VISINET2-MIB
311 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | Counter enterprises TimeTicks |
| RFC1213-MIB | DisplayString |
| SNMPv2-SMI | OBJECT-TYPE |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.223 | Nodeunisys | |||
| 1.3.6.1.4.1.223.10 | NodeunisysOpen | |||
| 1.3.6.1.4.1.223.10.6 | NodeunisysEnvMonitor | |||
| 1.3.6.1.4.1.223.10.6.1 | NodeuemTrapConfigurationChange | This trap indicates that configuration changes have been made in the Environmental Monitoring subsystem. | ||
| 1.3.6.1.4.1.223.10.6.2 | ScalaruemAgentRevMajor | read-only | mandatory | Major version of the Unisys Environmental Monitoring Agent. |
| 1.3.6.1.4.1.223.10.6.2 | NodeuemTrapSensorCritical | The monitored value of a sensor has crossed the critical threshhold value. | ||
| 1.3.6.1.4.1.223.10.6.3 | ScalaruemAgentRevMinor | read-only | mandatory | Minor version of the Unisys Environmental Monitoring Agent. |
| 1.3.6.1.4.1.223.10.6.3 | NodeuemTrapSensorWarning | The monitored value of a sensor has crossed into the warning range of values. Note that this trap can be fired in two situations: both moving from the critical… | ||
| 1.3.6.1.4.1.223.10.6.4 | ScalaruemMibRevMajor | read-only | mandatory | The Major Revision level of this MIB. A change in the major revision level represents a possible compatibility problem with older versions of the MIB. |
| 1.3.6.1.4.1.223.10.6.4 | NodeuemTrapSensorNormal | The monitored value of a sensor has returned to within the normal range. | ||
| 1.3.6.1.4.1.223.10.6.5 | ScalaruemMibRevMinor | read-only | mandatory | The minor revision level of this MIB. A change in the minor revision level may represent some minor additional support, changes to documentation or fixes to er… |
| 1.3.6.1.4.1.223.10.6.5 | NodeuemTrapSwitchAlert | The monitored state of a switch has changed to the unexpected state for a normally operating system. The unexpected state is defined to be when uemSwitchCurren… | ||
| 1.3.6.1.4.1.223.10.6.6 | NodeuemTrapSwitchNormal | A switch has returned to the normal state expected for a normally operating system. The normal state is defined to be when uemSwitchCurrentState equals uemSwit… | ||
| 1.3.6.1.4.1.223.10.6.7 | ScalaruemSystemDescription | read-only | mandatory | Text describing this system such as manufacturer and model number. |
| 1.3.6.1.4.1.223.10.6.8 | ScalaruemTrapsEnabled | read-write | mandatory | All Environmental Monitoring traps can be globally disabled by setting this FALSE. |
| 1.3.6.1.4.1.223.10.6.9 | ScalaruemTrapSeverity | read-only | mandatory | Additional information delivered with sensor and switch trap messages. Advanced management applications can make use of this information to better evaluate the… |
| 1.3.6.1.4.1.223.10.6.16 | TableuemEnvMonitorTable | not-accessible | mandatory | An entry for each Monitor device on this host that is actively reporting environmental data via the SNMP Agent. There may ofen only be one row in this table, b… |
| 1.3.6.1.4.1.223.10.6.16.1 | RowuemEnvMonitorTableEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.223.10.6.16.1.1 | ColumnuemEnvMonIndex | read-only | mandatory | A unique value for each hardware monitoring device. |
| 1.3.6.1.4.1.223.10.6.16.1.2 | ColumnuemEnvMonLocation | read-only | mandatory | The physical location of the Environmental Monitor device in the host hardware. e.g. disk drawer 1, DAT drawer... |
| 1.3.6.1.4.1.223.10.6.16.1.3 | ColumnuemEnvMonType | read-only | mandatory | Identifies a specific environmental monitoring device. |
| 1.3.6.1.4.1.223.10.6.16.1.5 | ColumnuemEnvMonFwRevMajor | read-only | mandatory | The Environmental Monitor device firmware major version number. |
| 1.3.6.1.4.1.223.10.6.16.1.6 | ColumnuemEnvMonFwRevMinor | read-only | mandatory | The Environmental Monitor device firmware minor version number. |
| 1.3.6.1.4.1.223.10.6.16.1.7 | ColumnuemEnvMonFwRelDate | read-only | mandatory | The release date of the firmware for this device reported as YYYY-MM-DD. |
| 1.3.6.1.4.1.223.10.6.16.1.8 | ColumnuemEnvMonUpTime | read-only | mandatory | Length of time since last system power-up or last time the SysReset command was issued (which ever is most recent). This uptime is relative only to the monitor… |
| 1.3.6.1.4.1.223.10.6.17 | TableuemSensorTable | not-accessible | mandatory | All fan, temperature and voltage sensors are collected in this table. All these devices are similar in that they monitor 5 value ranges: low critical, low warn… |
| 1.3.6.1.4.1.223.10.6.17.1 | RowuemSensorTableEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.223.10.6.17.1.1 | ColumnuemSensorIndex | read-only | mandatory | A unique value for each sensor in the monitored system. Note: if there are multiple environmental monitoring cards in a system, all sensors associated with suc… |
| 1.3.6.1.4.1.223.10.6.17.1.2 | ColumnuemSensorEnvMonIndex | read-only | mandatory | A link into the EnvMonitor device table. This identifies which environmental device is managing this sensor. |
| 1.3.6.1.4.1.223.10.6.17.1.3 | ColumnuemSensorType | read-only | mandatory | The general classification of this sensor. |
| 1.3.6.1.4.1.223.10.6.17.1.4 | ColumnuemSensorDescription | read-only | mandatory | Text describing this sensor. |
| 1.3.6.1.4.1.223.10.6.17.1.5 | ColumnuemSensorStatus | read-only | mandatory | The current state of the sensor. |
| 1.3.6.1.4.1.223.10.6.17.1.6 | ColumnuemSensorValue | read-only | mandatory | The current numeric value of the sensor. The interpretation of this value is related to the type of sensor. Fan sensor values are reported in rpms (revolutions… |
| 1.3.6.1.4.1.223.10.6.17.1.7 | ColumnuemSensorNominalValue | read-write | mandatory | This is the normal value expected to be reported by this sensor in a properly operating system. |
| 1.3.6.1.4.1.223.10.6.17.1.8 | ColumnuemSensorHighCriticalValue | read-write | mandatory | When the sensor exceeds this value, a critical trap is sent. When appropriate, this test point can be disabled by setting it to the maximum integer value. |
| 1.3.6.1.4.1.223.10.6.17.1.9 | ColumnuemSensorHighCriticalLabel | read-only | mandatory | Text describing this test point. |
| 1.3.6.1.4.1.223.10.6.17.1.10 | ColumnuemSensorHighWarningValue | read-write | mandatory | When the sensor value exceeds this value, a warning trap is sent. This test point is disabled by setting it to the same value as the high critical value. |
| 1.3.6.1.4.1.223.10.6.17.1.11 | ColumnuemSensorHighWarningLabel | read-only | mandatory | Text describing this test point. |
| 1.3.6.1.4.1.223.10.6.17.1.12 | ColumnuemSensorLowWarningValue | read-write | mandatory | When the sensor value goes below this value, a warning trap is sent. This test point can be disabled by setting it to the same value as the low critical point. |
| 1.3.6.1.4.1.223.10.6.17.1.13 | ColumnuemSensorLowWarningLabel | read-only | mandatory | Text describing this test point. |
| 1.3.6.1.4.1.223.10.6.17.1.14 | ColumnuemSensorLowCriticalValue | read-write | mandatory | When the sensor goes below this value, a critical trap is sent. This test point can be disabled by setting it to zero. |
| 1.3.6.1.4.1.223.10.6.17.1.15 | ColumnuemSensorLowCriticalLabel | read-only | mandatory | Text describing this test point. |
| 1.3.6.1.4.1.223.10.6.17.1.16 | ColumnuemSensorEnabled | read-only | mandatory | If this field is FALSE, the sensor is disabled. No traps will be sent from a disabled sensor. |
| 1.3.6.1.4.1.223.10.6.18 | TableuemSwitchTable | not-accessible | mandatory | An entry for each switch in the monitored system. Switches report true/false status and are useful for indicating open doors, unlocked keys, etc. There may be … |
| 1.3.6.1.4.1.223.10.6.18.1 | RowuemSwitchTableEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.223.10.6.18.1.1 | ColumnuemSwitchIndex | read-only | mandatory | A unique value for each switch in the monitored system. |
| 1.3.6.1.4.1.223.10.6.18.1.2 | ColumnuemSwitchEnvMonIndex | read-only | mandatory | A link into the EnvMonitor device table. This identifies which environmental device is managing this switch. |
| 1.3.6.1.4.1.223.10.6.18.1.3 | ColumnuemSwitchDescription | read-only | mandatory | A general description of the switch, but not including its current state. |
| 1.3.6.1.4.1.223.10.6.18.1.4 | ColumnuemSwitchContext | read-only | mandatory | A description of the meaning of the current switch status such as 'Open', 'Closed' etc. |
| 1.3.6.1.4.1.223.10.6.18.1.5 | ColumnuemSwitchCurrentState | read-only | mandatory | The current state of the switch. This variable can be compared with uemSwitchExpectedState to determine if the switch is in the unusual state. |
| 1.3.6.1.4.1.223.10.6.18.1.6 | ColumnuemSwitchExpectedState | read-only | mandatory | The normal state expected for this switch in a properly operating system. |
| 1.3.6.1.4.1.223.10.6.18.1.7 | ColumnuemSwitchEnabled | read-only | mandatory | If this field is FALSE, the switch is disabled. No traps will be sent from a disabled switch. |
| 1.3.6.1.4.1.223.10.7 | NodecfgAgent | |||
| 1.3.6.1.4.1.223.10.7.1 | ScalarcfgAgentVersion | read-only | mandatory | The internal version number of this SNMP Extension Agent. |
| 1.3.6.1.4.1.223.10.7.2 | ScalarcfgAgentRevision | read-only | mandatory | The internal revision number of this SNMP Extension Agent. |
| 1.3.6.1.4.1.223.10.7.3 | ScalarcfgAgentMIBVersion | read-only | mandatory | The internal version number of the MIB for this SNMP Extension Agent. |
| 1.3.6.1.4.1.223.10.7.4 | ScalarcfgAgentMIBRevision | read-only | mandatory | The internal revision number of the MIB for this SNMP Extension Agent. |
| 1.3.6.1.4.1.223.10.7.5 | ScalarcfgAgentBIOSVendor | read-only | mandatory | A description of the system BIOS vendor. |
| 1.3.6.1.4.1.223.10.7.6 | ScalarcfgAgentBIOSVersion | read-only | mandatory | A description of the version of the system vendor's BIOS. |
| 1.3.6.1.4.1.223.10.7.7 | ScalarcfgAgentBIOSDate | read-only | mandatory | The date that the system BIOS was created. |
| 1.3.6.1.4.1.223.10.7.8 | ScalarcfgAgentBIOSsROMInKb | read-only | mandatory | The size of the BIOS read-only memory in kilobytes. |
| 1.3.6.1.4.1.223.10.7.9 | ScalarcfgAgentBIOSBusSupport | read-only | mandatory | The bus interface(s) supported by the system BIOS. |
| 1.3.6.1.4.1.223.10.7.10 | ScalarcfgAgentBIOSAddress | read-only | mandatory | The memory address used to access the system BIOS. |
| 1.3.6.1.4.1.223.10.7.11 | ScalarcfgAgentBIOSInterruptId | read-only | mandatory | The interrupt ID used to access the system BIOS. |
| 1.3.6.1.4.1.223.10.7.12 | ScalarcfgAgentnCPUs | read-only | mandatory | The number of CPUs listed in the subsequent CPUs table. |
| 1.3.6.1.4.1.223.10.7.13 | TablecfgAgentCPUsTbl | not-accessible | mandatory | CPU table consisting of a list of system CPUs. |
| 1.3.6.1.4.1.223.10.7.13.1 | RowcfgAgentCPUsTblEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.223.10.7.13.1.1 | ColumncfgAgentCPUClass | read-only | mandatory | The class of central processor (eg: Intel x86). |
| 1.3.6.1.4.1.223.10.7.13.1.2 | ColumncfgAgentCPUName | read-only | mandatory | The vendor's name for the CPU (eg: 80486). |
| 1.3.6.1.4.1.223.10.7.13.1.3 | ColumncfgAgentCPUVendor | read-only | mandatory | The vendor of the CPU chipset (eg: Genuine Intel). |
| 1.3.6.1.4.1.223.10.7.13.1.4 | ColumncfgAgentCPUSpeed | read-only | mandatory | The approximate operating frequency (in MHz) of the CPU chipset. |
| 1.3.6.1.4.1.223.10.7.13.1.5 | ColumncfgAgentCPUsCacheInKb | read-only | mandatory | The size (in kilobytes) of the CPU operational memory cache. |
| 1.3.6.1.4.1.223.10.7.13.1.6 | ColumncfgAgentCPUState | read-only | mandatory | The current state of the CPU: active(1), disabled(2). |
| 1.3.6.1.4.1.223.10.7.14 | ScalarcfgAgentSysName | read-only | mandatory | The (network) name of this computer. |
| 1.3.6.1.4.1.223.10.7.15 | ScalarcfgAgentSysBoardVersion | read-only | mandatory | The vendor's board version information. |
| 1.3.6.1.4.1.223.10.7.16 | ScalarcfgAgentSysUptimeMilSec | read-only | mandatory | The length of time that this system has been active (in miliseconds). |
| 1.3.6.1.4.1.223.10.7.17 | ScalarcfgAgentSysOS | read-only | mandatory | The operating system and its version running on this system. |
| 1.3.6.1.4.1.223.10.7.18 | ScalarcfgAgentSysnDMAs | read-only | mandatory | The number of DMA channels available on this system. |
| 1.3.6.1.4.1.223.10.7.19 | ScalarcfgAgentnIRQs | read-only | mandatory | The number of IRQs listed in the subsequent IRQs table. |
| 1.3.6.1.4.1.223.10.7.20 | TablecfgAgentIRQsTbl | not-accessible | mandatory | IRQ table consisting of a list of IRQs allocated on this system. |
| 1.3.6.1.4.1.223.10.7.20.1 | RowcfgAgentIRQsTblEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.223.10.7.20.1.1 | ColumncfgAgentIRQ | read-only | mandatory | The allocated IRQ number. |
| 1.3.6.1.4.1.223.10.7.20.1.2 | ColumncfgAgentIRQOwner | read-only | mandatory | The name of the device/controller that has allocated this IRQ. |
| 1.3.6.1.4.1.223.10.7.20.1.3 | ColumncfgAgentIRQBus | read-only | mandatory | The bus that the IRQ device/controller uses. |
| 1.3.6.1.4.1.223.10.7.20.1.4 | ColumncfgAgentIRQClass | read-only | mandatory | The class of the device/controller that has allocated this IRQ. |
| 1.3.6.1.4.1.223.10.7.21 | ScalarcfgAgentMemSizeInMb | read-only | mandatory | The size of physical memory on the system in megabytes. |
| 1.3.6.1.4.1.223.10.7.22 | ScalarcfgAgentMemType | read-only | mandatory | A description of the type of memory installed on the system. |
| 1.3.6.1.4.1.223.10.7.23 | ScalarcfgAgentMemSpeed | read-only | mandatory | The operating speed (in MHz) of the memory installed on the system. |
| 1.3.6.1.4.1.223.10.7.24 | ScalarcfgAgentMemCacheInKb | read-only | mandatory | The size of the memory hardware cache in kilobytes. |
| 1.3.6.1.4.1.223.10.7.25 | ScalarcfgAgentMemBanks | read-only | mandatory | The number of memory banks on this system. |
| 1.3.6.1.4.1.223.10.7.26 | ScalarcfgAgentMemSpeedSupported | read-only | mandatory | The supported speed (in MHz) of memory installed on the system. |
| 1.3.6.1.4.1.223.10.7.27 | ScalarcfgAgentIOKbdType | read-only | mandatory | The type of keyboard in use on the system. |
| 1.3.6.1.4.1.223.10.7.28 | ScalarcfgAgentIOMouseType | read-only | mandatory | The type of mouse in use on the system. |
| 1.3.6.1.4.1.223.10.7.29 | ScalarcfgAgentIOVidType | read-only | mandatory | The type of display monitor in use on the system. |
| 1.3.6.1.4.1.223.10.7.30 | ScalarcfgAgentnSerials | read-only | mandatory | The number of serial ports listed in the subsequent serial ports table. |
| 1.3.6.1.4.1.223.10.7.31 | TablecfgAgentSerialsTbl | not-accessible | mandatory | Serial port table consisting of a list of serial ports. |
| 1.3.6.1.4.1.223.10.7.31.1 | RowcfgAgentSerialsTblEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.223.10.7.31.1.1 | ColumncfgAgentSerialPort | read-only | mandatory | The serial I/O port controller's port address. |
| 1.3.6.1.4.1.223.10.7.32 | ScalarcfgAgentnParallels | read-only | mandatory | The number of parallel ports listed in the subsequent parallel ports table. |
| 1.3.6.1.4.1.223.10.7.33 | TablecfgAgentParallelsTbl | not-accessible | mandatory | Parallel port table consisting of a list of parallel ports. |
| 1.3.6.1.4.1.223.10.7.33.1 | RowcfgAgentParallelsTblEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.223.10.7.33.1.1 | ColumncfgAgentParallelPort | read-only | mandatory | The parallel I/O port controller's port address. |
| 1.3.6.1.4.1.223.10.7.34 | ScalarcfgAgentnControllers | read-only | mandatory | The number of controllers listed in the subsequent controllers table. |
| 1.3.6.1.4.1.223.10.7.35 | TablecfgAgentControllersTbl | not-accessible | mandatory | Controller table consisting of a list of controllers. |
| 1.3.6.1.4.1.223.10.7.35.1 | RowcfgAgentControllersTblEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.223.10.7.35.1.1 | ColumncfgAgentControllerType | read-only | mandatory | The type of device controller. |
| 1.3.6.1.4.1.223.10.7.35.1.2 | ColumncfgAgentControllerName | read-only | mandatory | The controller's device name. |
| 1.3.6.1.4.1.223.10.7.35.1.3 | ColumncfgAgentControllerIRQ | read-only | mandatory | The IRQ number used by the device controller. |
| 1.3.6.1.4.1.223.10.7.36 | ScalarcfgAgentnTrapDests | read-only | mandatory | The number of trap destinations listed in the subsequent trap destinations table. |
| 1.3.6.1.4.1.223.10.7.37 | TablecfgAgentTrapDestsTbl | not-accessible | mandatory | Trap destinations table consisting of a list of trap destinations. |
| 1.3.6.1.4.1.223.10.7.37.1 | RowcfgAgentTrapDestsTblEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.223.10.7.37.1.1 | ColumncfgAgentTrapDestId | read-only | mandatory | The identifier of this trap destination. |
| 1.3.6.1.4.1.223.10.7.37.1.2 | ColumncfgAgentTrapDestIPAddr | read-write | mandatory | The IP address of this trap destination. |
| 1.3.6.1.4.1.223.10.8 | NodenetAgent | |||
| 1.3.6.1.4.1.223.10.8.1 | ScalarnetAgentVersion | read-only | mandatory | The internal version number of this SNMP Extension Agent. |
| 1.3.6.1.4.1.223.10.8.2 | ScalarnetAgentRevision | read-only | mandatory | The internal revision number of this SNMP Extension Agent. |
| 1.3.6.1.4.1.223.10.8.3 | ScalarnetAgentMIBVersion | read-only | mandatory | The internal version number of the MIB for this SNMP Extension Agent. |
| 1.3.6.1.4.1.223.10.8.4 | ScalarnetAgentMIBRevision | read-only | mandatory | The internal revision number of the MIB for this SNMP Extension Agent. |
| 1.3.6.1.4.1.223.10.8.5 | ScalarnetAgentMachineName | read-only | mandatory | The network (NetBIOS) name of this computer. |
| 1.3.6.1.4.1.223.10.8.6 | ScalarnetAgentLogonServer | read-only | mandatory | The network domain name that this computer is connected to. |
| 1.3.6.1.4.1.223.10.8.7 | ScalarnetAgentnNICs | read-only | mandatory | The number of network interface cards (NIC) listed in the subsequent NIC table. |
| 1.3.6.1.4.1.223.10.8.8 | TablenetAgentNICsTbl | not-accessible | mandatory | Network interface cards (NIC) table consisting of a list of installed system NICs. |
| 1.3.6.1.4.1.223.10.8.8.1 | RownetAgentNICTblEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.223.10.8.8.1.1 | ColumnnetAgentVendorID | read-only | mandatory | The manufacturer's internal network adapter card identification string. |
| 1.3.6.1.4.1.223.10.8.8.1.2 | ColumnnetAgentMACAddress | read-only | mandatory | The network adapter card's unique network address. |
| 1.3.6.1.4.1.223.10.8.8.1.3 | ColumnnetAgentFirmwareVersion | read-only | mandatory | The manufacturer's network adapter card firmware version. |
| 1.3.6.1.4.1.223.10.8.8.1.4 | ColumnnetAgentFirmwareRevision | read-only | mandatory | The manufacturer's network adapter card firmware revision. |
| 1.3.6.1.4.1.223.10.8.8.1.5 | ColumnnetAgentControllerType | read-only | mandatory | The type of PC bus connector used by this network adapter card. |
| 1.3.6.1.4.1.223.10.8.8.1.6 | ColumnnetAgentControllerPort | read-only | mandatory | The controller port number/address used by this network adapter card. |
| 1.3.6.1.4.1.223.10.8.8.1.7 | ColumnnetAgentControllerIRQ | read-only | mandatory | The controller IRQ number used by this network adapter card. |
| 1.3.6.1.4.1.223.10.8.8.1.8 | ColumnnetAgentControllerBaseIO | read-only | mandatory | The controller base IO address used by this network adapter card. |
| 1.3.6.1.4.1.223.10.8.8.1.9 | ColumnnetAgentDataSent | read-only | mandatory | The number of network packets sent by this computer. |
| 1.3.6.1.4.1.223.10.8.8.1.10 | ColumnnetAgentDataReceived | read-only | mandatory | The number of network packets received by this computer. |
| 1.3.6.1.4.1.223.10.8.8.1.11 | ColumnnetAgentNICDriver | read-only | mandatory | The network adapter card's driver specification. |
| 1.3.6.1.4.1.223.10.8.8.1.12 | ColumnnetAgentDriverName | read-only | mandatory | The network adapter card's driver name. |
| 1.3.6.1.4.1.223.10.9 | NodesftAgent | |||
| 1.3.6.1.4.1.223.10.9.1 | ScalarsftAgentVersion | read-only | mandatory | The internal version number of this SNMP Extension Agent. |
| 1.3.6.1.4.1.223.10.9.2 | ScalarsftAgentRevision | read-only | mandatory | The internal revision number of this SNMP Extension Agent. |
| 1.3.6.1.4.1.223.10.9.3 | ScalarsftAgentMIBVersion | read-only | mandatory | The internal version number of the MIB for this SNMP Extension Agent. |
| 1.3.6.1.4.1.223.10.9.4 | ScalarsftAgentMIBRevision | read-only | mandatory | The internal revision number of the MIB for this SNMP Extension Agent. |
| 1.3.6.1.4.1.223.10.9.5 | ScalarsftAgentnPackages | read-only | mandatory | The number of Packages listed in the subsequent Packages table. |
| 1.3.6.1.4.1.223.10.9.6 | TablesftAgentPackagesTbl | not-accessible | mandatory | Package table consisting of a list of uninstallable packages. |
| 1.3.6.1.4.1.223.10.9.6.1 | RowsftAgentPackagesTblEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.223.10.9.6.1.1 | ColumnsftAgentPackage | read-only | mandatory | The name of the package that can be uninstalled. |
| 1.3.6.1.4.1.223.10.9.7 | ScalarsftAgentnServices | read-only | mandatory | The number of Services listed in the subsequent Services table. |
| 1.3.6.1.4.1.223.10.9.8 | TablesftAgentServicesTbl | not-accessible | mandatory | Service table consisting of a list of installed system services. |
| 1.3.6.1.4.1.223.10.9.8.1 | RowsftAgentServicesTblEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.223.10.9.8.1.1 | ColumnsftAgentService | read-only | mandatory | The name of the service that has been installed. |
| 1.3.6.1.4.1.223.10.9.8.1.2 | ColumnsftAgentServiceStartup | read-only | mandatory | The service startup mode: boot(0), system(1), auto(2), manual(3), disabled(4). |
| 1.3.6.1.4.1.223.10.9.9 | ScalarsftAgentnDevices | read-only | mandatory | The number of Devices listed in the subsequent Devices table. |
| 1.3.6.1.4.1.223.10.9.10 | TablesftAgentDevicesTbl | not-accessible | mandatory | Device table consisting of a list of installed system devices. |
| 1.3.6.1.4.1.223.10.9.10.1 | RowsftAgentDevicesTblEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.223.10.9.10.1.1 | ColumnsftAgentDevice | read-only | mandatory | The name of the device that has been installed. |
| 1.3.6.1.4.1.223.10.9.10.1.2 | ColumnsftAgentDeviceStartup | read-only | mandatory | The device startup mode: boot(0), system(1), auto(2), manual(3), disabled(4). |
| 1.3.6.1.4.1.223.10.10 | NodestrAgent | |||
| 1.3.6.1.4.1.223.10.10.1 | NodestrAgentStateTrap | The disk drive is no longer accessable (off-line). | ||
| 1.3.6.1.4.1.223.10.10.1 | ScalarstrAgentVersion | read-only | mandatory | The internal version number of this SNMP Extension Agent. |
| 1.3.6.1.4.1.223.10.10.2 | ScalarstrAgentRevision | read-only | mandatory | The internal revision number of this SNMP Extension Agent. |
| 1.3.6.1.4.1.223.10.10.2 | NodestrAgentSpaceTrap | The space used on the volume has exceeded the indicated threshhold. | ||
| 1.3.6.1.4.1.223.10.10.3 | ScalarstrAgentMIBVersion | read-only | mandatory | The internal version number of the MIB for this SNMP Extension Agent. |
| 1.3.6.1.4.1.223.10.10.3 | NodestrAgentSmartTrap | The condition of the disk drive has degraded. It should be archived and replaced immediately to avoid data loss due to failure. | ||
| 1.3.6.1.4.1.223.10.10.4 | ScalarstrAgentMIBRevision | read-only | mandatory | The internal revision number of the MIB for this SNMP Extension Agent. |
| 1.3.6.1.4.1.223.10.10.5 | ScalarstrAgentnControllers | read-only | mandatory | The number of disk controllers listed in the subsequent Controllers table. |
| 1.3.6.1.4.1.223.10.10.6 | TablestrAgentControllersTbl | not-accessible | mandatory | Controller table consisting of a list of uninstallable Controllers. |
| 1.3.6.1.4.1.223.10.10.6.1 | RowstrAgentControllersTblEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.223.10.10.6.1.1 | ColumnstrAgentCtlrType | read-only | mandatory | The type of the controller: SCSI or IDE. |
| 1.3.6.1.4.1.223.10.10.6.1.2 | ColumnstrAgentCtlrVendor | read-only | mandatory | The name of the controller's vendor. |
| 1.3.6.1.4.1.223.10.10.6.1.3 | ColumnstrAgentCtlrFirmware | read-only | mandatory | The description of the controller's firmware version. |
| 1.3.6.1.4.1.223.10.10.6.1.4 | ColumnstrAgentCtlrSerialNo | read-only | mandatory | The name of the Controller that can be uninstalled. |
| 1.3.6.1.4.1.223.10.10.6.1.5 | ColumnstrAgentCtlrDMA | read-only | mandatory | The DMA number used by the controller. |
| 1.3.6.1.4.1.223.10.10.6.1.6 | ColumnstrAgentCtlrIRQ | read-only | mandatory | The IRQ number used by the controller. |
| 1.3.6.1.4.1.223.10.10.6.1.7 | ColumnstrAgentCtlrAddress | read-only | mandatory | The memory address used by the controller. |
| 1.3.6.1.4.1.223.10.10.6.1.8 | ColumnstrAgentCtlrIOPort | read-only | mandatory | The I/O port number used by the controller. |
| 1.3.6.1.4.1.223.10.10.7 | ScalarstrAgentnDisks | read-only | mandatory | The number of Disks listed in the subsequent Disks table. |
| 1.3.6.1.4.1.223.10.10.8 | TablestrAgentDisksTbl | not-accessible | mandatory | Disk table consisting of a list of installed system disks. |
| 1.3.6.1.4.1.223.10.10.8.1 | RowstrAgentDisksTblEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.223.10.10.8.1.1 | ColumnstrAgentDiskVendor | read-only | mandatory | The vendor of this disk device. |
| 1.3.6.1.4.1.223.10.10.8.1.2 | ColumnstrAgentDiskDescription | read-only | mandatory | A description of the type of device. |
| 1.3.6.1.4.1.223.10.10.8.1.3 | ColumnstrAgentDiskFirmware | read-only | mandatory | The description of the device's firmware version. |
| 1.3.6.1.4.1.223.10.10.8.1.4 | ColumnstrAgentDiskPort | read-only | mandatory | The SCSI port this device is attached to. |
| 1.3.6.1.4.1.223.10.10.8.1.5 | ColumnstrAgentDiskBus | read-only | mandatory | The SCSI bus number on the SCSI port that this device is attached to. |
| 1.3.6.1.4.1.223.10.10.8.1.6 | ColumnstrAgentDiskLUN | read-only | mandatory | This SCSI device's logical unit number (LUN). |
| 1.3.6.1.4.1.223.10.10.8.1.7 | ColumnstrAgentDiskID | read-only | mandatory | This SCSI device's SCSI ID. |
| 1.3.6.1.4.1.223.10.10.8.1.8 | ColumnstrAgentDiskSerialNo | read-only | mandatory | The vendor's serial number for the device. |
| 1.3.6.1.4.1.223.10.10.8.1.9 | ColumnstrAgentDisknSectors | read-only | mandatory | The number of sectors (512b) that this device can store. |
| 1.3.6.1.4.1.223.10.10.8.1.10 | ColumnstrAgentDiskDriveLetters | read-only | mandatory | A list of the drive letters that have storage on this device. |
| 1.3.6.1.4.1.223.10.10.8.1.11 | ColumnstrAgentDiskSizeInMb | read-only | mandatory | The capacity (in megabytes) of this device. |
| 1.3.6.1.4.1.223.10.10.8.1.12 | ColumnstrAgentDiskState | read-only | mandatory | The operational state of the device: accessable(1), off-line(2). |
| 1.3.6.1.4.1.223.10.10.8.1.13 | ColumnstrAgentDiskXfersPerSec | read-only | mandatory | the number of disk transfers per second reported by this device. |
| 1.3.6.1.4.1.223.10.10.8.1.14 | ColumnstrAgentDiskSmartCond | read-only | mandatory | The SMART condition of the device: unknown(0), safe(1), degraded(2). |
| 1.3.6.1.4.1.223.10.10.9 | ScalarstrAgentnFloppies | read-only | mandatory | The number of floppy drives listed in the subsequent Floppies table. |
| 1.3.6.1.4.1.223.10.10.10 | TablestrAgentFloppyTbl | not-accessible | mandatory | Floppy table consisting of a list of floppy devices. |
| 1.3.6.1.4.1.223.10.10.10.1 | RowstrAgentFloppyTblEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.223.10.10.10.1.1 | ColumnstrAgentFlopVendor | read-only | mandatory | The vendor information for this floppy drive. |
| 1.3.6.1.4.1.223.10.10.10.1.2 | ColumnstrAgentFlopDescription | read-only | mandatory | The vendor's description of this floppy drive. |
| 1.3.6.1.4.1.223.10.10.10.1.3 | ColumnstrAgentFlopFirmware | read-only | mandatory | The description and version information from this floppy drive's firmware |
| 1.3.6.1.4.1.223.10.10.10.1.4 | ColumnstrAgentFlopSerialNo | read-only | mandatory | The serial number of this floppy drive. |
| 1.3.6.1.4.1.223.10.10.11 | NodestrAgentStateOkTrap | The disk drive is again accessable (on-line). | ||
| 1.3.6.1.4.1.223.10.10.11 | ScalarstrAgentnVolumes | read-only | mandatory | The number of volumes listed in the subsequent Volumes table. |
| 1.3.6.1.4.1.223.10.10.12 | NodestrAgentSpaceOkTrap | The space used on the volume has returned to an acceptable level. | ||
| 1.3.6.1.4.1.223.10.10.12 | TablestrAgentVolumesTbl | not-accessible | mandatory | Volume table consisting of a list of installed storage volumes. |
| 1.3.6.1.4.1.223.10.10.12.1 | RowstrAgentVolumesTblEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.223.10.10.12.1.1 | ColumnstrAgentVolDriveLetter | read-only | mandatory | The drive letter that allows access to this storage volume. |
| 1.3.6.1.4.1.223.10.10.12.1.2 | ColumnstrAgentVolDriveLabel | read-only | mandatory | The label assigned to this volume (for display purposes). |
| 1.3.6.1.4.1.223.10.10.12.1.3 | ColumnstrAgentVolFileSystemType | read-only | mandatory | The type of file system configured for this volume (eg: FAT, NTFS). |
| 1.3.6.1.4.1.223.10.10.12.1.4 | ColumnstrAgentVolCapacityInMb | read-only | mandatory | The size (in megabytes) of this storage volume. |
| 1.3.6.1.4.1.223.10.10.12.1.5 | ColumnstrAgentVolClusterSize | read-only | mandatory | The size of each cluster (storage unit) in sectors (512 bytes). |
| 1.3.6.1.4.1.223.10.10.12.1.6 | ColumnstrAgentVolPercentUsed | read-only | mandatory | The percent of volume storage space used (monitored by the agent). |
| 1.3.6.1.4.1.223.10.10.13 | NodestrAgentSmartOKTrap | The degraded condition of the disk drive has cleared. Continue to monitor this drive's performance to ensure the integrity of its data. | ||
| 1.3.6.1.4.1.223.10.10.13 | ScalarstrAgentStateThreshhold | read-write | mandatory | Indicates whether a drive that goes off-line should cause an alert. (1 = yes) |
| 1.3.6.1.4.1.223.10.10.14 | ScalarstrAgentSpaceThreshhold | read-write | mandatory | Indicates the maximum disk consumption (%) allowed before an alert is issued. |
| 1.3.6.1.4.1.223.10.10.99 | ScalarstrAgentIndex | not-accessible | mandatory | Indicates the number (starting from 1) of the unit reported in an alert message. |
| 1.3.6.1.4.1.223.10.11 | NodesysAgent | |||
| 1.3.6.1.4.1.223.10.11.1 | NodesysAgentMemTrap | The percentage of memory in use has exceeded the indicated threshhold. | ||
| 1.3.6.1.4.1.223.10.11.1 | ScalarsysAgentVersion | read-only | mandatory | The internal version number of this SNMP Extension Agent. |
| 1.3.6.1.4.1.223.10.11.2 | NodesysAgentPageTrap | The number of page faults has exceeded the indicated threshhold. | ||
| 1.3.6.1.4.1.223.10.11.2 | ScalarsysAgentRevision | read-only | mandatory | The internal revision number of this SNMP Extension Agent. |
| 1.3.6.1.4.1.223.10.11.3 | ScalarsysAgentMIBVersion | read-only | mandatory | The internal version number of the MIB for this SNMP Extension Agent. |
| 1.3.6.1.4.1.223.10.11.4 | ScalarsysAgentMIBRevision | read-only | mandatory | The internal revision number of the MIB for this SNMP Extension Agent. |
| 1.3.6.1.4.1.223.10.11.5 | ScalarsysAgentCPUCyclesUsed | read-only | mandatory | The percentage of CPU cycles used. |
| 1.3.6.1.4.1.223.10.11.6 | ScalarsysAgentPCICyclesUsed | read-only | mandatory | The percentage of PCI bus cycles used. |
| 1.3.6.1.4.1.223.10.11.7 | ScalarsysAgentInterrupts | read-only | mandatory | The number of interrupts processed per second. |
| 1.3.6.1.4.1.223.10.11.8 | ScalarsysAgentMemorySize | read-only | mandatory | The size of memory in bytes. |
| 1.3.6.1.4.1.223.10.11.9 | ScalarsysAgentMemoryUsed | read-only | mandatory | The percentage of memory in use. |
| 1.3.6.1.4.1.223.10.11.10 | ScalarsysAgentPageFaults | read-only | mandatory | The number of page faults per second. |
| 1.3.6.1.4.1.223.10.11.11 | NodesysAgentMemOkTrap | The percentage of memory in use has returned to an accecptable level. | ||
| 1.3.6.1.4.1.223.10.11.11 | ScalarsysAgentPageFaultThreshhold | read-write | mandatory | The minimum number of page faults per second that will generate an alert. |
| 1.3.6.1.4.1.223.10.11.12 | ScalarsysAgentMemoryThreshhold | read-write | mandatory | The minimum amount of memory consumption that will generate an alert. |
| 1.3.6.1.4.1.223.10.11.12 | NodesysAgentPageOkTrap | The number of page faults has returned to an accecptable level. | ||
| 1.3.6.1.4.1.223.10.11.99 | ScalarsysAgentIndex | not-accessible | mandatory | Indicates the number (starting from 1) of the unit reported in an alert message. (Not used in this agent.) |
| 1.3.6.1.4.1.223.10.12 | NodeecmAgent | |||
| 1.3.6.1.4.1.223.10.12.1 | NodeecmAgentFanTrap | The indicated fan is no longer operational. | ||
| 1.3.6.1.4.1.223.10.12.1 | ScalarecmAgentVersion | read-only | mandatory | The internal version number of this SNMP Extension Agent. |
| 1.3.6.1.4.1.223.10.12.2 | NodeecmAgentPowerTrap | The indicated power supply is no longer operational. | ||
| 1.3.6.1.4.1.223.10.12.2 | ScalarecmAgentRevision | read-only | mandatory | The internal revision number of this SNMP Extension Agent. |
| 1.3.6.1.4.1.223.10.12.3 | ScalarecmAgentMIBVersion | read-only | mandatory | The internal version number of the MIB for this SNMP Extension Agent. |
| 1.3.6.1.4.1.223.10.12.3 | NodeecmAgentVoltCritTrap | The indicated voltage level has exceeded a critical threshold. | ||
| 1.3.6.1.4.1.223.10.12.4 | ScalarecmAgentMIBRevision | read-only | mandatory | The internal revision number of the MIB for this SNMP Extension Agent. |
| 1.3.6.1.4.1.223.10.12.4 | NodeecmAgentVoltWarnTrap | The indicated voltage level is in the warning range of values. | ||
| 1.3.6.1.4.1.223.10.12.5 | ScalarecmAgentFirmwareVersion | read-only | mandatory | The manufacturer's environmental monitoring hardware firmware version. |
| 1.3.6.1.4.1.223.10.12.5 | NodeecmAgentVoltNormTrap | The indicated voltage level has returned to an acceptable level. | ||
| 1.3.6.1.4.1.223.10.12.6 | NodeecmAgentTempCritTrap | The indicated temperature level has exceeded a critical threshold. | ||
| 1.3.6.1.4.1.223.10.12.6 | ScalarecmAgentnFans | read-only | mandatory | The number of fans listed in the subsequent Fan table. |
| 1.3.6.1.4.1.223.10.12.7 | TableecmAgentFansTbl | not-accessible | mandatory | Fan table consisting of a list of installed system fans. |
| 1.3.6.1.4.1.223.10.12.7 | NodeecmAgentTempWarnTrap | The indicated temperature level is in the warning range of values. | ||
| 1.3.6.1.4.1.223.10.12.7.1 | RowecmAgentFanTblEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.223.10.12.7.1.1 | ColumnecmAgentFanPresent | read-only | mandatory | Indicates that this fan is present on the system (1 = yes, 2 = no). |
| 1.3.6.1.4.1.223.10.12.7.1.2 | ColumnecmAgentFanState | read-only | mandatory | Indicates that this fan is operational (1 = yes, 2 = no). |
| 1.3.6.1.4.1.223.10.12.8 | NodeecmAgentTempNormTrap | The indicated temperature level has returned to an acceptable level. | ||
| 1.3.6.1.4.1.223.10.12.8 | ScalarecmAgentnPowers | read-only | mandatory | The number of power supplies listed in the subsequent Power supply table. |
| 1.3.6.1.4.1.223.10.12.9 | TableecmAgentPowersTbl | not-accessible | mandatory | Power table consisting of a list of installed system power supplies. |
| 1.3.6.1.4.1.223.10.12.9.1 | RowecmAgentPowerTblEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.223.10.12.9.1.1 | ColumnecmAgentPowerPresent | read-only | mandatory | Indicates that this power supply is present on the system (1 = yes, 2 = no). |
| 1.3.6.1.4.1.223.10.12.9.1.2 | ColumnecmAgentPowerState | read-only | mandatory | Indicates that this power supply is operational (1 = yes, 2 = no). |
| 1.3.6.1.4.1.223.10.12.10 | ScalarecmAgentnVolts | read-only | mandatory | The number of Volts listed in the subsequent Volt table. |
| 1.3.6.1.4.1.223.10.12.11 | NodeecmAgentFanOKTrap | The indicated fan is again operational. | ||
| 1.3.6.1.4.1.223.10.12.11 | TableecmAgentVoltsTbl | not-accessible | mandatory | Volt table consisting of a list of installed system Volts. |
| 1.3.6.1.4.1.223.10.12.11.1 | RowecmAgentVoltTblEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.223.10.12.11.1.1 | ColumnecmAgentVoltage | read-only | mandatory | The current voltage reading at this voltage level. |
| 1.3.6.1.4.1.223.10.12.11.1.2 | ColumnecmAgentVoltLowFail | read-only | mandatory | The low failure limit for the voltage threshold value. |
| 1.3.6.1.4.1.223.10.12.11.1.3 | ColumnecmAgentVoltLowWarn | read-only | mandatory | The low warning limit for the voltage threshold value. |
| 1.3.6.1.4.1.223.10.12.11.1.4 | ColumnecmAgentVoltHighWarn | read-only | mandatory | The high warning limit for the voltage threshold value. |
| 1.3.6.1.4.1.223.10.12.11.1.5 | ColumnecmAgentVoltHighFail | read-only | mandatory | The high failure limit for the voltage threshold value. |
| 1.3.6.1.4.1.223.10.12.11.1.6 | ColumnecmAgentVoltState | read-only | mandatory | The relative state of the voltage level (1 = low failure, 2 = low warning, 3 = normal, 4 = high warning, 5 = high failure). |
| 1.3.6.1.4.1.223.10.12.12 | NodeecmAgentPowerOKTrap | The indicated power supply is again operational. | ||
| 1.3.6.1.4.1.223.10.12.12 | ScalarecmAgentnTemps | read-only | mandatory | The number of Temps listed in the subsequent Temp table. |
| 1.3.6.1.4.1.223.10.12.13 | TableecmAgentTempsTbl | not-accessible | mandatory | Temp table consisting of a list of installed system Temps. |
| 1.3.6.1.4.1.223.10.12.13.1 | RowecmAgentTempTblEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.223.10.12.13.1.1 | ColumnecmAgentTemperature | read-only | mandatory | The current temperature reading at this temperature level. |
| 1.3.6.1.4.1.223.10.12.13.1.2 | ColumnecmAgentTempLowFail | read-only | mandatory | The low failure limit for the temperature threshold value. |
| 1.3.6.1.4.1.223.10.12.13.1.3 | ColumnecmAgentTempLowWarn | read-only | mandatory | The low warning limit for the temperature threshold value. |
| 1.3.6.1.4.1.223.10.12.13.1.4 | ColumnecmAgentTempHighWarn | read-only | mandatory | The high warning limit for the temperature threshold value. |
| 1.3.6.1.4.1.223.10.12.13.1.5 | ColumnecmAgentTempHighFail | read-only | mandatory | The high failure limit for the temperature threshold value. |
| 1.3.6.1.4.1.223.10.12.13.1.6 | ColumnecmAgentTempState | read-only | mandatory | The relative state of the temperature level (1 = low failure, 2 = low warning, 3 = normal, 4 = high warning, 5 = high failure). |
| 1.3.6.1.4.1.223.10.12.14 | ScalarecmAgentnCPUs | read-only | mandatory | The number of CPUs listed in the subsequent CPU table. |
| 1.3.6.1.4.1.223.10.12.15 | TableecmAgentCPUsTbl | not-accessible | mandatory | CPU table consisting of a list of installed system CPUs. |
| 1.3.6.1.4.1.223.10.12.15.1 | RowecmAgentCPUTblEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.223.10.12.15.1.4 | ColumnecmAgentCPUUsage | read-only | mandatory | The percentage of CPU cycles used during the last sample period. |
| 1.3.6.1.4.1.223.10.12.99 | ScalarecmAgentIndex | not-accessible | mandatory | Indicates the number (starting from 1) of the unit reported in an alert message. |
| 1.3.6.1.4.1.223.10.999 | NodeevtAgent | |||
| 1.3.6.1.4.1.223.10.999.1 | ScalarevtAgentVersion | read-only | mandatory | The internal version number of this SNMP Extension Agent. |
| 1.3.6.1.4.1.223.10.999.2 | ScalarevtAgentRevision | read-only | mandatory | The internal revision number of this SNMP Extension Agent. |
| 1.3.6.1.4.1.223.10.999.3 | ScalarevtAgentMIBVersion | read-only | mandatory | The internal version number of the MIB for this SNMP Extension Agent. |
| 1.3.6.1.4.1.223.10.999.4 | ScalarevtAgentMIBRevision | read-only | mandatory | The internal revision number of the MIB for this SNMP Extension Agent. |
| 1.3.6.1.4.1.223.10.999.5 | ScalarevtAgentnEventsQueued | read-only | mandatory | The number of |
| 1.3.6.1.4.1.223.10.999.6 | ScalarevtAgentnEventsReceived | read-only | mandatory | The number of |
| 1.3.6.1.4.1.223.10.999.1000 | ScalarevtAgentIPAddress | not-accessible | mandatory | Indicates the IP address of the node that reported the DMI event. |
| 1.3.6.1.4.1.223.10.999.1001 | ScalarevtAgentSeverity | not-accessible | mandatory | Indicates the VisiNet-II severity value of the event. |
| 1.3.6.1.4.1.223.10.999.1002 | ScalarevtAgentClass | not-accessible | mandatory | Indicates the DMI event class description. |
| 1.3.6.1.4.1.223.10.999.2001 | NodedmiVirusAgent | |||
| 1.3.6.1.4.1.223.10.999.2001.1 | NodedmiVirusDetected | The DMI agent detected a virus during system initialization. | ||
| 1.3.6.1.4.1.223.10.999.2003 | NodedmiMemoryAgent | |||
| 1.3.6.1.4.1.223.10.999.2003.0 | NodedmiVirtualMemoryOK | The available virtual memory on the system is acceptable. | ||
| 1.3.6.1.4.1.223.10.999.2003.1 | NodedmiVirtualMemoryLow | The available virtual memory on the system is running low. | ||
| 1.3.6.1.4.1.223.10.999.2003.2 | NodedmiVirtualMemoryOut | The available virtual memory on the system is running out. | ||
| 1.3.6.1.4.1.223.10.999.2005 | NodedmiGDIAgent | |||
| 1.3.6.1.4.1.223.10.999.2005.0 | NodedmiGDIResourceOK | The available graphics resources on the system are acceptable. | ||
| 1.3.6.1.4.1.223.10.999.2005.1 | NodedmiGDIResourceLow | The available graphics resources on the system are running low. | ||
| 1.3.6.1.4.1.223.10.999.2005.2 | NodedmiGDIResourceOut | The available graphics resources on the system are running out. | ||
| 1.3.6.1.4.1.223.10.999.2007 | NodedmiDiskAgent | |||
| 1.3.6.1.4.1.223.10.999.2007.0 | NodedmiDiskSpaceOK | The available disk space on the system is acceptable. | ||
| 1.3.6.1.4.1.223.10.999.2007.1 | NodedmiDiskSpaceLow | The available disk space on the system is running low. | ||
| 1.3.6.1.4.1.223.10.999.2007.2 | NodedmiDiskSpaceOut | The available disk space on the system is running out. | ||
| 1.3.6.1.4.1.223.10.999.2009 | NodedmiSMARTAgent | |||
| 1.3.6.1.4.1.223.10.999.2009.1 | NodedmiSMARTFailing | The operating condition of a S.M.A.R.T. drive has degraded. Archive and replace the drive to avoid subsequent data loss. | ||
| 1.3.6.1.4.1.223.10.999.2009.2 | NodedmiSMARTNowOK | The condition of a S.M.A.R.T. drive has returned to acceptable tolerances. Continue to monitor closely the condition of the drive. | ||
| 1.3.6.1.4.1.223.10.999.2015 | NodedmiParityAgent | |||
| 1.3.6.1.4.1.223.10.999.2015.1 | NodedmiParityCorrection | The DMI agent detected a correctable memory parity error. | ||
| 1.3.6.1.4.1.223.10.999.2015.2 | NodedmiParityFailure | The DMI agent detected an uncorrectable memory parity error. | ||
| 1.3.6.1.4.1.223.10.999.2017 | NodedmiPOSTAgent | |||
| 1.3.6.1.4.1.223.10.999.2017.1 | NodedmiPOSTError | The DMI agent reported a P.O.S.T. error. |