VINA-MIB
136 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | Counter enterprises TimeTicks |
| RFC1213-MIB | transmission |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.10.32 | Nodeframe-relay | |||
| 1.3.6.1.2.1.10.32.1 | NodefrDLCIStatusChange | This trap indicates that the indicated Virtual Circuit has changed state. It has either been created or invalidated, or has toggled between the active and inac… | ||
| 1.3.6.1.2.1.10.32.1 | TablefrDlcmiTable | not-accessible | mandatory | The Parameters for the Data Link Connection Management Interface for the frame relay service on this interface. |
| 1.3.6.1.2.1.10.32.1.1 | RowfrDlcmiEntry | not-accessible | mandatory | The Parameters for a particular Data Link Con- nection Management Interface. |
| 1.3.6.1.2.1.10.32.1.1.1 | ColumnfrDlcmiIfIndex | read-only | mandatory | The ifIndex value of the corresponding ifEn- try. |
| 1.3.6.1.2.1.10.32.1.1.2 | ColumnfrDlcmiState | read-write | mandatory | This variable states which Data Link Connec- tion Management scheme is active (and by impli- cation, what DLCI it uses) on the Frame Relay interface. |
| 1.3.6.1.2.1.10.32.1.1.3 | ColumnfrDlcmiAddress | read-write | mandatory | This variable states which address format is in use on the Frame Relay interface. |
| 1.3.6.1.2.1.10.32.1.1.4 | ColumnfrDlcmiAddressLen | read-write | mandatory | This variable states which address length in octets. In the case of Q922 format, the length indicates the entire length of the address in- cluding the control … |
| 1.3.6.1.2.1.10.32.1.1.5 | ColumnfrDlcmiPollingInterval | read-write | mandatory | This is the number of seconds between succes- sive status enquiry messages. |
| 1.3.6.1.2.1.10.32.1.1.6 | ColumnfrDlcmiFullEnquiryInterval | read-write | mandatory | Number of status enquiry intervals that pass before issuance of a full status enquiry mes- sage. |
| 1.3.6.1.2.1.10.32.1.1.7 | ColumnfrDlcmiErrorThreshold | read-write | mandatory | This is the maximum number of unanswered Status Enquiries the equipment shall accept be- fore declaring the interface down. |
| 1.3.6.1.2.1.10.32.1.1.8 | ColumnfrDlcmiMonitoredEvents | read-write | mandatory | This is the number of status polling intervals over which the error threshold is counted. For example, if within 'MonitoredEvents' number of events the station… |
| 1.3.6.1.2.1.10.32.1.1.9 | ColumnfrDlcmiMaxSupportedVCs | read-write | mandatory | The maximum number of Virtual Circuits allowed for this interface. Usually dictated by the Frame Relay network. In response to a SET, if a value less than zero… |
| 1.3.6.1.2.1.10.32.1.1.10 | ColumnfrDlcmiMulticast | read-write | mandatory | This indicates whether the Frame Relay inter- face is using a multicast service. |
| 1.3.6.1.2.1.10.32.2 | TablefrCircuitTable | not-accessible | mandatory | A table containing information about specific Data Link Connection Identifiers and corresponding virtual circuits. |
| 1.3.6.1.2.1.10.32.2.1 | RowfrCircuitEntry | not-accessible | mandatory | The information regarding a single Data Link Connection Identifier. |
| 1.3.6.1.2.1.10.32.2.1.1 | ColumnfrCircuitIfIndex | read-only | mandatory | The ifIndex Value of the ifEntry this virtual circuit is layered onto. |
| 1.3.6.1.2.1.10.32.2.1.2 | ColumnfrCircuitDlci | read-only | mandatory | The Data Link Connection Identifier for this virtual circuit. |
| 1.3.6.1.2.1.10.32.2.1.3 | ColumnfrCircuitState | read-write | mandatory | Indicates whether the particular virtual cir- cuit is operational. In the absence of a Data Link Connection Management Interface, virtual circuit entries (rows… |
| 1.3.6.1.2.1.10.32.2.1.4 | ColumnfrCircuitReceivedFECNs | read-only | mandatory | Number of frames received from the network in- dicating forward congestion since the virtual circuit was created. |
| 1.3.6.1.2.1.10.32.2.1.5 | ColumnfrCircuitReceivedBECNs | read-only | mandatory | Number of frames received from the network in- dicating backward congestion since the virtual circuit was created. |
| 1.3.6.1.2.1.10.32.2.1.6 | ColumnfrCircuitSentFrames | read-only | mandatory | The number of frames sent from this virtual circuit since it was created. |
| 1.3.6.1.2.1.10.32.2.1.7 | ColumnfrCircuitSentOctets | read-only | mandatory | The number of octets sent from this virtual circuit since it was created. |
| 1.3.6.1.2.1.10.32.2.1.8 | ColumnfrCircuitReceivedFrames | read-only | mandatory | Number of frames received over this virtual circuit since it was created. |
| 1.3.6.1.2.1.10.32.2.1.9 | ColumnfrCircuitReceivedOctets | read-only | mandatory | Number of octets received over this virtual circuit since it was created. |
| 1.3.6.1.2.1.10.32.2.1.10 | ColumnfrCircuitCreationTime | read-only | mandatory | The value of sysUpTime when the virtual cir- cuit was created, whether by the Data Link Con- nection Management Interface or by a SetRe- quest. |
| 1.3.6.1.2.1.10.32.2.1.11 | ColumnfrCircuitLastTimeChange | read-only | mandatory | The value of sysUpTime when last there was a change in the virtual circuit state |
| 1.3.6.1.2.1.10.32.2.1.12 | ColumnfrCircuitCommittedBurst | read-write | mandatory | This variable indicates the maximum amount of data, in bits, that the network agrees to transfer under normal conditions, during the measurement interval. |
| 1.3.6.1.2.1.10.32.2.1.13 | ColumnfrCircuitExcessBurst | read-write | mandatory | This variable indicates the maximum amount of uncommitted data bits that the network will at- tempt to deliver over the measurement interval. By default, if no… |
| 1.3.6.1.2.1.10.32.2.1.14 | ColumnfrCircuitThroughput | read-write | mandatory | Throughput is the average number of 'Frame Re- lay Information Field' bits transferred per second across a user network interface in one direction, measured ov… |
| 1.3.6.1.2.1.10.32.3 | TablefrErrTable | not-accessible | mandatory | A table containing information about Errors on the Frame Relay interface. |
| 1.3.6.1.2.1.10.32.3.1 | RowfrErrEntry | not-accessible | mandatory | The error information for a single frame relay interface. |
| 1.3.6.1.2.1.10.32.3.1.1 | ColumnfrErrIfIndex | read-only | mandatory | The ifIndex Value of the corresponding ifEn- try. |
| 1.3.6.1.2.1.10.32.3.1.2 | ColumnfrErrType | read-only | mandatory | The type of error that was last seen on this interface. |
| 1.3.6.1.2.1.10.32.3.1.3 | ColumnfrErrData | read-only | mandatory | An octet string containing as much of the er- ror packet as possible. As a minimum, it must contain the Q.922 Address or as much as was delivered. It is desira… |
| 1.3.6.1.2.1.10.32.3.1.4 | ColumnfrErrTime | read-only | mandatory | The value of sysUpTime at which the error was detected. |
| 1.3.6.1.2.1.10.32.4 | Nodeframe-relay-globals | |||
| 1.3.6.1.2.1.10.32.4.1 | ScalarfrTrapState | read-write | mandatory | This variable indicates whether the system produces the frDLCIStatusChange trap. |
| 1.3.6.1.4.1.2186 | Nodevina | |||
| 1.3.6.1.4.1.2186.1 | NodevinaSys | |||
| 1.3.6.1.4.1.2186.1.1 | NodeoperatingSystem | |||
| 1.3.6.1.4.1.2186.1.1.1 | Nodevxworks | |||
| 1.3.6.1.4.1.2186.1.1.1.1 | NodevxMemory | |||
| 1.3.6.1.4.1.2186.1.1.1.1.2 | NodecurrentMemory | |||
| 1.3.6.1.4.1.2186.1.1.1.1.2.1 | ScalarcurrentMemorybytes | read-only | mandatory | |
| 1.3.6.1.4.1.2186.1.1.1.1.2.2 | ScalarcurrentMemoryblocks | read-only | mandatory | |
| 1.3.6.1.4.1.2186.1.1.1.1.2.3 | ScalarcurrentMemoryavgerage | read-only | mandatory | |
| 1.3.6.1.4.1.2186.1.1.1.1.2.4 | ScalarcurrentMemorymaximum | read-only | mandatory | |
| 1.3.6.1.4.1.2186.1.1.1.1.3 | NodefreeMemory | |||
| 1.3.6.1.4.1.2186.1.1.1.1.3.1 | ScalarfreeMemorybytes | read-only | mandatory | |
| 1.3.6.1.4.1.2186.1.1.1.1.3.2 | ScalarfreeMemoryblocks | read-only | mandatory | |
| 1.3.6.1.4.1.2186.1.1.1.1.3.3 | ScalarfreeMemoryaverage | read-only | mandatory | |
| 1.3.6.1.4.1.2186.1.1.1.1.4 | NodecumulativeMemory | |||
| 1.3.6.1.4.1.2186.1.1.1.1.4.1 | Scalarcumulativebytes | read-only | mandatory | |
| 1.3.6.1.4.1.2186.1.1.1.1.4.2 | Scalarcumulativeblocks | read-only | mandatory | |
| 1.3.6.1.4.1.2186.1.1.1.1.4.3 | Scalarcumulativeaverage | read-only | mandatory | |
| 1.3.6.1.4.1.2186.1.1.1.2 | NodevxNetwork | |||
| 1.3.6.1.4.1.2186.1.1.1.2.1 | NodevxTcp | |||
| 1.3.6.1.4.1.2186.1.1.1.3 | NodevxTask | |||
| 1.3.6.1.4.1.2186.1.1.1.3.1 | ScalarvxNumTasks | read-write | mandatory | |
| 1.3.6.1.4.1.2186.1.1.1.3.2 | TablevxTaskTable | not-accessible | deprecated | |
| 1.3.6.1.4.1.2186.1.1.1.3.2.1 | RowvxTaskEntry | not-accessible | deprecated | |
| 1.3.6.1.4.1.2186.1.1.1.3.2.1.1 | Columnname | read-only | deprecated | |
| 1.3.6.1.4.1.2186.1.1.1.3.2.1.2 | ColumnentryPoint | read-only | deprecated | |
| 1.3.6.1.4.1.2186.1.1.1.3.2.1.3 | ColumntaskID | read-only | deprecated | |
| 1.3.6.1.4.1.2186.1.1.1.3.2.1.4 | Columnpriority | read-write | deprecated | |
| 1.3.6.1.4.1.2186.1.1.1.3.2.1.5 | Columnstatus | read-write | deprecated | |
| 1.3.6.1.4.1.2186.1.1.1.3.2.1.6 | ColumnprogramCounter | read-only | deprecated | |
| 1.3.6.1.4.1.2186.1.1.1.3.2.1.7 | ColumnstackPointer | read-only | deprecated | |
| 1.3.6.1.4.1.2186.1.1.1.3.2.1.8 | Columnerrno | read-only | deprecated | |
| 1.3.6.1.4.1.2186.1.1.1.3.2.1.9 | Columndelay | read-only | deprecated | |
| 1.3.6.1.4.1.2186.1.1.1.4 | NodevxBootParams | |||
| 1.3.6.1.4.1.2186.1.1.1.4.1 | ScalarbootDev | read-write | mandatory | |
| 1.3.6.1.4.1.2186.1.1.1.4.2 | ScalarhostName | read-write | mandatory | |
| 1.3.6.1.4.1.2186.1.1.1.4.3 | ScalartargetName | read-write | mandatory | |
| 1.3.6.1.4.1.2186.1.1.1.4.4 | ScalarethernetAddr | read-write | mandatory | |
| 1.3.6.1.4.1.2186.1.1.1.4.5 | ScalarbackplaneAddr | read-write | mandatory | |
| 1.3.6.1.4.1.2186.1.1.1.4.6 | ScalarhostAddr | read-write | mandatory | |
| 1.3.6.1.4.1.2186.1.1.1.4.7 | ScalargatewayAddr | read-write | mandatory | |
| 1.3.6.1.4.1.2186.1.1.1.4.8 | ScalarbootFile | read-write | mandatory | |
| 1.3.6.1.4.1.2186.1.1.1.4.9 | ScalarstartupScript | read-write | mandatory | |
| 1.3.6.1.4.1.2186.1.1.1.4.10 | ScalaruserName | read-write | mandatory | |
| 1.3.6.1.4.1.2186.1.1.1.4.11 | Scalarpassword | read-write | mandatory | |
| 1.3.6.1.4.1.2186.1.1.1.4.12 | Scalarother | read-write | mandatory | |
| 1.3.6.1.4.1.2186.1.1.1.4.13 | ScalarprocessorNumber | read-write | mandatory | |
| 1.3.6.1.4.1.2186.1.1.1.4.14 | Scalarflags | read-write | mandatory | |
| 1.3.6.1.4.1.2186.1.1.1.5 | NodevxKernel | |||
| 1.3.6.1.4.1.2186.1.1.1.5.1 | NodevxClock | |||
| 1.3.6.1.4.1.2186.1.1.1.5.1.1 | ScalarsysClkRate | read-write | mandatory | |
| 1.3.6.1.4.1.2186.1.1.1.5.1.2 | Scalarticks | read-write | mandatory | |
| 1.3.6.1.4.1.2186.1.2 | Nodesnmpd | |||
| 1.3.6.1.4.1.2186.1.2.1 | ScalaragentVersion | read-only | mandatory | |
| 1.3.6.1.4.1.2186.1.2.2 | ScalarportVersion | read-only | mandatory | |
| 1.3.6.1.4.1.2186.1.2.3 | ScalartaskPriority | read-write | mandatory | |
| 1.3.6.1.4.1.2186.1.3 | Nodeidle | |||
| 1.3.6.1.4.1.2186.1.3.1 | ScalarcurrentIdle | read-only | mandatory | |
| 1.3.6.1.4.1.2186.1.3.2 | ScalartenSecondIdle | read-only | mandatory | |
| 1.3.6.1.4.1.2186.1.3.3 | ScalarsixtySecondIdle | read-only | mandatory | |
| 1.3.6.1.4.1.2186.1.3.4 | ScalaruserIdle | read-only | mandatory | |
| 1.3.6.1.4.1.2186.1.3.5 | ScalaruserInterval | read-write | mandatory | |
| 1.3.6.1.4.1.2186.1.3.6 | Scalarcalibration | read-only | mandatory | |
| 1.3.6.1.4.1.2186.1.3.7 | ScalarhistorySize | read-only | mandatory | |
| 1.3.6.1.4.1.2186.1.3.8 | ScalarhistoryValid | read-only | mandatory | |
| 1.3.6.1.4.1.2186.1.4 | Nodevina-system | |||
| 1.3.6.1.4.1.2186.1.4.1 | Scalarreboot | read-write | mandatory | |
| 1.3.6.1.4.1.2186.1.4.2 | ScalarrebootVME | read-write | mandatory | |
| 1.3.6.1.4.1.2186.1.4.3 | ScalarabortReboot | read-write | mandatory | |
| 1.3.6.1.4.1.2186.1.4.4 | Scalarsilent | read-write | mandatory | |
| 1.3.6.1.4.1.2186.1.4.5 | ScalarspuriousInts | read-write | mandatory | |
| 1.3.6.1.4.1.2186.1.5 | NodevinaSla | |||
| 1.3.6.1.4.1.2186.1.5.1 | NodevinaSlaConfigVars | |||
| 1.3.6.1.4.1.2186.1.5.1.1 | ScalarvinaSlaNumValidIntervals | read-only | mandatory | The number of currently valid intervals. |
| 1.3.6.1.4.1.2186.1.5.2 | TablevinaSlaCurrentTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.2186.1.5.2.1 | RowvinaSlaCurrentEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.2186.1.5.2.1.1 | ColumnvinaSlaCurrentPvcNumber | read-only | mandatory | The number of the PVC which the entry is associated with. |
| 1.3.6.1.4.1.2186.1.5.2.1.2 | ColumnvinaSlaCurrentEndToEndAveLatency | read-only | mandatory | The average end to end latency, sampled at once a minute during the current 15 minute interval. This is a running average that changes once a minute. The units… |
| 1.3.6.1.4.1.2186.1.5.2.1.3 | ColumnvinaSlaCurrentEndToEndPeakLatency | read-only | mandatory | The peak end to end latency so far during the current 15 minute interval. The units are in milliseconds. |
| 1.3.6.1.4.1.2186.1.5.2.1.4 | ColumnvinaSlaCurrentDdrAboveCir | read-only | mandatory | The ratio of number of bytes received to the number of bytes sent above the CIR. This is a percent value with units of 1/100 of a percent. |
| 1.3.6.1.4.1.2186.1.5.2.1.5 | ColumnvinaSlaCurrentDdrBelowCir | read-only | mandatory | The ratio of number of bytes received to the number of bytes sent below the CIR. This is a percent value with units of 1/100 of a percent. |
| 1.3.6.1.4.1.2186.1.5.2.1.6 | ColumnvinaSlaCurrentPvcDowntime | read-only | mandatory | The amount of time in milliseconds during the current 15 minute interval where the PVC was reported down or inactive through LMI. |
| 1.3.6.1.4.1.2186.1.5.2.1.7 | ColumnvinaSlaCurrentPvcUptime | read-only | mandatory | The amount of time in milliseconds during the current 15 minute interval where the PVC was up. |
| 1.3.6.1.4.1.2186.1.5.2.1.8 | ColumnvinaSlaCurrentPvcNumTimesDown | read-only | mandatory | The number of times during the current 15 minute where the PVC was reported down or inactive. |
| 1.3.6.1.4.1.2186.1.5.3 | TablevinaSlaIntervalTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.2186.1.5.3.1 | RowvinaSlaIntervalEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.2186.1.5.3.1.1 | ColumnvinaSlaIntervalPvcNumber | read-only | mandatory | The number of the PVC which the entry is associated with. |
| 1.3.6.1.4.1.2186.1.5.3.1.2 | ColumnvinaSlaIntervalNumber | read-only | mandatory | |
| 1.3.6.1.4.1.2186.1.5.3.1.3 | ColumnvinaSlaIntervalEndToEndAveLatency | read-only | mandatory | The average end to end latency, sampled at once a minute during this 15 minute interval. This is a running average that changes once a minute. The units are in… |
| 1.3.6.1.4.1.2186.1.5.3.1.4 | ColumnvinaSlaIntervalEndToEndPeakLatency | read-only | mandatory | The peak end to end latency during this 15 minute interval. The units are in milliseconds. |
| 1.3.6.1.4.1.2186.1.5.3.1.5 | ColumnvinaSlaIntervalDdrAboveCir | read-only | mandatory | The ratio of number of bytes received to the number of bytes sent above the CIR. This is a percent value with units of 1/100 of a percent. |
| 1.3.6.1.4.1.2186.1.5.3.1.6 | ColumnvinaSlaIntervalDdrBelowCir | read-only | mandatory | The ratio of number of bytes received to the number of bytes sent below the CIR. This is a percent value with units of 1/100 of a percent. |
| 1.3.6.1.4.1.2186.1.5.3.1.7 | ColumnvinaSlaIntervalPvcDowntime | read-only | mandatory | The amount of time in milliseconds during this 15 minute interval where the PVC was reported down or inactive through LMI. |
| 1.3.6.1.4.1.2186.1.5.3.1.8 | ColumnvinaSlaIntervalPvcUptime | read-only | mandatory | The amount of time in milliseconds during this 15 minute interval where the PVC was up. |
| 1.3.6.1.4.1.2186.1.5.3.1.9 | ColumnvinaSlaIntervalPvcNumTimesDown | read-only | mandatory | The number of times during this 15 minute interval where the PVC was reported down or inactive. |
| 1.3.6.1.4.1.2186.2 | NodevinaTraps |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| DLCI | INTEGER | ||
| Index | INTEGER |