MIB Viewer

WWP-GENERIC-IGMP-SNOOP-MIB

42 objects
Revised with 2 new objects added, wwpGenIgmpSnoopLeaveMode wwpGenIgmpSnoopInqLeaveTimeout.0
OIDNameAccessStatusDescription
1.3.6.1.4.1.6141.2.19IdentitywwpGenIgmpSnoopMIBRevised with 2 new objects added, wwpGenIgmpSnoopLeaveMode wwpGenIgmpSnoopInqLeaveTimeout.0
1.3.6.1.4.1.6141.2.19.1NodewwpGenIgmpSnoopMIBObjects
1.3.6.1.4.1.6141.2.19.1.1NodewwpGenIgmpSnoop
1.3.6.1.4.1.6141.2.19.1.1.1ScalarwwpGenIgmpSnoopGlobalActivateread-writecurrentActivate the GenIgmp Box wide Snooping operation with a value of True(1) or stop it with False(2).
1.3.6.1.4.1.6141.2.19.1.1.2TablewwpGenIgmpSnoopActTablenot-accessiblecurrentThe (conceptual) table listing the vlans on which the igmp snoping is enabled/disabled.
1.3.6.1.4.1.6141.2.19.1.1.2.1RowwwpGenIgmpSnoopActEntrynot-accessiblecurrentAn entry (conceptual row) in the wwpGenIgmpSnoopActTable.
1.3.6.1.4.1.6141.2.19.1.1.2.1.1ColumnwwpGenIgmpSnoopActVlanIdread-onlycurrentThe vlan for which this igmp snooping can be enabled/disabled.
1.3.6.1.4.1.6141.2.19.1.1.2.1.2ColumnwwpGenIgmpSnoopRouterPortread-onlycurrentThe router port from which the igmp query messages are received, and joins/leaves messages are sent. If there is no router port associated, the object will ret…
1.3.6.1.4.1.6141.2.19.1.1.2.1.3ColumnwwpGenIgmpSnoopActivateread-writecurrentActivate the GenIgmp Snooping operation with a value of True(1) or stop it with False(2).
1.3.6.1.4.1.6141.2.19.1.1.3TablewwpGenIgmpSnoopTablenot-accessiblecurrentThe (conceptual) table listing the IP multicast groups for which there are members on particular vlans.
1.3.6.1.4.1.6141.2.19.1.1.3.1RowwwpGenIgmpSnoopEntrynot-accessiblecurrentAn entry (conceptual row) in the wwpGenIgmpSnoopTable.
1.3.6.1.4.1.6141.2.19.1.1.3.1.1ColumnwwpGenIgmpSnoopVlanIdread-onlycurrentThe vlan for which this entry contains information for an IP multicast group address.
1.3.6.1.4.1.6141.2.19.1.1.3.1.2ColumnwwpGenIgmpSnoopGroupAddressread-onlycurrentThe IP multicast group address for which this entry contains information.
1.3.6.1.4.1.6141.2.19.1.1.3.1.3ColumnwwpGenIgmpSnoopActivePortsread-onlycurrentThe Port Map of the active ports for the igmp filter indexed by wwpGenIgmpSnoopVlanId and wwpGenIgmpSnoopGroupAddress.
1.3.6.1.4.1.6141.2.19.1.1.3.1.4ColumnwwpGenIgmpSnoopQueryTimeread-onlycurrentThe time at which the last activity was observed on this stream.
1.3.6.1.4.1.6141.2.19.1.1.3.1.5ColumnwwpGenIgmpSnoopNoOfHostsread-onlydeprecatedThe number of hosts associated with this entry.
1.3.6.1.4.1.6141.2.19.1.1.4TablewwpGenIgmpSnoopStatsTablenot-accessiblecurrentThe (conceptual) table listing the igmp snoop stats per vlan.
1.3.6.1.4.1.6141.2.19.1.1.4.1RowwwpGenIgmpSnoopStatsEntrynot-accessiblecurrentAn entry (conceptual row) in the wwpGenIgmpSnoopStatsTable.
1.3.6.1.4.1.6141.2.19.1.1.4.1.1ColumnwwpGenIgmpSnoopStatsVlanIdread-onlycurrentThe vlan Id for which this igmp snooping can be enabled/disabled.
1.3.6.1.4.1.6141.2.19.1.1.4.1.2ColumnwwpGenIgmpSnoopQueryMessagesread-onlycurrentThe total number of query messages snooped.
1.3.6.1.4.1.6141.2.19.1.1.4.1.3ColumnwwpGenIgmpSnoopJoinMessagesread-onlycurrentThe total number of Join messages snooped.
1.3.6.1.4.1.6141.2.19.1.1.4.1.4ColumnwwpGenIgmpSnoopLeaveMessagesread-onlycurrentThe total number of leave messages snooped.
1.3.6.1.4.1.6141.2.19.1.1.4.1.5ColumnwwpGenIgmpSnoopRouterDiscardsread-onlycurrentThe total number of messages discarded by the Router.
1.3.6.1.4.1.6141.2.19.1.1.5ScalarwwpGenIgmpSnoopLingerTimeoutread-writecurrentThis value specifies the amount of time that a multicast filter will be in place after the last host has left. In essence it configures how long to filter the …
1.3.6.1.4.1.6141.2.19.1.1.6ScalarwwpGenIgmpSnoopExpiryTimeoutread-writecurrentThe interval of time for which an igmp protocol entry, is allowed to remain valid without any activity.
1.3.6.1.4.1.6141.2.19.1.1.7ScalarwwpGenIgmpSnoopQueryRespTimeoutread-writecurrentThe interval of time for which an igmp protocol entry, is allowed to wait for any igmp query. This refers to the default minimum query timeout on WWP devices.
1.3.6.1.4.1.6141.2.19.1.1.8ScalarwwpGenIgmpSnoopFilterActivateread-writecurrentActivate the GenIgmp Snoop Filtering operation with a value of True(1) or stop it with False(2).
1.3.6.1.4.1.6141.2.19.1.1.9TablewwpGenExtIgmpSnoopActEntryTablenot-accessiblecurrentA table that contains Vlan Specific igmp config information maintained by each Vlan.
1.3.6.1.4.1.6141.2.19.1.1.9.1RowwwpGenExtIgmpSnoopActEntrynot-accessiblecurrentA list of Vlan specific IGMP config parameters maintained by each Vlan.
1.3.6.1.4.1.6141.2.19.1.1.9.1.1ColumnwwpGenIgmpSnoopMinQueryTimeoutread-writecurrentThe minimum interval of time for which an igmp protocol entry associated with this vlan is allowed to wait for any igmp query.
1.3.6.1.4.1.6141.2.19.1.1.9.1.2ColumnwwpGenIgmpSnoopUnresolvedMcastFilterread-writecurrentSetting this object to 'true' will enable the Unresolved Multicast Filtering for the vlan specified by wwpGenIgmpSnoopActVlanId.
1.3.6.1.4.1.6141.2.19.1.1.9.1.3ColumnwwpGenIgmpSnoopPktPriorityread-writecurrentThe 802.1p Priority value for the igmp snoop pkts on this vlan.
1.3.6.1.4.1.6141.2.19.1.1.9.1.4ColumnwwpGenIgmpSnoopLeaveModeread-writecurrentSetting the igmp leave mode to 'fast(1)' will cause the multicast stream to be pruned as soon as a leave is received. If this object is set to 'inquisitive(2)'…
1.3.6.1.4.1.6141.2.19.1.1.10ScalarwwpGenIgmpSnoopInqLeaveTimeoutread-writecurrentThe interval of time in units of 0.1 ( tenth ) seconds for which the Group Specific Query, is allowed to wait for any response. The inquisitive leave timer is …
1.3.6.1.4.1.6141.2.19.1.1.11ScalarwwpGenIgmpSnoopUMFFilterGlobalread-writecurrentSetting this object to 'true' will enable the Unresolved Multicast Filtering (UMF) for the device. When 'true' unresolved multicast packets will not be forward…
1.3.6.1.4.1.6141.2.19.2NodewwpGenIgmpSnoopMIBNotificationPrefix
1.3.6.1.4.1.6141.2.19.2.0NodewwpGenIgmpSnoopMIBNotifications
1.3.6.1.4.1.6141.2.19.3NodewwpGenIgmpSnoopMIBConformance
1.3.6.1.4.1.6141.2.19.3.1NodewwpGenIgmpSnoopMIBCompliances
1.3.6.1.4.1.6141.2.19.3.2NodewwpGenIgmpSnoopMIBGroups
Type Definitions
NameSyntaxStatusDescription
PortListOCTET STRING (SIZE (0..255))currentEach octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents…
VlanIdINTEGER (1..4094)currentA 12-bit VLAN ID used in the VLAN Tag header.