VINES-MIB
494 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | Counter enterprises Gauge IpAddress NetworkAddress OBJECT-TYPE TimeTicks |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.1 | NodenmLoadAvgHigh | The 15 minute load average on the specified server has exceeded the specified threshold value. | ||
| 1.3.6.1.2.1.1 | Nodesystemsummary | |||
| 1.3.6.1.2.1.1.1 | ScalarssName | read-only | mandatory | The StreetTalk name of the server, up to 15 characters long. |
| 1.3.6.1.2.1.1.2 | ScalarssNetid | read-only | mandatory | The VINES network ID of the server, which is equal to the server's serial number. This ID may be up to 4 bytes in length. |
| 1.3.6.1.2.1.1.3 | ScalarssSwRev | read-only | mandatory | The VINES software revision for this server. |
| 1.3.6.1.2.1.1.4 | ScalarssLoadAvg1 | read-only | mandatory | The one minute exponential decaying average of server load. |
| 1.3.6.1.2.1.1.5 | ScalarssLoadAvg5 | read-only | mandatory | The five minute exponential decaying average of server load. |
| 1.3.6.1.2.1.1.6 | ScalarssLoadAvg15 | read-only | mandatory | The 15 minute exponential decaying average of server load. |
| 1.3.6.1.2.1.1.7 | ScalarssMsgAvg1 | read-only | mandatory | The one minute exponential decaying average of network messages sent and received per second. |
| 1.3.6.1.2.1.1.8 | ScalarssMsgsIn | read-only | mandatory | The total number of network messages that the server has received over the network since the last reboot. |
| 1.3.6.1.2.1.1.9 | ScalarssMsgsOut | read-only | mandatory | The total number of network messages that the server has sent over the network since the last reboot. |
| 1.3.6.1.2.1.1.10 | ScalarssDrops | read-only | mandatory | The total number of received messages that could not be processed due to a lack of communications buffer space. |
| 1.3.6.1.2.1.1.11 | ScalarssSwapAvg | read-only | mandatory | An exponential decaying average of the number of times a process was swapped to or from disk per second over a one minute period. |
| 1.3.6.1.2.1.1.12 | ScalarssProcType | read-only | mandatory | The type of the processor. |
| 1.3.6.1.2.1.1.13 | ScalarssProdType | read-only | mandatory | The type of banyan product. |
| 1.3.6.1.2.1.1.14 | ScalarssProdDescr | read-only | mandatory | The description of the product type. |
| 1.3.6.1.2.1.1.15 | ScalarssRealMemory | read-only | mandatory | The total amount of RAM, in kilobytes, configured in the server. |
| 1.3.6.1.2.1.1.16 | ScalarssOsType | read-only | mandatory | The type of server OS. UNIX is the only operating system supported. |
| 1.3.6.1.2.1.1.17 | ScalarssOsRev | read-only | mandatory | The operating system version. |
| 1.3.6.1.2.1.1.18 | ScalarssSystemUptime | read-only | mandatory | The amount time since this host was last initialized. Note that this is different from sysUpTime because sysUpTime is the uptime of the network management port… |
| 1.3.6.1.2.1.1.19 | ScalarssSystemDate | read-only | mandatory | The current time on the server. |
| 1.3.6.1.2.1.1.20 | ScalarssSystemStatus | read-write | mandatory | The status of the server. When the server is initialized this field will get set to running. When a shutdown is requested the server will shutdown all services… |
| 1.3.6.1.2.1.1.21 | ScalarssUserLicenseCfg | read-only | mandatory | The user limit license for this server. |
| 1.3.6.1.2.1.2 | NodenmSwapAvgHigh | The 15 minute swap average on the specified server has exceeded the specified threshold value. | ||
| 1.3.6.1.2.1.2 | Nodeservices | |||
| 1.3.6.1.2.1.2.1 | ScalarsvcNumber | read-only | mandatory | The number of services in the svcTable. |
| 1.3.6.1.2.1.2.2 | TablesvcTable | not-accessible | mandatory | A list of services on the server. |
| 1.3.6.1.2.1.2.2.1 | RowsvcEntry | not-accessible | mandatory | Each entry contains a set of statistics for one service. |
| 1.3.6.1.2.1.2.2.1.1 | ColumnsvcIndex | read-only | mandatory | A unique value for each service used by SNMP to keep track of service table entries. This value may vary if the table changes. |
| 1.3.6.1.2.1.2.2.1.2 | ColumnsvcName | read-only | mandatory | The StreetTalk name of the service, the names are of the form 'item@group@organization'. |
| 1.3.6.1.2.1.2.2.1.3 | ColumnsvcStatus | read-write | mandatory | The status of the service. Running - available to users. Initializing - starting and will be available shortly. Crashing - not functioning properly. Inconsiste… |
| 1.3.6.1.2.1.2.2.1.4 | ColumnsvcUpTime | read-only | mandatory | The amount of time that the service has been running. |
| 1.3.6.1.2.1.2.2.1.5 | ColumnsvcMsgsIn | read-only | mandatory | The total number of messages that the service has received over the network since the service was last started. |
| 1.3.6.1.2.1.2.2.1.6 | ColumnsvcMsgsOut | read-only | mandatory | The total number of messages that the service has sent over the network since the service was last started. |
| 1.3.6.1.2.1.2.2.1.7 | ColumnsvcLocIn | read-only | mandatory | The number of messages received by the service that were sent by entities that are local to the service's server since the service was last started. |
| 1.3.6.1.2.1.2.2.1.8 | ColumnsvcLocOut | read-only | mandatory | The number of messages sent by the service to entities that are local to the service's server since the service was last started. |
| 1.3.6.1.2.1.2.2.1.9 | ColumnsvcActSess | read-only | mandatory | The number of active sessions with the service. |
| 1.3.6.1.2.1.2.2.1.10 | ColumnsvcTotSess | read-only | mandatory | The total number of sessions that the service has handled since it was last started. |
| 1.3.6.1.2.1.2.2.1.11 | ColumnsvcCategory | read-only | mandatory | The type of service defined as follows: 1 Server Service 2 File Service or DOS/UNIX bridge file service 3 Print Service 4 Mail Service 5 StreetTalk Service 6 T… |
| 1.3.6.1.2.1.2.2.1.12 | ColumnsvcCpuTime | read-only | mandatory | The amount of current CPU use that the service is generating. |
| 1.3.6.1.2.1.2.2.1.13 | ColumnsvcSize | read-only | mandatory | The amount of virtual memory that is allocated to the service. |
| 1.3.6.1.2.1.2.2.1.14 | ColumnsvcSockets | read-only | mandatory | The number of VINES sockets that the service is currently consuming. |
| 1.3.6.1.2.1.2.2.1.15 | ColumnsvcSPPs | read-only | mandatory | The number of SPP connections that the service is currently consuming. |
| 1.3.6.1.2.1.2.2.1.16 | ColumnsvcLogMask | read-write | mandatory | The current log mask of a service. |
| 1.3.6.1.2.1.2.2.1.17 | ColumnsvcDiskName | read-only | mandatory | The location of the service. |
| 1.3.6.1.2.1.2.3 | TablesvcUserTable | not-accessible | mandatory | A list of the users for the services. |
| 1.3.6.1.2.1.2.3.1 | RowsvcUserEntry | not-accessible | mandatory | An entry in the list of service users. |
| 1.3.6.1.2.1.2.3.1.1 | ColumnsvcUserSvcIndex | read-only | mandatory | A unique value for each service on the server, used by SNMP to order the list. |
| 1.3.6.1.2.1.2.3.1.2 | ColumnsvcUserIndex | read-only | mandatory | A unique value for each user of a service. This value will change as new users are added and old users deleted from the service. |
| 1.3.6.1.2.1.2.3.1.3 | ColumnsvcUserSvcName | read-only | mandatory | The StreetTalk name of the service. |
| 1.3.6.1.2.1.2.3.1.4 | ColumnsvcUserName | read-only | mandatory | The StreetTalk name of the user of the service. |
| 1.3.6.1.2.1.3 | NodenmDropsHigh | The 15 minute average of dropped messages (due to lack of comms buffers) on the specified server has exceeded the specified threshold value. | ||
| 1.3.6.1.2.1.3 | Nodeperipherals | |||
| 1.3.6.1.2.1.3.1 | ScalardskNumber | read-only | mandatory | The number of disks in the disk table. |
| 1.3.6.1.2.1.3.2 | TabledskTable | not-accessible | mandatory | A list of statistics for the disks on this server. |
| 1.3.6.1.2.1.3.2.1 | RowdskEntry | not-accessible | mandatory | The statistics for one disk. |
| 1.3.6.1.2.1.3.2.1.1 | ColumndskIndex | read-only | mandatory | A unique value for each disk on the server, used by SNMP to order the table. |
| 1.3.6.1.2.1.3.2.1.2 | ColumndskName | read-only | mandatory | The name of the disk unit. |
| 1.3.6.1.2.1.3.2.1.3 | ColumndskUtil | not-accessible | mandatory | A five minute exponential decaying average showing the percentage of time that the disk unit was in use transferring data. |
| 1.3.6.1.2.1.3.2.1.4 | ColumndskDemand | not-accessible | mandatory | A five minute exponential decaying average showing the percentage of time that the disk unit needed to be used to satisfy all requests. |
| 1.3.6.1.2.1.3.2.1.5 | ColumndskSizeMB | read-only | mandatory | The size of the disk in megabytes. |
| 1.3.6.1.2.1.3.2.1.6 | ColumndskUsedPct | read-only | mandatory | The percentage of disk space that is currently in use. |
| 1.3.6.1.2.1.3.2.1.7 | ColumndskStatus | read-only | mandatory | The disks status, 1 is non-operational, 2 is operational. |
| 1.3.6.1.2.1.3.2.1.8 | ColumndskNOperations | read-only | mandatory | The total number of reads and writes for the disk since the server was last booted. |
| 1.3.6.1.2.1.3.2.1.9 | ColumndskNBlocks | read-only | mandatory | The total number of 1-kilobyte data blocks transferred to and from the disk since the server was last booted. |
| 1.3.6.1.2.1.3.2.1.10 | ColumndskResp | read-only | mandatory | The total amount of time processes spent waiting for a response from the disks. |
| 1.3.6.1.2.1.3.2.1.11 | ColumndskActive | read-only | mandatory | The total amount of the disk was active. |
| 1.3.6.1.2.1.3.2.1.12 | ColumndskBlkSize | read-only | mandatory | The block size in megabytes. |
| 1.3.6.1.2.1.3.2.1.13 | ColumndskNMisc | read-only | mandatory | The total number of miscellaneous disk operations since the server was last booted. |
| 1.3.6.1.2.1.3.2.1.14 | ColumndskNErrs | read-only | mandatory | The total number of disk errors that were not logged since the server was last booted. |
| 1.3.6.1.2.1.3.2.1.15 | ColumndskPctBusy | read-only | optional | A five minute exponential decaying average showing the percentage of time that the disk spent servicing data transfer requests. |
| 1.3.6.1.2.1.3.2.1.16 | ColumndskAvgWait | read-only | optional | A five minute exponential decaying average showing the average amount of time that read and write requests waited on the request queue to be serviced. |
| 1.3.6.1.2.1.3.2.1.17 | ColumndskAvgService | read-only | optional | A five minute exponential decaying average showing the average amount of time that the disk took to service read and write requests. |
| 1.3.6.1.2.1.4 | Nodefilesystem | |||
| 1.3.6.1.2.1.4 | NodenmFreeSwapLow | The Free Swap space on the specified server fell below the specified threshold value. | ||
| 1.3.6.1.2.1.4.1 | ScalarfsTotCache | read-write | mandatory | The amount of server RAM, in kilobytes, that is used for caching purposes. This is configurable from the server's console. Note: The setting of this object wil… |
| 1.3.6.1.2.1.4.2 | ScalarfsCacheBufSize | read-write | mandatory | The amount of server RAM, in kilobytes, that makes up a file system cache buffer. Also configurable from the console. Note: The setting of this object will not… |
| 1.3.6.1.2.1.4.3 | ScalarfsMaxOpenFiles | read-only | mandatory | The largest number of open files on the server at a single point in time. |
| 1.3.6.1.2.1.4.4 | ScalarfsOpenFiles | read-only | mandatory | The number of files currently open. |
| 1.3.6.1.2.1.4.5 | ScalarfsMaxOpensOnFiles | read-only | mandatory | The largest number of open operations on files at a single point in time. There can be more than one open operation on an open file. For example, two users may… |
| 1.3.6.1.2.1.4.6 | ScalarfsOpensOnFiles | read-only | mandatory | The current number of open operations on files. |
| 1.3.6.1.2.1.4.7 | ScalarfsRecLocks | read-only | mandatory | The current number of record locks. |
| 1.3.6.1.2.1.4.8 | ScalarfsMaxRecLocks | read-only | mandatory | The largest number of simultaneous record locks. |
| 1.3.6.1.2.1.4.9 | ScalarfsPctCacheHits | read-only | mandatory | The percentage of cache buffer requests that the system was able to service using existing cache buffers, without reading new data from disk. |
| 1.3.6.1.2.1.4.10 | ScalarfsCacheUnavail | read-only | mandatory | The number of cache buffer requests that the server was unable to service without reading new data from disk. |
| 1.3.6.1.2.1.5 | Nodecommresources | |||
| 1.3.6.1.2.1.5 | NodenmFreeMemLow | The Free Process memory space on the specified server fell below the specified threshold value. | ||
| 1.3.6.1.2.1.5.1 | ScalarcommTotBufs | read-write | mandatory | The total communications buffer space (the amount of server RAM used for network communications) in kilobytes. This is configurable from the server's console. … |
| 1.3.6.1.2.1.5.2 | ScalarcommBufUsage | read-only | mandatory | The percentage of the communications buffer space currently in use. |
| 1.3.6.1.2.1.5.3 | ScalarcommAllocsFailed | read-only | mandatory | The cumulative total of the number of buffers that could not be allocated since the server was last booted. |
| 1.3.6.1.2.1.5.4 | ScalarcommSocksCfg | read-write | mandatory | The maximum number of sockets that can be open at one time. Configurable from the server console. Note: The setting of this object will not take effect until t… |
| 1.3.6.1.2.1.5.5 | ScalarcommSocksInUse | read-only | mandatory | The percentage of the maximum configured sockets in use. |
| 1.3.6.1.2.1.5.6 | ScalarcommMaxOpenSocks | read-only | mandatory | The maximum number of sockets in use since the server was last booted. |
| 1.3.6.1.2.1.6 | NodenmCommBuffHigh | The communications buffer usage on the specified server exceeded the specified threshold value. | ||
| 1.3.6.1.2.1.6 | Nodevip | |||
| 1.3.6.1.2.1.6.1 | ScalarvipTotIn | read-only | mandatory | The total number of VINES IP packets that the server has received since the server was last booted. |
| 1.3.6.1.2.1.6.2 | ScalarvipTotOut | read-only | mandatory | The total number of VINES IP packets that the server has sent since the server was last booted. |
| 1.3.6.1.2.1.6.3 | ScalarvipBad | read-only | mandatory | The number of packets that the server has received since the server was last booted that had an incorrect checksum. |
| 1.3.6.1.2.1.6.4 | ScalarvipRouted | read-only | mandatory | The total number of packets that were routed to another node since the server was last booted. |
| 1.3.6.1.2.1.6.5 | ScalarvipRoutedHWM | read-only | mandatory | The largest number of packets routed in 1 second since the server was last booted. |
| 1.3.6.1.2.1.6.6 | ScalarvipBcast | read-only | mandatory | The number of VINES IP broadcast packets sent, both generated from the server and routed from other nodes. |
| 1.3.6.1.2.1.6.7 | ScalarvipBcastHWM | read-only | mandatory | The largest number of packets broadcast in 1 second since the server was last booted. |
| 1.3.6.1.2.1.6.8 | ScalarvipReass | read-only | mandatory | The number of times packets were reassembled since the server was last booted. One VINES IP packet being broken into three message fragments is counted as one … |
| 1.3.6.1.2.1.6.9 | ScalarvipFrags | read-only | mandatory | The number of packet fragmentations performed since the server was last booted. |
| 1.3.6.1.2.1.6.10 | ScalarvipToDodIP | read-only | mandatory | The number of packets that VINES IP passed to DARPA IP (TCP/IP) for encapsulation in IP headers since the server was last booted. |
| 1.3.6.1.2.1.6.11 | ScalarvipFromDodIP | read-only | mandatory | The number of packets that VINES IP received from DARPA IP (TCP/IP) since the server was last booted. |
| 1.3.6.1.2.1.6.12 | ScalarvipInFragments | read-only | mandatory | The number of fragments received since the server was last booted. |
| 1.3.6.1.2.1.6.13 | ScalarvipTooSmall | read-only | mandatory | The number of packets that the server has received since the server was last booted that were too small. |
| 1.3.6.1.2.1.6.14 | ScalarvipBadLength | read-only | mandatory | The number of packets that the server has received since the server was last booted that had an invalid packet length in the packet length field of the VINES I… |
| 1.3.6.1.2.1.6.15 | ScalarvipNoBuffers | read-only | mandatory | The number of packets that the server could not send, receive or route due to a lack of communication buffers since the server was last booted. |
| 1.3.6.1.2.1.7 | NodenmSockInUseHigh | The sockets in use on the specified server exceeded the specified threshold value. | ||
| 1.3.6.1.2.1.7 | Nodevrtp | |||
| 1.3.6.1.2.1.7.1 | ScalarvrtpNbrNumber | read-only | mandatory | The number of entries in the neighbor table (NbrTable). |
| 1.3.6.1.2.1.7.2 | TablevrtpNbrTable | not-accessible | mandatory | A list of information about neighbors of this server. |
| 1.3.6.1.2.1.7.2.1 | RowvrtpNbrEntry | not-accessible | mandatory | The information for each entry in the table. |
| 1.3.6.1.2.1.7.2.1.1 | ColumnvrtpNbrNetid | read-only | mandatory | The network ID of the neighbor, which is the first part of the neighbor's VINES internet address. If the neighbor is a server the network number is the server'… |
| 1.3.6.1.2.1.7.2.1.2 | ColumnvrtpNbrSubNetid | read-only | mandatory | The subnetwork ID of the neighbor, which is the second part of the neighbor's VINES internet address. If the neighbor is a server the subnetwork number is 1. |
| 1.3.6.1.2.1.7.2.1.3 | ColumnvrtpNbrType | read-only | mandatory | The type of the neighbor (workstation = pc). |
| 1.3.6.1.2.1.7.2.1.4 | ColumnvrtpNbrIfType | read-only | mandatory | The type of interface that the server uses to reach the neighbor. |
| 1.3.6.1.2.1.7.2.1.5 | ColumnvrtpNbrRemAddress | read-only | mandatory | The address of the neighbor's physical interface, such as a LAN address. If the neighbor is connected via an HDLC or asynchronous line this object specifies an… |
| 1.3.6.1.2.1.7.2.1.6 | ColumnvrtpNbrLocAddress | read-only | mandatory | The address of the server's physical interface, such as a LAN address. |
| 1.3.6.1.2.1.7.2.1.7 | ColumnvrtpNbrLocSlot | read-only | mandatory | The slot number of the interface card that the server uses to reach the neighbor. |
| 1.3.6.1.2.1.7.2.1.8 | ColumnvrtpNbrLocLine | read-only | mandatory | The number of the line on the serial card that the server uses to reach the neighbor. It does not apply to neighbors that are reached over LANs. |
| 1.3.6.1.2.1.7.2.1.9 | ColumnvrtpNbrSvrName | read-only | optional | The name of the neighbor. If the neighbor is a workstation then this object has no meaning. |
| 1.3.6.1.2.1.7.3 | ScalarvrtpRtNumber | read-only | mandatory | The number of entires in the route table (RtTable). |
| 1.3.6.1.2.1.7.4 | TablevrtpRtTable | not-accessible | mandatory | A list of networks and the routing information to find them. |
| 1.3.6.1.2.1.7.4.1 | RowvrtpRtEntry | not-accessible | mandatory | An entry for one network. |
| 1.3.6.1.2.1.7.4.1.1 | ColumnvrtpRtNetid | read-only | mandatory | The network ID of the route's destination server. |
| 1.3.6.1.2.1.7.4.1.2 | ColumnvrtpRtMetric | read-only | mandatory | The routing metric used by the called server to reach the destination. The metric reflects the cost of the path to the destination, it is in 200-millisecond un… |
| 1.3.6.1.2.1.7.4.1.3 | ColumnvrtpRtIdle | read-only | mandatory | The time to live timer for this route's entry. This value indicicates the amount of time before the entry is removed from the called server's routing table. Th… |
| 1.3.6.1.2.1.7.4.1.4 | ColumnvrtpRtGateNetid | read-only | mandatory | The network ID of the server that acts as the router for reaching the destination server. |
| 1.3.6.1.2.1.7.4.1.5 | ColumnvrtpRtSvrName | read-only | optional | The name of the destination server. |
| 1.3.6.1.2.1.7.4.1.6 | ColumnvrtpRtGateSvrName | read-only | optional | The name of the server that acts as the router for reaching the destination server. |
| 1.3.6.1.2.1.7.5 | ScalarvrtpTotIn | read-only | mandatory | The number of VINES VRTP packets received since the server was last booted. |
| 1.3.6.1.2.1.7.6 | ScalarvrtpTotOut | read-only | mandatory | The number of VINES VRTP packets sent since the server was last booted. |
| 1.3.6.1.2.1.7.7 | ScalarvrtpErrsIn | read-only | mandatory | The number of errors the VRTP protocol encountered while receiving packets, since the server was last booted. |
| 1.3.6.1.2.1.7.8 | ScalarvrtpNoBuffersIn | read-only | optional | The number of times that no communication buffers were available to process received RTP packets or create routine table entries. |
| 1.3.6.1.2.1.7.9 | ScalarvrtpUpdatesIn | read-only | optional | The total number of update packets received. |
| 1.3.6.1.2.1.7.10 | ScalarvrtpResponsesIn | read-only | optional | The number of responses received. |
| 1.3.6.1.2.1.7.11 | ScalarvrtpRqstsIn | read-only | optional | The number of requests received. |
| 1.3.6.1.2.1.7.12 | ScalarvrtpRqstLkUpIn | read-only | optional | The number of packets received that requested routing information. |
| 1.3.6.1.2.1.7.13 | ScalarvrtpRqstSlrInfoIn | read-only | optional | The number of request packets received that requested VINES routine metric information on a source-level route (Sequenced Only). |
| 1.3.6.1.2.1.7.14 | ScalarvrtpReinitIn | read-only | optional | The number reinitialization packets received (Sequenced Only). |
| 1.3.6.1.2.1.7.15 | ScalarvrtpResyncIn | read-only | optional | The number of resynchronization operations or update packets received that contained information for synchronizing routing table entries. |
| 1.3.6.1.2.1.7.16 | ScalarvrtpRedirIn | read-only | optional | The number of redirect packets received. |
| 1.3.6.1.2.1.7.17 | ScalarvrtpFragsIn | read-only | optional | The number of update or response fragments received (Sequenced Only). |
| 1.3.6.1.2.1.7.18 | ScalarvrtpFragsDropIn | read-only | optional | The number of packets dropped due to either the time taken to reassemble was too long or no communication buffer were available(SEQUENCED ONLY). |
| 1.3.6.1.2.1.7.19 | ScalarvrtpFragsBadIn | read-only | optional | The number of RTP fragments discarded because they had packet IDs that were out-of-sequence (SEQUENCED ONLY). |
| 1.3.6.1.2.1.7.20 | ScalarvrtpFragsDupIn | read-only | optional | The number of RTP fragments that were dropped because they were duplicates of other fragments (SEQUENCED ONLY). |
| 1.3.6.1.2.1.7.21 | ScalarvrtpFragsDoneIn | read-only | optional | The number of updates and responses that were fragmented or reassembled successfully(SEQUENCED ONLY). |
| 1.3.6.1.2.1.7.22 | ScalarvrtpReassBadIn | read-only | optional | The number of updates and responses that were not successfully fragmented or reassembled (SEQUENCED ONLY). |
| 1.3.6.1.2.1.7.23 | ScalarvrtpOutdatedIn | read-only | optional | The number of received RTP packets discarded because they were outdated (SEQUENCED ONLY). |
| 1.3.6.1.2.1.7.24 | ScalarvrtpNetInfoBad | read-only | optional | The number of received outdated entries for logical networks (SEQUENCED ONLY). |
| 1.3.6.1.2.1.7.25 | ScalarvrtpBadRdrs | read-only | optional | The number of redirect packets discarded because of a bad length. |
| 1.3.6.1.2.1.7.26 | ScalarvrtpBdcstIn | read-only | optional | The number of broadcasted RTP update packets received. |
| 1.3.6.1.2.1.7.27 | ScalarvrtpNoBuffersOut | read-only | optional | The number of times that no communication buffers were available to send RTP packets. |
| 1.3.6.1.2.1.7.28 | ScalarvrtpUpdatesOut | read-only | optional | The total number of update packets sent. |
| 1.3.6.1.2.1.7.29 | ScalarvrtpRqstLkUpOut | read-only | optional | The number of packets sent that requested routing information. |
| 1.3.6.1.2.1.7.30 | ScalarvrtpRqstSlrInfoOut | read-only | optional | The number of request packets sent that requested VINES routine metric information on a source-level route (SEQUENCED ONLY). |
| 1.3.6.1.2.1.7.31 | ScalarvrtpRqstsOut | read-only | optional | The number of requests sent. |
| 1.3.6.1.2.1.7.32 | ScalarvrtpReinitOut | read-only | optional | The number reinitialization packets sent (SEQUENCED ONLY). |
| 1.3.6.1.2.1.7.33 | ScalarvrtpResyncOut | read-only | optional | The number of resynchronization operations or update packets sent that contained information for synchronizing routing table entries. |
| 1.3.6.1.2.1.7.34 | ScalarvrtpRedirOut | read-only | optional | The number of redirect packets sent. |
| 1.3.6.1.2.1.7.35 | ScalarvrtpFragsOut | read-only | optional | The number of update or response fragments sent (SEQUENCED ONLY). |
| 1.3.6.1.2.1.7.36 | ScalarvrtpFragsDoneOut | read-only | optional | The number of updates and responses that were fragmented successfully (SEQUENCED ONLY). |
| 1.3.6.1.2.1.7.37 | ScalarvrtpFragsBadOut | read-only | optional | The number of updates and responses that were fragmented unsuccessfully (SEQUENCED ONLY). |
| 1.3.6.1.2.1.7.38 | ScalarvrtpFragsDropOut | read-only | optional | The number of packets dropped due to either the time taken to fragment the message was too long or no communication buffer were available (SEQUENCED ONLY). |
| 1.3.6.1.2.1.7.39 | ScalarvrtpBdcstOut | read-only | optional | The number of broadcasted RTP update packets sent. |
| 1.3.6.1.2.1.7.40 | ScalarvrtpRtCr | read-only | optional | The number of routes created by redirect packets. |
| 1.3.6.1.2.1.7.41 | ScalarvrtpRtMod | read-only | optional | The number of routes modified by redirect packets. |
| 1.3.6.1.2.1.7.42 | ScalarvrtpNbrAnchors | read-only | optional | The total entries in the neighbor table or total paths to all neighbors. |
| 1.3.6.1.2.1.7.43 | ScalarvrtpNbrEntries | read-only | optional | The total entries in the neighbor table or total paths to all neighbors. |
| 1.3.6.1.2.1.7.44 | ScalarvrtpNetEntries | read-only | optional | The total entries for networks in this server's network table. |
| 1.3.6.1.2.1.7.45 | ScalarvrtpLkUp | read-only | optional | The number of calls to look up network table entries by the server. |
| 1.3.6.1.2.1.7.46 | ScalarvrtpBadLkUp | read-only | optional | The number of calls to look up network table entries by the server that failed. |
| 1.3.6.1.2.1.7.47 | ScalarvrtpNonSeqTotIn | read-only | optional | The number of non-sequenced RTP packets received. |
| 1.3.6.1.2.1.7.48 | ScalarvrtpNonSeqTotOut | read-only | optional | The number of non-sequenced RTP packets sent. |
| 1.3.6.1.2.1.7.49 | ScalarvrtpNonSeqErrsIn | read-only | optional | The number of errors while receiving non-sequenced RTP packets. |
| 1.3.6.1.2.1.7.50 | ScalarvrtpNonSeqUpdIn | read-only | optional | The number of non-sequenced update packets received. |
| 1.3.6.1.2.1.7.51 | ScalarvrtpNonSeqRspIn | read-only | optional | The number of non-sequenced responses received. |
| 1.3.6.1.2.1.7.52 | ScalarvrtpNonSeqRqstIn | read-only | optional | The number of non-sequenced requests received. |
| 1.3.6.1.2.1.7.53 | ScalarvrtpNonSeqRdrIn | read-only | optional | The number of non-sequenced redirect packets received. |
| 1.3.6.1.2.1.7.54 | ScalarvrtpBadNonSeqRdrIn | read-only | optional | The number of invalid non-sequenced redirect packets received. |
| 1.3.6.1.2.1.7.55 | ScalarvrtpNonSeqBdcstIn | read-only | optional | The number of non-sequenced broadcast packets received. |
| 1.3.6.1.2.1.7.56 | ScalarvrtpNonSeqUpdOut | read-only | optional | The number of non-sequenced update packets sent. |
| 1.3.6.1.2.1.7.57 | ScalarvrtpNonSeqRspOut | read-only | optional | The number of non-sequenced responses sent. |
| 1.3.6.1.2.1.7.58 | ScalarvrtpNonSeqRqstOut | read-only | optional | The number of non-sequenced requests sent. |
| 1.3.6.1.2.1.7.59 | ScalarvrtpNonSeqRdrOut | read-only | optional | The number of non-sequenced redirect packets sent. |
| 1.3.6.1.2.1.7.60 | ScalarvrtpNonSeqBdcstOut | read-only | optional | The number of non-sequenced broadcast packets sent. |
| 1.3.6.1.2.1.7.61 | ScalarvrtpResponsesOut | read-only | optional | The number of responses sent. |
| 1.3.6.1.2.1.8 | NodenmSockOvflow | Socket overflow for the specified service. The number of packets dropped is also provided. | ||
| 1.3.6.1.2.1.8 | Nodevspp | |||
| 1.3.6.1.2.1.8.1 | ScalarvsppConnsInUse | read-only | mandatory | The number of SPP connections currently in use by processes on the server. |
| 1.3.6.1.2.1.8.2 | ScalarvsppConnsCfg | read-write | mandatory | The allowable maximum number of SPP connections that can be in use by processes on the server at one time. Note: The setting of this object will not take effec… |
| 1.3.6.1.2.1.8.3 | ScalarvsppMaxConns | read-only | mandatory | The maximum number of SPP connections in use at a single point in time since the server was last booted. |
| 1.3.6.1.2.1.8.4 | ScalarvsppTotIn | read-only | mandatory | The total number of VINES SPP packets that the server has received since the server was last booted. |
| 1.3.6.1.2.1.8.5 | ScalarvsppTotOut | read-only | mandatory | The total number of VINES SPP packets that the server has sent since the server was last booted. |
| 1.3.6.1.2.1.8.6 | ScalarvsppInErrs | read-only | optional | The number of SPP errors encountered while receiving packets, since the server was last booted. |
| 1.3.6.1.2.1.8.7 | ScalarvsppBadType | read-only | optional | The total number of packets received on SPP connections that had invalid SPP packet types. |
| 1.3.6.1.2.1.8.8 | ScalarvsppNoBuffers | read-only | optional | The number of packets that the server could not send, receive or route due to a lack of communication buffers since the server was last booted. |
| 1.3.6.1.2.1.8.9 | ScalarvsppNoPort | read-only | optional | The number of incoming packets that the server dropped due to an unmatched destination port or an unmatched connection ID. |
| 1.3.6.1.2.1.8.10 | ScalarvsppDups | read-only | optional | The number of incoming packets that were duplicates of other packets. |
| 1.3.6.1.2.1.8.11 | ScalarvsppBadOrder | read-only | optional | The number of incoming packets that were received out of order. |
| 1.3.6.1.2.1.8.12 | ScalarvsppDataIn | read-only | optional | The number of packets received on SPP connections. |
| 1.3.6.1.2.1.8.13 | ScalarvsppAcksIn | read-only | optional | The number of acknowledgement packets received. |
| 1.3.6.1.2.1.8.14 | ScalarvsppDiscIn | read-only | optional | The number of disconnected packets received on SPP connections. |
| 1.3.6.1.2.1.8.15 | ScalarvsppProbesIn | read-only | optional | The number of probe packets received on SPP connections. |
| 1.3.6.1.2.1.8.16 | ScalarvsppDataOut | read-only | optional | The number of data packets sent on SPP connections. |
| 1.3.6.1.2.1.8.17 | ScalarvsppAcksOut | read-only | optional | The number of acknowledgement packets sent. |
| 1.3.6.1.2.1.8.18 | ScalarvsppDiscOut | read-only | optional | The number of disconnected packets sent on SPP connections. |
| 1.3.6.1.2.1.8.19 | ScalarvsppProbesOut | read-only | optional | The number of probe packets sent on SPP connections. |
| 1.3.6.1.2.1.8.20 | ScalarvsppAbortsOut | read-only | optional | The number of data packets that had the abort bit set. |
| 1.3.6.1.2.1.8.21 | ScalarvsppLocal | read-only | optional | The number of packets sent locally using SPP. connections. |
| 1.3.6.1.2.1.9 | NodenmMsgAvgHigh | The 15 minute average of message activity on the specified server has exceeded the specified threshold value. | ||
| 1.3.6.1.2.1.9 | Nodevinterfaces | |||
| 1.3.6.1.2.1.9.1 | ScalarvifNumber | read-only | mandatory | The number of VINES interfaces configured on the server. |
| 1.3.6.1.2.1.9.2 | TablevifTable | not-accessible | mandatory | List of interfaces with some statistics about each interface. |
| 1.3.6.1.2.1.9.2.1 | RowvifEntry | not-accessible | mandatory | Information about one interface. |
| 1.3.6.1.2.1.9.2.1.1 | ColumnvifSlot | read-only | mandatory | The slot number of the interface's communications card. |
| 1.3.6.1.2.1.9.2.1.2 | ColumnvifType | read-only | mandatory | The interface type, types are the same as defined for vrtpNbrIfType in the vrtp neighbor table. |
| 1.3.6.1.2.1.9.2.1.3 | ColumnvifDescr | read-only | mandatory | A textual description of the interface. |
| 1.3.6.1.2.1.9.2.1.4 | ColumnvifAddress | read-only | mandatory | The physical address of the interface, applies to LAN interfaces only. |
| 1.3.6.1.2.1.9.2.1.5 | ColumnvifInPkts | read-only | mandatory | The total number of VINES IP packets that the server received since the last reboot. |
| 1.3.6.1.2.1.9.2.1.6 | ColumnvifInErrs | read-only | mandatory | The total number of received VINES IP packets that contained errors since the last reboot. |
| 1.3.6.1.2.1.9.2.1.7 | ColumnvifOutPkts | read-only | mandatory | The total number of VINES IP packets that the server sent since the last reboot. |
| 1.3.6.1.2.1.9.2.1.8 | ColumnvifOutErrs | read-only | mandatory | The total number of transmitted VINES IP packets that contained errors since the last reboot. |
| 1.3.6.1.2.1.9.3 | ScalarvifLnkNumber | read-only | mandatory | The number of serial links connected to the server. |
| 1.3.6.1.2.1.9.4 | TablevifLnkTable | not-accessible | mandatory | Data link level statistics for the serial lines on this server. |
| 1.3.6.1.2.1.9.4.1 | RowvifLnkEntry | not-accessible | mandatory | Stats for one serial line. |
| 1.3.6.1.2.1.9.4.1.1 | ColumnvifLnkSlot | read-only | mandatory | The slot number of the serial communications card to which the serial line is connected. |
| 1.3.6.1.2.1.9.4.1.2 | ColumnvifLnkLine | read-only | mandatory | The line number of the line on the serial communications card. |
| 1.3.6.1.2.1.9.4.1.3 | ColumnvifLnkType | read-only | mandatory | The type of data link level protocol used on this line. 1 Asynchronous Terminal Emulation. 7 Block asynchronous. 8 High-level Data Link Control (HDLC). 9 X.25 … |
| 1.3.6.1.2.1.9.4.1.4 | ColumnvifLnkTotIn | read-only | mandatory | The total number of frames received. |
| 1.3.6.1.2.1.9.4.1.5 | ColumnvifLnkTotOut | read-only | mandatory | The total number of frames transmitted. |
| 1.3.6.1.2.1.9.4.1.6 | ColumnvifLnkRetrans | read-only | mandatory | The total number of frames retransmitted. |
| 1.3.6.1.2.1.9.4.1.7 | ColumnvifLnkCRCErrs | read-only | mandatory | The number of errors due to CRC or frames that the card dropped. |
| 1.3.6.1.2.1.9.4.1.8 | ColumnvifLnkDrops | read-only | mandatory | The number of frames that the server could not receive due to a lack of communications buffers. |
| 1.3.6.1.2.1.9.4.1.9 | ColumnvifLnkUnders | read-only | mandatory | The total number of transmitter underrun errors on receive. |
| 1.3.6.1.2.1.9.4.1.10 | ColumnvifLnkOvers | read-only | mandatory | The total number of receiver overrun errors on receive. |
| 1.3.6.1.2.1.9.4.1.11 | ColumnvifLnkFrmErrs | read-only | mandatory | The total number of framing errors. |
| 1.3.6.1.2.1.9.5 | ScalarvifX25VCNumber | read-only | mandatory | The number of X.25 virtual circuits that are available to the server. |
| 1.3.6.1.2.1.9.6 | TablevifX25VCTable | not-accessible | mandatory | A list of X.25 packet level statistics for the virtual circuit. |
| 1.3.6.1.2.1.9.6.1 | RowvifX25VCEntry | not-accessible | mandatory | Statistics for one virtual circuit. |
| 1.3.6.1.2.1.9.6.1.1 | ColumnvifX25VCSlot | read-only | mandatory | The slot number of the serial communications card to which the virtual circuit's line is connected. |
| 1.3.6.1.2.1.9.6.1.2 | ColumnvifX25VCLine | read-only | mandatory | The number of the X.25 line configured on the serial communications card. |
| 1.3.6.1.2.1.9.6.1.3 | ColumnvifX25VCSession | read-only | mandatory | The local session number of the virtual circuit. |
| 1.3.6.1.2.1.9.6.1.4 | ColumnvifX25VCTotIn | read-only | mandatory | The total number of VINES IP packets received on this VC. |
| 1.3.6.1.2.1.9.6.1.5 | ColumnvifX25VCTotOut | read-only | mandatory | The total number of VINES IP packets sent on this VC. |
| 1.3.6.1.2.1.9.6.1.6 | ColumnvifX25VCInErrs | read-only | mandatory | The total number of received X.25 packets that contained errors. |
| 1.3.6.1.2.1.9.6.1.7 | ColumnvifX25VCOutErrs | read-only | mandatory | The total number of transmitted X.25 packets that contained errors. |
| 1.3.6.1.2.1.9.6.1.8 | ColumnvifX25VCPktsOut | read-only | mandatory | The total number of X.25 packets transmitted. |
| 1.3.6.1.2.1.9.6.1.9 | ColumnvifX25VCPktsAwaitAck | read-only | mandatory | The total number of X.25 packets transmitted that are awaiting acknowledgement. |
| 1.3.6.1.2.1.9.6.1.10 | ColumnvifX25VCBytesOut | read-only | mandatory | The total number of bytes transmitted. |
| 1.3.6.1.2.1.9.6.1.11 | ColumnvifX25VCBytesAwaitAck | read-only | mandatory | The total number of bytes transmitted that are awaiting acknowledgement. |
| 1.3.6.1.2.1.9.6.1.12 | ColumnvifX25VCPktsIn | read-only | mandatory | The total number of X.25 packets that have been received. |
| 1.3.6.1.2.1.9.6.1.13 | ColumnvifX25VCBytesIn | read-only | mandatory | The total number of bytes received. |
| 1.3.6.1.2.1.9.6.1.14 | ColumnvifX25VCResetsIn | read-only | mandatory | The total number of X.25 reset packets received. |
| 1.3.6.1.2.1.9.6.1.15 | ColumnvifX25VCResetsOut | read-only | mandatory | The total number of X.25 reset packets transmitted. |
| 1.3.6.1.2.1.9.6.1.16 | ColumnvifX25VCLogChnNum | read-only | mandatory | The logical channel number of the X.25 VC. |
| 1.3.6.1.2.1.9.6.1.17 | ColumnvifX25VCRemAddr | read-only | mandatory | The DTE address of the remote server on the other end of the VC. |
| 1.3.6.1.2.1.9.7 | TablevifStatsList | not-accessible | mandatory | A list of statistics for each LAN card in the server. The type and quantity of statistics depend on the type of the card. |
| 1.3.6.1.2.1.9.7.1 | RowvifStatEntry | not-accessible | mandatory | The statistics for one card. |
| 1.3.6.1.2.1.9.7.1.1 | ColumnvifStatSlot | read-only | mandatory | The slot number of the LAN interface card. |
| 1.3.6.1.2.1.9.7.1.2 | ColumnvifStatIndex | read-only | mandatory | A unique value for each statistic, used by SNMP to order the table. |
| 1.3.6.1.2.1.9.7.1.3 | ColumnvifStatDescr | read-only | mandatory | A brief description of the statistic. |
| 1.3.6.1.2.1.9.7.1.4 | ColumnvifStatValue | read-only | mandatory | The value of the statistic. |
| 1.3.6.1.2.1.10 | NodenmAllocFail-High | The number of failed communication buffer allocations on the specified server exceeded the specified threshold value. | ||
| 1.3.6.1.2.1.10 | Nodeos | |||
| 1.3.6.1.2.1.10.1 | Nodeossysstats | |||
| 1.3.6.1.2.1.10.1.1 | ScalaroscpuNum | read-only | mandatory | The number of processors. |
| 1.3.6.1.2.1.10.1.2 | TableoscpuTable | not-accessible | mandatory | A list of processors on the server. |
| 1.3.6.1.2.1.10.1.2.1 | RowoscpuEntry | not-accessible | mandatory | Each entry contains a set of statistics for one CPU. |
| 1.3.6.1.2.1.10.1.2.1.1 | ColumncpuIndex | read-only | mandatory | A unique value for each processor on the server. |
| 1.3.6.1.2.1.10.1.2.1.2 | ColumncpuIdleUsage | read-only | mandatory | The amount of time that the CPU was completely idle since boot time. |
| 1.3.6.1.2.1.10.1.2.1.3 | ColumncpuUserUsage | read-only | mandatory | The amount of time the CPU spent running processes that run in user space since boot time. |
| 1.3.6.1.2.1.10.1.2.1.4 | ColumncpuSysUsage | read-only | mandatory | The amount of time the CPU spent running processes that run in system mode since boottime. |
| 1.3.6.1.2.1.10.1.2.1.5 | ColumncpuWIOUserUsage | read-only | mandatory | The amount of time that the CPU was idle, but at least one process was waiting for an I/O operation to complete, since boot time. |
| 1.3.6.1.2.1.10.1.2.1.6 | ColumncpuProcSwappedOut | read-only | mandatory | The amount of time that the CPU had processes swapped out. |
| 1.3.6.1.2.1.10.1.2.1.7 | ColumncpuWIOUsage | read-only | mandatory | The amout of time that the CPU waited for I/O to occur. |
| 1.3.6.1.2.1.10.1.2.1.8 | ColumncpuWSUsage | read-only | mandatory | The amout of time that the CPU waited for a swap to occur. |
| 1.3.6.1.2.1.10.1.2.1.9 | ColumncpuWPIOUsage | read-only | mandatory | The amout of time that the CPU waited for device I/O to occur. |
| 1.3.6.1.2.1.10.1.3 | ScalarosBReads | read-only | mandatory | The number of transfers from disk to system buffers since boot time. |
| 1.3.6.1.2.1.10.1.4 | ScalarosBWrites | read-only | mandatory | The number of transfers from system buffers to disk since boot time. |
| 1.3.6.1.2.1.10.1.5 | ScalarosLReads | read-only | mandatory | The number of reads on the system buffers since boot time. |
| 1.3.6.1.2.1.10.1.6 | ScalarosLWrites | read-only | mandatory | The number of writes on the system buffers since boot time. |
| 1.3.6.1.2.1.10.1.7 | ScalarosPReads | read-only | mandatory | The number of reads via the raw (physical) device mechanism since boot time. |
| 1.3.6.1.2.1.10.1.8 | ScalarosPWrites | read-only | mandatory | The number of writes via the raw (physical) device mechanism since boot time. |
| 1.3.6.1.2.1.10.1.9 | ScalarosInSwaps | read-only | mandatory | The number of swaps in since boot time. |
| 1.3.6.1.2.1.10.1.10 | ScalarosOutSwaps | read-only | mandatory | The number of swaps out since boot time. |
| 1.3.6.1.2.1.10.1.11 | ScalarosInBSwaps | read-only | mandatory | The number of 4 KB buffers transferred in since boot time. |
| 1.3.6.1.2.1.10.1.12 | ScalarosOutBSwaps | read-only | mandatory | The number of 4 KB buffers transferred out since boot time. |
| 1.3.6.1.2.1.10.1.13 | ScalarosProcessSwitches | read-only | mandatory | The number of process switches since boot time. |
| 1.3.6.1.2.1.10.1.14 | ScalarosSystemCalls | read-only | mandatory | The number of system calls since boot time. |
| 1.3.6.1.2.1.10.1.15 | ScalarosSystemRead | read-only | mandatory | The number of system read calls. |
| 1.3.6.1.2.1.10.1.16 | ScalarosSystemWrite | read-only | mandatory | The number of system write calls. |
| 1.3.6.1.2.1.10.1.17 | ScalarosSystemFork | read-only | mandatory | The number of system fork calls. |
| 1.3.6.1.2.1.10.1.18 | ScalarosSystemExec | read-only | mandatory | The number of system exec calls. |
| 1.3.6.1.2.1.10.1.19 | ScalarosRunQueue | read-only | mandatory | The number of processes on the run queue. |
| 1.3.6.1.2.1.10.1.20 | ScalarosRunQueueOcc | read-only | mandatory | The amount of time that processes were on the run queue. |
| 1.3.6.1.2.1.10.1.21 | ScalarosSwapQueueTotals | read-only | mandatory | The number of processes on the swap queue. |
| 1.3.6.1.2.1.10.1.22 | ScalarosSwapQueueOcc | read-only | mandatory | The amount of time that processes were on the swap queue. |
| 1.3.6.1.2.1.10.1.23 | ScalarosIPCMsgOps | read-only | mandatory | The number of times a System V IPC message operation occurred. |
| 1.3.6.1.2.1.10.1.24 | ScalarosSemOps | read-only | mandatory | The number of semaphore operations performed by processes. |
| 1.3.6.1.2.1.10.1.25 | ScalarosPnpFault | read-only | mandatory | The number of times a process accessed a page which had not been page faulted in. |
| 1.3.6.1.2.1.10.1.26 | ScalarosWrtFault | read-only | mandatory | The number of times processes attempted to write to a page marked as copy-on-write. |
| 1.3.6.1.2.1.10.1.27 | ScalarosCurrentInodes | read-only | mandatory | The number of inode table entries currently in the inode table. |
| 1.3.6.1.2.1.10.1.28 | ScalarosHWInodes | read-only | mandatory | The high water mark of inode table entries in use since the last reboot of the called server. |
| 1.3.6.1.2.1.10.1.29 | ScalarosCurrentFiles | read-only | mandatory | The number of open file table entries currently in the open file table. |
| 1.3.6.1.2.1.10.1.30 | ScalarosHWFiles | read-only | mandatory | The high water mark of open file table entries in use since the last reboot of the called server. |
| 1.3.6.1.2.1.10.2 | Nodeosinfo | |||
| 1.3.6.1.2.1.10.2.1 | ScalarosMaxInodes | read-only | mandatory | The maximum number of inode table entries in the inode table. |
| 1.3.6.1.2.1.10.2.2 | ScalarosMaxFiles | read-only | mandatory | The maximum number of open file table entries in the open file table. |
| 1.3.6.1.2.1.10.2.3 | ScalarosMaxProcesses | read-only | mandatory | The maximum number of process table entries that UNIX on the server allocates. |
| 1.3.6.1.2.1.10.2.4 | ScalarosSwapSpaceAvailable | read-only | mandatory | The amount of swap space available in 512 byte blocks. |
| 1.3.6.1.2.1.10.2.5 | ScalarosFreeMemoryTotal | read-only | mandatory | The total amount of executable space in kilobytes. |
| 1.3.6.1.2.1.10.2.6 | ScalarosIOBufs | read-only | mandatory | The number of 1 KB system buffers that make up UNIX cache on the server. |
| 1.3.6.1.2.1.10.2.7 | ScalarosMounts | read-only | mandatory | The number of mount table entries that UNIX on the server allocates. |
| 1.3.6.1.2.1.10.2.8 | ScalarosUserMaxPu | read-only | mandatory | The maximum number of concurrent UNIX processes that can be run by users other than the superuser. |
| 1.3.6.1.2.1.10.2.9 | ScalarosUserMaxFp | read-only | mandatory | The maximum number of open files per process. |
| 1.3.6.1.2.1.10.3 | Nodeossummstats | |||
| 1.3.6.1.2.1.10.3.1 | ScalarosCurrentProcesses | read-only | mandatory | The current number of entries in the process table. |
| 1.3.6.1.2.1.10.3.2 | ScalarosSwapSpaceUsed | read-only | mandatory | The amount of swap space in use in 512 byte blocks. |
| 1.3.6.1.2.1.10.3.3 | ScalarosFreeMemoryAvailable | read-only | mandatory | The amount of executable space, in kilobytes, currently available. |
| 1.3.6.1.2.1.10.3.4 | ScalarosUserUsagePct | read-only | optional | The percentage of time the CPU spent running processes that run in user space over the last five minutes. |
| 1.3.6.1.2.1.10.3.5 | ScalarosSysUsagePct | read-only | mandatory | The percentage of time the CPU spent running processes that run in system mode over the last five minutes. |
| 1.3.6.1.2.1.10.3.6 | ScalarosWIOUsagePct | read-only | mandatory | The percentage of time that the CPU was idle, but at least one process was waiting for an I/O operation to complete, over the last five minutes. |
| 1.3.6.1.2.1.10.3.7 | ScalarosIdleUsagePct | read-only | mandatory | The percentage of time that the CPU was idle over the last five minutes. |
| 1.3.6.1.2.1.10.3.8 | ScalarosRunOccPct | read-only | mandatory | The percentage of time that processes occupied the run queue over the last five minutes. |
| 1.3.6.1.2.1.10.3.9 | ScalarosSwapOccPct | read-only | mandatory | The percentage of time that processes occupied the swap queue over the last five minutes. |
| 1.3.6.1.2.1.10.3.10 | ScalarosBuffRdRate | read-only | mandatory | The average number of times per second that data was read from disk into UNIX system buffers over the last five minutes. |
| 1.3.6.1.2.1.10.3.11 | ScalarosRdCachePct | read-only | mandatory | The percentage of read requests for UNIX system buffers that the kernel was able to service using existing UNIX system buffers, without reading new data from d… |
| 1.3.6.1.2.1.10.3.12 | ScalarosBuffWrRate | read-only | mandatory | The average number of times per second that data was written from UNIX system buffers to disk over the last five minutes. |
| 1.3.6.1.2.1.10.3.13 | ScalarosWrCachePct | read-only | mandatory | The percentage of write requests for UNIX system buffers that the kernel was able to service using existing UNIX system buffers, without writing new data to di… |
| 1.3.6.1.2.1.10.3.14 | ScalarosBswpInRate | read-only | mandatory | The average number of 4 KB pages that were swapped or paged from disk to main memory per second over the last five minutes. |
| 1.3.6.1.2.1.10.3.15 | ScalarosBswpOutRate | read-only | mandatory | The average number of 4 KB pages that were swapped or paged from main memory to disk per second over the last five minutes. |
| 1.3.6.1.2.1.10.3.16 | ScalarosVfltRate | read-only | mandatory | The average number of validity faults per second over the last five minutes. |
| 1.3.6.1.2.1.10.3.17 | ScalarosSwitchRate | read-only | mandatory | The average number of process switches per second over the last five minutes. |
| 1.3.6.1.2.1.10.3.18 | ScalarosSysCallRate | read-only | mandatory | The average number of UNIX system calls that processes issued per second over the last five minutes. |
| 1.3.6.1.2.1.11 | NodenmCacheHits-Low | The percentage of cache buffer requests that the specified server was able to service using existing cache buffers, without reading new data from the disk, fel… | ||
| 1.3.6.1.2.1.11 | Nodenmthresholds | |||
| 1.3.6.1.2.1.11.1 | ScalarnmLoadAvg15HighThres | read-write | mandatory | A High threshold value for the 15-minute average of server load (ssLoadAvg15). If the value of ssLoadAvg15 goes above this, a VINES alert and a nmLoadAvgHigh T… |
| 1.3.6.1.2.1.11.2 | ScalarnmSockInUseHighThres | read-write | mandatory | A High threshold value for the percentage of maximum configured sockets currently in use (commSocksInUse). If the value of commSocksInUse goes above this, a VI… |
| 1.3.6.1.2.1.11.3 | ScalarnmDiskUseHighThres | read-write | mandatory | A High threshold value for the percentage of disk space in use on any given disk (dskUsedPct). If the value of dskUsedPct goes above this, a VINES alert and a … |
| 1.3.6.1.2.1.11.4 | ScalarnmSwapAvgHighThres | read-write | mandatory | A High threshold value for the 1-minute average of process swapping (ssSwapAvg). If the value of ssSwapAvg goes above this, a VINES alert and a nmSwapAvgHigh T… |
| 1.3.6.1.2.1.11.5 | ScalarnmDropsHighThres | read-write | mandatory | A High threshold value for the no. of messages dropped due to lack of comm buffer space (ssDrops). If the value of ssDrops goes above this, a VINES alert and a… |
| 1.3.6.1.2.1.11.6 | ScalarnmSwapSpaceLowThres | read-write | mandatory | A Low threshold value for the amount of swap space available (osSwapSpaceAvailable). If the value of osSwapSpaceAvailable drops below this, a VINES alert and a… |
| 1.3.6.1.2.1.11.7 | ScalarnmFreeMemLowThres | read-write | mandatory | A Low threshold value for the amount of memory free (osFreeMemoryAvailable). If the value of osFreeMemoryAvailable drops below this, a VINES alert and a nmFree… |
| 1.3.6.1.2.1.11.8 | ScalarnmCommBuffHighThres | read-write | mandatory | A High threshold value for the percentage of total comms buffer space currently in use (commBufUsage). If the value of commBufUsage goes above this, a VINES al… |
| 1.3.6.1.2.1.11.9 | ScalarnmAllocFailHighThres | read-write | mandatory | A High threshold value for the total of comm. buffers that could not be allocated since the last reboot (commAllocsFailed). If the value of commAllocsFailed go… |
| 1.3.6.1.2.1.11.10 | ScalarnmCacheHitsLowThres | read-write | mandatory | A Low threshold value for the percentage of cache buffer requests that the system was able to service using existing cache buffers (fsPctCacheHits). If the val… |
| 1.3.6.1.2.1.11.11 | ScalarnmDiskBusyHighThres | read-write | mandatory | A High threshold value for the 5-minute average of the percentage of time a disk was in use transferring data (dskPctBusy). If the value of dskPctBusy rises ab… |
| 1.3.6.1.2.1.11.12 | ScalarnmMsgAvgHighThres | read-write | mandatory | A High threshold value for the 1-minute average of network messages sent/received per second (ssMsgAvg1). If the value of ssMsgAvg1 goes above this, a VINES al… |
| 1.3.6.1.2.1.11.13 | ScalarnmInodeUseHighThres | read-write | mandatory | A High threshold value for the number of inode table entries currently in the inode table (osCurrentInodes). If the value of osCurrentInodes rises above this, … |
| 1.3.6.1.2.1.12 | NodenmDiskFull | The percentage of disk space in use on the specified disk exceeded the threshold. | ||
| 1.3.6.1.2.1.12 | Nodetrapdata | |||
| 1.3.6.1.2.1.12.1 | ScalartpAlertTime | not-accessible | mandatory | The system time when alert was issued to the Alert Management Service, as specified in UNIX time() format. |
| 1.3.6.1.2.1.12.2 | ScalartpErrorCode | not-accessible | mandatory | A VINES error code. |
| 1.3.6.1.2.1.12.3 | ScalartpUserName | not-accessible | mandatory | A VINES StreetTalk user name. |
| 1.3.6.1.2.1.12.4 | ScalartpSvcName | not-accessible | mandatory | The StreetTalk Service name which issued the trap. |
| 1.3.6.1.2.1.12.5 | ScalartpSvrName | not-accessible | mandatory | The name of the Server on which the trap was issued. |
| 1.3.6.1.2.1.12.6 | ScalartpRefSvcName | not-accessible | mandatory | A StreetTalk Service name. |
| 1.3.6.1.2.1.12.7 | ScalartpRefSvrName | not-accessible | mandatory | The name of a Server. |
| 1.3.6.1.2.1.12.8 | ScalartpJobId | not-accessible | mandatory | The Job Identifier for a particular job in the Print Service. |
| 1.3.6.1.2.1.12.9 | ScalartpPaperFormat | not-accessible | mandatory | The paper format type specified for a print job. |
| 1.3.6.1.2.1.12.10 | ScalartpJobTotal | not-accessible | mandatory | The current number of jobs in the print queue. |
| 1.3.6.1.2.1.12.11 | ScalartpConnId | not-accessible | mandatory | A PostScript print service connection ID. |
| 1.3.6.1.2.1.12.12 | ScalartpMailSender | not-accessible | mandatory | The StreetTalk user name of a mail sender. |
| 1.3.6.1.2.1.12.13 | ScalartpPortId | not-accessible | mandatory | The Port ID being reported by VINES Security is the scene of a possible security breach. |
| 1.3.6.1.2.1.12.14 | ScalartpRtnName | not-accessible | mandatory | The name of the executing routine when the STDA service encountered a fatal error. |
| 1.3.6.1.2.1.12.15 | Scalartp162erravg | not-accessible | mandatory | The current average of 162 errors. |
| 1.3.6.1.2.1.12.16 | Scalartp162errThresHigh | not-accessible | mandatory | The High Threshold for 162 errors in ST. |
| 1.3.6.1.2.1.12.17 | Scalartp162errTotal | not-accessible | mandatory | The current total of 162 errors in ST. |
| 1.3.6.1.2.1.12.18 | ScalartpGrpName | not-accessible | mandatory | A StreetTalk Group Name. |
| 1.3.6.1.2.1.12.19 | ScalartpNumGrps | not-accessible | mandatory | The number of groups being maintained by StreetTalk on a given server (as a percentage of the maximum allowed no. |
| 1.3.6.1.2.1.12.20 | ScalartpGrpLimit | not-accessible | mandatory | The maximum number of groups allowed on a server. |
| 1.3.6.1.2.1.12.21 | ScalartpOldSerNum | not-accessible | mandatory | A server's old serial number. |
| 1.3.6.1.2.1.12.22 | ScalartpNewSerNum | not-accessible | mandatory | A server's new serial number. |
| 1.3.6.1.2.1.12.23 | ScalartpDiskSpaceLeft | not-accessible | mandatory | The amount of disk space left (KB) available to the Mail Service. |
| 1.3.6.1.2.1.12.24 | ScalartpMailMessageId | not-accessible | mandatory | The internal message ID of an item in the mail service. |
| 1.3.6.1.2.1.12.25 | ScalartpSockOvFlowNum | not-accessible | mandatory | The number of packets dropped due to a socket overflow. |
| 1.3.6.1.2.1.12.26 | ScalartpDiskNName | not-accessible | mandatory | The name of a disk unit. |
| 1.3.6.1.2.1.12.27 | ScalartpSvrNetId | not-accessible | mandatory | The server NetID. |
| 1.3.6.1.2.1.12.28 | ScalartpSubNetId | not-accessible | mandatory | A VINES subnetwork ID. |
| 1.3.6.1.2.1.12.29 | ScalartpSlotNum | not-accessible | mandatory | The Slot Number of a particular interface card. |
| 1.3.6.1.2.1.12.30 | ScalartpLineNum | not-accessible | mandatory | The Line Number on the interface board. |
| 1.3.6.1.2.1.12.31 | ScalartpFRcvd | not-accessible | mandatory | The number of frames received. |
| 1.3.6.1.2.1.12.32 | ScalartpFXmtd | not-accessible | mandatory | The number of frames transmitted. |
| 1.3.6.1.2.1.12.33 | ScalartpLnkDropsThres | not-accessible | mandatory | The threshold value for link-level drops - when exceeded an alert is issued. |
| 1.3.6.1.2.1.12.34 | ScalartpLnkReXtThres | not-accessible | mandatory | The threshold value for link-level re-transmits - when exceeded an alert is isssued. |
| 1.3.6.1.2.1.13 | Nodeams | |||
| 1.3.6.1.2.1.13 | NodenmDiskBusy | The 5 minute average of percentage of time the specified disk was in use exceeded the threshold. | ||
| 1.3.6.1.2.1.13.1 | TableamsRegTable | not-accessible | mandatory | The Table containing entries for each seperate registration with AMS to receive alerts. |
| 1.3.6.1.2.1.13.1.1 | RowamsRegEntry | not-accessible | mandatory | Entry into amsRegTable. |
| 1.3.6.1.2.1.13.1.1.1 | ColumnamsRegIndex | read-only | mandatory | The index value into the amsRegTable used by SNMP. |
| 1.3.6.1.2.1.13.1.1.2 | ColumnamsRegIdInstance | read-only | mandatory | The alert instance string that the registered party is interested in. |
| 1.3.6.1.2.1.13.1.1.3 | ColumnamsRegIdClass | read-only | mandatory | The application class that the registered party is interested in receiving alerts from. |
| 1.3.6.1.2.1.13.1.1.4 | ColumnamsRegIdTid | read-only | mandatory | The alert template identifier that the registered party is interested in. |
| 1.3.6.1.2.1.13.1.1.5 | ColumnamsRegPort | read-only | mandatory | The Port to which the alerts are to be sent. This will be NULL if amsRegAction is something other than a notification sent to an IPC Port. |
| 1.3.6.1.2.1.13.1.1.6 | ColumnamsRegWhoAdded | read-only | mandatory | The StreetTalk name of the user who added this particular entry to the table. |
| 1.3.6.1.2.1.13.1.1.7 | ColumnamsRegAlertee | read-only | mandatory | The StreetTalk name of the user to whom the alerts are to be sent. This will be NULL if the amsRegAction for this entry is 'sendipcport'. |
| 1.3.6.1.2.1.13.1.1.8 | ColumnamsRegAction | read-only | mandatory | The action to perform with alerts that match for this entry. The available options are : sendipcport - Pass the alert to the specific registered IPC port, as s… |
| 1.3.6.1.2.1.13.2 | TableamsAlertLogTable | not-accessible | mandatory | The Table containing entries for each each record written into each of the AMS alert log files. |
| 1.3.6.1.2.1.13.2.1 | RowamsLogEntry | not-accessible | mandatory | Entry into amsAlertLogTable. |
| 1.3.6.1.2.1.13.2.1.1 | ColumnamsLogFileIndex | read-only | mandatory | The index value into the amsRegTable used to distinguish between the alert log files kept by AMS. Options are: previous - The previous day's log. current - Tod… |
| 1.3.6.1.2.1.13.2.1.2 | ColumnamsLogRecIndex | read-only | mandatory | The index value into the amsAlertLogTable used to uniquely identify each record in a given alert log. |
| 1.3.6.1.2.1.13.2.1.3 | ColumnamsLogIdInstance | read-only | mandatory | The alert instance string of the AlertID in the alert record. |
| 1.3.6.1.2.1.13.2.1.4 | ColumnamsLogIdClass | read-only | mandatory | The application class of the AlertID in the alert record. |
| 1.3.6.1.2.1.13.2.1.5 | ColumnamsLogIdTid | read-only | mandatory | The template identifier of the AlertID in the alert record. |
| 1.3.6.1.2.1.13.2.1.6 | ColumnamsLogAlertTime | read-only | mandatory | The time at which the alert was originally issued. |
| 1.3.6.1.2.1.13.2.1.7 | ColumnamsLogAlertString | read-only | mandatory | The textual string description of the alert including all data values. |
| 1.3.6.1.2.1.14 | Nodemailservice | |||
| 1.3.6.1.2.1.14 | NodenmInodesHigh | The number of inodes in use on the specified server exceeded the threshold value. | ||
| 1.3.6.1.2.1.14.1 | TablemlMailBoxTable | not-accessible | mandatory | The Table containing entries for each Mailbox maintained by the Mail Service. |
| 1.3.6.1.2.1.14.1.1 | RowmlMailBoxTableEntry | not-accessible | mandatory | Entry into mlMailBoxTable. |
| 1.3.6.1.2.1.14.1.1.1 | ColumnmlMBTableIndex | read-only | mandatory | The index value into the mlMailBoxTable used by SNMP. |
| 1.3.6.1.2.1.14.1.1.2 | ColumnmlMBTableMBOwner | read-only | mandatory | The StreetTalk name of the user to whom this mailbox relates. |
| 1.3.6.1.2.1.14.1.1.3 | ColumnmlMBTableUnreadMsgs | read-only | mandatory | The number of unread messages in this mailbox. |
| 1.3.6.1.2.1.14.1.1.4 | ColumnmlMBTableTotalMsgs | read-only | mandatory | The total number of messages in this mailbox. |
| 1.3.6.1.2.1.15 | NodenmProcsHigh | The specified server cannot run any more processes. | ||
| 1.3.6.1.2.1.15 | Nodevlogs | |||
| 1.3.6.1.2.1.15.1 | TablevlogsTable | not-accessible | mandatory | The Table containing entries for each log. |
| 1.3.6.1.2.1.15.1.1 | RowvlogsEntry | not-accessible | mandatory | Entry into vlogsEntry. |
| 1.3.6.1.2.1.15.1.1.1 | ColumnvlogsFileIndex | read-only | mandatory | The index value into the vlogsTable. |
| 1.3.6.1.2.1.15.1.1.2 | ColumnvlogsDescr | read-only | mandatory | The record entry for the log. |
| 1.3.6.1.2.1.16 | NodenmTKRingOpen | The token ring adapter in the specified slot has an open/short circuit detected. | ||
| 1.3.6.1.2.1.17 | NodenmTKRingSigLoss | The token ring adapter in the specified slot has been detected with a Signal Loss. | ||
| 1.3.6.1.2.1.18 | NodenmTKRingHardErr | The token ring adapter in the specified slot has been detected with a Hard Error. | ||
| 1.3.6.1.2.1.19 | NodenmTKRingRmvHardErr | The token ring adapter in the specified slot removed itself from the token ring. | ||
| 1.3.6.1.2.1.20 | NodenmTKRingRmvMacFrame | Removing the MAC frame from the token ring adapter in the specified slot caused it to remove itself from the Token Ring. | ||
| 1.3.6.1.2.1.21 | NodenmLnkDropsHigh | The percentage of frames dropped with respect to the total frames received, over the previous 15 minutes, exceeded the threshold value. | ||
| 1.3.6.1.2.1.22 | NodenmLnkReTXHigh | The percentage of frames retransmitted with respect to the total frames transmitted, over the previous 15 minutes, exceeded the threshold value. | ||
| 1.3.6.1.2.1.23 | NodebsSysBkUpFailed | The system back-up on the specified system failed with the given error code. | ||
| 1.3.6.1.2.1.24 | NodebsIncBkUpAborted | The incremental back-up on the specified system was aborted. | ||
| 1.3.6.1.2.1.25 | NodebsIncBkUpFailed | The incremental back-up on the specified system failed with the given error code. | ||
| 1.3.6.1.2.1.26 | NodebsSvcBkUpFailed | The service back-up on the specified system failed with the given error code. | ||
| 1.3.6.1.2.1.27 | NodepsFormUnavail | The specified job requested a paper format which was not available. | ||
| 1.3.6.1.2.1.28 | NodepsUserNoAuth | The specified user is not authorized to connect to the specified printer. | ||
| 1.3.6.1.2.1.29 | NodepsBadDest | The specified destination cannot be started. | ||
| 1.3.6.1.2.1.30 | NodepsJobReject | The specified job was rejected on the specific print service by the given user. | ||
| 1.3.6.1.2.1.31 | NodepsQueueFull | The specified print queue has reached its' capacity. | ||
| 1.3.6.1.2.1.32 | NodepsOffline | The specified entity has gone offline. | ||
| 1.3.6.1.2.1.33 | NodepsPapError | The specified PAP error occurred on the given connection ID. | ||
| 1.3.6.1.2.1.34 | NodepsAtalkErr | A fatal AppleTalk error occurred in the PostScript print service. | ||
| 1.3.6.1.2.1.35 | NodepsPsPrinterErr | A printer error was detected on the PostScript print service. | ||
| 1.3.6.1.2.1.36 | NodessSvcNoStart | The specified service was unable to be started by Server Service. The error code is provided. | ||
| 1.3.6.1.2.1.37 | NodessNoReconnVS | Server Service failed to reconnect to VINES Security Service. The error code is provided. | ||
| 1.3.6.1.2.1.38 | NodessNoReconnST | Server Service failed to reconnect to StreetTalk Service. The error code is provided. | ||
| 1.3.6.1.2.1.39 | NodessSvcCrashed | The specified service crashed. | ||
| 1.3.6.1.2.1.40 | NodessSvcRecrashed | The specified service recrashed on a restart attempt. | ||
| 1.3.6.1.2.1.41 | NodessBadSvcDB | The services database is corrupted. Server Service is halting. | ||
| 1.3.6.1.2.1.42 | NodessPowerFail | The power has failed. Server Service is going down. | ||
| 1.3.6.1.2.1.43 | NodessDying | Server Service died with the given error. All services will be killed. | ||
| 1.3.6.1.2.1.44 | NodessPanicDBWrite | Server Service failed to write to the services database file. | ||
| 1.3.6.1.2.1.45 | NodessPanicWait | Server Service failed to wait on child process death. | ||
| 1.3.6.1.2.1.46 | NodessPanicUlimit | Server Service unable to set limit. | ||
| 1.3.6.1.2.1.47 | NodessNoMemory | Server Service unable to allocate memory. | ||
| 1.3.6.1.2.1.48 | NodessTimeSet | Server Service set the Network Time. | ||
| 1.3.6.1.2.1.49 | NodemsMBoxFull | The specified user's mailbox is full. The mail service is unable to deliver mail from the second user name. | ||
| 1.3.6.1.2.1.50 | NodemsDiskFull | The Mail service disk is running out of space; only the specified number of kilobytes are left. | ||
| 1.3.6.1.2.1.51 | NodemsPanic | The Mail service failed with the given error code. | ||
| 1.3.6.1.2.1.52 | NodemsCompressFail | Message Compression failed on the given message. | ||
| 1.3.6.1.2.1.53 | NodemsDecompressFail | Message Decompression failed on the given message. | ||
| 1.3.6.1.2.1.54 | NodemsMasquerade | The specified user is sending mail masquerading as the second user name. | ||
| 1.3.6.1.2.1.55 | NodemsMTAPanic | The mail message transport system has crashed. | ||
| 1.3.6.1.2.1.56 | NodemsBMSPanic | The mail message store system has crashed. | ||
| 1.3.6.1.2.1.57 | NodevsNoReachST | The VINES Security Service cannot access the local StreetTalk Service. | ||
| 1.3.6.1.2.1.58 | NodevsBadLoginPhysLoc | A failed login occurred due to an invalid physical location. The attempt was from the given port and using the given user name. | ||
| 1.3.6.1.2.1.59 | NodevsBadLoginDialin | A failed login occurred due to a breach of dial-in security. The attempt was from the given port and using the given user name. | ||
| 1.3.6.1.2.1.60 | NodevsBadLoginTime | A failed login occurred for the given user name due to attempt to login outside of login-time restrictions. | ||
| 1.3.6.1.2.1.61 | NodevsMaxBadLogins | A failed login occurred from the given port for the given user name due to exceeding the maximum allowed password attempts. | ||
| 1.3.6.1.2.1.62 | NodevsSDBInconsist | The nonce stamp did not match with that in the session database file. | ||
| 1.3.6.1.2.1.63 | NodevsNoSessAvail | A login session was denied as the allowed no. of sessions had been reached. | ||
| 1.3.6.1.2.1.64 | NodevsSvrSvrPwd | A secure link was requested to the specified server and was not established due to a bad password. | ||
| 1.3.6.1.2.1.65 | NodevsNoSTLogin | The VINES Security Service could not login to StreetTalk, with the given error code, and hence is exiting. | ||
| 1.3.6.1.2.1.66 | NodevsNoSpace | The VINES Security Service could not compress the sessions file as the disk is full. | ||
| 1.3.6.1.2.1.67 | NodevsLinkDown | The point-to-point link to the specified server has been severed. | ||
| 1.3.6.1.2.1.68 | NodevsPCDialTerm | A PC Dial-In session has been severed on the indicated slot and line number. | ||
| 1.3.6.1.2.1.69 | NodevsPCDialInit | A PC Dial-In session has been established on the indicated slot and line number. | ||
| 1.3.6.1.2.1.70 | NodeafpAtalkDown | An AppleTalk stack error was detected. | ||
| 1.3.6.1.2.1.71 | NodeafpSessDiscon | A Session disconnect was detected. | ||
| 1.3.6.1.2.1.72 | NodedaGCoreDump | STDA getnames going down unexpectedly. | ||
| 1.3.6.1.2.1.73 | NodedaSCoreDump | STDA service going down unexpectedly. | ||
| 1.3.6.1.2.1.74 | NodestCoreDump | StreetTalk service going down unexpectedly with the given error code. | ||
| 1.3.6.1.2.1.75 | Nodest162Errs | The current 15 minute average of 162 (network timeout) errors has exceeded the set threshold. | ||
| 1.3.6.1.2.1.76 | NodestAddedGrp | The specified group has been added on the given server. | ||
| 1.3.6.1.2.1.77 | NodestDeletedGrp | The specified group has been deleted on the given server. | ||
| 1.3.6.1.2.1.78 | NodestRebuild | A data inconsistency was found in the specified group. A rebuild will be attempted. | ||
| 1.3.6.1.2.1.79 | NodestGrpLimit | The number of groups on the server has exceeded the threshold percentage value of the maximum allowed. | ||
| 1.3.6.1.2.1.80 | NodestSerialNum | The server serial number has been changed from the given old value to the given new value. | ||
| 1.3.6.1.2.1.81 | NodestDupGrp | A duplicate of the specified group also exists on the given server. | ||
| 1.3.6.1.4.1.130 | Nodebanyan | |||
| 1.3.6.1.4.1.130.1 | Nodevinesmibs | |||
| 1.3.6.1.4.1.130.1.1 | Nodemib1 | |||
| 1.3.6.1.4.1.130.1.2 | Nodemib2 |