WESTERN-MULTIPLEX-MIB
149 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | Counter enterprises IpAddress OBJECT-TYPE |
| RFC1213-MIB | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1 | ScalarmgmtNMULinkTrapControl | read-write | mandatory | This persistent variable controls whether the Agent will attempt to send the 'nmuLinkTrap' trap whenever the link condition between Radio and the NMU has a tra… |
| 1.3.6.1.2.2 | ScalarmgmtNMULinkSeverity | read-write | mandatory | This persistent variable indicates the desired severity level to be associated with the log event and the SNMP trap that record the occurance of a particular e… |
| 1.3.6.1.2.3 | ScalarmgmtT1InputTrapControl | read-write | mandatory | This persistent variable controls whether the Agent will attempt to send the 't1InTrap' trap whenever the Radio has a transition of the T1 INPUT condition. The… |
| 1.3.6.1.2.4 | ScalarmgmtT1InputSeverity | read-write | mandatory | This persistent variable indicates the desired severity level to be associated with the log event and the SNMP trap that record the occurance of a particular e… |
| 1.3.6.1.2.5 | ScalarmgmtT1CodeViolationTrapControl | read-write | mandatory | This persistent variable controls whether the Agent will attempt to send the 't1CvTrap' trap whenever the Radio has a transition of the T1 Code Violation condi… |
| 1.3.6.1.2.6 | ScalarmgmtT1CodeViolationSeverity | read-write | mandatory | This persistent variable indicates the desired severity level to be associated with the log event and the SNMP trap that record the occurance of a particular e… |
| 1.3.6.1.2.7 | ScalarmgmtT1LineDriverTrapControl | read-write | mandatory | This persistent variable controls whether the Agent will attempt to send the 't1LoTrap' trap whenever the radio has a transition of the T1 line build out condi… |
| 1.3.6.1.2.8 | ScalarmgmtT1LineDriverSeverity | read-write | mandatory | This persistent variable indicates the desired severity level to be associated with the log event and the SNMP trap that record the occurance of a particular e… |
| 1.3.6.1.2.9 | ScalarmgmtT1AISTrapControl | read-write | mandatory | This persistent variable controls whether the Agent will attempt to send the 't1AisTrap' trap whenever the radio has a transition of its T1 AIS Output conditio… |
| 1.3.6.1.2.10 | ScalarmgmtT1AISSeverity | read-write | mandatory | This persistent variable indicates the desired severity level to be associated with the log event and the SNMP trap that record the occurance of a particular e… |
| 1.3.6.1.2.11 | ScalarmgmtRadioSyncTrapControl | read-write | mandatory | This persistent variable controls whether the Agent will attempt to send the 'radioSyncTrap' trap whenever the Radio has a transition of the Frame Loss Alarm. … |
| 1.3.6.1.2.12 | ScalarmgmtRadioSyncSeverity | read-write | mandatory | This persistent variable indicates the desired severity level to be associated with the log event and the SNMP trap that record the occurance of a particular e… |
| 1.3.6.1.2.13 | ScalarmgmtBitErrorTrapControl | read-write | mandatory | This persistent variable controls whether the Agent will attempt to send the 'berTrap' trap whenever the Radio has a transition of the Bit Error Rate 6 (or BER… |
| 1.3.6.1.2.14 | ScalarmgmtBitErrorSeverity | read-write | mandatory | This persistent variable indicates the desired severity level to be associated with the log event and the SNMP trap that record the occurance of a particular e… |
| 1.3.6.1.2.15 | ScalarmgmtFan1TrapControl | read-write | mandatory | This persistent variable controls whether the Agent will attempt to send the 'fan1Trap' trap whenever the FAN 1 Unit has a transition of its FAN alarm. The 'fa… |
| 1.3.6.1.2.16 | ScalarmgmtFan1Severity | read-write | mandatory | This persistent variable indicates the desired severity level to be associated with the log event and the SNMP trap that record the occurance of a particular e… |
| 1.3.6.1.2.17 | ScalarmgmtFan2TrapControl | read-write | mandatory | This persistent variable controls whether the Agent will attempt to send the 'fan2Trap' trap whenever the FAN2 Unit has a transition of its FAN alarm. The 'fan… |
| 1.3.6.1.2.18 | ScalarmgmtFan2Severity | read-write | mandatory | This persistent variable indicates the desired severity level to be associated with the log event and the SNMP trap that record the occurance of a particular e… |
| 1.3.6.1.2.19 | ScalarmgmtRxSynthTrapControl | read-write | mandatory | This persistent variable controls whether the Agent will attempt to send the 'rxSynthTrap' trap whenever the Radio has a transition of its receiver-sythesizer … |
| 1.3.6.1.2.20 | ScalarmgmtRxSynthSeverity | read-write | mandatory | This persistent variable indicates the desired severity level to be associated with the log event and the SNMP trap that record the occurance of a particular e… |
| 1.3.6.1.2.21 | ScalarmgmtTxSynthTrapControl | read-write | mandatory | This persistent variable controls whether the Agent will attempt to send the 'txSynthTrap' trap whenever the Radio has a transition of its tansmitter-synthesiz… |
| 1.3.6.1.2.22 | ScalarmgmtTxSynthSeverity | read-write | mandatory | This persistent variable indicates the desired severity level to be associated with the log event and the SNMP trap that record the occurance of a particular e… |
| 1.3.6.1.2.61 | ScalarmgmtTrapHysteresis | read-write | mandatory | This persistent variable indicates the desired hysteresis time value that allows the trap management sub-system to generate any of the 16 SNMP Western Multiple… |
| 1.3.6.1.4.1.3727 | Nodewestern-multiplex | |||
| 1.3.6.1.4.1.3727.20 | Nodetsunami100-06 | |||
| 1.3.6.1.4.1.3727.20.10 | Nodesystem | |||
| 1.3.6.1.4.1.3727.20.10.1 | Nodecomponent | |||
| 1.3.6.1.4.1.3727.20.10.1.1 | ScalarcompSerialNumber | read-only | mandatory | This persistent variable contains the primary serial number of this System. |
| 1.3.6.1.4.1.3727.20.10.1.10 | TablecompIDTable | not-accessible | mandatory | A table that identifies hardware components with embedded software within the system. If a system has no entries, then the system is assumed to be comprised on… |
| 1.3.6.1.4.1.3727.20.10.1.10.1 | RowcompIDEntry | not-accessible | mandatory | A row of the compIDTable that represents a single hardware component of the system. |
| 1.3.6.1.4.1.3727.20.10.1.10.1.1 | ColumncompIDSerialNum | read-only | mandatory | This persistent variable contains the serial number of the component. If the component has no serial number, then the variable has the value '<no-serial-number… |
| 1.3.6.1.4.1.3727.20.10.1.10.1.2 | ColumncompIDType | read-only | mandatory | This persistent variable contains the type of the component as evidence by name and part number. |
| 1.3.6.1.4.1.3727.20.10.1.10.1.3 | ColumncompIDLocation | read-only | mandatory | This variable contains the location of the component within the system. 'unknown' indicates that the location is not known. 'integral' indicates that the compo… |
| 1.3.6.1.4.1.3727.20.10.1.10.1.4 | ColumncompIDState | read-write | mandatory | This non-persistent variable contains the current state of the component. 'removed' indicates that the component has been removed, and has not been replaced. A… |
| 1.3.6.1.4.1.3727.20.10.2 | Nodeclock | |||
| 1.3.6.1.4.1.3727.20.10.2.1 | ScalarclockDateTime | read-write | mandatory | This variable contains the current date and time of the primary real time clock of the system. The format is MM/DD/YYYY HH:MM where: MM/DD/YYYY: is the month/d… |
| 1.3.6.1.4.1.3727.20.10.2.2 | ScalarclockTZOffset | read-write | mandatory | This persistent variable can be used by a Network Administrator to record the local time zone, time offset or day light savings time information. This informat… |
| 1.3.6.1.4.1.3727.20.10.3 | Nodeboot | |||
| 1.3.6.1.4.1.3727.20.10.3.1 | ScalarbootReboot | read-write | mandatory | Setting this non-persistent variable to 'force-reset' allows an SNMP user to force the platform to reboot. Setting this variable to 'normal' has no effect. 'no… |
| 1.3.6.1.4.1.3727.20.10.3.2 | ScalarbootDate | read-only | mandatory | This non-persistent variable contains a date and timestamp of the platform's Real Time Clock at the time of the most recent boot of the platform. The format is… |
| 1.3.6.1.4.1.3727.20.10.3.3 | ScalarbootPreviousDate | read-only | mandatory | This persistent variable contains a date and timestamp of the platform's Real Time Clock at the time of the platform boot of the system just prior to the most … |
| 1.3.6.1.4.1.3727.20.10.3.4 | ScalarbootRebootCount | read-only | mandatory | This persistent variable contains the number of platform reboots since the date specified in 'bootClearDate'. A value of '0', indicates that this counter was r… |
| 1.3.6.1.4.1.3727.20.10.3.5 | ScalarbootClearDate | read-write | mandatory | The SNMP user writing any value to this persistent variable, causes any input to be ignored, and the current date and time to be written to this variable. In a… |
| 1.3.6.1.4.1.3727.20.10.4 | Nodelog | |||
| 1.3.6.1.4.1.3727.20.10.4.1 | NodelogGenericTrap | This trap is generated by the SNMP Agent when the logging subsytem has added a system event that does not have a specific trap associated with it, and 'logTrap… | ||
| 1.3.6.1.4.1.3727.20.10.4.1 | ScalarlogMaxSize | read-write | mandatory | This persistent variable indicates the maximum size of the system event log. Some Western Multiplex platforms allow this variable to be modified, such that the… |
| 1.3.6.1.4.1.3727.20.10.4.2 | ScalarlogCurrentSize | read-only | mandatory | This non-persistent variable indicates the current number of the system event log records. The non-persistent system event log is a circular history or log of … |
| 1.3.6.1.4.1.3727.20.10.4.3 | ScalarlogIndexNumber | read-only | mandatory | This non-persistent variable increments every time a system event is added to the system log. It has an initial value of 0. When a log record is created or rep… |
| 1.3.6.1.4.1.3727.20.10.4.4 | ScalarlogCurrentHEALTH | read-only | mandatory | This non-persistent variable indicates the current health of the Network Management Unit, or NMU, System as determined by the contents of the system log. This … |
| 1.3.6.1.4.1.3727.20.10.4.5 | ScalarlogRadioHEALTH | read-only | mandatory | This non-persistent variable indicates the current health of the attached managed Radio system as determined by the contents of the system log. This variable i… |
| 1.3.6.1.4.1.3727.20.10.4.6 | ScalarlogSeverityFilter | read-write | mandatory | This persistent variable indicates the desired severity level for adding a system event to the log based upon a severity level. This control variable thus acts… |
| 1.3.6.1.4.1.3727.20.10.4.7 | ScalarlogFilteredSpecific | read-only | mandatory | This non-persistent variable counts the number of occurrences of system events that were not logged to the system log because of a specific filter that specifi… |
| 1.3.6.1.4.1.3727.20.10.4.8 | ScalarlogFilteredSeverity | read-only | mandatory | This non-persistent variable counts the number of occurrences of system events that where not logged to the system event log, because 'logSeverityFilter' restr… |
| 1.3.6.1.4.1.3727.20.10.4.9 | ScalarlogFilteredRules | read-only | mandatory | This non-persistent variable increments every time a system event occurs, that is not added to the system log, because of replacement rules. This counter has a… |
| 1.3.6.1.4.1.3727.20.10.4.15 | ScalarlogViewPageSize | read-write | mandatory | This persistent variable determines the maximum size of the 'logRecTable', as returned to an SNMP user. For system that are connected via wire-less communicati… |
| 1.3.6.1.4.1.3727.20.10.4.16 | ScalarlogViewPageControl | read-write | mandatory | This non-persistent variable allows a user to control the present page view of the 'logRecTable'. When 'logViewPageSize' is set at any value smaller than 'logM… |
| 1.3.6.1.4.1.3727.20.10.4.17 | ScalarlogViewSeverityFilter | read-write | mandatory | This persistent variable indicates the desired severity level or levels (and qualifiers) for viewing the 'logRecTable'. This control variable thus acts as a se… |
| 1.3.6.1.4.1.3727.20.10.4.18 | ScalarlogViewMethod | read-write | mandatory | This persistent variable determines the sort method used for retrieving the 'logRecTable'. 'chronological' allows the table to be viewed sorted by time, either… |
| 1.3.6.1.4.1.3727.20.10.4.19 | ScalarlogViewDirection | read-write | mandatory | This persistent variable determines the direction of the severity related sorting of log records used for retrieving the 'logRecTable'. 'critical-to-normal' al… |
| 1.3.6.1.4.1.3727.20.10.4.20 | ScalarlogViewAge | read-write | mandatory | This persistent variable determines the direction of the time related sorting of log records used for retrieving the 'logRecTable'. 'oldest-to-newest' allows t… |
| 1.3.6.1.4.1.3727.20.10.4.21 | ScalarlogViewEvents | read-only | mandatory | This non-persistent variable indicates the number of system events that would be displayable on all pages of the 'logRecTable' given the view filtering criteri… |
| 1.3.6.1.4.1.3727.20.10.4.30 | ScalarlogTrapSeverityFilter | read-write | mandatory | This persistent variable indicates the desired severity level or levels (and qualifiers) for the logging sub-system to generate a SNMP generic log trap, called… |
| 1.3.6.1.4.1.3727.20.10.4.31 | ScalarlogTrapHysteresis | read-write | mandatory | This persistent variable indicates the desired hysteresis time value that allows the logging sub-system to generate a SNMP generic log trap, called 'logGeneric… |
| 1.3.6.1.4.1.3727.20.10.4.40 | TablelogRecTable | not-accessible | mandatory | This table contains system log events records. The non-persistent system event log is a circular history or log of system events. A system event that effects h… |
| 1.3.6.1.4.1.3727.20.10.4.40.1 | RowlogRecEntry | not-accessible | mandatory | Current list of system log records as limited by the MIB paging, sorting and viewing filters. |
| 1.3.6.1.4.1.3727.20.10.4.40.1.1 | ColumnlogRecIndexNumber | read-write | mandatory | When a log record is created or replaced, the 'logIndexNumber' is incremented, then stored within the new log record's 'logRecIndexNumber'. Thus the log record… |
| 1.3.6.1.4.1.3727.20.10.4.40.1.2 | ColumnlogRecSeverity | read-only | mandatory | The severity level of the log record. 'critical' is the highest severity level, followed in decreasing order by 'major', 'minor', 'warning', and 'normal', whic… |
| 1.3.6.1.4.1.3727.20.10.4.40.1.3 | ColumnlogRecEvent | read-only | mandatory | The type of event recorded in the log record. See the product release note for detailed explanations of these events. The retrieval of any variable of the 'log… |
| 1.3.6.1.4.1.3727.20.10.4.40.1.4 | ColumnlogRecDescription | read-only | mandatory | This variable contains a textual details of the system log record. Each log record contains : 1) a timestamp indicating when this event last occurred; 2) a 32-… |
| 1.3.6.1.4.1.3727.20.10.5 | Nodetrap | |||
| 1.3.6.1.4.1.3727.20.10.5.1 | ScalartrapControl | read-write | mandatory | This persistent variable controls the generation of SNMP traps by the Agent within the NMU of the radio. 'disabled' forces the Agent to not generate any SNMP t… |
| 1.3.6.1.4.1.3727.20.10.5.1 | NodetrapsDisabled | This trap is sent when the SNMP Agent has generated and sent 'trapMaxPerWindow' traps in the time period specified by 'trapWindowPeriod', and another traps is … | ||
| 1.3.6.1.4.1.3727.20.10.5.2 | ScalartrapClearDate | read-write | mandatory | The SNMP user writing any value to this variable, causes the following variables to be modified: 1) 'trapMgrCounter' variables of the 'trapMgrTable' are cleare… |
| 1.3.6.1.4.1.3727.20.10.5.3 | TabletrapMgrTable | not-accessible | mandatory | This table contains a list of trap managers that the Agent must attempt to sent its traps, assuming other controls (or filters) allow. Each row of this table i… |
| 1.3.6.1.4.1.3727.20.10.5.3.1 | RowtrapMgrEntry | not-accessible | mandatory | Current SNMP Trap Manager information for a specific Manager. |
| 1.3.6.1.4.1.3727.20.10.5.3.1.1 | ColumntrapMgrIndex | read-only | mandatory | The index number of this row, which describes a trap manager. The index number of remaining trap managers will not be renumbered, if a trap manager is added or… |
| 1.3.6.1.4.1.3727.20.10.5.3.1.2 | ColumntrapMgrAddress | read-write | mandatory | This persistent variable contains the IP address of a SNMP Trap manager. This implementation allows a maximum of 5 trap managers to be defined. A manager can b… |
| 1.3.6.1.4.1.3727.20.10.5.3.1.3 | ColumntrapMgrControl | read-write | mandatory | This persistent variable controls whether the Agent will attempt to sent a trap to the specific manager, depending upon other controls (or filters). If these c… |
| 1.3.6.1.4.1.3727.20.10.5.3.1.4 | ColumntrapMgrCounter | read-only | mandatory | The number of SNMP traps that have been sent to this manager by the Agent, since the date and time specified by 'trapClearDate'. This counter can be cleared by… |
| 1.3.6.1.4.1.3727.20.10.5.4 | ScalartrapFlow | read-write | mandatory | This variable indicates whether the Agent has its ability to send SNMP traps limited because it has sent 'trapMaxPerWindow' traps during a time period specifie… |
| 1.3.6.1.4.1.3727.20.10.5.5 | ScalartrapLastTimestamp | read-only | mandatory | This variable contains the Date and Time that the Agent attempted to send the last trap. (The time the Agent formatted the SNMP trap packet and delivered it to… |
| 1.3.6.1.4.1.3727.20.10.5.6 | ScalartrapWindowPeriod | read-write | mandatory | This persistent variable indicates the time period in minutes that is used by the feedback/pin trap limiting algorithm as specified in RFC 1224. The smallest v… |
| 1.3.6.1.4.1.3727.20.10.5.7 | ScalartrapMaxPerWindow | read-write | mandatory | This persistent variable indicates the maximum number of traps that can occur and be sent during the time period specified by 'trapWindowPeriod', without the A… |
| 1.3.6.1.4.1.3727.20.10.5.10 | ScalartrapSequenceClearDate | read-write | mandatory | The SNMP user writing any value to this variable, causes the following variables to be modified: 1) 'trapSequenceNumber' variable is cleared. 2) 'trapSequenceC… |
| 1.3.6.1.4.1.3727.20.10.5.11 | ScalartrapSequenceNumber | read-only | mandatory | This persistent variable increments every time an enterprise or standard trap (coldStart, LinkUp, etc.) is generated by the Network Management Unit, or NMU. An… |
| 1.3.6.1.4.1.3727.20.10.5.12 | ScalartrapSeverityFilter | read-write | mandatory | This persistent variable indicates the desired severity level for sending a generated SNMP trap based upon this severity level. This control variable thus acts… |
| 1.3.6.1.4.1.3727.20.10.5.13 | ScalartrapCommunity | read-write | mandatory | This persistent variable identifies the community string to be used when sending traps to any of the trap managers specified in 'trapMgrTable'. All traps sent … |
| 1.3.6.1.4.1.3727.20.10.5.18 | ScalartrapFilteredSpecific | read-only | mandatory | This variable counts the number of occurrences of events that have an associated SNMP trap, and no trap was sent due to a trap filter that specifically disable… |
| 1.3.6.1.4.1.3727.20.10.5.19 | ScalartrapFilteredControl | read-only | mandatory | This variable counts the number of occurrences of events that have an associated SNMP trap, and no trap was sent due to the 'trapControl' trap filter since the… |
| 1.3.6.1.4.1.3727.20.10.5.20 | ScalartrapFilteredManager | read-only | mandatory | This variable counts the number of occurrences of events that have an associated SNMP trap, and no trap was sent due to the 'trapMgrControl' filters, or the 't… |
| 1.3.6.1.4.1.3727.20.10.5.21 | ScalartrapFilteredSeverity | read-only | mandatory | This variable counts the number of occurrences of events that have an associated SNMP trap, and no trap was sent due to the trap severity filter 'trapSeverityF… |
| 1.3.6.1.4.1.3727.20.10.5.22 | ScalartrapColdStartControl | read-write | mandatory | This persistent variable controls whether the Agent will attempt to sent a trap the MIB II 'coldStart' trap whenever the Network Management Unit, or NMU, reset… |
| 1.3.6.1.4.1.3727.20.10.5.23 | ScalartrapLinkDownControl | read-write | mandatory | This persistent variable controls whether the Agent will attempt to sent a trap the MIB II 'linkDown' trap whenever the Network Management Unit, or NMU, detect… |
| 1.3.6.1.4.1.3727.20.10.5.24 | ScalartrapLinkUpControl | read-write | mandatory | This persistent variable controls whether the Agent will attempt to sent a trap the MIB II 'linkUp' trap whenever the Network Management Unit, or NMU, detects … |
| 1.3.6.1.4.1.3727.20.10.6 | Nodeauth | |||
| 1.3.6.1.4.1.3727.20.10.6.1 | ScalarauthUnAuthIpAddr | read-only | mandatory | This variable contains the IP address of the last management station that attempted to access this Agent with an invalid community string. This object is used … |
| 1.3.6.1.4.1.3727.20.10.6.2 | ScalarauthUnAuthCommunity | read-only | mandatory | This variable contains the community string specified by the most recent unauthenticated attempt to access this Agent. This object is used as a variable bindin… |
| 1.3.6.1.4.1.3727.20.20 | Noderadio | |||
| 1.3.6.1.4.1.3727.20.20.1 | Nodeconfig | |||
| 1.3.6.1.4.1.3727.20.20.1.1 | ScalarcnfgT1LineCode | read-write | mandatory | This persistent variable contains the current T1 line encoding/decoding method. 'B8ZS' selects the Bipolar With 8-bit Zero Substitution encoding/decoding. 'AMI… |
| 1.3.6.1.4.1.3727.20.20.1.2 | ScalarcnfgT1LineBuildOut | read-write | mandatory | This persistent variable contains the current T1 Line Build Out configuration for the radio. For DSX-1 applications, line lengths from 0 to 655 feet (as measur… |
| 1.3.6.1.4.1.3727.20.20.1.3 | ScalarcnfgT1NearEndRadioLoopback | read-write | mandatory | This non-persistent variable contains the current state of the loopback mode for the radio side of the T1 channel of the radio. 'enabled' reconfigures the T1 d… |
| 1.3.6.1.4.1.3727.20.20.1.4 | ScalarcnfgT1FarEndRadioLoopback | read-write | mandatory | This non-persistent variable contains the current state of the loopback mode for the radio side of the T1 channel of the remote radio. 'enabled' reconfigures t… |
| 1.3.6.1.4.1.3727.20.20.1.5 | ScalarcnfgT1InputAlarm | read-write | mandatory | This non-persistent variable contains the configuration setting of the T1 channel input. It allows the SNMP user to control T1 channel input. 'enabled' enables… |
| 1.3.6.1.4.1.3727.20.20.1.6 | ScalarcnfgAIS | read-write | mandatory | This non-persistent variable contains the configuration setting of the AIS output. It allows the SNMP user to control AIS output. 'enabled' enables the AIS out… |
| 1.3.6.1.4.1.3727.20.20.1.7 | ScalarcnfgOrderwireAddr | read-write | mandatory | This persistent variable contains the current number of the two-digit engineering orderwire (EOW) phone number of the handset connected to the radio. The phone… |
| 1.3.6.1.4.1.3727.20.20.1.8 | ScalarcnfgLinkSecurityCode | read-write | mandatory | This persistent variable contains the current number of the 12-byte security code. It allows the SNMP user to read and set the link security code. The link sec… |
| 1.3.6.1.4.1.3727.20.20.1.9 | ScalarcnfgLearningFilter | read-write | mandatory | This persistent variable configures the learning filter. 'disabled' turns off the learning filter. 'enabled' turns on the learning filter. There is no default … |
| 1.3.6.1.4.1.3727.20.20.1.10 | ScalarcnfgFiberOpticInterface | read-write | mandatory | This persistent variable configures the fiber interface. 'disabled' turns off the fiber interface. 'enabled' turns on the fiber interface. There is no default … |
| 1.3.6.1.4.1.3727.20.20.1.11 | ScalarcnfgEthernetDuplex | read-write | mandatory | This persistent variable contains the current configuration of the ethernet communication mode. 'full-duplex' indicates ethernet communicates in full duplex mo… |
| 1.3.6.1.4.1.3727.20.20.1.12 | ScalarcnfgDataRate | read-only | mandatory | This persistent variable contains the current configuration of the data rate. 'full-duplex-45-MB' indicates 45 MB data rate with full duplex operation. datarat… |
| 1.3.6.1.4.1.3727.20.20.1.13 | ScalarcnfgInterfaceType | read-only | mandatory | This persistent variable contains the current configuration of interface type. 't1-100BaseT' indicates 100BaseT and a T1 channel. 't1-10BaseT' indicates 10Base… |
| 1.3.6.1.4.1.3727.20.20.1.14 | ScalarcnfgIDUSWVersion | read-only | mandatory | This persistent variable contains the current number of the 4-byte IDU software Version. There is no default value for this variable. |
| 1.3.6.1.4.1.3727.20.20.1.15 | ScalarcnfgNMUSWVersion | read-only | mandatory | This persistent variable contains the current number of the 4-byte NMU software Version. There is no default value for this variable. |
| 1.3.6.1.4.1.3727.20.20.2 | Nodestatus | |||
| 1.3.6.1.4.1.3727.20.20.2.1 | NodeIMPORTS | This persistent variable contains the current T1 line encoding/decoding method. 'B8ZS' selects the Bipolar With 8-bit Zero Substitution encoding/decoding. 'AMI… | ||
| 1.3.6.1.4.1.3727.20.20.2.1 | ScalarstatRadioLogHealth | read-only | mandatory | This non-persistent variable indicates the current health status of the radio, determined by the Network Management Unit, or NMU's system event log. This MIB v… |
| 1.3.6.1.4.1.3727.20.20.2.2 | ScalarstatNMULink | read-only | mandatory | This non-persistent variable contains the current status of the radio to nmu link . This MIB variable can be polled to provide a high-level status of the radio… |
| 1.3.6.1.4.1.3727.20.20.2.2 | Nodet1InTrap | This trap is generated by the SNMP Agent when the Agent has detected a transition in Radio, T1 Input condition. This trap may be filtered by 'mgmtT1InputTrapCo… | ||
| 1.3.6.1.4.1.3727.20.20.2.3 | ScalarstatAlarmSummary | read-only | mandatory | This non-persistent variable contains the current status of the radio. This MIB variable can be polled to provide a high-level status of the radio. 'alarm_unkn… |
| 1.3.6.1.4.1.3727.20.20.2.3 | Nodet1CvTrap | This trap is generated by the SNMP Agent when the Agent has detected a transition Radio's, Code Violation condition. This trap may be filtered by 'mgmtT1CodeVi… | ||
| 1.3.6.1.4.1.3727.20.20.2.4 | Nodet1LoTrap | This trap is generated by the SNMP Agent when the Agent has detected a transition in Radio, T1 line build out condition. This trap may be filtered by 'mgmtT1Li… | ||
| 1.3.6.1.4.1.3727.20.20.2.5 | Nodet1AisTrap | This trap is generated by the SNMP Agent when the Agent has detected a transition in the Radio's,T1 AIS Output condition. This trap may be filtered by 'mgmtT1A… | ||
| 1.3.6.1.4.1.3727.20.20.2.6 | NoderadioSyncTrap | This trap is generated by the SNMP Agent when the Agent has detected a transition in the Radio's, Frame Loss alarm. This trap may be filtered by 'mgmtRadioSync… | ||
| 1.3.6.1.4.1.3727.20.20.2.7 | NodeberTrap | This trap is generated by the SNMP Agent when the Agent has detected a transition in the Radio's, Bit Error Rate 6 (or BER6) Alarm. The 6 refers to a bit error… | ||
| 1.3.6.1.4.1.3727.20.20.2.8 | Nodefan1Trap | This trap is generated by the SNMP Agent when the Agent has detected a transition in the fan1 Unit's, alarm. This trap may be filtered by 'mgmtFan1TrapControl'… | ||
| 1.3.6.1.4.1.3727.20.20.2.9 | Nodefan2Trap | This trap is generated by the SNMP Agent when the Agent has detected a transition in the fan2 Unit's, alarm. This trap may be filtered by 'mgmtFan2TrapControl'… | ||
| 1.3.6.1.4.1.3727.20.20.2.10 | NoderxSynthTrap | This trap is generated by the SNMP Agent when the Agent has detected a transition in Radio's, receiver-synthesizer alarm condition. This trap may be filtered b… | ||
| 1.3.6.1.4.1.3727.20.20.2.11 | NodetxSynthTrap | This trap is generated by the SNMP Agent when the Agent has detected a transition in Radio's, transmitter-synthesizer alarm condition. This trap may be filtere… | ||
| 1.3.6.1.4.1.3727.20.20.2.21 | ScalarstatT1Input | read-only | mandatory | This non-persistent variable contains the current status of the radio. This MIB variable can be polled to provide a high-level status of the radio. 'alarm_unkn… |
| 1.3.6.1.4.1.3727.20.20.2.22 | ScalarstatT1CodeViolation | read-only | mandatory | This non-persistent variable contains the current status of the radio. This MIB variable can be polled to provide a high-level status of the radio. 'alarm_unkn… |
| 1.3.6.1.4.1.3727.20.20.2.23 | ScalarstatT1LineDriver | read-only | mandatory | This non-persistent variable contains the current status of the radio. This MIB variable can be polled to provide a high-level status of the radio. 'alarm_unkn… |
| 1.3.6.1.4.1.3727.20.20.2.24 | ScalarstatT1AIS | read-only | mandatory | This non-persistent variable contains the current status of the radio. This MIB variable can be polled to provide a high-level status of the radio. 'alarm_unkn… |
| 1.3.6.1.4.1.3727.20.20.2.25 | ScalarstatRadioSync | read-only | mandatory | This non-persistent variable contains the current status of the radio. This MIB variable can be polled to provide a high-level status of the radio. 'alarm_unkn… |
| 1.3.6.1.4.1.3727.20.20.2.26 | ScalarstatBitError | read-only | mandatory | This non-persistent variable contains the current status of the radio. This MIB variable can be polled to provide a high-level status of the radio. 'alarm_unkn… |
| 1.3.6.1.4.1.3727.20.20.2.27 | ScalarstatFan1 | read-only | mandatory | This non-persistent variable contains the current status of the radio's . This MIB variable can be polled to provide a high-level status of the radio. 'alarm_u… |
| 1.3.6.1.4.1.3727.20.20.2.28 | ScalarstatFan2 | read-only | mandatory | This non-persistent variable contains the current status of the radio's . This MIB variable can be polled to provide a high-level status of the radio. 'alarm_u… |
| 1.3.6.1.4.1.3727.20.20.2.29 | ScalarstatRxSynth | read-only | mandatory | This non-persistent variable contains the current status of the radio's . This MIB variable can be polled to provide a high-level status of the radio. 'alarm_u… |
| 1.3.6.1.4.1.3727.20.20.2.30 | ScalarstatTxSynth | read-only | mandatory | This non-persistent variable contains the current status of the radio's . This MIB variable can be polled to provide a high-level status of the radio. 'alarm_u… |
| 1.3.6.1.4.1.3727.20.20.3 | Nodemgmt | |||
| 1.3.6.1.4.1.3727.20.20.4 | Nodeperf | |||
| 1.3.6.1.4.1.3727.20.20.4.1 | ScalarperfCurrentBER | read-only | mandatory | This variable. 'perfCurrentBER' contains a calculation of the estimated bit error rate of the aggregate data channel, after FEC decoding. |
| 1.3.6.1.4.1.3727.20.20.4.2 | ScalarperfCurrentRSL | read-only | mandatory | This variable, 'perfCurrentRSL' contains the current received signal level, measured in dBm. The received signal level, or RSL, is measured in the Receiver Uni… |
| 1.3.6.1.4.1.3727.20.20.4.3 | ScalarperfErrorSeconds | read-only | mandatory | This variable. 'perfErrorSeconds' contains a count of the number of one second periods with one or more bit errors. |
| 1.3.6.1.4.1.3727.20.20.4.4 | ScalarperfSeverelyErroredSeconds | read-only | mandatory | This variable. 'perfSeverelyErroredSeconds' contains a count of the number of one second periods with an error rate greater than 10^-6 for the entire one secon… |
| 1.3.6.1.4.1.3727.20.20.4.5 | ScalarperfMinRSL | read-only | mandatory | This variable,'perfMinRSL' contains the lowest received signal level within the measuring period. The received signal level, or RSL, is measured in dBm, in the… |
| 1.3.6.1.4.1.3727.20.20.4.6 | ScalarperfMaxRSL | read-only | mandatory | This variable, 'perfMaxRSL' contains the highest received signal level within the measuring period. The received signal level, or RSL, is measured in dBm, in t… |
| 1.3.6.1.4.1.3727.20.20.4.7 | ScalarperfElapsedSecondsSinceReset | read-only | mandatory | This variable, 'perfElapsedSecondsSinceReset' contains a value which corresponds to the total number of seconds has elapsed since the start of the performance … |
| 1.3.6.1.4.1.3727.20.20.4.8 | ScalarperfHistoryReset | read-write | mandatory | This variable, 'perfHistoryReset' is a command to clear all the counters in the performance table. Setting this variable to 'history-reset' will cause all the … |