VISM-LAPD-MIB
45 objects
No module-level DESCRIPTION found.
Imported Objects
| BASIS-MIB | voice |
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | Counter |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.351.110.5.5.12 | NodevismLapdGrp | |||
| 1.3.6.1.4.1.351.110.5.5.12.1 | TablevismLapdTable | not-accessible | mandatory | This table is used for maintaining the configuration of the LAPD channel on VISM. |
| 1.3.6.1.4.1.351.110.5.5.12.1.1 | RowvismLapdEntry | not-accessible | mandatory | An entry for vismLapdTable. |
| 1.3.6.1.4.1.351.110.5.5.12.1.1.1 | ColumnvismLapdIndex | read-only | mandatory | This is the logical index for this table. This is derived from the following formula: index = 31 * (Ds1# - 1) + ds0# where : Ds1# - The T1/E1 line number in th… |
| 1.3.6.1.4.1.351.110.5.5.12.1.1.2 | ColumnvismLapdAppType | read-write | mandatory | This object indicates the type of the LAPD interface. When the user creates a LAPD entry this object need to be specified. After creation it cannot be modified. |
| 1.3.6.1.4.1.351.110.5.5.12.1.1.3 | ColumnvismLapdWinSize | read-write | mandatory | The window size - maximum number of sequencially numbered I-frames that may be outstanding. VISM support window size range 1 to 127. |
| 1.3.6.1.4.1.351.110.5.5.12.1.1.4 | ColumnvismLapdN200 | read-write | mandatory | The maximum number of retransmissions of a frame. |
| 1.3.6.1.4.1.351.110.5.5.12.1.1.5 | ColumnvismLapdT200 | read-write | mandatory | The maximum number of time in milliseconds to wait for acknowledgement for a transmit frame. Transmission may be initiated. This value should be less than vism… |
| 1.3.6.1.4.1.351.110.5.5.12.1.1.6 | ColumnvismLapdT203 | read-write | mandatory | The maximum time (in milliseconds) allowed without frames being exchanged. This value should be greater than vismLapdT200. For PRI, the range is 1000 to 102300… |
| 1.3.6.1.4.1.351.110.5.5.12.1.1.7 | ColumnvismLapdType | read-write | mandatory | This object specifies what type of interface the LAPD stack will be used with. ccitt(1) : CCITT att5EssPRA(3) : AT&T 5ESS PRA att4Ess(4) : AT&T 4ESS ntDMS100PR… |
| 1.3.6.1.4.1.351.110.5.5.12.1.1.8 | ColumnvismLapdRowStatus | read-write | mandatory | Row status allows users to create or delete a LAPD entry. CreateAndGo: Use this to add an entry in this table. Before create a LAPD entry session manager shoul… |
| 1.3.6.1.4.1.351.110.5.5.12.1.1.9 | ColumnvismLapdSide | read-write | mandatory | This object specifies whether LAPD stack is on the user side or network side. This object can be set when the row is created. It can not be modified for an exi… |
| 1.3.6.1.4.1.351.110.5.5.12.1.1.10 | ColumnvismLapdTrunkType | read-only | mandatory | This object indicates if the line is configured for Trunking or PRI Backhaul. This object is set to the appropriate type when the vismRudpSessionType parameter… |
| 1.3.6.1.4.1.351.110.5.5.12.2 | TablevismLapdStatsTable | not-accessible | mandatory | This table contains statistics information for all LAPD (D channel Data Link) interfaces on VISM. |
| 1.3.6.1.4.1.351.110.5.5.12.2.1 | RowvismLapdStatsEntry | not-accessible | mandatory | An entry in the LAPD Table. |
| 1.3.6.1.4.1.351.110.5.5.12.2.1.1 | ColumnvismLapdStatsIndex | read-only | mandatory | This is the logical index for this table. It is the same as vismLapdIndex. An entry of this table will be implicitly created when a LAPD entry is added. |
| 1.3.6.1.4.1.351.110.5.5.12.2.1.2 | ColumnvismLapdRxInfoFrames | read-only | mandatory | Information frames received. |
| 1.3.6.1.4.1.351.110.5.5.12.2.1.3 | ColumnvismLapdTxInfoFrames | read-only | mandatory | Information frames transmitted. |
| 1.3.6.1.4.1.351.110.5.5.12.2.1.4 | ColumnvismLapdRxReadyFrames | read-only | mandatory | Receiver Ready frames received. |
| 1.3.6.1.4.1.351.110.5.5.12.2.1.5 | ColumnvismLapdTxReadyFrames | read-only | mandatory | Receiver Ready frames transmitted. |
| 1.3.6.1.4.1.351.110.5.5.12.2.1.6 | ColumnvismLapdRxNotReadyFrames | read-only | mandatory | Receiver Not Ready frames received. |
| 1.3.6.1.4.1.351.110.5.5.12.2.1.7 | ColumnvismLapdTxNotReadyFrames | read-only | mandatory | Receiver Not Ready frames transmitted. |
| 1.3.6.1.4.1.351.110.5.5.12.2.1.8 | ColumnvismLapdRxSABMFrames | read-only | mandatory | Set Asynchronous Balanced Mode frames received. |
| 1.3.6.1.4.1.351.110.5.5.12.2.1.9 | ColumnvismLapdTxSABMFrames | read-only | mandatory | Set Asynchronous Balanced Mode frames transmitted. |
| 1.3.6.1.4.1.351.110.5.5.12.2.1.10 | ColumnvismLapdRxDisconFrames | read-only | mandatory | Disconnect frames received. |
| 1.3.6.1.4.1.351.110.5.5.12.2.1.11 | ColumnvismLapdTxDisconFrames | read-only | mandatory | Disconnect frames transmitted. |
| 1.3.6.1.4.1.351.110.5.5.12.2.1.12 | ColumnvismLapdRxUAFrames | read-only | mandatory | Unnumbered Acknowledge frames received. |
| 1.3.6.1.4.1.351.110.5.5.12.2.1.13 | ColumnvismLapdTxUAFrames | read-only | mandatory | Unnumbered Acknowledge frames transmitted. |
| 1.3.6.1.4.1.351.110.5.5.12.2.1.14 | ColumnvismLapdRxDiscModeFrames | read-only | mandatory | Disconnect Mode frames received. |
| 1.3.6.1.4.1.351.110.5.5.12.2.1.15 | ColumnvismLapdTxDiscModeFrames | read-only | mandatory | Disconnect Mode frames transmitted. |
| 1.3.6.1.4.1.351.110.5.5.12.2.1.16 | ColumnvismLapdRxFrmRejectFrames | read-only | mandatory | Frame Reject frames received. |
| 1.3.6.1.4.1.351.110.5.5.12.2.1.17 | ColumnvismLapdTxFrmRejectFrames | read-only | mandatory | Frame Reject frames transmitted. |
| 1.3.6.1.4.1.351.110.5.5.12.2.1.18 | ColumnvismLapdRxExchIdFrames | read-only | mandatory | Exchange Id frames received. |
| 1.3.6.1.4.1.351.110.5.5.12.2.1.19 | ColumnvismLapdTxExchIdFrames | read-only | mandatory | Exchange Id frames transmitted. |
| 1.3.6.1.4.1.351.110.5.5.12.2.1.20 | ColumnvismLapdRxUnumInfoFrames | read-only | mandatory | Unnumbered Information frames received. |
| 1.3.6.1.4.1.351.110.5.5.12.2.1.21 | ColumnvismLapdTxUnumInfoFrames | read-only | mandatory | Unnumbered Information frames transmitted. |
| 1.3.6.1.4.1.351.110.5.5.12.2.1.22 | ColumnvismLapdRxRejectFrames | read-only | mandatory | Received Reject Frames. |
| 1.3.6.1.4.1.351.110.5.5.12.2.1.23 | ColumnvismLapdTxRejectFrames | read-only | mandatory | Reject frames transmitted. |
| 1.3.6.1.4.1.351.110.5.5.12.2.1.24 | ColumnvismLapdRxInvalidFrames | read-only | mandatory | Invalid frames received. |
| 1.3.6.1.4.1.351.110.5.5.12.3 | TablevismLapdDlcTable | not-accessible | mandatory | This table is used for maintaining the link state of different DLCs on a LAPD channel. An entry of this table will be implicitly created some time after a LAPD… |
| 1.3.6.1.4.1.351.110.5.5.12.3.1 | RowvismLapdDlcEntry | not-accessible | mandatory | An entry for vismLapdDlcTable. |
| 1.3.6.1.4.1.351.110.5.5.12.3.1.1 | ColumnvismLapdDlcIndex | read-only | mandatory | This object identifies the corresponding LAPD index. It is the same as vismLapdIndex. |
| 1.3.6.1.4.1.351.110.5.5.12.3.1.2 | ColumnvismLapdDlcSapi | read-only | mandatory | This is the SAPI of a specific DLC. |
| 1.3.6.1.4.1.351.110.5.5.12.3.1.3 | ColumnvismLapdDlcTei | read-only | mandatory | This is the TEI of a specific DLC. |
| 1.3.6.1.4.1.351.110.5.5.12.3.1.4 | ColumnvismLapdDlcLinkState | read-only | mandatory | This object indicate the linking state on a given DLC. |