.321.1.3009.11004.1.2 | ColumnncmportIdentifier | read-write | mandatory | The variable specifies the port identifier and port_3 and port_4 are for Quad T1 only. |
| 1.3.6.1.4.1.321.1.3009.11004.1.3 | ColumnncmfdlMode | read-write | mandatory | The variable specifies the ncmfdl mode which is bit 0 of ncmfdl Parameter1. |
| 1.3.6.1.4.1.321.1.3009.11004.1.4 | ColumnncmfdlStandard | read-write | mandatory | The variable specifies the ncmfdl standard which is bits 1 and bit 2 of ncmfdl Parameter1. |
| 1.3.6.1.4.1.321.1.3009.11004.1.5 | ColumnncmfdlPerformanceReport | read-write | mandatory | The variable specifies the ncmfdl standard which is bits 3 and bit 4 of ncmfdl Parameter1. |
| 1.3.6.1.4.1.321.1.3009.11004.1.6 | ColumnncmfdlLBEnableDisable | read-write | mandatory | The variable specifies the Disable/Enable of the ncmfdl Loopback which is bit 0 of the ncmfdl_loop |
| 1.3.6.1.4.1.321.1.3009.11004.1.7 | ColumnncmfdlLLBT1BOPMsg | read-write | mandatory | The variable specifies the Disable/Enable of the send/receive of the LLB T1.403 BOP Messages. It is the bit 1 of the ncmfdl_loop |
| 1.3.6.1.4.1.321.1.3009.11004.1.8 | ColumnncmfdlPLBT1BOPMsg | read-write | mandatory | The variable specifies the Disable/Enable of the send/receive of the PLB T1.403 BOP Messages. It is the bit 2 of the ncmfdl_loop |
| 1.3.6.1.4.1.321.1.3009.11004.1.9 | ColumnncmfdlIdlePattern | read-write | mandatory | The variable specifies the ncmfdl idle pattern which is bit 0 of ncmfdl Parameter2. |
| 1.3.6.1.4.1.321.1.3009.11004.1.10 | ColumnncmfdlMonitoringCsuType | read-write | mandatory | The variable specifies the ncmfdl standard which is bits 1 and bit 2 of ncmfdl Parameter2. |
| 1.3.6.1.4.1.321.1.3009.11005 | TablencmquadSyncTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.321.1.3009.11005.1 | RowncmquadSyncEntry | not-accessible | mandatory | An entry in the QUAD Sync Time table. |
| 1.3.6.1.4.1.321.1.3009.11005.1.1 | ColumnncmquadSyncIndex | read-only | mandatory | This object is the identifier of a Inter- face on a managed device. If there is an ifEn- try that is directly associated with this and only this DS1 interface,… |
| 1.3.6.1.4.1.321.1.3009.11005.1.2 | ColumnncmquadSyncEndId | read-only | mandatory | This value for this object indicates which end of the equipment it is configuring. |
| 1.3.6.1.4.1.321.1.3009.11005.1.3 | ColumnncmquadClkSyncSource | read-only | mandatory | This variable indicates Current Clk Source Active i.e., primary, Alt_1 or Alt_2 source. |
| 1.3.6.1.4.1.321.1.3009.11005.1.4 | ColumnncmquadClkCardPrim | read-write | mandatory | This variable indicates the primary clock source from which card of the that shelf. |
| 1.3.6.1.4.1.321.1.3009.11005.1.5 | ColumnncmquadClkSyncPrimary | read-write | mandatory | This variable indicates the Clock source internal, external or network port. Setting Auto restore one can have auto restore Capability. |
| 1.3.6.1.4.1.321.1.3009.11005.1.6 | ColumnncmquadAutoRestorePrim | read-write | mandatory | This variable indicates the Clock source auto restore or not for Internal, external or network clocks. |
| 1.3.6.1.4.1.321.1.3009.11005.1.7 | ColumnncmquadClkCardAlt1 | read-write | mandatory | This variable indicates the primary clock source from which card of the that shelf. |
| 1.3.6.1.4.1.321.1.3009.11005.1.8 | ColumnncmquadClkSyncAlt1 | read-write | mandatory | This variable indicates the Clock source internal, external or network port. Setting Auto restore one can have auto restore Capability. |
| 1.3.6.1.4.1.321.1.3009.11005.1.9 | ColumnncmquadAutoRestore1 | read-write | mandatory | This variable indicates the Clock source auto restore or not for Internal, external or network clocks. |
| 1.3.6.1.4.1.321.1.3009.11005.1.10 | ColumnncmquadClkCardAlt2 | read-write | mandatory | This variable indicates the primary clock source from which card of the that shelf. |
| 1.3.6.1.4.1.321.1.3009.11005.1.11 | ColumnncmquadClkSyncAlt2 | read-write | mandatory | This variable indicates the Clock source internal, external or network port. Setting Auto restore one can have auto restore Capability. |
| 1.3.6.1.4.1.321.1.3009.11005.1.12 | ColumnncmquadAutoRestore2 | read-write | mandatory | This variable indicates the Clock source auto restore or not for Internal, external or network clocks. |