VTGW-MIB

274 objects

No module-level DESCRIPTION found.

Imported Objects

RFC-1212	OBJECT-TYPE
RFC-1215	TRAP-TYPE
RFC1155-SMI	Counter enterprises Gauge TimeTicks
RFC1213-MIB	DisplayString

OID	Name	Access	Status	Description
1.3.6.1.4.1.2516	Nodevocaltec
1.3.6.1.4.1.2516.2	Nodevtg
1.3.6.1.4.1.2516.2.1	NodesetParameterFailure			Setting parameter failed.
1.3.6.1.4.1.2516.2.1	Nodetgw
1.3.6.1.4.1.2516.2.1.1	ScalarsoftwareVersion	read-only	mandatory	The VTGW software version number.
1.3.6.1.4.1.2516.2.1.2	Scalarcti2Service	read-only	mandatory	CTI2 service name.
1.3.6.1.4.1.2516.2.1.3	ScalarresloveMode	read-write	mandatory	Resolving mode of the destination gateway IP address: can be done by a gatekeeper or localy at the VTGW by dialing plan.
1.3.6.1.4.1.2516.2.1.4	ScalartelephonyProtocol	read-write	mandatory	The telephony protocol used by VTGW.
1.3.6.1.4.1.2516.2.1.5	ScalarinternetProtocol	read-write	mandatory	The Internet protocol used by VTGW.
1.3.6.1.4.1.2516.2.1.6	ScalaruniversalLinesNumber	read-only	mandatory	The maximum number of universal (vioce and fax capability) lines,that can be licensed on this VTGW.
1.3.6.1.4.1.2516.2.1.7	ScalarvoiceLinesNumber	read-only	mandatory	The maximum number of voice lines,that can be licensed on this VTGW.
1.3.6.1.4.1.2516.2.1.8	ScalarfaxLinesNumber	read-only	mandatory	The maximum number of fax lines,that can be licensed on this VTGW.
1.3.6.1.4.1.2516.2.1.9	ScalarsncLinesNumber	read-only	mandatory	The maximum number of Surf & Call lines,that can be licensed on this VTGW.
1.3.6.1.4.1.2516.2.1.10	ScalariPhoneLinesNumber	read-only	mandatory	The maximum number of iPhone lines,that can be licensed on this VTGW.
1.3.6.1.4.1.2516.2.1.11	ScalardialerLinesNumber	read-only	mandatory	The maximum number of Dialer lines,that can be licensed on this VTGW.
1.3.6.1.4.1.2516.2.1.14	Scalarcti2ServicePollingQuantum	read-write	mandatory	CTI2 service polling quantum (sec).
1.3.6.1.4.1.2516.2.2	NodehaspExistance			HASP existance failed.
1.3.6.1.4.1.2516.2.2	Nodevnmvgk
1.3.6.1.4.1.2516.2.2.1	ScalarrcamPort	read-only	mandatory	VNM (RCAM) port.
1.3.6.1.4.1.2516.2.2.2	Scalarid	read-only	mandatory	VGK ID.
1.3.6.1.4.1.2516.2.2.3	Scalaralias	read-only	mandatory	VGK Alias.
1.3.6.1.4.1.2516.2.2.5	Scalartime2Live	read-write	mandatory	Time in seconds to live acknowledge to VGK.
1.3.6.1.4.1.2516.2.2.6	ScalarloginSetAttempts	read-write	mandatory	Login attempts to VGK within a set.
1.3.6.1.4.1.2516.2.2.7	ScalartimeB4LoginAttempt	read-write	mandatory	Time in seconds before the next login attempt to VGK within a set.
1.3.6.1.4.1.2516.2.2.8	ScalartimeB4LoginSet	read-write	mandatory	Time in seconds before the next login set to VGK.
1.3.6.1.4.1.2516.2.2.30	ScalarrasPort	read-only	mandatory	The port for connecting the VGK.
1.3.6.1.4.1.2516.2.3	Nodecti2ServiceFailure			CTI2 service failed.
1.3.6.1.4.1.2516.2.3	Nodehasp
1.3.6.1.4.1.2516.2.4	Nodeaudio
1.3.6.1.4.1.2516.2.4	NodevgkLoginFailure			VTG has failed to login to VGK.
1.3.6.1.4.1.2516.2.4.1	ScalarcodecsPriorities	read-write	mandatory	Prioritized list of active codecs ex: 7 1 2 5 8 20
1.3.6.1.4.1.2516.2.4.2	ScalarpreferredCodec	read-write	mandatory	Preferred codec.
1.3.6.1.4.1.2516.2.4.3	ScalaroutputGain	read-write	mandatory	Output volume gain.
1.3.6.1.4.1.2516.2.4.4	ScalarinputGain	read-write	mandatory	Input volume gain.
1.3.6.1.4.1.2516.2.4.5	TablecodecsTable	not-accessible	mandatory	codecs array of structures.
1.3.6.1.4.1.2516.2.4.5.1	RowcodecEntry	not-accessible	mandatory	Codec entry.
1.3.6.1.4.1.2516.2.4.5.1.1	Columncoder	read-only	mandatory	Coder number.
1.3.6.1.4.1.2516.2.4.5.1.2	ColumnvadEnable	read-write	mandatory	VAD enable.
1.3.6.1.4.1.2516.2.4.5.1.3	ColumncoderRate	read-write	mandatory	Coder Rate.
1.3.6.1.4.1.2516.2.4.5.1.4	ColumnframesPerPkt	read-write	mandatory	Frames Per Pkt.
1.3.6.1.4.1.2516.2.4.5.1.5	ColumnframesSize	read-write	mandatory	Frames Size.
1.3.6.1.4.1.2516.2.4.5.1.6	Columnjitter	read-write	mandatory	Jitter Min. Delay.
1.3.6.1.4.1.2516.2.4.5.1.7	ColumnjitterOptFactor	read-write	mandatory	Jitter Opt Factor.
1.3.6.1.4.1.2516.2.4.5.1.8	ColumncoderRedundency	read-write	mandatory	CoderRedundency.
1.3.6.1.4.1.2516.2.5	Nodeports
1.3.6.1.4.1.2516.2.5	NodevgkLogoutFailure			VTG has failed to logout from VGK.
1.3.6.1.4.1.2516.2.5.1	TableportsTable	not-accessible	mandatory	Ports array of structures.
1.3.6.1.4.1.2516.2.5.1.1	RowportEntry	not-accessible	mandatory	Port entry.
1.3.6.1.4.1.2516.2.5.1.1.1	ColumnportNumber	read-write	mandatory	Port number.
1.3.6.1.4.1.2516.2.5.1.1.2	ColumnportEnable	read-write	mandatory	Port enable.
1.3.6.1.4.1.2516.2.5.1.1.3	ColumnconnectedTo	read-write	mandatory	Connected to.
1.3.6.1.4.1.2516.2.5.1.1.4	ColumnboundDirection	read-write	mandatory	Bound direction.
1.3.6.1.4.1.2516.2.5.1.1.5	ColumndialingMode	read-write	mandatory	Dialing mode.
1.3.6.1.4.1.2516.2.5.1.1.6	ColumndetectionMode	read-write	mandatory	Detection mode.
1.3.6.1.4.1.2516.2.5.1.1.7	ColumnivrMode	read-write	mandatory	IVR mode.
1.3.6.1.4.1.2516.2.5.1.1.8	ColumnrepeatIVR	read-write	mandatory	Repeat IVR.
1.3.6.1.4.1.2516.2.5.1.1.9	ColumnoverSilenceTime	read-write	mandatory	OverSilence time.
1.3.6.1.4.1.2516.2.5.1.1.10	Columncomment	read-write	mandatory	Comment.
1.3.6.1.4.1.2516.2.6	Nodeivr
1.3.6.1.4.1.2516.2.6	NodevgkDisconnection			VTG disconnected from VGK.
1.3.6.1.4.1.2516.2.6.1	ScalarinterDigitTimeout	read-write	mandatory	Inter digit timeout.
1.3.6.1.4.1.2516.2.6.2	ScalardigitsTimeout	read-write	mandatory	Timeout for all digits.
1.3.6.1.4.1.2516.2.7	NodetelephonyError			Telephony error.
1.3.6.1.4.1.2516.2.7	NodetelephonyProtocols
1.3.6.1.4.1.2516.2.7.1	Nodeanalog
1.3.6.1.4.1.2516.2.7.1.21	ScalarringCount	read-write	mandatory	Number of rings before returning the ring event.
1.3.6.1.4.1.2516.2.7.1.22	Scalarvolume	read-write	mandatory	Engine volume control.
1.3.6.1.4.1.2516.2.7.2	Nodeenm
1.3.6.1.4.1.2516.2.7.2.1	Scalaridle	read-write	mandatory
1.3.6.1.4.1.2516.2.7.2.2	ScalaroutOfService	read-write	mandatory	Out Of Service bits, default=1101
1.3.6.1.4.1.2516.2.7.2.3	ScalarseizeOutbound	read-write	mandatory
1.3.6.1.4.1.2516.2.7.2.4	ScalarseizeInbound	read-write	mandatory
1.3.6.1.4.1.2516.2.7.2.5	ScalarseizeAckOutbound	read-write	mandatory
1.3.6.1.4.1.2516.2.7.2.6	ScalarseizeAckInbound	read-write	mandatory
1.3.6.1.4.1.2516.2.7.2.7	ScalaranswerOutbound	read-write	mandatory
1.3.6.1.4.1.2516.2.7.2.8	ScalaranswerInbound	read-write	mandatory
1.3.6.1.4.1.2516.2.7.2.9	ScalardropOutbound	read-write	mandatory
1.3.6.1.4.1.2516.2.7.2.10	ScalardropInbound	read-write	mandatory
1.3.6.1.4.1.2516.2.7.2.11	ScalarnoAnswerSec	read-write	mandatory	Length of time to wait after first ring back before deciding that the call isn't answered, in 10 mSec, default=3000.
1.3.6.1.4.1.2516.2.7.2.12	ScalarcontinuesNoSignal	read-write	mandatory	The max. length of time that no ringback was returned, in 10 mSec, default=4000.
1.3.6.1.4.1.2516.2.7.2.13	ScalarhelloEdge	read-write	mandatory	When to tell the app. that the remote connected, 1=Rising Endge - Immediately when connect is detected, 2=Falling Endge - After the end of the solution.
1.3.6.1.4.1.2516.2.7.2.14	ScalarmaxInterRing	read-write	mandatory	The max time between ring backs to decide that the call connected, in 10 mSec, default=800.
1.3.6.1.4.1.2516.2.7.2.15	ScalardialToneLocal	read-write	mandatory	Local Dial tone, default= .
1.3.6.1.4.1.2516.2.7.2.16	ScalardialToneIntl	read-write	mandatory	International Dial tone, default= .
1.3.6.1.4.1.2516.2.7.2.17	ScalardialToneXtra	read-write	mandatory	Extra Dial tone, default= .
1.3.6.1.4.1.2516.2.7.2.18	Scalarbusy1Tone	read-write	mandatory	Busy 1 tone, default= .
1.3.6.1.4.1.2516.2.7.2.19	Scalarbusy2Tone	read-write	mandatory	Busy 2 tone, default= .
1.3.6.1.4.1.2516.2.7.2.20	Scalarringback1Tone	read-write	mandatory	Ringback 1 tone, default= .
1.3.6.1.4.1.2516.2.7.2.21	Scalarringback2Tone	read-write	mandatory	Ringback 2 tone, default= .
1.3.6.1.4.1.2516.2.7.2.22	Scalardisconnect1Tone	read-write	mandatory	Disconnect 1 tone, default= .
1.3.6.1.4.1.2516.2.7.2.23	Scalardisconnect2Tone	read-write	mandatory	Disconnect 2 tone, default= .
1.3.6.1.4.1.2516.2.7.2.24	ScalarwaitForDropAckTimer	read-write	mandatory	The time to wait for drop ack, in mSec, default=2000.
1.3.6.1.4.1.2516.2.7.2.25	ScalarwaitForSiezeAckTimer	read-write	mandatory	The time to wait for sieze ack, in mSec, default=10000.
1.3.6.1.4.1.2516.2.7.2.26	ScalardigitsMode	read-write	mandatory	The pormat of sending the digits - 'T'=DTMF, 'M'=MF, 'P'=PULSE, default='T'.
1.3.6.1.4.1.2516.2.7.2.27	ScalarisDnisBeforeAni	read-write	mandatory	Does the ANI is previous to the DNIS, if 1(TRUE) - DNIS is before the ANI, default=1(TRUE).
1.3.6.1.4.1.2516.2.7.2.28	ScalarcollectAni	read-write	mandatory	Should the engine expect ANI. Default=1(TRUE)
1.3.6.1.4.1.2516.2.7.2.29	ScalarprewinkLength	read-write	mandatory	The max. length in 10mSec of the pre-wink. Default=0
1.3.6.1.4.1.2516.2.7.2.30	ScalarwinkLength	read-write	mandatory	The max. length of the wink generation, in 10 mSec. Default=15
1.3.6.1.4.1.2516.2.7.2.31	ScalarminWinkDetection	read-write	mandatory	The min. time in the receiver for detecting the wink, in 10 mSec. Default=10
1.3.6.1.4.1.2516.2.7.2.32	ScalarmaxWinkDetection	read-write	mandatory	The max. time in the receiver for detecting the wink, in 10 mSec. Default=32
1.3.6.1.4.1.2516.2.7.2.33	ScalarmaxDigitsDnis	read-write	mandatory	The max. # of DNIS digits for the receiver/transmiter. The max. # of digits for the DNIS+ANI in hardware dependenc-31.
1.3.6.1.4.1.2516.2.7.2.34	ScalarmaxDigitsAni	read-write	mandatory	The max.# of ANI digits for the receiver/transmiter. The max.# of digits for the DNIS+ANI in hardware dependenc-31.
1.3.6.1.4.1.2516.2.7.2.35	ScalarminTimeToDetectTransition	read-write	mandatory	The min. time to detect transition from 0 to 1 and from 1 to 0, in 10mSec. Default=5 (max. value is 255)
1.3.6.1.4.1.2516.2.7.2.36	ScalarcharBeforedigits	read-write	mandatory	the character before the digits, Default - '*', if there isnt any '' will be used
1.3.6.1.4.1.2516.2.7.2.37	ScalarcharBetweenAniAndDnis	read-write	mandatory	If there is ANI - this is the char between the DNIS and the ANI, Default - '*', if there isnt any '' will be used
1.3.6.1.4.1.2516.2.7.2.38	ScalarcharInTheEndOfDigits	read-write	mandatory	The char in the end of digits, Default - '*', if there isnt any '' will be used
1.3.6.1.4.1.2516.2.7.2.39	ScalarsendCharBeforeDigits	read-write	mandatory	The char before the digits, Default - '*', if there isnt any '' will be used
1.3.6.1.4.1.2516.2.7.2.40	ScalarsendDnisbeforeAni	read-write	mandatory	Does ANI is previous to the DNIS, if TRUE DNIS will be sent before the ANI, default DNIS before the ANI
1.3.6.1.4.1.2516.2.7.2.41	ScalarsendCharBetweenAniAndDnis	read-write	mandatory	If there is ANI - this is the char between the DNIS and the ANI, Default - '*', if there isnt any '' will be used
1.3.6.1.4.1.2516.2.7.2.42	ScalarsendCharcharInTheEndOfDigits	read-write	mandatory	The char in the end of the digits, Default - '*', if there isnt any '' will be used
1.3.6.1.4.1.2516.2.7.2.43	ScalarfileToPlay	read-write	mandatory	Path+name of .WAV file to play to user in case of Clear-Back.
1.3.6.1.4.1.2516.2.7.2.44	ScalarrepeatPlayFile	read-write	mandatory	Loop the playing of the Clear-Back .WAV file - '0' or '1' only.
1.3.6.1.4.1.2516.2.7.3	Nodegc
1.3.6.1.4.1.2516.2.7.3.1	ScalarprotocolConfigFileIn	read-write	mandatory	Protocol config file in.
1.3.6.1.4.1.2516.2.7.3.2	ScalarprotocolConfigFileOut	read-write	mandatory	Protocol config file out.
1.3.6.1.4.1.2516.2.7.3.3	ScalarlistOfProtocolConfigFilesIn	read-only	mandatory	A list of the possible protocol config files in.
1.3.6.1.4.1.2516.2.7.3.4	ScalarlistOfProtocolConfigFilesOut	read-only	mandatory	A list of the possible protocol config files out.
1.3.6.1.4.1.2516.2.7.4	Nodepri
1.3.6.1.4.1.2516.2.7.4.2	ScalarprotocolTrace	read-write	mandatory	Activating Dialogic PRI log tracer.
1.3.6.1.4.1.2516.2.7.5	Nodeerbium
1.3.6.1.4.1.2516.2.7.7	Nodeiridium
1.3.6.1.4.1.2516.2.7.7.2	ScalarhostID	read-write	mandatory	SS#7 host ID can be from 0-31. Default = 0.
1.3.6.1.4.1.2516.2.7.7.3	ScalarsIUIPorID	read-write	mandatory	SIU IP address or ID.
1.3.6.1.4.1.2516.2.7.20	ScalarchannelSelectionOrder	read-write	mandatory	Order in which the selection is done - Up (1) or Down (2) only.
1.3.6.1.4.1.2516.2.7.21	ScalarglareMode	read-write	mandatory	Glare mode selection - YIELD (1) or STAND (2) only.
1.3.6.1.4.1.2516.2.8	NodeincorrectPasswordCalls			Incorrect password call.
1.3.6.1.4.1.2516.2.8	Nodestat
1.3.6.1.4.1.2516.2.8.1	ScalartimeUpTotal	read-only	mandatory	Time up total.
1.3.6.1.4.1.2516.2.8.2	ScalartimeUpInterval	read-only	mandatory	Time up interval.
1.3.6.1.4.1.2516.2.8.3	ScalartimeSpanTotal	read-only	mandatory	Time span total.
1.3.6.1.4.1.2516.2.8.4	ScalartimeSpanInterval	read-only	mandatory	Time span interval.
1.3.6.1.4.1.2516.2.8.5	ScalarvgkLoginAttemptTotal	read-only	mandatory	GateKeeper login attempt total.
1.3.6.1.4.1.2516.2.8.6	ScalarvgkLoginAttemptInterval	read-only	mandatory	GateKeeper login attempt interval.
1.3.6.1.4.1.2516.2.8.7	ScalarvgkLoginSuccessTotal	read-only	mandatory	GateKeeper login success total.
1.3.6.1.4.1.2516.2.8.8	ScalarvgkLoginSuccessInterval	read-only	mandatory	GateKeeper login success interval.
1.3.6.1.4.1.2516.2.8.9	ScalarvgkLoginFailureTotal	read-only	mandatory	GateKeeper login failure total.
1.3.6.1.4.1.2516.2.8.10	ScalarvgkLoginFailureInterval	read-only	mandatory	GateKeeper login failure interval.
1.3.6.1.4.1.2516.2.8.11	ScalarvgkLogoutAttemptTotal	read-only	mandatory	GateKeeper logout attempt total.
1.3.6.1.4.1.2516.2.8.12	ScalarvgkLogoutAttemptInterval	read-only	mandatory	GateKeeper logout attempt interval.
1.3.6.1.4.1.2516.2.8.13	ScalarvgkLogoutSuccessTotal	read-only	mandatory	GateKeeper logout success total.
1.3.6.1.4.1.2516.2.8.14	ScalarvgkLogoutSuccessInterval	read-only	mandatory	GateKeeper logout success interval.
1.3.6.1.4.1.2516.2.8.15	ScalarvgkLogoutFailureTotal	read-only	mandatory	GateKeeper logout failure total.
1.3.6.1.4.1.2516.2.8.16	ScalarvgkLogoutFailureInterval	read-only	mandatory	GateKeeper logout failure interval.
1.3.6.1.4.1.2516.2.8.17	ScalarvgkDisconnectionTotal	read-only	mandatory	GateKeeper disconnection failure total.
1.3.6.1.4.1.2516.2.8.18	ScalarvgkDisconnectionInterval	read-only	mandatory	GateKeeper disconnection failure interval.
1.3.6.1.4.1.2516.2.8.19	ScalarcallValue	read-only	mandatory	Calls value.
1.3.6.1.4.1.2516.2.8.20	ScalarcallInterval	read-only	mandatory	Calls interval.
1.3.6.1.4.1.2516.2.8.21	ScalarcallMaxTotal	read-only	mandatory	Calls max total.
1.3.6.1.4.1.2516.2.8.22	ScalarcallMaxInterval	read-only	mandatory	Calls max interval.
1.3.6.1.4.1.2516.2.8.23	ScalarcallAverageTotal	read-only	mandatory	Calls average total.
1.3.6.1.4.1.2516.2.8.24	ScalarcallAverageInterval	read-only	mandatory	Calls average interval.
1.3.6.1.4.1.2516.2.8.25	ScalarcallTotal	read-only	mandatory	Calls total.
1.3.6.1.4.1.2516.2.8.26	ScalaruniversalCallValue	read-only	mandatory	Universal calls value.
1.3.6.1.4.1.2516.2.8.27	ScalaruniversalCallInterval	read-only	mandatory	Universal calls interval.
1.3.6.1.4.1.2516.2.8.28	ScalaruniversalCallMaxTotal	read-only	mandatory	Universal calls max total.
1.3.6.1.4.1.2516.2.8.29	ScalaruniversalCallMaxInterval	read-only	mandatory	Universal calls max interval.
1.3.6.1.4.1.2516.2.8.30	ScalaruniversalCallAverageTotal	read-only	mandatory	Universal calls average total.
1.3.6.1.4.1.2516.2.8.31	ScalaruniversalCallAverageInterval	read-only	mandatory	Universal calls average interval.
1.3.6.1.4.1.2516.2.8.32	ScalaruniversalCallTotal	read-only	mandatory	Universal calls total.
1.3.6.1.4.1.2516.2.8.33	ScalarvoiceCallValue	read-only	mandatory	Voice calls value.
1.3.6.1.4.1.2516.2.8.34	ScalarvoiceCallInterval	read-only	mandatory	Voice calls interval.
1.3.6.1.4.1.2516.2.8.35	ScalarvoiceCallMaxTotal	read-only	mandatory	Voice calls max total.
1.3.6.1.4.1.2516.2.8.36	ScalarvoiceCallMaxInterval	read-only	mandatory	Voice calls max interval.
1.3.6.1.4.1.2516.2.8.37	ScalarvoiceCallAverageTotal	read-only	mandatory	Voice calls average total.
1.3.6.1.4.1.2516.2.8.38	ScalarvoiceCallAverageInterval	read-only	mandatory	Voice calls average interval.
1.3.6.1.4.1.2516.2.8.39	ScalarvoiceCallTotal	read-only	mandatory	Voice calls total.
1.3.6.1.4.1.2516.2.8.40	ScalarfaxCallValue	read-only	mandatory	Fax calls value.
1.3.6.1.4.1.2516.2.8.41	ScalarfaxCallInterval	read-only	mandatory	Fax calls interval.
1.3.6.1.4.1.2516.2.8.42	ScalarfaxCallMaxTotal	read-only	mandatory	Fax calls max total.
1.3.6.1.4.1.2516.2.8.43	ScalarfaxCallMaxInterval	read-only	mandatory	Fax calls max interval.
1.3.6.1.4.1.2516.2.8.44	ScalarfaxCallAverageTotal	read-only	mandatory	Fax calls average total.
1.3.6.1.4.1.2516.2.8.45	ScalarfaxCallAverageInterval	read-only	mandatory	Fax calls average interval.
1.3.6.1.4.1.2516.2.8.46	ScalarfaxCallTotal	read-only	mandatory	Fax calls total.
1.3.6.1.4.1.2516.2.8.47	ScalarsncCallValue	read-only	mandatory	S&C calls value.
1.3.6.1.4.1.2516.2.8.48	ScalarsncCallInterval	read-only	mandatory	S&C calls interval.
1.3.6.1.4.1.2516.2.8.49	ScalarsncCallMaxTotal	read-only	mandatory	S&C calls max total.
1.3.6.1.4.1.2516.2.8.50	ScalarsncCallMaxInterval	read-only	mandatory	S&C calls max interval.
1.3.6.1.4.1.2516.2.8.51	ScalarsncCallAverageTotal	read-only	mandatory	S&C calls average total.
1.3.6.1.4.1.2516.2.8.52	ScalarsncCallAverageInterval	read-only	mandatory	S&C calls average interval.
1.3.6.1.4.1.2516.2.8.53	ScalarsncCallTotal	read-only	mandatory	S&C calls total.
1.3.6.1.4.1.2516.2.8.54	ScalariPhoneCallValue	read-only	mandatory	iPhone calls value.
1.3.6.1.4.1.2516.2.8.55	ScalariPhoneCallInterval	read-only	mandatory	iPhone calls interval.
1.3.6.1.4.1.2516.2.8.56	ScalariPhoneCallMaxTotal	read-only	mandatory	iPhone calls max total.
1.3.6.1.4.1.2516.2.8.57	ScalariPhoneCallMaxInterval	read-only	mandatory	iPhone calls max interval.
1.3.6.1.4.1.2516.2.8.58	ScalariPhoneCallAverageTotal	read-only	mandatory	iPhone calls average total.
1.3.6.1.4.1.2516.2.8.59	ScalariPhoneCallAverageInterval	read-only	mandatory	iPhone calls average interval.
1.3.6.1.4.1.2516.2.8.60	ScalariPhoneCallTotal	read-only	mandatory	iPhone calls total.
1.3.6.1.4.1.2516.2.8.61	ScalardialerCallValue	read-only	mandatory	Dialer calls value.
1.3.6.1.4.1.2516.2.8.62	ScalardialerCallInterval	read-only	mandatory	Dialer calls interval.
1.3.6.1.4.1.2516.2.8.63	ScalardialerCallMaxTotal	read-only	mandatory	Dialer calls max total.
1.3.6.1.4.1.2516.2.8.64	ScalardialerCallMaxInterval	read-only	mandatory	Dialer calls max interval.
1.3.6.1.4.1.2516.2.8.65	ScalardialerCallAverageTotal	read-only	mandatory	Dialer calls average total.
1.3.6.1.4.1.2516.2.8.66	ScalardialerCallAverageInterval	read-only	mandatory	Dialer calls average interval.
1.3.6.1.4.1.2516.2.8.67	ScalardialerCallTotal	read-only	mandatory	Dialer calls total.
1.3.6.1.4.1.2516.2.8.68	ScalarincorrectPasswordCallTotal	read-only	mandatory	incorrect password calls total.
1.3.6.1.4.1.2516.2.8.69	ScalarincorrectPasswordCallInterval	read-only	mandatory	incorrect password calls interval.
1.3.6.1.4.1.2516.2.8.72	ScalarnotSupportedCallTotal	read-only	mandatory	not supported calls total.
1.3.6.1.4.1.2516.2.8.73	ScalarnotSupportedCallInterval	read-only	mandatory	not supported calls interval.
1.3.6.1.4.1.2516.2.8.74	ScalarincomingInternetAttemptCallValue	read-only	mandatory	.
1.3.6.1.4.1.2516.2.8.75	ScalarincomingInternetAttemptCallInterval	read-only	mandatory	.
1.3.6.1.4.1.2516.2.8.76	ScalarincomingInternetAttemptCallMaxTotal	read-only	mandatory	.
1.3.6.1.4.1.2516.2.8.77	ScalarincomingInternetAttemptCallMaxInterval	read-only	mandatory	.
1.3.6.1.4.1.2516.2.8.78	ScalarincomingInternetAttemptCallAverageTotal	read-only	mandatory	.
1.3.6.1.4.1.2516.2.8.79	ScalarincomingInternetAttemptCallAverageInterval	read-only	mandatory	.
1.3.6.1.4.1.2516.2.8.80	ScalarincomingInternetAttemptCallTotal	read-only	mandatory	.
1.3.6.1.4.1.2516.2.8.81	ScalarincomingInternetSuccessCallValue	read-only	mandatory	.
1.3.6.1.4.1.2516.2.8.82	ScalarincomingInternetSuccessCallInterval	read-only	mandatory	.
1.3.6.1.4.1.2516.2.8.83	ScalarincomingInternetSuccessCallMaxTotal	read-only	mandatory	.
1.3.6.1.4.1.2516.2.8.84	ScalarincomingInternetSuccessCallMaxInterval	read-only	mandatory	.
1.3.6.1.4.1.2516.2.8.85	ScalarincomingInternetSuccessCallAverageTotal	read-only	mandatory	.
1.3.6.1.4.1.2516.2.8.86	ScalarincomingInternetSuccessCallAverageInterval	read-only	mandatory	.
1.3.6.1.4.1.2516.2.8.87	ScalarincomingInternetSuccessCallTotal	read-only	mandatory	.
1.3.6.1.4.1.2516.2.8.88	ScalarincomingTelephonyAttemptCallValue	read-only	mandatory	.
1.3.6.1.4.1.2516.2.8.89	ScalarincomingTelephonyAttemptCallInterval	read-only	mandatory	.
1.3.6.1.4.1.2516.2.8.90	ScalarincomingTelephonyAttemptCallMaxTotal	read-only	mandatory	.
1.3.6.1.4.1.2516.2.8.91	ScalarincomingTelephonyAttemptCallMaxInterval	read-only	mandatory	.
1.3.6.1.4.1.2516.2.8.92	ScalarincomingTelephonyAttemptCallAverageTotal	read-only	mandatory	.
1.3.6.1.4.1.2516.2.8.93	ScalarincomingTelephonyAttemptCallAverageInterval	read-only	mandatory	.
1.3.6.1.4.1.2516.2.8.94	ScalarincomingTelephonyAttemptCallTotal	read-only	mandatory	.
1.3.6.1.4.1.2516.2.8.95	ScalarincomingTelephonySuccessCallValue	read-only	mandatory	.
1.3.6.1.4.1.2516.2.8.96	ScalarincomingTelephonySuccessCallInterval	read-only	mandatory	.
1.3.6.1.4.1.2516.2.8.97	ScalarincomingTelephonySuccessCallMaxTotal	read-only	mandatory	.
1.3.6.1.4.1.2516.2.8.98	ScalarincomingTelephonySuccessCallMaxInterval	read-only	mandatory	.
1.3.6.1.4.1.2516.2.8.99	ScalarincomingTelephonySuccessCallAverageTotal	read-only	mandatory	.
1.3.6.1.4.1.2516.2.8.100	ScalarincomingTelephonySuccessCallAverageInterval	read-only	mandatory	.
1.3.6.1.4.1.2516.2.8.101	ScalarincomingTelephonySuccessCallTotal	read-only	mandatory	.
1.3.6.1.4.1.2516.2.8.102	ScalaroutgoingInternetCallValue	read-only	mandatory	.
1.3.6.1.4.1.2516.2.8.103	ScalaroutgoingInternetCallInterval	read-only	mandatory	.
1.3.6.1.4.1.2516.2.8.104	ScalaroutgoingInternetCallMaxTotal	read-only	mandatory	.
1.3.6.1.4.1.2516.2.8.105	ScalaroutgoingInternetCallMaxInterval	read-only	mandatory	.
1.3.6.1.4.1.2516.2.8.106	ScalaroutgoingInternetCallAverageTotal	read-only	mandatory	.
1.3.6.1.4.1.2516.2.8.107	ScalaroutgoingInternetCallAverageInterval	read-only	mandatory	.
1.3.6.1.4.1.2516.2.8.108	ScalaroutgoingInternetCallTotal	read-only	mandatory	.
1.3.6.1.4.1.2516.2.8.109	ScalaroutgoingTelephonyCallValue	read-only	mandatory	.
1.3.6.1.4.1.2516.2.8.110	ScalaroutgoingTelephonyCallInterval	read-only	mandatory	.
1.3.6.1.4.1.2516.2.8.111	ScalaroutgoingTelephonyCallMaxTotal	read-only	mandatory	.
1.3.6.1.4.1.2516.2.8.112	ScalaroutgoingTelephonyCallMaxInterval	read-only	mandatory	.
1.3.6.1.4.1.2516.2.8.113	ScalaroutgoingTelephonyCallAverageTotal	read-only	mandatory	.
1.3.6.1.4.1.2516.2.8.114	ScalaroutgoingTelephonyCallAverageInterval	read-only	mandatory	.
1.3.6.1.4.1.2516.2.8.115	ScalaroutgoingTelephonyCallTotal	read-only	mandatory	.
1.3.6.1.4.1.2516.2.8.116	ScalaraccountExpiredCallTotal	read-only	mandatory	.
1.3.6.1.4.1.2516.2.8.117	ScalaraccountExpiredCallInterval	read-only	mandatory	.
1.3.6.1.4.1.2516.2.8.118	ScalarvgkNotAvailableCallTotal	read-only	mandatory	.
1.3.6.1.4.1.2516.2.8.119	ScalarvgkNotAvailableCallInterval	read-only	mandatory	.
1.3.6.1.4.1.2516.2.8.120	ScalarvtgShutDownCallTotal	read-only	mandatory	.
1.3.6.1.4.1.2516.2.8.121	ScalarvtgShutDownCallInterval	read-only	mandatory	.
1.3.6.1.4.1.2516.2.8.122	ScalarvtgOutOfHoursCallTotal	read-only	mandatory	.
1.3.6.1.4.1.2516.2.8.123	ScalarvtgOutOfHoursCallInterval	read-only	mandatory	.
1.3.6.1.4.1.2516.2.8.124	ScalarvtgBusyCallTotal	read-only	mandatory	.
1.3.6.1.4.1.2516.2.8.125	ScalarvtgBusyCallInterval	read-only	mandatory	.
1.3.6.1.4.1.2516.2.8.126	ScalarvtgNoAnswerCallTotal	read-only	mandatory	.
1.3.6.1.4.1.2516.2.8.127	ScalarvtgNoAnswerCallInterval	read-only	mandatory	.
1.3.6.1.4.1.2516.2.8.128	ScalartelephoneBusyCallTotal	read-only	mandatory	.
1.3.6.1.4.1.2516.2.8.129	ScalartelephoneBusyCallInterval	read-only	mandatory	.
1.3.6.1.4.1.2516.2.8.130	ScalartelephoneNoAnswerCallTotal	read-only	mandatory	.
1.3.6.1.4.1.2516.2.8.131	ScalartelephoneNoAnswerCallInterval	read-only	mandatory	.
1.3.6.1.4.1.2516.2.8.132	ScalarmiscReasonDisconnectedCallTotal	read-only	mandatory	.
1.3.6.1.4.1.2516.2.8.133	ScalarmiscReasonDisconnectedCallInterval	read-only	mandatory	.
1.3.6.1.4.1.2516.2.8.134	ScalartotalDisconnectedCallsTotal	read-only	mandatory	.
1.3.6.1.4.1.2516.2.8.135	ScalartotalDisconnectedCallsInterval	read-only	mandatory	.
1.3.6.1.4.1.2516.2.8.136	ScalarvtgOutOfServiceCallTotal	read-only	mandatory	.
1.3.6.1.4.1.2516.2.8.137	ScalarvtgOutOfServiceCallInterval	read-only	mandatory	.
1.3.6.1.4.1.2516.2.8.138	ScalarunauthorizedUserCallTotal	read-only	mandatory	.
1.3.6.1.4.1.2516.2.8.139	ScalarunauthorizedUserCallInterval	read-only	mandatory	.
1.3.6.1.4.1.2516.2.8.140	ScalarresolveFailureCallTotal	read-only	mandatory	.
1.3.6.1.4.1.2516.2.8.141	ScalarresolveFailureCallInterval	read-only	mandatory	.
1.3.6.1.4.1.2516.2.8.142	ScalarpstnFailureCallTotal	read-only	mandatory	.
1.3.6.1.4.1.2516.2.8.143	ScalarpstnFailureCallInterval	read-only	mandatory	.
1.3.6.1.4.1.2516.2.8.144	ScalarabnormalTerminationCallTotal	read-only	mandatory	.
1.3.6.1.4.1.2516.2.8.145	ScalarabnormalTerminationCallInterval	read-only	mandatory	.
1.3.6.1.4.1.2516.2.9	NodedisconnectedCalls			Disconnected call.
1.3.6.1.4.1.2516.2.9	NodetrapParameters
1.3.6.1.4.1.2516.2.9.1	ScalartelephonyErrorDescription	not-accessible	mandatory	Detailed description of telephony protocol error occurs. Used with telephonyError enterprise trap.
1.3.6.1.4.1.2516.2.10	NodenotSupportedCalls			Not supported Call.

MIB Viewer

What's a MIB?

What's SNMP?

What's an OID?

SNMP Fundamentals

Using net-snmp

Configuring SNMP on Cisco devices

Configuring SNMP on Fortinet devices

Understanding MIBs

Troubleshooting SNMP

Searching OIDs

Modem/MTA bootfiles

DOCSIS Monitoring

Linux snmpd passthrough

VTGW-MIB

Bulk Translate

Search Vendor MIBs

Search Vendor Traps