MIB Viewer

WWP-MAC-MGMT-MIB

47 objects
Increased maximum value for SAC learn counts.
Imported Objects
OIDNameAccessStatusDescription
1.3.6.1.4.1.6141.2.28IdentitywwpMacMgmtMIBIncreased maximum value for SAC learn counts.
1.3.6.1.4.1.6141.2.28.1NodewwpMacMgmtMIBObjects
1.3.6.1.4.1.6141.2.28.1.1NodewwpMacMgmt
1.3.6.1.4.1.6141.2.28.1.1.1TablewwpMacMgmtMacTablenot-accessiblecurrentThe (conceptual) table listing the mac addresses indexed by the Vlan, port and the macaddr.
1.3.6.1.4.1.6141.2.28.1.1.1.1RowwwpMacMgmtMacEntrynot-accessiblecurrentAn entry (conceptual row) in the wwpMacMgmtMacTable.
1.3.6.1.4.1.6141.2.28.1.1.1.1.1ColumnwwpMacMgmtVlanIDread-onlycurrentThe vlan id associated with wwpMacMgmtMacAddr and the wwpMacMgmtPortId.
1.3.6.1.4.1.6141.2.28.1.1.1.1.2ColumnwwpMacMgmtPortIdread-onlycurrentPort ID for the instance. Port ID's start at 1, and are consecutive for each additional port. This port Id should refer to the dot1dBasePort in the Dot1dBasePo…
1.3.6.1.4.1.6141.2.28.1.1.1.1.3ColumnwwpMacMgmtMacAddrread-onlycurrentA unicast MAC address which has either been learned by the port or has been statically configured.
1.3.6.1.4.1.6141.2.28.1.1.1.1.4ColumnwwpMacMgmtMacAddrModeread-writecurrentThe Mac Addr can be either dynamic or static. For the Static entries the aging time specified by dot1dTpAgingTime does not apply so they stay forever in the Ma…
1.3.6.1.4.1.6141.2.28.1.1.1.1.5ColumnwwpMacMgmtMacStatusread-onlycurrentThe Mac Address will be disabled or enabled depending upon the protective mode and its Mac Address limit. The added static Mac Address will always be enabled.
1.3.6.1.4.1.6141.2.28.1.1.1.1.6ColumnwwpMacMgmtMacRowStatusread-createcurrentUsed to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, a manager must set this object to 'createAndGo'. …
1.3.6.1.4.1.6141.2.28.1.1.2ScalarwwpMacMgmtMacResetread-writecurrentTo reset the Mac Table for all the ports. A read on this object will always return the 'none'.
1.3.6.1.4.1.6141.2.28.1.1.3TablewwpMacMgmtPMTablenot-accessiblecurrentThe (conceptual) table listing the protected mode attributes.
1.3.6.1.4.1.6141.2.28.1.1.3.1RowwwpMacMgmtPMEntrynot-accessiblecurrentAn entry (conceptual row) in the wwpMacMgmtPMTable.
1.3.6.1.4.1.6141.2.28.1.1.3.1.1ColumnwwpMacMgmtPMVlanIDread-onlycurrentThe vlan id associated with wwpMacMgmtMacAddr and the wwpMacMgmtPortId.
1.3.6.1.4.1.6141.2.28.1.1.3.1.2ColumnwwpMacMgmtPMPortIdread-onlycurrentPort ID for the instance. Port ID's start at 1, and are consecutive for each additional port. This port Id should refer to the dot1dBasePort in the Dot1dBasePo…
1.3.6.1.4.1.6141.2.28.1.1.3.1.3ColumnwwpMacMgmtPMLearnLimitread-writecurrentThe maximum number of Mac Addresses which will be learned by this Vlan/port pair. This limits applies only for the dynamic addresses.
1.3.6.1.4.1.6141.2.28.1.1.3.1.4ColumnwwpMacMgmtPMLearnCountread-onlycurrentThe number of Mac Addresses learned by this Vlan/Port pair. If the wwpMacMgmtMacStatus is enabled then the max value for this object should be equal to wwpMacM…
1.3.6.1.4.1.6141.2.28.1.1.3.1.5ColumnwwpMacMgmtPMStatusread-writecurrentTo enable the Protection Mode, wwpMacMgmtPMStatus should be set to enable.
1.3.6.1.4.1.6141.2.28.1.1.3.1.6ColumnwwpMacMgmtPMMacFlushread-writecurrentSetting this object to 'flush' causes all the dynamic MAC entries for the port/vlan specified by wwpMacMgmtPMPortId/wwpMacMgmtPMVlanID to be deleted. An SNMP r…
1.3.6.1.4.1.6141.2.28.1.1.4ScalarwwpMacMgmtCacheMacread-writecurrentSpecifies whether or not the snmp Agent should cache the Macs in the wwpMacMgmtCacheTable or not. Once a static Mac is added then this object should be set to …
1.3.6.1.4.1.6141.2.28.1.1.5TablewwpMacMgmtCacheMacTablenot-accessiblecurrentThe (conceptual) table listing the mac addresses indexed by the Vlan, port and the Mac Index.
1.3.6.1.4.1.6141.2.28.1.1.5.1RowwwpMacMgmtCacheMacEntrynot-accessiblecurrentAn entry (conceptual row) in the wwpMacMgmtCacheMacTable.
1.3.6.1.4.1.6141.2.28.1.1.5.1.1ColumnwwpMacMgmtCVlanIDread-onlycurrentThe vlan id associated with wwpMacMgmtCMacIndex and the wwpMacMgmtCPortId.
1.3.6.1.4.1.6141.2.28.1.1.5.1.2ColumnwwpMacMgmtCPortIdread-onlycurrentPort ID for the instance. Port ID's start at 1, and are consecutive for each additional port. This port Id should refer to the dot1dBasePort in the Dot1dBasePo…
1.3.6.1.4.1.6141.2.28.1.1.5.1.3ColumnwwpMacMgmtCMacIndexread-onlycurrentIndex for this Mac Address.
1.3.6.1.4.1.6141.2.28.1.1.5.1.4ColumnwwpMacMgmtCMacAddrread-onlycurrentA unicast MAC address which has either been learned by the port or has been statically configured.
1.3.6.1.4.1.6141.2.28.1.1.5.1.5ColumnwwpMacMgmtCMacAddrModeread-onlycurrentThe Mac Addr can be either dynamic or static. For the Static entries the aging time specified by dot1dTpAgingTime does not apply so they stay forever in the Ma…
1.3.6.1.4.1.6141.2.28.1.1.5.1.6ColumnwwpMacMgmtCMacStatusread-onlycurrentThe Mac Address will be disabled or enabled depending upon the protective mode and its Mac Address limit. The added static Mac Address will always be enabled.
1.3.6.1.4.1.6141.2.28.1.1.6TablewwpMacMgmtCacheMacCountTablenot-accessiblecurrentThe (conceptual) table listing the mac addresses indexed by the Vlan and the port.
1.3.6.1.4.1.6141.2.28.1.1.6.1RowwwpMacMgmtCacheMacCountEntrynot-accessiblecurrentAn entry (conceptual row) in the wwpMacMgmtCacheMacTable.
1.3.6.1.4.1.6141.2.28.1.1.6.1.1ColumnwwpMacMgmtCacheMacCountread-onlycurrentCount of Mac Addresses associated with this Cache Mac Entry. The count will be shown only for the Vlan/port combination which exists on the box.
1.3.6.1.4.1.6141.2.28.1.1.7TablewwpMacMgmtSacTablenot-accessiblecurrentThe (conceptual) table listing the security access control attributes.
1.3.6.1.4.1.6141.2.28.1.1.7.1RowwwpMacMgmtSacEntrynot-accessiblecurrentAn entry (conceptual row) in the wwpMacMgmtSacTable.
1.3.6.1.4.1.6141.2.28.1.1.7.1.1ColumnwwpMacMgmtSacVlanIDread-onlycurrentThe VLAN id for this SAC entry.
1.3.6.1.4.1.6141.2.28.1.1.7.1.2ColumnwwpMacMgmtSacPortIdread-onlycurrentPort ID for the instance. Port ID's start at 1, and are consecutive for each additional port. This port Id should refer to the dot1dBasePort in the Dot1dBasePo…
1.3.6.1.4.1.6141.2.28.1.1.7.1.3ColumnwwpMacMgmtSacLearnCountread-onlycurrentThe number of Mac Addresses learned by this Vlan/Port pair. If the wwpMacMgmtMacStatus is enabled then the max value for this object should be equal to wwpMacM…
1.3.6.1.4.1.6141.2.28.1.1.7.1.4ColumnwwpMacMgmtSacMaxLearnread-createcurrentThe maximum number of Mac Addresses which will be learned by this Vlan/port pair. This limits applies only for the dynamic addresses.
1.3.6.1.4.1.6141.2.28.1.1.7.1.5ColumnwwpMacMgmtSacLearnDisabledread-createcurrentSetting this object to 'true' will cause the learning for the port/vlan pair to be shut off.
1.3.6.1.4.1.6141.2.28.1.1.7.1.6ColumnwwpMacMgmtSacMacFlushread-createcurrentSetting this object to 'flush' causes all the dynamic MAC entries for the port/vlan specified by wwpMacMgmtSacPortId/wwpMacMgmtSacVlanID to be deleted. An SNMP…
1.3.6.1.4.1.6141.2.28.1.1.7.1.7ColumnwwpMacMgmtSacStatusread-createcurrentUsed to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, a manager must set this object to 'createAndGo'. …
1.3.6.1.4.1.6141.2.28.2NodewwpMacMgmtMIBNotificationPrefix
1.3.6.1.4.1.6141.2.28.2.0NodewwpMacMgmtMIBNotifications
1.3.6.1.4.1.6141.2.28.3NodewwpMacMgmtMIBConformance
1.3.6.1.4.1.6141.2.28.3.1NodewwpMacMgmtMIBCompliances
1.3.6.1.4.1.6141.2.28.3.2NodewwpMacMgmtMIBGroups
Type Definitions
NameSyntaxStatusDescription
VlanIdINTEGER (1..4094)currentA 12-bit VLAN ID used in the VLAN Tag header.