VITALINK-MIB
142 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.29 | Nodevitalink | |||
| 1.3.6.1.4.1.29.1 | Nodevitamanagement | |||
| 1.3.6.1.4.1.29.1.1 | Nodevitasystem | |||
| 1.3.6.1.4.1.29.1.2 | Nodevitainterfaces | |||
| 1.3.6.1.4.1.29.1.2.1 | NodevIfbase | |||
| 1.3.6.1.4.1.29.1.2.1.1 | TablevifTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.29.1.2.1.1.1 | RowvifEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.29.1.2.1.1.1.1 | ColumnvifIndex | read-only | mandatory | This read-only variable identifies the port defined by the VIfEntry SEQUENCE. |
| 1.3.6.1.4.1.29.1.2.1.1.1.2 | ColumnvIfKnownUcasts | read-only | mandatory | This read-only variable displays the number of known single-destination frames received by this port. |
| 1.3.6.1.4.1.29.1.2.1.1.1.3 | ColumnvIfInLateDiscards | read-only | mandatory | This read-only variable displays the total number of received frames discarded late by this port. This number is included in the 'Frames received' total. |
| 1.3.6.1.4.1.29.1.2.1.1.1.4 | ColumnvIfInLateDiscardOctets | read-only | mandatory | This read-only variable displays the total number of bytes discarded late by this port. This number is included in the 'Bytes received' total. |
| 1.3.6.1.4.1.29.1.2.1.1.1.5 | ColumnvIfOutFilterDiscards | read-only | mandatory | This read-only variable displays the number of transmit frames discarded due to user-configured (traffic control) filters or internal system filters. |
| 1.3.6.1.4.1.29.1.2.1.1.1.6 | ColumnvIfMulticastUnkUnicastDiscards | read-only | mandatory | This read-only variable displays the number of transmit frames discarded due to multicast or unknown destination filtering. |
| 1.3.6.1.4.1.29.1.2.1.1.1.7 | ColumnvIfSystemCongestionDiscards | read-only | mandatory | This read-only variable displays the number of frames discarded because the system was low on buffers. This results from simultaneously congesting a number of … |
| 1.3.6.1.4.1.29.1.2.1.1.1.8 | ColumnvIfOutDiscardedOctets | read-only | mandatory | This read-only variable displays the total number of transmit bytes discarded by this port. |
| 1.3.6.1.4.1.29.1.2.1.1.1.9 | ColumnvIfTransmitState | read-only | mandatory | This read-only variable displays the current transmit state of the LAN port as follows: 'initializing': A transient state lasting a few milliseconds after star… |
| 1.3.6.1.4.1.29.1.2.1.1.1.10 | ColumnvIfWhyTxBroken | read-only | mandatory | When 'Transmit state' = 'broken,' this read- only variable displays the reason. |
| 1.3.6.1.4.1.29.1.2.1.1.1.11 | ColumnvIfReceiveState | read-only | mandatory | This read-only variable displays the current receive state for this port as follows: 'on': The receive function is in use. 'off': The receive function is not i… |
| 1.3.6.1.4.1.29.1.2.1.1.1.12 | ColumnvIfWhyRxBroken | read-only | mandatory | If the 'Receive state' = 'broken,' this read- only variable displays the reason. |
| 1.3.6.1.4.1.29.1.2.2 | NodevIflan | |||
| 1.3.6.1.4.1.29.1.2.2.1 | TablevIfLANTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.29.1.2.2.1.1 | RowvIfLANEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.29.1.2.2.1.1.1 | ColumnvIfLANPortIndex | read-only | mandatory | This read-only variable specifies 'group 0' as the group to be defined by the vifEntry SEQUENCE. A 'group' is one or more physical ports treated, logically, as… |
| 1.3.6.1.4.1.29.1.2.2.1.1.2 | ColumnvIfLANEarlyDiscards | read-only | mandatory | This read-only variable describes the total number of frames discarded by the LAN port. |
| 1.3.6.1.4.1.29.1.2.2.1.1.3 | ColumnvIfLANLocalDiscards | read-only | mandatory | This read-only variable specifies the number of frames discarded by the LAN port PPU because they were recognized as local traffic. |
| 1.3.6.1.4.1.29.1.2.2.1.1.4 | ColumnvIfLANLateDiscards | read-only | mandatory | This read-only variable specifies the total number of frames discarded after being received from the LAN port and counted. |
| 1.3.6.1.4.1.29.1.2.2.1.1.5 | ColumnvIfLANLateLocalDiscards | read-only | mandatory | This read-only variable describes the number of received frames discarded at the system level because they were recognized as local traffic. These 'late' local… |
| 1.3.6.1.4.1.29.1.2.2.1.1.6 | ColumnvIfLANMulticastDampings | read-only | mandatory | This read-only variable describes the number of frames that were discarded by the LAN port due to multicast damping See also 'Maximum multicasts per second,' s… |
| 1.3.6.1.4.1.29.1.2.3 | NodevIfwan | |||
| 1.3.6.1.4.1.29.1.2.3.1 | TablevIfWANTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.29.1.2.3.1.1 | RowvIfWANEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.29.1.2.3.1.1.1 | ColumnvIfWANPortIndex | read-only | mandatory | This read-only variable lists the WAN port number. |
| 1.3.6.1.4.1.29.1.2.3.1.1.2 | ColumnvIfWANMulticastCongestionDiscards | read-only | mandatory | This read-only variable describes the number of transmit frames discarded after exceeding the 'Multicast frame limit.' |
| 1.3.6.1.4.1.29.1.2.3.1.1.3 | ColumnvIfWANFrameCongestionDiscards | read-only | mandatory | This read-only variable describes the number of transmit frames discarded after exceeding the 'Tx queue frame limit.' |
| 1.3.6.1.4.1.29.1.2.3.1.1.4 | ColumnvIfWANByteCongestionDiscards | read-only | mandatory | This read-only variable describes the number of transmit frames discarded after exceeding the 'Tx queue byte limit.' |
| 1.3.6.1.4.1.29.1.2.3.1.1.5 | ColumnvIfWANUcastDampingDiscards | read-only | mandatory | This read-only variable describes the number of transmit frames discarded due to 'Single destination damping.' |
| 1.3.6.1.4.1.29.1.2.3.1.1.6 | ColumnvIfWANInitializePort | read-only | mandatory | This read-only variable specifies whether or not (init-on-reboot, no-init) this port is to be initialized when the system is rebooted. |
| 1.3.6.1.4.1.29.1.2.3.1.1.7 | ColumnvIfWANNetworkValidation | read-only | mandatory | This read-only variable specifies whether or not (enabled, disabled) Network Validation protocol is enabled. If multiple leased lines are configured in the sam… |
| 1.3.6.1.4.1.29.1.3 | Nodevitagroup | |||
| 1.3.6.1.4.1.29.1.3.1 | NodegroupBase | |||
| 1.3.6.1.4.1.29.1.3.1.1 | TablevGroupBaseTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.29.1.3.1.1.1 | RowvGroupBaseEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.29.1.3.1.1.1.1 | ColumnvGroupBaseIndex | read-only | mandatory | This read-only variable identifies the 'group' defined by the VIfEntry SEQUENCE. A 'group' is one or more physical ports treated, logically, as a single link b… |
| 1.3.6.1.4.1.29.1.3.1.1.1.2 | ColumnvGroupBaseName | read-write | mandatory | This variable specifies the name for a network group. This variable may consist of up to 15 characters and may include special characters. (Note: The first cha… |
| 1.3.6.1.4.1.29.1.3.1.1.1.3 | ColumnvGroupBaseStatus | read-only | mandatory | This read-only variable displays the current status of a WAN group. Status may be 'active,' 'broken,' or 'inactive.' 'Active' means that at least one port in t… |
| 1.3.6.1.4.1.29.1.3.1.1.1.4 | ColumnvGroupBasePortMask | read-only | mandatory | This read-only variable specifies those ports included in a network group. Up to eight ports (1P8, separated by commas) may be included in a single network gro… |
| 1.3.6.1.4.1.29.1.3.1.1.1.5 | ColumnvGroupBaseSTPEnabled | read-only | mandatory | This read-only variable specifies whether or not (stpenabled, stpdisabled) Spanning Tree Protocol is enabled on this network group. Caution: Do not change the … |
| 1.3.6.1.4.1.29.1.3.1.1.1.6 | ColumnvGroupBaseDlsEnabled | read-only | mandatory | This read-only variable specifies whether or not (dlsenabled, dlsdisabled) Distributed Load Sharing is enabled for this network group. Default = dlsenabled. |
| 1.3.6.1.4.1.29.1.4 | Nodevitabridge | |||
| 1.3.6.1.4.1.29.1.4.1 | Nodebridgebase | |||
| 1.3.6.1.4.1.29.1.4.2 | Nodebridgestp | |||
| 1.3.6.1.4.1.29.1.4.2.1 | Scalardot1dStpProtocolSpecification | read-only | mandatory | This read-only variable displays which Spanning Tree algorithm (IEEE 802.1, DEC-compatible) this bridge is using. When this system boots up, it uses IEEE 802.1… |
| 1.3.6.1.4.1.29.1.4.2.2 | ScalarvBridgeStpConvert802 | read-only | mandatory | This is a read-only variable. It is normally used when the network is running in DEC compatible mode (see item 1 on screen 1/2). Setting this variable to 'yes'… |
| 1.3.6.1.4.1.29.1.4.2.3 | ScalarvBridgeStpInterdomain | read-only | mandatory | This read-only variable specifies whether or not (true, false) this bridge is to function as an interdomain bridge. An interdomain bridge is used to partition … |
| 1.3.6.1.4.1.29.1.4.2.4 | ScalarvBridgeStpPriorityCode | read-only | mandatory | This read-only variable specifies the root priority (or priority code) for this bridge. If this value is set to 0P3, it is interpreted as a priority code that … |
| 1.3.6.1.4.1.29.1.4.2.5 | Scalardot1dStpPriority | read-only | mandatory | This read-only variable displays the priority and address of this bridge. |
| 1.3.6.1.4.1.29.1.4.2.6 | ScalarvBridgeStpCostAlgorithm | read-only | mandatory | This read-only variable specifies which costing algorithm (dec, ieee) is to be used by this bridge. |
| 1.3.6.1.4.1.29.1.4.2.7 | Scalardot1dStpDesignatedRoot | read-only | mandatory | This read-only variable displays the priority and address of the root bridge. The bridge with the lowest priority becomes the root; if two or more bridges have… |
| 1.3.6.1.4.1.29.1.4.2.8 | Scalardot1dStpRootCost | read-only | mandatory | This read-only variable displays the cost of the Inlink path to the root. |
| 1.3.6.1.4.1.29.1.4.2.9 | Scalardot1dStpRootPort | read-only | mandatory | This read-only variable displays the ID of the network group that creates the most direct, cost-effective path from this bridge to the root bridge. |
| 1.3.6.1.4.1.29.1.4.2.10 | Scalardot1dStpMaxAge | read-only | mandatory | This read-only variable displays the amount of time a bridge will wait for a hello message before attempting to find a new inlink. This value is determined by … |
| 1.3.6.1.4.1.29.1.4.2.11 | Scalardot1dStpHelloTime | read-only | mandatory | This read-only variable displays the frequency with which hello messages and network validation messages are transmitted over the network. This value is determ… |
| 1.3.6.1.4.1.29.1.4.2.12 | Scalardot1dStpHoldTime | read-only | mandatory | Displays the amount of time a bridge will wait for a hello message before attempting to find a new inlink. This value is determined by the root bridge. |
| 1.3.6.1.4.1.29.1.4.2.13 | Scalardot1dStpForwardDelay | read-only | mandatory | This read-only variable displays the length of time a network group will remain in the pre- forwarding state. Determined by the root bridge. |
| 1.3.6.1.4.1.29.1.4.2.14 | Scalardot1dStpBridgeMaxAge | read-write | mandatory | This read-write variable specifies the Listen interval to be used throughout the network if this bridge becomes the root. Range = 1P100. |
| 1.3.6.1.4.1.29.1.4.2.15 | Scalardot1dStpBridgeHelloTime | read-write | mandatory | This read-write variable specifies the Hello Interval to be used throughout the network if this bridge becomes the root. Range = 1P10 (sec). |
| 1.3.6.1.4.1.29.1.4.2.16 | Scalardot1dStpBridgeForwardDelay | read-write | mandatory | This read-write variable specifies the pre- forwarding interval to be used throughout the network if this bridge becomes the root. Range = 6P200 (seconds). |
| 1.3.6.1.4.1.29.1.4.2.17 | Scalardot1dStpTopChanges | read-only | mandatory | Displays the number of times this network group has transitioned from the pre-forwarding to the forwarding state. |
| 1.3.6.1.4.1.29.1.4.2.18 | TablevStpGroupTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.29.1.4.2.18.1 | RowvStpGroupEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.29.1.4.2.18.1.1 | ColumnvStpGroupIfIndex | read-only | mandatory | This read-only variable identifies a 'group' to be defined by the VitaStpGroupEntry SEQUENCE. A 'group' is one or more physical ports that are treated, logical… |
| 1.3.6.1.4.1.29.1.4.2.18.1.2 | ColumnvStpGroupPriority | read-only | mandatory | Specifies the root priority (or priority code) for this bridge. If this value is set to 0P3, it is interpreted as a priority code that the bridge uses to compu… |
| 1.3.6.1.4.1.29.1.4.2.18.1.3 | ColumnvStpGroupPathCost | read-only | mandatory | This read-only variable specifies the Spanning Tree cost of this network group. This value is computed by dividing a speed constant by the network speed of thi… |
| 1.3.6.1.4.1.29.1.4.2.18.1.4 | ColumnvStpGroupDesignatedRoot | read-only | mandatory | Displays the priority and address of the root bridge. The bridge with the lowest priority becomes the root; if two or more bridges have the same priority, the … |
| 1.3.6.1.4.1.29.1.4.2.18.1.5 | ColumnvStpGroupDesignatedCost | read-only | mandatory | Specifies the Spanning Tree cost of this network group. This value is computed by dividing a speed constant by the network speed of this network group. The spe… |
| 1.3.6.1.4.1.29.1.4.2.18.1.6 | ColumnvStpGroupDesignatedBridge | read-only | mandatory | Displays the priority and address of this bridge. |
| 1.3.6.1.4.1.29.1.4.2.18.1.7 | ColumnvStpGroupDesignatedGroup | read-only | mandatory | Displays the network Group number to the Designated Bridge. |
| 1.3.6.1.4.1.29.1.4.2.18.1.8 | ColumnvStpGroupBadHellos | read-only | mandatory | This read-only variable displays the total number of bad hellos received on this network group. This value also increments when a hello is received while the v… |
| 1.3.6.1.4.1.29.1.5 | Nodevitatransmission | |||
| 1.3.6.1.4.1.29.1.5.1 | Nodeserialline | |||
| 1.3.6.1.4.1.29.1.5.1.1 | Nodeserialbase | |||
| 1.3.6.1.4.1.29.1.5.1.1.1 | TablevSerialTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.29.1.5.1.1.1.1 | RowvSerialEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.29.1.5.1.1.1.1.1 | ColumnvSerialIfIndex | read-only | mandatory | This read-only variable displays the WAN port number. |
| 1.3.6.1.4.1.29.1.5.1.1.1.1.2 | ColumnvSerialLAPBEnabled | read-only | mandatory | Specifies whether or not (true, false) LAPB is enabled on this port (i.e., indicates whether data messages on this link are to have LAPB encapsulation). |
| 1.3.6.1.4.1.29.1.5.1.1.1.1.3 | ColumnvSerialConnectorType | read-only | mandatory | Displays whether this port is configured as DCE (Data Communications Equipment) or DTE (Data Terminal Equipment). When a WAN (serial) port is configured as DCE… |
| 1.3.6.1.4.1.29.1.5.1.1.1.1.4 | ColumnvSerialCTSErrors | read-only | mandatory | The number of Clear to Send (CTS) errors, indicating that CTS was dropped and communication with the modem was lost. |
| 1.3.6.1.4.1.29.1.5.1.1.1.1.5 | ColumnvSerialDCDErrors | read-only | mandatory | The number of Data Carrier Detect (DCD) errors, indicating that DCD was dropped and communication with the modem was lost. |
| 1.3.6.1.4.1.29.1.5.1.1.1.1.6 | ColumnvSerialAbortErrors | read-only | mandatory | The number of aborts received. Large numbers of aborts and/or CRC errors indicate a malfunctioning transmission media. |
| 1.3.6.1.4.1.29.1.5.1.1.1.1.7 | ColumnvSerialCRCErrors | read-only | mandatory | The number of Cyclic Redundancy Check (CRC) errors, indicating that the integrity of the data was compromised. |
| 1.3.6.1.4.1.29.1.5.1.1.1.1.8 | ColumnvSerialTransmitUnderrunErrors | read-only | mandatory | The number of times that transmission of a frame could not be completed due to being unable to supply characters fast enough. (If this value is incremented oft… |
| 1.3.6.1.4.1.29.1.5.1.1.1.1.9 | ColumnvSerialReceiverOverrunErrors | read-only | mandatory | The number of times that frames were discarded because receive buffers could not be allocated. |
| 1.3.6.1.4.1.29.1.5.1.1.1.1.10 | ColumnvSerialBypassQueueErrors | read-only | mandatory | The number of times that frames were discarded because the bypass transmit queue overflowed. |
| 1.3.6.1.4.1.29.1.5.1.2 | Nodediallink | |||
| 1.3.6.1.4.1.29.1.5.1.3 | Nodelapb | |||
| 1.3.6.1.4.1.29.1.5.1.3.1 | TablevLAPBTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.29.1.5.1.3.1.1 | RowvLAPBEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.29.1.5.1.3.1.1.1 | ColumnvLAPBPortNumber | read-only | mandatory | Displays the port number that supports LAPB. |
| 1.3.6.1.4.1.29.1.5.1.3.1.1.2 | ColumnvLAPBModulo | read-only | mandatory | Specifies whether the LAPB encapsulation is modulo 8 or modulo 128. |
| 1.3.6.1.4.1.29.1.5.1.4 | Nodeds1 | |||
| 1.3.6.1.4.1.29.1.5.1.4.1 | TablevDS1Table | not-accessible | mandatory | |
| 1.3.6.1.4.1.29.1.5.1.4.1.1 | RowvDS1Entry | not-accessible | mandatory | |
| 1.3.6.1.4.1.29.1.5.1.4.1.1.1 | ColumnvDS1PortNumber | read-only | mandatory | Displays the port number supporting DS1 interface. |
| 1.3.6.1.4.1.29.1.5.1.4.1.1.2 | ColumnvDS1ZeroCode | read-only | mandatory | Specifies the method of zero code suppression to be used as follows: INTRINSIC: Long zero strings are never generated and data bits are inverted, resulting in … |
| 1.3.6.1.4.1.29.1.5.1.4.1.1.3 | ColumnvDS1ClockSource | read-only | mandatory | Specifies whether this system functions as master (clock source) or slave. |
| 1.3.6.1.4.1.29.1.5.1.4.1.1.4 | ColumnvDS1FrameSyncLosses | read-only | mandatory | Displays the number of times frame sync was lost in the received data since startup or reset. |
| 1.3.6.1.4.1.29.1.5.1.4.1.1.5 | ColumnvDS1FrameAlignmentErrors | read-only | mandatory | Displays the number of incorrect framing bits that have been received since startup or reset. |
| 1.3.6.1.4.1.29.1.5.1.4.1.1.6 | ColumnvDS1ControlledFrameSlips | read-only | mandatory | Displays the number of times the DS1 frame buffer either inserted or omitted a frame because of excessive jitter or wander since startup or reset. |
| 1.3.6.1.4.1.29.1.5.1.4.1.1.7 | ColumnvDS1BipolarViolations | read-only | mandatory | Displays the number of bipolar violations found in received data since startup or reset (does not include bipolar violations used in B8ZCS mode). |
| 1.3.6.1.4.1.29.1.5.1.4.1.1.8 | ColumnvDS1SuperframeCRCErrors | read-only | mandatory | Displays the number of superframe CRC errors found in received data since startup or reset (ESF mode only). |
| 1.3.6.1.4.1.29.1.5.1.4.1.1.9 | ColumnvDS1ErroredSeconds | read-only | mandatory | Displays the number of errored seconds since startup or reset as follows: In D4 mode, an errored second is one in which any DS1 errors were received. In ESF mo… |
| 1.3.6.1.4.1.29.1.5.1.4.1.1.10 | ColumnvDS1SeverelyErroredSeconds | read-only | mandatory | Displays the number of severely errored seconds since startup or reset as follows: In D4 mode, a severely errored second is one in which 320 or more bipolar vi… |
| 1.3.6.1.4.1.29.1.5.1.4.1.1.11 | ColumnvDS1FailedSeconds | read-only | mandatory | Displays the number of failed seconds since startup or reset. If the number of consecutive severely errored seconds reaches 10 or more, a failed second is coun… |
| 1.3.6.1.4.1.29.1.5.2 | Nodeethernet | |||
| 1.3.6.1.4.1.29.1.5.2.1 | Tabledot3Table | not-accessible | mandatory | |
| 1.3.6.1.4.1.29.1.5.2.1.1 | Rowdot3Entry | not-accessible | mandatory | |
| 1.3.6.1.4.1.29.1.5.2.1.1.1 | Columndot3Index | read-only | mandatory | This read-only variable is the port number of the LAN. |
| 1.3.6.1.4.1.29.1.5.2.1.1.2 | ColumnvDot3XcvrVersion | read-only | mandatory | This read-only variable specifies the type of transceiver interface (IEEE 802.3, Ethernet 1) to be used with the LAN port. |
| 1.3.6.1.4.1.29.1.5.2.1.1.3 | ColumnvDot3TxErrors | read-only | mandatory | This read-only variable shows the total number of transmit errors from Port O. The total includes all errors of the following types: buffer errors, underflow e… |
| 1.3.6.1.4.1.29.1.5.2.1.1.4 | ColumnvDot3RxErrors | read-only | mandatory | This read-only variable displays the total number of receive errors. The total includes all errors of the following types: overflow errors, missed packet error… |
| 1.3.6.1.4.1.29.1.5.2.1.1.5 | ColumnvDot3RxControllerResets | read-only | mandatory | This read-only variable displays the number of instances where the Ethernet controller has been reset due to memory parity errors, controller timeouts, or othe… |
| 1.3.6.1.4.1.29.1.5.2.2 | Tabledot3TxTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.29.1.5.2.2.1 | Rowdot3TxEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.29.1.5.2.2.1.1 | Columndot3TxIndex | read-only | mandatory | This read-only variable displays the TX LAN port number. |
| 1.3.6.1.4.1.29.1.5.2.2.1.2 | Columndot3TxSingleCollisionFrames | read-only | mandatory | This read-only variable displays the number of messages whose transmission was deferred once due to a collision with another station's transmission. A few of t… |
| 1.3.6.1.4.1.29.1.5.2.2.1.3 | Columndot3TxMultipleCollisionFrames | read-only | mandatory | This read-only variable displays the number of messages whose transmission was deferred more than once due to collisions with other stations' transmissions. A … |
| 1.3.6.1.4.1.29.1.5.2.2.1.4 | ColumnvDot3TxBufferErrors | read-only | mandatory | This read-only variable displays the number of messages transmitted incorrectly due to a lack of buffer availability. This is a Port 0 Error statistic. |
| 1.3.6.1.4.1.29.1.5.2.2.1.5 | ColumnvDot3TxUnderflowErrors | read-only | mandatory | This read-only variable displays the number of messages lost in transmission due to an inability to maintain data in the first-in, first-out (FIFO) queue. This… |
| 1.3.6.1.4.1.29.1.5.2.2.1.6 | ColumnvDot3TxPacketsTooLongErrors | read-only | mandatory | This read-only variable displays the number of packets presented for transmission which exceed the Ethernet's 1518-byte limit. Primarily relevant in bridging h… |
| 1.3.6.1.4.1.29.1.5.2.2.1.7 | ColumnvDot3XTxLateCollisions | read-only | mandatory | This read-only variable displays the number of messages lost in transmission due to a collision after the Ethernet slot time elapsed. This is normally the resu… |
| 1.3.6.1.4.1.29.1.5.2.2.1.8 | ColumnvDot3XTxExcessiveCollisions | read-only | mandatory | This read-only variable displays the number of messages lost in transmission because they had more than 15 transmission attempts aborted due to collisions. The… |
| 1.3.6.1.4.1.29.1.5.2.2.1.9 | ColumnvDot3XTxCarrierSenseErrors | read-only | mandatory | This read-only variable displays the number of messages lost as a result of losing the carrier during transmission. This is normally the result of a failing tr… |
| 1.3.6.1.4.1.29.1.5.2.3 | Tabledot3RxTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.29.1.5.2.3.1 | Rowdot3RxEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.29.1.5.2.3.1.1 | Columndot3RxIndex | read-only | mandatory | This read-only variable displays the RX LAN port number. |
| 1.3.6.1.4.1.29.1.5.2.3.1.2 | ColumnvDot3RxBufferErrors | read-only | mandatory | This read-only variable displays the number of messages received incorrectly due to a lack of buffer availability. This is a Port 0 Error statistic. |
| 1.3.6.1.4.1.29.1.5.2.3.1.3 | ColumnvDot3RxOverflowErrors | read-only | mandatory | This read-only variable displays the number of messages received incorrectly due to an internal FIFO queue overflow. This is a Port 0 Error statistic. |
| 1.3.6.1.4.1.29.1.5.2.3.1.4 | ColumnvDot3RxFCSErrors | read-only | mandatory | This read-only variable displays the number of messages received incorrectly because of an FCS (Frame Checksum) error. This is a Port 0 Error statistic. |
| 1.3.6.1.4.1.29.1.5.2.3.1.5 | ColumnvDot3RxFramingErrors | read-only | mandatory | This read-only variable displays the number of messages received incorrectly with an FCS (Frame Checksum) error and a non-integer number of octets. This is a P… |
| 1.3.6.1.4.1.29.1.5.2.3.1.6 | ColumnvDot3RxMissedPktsErrors | read-only | mandatory | This read-only variable displays the number of instances where the Ethernet controller could not receive one or more frames due to the lack of available buffer… |
| 1.3.6.1.4.1.29.1.5.3 | Nodetokenring | |||
| 1.3.6.1.4.1.29.2 | Nodevitaexperimental |