VIVOE-MIB
92 objects
The private MIB module definition for the management and control of devices in a digital video architecture compliant with the Vetronics Infrastructure for Video Over Ethernet (VIVOE) Defence Standard. The MIB is defined in Appendix A of Def Stan 00-82 Part 1 Issue 2.
Imported Objects
| SNMPv2-CONF | NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | enterprises Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | MacAddress TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.35990 | Nodedesle | |||
| 1.3.6.1.4.1.35990.3 | NodedesleProducts | |||
| 1.3.6.1.4.1.35990.3.1 | IdentityvivoeMIB | The private MIB module definition for the management and control of devices in a digital video architecture compliant with the Vetronics Infrastructure for Vid… | ||
| 1.3.6.1.4.1.35990.3.1.1 | NodedeviceInfo | |||
| 1.3.6.1.4.1.35990.3.1.1.1 | ScalardeviceDesc | read-only | current | A textual description of the main function of the device, i.e. whether it is a colour camera, a sensor interface or a display interface etc. |
| 1.3.6.1.4.1.35990.3.1.1.2 | ScalardeviceManufacturer | read-only | current | A textual name for the manufacturer of the device. |
| 1.3.6.1.4.1.35990.3.1.1.3 | ScalardevicePartNumber | read-only | current | The manufacturer's part number for the device. |
| 1.3.6.1.4.1.35990.3.1.1.4 | ScalardeviceSerialNumber | read-only | current | The serial number of the device. |
| 1.3.6.1.4.1.35990.3.1.1.5 | ScalardeviceHardwareVersion | read-only | current | The hardware version of the device, if applicable. |
| 1.3.6.1.4.1.35990.3.1.1.6 | ScalardeviceSoftwareVersion | read-only | current | The software version of the device, if applicable. |
| 1.3.6.1.4.1.35990.3.1.1.7 | ScalardeviceFirmwareVersion | read-only | current | The firmware version of the device, if applicable. |
| 1.3.6.1.4.1.35990.3.1.1.8 | ScalardeviceMibVersion | read-only | current | The MIB version implemented on the device. For this version of MIB the object shall be set to 'Issue 2' by the SNMP agent on the device. |
| 1.3.6.1.4.1.35990.3.1.1.9 | ScalardeviceType | read-only | current | The basic functionality of the device, whether it is a service provider (a transmitter, camera etc.) or a service user (receiver, display etc). If the device c… |
| 1.3.6.1.4.1.35990.3.1.1.10 | ScalardeviceUserDesc | read-write | current | A textual description assigned by the user or the system integrator to uniquely identify the device in a system, e.g. rear driving camera, image processor etc.… |
| 1.3.6.1.4.1.35990.3.1.1.11 | ScalarethernetIfNumber | read-only | current | The number of Ethernet network interfaces on the device that communicate with the VIVOE system. Up to 255 interfaces may be supported. |
| 1.3.6.1.4.1.35990.3.1.1.12 | TableethernetIfTable | not-accessible | current | A table of Ethernet network interfaces on the device that communicate with the VIVOE system. The number of entries is specified by ethernetIfNumber. |
| 1.3.6.1.4.1.35990.3.1.1.12.1 | RowethernetIfEntry | not-accessible | current | An entry in the table of Ethernet network interfaces on the device. A row in this table cannot be created or deleted by SNMP operations on columns in the table… |
| 1.3.6.1.4.1.35990.3.1.1.12.1.1 | ColumnethernetIfIndex | not-accessible | current | The index for each entry in the table of Ethernet network interfaces on the device. The index value range shall be from 1 to the number of entries is specified… |
| 1.3.6.1.4.1.35990.3.1.1.12.1.2 | ColumnethernetIfSpeed | read-only | current | The maximum speed of the Ethernet interface in Mbps (e.g. for a Gigabit Ethernet interface the value would be 1000). This figure shall not necessary reflect th… |
| 1.3.6.1.4.1.35990.3.1.1.12.1.3 | ColumnethernetIfMacAddress | read-only | current | The MAC address of the Ethernet interface represented as a string of 6 octets as defined in SNMPv2-TC (i.e. a MAC address of 01:02:03:F4:F5:F6 shall be stored … |
| 1.3.6.1.4.1.35990.3.1.1.12.1.4 | ColumnethernetIfIpAddress | read-write | current | This is the statically assigned IP address of the interface on the device. An SNMP manager may change the IP address (if the device is in the maintenance mode)… |
| 1.3.6.1.4.1.35990.3.1.1.12.1.5 | ColumnethernetIfSubnetMask | read-write | current | This is the subnet mask associated with the IP address of this interface. The value of the mask is an IP address with all the network bits set to 1 and all the… |
| 1.3.6.1.4.1.35990.3.1.1.12.1.6 | ColumnethernetIfIpAddressConflict | read-write | current | If the device detected conflicting IP addresses on power up or after reset it shall store the last conflicting address in this object. The object shall be sent… |
| 1.3.6.1.4.1.35990.3.1.1.13 | ScalardeviceNatoStockNumber | read-only | current | The NATO stock number (NSN) of the device. |
| 1.3.6.1.4.1.35990.3.1.1.14 | ScalardeviceMode | read-write | current | This object shall be used to set the mode of the device. 1 - In the normal mode the device shall boot into a 'stopped' state and . The device shall require the… |
| 1.3.6.1.4.1.35990.3.1.1.15 | ScalardeviceReset | read-write | current | This object can be used to initiate a reboot or reset on the device and thus enable a currently disabled video format. 1 - Normal denotes that the device is in… |
| 1.3.6.1.4.1.35990.3.1.2 | NodevideoFormatInfo | |||
| 1.3.6.1.4.1.35990.3.1.2.1 | ScalarvideoFormatNumber | read-only | current | The number of distinct video formats supported by the device. Up to 255 video formats may be supported. |
| 1.3.6.1.4.1.35990.3.1.2.2 | TablevideoFormatTable | not-accessible | current | A table of all the distinct video formats supported by the device. The number of entries is specified by videoFormatNumber. |
| 1.3.6.1.4.1.35990.3.1.2.2.1 | RowvideoFormatEntry | not-accessible | current | An entry in the table of distinct video formats supported by the device. A row in this table cannot be created or deleted by SNMP operations on columns of the … |
| 1.3.6.1.4.1.35990.3.1.2.2.1.1 | ColumnvideoFormatIndex | not-accessible | current | The index for each entry in the table of distinct video formats supported by the device. The index value range shall be from 1 to the number of entries is spec… |
| 1.3.6.1.4.1.35990.3.1.2.2.1.2 | ColumnvideoFormatType | read-only | current | The main function of the format. The types defined are: 1 - A service provider format supporting full frame video. 2 - A service provider format supporting a R… |
| 1.3.6.1.4.1.35990.3.1.2.2.1.3 | ColumnvideoFormatStatus | read-only | current | This object denotes whether the video format described in this entry in the table is currently enabled or disabled. The status types defined are: 1 - Enabled d… |
| 1.3.6.1.4.1.35990.3.1.2.2.1.4 | ColumnvideoFormatBase | read-only | current | The basic video format for this entry. For uncompressed video this shall be set to 'raw' and for compressed video, the compression scheme used will be designat… |
| 1.3.6.1.4.1.35990.3.1.2.2.1.5 | ColumnvideoFormatSampling | read-only | current | The video pixel sampling format for this entry. This shall be the same as the 'sampling' parameter from the SDP description (e.g. YCbCr-4:2:2, RGB, GRAYSCALE).… |
| 1.3.6.1.4.1.35990.3.1.2.2.1.6 | ColumnvideoFormatBitDepth | read-only | current | The number of bits used to encode a pixel or series of pixels for this entry. This shall be the same as the 'depth' parameter from the SDP mapping description.… |
| 1.3.6.1.4.1.35990.3.1.2.2.1.7 | ColumnvideoFormatFps | read-only | current | The maximum number of frames per second. If the format is interlaced the number of fields per second will be twice this figure. |
| 1.3.6.1.4.1.35990.3.1.2.2.1.8 | ColumnvideoFormatColorimetry | read-only | current | The colorimetry specification for this entry. This shall be the same as the 'colorimetry' parameter from the SDP description (e.g. BT601-5). If not required th… |
| 1.3.6.1.4.1.35990.3.1.2.2.1.9 | ColumnvideoFormatInterlaced | read-only | current | Denotes whether the video format is interlaced or progressive scan. If not required the value shall be 'none'. The scan types defined are: 1 - Interlaced. 2 - … |
| 1.3.6.1.4.1.35990.3.1.2.2.1.10 | ColumnvideoFormatCompressionFactor | read-write | current | If the format employs compression, this object specifies the factor on which the video compression rate is based. The compression factors defined are: 1 - Targ… |
| 1.3.6.1.4.1.35990.3.1.2.2.1.11 | ColumnvideoFormatCompressionRate | read-write | current | When the videoFormatCompressionFactor object is set to targetRate, this object shall specify the maximum target rate in Mbps. When the videoFormatCompressionFa… |
| 1.3.6.1.4.1.35990.3.1.2.2.1.12 | ColumnvideoFormatMaxHorzRes | read-only | current | The maximum horizontal resolution supported by this video format for a service provider or a ROI. |
| 1.3.6.1.4.1.35990.3.1.2.2.1.13 | ColumnvideoFormatMaxVertRes | read-only | current | The maximum vertical resolution supported by this video format for a service provider or a ROI. |
| 1.3.6.1.4.1.35990.3.1.2.2.1.14 | ColumnvideoFormatRoiHorzRes | read-write | current | If the format is a ROI this object shall specify the horizontal resolution of the ROI. If the format is not a ROI the value shall be 0. The relationship betwee… |
| 1.3.6.1.4.1.35990.3.1.2.2.1.15 | ColumnvideoFormatRoiVertRes | read-write | current | If the format is a ROI this object shall specify the vertical resolution of the ROI. If the format is not a ROI the value shall be 0. The relationship between … |
| 1.3.6.1.4.1.35990.3.1.2.2.1.16 | ColumnvideoFormatRoiOriginTop | read-write | current | If the format is a ROI this object shall specify the top origin of the ROI. If the format is not a ROI the value shall be 0. The relationship between this obje… |
| 1.3.6.1.4.1.35990.3.1.2.2.1.17 | ColumnvideoFormatRoiOriginLeft | read-write | current | If the format is a ROI this object shall specify the left origin of the ROI. If the format is not a ROI the value shall be 0. The relationship between this obj… |
| 1.3.6.1.4.1.35990.3.1.2.2.1.18 | ColumnvideoFormatRoiExtentBottom | read-write | current | If the format is a scalable ROI this object shall specify the bottom extent of the ROI. If the format is not a ROI or is a non-scalable ROI the value shall be … |
| 1.3.6.1.4.1.35990.3.1.2.2.1.19 | ColumnvideoFormatRoiExtentRight | read-write | current | If the format is a scalable ROI this object shall specify the default right extent of the ROI. If the format is not a ROI or is a non-scalable ROI the value sh… |
| 1.3.6.1.4.1.35990.3.1.2.2.1.20 | ColumnvideoFormatRtpPt | read-write | current | For a service provider this is the RTP Payload Type number in the RTP header for this format. Payload Types from 0 to 95 are statically assigned or reserved, w… |
| 1.3.6.1.4.1.35990.3.1.3 | NodechannelControl | |||
| 1.3.6.1.4.1.35990.3.1.3.1 | ScalarchannelReset | read-write | current | In the maintenance mode this object may be used to initiate a reboot or reset on a particular channel. This will set the channel to its default state. 0 - Norm… |
| 1.3.6.1.4.1.35990.3.1.3.2 | ScalarchannelNumber | read-only | current | The number of video channels supported by the device. For a service provider channels may be multiple video streams or ROIs. For service users it may be the nu… |
| 1.3.6.1.4.1.35990.3.1.3.3 | TablechannelTable | not-accessible | current | A table of channels supported by the device. The number of entries is specified by channelNumber. |
| 1.3.6.1.4.1.35990.3.1.3.3.1 | RowchannelEntry | not-accessible | current | An entry in the table of channels supported by the device. A row in this table cannot be created or deleted by SNMP operations on columns of the table. The obj… |
| 1.3.6.1.4.1.35990.3.1.3.3.1.1 | ColumnchannelIndex | not-accessible | current | The index for each entry in the table of channels supported by the device. The index value range shall be from 1 to the number of entries is specified by chann… |
| 1.3.6.1.4.1.35990.3.1.3.3.1.2 | ColumnchannelType | read-only | current | The main function of the channel. The types defined are: 1 - A service provider channel providing full frame video. 2 - A service provider channel providing a … |
| 1.3.6.1.4.1.35990.3.1.3.3.1.3 | ColumnchannelUserDesc | read-write | current | A textual description assigned by the user or the system integrator to uniquely identify the channel on the device in a system, e.g. front LSA camera etc. The … |
| 1.3.6.1.4.1.35990.3.1.3.3.1.4 | ColumnchannelStatus | read-write | current | The current status of the channel. Setting the value of this object shall also be used to start or stop the encoding or decoding on the channel. Other objects … |
| 1.3.6.1.4.1.35990.3.1.3.3.1.5 | ColumnchannelVideoFormatIndex | read-write | current | This object cross-references the videoFormatIndex object in the videoFormatTable and may be set to select the corresponding video format for the channel. The d… |
| 1.3.6.1.4.1.35990.3.1.3.3.1.6 | ColumnchannelVideoFormat | read-only | current | The video format currently being processed on the channel. For uncompressed video this shall be set to 'raw' and for compressed video, the compression scheme u… |
| 1.3.6.1.4.1.35990.3.1.3.3.1.7 | ColumnchannelVideoSampling | read-only | current | The video pixel sampling format currently being processed on the channel. This shall be the same as the 'sampling' parameter from the SDP mapping description (… |
| 1.3.6.1.4.1.35990.3.1.3.3.1.8 | ColumnchannelVideoBitDepth | read-only | current | The number of bits used to encode a pixel or series of pixels in the current video format on this channel. This shall be the same as the 'depth' parameter from… |
| 1.3.6.1.4.1.35990.3.1.3.3.1.9 | ColumnchannelFps | read-only | current | The maximum number of frames per second for the format on this channel. If the format is interlaced the number of fields per second will be twice this figure. |
| 1.3.6.1.4.1.35990.3.1.3.3.1.10 | ColumnchannelColorimetry | read-only | current | The colorimetry specification for the format on this channel. This shall be the same as the 'colorimetry' parameter from the SDP description (e.g. BT601-5). If… |
| 1.3.6.1.4.1.35990.3.1.3.3.1.11 | ColumnchannelInterlaced | read-only | current | Denotes whether the video format currently be processed by the channel is interlaced or progressive scan video. If the device is not processing video on the ch… |
| 1.3.6.1.4.1.35990.3.1.3.3.1.12 | ColumnchannelCompressionFactor | read-only | current | The factor on which the video compression rate is based, if applicable. The compression types defined are: 1 - Target Rate: The compression factor shall be set… |
| 1.3.6.1.4.1.35990.3.1.3.3.1.13 | ColumnchannelCompressionRate | read-write | current | When the channelCompressionFactor object is set to targetRate, this object shall specify the maximum target rate in Mbps. When the channelCompressionFactor obj… |
| 1.3.6.1.4.1.35990.3.1.3.3.1.14 | ColumnchannelHorzRes | read-write | current | The current horizontal resolution of the channel. If the channel is a ROI, this object can be set to request a new horizontal resolution for the ROI. The relat… |
| 1.3.6.1.4.1.35990.3.1.3.3.1.15 | ColumnchannelVertRes | read-write | current | The current vertical resolution of the channel. If the channel is a ROI, this object can be set to request a new vertical resolution for the ROI. The relations… |
| 1.3.6.1.4.1.35990.3.1.3.3.1.16 | ColumnchannelRoiOriginTop | read-write | current | If the channel is a ROI, this object shall specify the top origin of the ROI. The object can be set to move the ROI and the relationship between this object an… |
| 1.3.6.1.4.1.35990.3.1.3.3.1.17 | ColumnchannelRoiOriginLeft | read-write | current | If the channel is a ROI, this object shall specify the left origin of the ROI. The object can be set to move the ROI and the relationship between this object a… |
| 1.3.6.1.4.1.35990.3.1.3.3.1.18 | ColumnchannelRoiExtentBottom | read-write | current | If the channel is a scalable ROI, this object shall specify the bottom extent of the ROI. The object can be set to modify the ROI and the relationship between … |
| 1.3.6.1.4.1.35990.3.1.3.3.1.19 | ColumnchannelRoiExtentRight | read-write | current | If the channel is a scalable ROI, this object shall specify the right extent of the ROI. The object can be set to modify the ROI and the relationship between t… |
| 1.3.6.1.4.1.35990.3.1.3.3.1.20 | ColumnchannelRtpPt | read-only | current | For a service provider this is the RTP Payload Type ID in the RTP header associated with this channel. The Payload Type IDs from 0 to 95 are statically assigne… |
| 1.3.6.1.4.1.35990.3.1.3.3.1.21 | ColumnchannelReceiveIpAddress | read-write | current | For a service user channel this object is the multicast IP address to receive RTP encoded video or data on and can be changed to select a new RTP stream. A ser… |
| 1.3.6.1.4.1.35990.3.1.3.3.1.22 | ColumnchannelInterPacketDelay | read-write | current | This object may be used to set the delay in microseconds between RTP packets on this channel. The time is measured from the end of the previous packet to the b… |
| 1.3.6.1.4.1.35990.3.1.3.3.1.23 | ColumnchannelSapMessageInterval | read-write | current | The interval (in milliseconds) between transmitted SAP/SDP messages. The value of this object can be set (when in the maintenance mode) to request a new interv… |
| 1.3.6.1.4.1.35990.3.1.3.3.1.24 | ColumnchannelDefaultVideoFormatIndex | read-write | current | This object cross-references the videoFormatIndex object in the videoFormatTable and may be set (when in the maintenance mode) to define the default video form… |
| 1.3.6.1.4.1.35990.3.1.3.3.1.25 | ColumnchannelDefaultReceiveIpAddress | read-write | current | For a service user channel this object is the default multicast IP address that that a service user shall receive RTP encoded video or data on at start-up if t… |
| 1.3.6.1.4.1.35990.3.1.4 | NodevivoeNotifications | |||
| 1.3.6.1.4.1.35990.3.1.4.1 | NotificationdeviceError | current | This trap is sent when an unspecified error has been detected on the device. The message shall be sent using the broadcast IP address specified in Def Stan 00-… | |
| 1.3.6.1.4.1.35990.3.1.4.2 | NotificationipAddressConflict | current | This notification message is sent when an IP address conflict has been detected by the device. The notification includes the last IP address a conflict was det… | |
| 1.3.6.1.4.1.35990.3.1.5 | NodevivoeGroups | |||
| 1.3.6.1.4.1.35990.3.1.5.1 | GrouppresetGroup | current | The objects whose values shall be preset by the manufacturer of the device and cannot be subsequently changed via the MIB. | |
| 1.3.6.1.4.1.35990.3.1.5.2 | GroupsetChannelGroup | current | The list of objects that a service provider shall update when setting a channel to a particular video format. In the normal mode the format shall be selected b… | |
| 1.3.6.1.4.1.35990.3.1.5.3 | GroupmaintenanceModeGroup | current | The objects whose values shall only be settable when the device is in the maintenance mode (the deviceMode object is set to maintenanceMode. If the device is n… | |
| 1.3.6.1.4.1.35990.3.1.5.4 | GroupvolatileGroup | current | The objects whose values shall be stored in volatile memory and shall not maintained during a reset, reboot or power cycle. The values for all other objects sh… | |
| 1.3.6.1.4.1.35990.3.1.5.5 | GroupnotificationGroup | current | The group of objects specifying the notifications (Traps) that can be sent by the device. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| DisplayString16 | OCTET STRING (SIZE (0..16)) | current | This data type shall conform to the NVT ASCII character set, as defined in RFC 854, but shall be limited to only the displayable characters and shall exclude 0x00 (NUL), 0x0A (CR) and 0x0D (LF). It is based on the SNMPv… |
| DisplayString32 | OCTET STRING (SIZE (0..32)) | current | This data type shall conform to the NVT ASCII character set, as defined in RFC 854, but shall be limited to only the displayable characters and shall exclude 0x00 (NUL), 0x0A (CR) and 0x0D (LF). It is based on the SNMPv… |
| DisplayString64 | OCTET STRING (SIZE (0..64)) | current | This data type shall conform to the NVT ASCII character set, as defined in RFC 854, but shall be limited to only the displayable characters and shall exclude 0x00 (NUL), 0x0A (CR) and 0x0D (LF). It is based on the SNMPv… |