MIB Viewer

WWP-L2-CF-TUNNEL-MIB

41 objects
This MIB module is for the Layer 2 Control Frame Tunneling in WWP Portal Products
Imported Objects
SNMPv2-SMICounter32 Integer32 MODULE-IDENTITY OBJECT-TYPE TimeTicks Unsigned32
SNMPv2-TCDisplayString MacAddress RowStatus TEXTUAL-CONVENTION TruthValue
WWP-SMIwwpModules
OIDNameAccessStatusDescription
1.3.6.1.4.1.6141.2.53IdentitywwpL2CFTunnelMIBThis MIB module is for the Layer 2 Control Frame Tunneling in WWP Portal Products
1.3.6.1.4.1.6141.2.53.1NodewwpL2CFTunnelMIBObjects
1.3.6.1.4.1.6141.2.53.1.1NodewwpL2CFTunnel
1.3.6.1.4.1.6141.2.53.1.1.1TablewwpL2CFTunnelTablenot-accessiblecurrentVLAN table
1.3.6.1.4.1.6141.2.53.1.1.1.1RowwwpL2CFTunnelEntrynot-accessiblecurrenttable of vlans
1.3.6.1.4.1.6141.2.53.1.1.1.1.1ColumnwwpL2CFTunnelVlanIdread-onlycurrent802.1Q VLAN ID (1-4094)
1.3.6.1.4.1.6141.2.53.1.1.1.1.2ColumnwwpL2CFTunnelOperStatusread-onlycurrentThe current operational state of tunnel.
1.3.6.1.4.1.6141.2.53.1.1.1.1.3ColumnwwpL2CFTunnelAdminStatusread-writecurrentThe administratively desired status of Layer 2 control frame handling.
1.3.6.1.4.1.6141.2.53.1.1.1.1.4ColumnwwpL2CFTunnelPriorityread-writecurrentThe 802.1p packet priority to be assigned to packets associated with this port that do not have an 802.1Q VLAN header.
1.3.6.1.4.1.6141.2.53.1.1.1.1.5ColumnwwpL2CFTunnelRowStatusread-writecurrentUsed to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, a manager must set this object to 'createAndGo'. …
1.3.6.1.4.1.6141.2.53.1.1.2TablewwpL2CFTProtocolTablenot-accessiblecurrentThe (conceptual) table listing the l2 control frame protocol status tunnels.
1.3.6.1.4.1.6141.2.53.1.1.2.1RowwwpL2CFTProtocolEntrynot-accessiblecurrentThe layer 2 control frame protocol tunnel entry.
1.3.6.1.4.1.6141.2.53.1.1.2.1.1ColumnwwpL2CFTVlanIdread-onlycurrent802.1Q VLAN ID (1-4094)
1.3.6.1.4.1.6141.2.53.1.1.2.1.2ColumnwwpL2CFTProtocolNumread-onlycurrentThis object represent the list of protocols the device can support.
1.3.6.1.4.1.6141.2.53.1.1.2.1.3ColumnwwpL2CFTDispositionTyperead-createcurrentSetting this object to 'discard' will cause wwpL2CFTProtocolNum frames arriving at the specified port to be discarded. NOTE: Setting this to 'peer' will cause …
1.3.6.1.4.1.6141.2.53.1.1.3TablewwpL2CFTStatsTablenot-accessiblecurrentA table that contains the frame counters for Layer 2 control frame handling.
1.3.6.1.4.1.6141.2.53.1.1.3.1RowwwpL2CFTStatsEntrynot-accessiblecurrentA list of Link Aggregation Control Protocol statistics for each port on this device.
1.3.6.1.4.1.6141.2.53.1.1.3.1.1ColumnwwpL2CFTStatsVlanIdread-onlycurrent802.1Q VLAN ID (1-4094)
1.3.6.1.4.1.6141.2.53.1.1.3.1.2ColumnwwpL2CFTStatsProtocolNumread-onlycurrentThis object represent the list of protocols the device can support.
1.3.6.1.4.1.6141.2.53.1.1.3.1.3ColumnwwpL2CFTStatsPacketsRxread-onlycurrentThe number of number of pkts ingressed matching protocol. This value is read-only.
1.3.6.1.4.1.6141.2.53.1.1.3.1.4ColumnwwpL2CFTStatsTunneledFramesread-onlycurrentThe number of number of pts that made tunneled. This value is read-only.
1.3.6.1.4.1.6141.2.53.1.1.3.1.5ColumnwwpL2CFTStatsDecodedFramesread-onlycurrentThe number of came in tunneled, then restored. This value is read-only.
1.3.6.1.4.1.6141.2.53.1.1.3.1.6ColumnwwpL2CFTStatsDecodedFailedread-onlycurrentThe number of failed to untunnel. This value is read-only.
1.3.6.1.4.1.6141.2.53.1.1.3.1.7ColumnwwpL2CFTStatsPeeredFramesread-onlycurrentThe number of number of peered packets. This value is read-only.
1.3.6.1.4.1.6141.2.53.1.1.3.1.8ColumnwwpL2CFTStatsDiscardFramesread-onlycurrentThe number of number of discarded packets. This value is read-only.
1.3.6.1.4.1.6141.2.53.1.1.3.1.9ColumnwwpL2CFTStatsTunFrameSubPortread-onlycurrentThe number of number of tunneled frames received on subscriber port. This value is read-only.
1.3.6.1.4.1.6141.2.53.1.1.4NodewwpL2CFTGlobalStats
1.3.6.1.4.1.6141.2.53.1.1.4.1ScalarwwpL2CFTGlobalStatsPacketsRxread-onlycurrentThe total number of number of frames ingressed matching protocol. This value is read-only.
1.3.6.1.4.1.6141.2.53.1.1.4.2ScalarwwpL2CFTGlobalStatsTunneledFramesread-onlycurrentThe total number of number of frames that made tunneled. This total value is read-only.
1.3.6.1.4.1.6141.2.53.1.1.4.3ScalarwwpL2CFTGlobalStatsDecodedFramesread-onlycurrentThe total number of frames that came in tunneled, then restored. This value is read-only.
1.3.6.1.4.1.6141.2.53.1.1.4.4ScalarwwpL2CFTGlobalStatsDecodedFailedread-onlycurrentSpecifies the total number of frames that failed to 'untunnel' on the vlan. This value is read-only.
1.3.6.1.4.1.6141.2.53.1.1.4.5ScalarwwpL2CFTGlobalStatsPeeredFramesread-onlycurrentThe total number of number of peered frames. This value is read-only.
1.3.6.1.4.1.6141.2.53.1.1.4.6ScalarwwpL2CFTGlobalStatsDiscardFramesread-onlycurrentThe total number of number of discarded frames. This value is read-only.
1.3.6.1.4.1.6141.2.53.1.1.4.7ScalarwwpL2CFTGlobalStatsTunFrameSubPortread-onlycurrentThe total number of number of tunneled frames received on subscriber port. This value is read-only.
1.3.6.1.4.1.6141.2.53.1.1.5ScalarwwpL2CFTResetStatCountersread-writecurrentTo reset L2 control frame statistic counters , this object should be set to 'reset'. A read on this object should return none(0).
1.3.6.1.4.1.6141.2.53.2NodewwpL2CFTunnelMIBNotificationPrefix
1.3.6.1.4.1.6141.2.53.2.0NodewwpL2CFTunnelMIBNotifications
1.3.6.1.4.1.6141.2.53.3NodewwpL2CFTunnelMIBConformance
1.3.6.1.4.1.6141.2.53.3.1NodewwpL2CFTunnelMIBCompliances
1.3.6.1.4.1.6141.2.53.3.2NodewwpL2CFTunnelMIBGroups
Type Definitions
NameSyntaxStatusDescription
VlanIdINTEGER (1..4094)currentA 12-bit VLAN ID used in the VLAN Tag header.