Vsm-MIB
108 objects
No module-level DESCRIPTION found.
Imported Objects
| DV2-MIB | asn dv2 |
| groups MISSING | -- |
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | -- TRAP-TYPE -- |
| RFC1155-SMI | Counter |
| RFC1213-MIB | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.251.1.1.47 | Nodedv2Vsm | |||
| 1.3.6.1.4.1.251.1.1.47.1 | TablevsmCardCfgTable | not-accessible | mandatory | The VSM card configuration table. |
| 1.3.6.1.4.1.251.1.1.47.1.1 | RowvsmCardCfgTableEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.47.1.1.1 | ColumnvsmCardCfgIndex | read-only | mandatory | Index for VSM Card Cfg Table |
| 1.3.6.1.4.1.251.1.1.47.1.1.2 | ColumnvsmCardCfgBndlTslotStatus | read-only | mandatory | Enables the collection of Bundle and Timeslot status |
| 1.3.6.1.4.1.251.1.1.47.2 | TablevsmLinkTable | not-accessible | mandatory | Table for VSM Link configuration |
| 1.3.6.1.4.1.251.1.1.47.2.1 | RowvsmLinkEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.47.2.1.1 | ColumnvsmLinkLink | read-only | mandatory | Link Number for Table Entry |
| 1.3.6.1.4.1.251.1.1.47.2.1.2 | ColumnvsmLinkEnable | read-write | mandatory | Enable/Disable Link <DETAIL_DESCRIPTION> The user has the ability to enable or disable each of the LIM's links individually. |
| 1.3.6.1.4.1.251.1.1.47.2.1.3 | ColumnvsmLinkEnableStat | read-only | mandatory | Link Enable Status <DETAIL_DESCRIPTION> The current status of link depends on a valid lim type, the availability of a link on the LIM and LIM Configuration. |
| 1.3.6.1.4.1.251.1.1.47.2.1.4 | ColumnvsmLinkSigType | read-write | mandatory | Enable/Disable Signalling <DETAIL_DESCRIPTION> The user has the ability to enable or disable signalling for each of the LIM's links individually. |
| 1.3.6.1.4.1.251.1.1.47.3 | TablevsmTsCfgTable | not-accessible | mandatory | The timeslot configuration table. |
| 1.3.6.1.4.1.251.1.1.47.3.1 | RowvsmTsCfgTableEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.47.3.1.1 | ColumnvsmTsCfgLinkNo | read-write | mandatory | The link number. |
| 1.3.6.1.4.1.251.1.1.47.3.1.2 | ColumnvsmTsCfgTsNo | read-write | mandatory | The timeslot number of the link. |
| 1.3.6.1.4.1.251.1.1.47.3.1.3 | ColumnvsmTsCfgBundleNo | read-write | mandatory | The Bundle mapped to this timeslot. |
| 1.3.6.1.4.1.251.1.1.47.3.1.4 | ColumnvsmTsCfgAALTyp | read-write | mandatory | AAL type used for timeslot. This must match the AAL type used by the bundle to which this timeslot is assigned. |
| 1.3.6.1.4.1.251.1.1.47.3.1.5 | ColumnvsmTsCfgChanID | read-write | mandatory | The Channel ID (CID) this TS is mapped to. The CID must be unique across AAL2 VCs of an end-to-end connection. AAL2 only. |
| 1.3.6.1.4.1.251.1.1.47.3.1.6 | ColumnvsmTsCfgCmprssionTyp | read-write | mandatory | The voice compression algorithm being used for the timeslot. AAL2 only. |
| 1.3.6.1.4.1.251.1.1.47.3.1.7 | ColumnvsmTsCfgFaxMdmHndlng | read-write | mandatory | The option to handle Fax/Modem signal. AAL2 only. pass-through: make no change when tone is detected, if compressing then keep compressing.bypass: If compressi… |
| 1.3.6.1.4.1.251.1.1.47.3.1.8 | ColumnvsmTsCfgEchoCancel | read-write | mandatory | Indicate whether echo cancellation is enabled. |
| 1.3.6.1.4.1.251.1.1.47.3.1.9 | ColumnvsmTsCfgSilenceRmvl | read-write | mandatory | Allows for the configuration of silence removal. Auto will disable silence removal when a FAX/modem tone is detected. AAL2 only. |
| 1.3.6.1.4.1.251.1.1.47.3.1.10 | ColumnvsmTsCfgIdleDetect | read-write | mandatory | Indicate whether idle channel detection is enabled. If disabled this timeslot will always send cells, even when on hook. AAL2 only. |
| 1.3.6.1.4.1.251.1.1.47.3.1.11 | ColumnvsmTsCfgRmtLaw | read-write | mandatory | Indicates the remote VSM's companding type. u-law for T1, a-law for E1. Auto means use the same type as the local link. |
| 1.3.6.1.4.1.251.1.1.47.3.1.12 | ColumnvsmTsCfgSignalTyp | read-write | mandatory | This object specifies the signal type of the timeslot. None is used to turn off signaling to allow for data transport. |
| 1.3.6.1.4.1.251.1.1.47.3.1.13 | ColumnvsmTsCfgSigCndTypNB | read-write | mandatory | The object specifies the type of signaling conditioning to narrowband. |
| 1.3.6.1.4.1.251.1.1.47.3.1.14 | ColumnvsmTsCfgSigCndTypATM | read-write | mandatory | The object specifies the type of signaling conditioning to ATM. |
| 1.3.6.1.4.1.251.1.1.47.3.1.15 | ColumnvsmTsCfgDataCndTypNB | read-write | mandatory | The object specifies the type of data conditioning to narrowband. |
| 1.3.6.1.4.1.251.1.1.47.3.1.16 | ColumnvsmTsCfgDataCndTypATM | read-write | mandatory | The object specifies the type of data conditioning to ATM. |
| 1.3.6.1.4.1.251.1.1.47.3.1.17 | ColumnvsmTsCfgMulticast | read-write | mandatory | Multicast state: disabled = no multicast |
| 1.3.6.1.4.1.251.1.1.47.3.1.18 | ColumnvsmTsCfgOperStatus | read-only | mandatory | The operating status of the timeslot. |
| 1.3.6.1.4.1.251.1.1.47.3.1.19 | ColumnvsmTsCfgAdminStatus | read-write | mandatory | The administrative status of the timeslot. |
| 1.3.6.1.4.1.251.1.1.47.3.1.20 | ColumnvsmTsCfgValidity | read-write | mandatory | Set to invalid(2) to delete this row. |
| 1.3.6.1.4.1.251.1.1.47.4 | TablevsmBundleCfgTable | not-accessible | mandatory | The configuration table for a Bundle. <DETAIL_DESCRIPTION> A VSM Bundle specifies the service requirements of a virtual channel connection, including AAL type,… |
| 1.3.6.1.4.1.251.1.1.47.4.1 | RowvsmBundleCfgTableEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.47.4.1.1 | ColumnvsmBundleCfgNo | read-write | mandatory | The Bundle number. |
| 1.3.6.1.4.1.251.1.1.47.4.1.2 | ColumnvsmBundleCfgVcVpi | read-write | mandatory | The VPI of the VCC. |
| 1.3.6.1.4.1.251.1.1.47.4.1.3 | ColumnvsmBundleCfgVcVci | read-only | mandatory | The VCI of the VCC. This is the same as the Bundle no. for VSM. |
| 1.3.6.1.4.1.251.1.1.47.4.1.4 | ColumnvsmBundleCfgVcAALTyp | read-write | mandatory | The AAL type used for the Bundle. This must match the AAL type used by the timeslot that is assigned to this bundle. |
| 1.3.6.1.4.1.251.1.1.47.4.1.5 | ColumnvsmBundleCfgMaxTslot | read-write | mandatory | Specify the maximum number of timeslots that will be configured for the bundle. AAL2 only |
| 1.3.6.1.4.1.251.1.1.47.4.1.6 | ColumnvsmBundleCfgVcCDV | read-write | mandatory | ATM cell delay variation between VSMs (in 125 microsecond intervals) <DETAIL_DESCRIPTION> ATM cell delay variation between VSMs (in 125 microsecond intervals).… |
| 1.3.6.1.4.1.251.1.1.47.4.1.7 | ColumnvsmBundleCfgTimerCU | read-write | mandatory | Maximum amount of time (msec) to hold ATM cell before padding and sending. 0 results in an infinite wait. AAL2 only. |
| 1.3.6.1.4.1.251.1.1.47.4.1.8 | ColumnvsmBundleCfgCESPartialFill | read-write | mandatory | Specify the no. of user octets per cell for partial cell fill. AAL1 only. |
| 1.3.6.1.4.1.251.1.1.47.4.1.9 | ColumnvsmBundleCfgVcTyp | read-write | mandatory | The option to setup VCC. |
| 1.3.6.1.4.1.251.1.1.47.4.1.10 | ColumnvsmBundleCfgTrapCfg | read-write | mandatory | State change results in traps sent to the management station. |
| 1.3.6.1.4.1.251.1.1.47.4.1.11 | ColumnvsmBundleCfgOperStatus | read-only | mandatory | The operating status of the bundle. |
| 1.3.6.1.4.1.251.1.1.47.4.1.12 | ColumnvsmBundleCfgAdminStatus | read-write | mandatory | The administration status of the bundle. |
| 1.3.6.1.4.1.251.1.1.47.4.1.13 | ColumnvsmBundleCfgValidity | read-write | mandatory | Set to invalid(2) to delete this row. |
| 1.3.6.1.4.1.251.1.1.47.5 | TablevsmCardStatTable | not-accessible | mandatory | The VSM card status table. |
| 1.3.6.1.4.1.251.1.1.47.5.1 | RowvsmCardStatTableEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.47.5.1.1 | ColumnvsmCardStatIndex | read-only | mandatory | Index for VSM Card Status Table |
| 1.3.6.1.4.1.251.1.1.47.5.1.2 | ColumnvsmCardStatBdType | read-only | mandatory | VSM Hardware type |
| 1.3.6.1.4.1.251.1.1.47.5.1.3 | ColumnvsmCardStatHWSWCompatibility | read-only | mandatory | Hardware Software Compatibility between bin, Basecard & DOC |
| 1.3.6.1.4.1.251.1.1.47.5.1.4 | ColumnvsmCardStatBinPres | read-only | mandatory | Indicates presence of vsm.bin file |
| 1.3.6.1.4.1.251.1.1.47.5.1.5 | ColumnvsmCardStatBinRev | read-only | mandatory | The vsm.bin revision number |
| 1.3.6.1.4.1.251.1.1.47.5.1.6 | ColumnvsmCardStatBdRev | read-only | mandatory | The Card Hardware Feature Revision |
| 1.3.6.1.4.1.251.1.1.47.5.1.7 | ColumnvsmCardStatDoc1Type | read-only | mandatory | DOC 1 type supports 48 or 60 channels |
| 1.3.6.1.4.1.251.1.1.47.5.1.8 | ColumnvsmCardStatDoc1TypeRev | read-only | mandatory | DOC 1 Hardware Revision |
| 1.3.6.1.4.1.251.1.1.47.5.1.9 | ColumnvsmCardStatDoc2Type | read-only | mandatory | DOC 2 type supports 48 or 60 channels |
| 1.3.6.1.4.1.251.1.1.47.5.1.10 | ColumnvsmCardStatDoc2TypeRev | read-only | mandatory | DOC 2 Hardware Revision |
| 1.3.6.1.4.1.251.1.1.47.5.1.11 | ColumnvsmCardStatLimType | read-only | mandatory | LIM detected for the VSM card. |
| 1.3.6.1.4.1.251.1.1.47.6 | TablevsmTsStatTable | not-accessible | mandatory | The VSM Timeslot status table. |
| 1.3.6.1.4.1.251.1.1.47.6.1 | RowvsmTsStatTableEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.47.6.1.1 | ColumnvsmTsStatLinkNo | read-only | mandatory | The Link Number |
| 1.3.6.1.4.1.251.1.1.47.6.1.2 | ColumnvsmTsStatTSNo | read-only | mandatory | The timeslot number of the link. |
| 1.3.6.1.4.1.251.1.1.47.6.1.3 | ColumnvsmTsStatBundleNo | read-only | mandatory | The Bundle number. |
| 1.3.6.1.4.1.251.1.1.47.6.1.4 | ColumnvsmTsStatXmitBytes | read-only | mandatory | Number of bytes which have been transmitted <DETAIL_DESCRIPTION> Only applies to AAL2 operating mode. This object provides the user with a count of the number … |
| 1.3.6.1.4.1.251.1.1.47.6.1.5 | ColumnvsmTsStatRecvBytes | read-only | mandatory | Number of packets which have been reassembled <DETAIL_DESCRIPTION> Only applies to AAL2 operating mode. This object provides the user with a count of the numbe… |
| 1.3.6.1.4.1.251.1.1.47.6.1.6 | ColumnvsmTsStatUnderflows | read-only | mandatory | Number of underflow indications <DETAIL_DESCRIPTION> Only applies to AAL2 operating mode. This object provides the user with a count of the number of underflow… |
| 1.3.6.1.4.1.251.1.1.47.6.1.7 | ColumnvsmTsStatLostPackets | read-only | mandatory | Number of lost packets <DETAIL_DESCRIPTION> Only applies to AAL2 operating mode. This object provides the user with a count of the number of AAL2 packets which… |
| 1.3.6.1.4.1.251.1.1.47.6.1.8 | ColumnvsmTsStatAALType | read-only | mandatory | AAL type used for timeslot. |
| 1.3.6.1.4.1.251.1.1.47.6.1.9 | ColumnvsmTsStatVCID | read-only | mandatory | The number of the CID on which this BC is transmitting |
| 1.3.6.1.4.1.251.1.1.47.6.1.10 | ColumnvsmTsStatCID | read-only | mandatory | The number of the CID assigned to this BC |
| 1.3.6.1.4.1.251.1.1.47.6.1.11 | ColumnvsmTsStatActive | read-only | mandatory | State of Time Slot (Bearer Channel): yes = active; no = not active <DETAIL_DESCRIPTION> Provides the user with the activity mode of each Time Slot individually… |
| 1.3.6.1.4.1.251.1.1.47.6.1.12 | ColumnvsmTsStatDataLnk | read-only | mandatory | Indicates whether bearer channel is using DSP or Bypass |
| 1.3.6.1.4.1.251.1.1.47.6.1.13 | ColumnvsmTsStatBlocked | read-only | mandatory | Indicates whether bearer channel is in blocked mode |
| 1.3.6.1.4.1.251.1.1.47.6.1.14 | ColumnvsmTsStatIdleIdle | read-only | mandatory | Indicates whether bearer channel is on-hook or off-hook |
| 1.3.6.1.4.1.251.1.1.47.6.1.15 | ColumnvsmTsStatHold | read-only | mandatory | Indicates whether bearer channel is in hold mode |
| 1.3.6.1.4.1.251.1.1.47.6.1.16 | ColumnvsmTsStatRemoteCompressed | read-only | mandatory | Indicates use of compression algorithm on remote channel <DETAIL_DESCRIPTION> A yes indicates that a compression algorithm is being used on the remote channel … |
| 1.3.6.1.4.1.251.1.1.47.6.1.17 | ColumnvsmTsStatRemoteSilent | read-only | mandatory | Indicates whether remote channel is in silent mode or non silent mode <DETAIL_DESCRIPTION> |
| 1.3.6.1.4.1.251.1.1.47.6.1.18 | ColumnvsmTsStatCompressed | read-only | mandatory | Indicates use of compression algorithm on local channel <DETAIL_DESCRIPTION> A yes indicates that a compression algorithm is being used on the local channel da… |
| 1.3.6.1.4.1.251.1.1.47.6.1.19 | ColumnvsmTsStatSilent | read-only | mandatory | Time Slot Silence Status <DETAIL_DESCRIPTION> Indicates whether local channel is in silent mode (yes) or non silent mode (no) |
| 1.3.6.1.4.1.251.1.1.47.6.1.20 | ColumnvsmTsStatConditioning | read-only | mandatory | Conditioning status: yes = conditioning; no = not conditioning <DETAIL_DESCRIPTION> Data conditioning is initiated upon the detection of a variety of error sit… |
| 1.3.6.1.4.1.251.1.1.47.6.1.21 | ColumnvsmTsStatRemoteConditioning | read-only | mandatory | Conditioning status: yes = conditioning; no = not conditioning <DETAIL_DESCRIPTION> Data conditioning is initiated upon the detection of a variety of error sit… |
| 1.3.6.1.4.1.251.1.1.47.6.1.22 | ColumnvsmTsStatRIWF | read-only | mandatory | Remote interworking function alarm active <DETAIL_DESCRIPTION> |
| 1.3.6.1.4.1.251.1.1.47.6.1.23 | ColumnvsmTsStatLossofRefresh | read-only | mandatory | CAS Refresh status: yes = loss of refresh; no = no alarm <DETAIL_DESCRIPTION> This only applies when signalling is configured for the timeslot. When no signall… |
| 1.3.6.1.4.1.251.1.1.47.6.1.24 | ColumnvsmTsStatCasValuesPDH | read-only | mandatory | Value of A B C D bits being sent from VSM physical interface (PDH side) <DETAIL_DESCRIPTION> Provides a snapshot of the current state of the A B C D signalling… |
| 1.3.6.1.4.1.251.1.1.47.6.1.25 | ColumnvsmTsStatCasValuesATM | read-only | mandatory | Value of A B C D bits being sent from the ATM network <DETAIL_DESCRIPTION> Provides a snapshot of the current state of the A B C D signalling bits on the ATM s… |
| 1.3.6.1.4.1.251.1.1.47.6.1.26 | ColumnvsmTsStatReset | read-write | mandatory | Set to yes(1) to reset all counters in the Time Slot status table. |
| 1.3.6.1.4.1.251.1.1.47.7 | TablevsmBundleStatTable | not-accessible | mandatory | The VSM Bundle status table. |
| 1.3.6.1.4.1.251.1.1.47.7.1 | RowvsmBundleStatTableEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.251.1.1.47.7.1.1 | ColumnvsmBundleStatBundleNo | read-only | mandatory | The Bundle number. |
| 1.3.6.1.4.1.251.1.1.47.7.1.2 | ColumnvsmBundleStatXmitCells | read-only | mandatory | The count of the number of AAL2 cells transmitted |
| 1.3.6.1.4.1.251.1.1.47.7.1.3 | ColumnvsmBundleStatRecvCells | read-only | mandatory | The count of cells that have been played out to the PDH link. |
| 1.3.6.1.4.1.251.1.1.47.7.1.4 | ColumnvsmBundleStatPvcActive | read-only | mandatory | Is the PVC on this Bundle active. |
| 1.3.6.1.4.1.251.1.1.47.7.1.5 | ColumnvsmBundleStatAALType | read-only | mandatory | The AAL type used for the Bundle. |
| 1.3.6.1.4.1.251.1.1.47.7.1.6 | ColumnvsmBundleStatBufUndrflws | read-only | mandatory | The number of buffer underflows (AAL1 only). |
| 1.3.6.1.4.1.251.1.1.47.7.1.7 | ColumnvsmBundleStatBufOverflows | read-only | mandatory | The number of buffer overflows (AAL1 only). |
| 1.3.6.1.4.1.251.1.1.47.7.1.8 | ColumnvsmBundleStatPtrReframes | read-only | mandatory | The count of the number of events in which SDT pointer is not where it is expected (AAL1 only). <DETAIL_DESCRIPTION> The count of the number of events in which… |
| 1.3.6.1.4.1.251.1.1.47.7.1.9 | ColumnvsmBundleStatLostCells | read-only | mandatory | The number of AAL1 cells detected as lost prior to the destination |
| 1.3.6.1.4.1.251.1.1.47.7.1.10 | ColumnvsmBundleStatHdrErrors | read-only | mandatory | The count of all AAL1 and AAL2 header errors <DETAIL_DESCRIPTION> The Header Error count represents a sum of start pointer, sequence number and parity errors. |
| 1.3.6.1.4.1.251.1.1.47.7.1.11 | ColumnvsmBundleStatBadCID | read-only | mandatory | The count of the number of AAL2 cells having a bad CID |
| 1.3.6.1.4.1.251.1.1.47.7.1.12 | ColumnvsmBundleStatAAL2LostCells | read-only | mandatory | The count of the number of lost AAL2 cells <DETAIL_DESCRIPTION> When operating in AAL2 mode, a non-zero count of lost cells is an indication that invalid seque… |
| 1.3.6.1.4.1.251.1.1.47.7.1.13 | ColumnvsmBundleStatReset | read-write | mandatory | Set to yes(1) to reset all counters in the Bundle status table. |
| 1.3.6.1.4.1.251.1.1.47.7.1.14 | ColumnvsmBundleStatConditioning | read-only | mandatory | Conditioning status: yes = conditioning; no = not conditioning <DETAIL_DESCRIPTION> Data conditioning is initiated upon the detection of any or all of a variet… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| VciInteger | INTEGER (0..65535) | ||
| VpiInteger | INTEGER (0..255) | ||
| VsmBundle | INTEGER (1..127) |