VOLIUS-OA-MIB
100 objects
This MIB describes all SNMP-enabled hardware produced by Volius, such as Fiber optical receivers, Erbium-doped fiber amplifiers, Optical switches, CATV optical transmitters.
Imported Objects
| INET-ADDRESS-MIB | InetAddressIPv4 |
| SNMPv2-SMI | enterprises Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks |
| SNMPv2-TC | DateAndTime DisplayString MacAddress TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.34652 | Nodevolius | |||
| 1.3.6.1.4.1.34652.1 | IdentityvlsGlobalModule | This MIB describes all SNMP-enabled hardware produced by Volius, such as Fiber optical receivers, Erbium-doped fiber amplifiers, Optical switches, CATV optical… | ||
| 1.3.6.1.4.1.34652.2 | NodevlsSystem | |||
| 1.3.6.1.4.1.34652.2.10 | NodevlsSystemGeneral | |||
| 1.3.6.1.4.1.34652.2.10.1 | ScalarvlsModelName | read-only | current | |
| 1.3.6.1.4.1.34652.2.10.2 | ScalarvlsSerialNumber | read-only | current | |
| 1.3.6.1.4.1.34652.2.10.3 | ScalarvlsFirmwareVersion | read-only | current | |
| 1.3.6.1.4.1.34652.2.10.4 | ScalarvlsDateAndTime | read-only | current | |
| 1.3.6.1.4.1.34652.2.10.5 | ScalarvlsTimeZone | read-write | current | Difference between local time and UTC in minutes. |
| 1.3.6.1.4.1.34652.2.10.6 | ScalarvlsCaseTemperature | read-only | current | |
| 1.3.6.1.4.1.34652.2.10.7 | TablevlsSupplyVoltageTable | not-accessible | current | |
| 1.3.6.1.4.1.34652.2.10.7.1 | RowvlsSupplyVoltageEntry | not-accessible | current | |
| 1.3.6.1.4.1.34652.2.10.7.1.1 | ColumnvlsSupplyVoltageIndex | read-only | current | |
| 1.3.6.1.4.1.34652.2.10.7.1.2 | ColumnvlsSupplyVoltageNominal | read-only | current | |
| 1.3.6.1.4.1.34652.2.10.7.1.3 | ColumnvlsSupplyVoltageActual | read-only | current | |
| 1.3.6.1.4.1.34652.2.10.8 | ScalarvlsOperationMinutes | read-only | obsolete | |
| 1.3.6.1.4.1.34652.2.10.9 | ScalarvlsActivePowerSupply | read-only | obsolete | |
| 1.3.6.1.4.1.34652.2.10.10 | ScalarvlsBootLoaderVersion | read-only | current | |
| 1.3.6.1.4.1.34652.2.10.11 | ScalarvlsFanSpeed | read-only | current | |
| 1.3.6.1.4.1.34652.2.11 | NodevlsNetworkServices | |||
| 1.3.6.1.4.1.34652.2.11.5 | NodevlsNetworkAddress | |||
| 1.3.6.1.4.1.34652.2.11.5.1 | ScalarvlsMacAddress | read-only | current | |
| 1.3.6.1.4.1.34652.2.11.5.2 | ScalarvlsIpAddress | read-only | current | |
| 1.3.6.1.4.1.34652.2.11.5.3 | ScalarvlsNetMask | read-only | current | |
| 1.3.6.1.4.1.34652.2.11.5.4 | ScalarvlsDefaultGateway | read-only | current | |
| 1.3.6.1.4.1.34652.2.11.6 | NodevlsHttp | |||
| 1.3.6.1.4.1.34652.2.11.6.1 | ScalarvlsHttpPassword | read-only | obsolete | |
| 1.3.6.1.4.1.34652.2.11.6.2 | ScalarvlsHttpPasswordEnabled | read-write | current | |
| 1.3.6.1.4.1.34652.2.11.6.3 | ScalarvlsHttpPort | read-only | current | |
| 1.3.6.1.4.1.34652.2.11.6.4 | ScalarvlsHttpEnabled | read-only | current | |
| 1.3.6.1.4.1.34652.2.11.7 | NodevlsSnmp | |||
| 1.3.6.1.4.1.34652.2.11.7.1 | ScalarvlsSnmpPort | read-only | current | |
| 1.3.6.1.4.1.34652.2.11.7.2 | TablevlsTrapDestTable | not-accessible | current | |
| 1.3.6.1.4.1.34652.2.11.7.2.1 | RowvlsTrapDestEntry | not-accessible | current | |
| 1.3.6.1.4.1.34652.2.11.7.2.1.1 | ColumnvlsTrapDestIndex | read-only | current | |
| 1.3.6.1.4.1.34652.2.11.7.2.1.2 | ColumnvlsTrapDestAddr | read-write | current | |
| 1.3.6.1.4.1.34652.2.11.7.2.1.3 | ColumnvlsTrapDestPort | read-write | current | |
| 1.3.6.1.4.1.34652.2.11.7.2.1.4 | ColumnvlsTrapDestEnable | read-write | current | |
| 1.3.6.1.4.1.34652.2.11.8 | NodevlsSntp | |||
| 1.3.6.1.4.1.34652.2.11.8.1 | ScalarvlsSntpServerAddr | read-only | current | |
| 1.3.6.1.4.1.34652.2.11.8.2 | ScalarvlsSntpServerPort | read-only | current | |
| 1.3.6.1.4.1.34652.2.11.8.3 | ScalarvlsSntpEnabled | read-write | current | |
| 1.3.6.1.4.1.34652.2.13 | NodevlsEventLog | |||
| 1.3.6.1.4.1.34652.2.13.1 | ScalarvlsLastEventCode | read-only | current | |
| 1.3.6.1.4.1.34652.2.13.2 | ScalarvlsLastEventIndex | read-only | current | |
| 1.3.6.1.4.1.34652.2.13.3 | ScalarvlsEventLogSize | read-only | current | Number of events stored in the log. |
| 1.3.6.1.4.1.34652.2.13.4 | TablevlsEventLogTable | not-accessible | current | |
| 1.3.6.1.4.1.34652.2.13.4.1 | RowvlsEventLogEntry | not-accessible | current | |
| 1.3.6.1.4.1.34652.2.13.4.1.1 | ColumnvlsEventIndex | read-only | current | |
| 1.3.6.1.4.1.34652.2.13.4.1.2 | ColumnvlsEventCode | read-only | current | |
| 1.3.6.1.4.1.34652.2.13.4.1.3 | ColumnvlsEventTimeStamp | read-only | current | |
| 1.3.6.1.4.1.34652.2.13.4.1.4 | ColumnvlsEventDateTime | read-only | current | |
| 1.3.6.1.4.1.34652.2.13.4.1.5 | ColumnvlsEventMessage | read-only | current | |
| 1.3.6.1.4.1.34652.2.13.8 | NotificationvlsEventTrap | current | ||
| 1.3.6.1.4.1.34652.2.14 | NodevlsAlarms | |||
| 1.3.6.1.4.1.34652.2.14.1 | ScalarvlsAlarmsActiveMask | read-only | current | This is a bit mask where all active alarms are combined. Alarms are latching, that is an alarm is still active even when the condition activating the alarm no … |
| 1.3.6.1.4.1.34652.2.14.2 | ScalarvlsAlarmsResetMask | read-write | current | You can write reset mask to reset individual alarms. An alarm will be reset only if the activating condition no longer exists. |
| 1.3.6.1.4.1.34652.2.14.3 | TablevlsAlarmsTable | not-accessible | current | |
| 1.3.6.1.4.1.34652.2.14.3.1 | RowvlsAlarmsEntry | not-accessible | current | |
| 1.3.6.1.4.1.34652.2.14.3.1.1 | ColumnvlsAlarmIndex | read-only | current | |
| 1.3.6.1.4.1.34652.2.14.3.1.2 | ColumnvlsAlarmState | read-write | current | When read, this OID indicates if the alarm is active. When vlsOff is written to this OID, the alarm is reset. |
| 1.3.6.1.4.1.34652.2.14.3.1.3 | ColumnvlsAlarmMessage | read-only | current | |
| 1.3.6.1.4.1.34652.3 | NodevlsEdfa | |||
| 1.3.6.1.4.1.34652.3.1 | ScalarvlsKeyState | read-only | current | |
| 1.3.6.1.4.1.34652.3.2 | ScalarvlsEdfaEmissionState | read-write | current | |
| 1.3.6.1.4.1.34652.3.3 | ScalarvlsEdfaMode | read-write | current | |
| 1.3.6.1.4.1.34652.3.4 | ScalarvlsEdfaPowerSetting | read-write | current | |
| 1.3.6.1.4.1.34652.3.5 | ScalarvlsEdfaPumpCurrentSetting | read-write | current | |
| 1.3.6.1.4.1.34652.3.6 | ScalarvlsEdfaGainSetting | read-write | obsolete | |
| 1.3.6.1.4.1.34652.3.7 | TablevlsEdfaInputTable | not-accessible | current | |
| 1.3.6.1.4.1.34652.3.7.1 | RowvlsEdfaInputEntry | not-accessible | current | |
| 1.3.6.1.4.1.34652.3.7.1.1 | ColumnvlsEdfaInputIndex | read-only | current | |
| 1.3.6.1.4.1.34652.3.7.1.2 | ColumnvlsEdfaInputPower | read-only | current | |
| 1.3.6.1.4.1.34652.3.8 | ScalarvlsEdfaOutputPowerTotal | read-only | current | |
| 1.3.6.1.4.1.34652.3.9 | ScalarvlsEdfaOutputPowerPerChannel | read-only | current | |
| 1.3.6.1.4.1.34652.3.10 | ScalarvlsEdfaSplitRatio | read-write | current | |
| 1.3.6.1.4.1.34652.3.11 | ScalarvlsEdfaPumpCurrent | read-only | current | |
| 1.3.6.1.4.1.34652.3.12 | ScalarvlsEdfaGain | read-only | current | |
| 1.3.6.1.4.1.34652.3.13 | ScalarvlsEdfaBackReflection | read-only | current | |
| 1.3.6.1.4.1.34652.3.14 | ScalarvlsEdfaBackReflectionThreshold | read-write | obsolete | |
| 1.3.6.1.4.1.34652.3.15 | ScalarvlsEdfaSwitchMode | read-write | current | |
| 1.3.6.1.4.1.34652.3.16 | ScalarvlsEdfaSwitchState | read-only | current | |
| 1.3.6.1.4.1.34652.3.17 | ScalarvlsEdfaPumpTemperature | read-only | current | |
| 1.3.6.1.4.1.34652.3.18 | ScalarvlsEdfaLosThreshold | read-write | current | |
| 1.3.6.1.4.1.34652.3.19 | ScalarvlsEdfaLoqThreshold | read-write | current | |
| 1.3.6.1.4.1.34652.4 | NodevlsOpticalSwitch | |||
| 1.3.6.1.4.1.34652.5 | NodevlsCatvTransmitter | |||
| 1.3.6.1.4.1.34652.6 | NodevlsOpticalReceiver | |||
| 1.3.6.1.4.1.34652.7 | NodevlsCabinetMonitor | |||
| 1.3.6.1.4.1.34652.8 | NodevlsUpsMonitor |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| VlsDeciCelsius | Integer32 | current | Data type representing temperature readings in units of 0.1 degrees Celsius. For example, a temperature of -12.3 degrees Celsius will be represented as -123. |
| VlsDeciDb | Integer32 | current | Data type a ratio (or gain) in units of 0.1 dB. For example, a gain of 12.5 dB will be represented as 125. |
| VlsDeciDbm | Integer32 | current | Data type representing power readings in units of 0.1 dBm. For example, a power of -2.5 dBm will be represented as -25. |
| VlsEdfaMode | INTEGER { vlsEdfaModeApc (1), vlsEdfaModeAcc (2) } | current | |
| VlsEvent | INTEGER { vlsEventStartUp (1), vlsEventPowerOff (2), vlsEventSntpSync (3), vlsEventFwUpload (4), vlsEventEmissionOn (5), vlsEventEmissionOff (6), vlsEventLaserTempNorm (7), vlsEventLaserTempLow (8), vlsEventLaserTempHigh (9), vlsEventLaserCurrentNorm (10), vlsEventLaserCurrentHigh (11), vlsEventInputLossOfSignal (12), vlsEventInputPowerLow (13), vlsEventInputPowerNorm (14), vlsEventInputPowerHigh (15), vlsEventOutputPowerNorm (16), vlsEventOutputPowerLow (17), vlsEventOutputPowerHigh (18), vlsEventCaseTempNorm (19), vlsEventCaseTempLow (20), vlsEventCaseTempHigh (21), vlsEventFanSpeedNorm (22), vlsEventFanSpeedLow (23), vlsEventCurrentProtectionSM (24), vlsEventCurrentProtectionMM (25), vlsEventSelectedInputA (26), vlsEventSelectedInputB (27) } | current | |
| VlsMillivolt | Integer32 | current | Data type representing voltage values in units of mV. |
| VlsPerMille | Integer32 | current | Data type representing fractions, where percentage would normally be used. 1 per mille corresponds to 0.1%. For example. 99.9% would be 999 per mille. |
| VlsRPM | Integer32 | current | Rotational speed in units of revolutions per minute. |
| VlsSwitchMode | INTEGER { vlsSwitchForceA (1), vlsSwitchForceB (2), vlsSwitchPreferA (3), vlsSwitchPreferB (4), vlsSwitchPreferALatch (5), vlsSwitchPreferBLatch (6) } | current | |
| VlsSwitchState | INTEGER { vlsSwitchStateA (1), vlsSwitchStateB (2) } | current |