WL400-SNMPGEN-MIB
20 objects
The Compaq WL400 SNMP General MIB Module.
Imported Objects
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | RowStatus |
| WL400-GLOBAL-REG | wl400Generic wl400Modules |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.232.143.1.3 | IdentitysnmpGenMIBModule | The Compaq WL400 SNMP General MIB Module. | ||
| 1.3.6.1.4.1.232.144.1 | NodesnmpGenMIB | |||
| 1.3.6.1.4.1.232.144.1.1 | NodesnmpGenConf | |||
| 1.3.6.1.4.1.232.144.1.1.1 | NodesnmpGenGroups | |||
| 1.3.6.1.4.1.232.144.1.1.1.1 | GroupsnmpGenBasicGroup | current | The snmp general group. | |
| 1.3.6.1.4.1.232.144.1.1.2 | NodesnmpGenCompl | |||
| 1.3.6.1.4.1.232.144.1.1.2.1 | CompliancesnmpGenBasicCompl | current | The implementation requirements for an IEEE 802.11 Station. | |
| 1.3.6.1.4.1.232.144.1.2 | NodesnmpGenObjs | |||
| 1.3.6.1.4.1.232.144.1.2.1 | ScalarsnmpGenReadCommunityString | read-write | current | The community string to use for SNMP communication with this entity when the SNMP operation is a read operation. |
| 1.3.6.1.4.1.232.144.1.2.2 | ScalarsnmpGenWriteCommunityString | read-write | current | The community string to use for SNMP communication with this entity when the SNMP operation is a SET Request. When read, this object has an undefined value. Wh… |
| 1.3.6.1.4.1.232.144.1.2.3 | ScalarsnmpGenTrapDstMaxTableLength | read-only | current | The maximum number of entries in the Trap Destination Table. |
| 1.3.6.1.4.1.232.144.1.2.4 | TablesnmpGenTrapDstTable | not-accessible | current | The table containing management targets where notifications (SNMP traps) must be sent to. Syslog messages also use this table. |
| 1.3.6.1.4.1.232.144.1.2.4.1 | RowsnmpGenTrapDstEntry | not-accessible | current | An entry in the Trap Destination table. |
| 1.3.6.1.4.1.232.144.1.2.4.1.1 | ColumnsnmpGenTrapDstIndex | not-accessible | current | An index into the Trap Destination table. |
| 1.3.6.1.4.1.232.144.1.2.4.1.2 | ColumnsnmpGenTrapDstIpAddress | read-create | current | The IP address of a management station to send traps to. |
| 1.3.6.1.4.1.232.144.1.2.4.1.3 | ColumnsnmpGenTrapDstType | read-create | current | The type indicates what kind of notification is sent. When set to trapOnly(1), only SNMP traps are sent to the IP address. When set to syslogOnly(2), only sysl… |
| 1.3.6.1.4.1.232.144.1.2.4.1.4 | ColumnsnmpGenTrapDstRowStatus | read-create | current | The status value for creating and deleting rows in this table. |
| 1.3.6.1.4.1.232.144.1.2.5 | ScalarsnmpGenLockStatus | read-write | current | This object can be used to lock the SNMP agent. When locked, the agent becomes read-only, i.e. no objects can be written any more. This is useful in a relative… |
| 1.3.6.1.4.1.232.144.1.2.6 | ScalarsnmpGenChangeIPAddress | read-write | current | This object is used to change the fixed or 'remembered' IP address of an Access Point. When there is a DHCP/BOOTP server on the network, this variable is not n… |
| 1.3.6.1.4.1.232.144.1.2.7 | ScalarsnmpGenUseDHCP | read-write | current | This object controls DHCP operation. When set to always(1), the Access Point will not assume an infinite lease it was given but continue trying to obtain an IP… |