VOLIUS-OT-MIB
98 objects
This MIB describes all SNMP-enabled hardware produced by Volius, such as Fiber optical receivers, Erbium-doped fiber amplifiers, Optical switches, CATV optical transmitters.
Imported Objects
| INET-ADDRESS-MIB | InetAddressIPv4 |
| SNMPv2-SMI | enterprises Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks |
| SNMPv2-TC | DateAndTime DisplayString MacAddress TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.34652 | Nodevolius | |||
| 1.3.6.1.4.1.34652.1 | IdentityvlsGlobalModule | This MIB describes all SNMP-enabled hardware produced by Volius, such as Fiber optical receivers, Erbium-doped fiber amplifiers, Optical switches, CATV optical… | ||
| 1.3.6.1.4.1.34652.2 | NodevlsSystem | |||
| 1.3.6.1.4.1.34652.2.10 | NodevlsSystemGeneral | |||
| 1.3.6.1.4.1.34652.2.10.1 | ScalarvlsModelName | read-only | current | |
| 1.3.6.1.4.1.34652.2.10.2 | ScalarvlsSerialNumber | read-only | current | |
| 1.3.6.1.4.1.34652.2.10.3 | ScalarvlsFirmwareVersion | read-only | current | |
| 1.3.6.1.4.1.34652.2.10.4 | ScalarvlsBootLoaderVersion | read-only | current | |
| 1.3.6.1.4.1.34652.2.10.5 | ScalarvlsDateAndTime | read-only | current | |
| 1.3.6.1.4.1.34652.2.10.6 | ScalarvlsTimeZone | read-write | current | Difference between local and UTC in minutes. |
| 1.3.6.1.4.1.34652.2.10.7 | ScalarvlsCaseTemperature | read-only | current | |
| 1.3.6.1.4.1.34652.2.10.8 | ScalarvlsFanSpeed | read-only | current | |
| 1.3.6.1.4.1.34652.2.10.9 | TablevlsSupplyVoltageTable | not-accessible | current | |
| 1.3.6.1.4.1.34652.2.10.9.1 | RowvlsSupplyVoltageEntry | not-accessible | current | |
| 1.3.6.1.4.1.34652.2.10.9.1.1 | ColumnvlsSupplyVoltageIndex | read-only | current | |
| 1.3.6.1.4.1.34652.2.10.9.1.2 | ColumnvlsSupplyVoltageNominal | read-only | current | |
| 1.3.6.1.4.1.34652.2.10.9.1.3 | ColumnvlsSupplyVoltageActual | read-only | current | |
| 1.3.6.1.4.1.34652.2.11 | NodevlsNetworkServices | |||
| 1.3.6.1.4.1.34652.2.11.5 | NodevlsNetworkAddress | |||
| 1.3.6.1.4.1.34652.2.11.5.1 | ScalarvlsMacAddress | read-write | current | |
| 1.3.6.1.4.1.34652.2.11.5.2 | ScalarvlsIpAddress | read-write | current | |
| 1.3.6.1.4.1.34652.2.11.5.3 | ScalarvlsNetMask | read-write | current | |
| 1.3.6.1.4.1.34652.2.11.5.4 | ScalarvlsDefaultGateway | read-write | current | |
| 1.3.6.1.4.1.34652.2.11.6 | NodevlsHttp | |||
| 1.3.6.1.4.1.34652.2.11.6.1 | ScalarvlsHttpPort | read-write | current | |
| 1.3.6.1.4.1.34652.2.11.6.2 | ScalarvlsHttpEnabled | read-write | current | |
| 1.3.6.1.4.1.34652.2.11.6.3 | ScalarvlsHttpPasswordEnabled | read-write | current | |
| 1.3.6.1.4.1.34652.2.11.7 | NodevlsSnmp | |||
| 1.3.6.1.4.1.34652.2.11.7.1 | ScalarvlsSnmpPort | read-write | current | |
| 1.3.6.1.4.1.34652.2.11.7.2 | TablevlsTrapDestTable | not-accessible | current | |
| 1.3.6.1.4.1.34652.2.11.7.2.1 | RowvlsTrapDestEntry | not-accessible | current | |
| 1.3.6.1.4.1.34652.2.11.7.2.1.1 | ColumnvlsTrapDestIndex | read-only | current | |
| 1.3.6.1.4.1.34652.2.11.7.2.1.2 | ColumnvlsTrapDestAddr | read-write | current | |
| 1.3.6.1.4.1.34652.2.11.7.2.1.3 | ColumnvlsTrapDestPort | read-write | current | |
| 1.3.6.1.4.1.34652.2.11.7.2.1.4 | ColumnvlsTrapDestEnable | read-write | current | |
| 1.3.6.1.4.1.34652.2.11.8 | NodevlsSntp | |||
| 1.3.6.1.4.1.34652.2.11.8.1 | ScalarvlsSntpServerAddr | read-write | current | |
| 1.3.6.1.4.1.34652.2.11.8.2 | ScalarvlsSntpServerPort | read-write | current | |
| 1.3.6.1.4.1.34652.2.11.8.3 | ScalarvlsSntpEnabled | read-write | current | |
| 1.3.6.1.4.1.34652.2.13 | NodevlsEventLog | |||
| 1.3.6.1.4.1.34652.2.13.1 | ScalarvlsLastEventCode | read-only | current | |
| 1.3.6.1.4.1.34652.2.13.2 | ScalarvlsLastEventIndex | read-only | current | |
| 1.3.6.1.4.1.34652.2.13.3 | ScalarvlsEventLogSize | read-only | current | Number of events stored in the log. |
| 1.3.6.1.4.1.34652.2.13.4 | TablevlsEventLogTable | not-accessible | current | |
| 1.3.6.1.4.1.34652.2.13.4.1 | RowvlsEventLogEntry | not-accessible | current | |
| 1.3.6.1.4.1.34652.2.13.4.1.1 | ColumnvlsEventIndex | read-only | current | |
| 1.3.6.1.4.1.34652.2.13.4.1.2 | ColumnvlsEventCode | read-only | current | |
| 1.3.6.1.4.1.34652.2.13.4.1.3 | ColumnvlsEventTimeStamp | read-only | current | |
| 1.3.6.1.4.1.34652.2.13.4.1.4 | ColumnvlsEventDateTime | read-only | current | |
| 1.3.6.1.4.1.34652.2.13.4.1.5 | ColumnvlsEventMessage | read-only | current | |
| 1.3.6.1.4.1.34652.2.13.8 | NotificationvlsEventTrap | current | ||
| 1.3.6.1.4.1.34652.2.14 | NodevlsAlarms | |||
| 1.3.6.1.4.1.34652.2.14.1 | ScalarvlsAlarmsActiveMask | read-only | current | This is a bit mask where all active alarms are combined. Alarms are latching, that is an alarm is still active even when the condition activating the alarm no … |
| 1.3.6.1.4.1.34652.2.14.2 | ScalarvlsAlarmsResetMask | read-write | current | You can write reset mask to reset individual alarms. An alarm will be reset only if the activating condition no longer exists. |
| 1.3.6.1.4.1.34652.2.14.3 | TablevlsAlarmsTable | not-accessible | current | |
| 1.3.6.1.4.1.34652.2.14.3.1 | RowvlsAlarmsEntry | not-accessible | current | |
| 1.3.6.1.4.1.34652.2.14.3.1.1 | ColumnvlsAlarmIndex | read-only | current | |
| 1.3.6.1.4.1.34652.2.14.3.1.2 | ColumnvlsAlarmState | read-write | current | When read, this OID indicates if the alarm is active. When vlsOff is written to this OID, the alarm is reset. |
| 1.3.6.1.4.1.34652.2.14.3.1.3 | ColumnvlsAlarmMessage | read-only | current | |
| 1.3.6.1.4.1.34652.3 | NodevlsEdfa | |||
| 1.3.6.1.4.1.34652.4 | NodevlsOpticalSwitch | |||
| 1.3.6.1.4.1.34652.5 | NodevlsCatvTransmitter | |||
| 1.3.6.1.4.1.34652.5.1 | ScalarvlsTxEmissionState | read-only | current | Reports whether the laser is on or off. |
| 1.3.6.1.4.1.34652.5.2 | TablevlsTxOutputTable | not-accessible | current | |
| 1.3.6.1.4.1.34652.5.2.1 | RowvlsTxOutputEntry | not-accessible | current | |
| 1.3.6.1.4.1.34652.5.2.1.1 | ColumnvlsTxOutputIndex | read-only | current | Optical output number (1 or 2). |
| 1.3.6.1.4.1.34652.5.2.1.2 | ColumnvlsTxOutputPower | read-only | current | Optical output level. |
| 1.3.6.1.4.1.34652.5.3 | ScalarvlsTxPoutLowAlarm | read-write | current | Output power low alarm threshold. |
| 1.3.6.1.4.1.34652.5.4 | ScalarvlsTxPoutHighAlarm | read-write | current | Output power high alarm threshold. |
| 1.3.6.1.4.1.34652.5.5 | ScalarvlsTxInputComposite | read-only | current | Composite RF level at the transmitter input. |
| 1.3.6.1.4.1.34652.5.6 | ScalarvlsTxInputPerChannel | read-only | current | Per-channel RF level at the transmitter input. |
| 1.3.6.1.4.1.34652.5.7 | ScalarvlsTxChannelPwrFactor | read-write | current | This factor is used to convert composite RF level to per-channel RF level. The factor is expressed in units of 0.1 dB and is always negative or zero. For examp… |
| 1.3.6.1.4.1.34652.5.8 | ScalarvlsTxOmi | read-only | current | Composite OMI in units of 0.1%. |
| 1.3.6.1.4.1.34652.5.9 | ScalarvlsTxAtt | read-only | current | Actual variable attenuator state. The range is 0..25 dB. |
| 1.3.6.1.4.1.34652.5.10 | ScalarvlsTxLaserCurrent | read-only | current | Laser current. 100% corresponds to the current set during factory calibration. The current is expected to rise slowly after years of operation (laser aging). |
| 1.3.6.1.4.1.34652.5.11 | ScalarvlsTxLaserTecCurrent | read-only | current | |
| 1.3.6.1.4.1.34652.5.12 | ScalarvlsTxLaserPower | read-only | current | |
| 1.3.6.1.4.1.34652.5.13 | ScalarvlsTxLaserTemperature | read-only | current | |
| 1.3.6.1.4.1.34652.5.14 | ScalarvlsTxAgc | read-write | current | AGC mode on/off control. |
| 1.3.6.1.4.1.34652.5.15 | ScalarvlsTxSetOmi | read-write | current | OMI setpoint when AGC is on. |
| 1.3.6.1.4.1.34652.5.16 | ScalarvlsTxSetAtt | read-write | current | Variable attenuator setpoint when AGC is off. |
| 1.3.6.1.4.1.34652.5.17 | ScalarvlsTxSetSbsThreshold | read-write | current | SBS suppression level. |
| 1.3.6.1.4.1.34652.6 | NodevlsOpticalReceiver | |||
| 1.3.6.1.4.1.34652.7 | NodevlsCabinetMonitor | |||
| 1.3.6.1.4.1.34652.8 | NodevlsUpsMonitor |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| VlsDbm | Integer32 | current | Data type representing RF power readings in units of dBm. |
| VlsDbuv | Integer32 | current | Data type representing RF power readings in units of dBuV. |
| VlsDeciCelsius | Integer32 | current | Data type representing temperature readings in units of 0.1 degrees Celsius. For example, a temperature of -12.3 degrees Celsius will be represented as -123. |
| VlsDeciDb | Integer32 | current | Data type representing RF gain in units of 0.1 dB. For example, a gain of -2.5 dB will be represented as -25. |
| VlsDeciDbm | Integer32 | current | Data type representing power readings in units of 0.1 dBm. For example, a power of -2.5 dBm will be represented as -25. |
| VlsDeciDbo | Integer32 | current | Data type representing OMI readings in units of 0.1 dBo. For example, an OMI of 10% will be represented as -100 (meaning -10.0 dBo), an OMI of 1% will be represented as -200 (meaning -20.0 dBo). |
| VlsEvent | INTEGER { vlsEventStartUp (1), vlsEventLaserOn (20), vlsEventLaserOff (21), vlsEventPout1Norm (22), vlsEventPout1High (23), vlsEventPout1Low (24), vlsEventPout2Norm (25), vlsEventPout2High (26), vlsEventPout2Low (27), vlsEventTcaseNorm (28), vlsEventTcaseLow (29), vlsEventTcaseHigh (30), vlsEventRFinNorm (31), vlsEventRFinLow (32), vlsEventRFinHigh (33), vlsEventLaserTempNorm (34), vlsEventLaserTempLow (35), vlsEventLaserTempHigh (36), vlsEventTecCurrentNorm (37), vlsEventTecCurrentLow (38), vlsEventTecCurrentHigh (39), vlsEventLaserCurrentNorm (40), vlsEventLaserCurrentLow (41), vlsEventLaserCurrentHigh (42), vlsEventLaserPowerNorm (43), vlsEventLaserPowerLow (44), vlsEventLaserPowerHigh (45), vlsEventOmiNorm (46), vlsEventOmiLow (47), vlsEventOmiHigh (48), vlsEventFanNorm (49), vlsEventFanLow (50) } | current | |
| VlsMilliAmp | Integer32 | current | Data type representing electrical current values in units of mA. |
| VlsMillivolt | Integer32 | current | Data type representing voltage values in units of mV. |
| VlsOnOff | INTEGER { vlsOn (1), vlsOff (2) } | current | Data type representing an on-off state. |
| VlsPercent | Integer32 | current | Data type representing fractions in units of 1%. |
| VlsPerMille | Integer32 | current | Data type representing fractions, where percentage would normally be used. 1 per mille corresponds to 0.1%. For example. 99.9% would be 999 per mille. |
| VlsRPM | Integer32 | current | Rotational speed in units of revolutions per minute. |