MIB Viewer

WESTERMO-SW6-NWM-MIB

96 objects
MIB Module for the Westermo RT-300 Radio Modem Device - NWM definitions
Imported Objects
SNMPv2-CONFMODULE-COMPLIANCE OBJECT-GROUP
SNMPv2-SMIInteger32 IpAddress MODULE-IDENTITY OBJECT-TYPE
SNMPv2-TCDisplayString
OIDNameAccessStatusDescription
1.3.6.1.4.1.16177.1.400.2.3IdentitynwmMIB Module for the Westermo RT-300 Radio Modem Device - NWM definitions
1.3.6.1.4.1.16177.1.400.2.3.1Nodeconfiguration
1.3.6.1.4.1.16177.1.400.2.3.1.1NodecfgHttpReport
1.3.6.1.4.1.16177.1.400.2.3.1.1.1ScalarcfgHttpRprtServerUrlread-writecurrentURL of the remote server where DFS / IDF reports are sent to. **Format:** `http://<ipv4>:<port>/<path>` Applies to AP. 802.11n products only.
1.3.6.1.4.1.16177.1.400.2.3.1.3NodecfgChannelManager
1.3.6.1.4.1.16177.1.400.2.3.1.3.1ScalarcfgChMgrEnabledread-writecurrentEnable the ChannelManager.
1.3.6.1.4.1.16177.1.400.2.3.1.3.2ScalarcfgChMgrUsableFrequencyListread-writecurrentConfigure which frequency list is to be used as 'list of usable frequencies' by the ChannelManager. A value of -1 means no list defined using all frequencies a…
1.3.6.1.4.1.16177.1.400.2.3.1.3.3ScalarcfgChMgrDfsUseNvramread-writecurrentWhen 'enabled' the DFS states will be load / stored from / to the non-volatile ram device. Applies to AP. 802.11n products only.
1.3.6.1.4.1.16177.1.400.2.3.1.4NodecfgNwm
1.3.6.1.4.1.16177.1.400.2.3.1.4.1ScalarcfgNwmEnabledread-writecurrentEnable the Wireless Manager. Applies to AP. 802.11n products only.
1.3.6.1.4.1.16177.1.400.2.3.1.5NodecfgIdf
1.3.6.1.4.1.16177.1.400.2.3.1.5.1ScalarcfgIdfEnabledread-writecurrentEnable Interference Detection Function. IDF is only supported for devices with two radios. Applies to AP. 802.11n products only.
1.3.6.1.4.1.16177.1.400.2.3.1.5.3ScalarcfgIdfIntervalread-writecurrentReport interval in seconds. This value defines the interval when all available Reports are sent to the URL defined in cfgIdfHttpReportUrl. Applies to AP. 802.1…
1.3.6.1.4.1.16177.1.400.2.3.1.5.4ScalarcfgIdfNameread-writecurrentIDF Name. Can be used to set an unique identifier for the reports. Applies to AP. 802.11n products only.
1.3.6.1.4.1.16177.1.400.2.3.1.5.5NodecfgIdfTrigger
1.3.6.1.4.1.16177.1.400.2.3.1.5.5.1ScalarcfgIdfTrigRadarCntThread-writecurrentIDF trigger radar_count. Defines the number of radar events to trigger a report. Applies to AP. 802.11n products only.
1.3.6.1.4.1.16177.1.400.2.3.1.5.5.2ScalarcfgIdfTrigChanLoadThread-writecurrentIDF trigger channel_load. Defines the channel load ratio in percent to trigger a report. Applies to AP. 802.11n products only.
1.3.6.1.4.1.16177.1.400.2.3.1.5.5.3ScalarcfgIdfTrigAlienLoadThread-writecurrentIDF trigger alien_load. Defines the ratio of alien channel load in percent to trigger a report. Applies to AP. 802.11n products only.
1.3.6.1.4.1.16177.1.400.2.3.1.5.5.4ScalarcfgIdfTrigDomLoadThread-writecurrentIDF trigger domestic_load. Defines the ratio of domestic channel load in percent to trigger a report. Applies to AP. 802.11n products only.
1.3.6.1.4.1.16177.1.400.2.3.1.5.5.5ScalarcfgIdfTrigAlienMaxRssiThread-writecurrentIDF trigger alien_avg_rssi. Defines the average RSSI of alien traffic to trigger a report. Applies to AP. 802.11n products only.
1.3.6.1.4.1.16177.1.400.2.3.1.5.5.6ScalarcfgIdfTrigDomMaxRssiThread-writecurrentIDF trigger domestic_avg_rssi. Defines the average RSSI of domestic traffic to trigger a report. Applies to AP. 802.11n products only.
1.3.6.1.4.1.16177.1.400.2.3.1.5.10TablecfgIdfScanWorkTablenot-accessiblecurrentTable of scan works items. Applies to AP. 802.11n products only.
1.3.6.1.4.1.16177.1.400.2.3.1.5.10.1RowcfgIdfScanWorkTableEntrynot-accessiblecurrentScan work list. Applies to AP. 802.11n products only.
1.3.6.1.4.1.16177.1.400.2.3.1.5.10.1.1ColumncfgIdfScanWorkIndexnot-accessiblecurrentEntry index of Table. Applies to AP. 802.11n products only.
1.3.6.1.4.1.16177.1.400.2.3.1.5.10.1.2ColumncfgIdfScanWorkFreqread-writecurrentCenter frequency in MHz of the channel to scan. Set center frequency to 0 to disable this scan work item and all following items. Applies to AP. 802.11n produc…
1.3.6.1.4.1.16177.1.400.2.3.1.5.10.1.3ColumncfgIdfScanWorkActionread-writecurrentScan Work Action of the interference function. The following scan work actions are available: **none(0)** Scan work item and all following items of the table a…
1.3.6.1.4.1.16177.1.400.2.3.1.5.10.1.4ColumncfgIdfScanWorkSecondsread-writecurrentDuration of the Scan Work Item in seconds. At the end of the Scan Work a JSON formatted Report is generated and buffered. Set scan work time to 0 to disable th…
1.3.6.1.4.1.16177.1.400.2.3.1.6NodecfgChannelCleaner
1.3.6.1.4.1.16177.1.400.2.3.1.6.1ScalarcfgChanCleanEnabledread-writecurrentEnable ChannelCleaner Applies to AP. 802.11n products only.
1.3.6.1.4.1.16177.1.400.2.3.1.6.9ScalarcfgChanCleanDfsUseNvramread-writecurrentWhen 'enabled' the DFS states will be load/stored from/to the non-volatile ram device. Applies to AP. 802.11n products only.
1.3.6.1.4.1.16177.1.400.2.3.1.6.10ScalarcfgChanCleanUsableFrequencyListread-writecurrentConfigure which frequency list cfgWlanFIndex is to be used as 'list of usable frequencies' by ChannelCleaner. Applies to AP. 802.11n products only.
1.3.6.1.4.1.16177.1.400.2.3.1.7NodecfgAfm
1.3.6.1.4.1.16177.1.400.2.3.1.7.1ScalarcfgAfmEnabledread-writecurrentEnable the Area Frequency Manager on the local device. Applies to AP. 802.11n products only.
1.3.6.1.4.1.16177.1.400.2.3.1.7.2ScalarcfgAfmNameread-writecurrentName of the Area Frequency Manager on the local device. Applies to AP. 802.11n products only.
1.3.6.1.4.1.16177.1.400.2.3.1.7.3ScalarcfgAfmIndexread-writecurrentIndex of the Area which the local running Area Frequency Manager manages. Applies to AP. 802.11n products only.
1.3.6.1.4.1.16177.1.400.2.3.1.7.5ScalarcfgAfmAreaSizeread-writecurrentNumber of segments controlled by this AFM. Applies to AP. 802.11n products only.
1.3.6.1.4.1.16177.1.400.2.3.1.7.6ScalarcfgAfmPrimaryread-writecurrentEnable to set this AFM as primary in this area; set disable for stand-by. Applies to AP. 802.11n products only.
1.3.6.1.4.1.16177.1.400.2.3.1.7.7ScalarcfgAfmReportEnabledread-writecurrentWhen enabled(1) the AFM sends reports to the configured server URL (see cfgIdfServerUrl). Please refer to Software 6 Interface Description for more information…
1.3.6.1.4.1.16177.1.400.2.3.1.7.10NodecfgAfmRedundant
1.3.6.1.4.1.16177.1.400.2.3.1.7.10.1ScalarcfgAfmRedundantIpread-writecurrentIP address of the redundant Area Frequency Manager. Set to '0.0.0.0' to disable. Applies to AP. 802.11n products only.
1.3.6.1.4.1.16177.1.400.2.3.1.7.10.2ScalarcfgAfmRedundantNameread-writecurrentName of the redundant Area Frequency Manager. Applies to AP. 802.11n products only.
1.3.6.1.4.1.16177.1.400.2.3.1.7.20TablecfgAfmNeighbourTablenot-accessiblecurrentA table of the two neighbour (adjacent) Area Frequency Manager. Currently only up to two neighbour AFMs are supported. The area index of the neighbour AFM must…
1.3.6.1.4.1.16177.1.400.2.3.1.7.20.1RowcfgAfmNeighbourTableEntrynot-accessiblecurrentNeighbour AFM list. Applies to AP. 802.11n products only.
1.3.6.1.4.1.16177.1.400.2.3.1.7.20.1.1ColumncfgAfmNeighbourTableIndexnot-accessiblecurrentEntry index of Table. Applies to AP. 802.11n products only.
1.3.6.1.4.1.16177.1.400.2.3.1.7.20.1.2ColumncfgAfmNeighbourIpread-writecurrentIP address of the neighbour (adjacent) Area Frequency Manager. Applies to AP. 802.11n products only.
1.3.6.1.4.1.16177.1.400.2.3.1.7.20.1.3ColumncfgAfmNeighbourNameread-writecurrentName of the neighbour (adjacent) Area Frequency Manager. Applies to AP. 802.11n products only.
1.3.6.1.4.1.16177.1.400.2.3.1.7.30TablecfgAfmAfcTablenot-accessiblecurrentA table of all Area Frequency Clients controlled by the Area Frequency Manager running on this device. Applies to AP. 802.11n products only.
1.3.6.1.4.1.16177.1.400.2.3.1.7.30.1RowcfgAfmAfcTableEntrynot-accessiblecurrentAFC list. Applies to AP. 802.11n products only.
1.3.6.1.4.1.16177.1.400.2.3.1.7.30.1.1ColumncfgAfmAfcTableIndexnot-accessiblecurrentEntry index of Table. Applies to AP. 802.11n products only.
1.3.6.1.4.1.16177.1.400.2.3.1.7.30.1.2ColumncfgAfmAfcNameread-writecurrentName of the Area Frequency Client to control. Applies to AP. 802.11n products only.
1.3.6.1.4.1.16177.1.400.2.3.1.7.30.1.3ColumncfgAfmAfcIpread-writecurrentIP address of the Area Frequency Client to control. Applies to AP. 802.11n products only.
1.3.6.1.4.1.16177.1.400.2.3.1.8NodecfgAfc
1.3.6.1.4.1.16177.1.400.2.3.1.8.1ScalarcfgAfcEnabledread-writecurrentEnable the Area Frequency Client on the local device. Applies to AP. 802.11n products only.
1.3.6.1.4.1.16177.1.400.2.3.1.8.2ScalarcfgAfcNameread-writecurrentName of the Area Frequency Client on the local device. Applies to AP. 802.11n products only.
1.3.6.1.4.1.16177.1.400.2.3.1.8.3ScalarcfgAfcIndexread-writecurrentIndex of the Area Frequency Client within the local Area. Applies to AP. 802.11n products only.
1.3.6.1.4.1.16177.1.400.2.3.1.8.5ScalarcfgAfcBackupFreqread-writecurrentBackup frequency which the Area Frequency Client will use if the Area Frequency Manager is not present. Applies to AP. 802.11n products only.
1.3.6.1.4.1.16177.1.400.2.3.1.8.6ScalarcfgAfcReportEnabledread-writecurrentWhen enabled(1) the AFC sends reports to the configured server URL (see cfgIdfServerUrl). Please refer to Software 6 Interface Description for more information…
1.3.6.1.4.1.16177.1.400.2.3.1.8.10TablecfgAfcAfmTablenot-accessiblecurrentA table of Area Frequency Managers which are allowed to control this Area Frequency Client (AFC). Applies to AP. 802.11n products only.
1.3.6.1.4.1.16177.1.400.2.3.1.8.10.1RowcfgAfcAfmTableEntrynot-accessiblecurrentAFC list. Applies to AP. 802.11n products only.
1.3.6.1.4.1.16177.1.400.2.3.1.8.10.1.1ColumncfgAfcAfmTableIndexnot-accessiblecurrentEntry index of Table. Applies to AP. 802.11n products only.
1.3.6.1.4.1.16177.1.400.2.3.1.8.10.1.2ColumncfgAfcAfmNameread-writecurrentName of the connecting Area Frequency Manager. Applies to AP. 802.11n products only.
1.3.6.1.4.1.16177.1.400.2.3.1.8.10.1.3ColumncfgAfcAfmIpread-writecurrentIP address of the connecting Area Frequency Manager. Applies to AP. 802.11n products only.
1.3.6.1.4.1.16177.1.400.2.3.1.8.40TablecfgAfcNeighbourOffsetTablenot-accessiblecurrentTable of up to 24 segment offsets relevant for neighbour list. Applies to AP. 802.11n products only.
1.3.6.1.4.1.16177.1.400.2.3.1.8.40.1RowcfgAfcNeighbourOffsetTableEntrynot-accessiblecurrentNeighbour segment offset list
1.3.6.1.4.1.16177.1.400.2.3.1.8.40.1.1ColumncfgAfcNeighbourOffsetTableIndexnot-accessiblecurrentEntry index of Table. Applies to AP. 802.11n products only.
1.3.6.1.4.1.16177.1.400.2.3.1.8.40.1.2ColumncfgAfcNeighbourOffsetread-writecurrentSegment offset to be considered for neighbour list. Applies to AP. 802.11n products only.
1.3.6.1.4.1.16177.1.400.2.3.3Noderpc
1.3.6.1.4.1.16177.1.400.2.3.3.1NoderpcChannelManager
1.3.6.1.4.1.16177.1.400.2.3.3.1.1ScalarrpcChMgrHttpReportread-writecurrentRequests a HTTP report from the Channel Manager. Applies to AP. 802.11n products only.
1.3.6.1.4.1.16177.1.400.2.3.3.2NoderpcNwm
1.3.6.1.4.1.16177.1.400.2.3.3.2.1ScalarrpcNwmHttpReportread-writecurrentRequests a HTTP report from the Wireless Manager. Applies to AP. 802.11n products only.
1.3.6.1.4.1.16177.1.400.2.3.3.3NoderpcNvram
1.3.6.1.4.1.16177.1.400.2.3.3.3.1ScalarrpcNvramFreqStatesResetread-writecurrentResets the state of DFS frequencies in the Available Channel List which is stored in non-volatile memory. The device performs a reboot after resetting the stat…
1.3.6.1.4.1.16177.1.400.2.3.10000Nodeconformance
1.3.6.1.4.1.16177.1.400.2.3.10000.1Nodegroups
1.3.6.1.4.1.16177.1.400.2.3.10000.1.1NodegroupConfiguration
1.3.6.1.4.1.16177.1.400.2.3.10000.1.1.1GroupgroupCfgHttpReportcurrentHttpReport properties
1.3.6.1.4.1.16177.1.400.2.3.10000.1.1.2GroupgroupCfgIdfcurrentIDF configuration.
1.3.6.1.4.1.16177.1.400.2.3.10000.1.1.4GroupgroupCfgChannelManagercurrentChannelManager properties
1.3.6.1.4.1.16177.1.400.2.3.10000.1.1.5GroupgroupCfgNwmcurrentNWM properties
1.3.6.1.4.1.16177.1.400.2.3.10000.1.1.6GroupgroupCfgChannelCleanercurrentChannelCleaner properties
1.3.6.1.4.1.16177.1.400.2.3.10000.1.1.7NodegroupCfgAfm
1.3.6.1.4.1.16177.1.400.2.3.10000.1.1.7.1GroupgroupCfgAfmGlobalcurrentAfm general maintree properties
1.3.6.1.4.1.16177.1.400.2.3.10000.1.1.7.2GroupgroupCfgAfmRedundantcurrentAfm Redundant properties
1.3.6.1.4.1.16177.1.400.2.3.10000.1.1.7.3GroupgroupCfgAfmNeighbourTablecurrentAfm Neighbour properties
1.3.6.1.4.1.16177.1.400.2.3.10000.1.1.7.4GroupgroupCfgAfmAfcTablecurrentAfm Afc properties
1.3.6.1.4.1.16177.1.400.2.3.10000.1.1.8NodegroupCfgAfc
1.3.6.1.4.1.16177.1.400.2.3.10000.1.1.8.1GroupgroupCfgAfcGlobalcurrentAfc general maintree properties
1.3.6.1.4.1.16177.1.400.2.3.10000.1.1.8.2GroupgroupCfgAfcAfmTablecurrentAfc Afm properties
1.3.6.1.4.1.16177.1.400.2.3.10000.1.1.8.4GroupgroupCfgAfcNeighbourOffsetTablecurrentAfc neighbour segment offset properties
1.3.6.1.4.1.16177.1.400.2.3.10000.1.2NodegroupRpc
1.3.6.1.4.1.16177.1.400.2.3.10000.1.2.1GroupgroupRpcChannelManagercurrentRPCs for Channel Manager
1.3.6.1.4.1.16177.1.400.2.3.10000.1.2.2GroupgroupRpcNwmcurrentRPCs for NWM
1.3.6.1.4.1.16177.1.400.2.3.10000.1.2.3GroupgroupRpcNvramcurrentRPCs for Nvram Manager
1.3.6.1.4.1.16177.1.400.2.3.10000.2Nodecompliances
1.3.6.1.4.1.16177.1.400.2.3.10000.2.1CompliancecompliancecurrentImplementation Requirements for DT50 bindings